Precision Amada Fabrication Facility
Previous Page Listing ID#: 112792

Auction Location

Maspeth, NY 11378
Auction Dates and TimesSALE IS COMPLETED
Bidding Starts: Tuesday Jan 29, 9:00 AM
Bidding Ends: Thursday Feb 7, 2:00 PM
Auction Type
 Online Auction (local pick-up only)  VIEW ONLINE CATALOG
Company Information
Koster Industries Inc.

Website: kosterindustries.com

GoToAuction.com ID#: 5916
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
NOTICE: All Bidders and other persons attending this sale agree that they have read and had full knowledge of these terms and agree to be bound thereby. Posted Payment Due Date: 24 Hours from receipt of invoice Posted Last Day of Removal: BUYER INFORMATION: Each potential Buyer represents, warrants and certifies that it has provided (i) its full and accurate legal name and business address, and the full and accurate legal name and address of Buyer’s representative(s) attending and/or participating in the sale event of the Property, and (ii) the citizenship status of Buyer and its representative(s) and any foreign interest of Buyer or its representative(s) OUT OF COUNTRY RESIDENTS WILL NOT BE APPROVED TO BID WITHOUT A REFUNDABLE DEPOSIT PRIOR. PAYMENTS: All payments must be made in the form of Cash, Company Check – up to $1,000, Certified Funds over $1,000, Money Order, and Credit Cards with a 3% Processing charge. Koster Industries Inc. reserves the right to charge any buyers credit card for purchases made at the sale including all fees associated with if there is no communication between buyer and Koster Industries Inc. We will make multiple attempts to contact buyer then have the right to charge credit card associated with the account. Manner of payment is to be made out to Koster Industries Inc. Payments are due upon posted time of payment, any payments over the period of one week with no communication between buyer and auctioneer could be considered abandoned and Koster Industries Inc. Will reserve the right to re-sell any and all lots purchased. BUYER BEWARE: “THE BUYER ALONE IS RESPONSIBLE FOR CHECKING THE QUALITY AND SUITABILITY OF GOODS BEFORE A PURCHASE IS MADE”. Koster Industries Inc. makes no representations, warranties, promises, covenants or guarantees, expressed or implied, as to defects in or the completeness or accuracy of the description in any advertising of any item(s) being auctioned and is not responsible for any advertising discrepancies, descriptions, nomenclature or inaccuracies of any kind. ALL ITEMS ARE SOLD ON “AS IS, WHERE IS” BASIS AND WITH ALL FAULTS WITHOUT EXCEPTION AND WITH REMOVAL AT BUYERS SOLE RISK AND EXPENSE. THE AUCTIONEER MAKES NO REPRESENTATIONS, WARRANTIES, PROMISES, COVENANTS OR GUARANTEES OF ANY KIND, EXPRESSED OR IMPLIED, AS TO THE NATURE, QUALITY, DURABILITY, CAPABILITY, FUNCTION, PERFORMANCE, VALUE OR CONDITION OF THE ITEM(S) BEING AUCTIONED OR ITS (THEIR) SUITABILITY FOR ANY USE. THE AUCTIONEER EXPRESSLY AND SPECIFICALLY DISCLAIM, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. REMOVAL: All purchases must be removed not later than Posted Removal Time. No lot can, on any account, be removed during the sale. Removal shall be at the expense, risk, and liability of the purchaser. Purchases will be delivered only on presentation of paid bill. The Auctioneer shall not be responsible for goods not removed within the time allowed, but shall have the option to remove and store at the expense and risk of the purchaser any article purchased, but not paid for and removal of any of the goods. A storage charge of $750.00 USD will be applied to anyone who does not remove within the posted time limit without prior permission from our office. for insurance reasons Koster Industries Inc. does not supply any material handling devises or equipment including but not limited to forklift trucks, cranes, pallet jacks, hand trucks, Etc. We require valid insurance from all people who work inside the facility including all machinery movers, erectors, millwrights, or any buyer operating equipment or dismantling/moving machinery – NO EXEMPTIONS. Koster Industries Inc. does not pack, ship crate, transport or rig any items, we provide riggers/pack & ship companies information on our website as a courtesy, they are 3rd party contractors, Koster Industries is not responsible for rigging charges, damages, Etc. We must be supplied with an insurance certificate naming Koster Industries Inc. as additionally insured for all machinery movers or anyone operating equipment within the building – NO EXCEPTIONS RESPONSIBILITY FOR NON-DELIVERY: The Auctioneer shall not, in any event, be liable for non-delivery or for any other matter or thing, to any purchaser of any lot, other than for the return to the purchaser of the deposit or sum paid on said lot, should the purchaser be entitled thereto. CLAIMS: No claims will be allowed after removal of goods from premises. Koster is not responsible for any damage incurred by contractors or riggers, no rigger / customer can lay any claim to Koster for any and all damages SAFETY DEVICES: Articles purchased may not incorporate approved activating mechanisms, operating safety devices or safety guards, as required by OSHA or otherwise. It is purchaser’s responsibility that articles purchased be so equipped and safeguarded to meet OSHA and any other requirements before placing such articles into operation. INDEMNIFICATION: Purchaser agrees to indemnify and hold the Auctioneer harmless from and against all claims and liabilities relating to the condition or use of the articles purchased or failure of user to follow instructions, warnings or recommendations of the manufacturer, or to comply with federal, state and local laws applicable to such articles, including OSHA requirements, or for proximate or consequential damages, costs or legal expenses arising therefrom. COMPLIANCE WITH LAWS: Buyer shall comply with all U.S. export control laws and regulations. The Property sold under the Transaction Documents may be subject to the provisions of Export Administration Act of 1979 and the Export Administration Regulations promulgated thereunder, the Arms Export Control Act and the International Traffic in Arms Regulations, and the sanctions laws administered by the Office of Foreign Assets Control. Buyer acknowledges that these statues and regulations impose restrictions on import, export and transfer to third countries of commodities and related data, and that licenses from the U.S. Department of Commerce or U.S. Department of State may be required before such commodities or data can be transferred, and that such licenses may impose further restrictions on use and further transfer of such commodities and data. Buyer agrees (i) to notify Seller prior to any transfer of Property (including goods, commodities or data) purchased under the Transaction Documents to any parties outside of the United States, (ii) to provide an end-use certificate and a certification that the Property (including goods, commodities, and data) purchased under the Transaction Documents will not be transferred to any end-user or for any end-use that is prohibited by U. S. law, (iii) to provide proof of any required U. S. Automated Export System (AES) filing prior to export of any Property (including goods, commodities or data) purchased under the Transaction Documents, and (iv) that Seller reserves the right to cancel any sale at any time in the event it determines, in its sole discretion, that any transaction arising out of the Transaction Documents does or may violate applicable U.S. export control or similar laws. COMPLIANCE WITH TERMS OF SALE: In default of payment of bills in full within the time therein specified, the auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. Lots not paid for and removed within the time allowed herein may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charges of re-sale, will be charged to the defaulting purchaser. The execution, interpretation, and performance of the Transaction Documents shall be governed by, and construed in accordance with, the laws of the State of New York (without regard to its conflicts of law provisions). THE PARTIES HEREBY WAIVE THE RIGHT TO A JURY TRIAL IN ANY DISPUTE OF ANY CLAIM OR CAUSE OF ACTION BASED UPON OR ARISING OUT OF, DIRECTLY OR INDIRECTLY, THE TRANSACTION DOCUMENTS, ANY OF THE RELATED DOCUMENTS, ANY DEALINGS BETWEEN SELLER AND BUYER RELATING TO THE SUBJECT MATTER HEREOF OR THEREOF, AND/OR THE RELATIONSHIP THAT IS BEING ESTABLISHED BETWEEN SELLER AND BUYER. RISK TO PERSON AND PROPERTY: Persons attending during exhibition, sale or removal of goods assume all risks of damage of or loss to person and property and specifically release the auctioneer from liability therefore. Neither the Auctioneer nor his principal shall be liable by reason of any defect in or condition of the premises on which the sale is held. ADDITION TO OR WITHDRAWAL FROM SALE: The auctioneer reserves the right to withdraw from sale any of the property listed or to sell at this sale property not listed, and also reserves the right to group one or more lots into one or more selling lots or to subdivide into two or more selling lots. Whenever the best interest of the seller will be served, the auctioneer reserves the right to sell all the property listed, in bulk. SALE BY ESTIMATED WEIGHT, COUNT OR MEASURE: Where items are sold by estimated weight, count or measure, the purchaser will be billed for and required to pay for the estimated weight, count or measure. If upon delivery, any shortage exists, the purchaser will receive a refund at the rate of purchase. If there be an excess, the purchaser will be required to take and pay for such excess, at the rate of purchase. DISPUTE BETWEEN BIDDERS: If any dispute arises between two or more bidders, the auctioneer may decide the same or put the lot up for sale again at once, and resell to the highest bidder. The auctioneer’s decision shall be final and absolute. RESERVE: The auctioneer reserves the right to reject any and all bids. On lots upon which there is a reserve, the auctioneer shall have the right to bid on behalf of the Seller. RECORDS: The record of sale kept by the auctioneer and bookkeeper will be taken as final in the event of any dispute. AGENCY: The auctioneer is acting as agent only and is not responsible for the acts of its principals. SALES TAX: Purchaser shall also pay all applicable sales or use taxes imposed by all taxing authorities on such transaction unless purchaser shall present a resale certificate, certificate of exemption or the like, exempting the purchaser and auctioneer from the payment of any such sales and use taxes. BANKRUPTCY: If at any time prior to payment in full, purchaser files a petition in bankruptcy or for other similar protection from creditors, or an involuntary petition in bankruptcy or other similar proceeding is filed against the purchaser, then, at the option of the auctioneer, the sale may be voided. ADDITIONAL TERMS AND CONDITIONS: The auctioneer may add other terms and conditions of sale, such additional terms and conditions to be announced prior to the auction.
File Attachments
View PDF Brochure
Listing Information

ELECTRO-SERVO CNC TURRET PUNCH PRESS
2005 Amada EMK3610, 33 Ton, 60” x 100” Servo Electric Turret Punch, 60” x 98.4” travel, .187” max. sheet thickness, Fanuc AMNC PC Based CNC Control, 58 station, (4) auto index, brush table, serial no: 36102031

PUNCH / LASER CNC TURRET PUNCH PRESS
2001 Amada Apelio III 2510-V 22 Ton Turret Punch/2 KW Laser Combination, Fanuc AF2000C laser, Fanuc FS-160iL, 59.8” x 98.4” travel, .250” max. punching, .375” max. laser, 31 station, (3) auto index, chiller, dust collector, 24K hour blower and vacuum pump done at 23,495 hours, current hours on laser 33,980,  serial no: 3251005

CNC TURRET PUNCH PRESS
Amada Pega 244 22 Ton Turret Punch, Fanuc 6M CNC, 40’ X 40’ travel, 24 station thick turret, ball table, serial number: AP440042, mfg. date: 1987

DIE GRINDER
Amada TEG-160E Die grinder

LASER
Amada LC1212A2 Pulsar 1.5 KW Hybrid Laser, 49.2”” x 49.2” travel, .375” mild steel, .187” stainless steel, Fanuc 16L CNC control, Fanuc C1500B resonator, chiller, dust collector, serial number: 11212731, mfg. date: 1998

CNC PRESS BRAKES
2001 Amada FBD-1030 NT 110 Ton x 10’ 7-Axis CNC Press Brake, 118” overall bending length, 106” between housings, 5.9” stroke, 16.5” open height, 15.75” throat depth, 5-axis back gauge, Amada AMNC PC Control, bed crowing control, electric foot switch and full length treadle control,  serial number: 10300112

1999 Amada HFE8025S 88 Ton x 8’ 8-Axis CNC Press Brake, 101” overall bed length, 103” between housings, 7.9”” stroke, 18.5” open height, 16.5” throat depth, 5-axis back gauge, cnc crowning, Amada Operateur CNC control serial number: V991209

1999 Amada RG5020 LD 55 Ton x 6’ CNC Press Brake, 82” overall bending length, 59.8” between housings, 3.9” stroke, 14.6” open height, 15.75” throat depth, Amada LD 2-axis cnc control, serial number: 50200064

Amada RG125 138 Ton x 10’ CNC Press Brake, 122” overall bending length, 100.5” distance between housings, 3.9” stroke, 14.85” open height, 15.76” stroke, Amada NC9EX 3-axis cnc control, serial number: 01250679

Guifil PE-6-16, 17.5 Ton, up-acting press brake, 24″ overall bed length, 22’ between housings, 3.937″ stroke, 12” open height, Essay CNC 402 2-axis control, programmable ram and back gauge control, S/N: 423-0608

Large Quantity of Amada Punch and Press Brake Tooling

MECHANICAL SQUARING SHEAR
Amada M-3045 10’ x 3/16” Mechanical Shear, 39” programmable back gauge, 60 strokes per minute, rear sheet supports, 120” squaring arm, (2) 36” front sheet supports, electric foot switch control, serial number: 30450671

CNC FOLDING BRAKE
Roper Whitney AB1014KC 10’ x 14 Gauge Kombi CNC Folder W/New CNC Control in 2018, L-Shaped Back Gauge, Rotating Kombi Bending Beam, S/N: 591-6-99, New 1999

INSERTION PRESSES
Haeger 618 hardware insertion press, 6 ton, 18” throat, 0 – 8” adjustable stroke, 2 hp hydraulic motor, electric foot switch, modular bowl feeder, misc. tooling, serial number: 06L-00734, mfg. date: 1999

Pemserter series 4 hardware Insertion Press, 6 ton, 18” throat, adjustable stroke, serial number: K4-4566.

FORKLIFTS
Yale 5800# Capacity

Hyster 4500# Capacity

Toyota 3300# Capacity electric

Toyota 4500# Capacity electric pallet truck

Skyjack SJIII Scissor Lift

2007 Chevy C4500 13′ Box truck with power tailgate

WELDERS
Lincoln TIG 275 & 225 Tig Welders

Lors 40-KVA Spot Welder

Alphil 40-KVA Spot Welder

AIR COMPRESSORS
50-HP Quincy Screw-Type

20-HP Scales Reciprocating Type

MISCELLANEOUS EQUIPMENT & TOOLROOM
Lubow HPB-6 Bender

Enco Vari-Speed Vertical Mill

16″ DoAll Vertical Bandsaw

Reid 6″ x 18″ Hydraulic Feed Surface Grinder

Drill Presses

ALSO
Large Quantity Pallet Racking, Heavy Duty Canterliver Style Racking,


Auction License: 0867346-DCA
Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Sponsored Links

Precision Amada Fabrication Facility

Koster Industries Inc.

Koster Industries Inc.


Contact:
Phone:
Sale Location
56-01 55th Avenue
Maspeth, NY 11378
Sale Dates and Times
Sale Terms and Conditions
NOTICE: All Bidders and other persons attending this sale agree that they have read and had full knowledge of these terms and agree to be bound thereby. Posted Payment Due Date: 24 Hours from receipt of invoice Posted Last Day of Removal: BUYER INFORMATION: Each potential Buyer represents, warrants and certifies that it has provided (i) its full and accurate legal name and business address, and the full and accurate legal name and address of Buyer’s representative(s) attending and/or participating in the sale event of the Property, and (ii) the citizenship status of Buyer and its representative(s) and any foreign interest of Buyer or its representative(s) OUT OF COUNTRY RESIDENTS WILL NOT BE APPROVED TO BID WITHOUT A REFUNDABLE DEPOSIT PRIOR. PAYMENTS: All payments must be made in the form of Cash, Company Check – up to $1,000, Certified Funds over $1,000, Money Order, and Credit Cards with a 3% Processing charge. Koster Industries Inc. reserves the right to charge any buyers credit card for purchases made at the sale including all fees associated with if there is no communication between buyer and Koster Industries Inc. We will make multiple attempts to contact buyer then have the right to charge credit card associated with the account. Manner of payment is to be made out to Koster Industries Inc. Payments are due upon posted time of payment, any payments over the period of one week with no communication between buyer and auctioneer could be considered abandoned and Koster Industries Inc. Will reserve the right to re-sell any and all lots purchased. BUYER BEWARE: “THE BUYER ALONE IS RESPONSIBLE FOR CHECKING THE QUALITY AND SUITABILITY OF GOODS BEFORE A PURCHASE IS MADE”. Koster Industries Inc. makes no representations, warranties, promises, covenants or guarantees, expressed or implied, as to defects in or the completeness or accuracy of the description in any advertising of any item(s) being auctioned and is not responsible for any advertising discrepancies, descriptions, nomenclature or inaccuracies of any kind. ALL ITEMS ARE SOLD ON “AS IS, WHERE IS” BASIS AND WITH ALL FAULTS WITHOUT EXCEPTION AND WITH REMOVAL AT BUYERS SOLE RISK AND EXPENSE. THE AUCTIONEER MAKES NO REPRESENTATIONS, WARRANTIES, PROMISES, COVENANTS OR GUARANTEES OF ANY KIND, EXPRESSED OR IMPLIED, AS TO THE NATURE, QUALITY, DURABILITY, CAPABILITY, FUNCTION, PERFORMANCE, VALUE OR CONDITION OF THE ITEM(S) BEING AUCTIONED OR ITS (THEIR) SUITABILITY FOR ANY USE. THE AUCTIONEER EXPRESSLY AND SPECIFICALLY DISCLAIM, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. REMOVAL: All purchases must be removed not later than Posted Removal Time. No lot can, on any account, be removed during the sale. Removal shall be at the expense, risk, and liability of the purchaser. Purchases will be delivered only on presentation of paid bill. The Auctioneer shall not be responsible for goods not removed within the time allowed, but shall have the option to remove and store at the expense and risk of the purchaser any article purchased, but not paid for and removal of any of the goods. A storage charge of $750.00 USD will be applied to anyone who does not remove within the posted time limit without prior permission from our office. for insurance reasons Koster Industries Inc. does not supply any material handling devises or equipment including but not limited to forklift trucks, cranes, pallet jacks, hand trucks, Etc. We require valid insurance from all people who work inside the facility including all machinery movers, erectors, millwrights, or any buyer operating equipment or dismantling/moving machinery – NO EXEMPTIONS. Koster Industries Inc. does not pack, ship crate, transport or rig any items, we provide riggers/pack & ship companies information on our website as a courtesy, they are 3rd party contractors, Koster Industries is not responsible for rigging charges, damages, Etc. We must be supplied with an insurance certificate naming Koster Industries Inc. as additionally insured for all machinery movers or anyone operating equipment within the building – NO EXCEPTIONS RESPONSIBILITY FOR NON-DELIVERY: The Auctioneer shall not, in any event, be liable for non-delivery or for any other matter or thing, to any purchaser of any lot, other than for the return to the purchaser of the deposit or sum paid on said lot, should the purchaser be entitled thereto. CLAIMS: No claims will be allowed after removal of goods from premises. Koster is not responsible for any damage incurred by contractors or riggers, no rigger / customer can lay any claim to Koster for any and all damages SAFETY DEVICES: Articles purchased may not incorporate approved activating mechanisms, operating safety devices or safety guards, as required by OSHA or otherwise. It is purchaser’s responsibility that articles purchased be so equipped and safeguarded to meet OSHA and any other requirements before placing such articles into operation. INDEMNIFICATION: Purchaser agrees to indemnify and hold the Auctioneer harmless from and against all claims and liabilities relating to the condition or use of the articles purchased or failure of user to follow instructions, warnings or recommendations of the manufacturer, or to comply with federal, state and local laws applicable to such articles, including OSHA requirements, or for proximate or consequential damages, costs or legal expenses arising therefrom. COMPLIANCE WITH LAWS: Buyer shall comply with all U.S. export control laws and regulations. The Property sold under the Transaction Documents may be subject to the provisions of Export Administration Act of 1979 and the Export Administration Regulations promulgated thereunder, the Arms Export Control Act and the International Traffic in Arms Regulations, and the sanctions laws administered by the Office of Foreign Assets Control. Buyer acknowledges that these statues and regulations impose restrictions on import, export and transfer to third countries of commodities and related data, and that licenses from the U.S. Department of Commerce or U.S. Department of State may be required before such commodities or data can be transferred, and that such licenses may impose further restrictions on use and further transfer of such commodities and data. Buyer agrees (i) to notify Seller prior to any transfer of Property (including goods, commodities or data) purchased under the Transaction Documents to any parties outside of the United States, (ii) to provide an end-use certificate and a certification that the Property (including goods, commodities, and data) purchased under the Transaction Documents will not be transferred to any end-user or for any end-use that is prohibited by U. S. law, (iii) to provide proof of any required U. S. Automated Export System (AES) filing prior to export of any Property (including goods, commodities or data) purchased under the Transaction Documents, and (iv) that Seller reserves the right to cancel any sale at any time in the event it determines, in its sole discretion, that any transaction arising out of the Transaction Documents does or may violate applicable U.S. export control or similar laws. COMPLIANCE WITH TERMS OF SALE: In default of payment of bills in full within the time therein specified, the auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. Lots not paid for and removed within the time allowed herein may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charges of re-sale, will be charged to the defaulting purchaser. The execution, interpretation, and performance of the Transaction Documents shall be governed by, and construed in accordance with, the laws of the State of New York (without regard to its conflicts of law provisions). THE PARTIES HEREBY WAIVE THE RIGHT TO A JURY TRIAL IN ANY DISPUTE OF ANY CLAIM OR CAUSE OF ACTION BASED UPON OR ARISING OUT OF, DIRECTLY OR INDIRECTLY, THE TRANSACTION DOCUMENTS, ANY OF THE RELATED DOCUMENTS, ANY DEALINGS BETWEEN SELLER AND BUYER RELATING TO THE SUBJECT MATTER HEREOF OR THEREOF, AND/OR THE RELATIONSHIP THAT IS BEING ESTABLISHED BETWEEN SELLER AND BUYER. RISK TO PERSON AND PROPERTY: Persons attending during exhibition, sale or removal of goods assume all risks of damage of or loss to person and property and specifically release the auctioneer from liability therefore. Neither the Auctioneer nor his principal shall be liable by reason of any defect in or condition of the premises on which the sale is held. ADDITION TO OR WITHDRAWAL FROM SALE: The auctioneer reserves the right to withdraw from sale any of the property listed or to sell at this sale property not listed, and also reserves the right to group one or more lots into one or more selling lots or to subdivide into two or more selling lots. Whenever the best interest of the seller will be served, the auctioneer reserves the right to sell all the property listed, in bulk. SALE BY ESTIMATED WEIGHT, COUNT OR MEASURE: Where items are sold by estimated weight, count or measure, the purchaser will be billed for and required to pay for the estimated weight, count or measure. If upon delivery, any shortage exists, the purchaser will receive a refund at the rate of purchase. If there be an excess, the purchaser will be required to take and pay for such excess, at the rate of purchase. DISPUTE BETWEEN BIDDERS: If any dispute arises between two or more bidders, the auctioneer may decide the same or put the lot up for sale again at once, and resell to the highest bidder. The auctioneer’s decision shall be final and absolute. RESERVE: The auctioneer reserves the right to reject any and all bids. On lots upon which there is a reserve, the auctioneer shall have the right to bid on behalf of the Seller. RECORDS: The record of sale kept by the auctioneer and bookkeeper will be taken as final in the event of any dispute. AGENCY: The auctioneer is acting as agent only and is not responsible for the acts of its principals. SALES TAX: Purchaser shall also pay all applicable sales or use taxes imposed by all taxing authorities on such transaction unless purchaser shall present a resale certificate, certificate of exemption or the like, exempting the purchaser and auctioneer from the payment of any such sales and use taxes. BANKRUPTCY: If at any time prior to payment in full, purchaser files a petition in bankruptcy or for other similar protection from creditors, or an involuntary petition in bankruptcy or other similar proceeding is filed against the purchaser, then, at the option of the auctioneer, the sale may be voided. ADDITIONAL TERMS AND CONDITIONS: The auctioneer may add other terms and conditions of sale, such additional terms and conditions to be announced prior to the auction.
Listing Details

ELECTRO-SERVO CNC TURRET PUNCH PRESS
2005 Amada EMK3610, 33 Ton, 60” x 100” Servo Electric Turret Punch, 60” x 98.4” travel, .187” max. sheet thickness, Fanuc AMNC PC Based CNC Control, 58 station, (4) auto index, brush table, serial no: 36102031

PUNCH / LASER CNC TURRET PUNCH PRESS
2001 Amada Apelio III 2510-V 22 Ton Turret Punch/2 KW Laser Combination, Fanuc AF2000C laser, Fanuc FS-160iL, 59.8” x 98.4” travel, .250” max. punching, .375” max. laser, 31 station, (3) auto index, chiller, dust collector, 24K hour blower and vacuum pump done at 23,495 hours, current hours on laser 33,980,  serial no: 3251005

CNC TURRET PUNCH PRESS
Amada Pega 244 22 Ton Turret Punch, Fanuc 6M CNC, 40’ X 40’ travel, 24 station thick turret, ball table, serial number: AP440042, mfg. date: 1987

DIE GRINDER
Amada TEG-160E Die grinder

LASER
Amada LC1212A2 Pulsar 1.5 KW Hybrid Laser, 49.2”” x 49.2” travel, .375” mild steel, .187” stainless steel, Fanuc 16L CNC control, Fanuc C1500B resonator, chiller, dust collector, serial number: 11212731, mfg. date: 1998

CNC PRESS BRAKES
2001 Amada FBD-1030 NT 110 Ton x 10’ 7-Axis CNC Press Brake, 118” overall bending length, 106” between housings, 5.9” stroke, 16.5” open height, 15.75” throat depth, 5-axis back gauge, Amada AMNC PC Control, bed crowing control, electric foot switch and full length treadle control,  serial number: 10300112

1999 Amada HFE8025S 88 Ton x 8’ 8-Axis CNC Press Brake, 101” overall bed length, 103” between housings, 7.9”” stroke, 18.5” open height, 16.5” throat depth, 5-axis back gauge, cnc crowning, Amada Operateur CNC control serial number: V991209

1999 Amada RG5020 LD 55 Ton x 6’ CNC Press Brake, 82” overall bending length, 59.8” between housings, 3.9” stroke, 14.6” open height, 15.75” throat depth, Amada LD 2-axis cnc control, serial number: 50200064

Amada RG125 138 Ton x 10’ CNC Press Brake, 122” overall bending length, 100.5” distance between housings, 3.9” stroke, 14.85” open height, 15.76” stroke, Amada NC9EX 3-axis cnc control, serial number: 01250679

Guifil PE-6-16, 17.5 Ton, up-acting press brake, 24″ overall bed length, 22’ between housings, 3.937″ stroke, 12” open height, Essay CNC 402 2-axis control, programmable ram and back gauge control, S/N: 423-0608

Large Quantity of Amada Punch and Press Brake Tooling

MECHANICAL SQUARING SHEAR
Amada M-3045 10’ x 3/16” Mechanical Shear, 39” programmable back gauge, 60 strokes per minute, rear sheet supports, 120” squaring arm, (2) 36” front sheet supports, electric foot switch control, serial number: 30450671

CNC FOLDING BRAKE
Roper Whitney AB1014KC 10’ x 14 Gauge Kombi CNC Folder W/New CNC Control in 2018, L-Shaped Back Gauge, Rotating Kombi Bending Beam, S/N: 591-6-99, New 1999

INSERTION PRESSES
Haeger 618 hardware insertion press, 6 ton, 18” throat, 0 – 8” adjustable stroke, 2 hp hydraulic motor, electric foot switch, modular bowl feeder, misc. tooling, serial number: 06L-00734, mfg. date: 1999

Pemserter series 4 hardware Insertion Press, 6 ton, 18” throat, adjustable stroke, serial number: K4-4566.

FORKLIFTS
Yale 5800# Capacity

Hyster 4500# Capacity

Toyota 3300# Capacity electric

Toyota 4500# Capacity electric pallet truck

Skyjack SJIII Scissor Lift

2007 Chevy C4500 13′ Box truck with power tailgate

WELDERS
Lincoln TIG 275 & 225 Tig Welders

Lors 40-KVA Spot Welder

Alphil 40-KVA Spot Welder

AIR COMPRESSORS
50-HP Quincy Screw-Type

20-HP Scales Reciprocating Type

MISCELLANEOUS EQUIPMENT & TOOLROOM
Lubow HPB-6 Bender

Enco Vari-Speed Vertical Mill

16″ DoAll Vertical Bandsaw

Reid 6″ x 18″ Hydraulic Feed Surface Grinder

Drill Presses

ALSO
Large Quantity Pallet Racking, Heavy Duty Canterliver Style Racking,

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Precision Amada Fabrication Facility
 Online Only Auction
Auction Date(s)
Bidding Starts: Tuesday Jan 29 , 9:00 AM
Bidding Ends: Thursday Feb 7 , 2:00 PM
Auction Location

Maspeth, NY 11378
Company
Koster Industries Inc.

Website: kosterindustries.com

Listing Terms and Conditions
NOTICE: All Bidders and other persons attending this sale agree that they have read and had full knowledge of these terms and agree to be bound thereby. Posted Payment Due Date: 24 Hours from receipt of invoice Posted Last Day of Removal: BUYER INFORMATION: Each potential Buyer represents, warrants and certifies that it has provided (i) its full and accurate legal name and business address, and the full and accurate legal name and address of Buyer’s representative(s) attending and/or participating in the sale event of the Property, and (ii) the citizenship status of Buyer and its representative(s) and any foreign interest of Buyer or its representative(s) OUT OF COUNTRY RESIDENTS WILL NOT BE APPROVED TO BID WITHOUT A REFUNDABLE DEPOSIT PRIOR. PAYMENTS: All payments must be made in the form of Cash, Company Check – up to $1,000, Certified Funds over $1,000, Money Order, and Credit Cards with a 3% Processing charge. Koster Industries Inc. reserves the right to charge any buyers credit card for purchases made at the sale including all fees associated with if there is no communication between buyer and Koster Industries Inc. We will make multiple attempts to contact buyer then have the right to charge credit card associated with the account. Manner of payment is to be made out to Koster Industries Inc. Payments are due upon posted time of payment, any payments over the period of one week with no communication between buyer and auctioneer could be considered abandoned and Koster Industries Inc. Will reserve the right to re-sell any and all lots purchased. BUYER BEWARE: “THE BUYER ALONE IS RESPONSIBLE FOR CHECKING THE QUALITY AND SUITABILITY OF GOODS BEFORE A PURCHASE IS MADE”. Koster Industries Inc. makes no representations, warranties, promises, covenants or guarantees, expressed or implied, as to defects in or the completeness or accuracy of the description in any advertising of any item(s) being auctioned and is not responsible for any advertising discrepancies, descriptions, nomenclature or inaccuracies of any kind. ALL ITEMS ARE SOLD ON “AS IS, WHERE IS” BASIS AND WITH ALL FAULTS WITHOUT EXCEPTION AND WITH REMOVAL AT BUYERS SOLE RISK AND EXPENSE. THE AUCTIONEER MAKES NO REPRESENTATIONS, WARRANTIES, PROMISES, COVENANTS OR GUARANTEES OF ANY KIND, EXPRESSED OR IMPLIED, AS TO THE NATURE, QUALITY, DURABILITY, CAPABILITY, FUNCTION, PERFORMANCE, VALUE OR CONDITION OF THE ITEM(S) BEING AUCTIONED OR ITS (THEIR) SUITABILITY FOR ANY USE. THE AUCTIONEER EXPRESSLY AND SPECIFICALLY DISCLAIM, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. REMOVAL: All purchases must be removed not later than Posted Removal Time. No lot can, on any account, be removed during the sale. Removal shall be at the expense, risk, and liability of the purchaser. Purchases will be delivered only on presentation of paid bill. The Auctioneer shall not be responsible for goods not removed within the time allowed, but shall have the option to remove and store at the expense and risk of the purchaser any article purchased, but not paid for and removal of any of the goods. A storage charge of $750.00 USD will be applied to anyone who does not remove within the posted time limit without prior permission from our office. for insurance reasons Koster Industries Inc. does not supply any material handling devises or equipment including but not limited to forklift trucks, cranes, pallet jacks, hand trucks, Etc. We require valid insurance from all people who work inside the facility including all machinery movers, erectors, millwrights, or any buyer operating equipment or dismantling/moving machinery – NO EXEMPTIONS. Koster Industries Inc. does not pack, ship crate, transport or rig any items, we provide riggers/pack & ship companies information on our website as a courtesy, they are 3rd party contractors, Koster Industries is not responsible for rigging charges, damages, Etc. We must be supplied with an insurance certificate naming Koster Industries Inc. as additionally insured for all machinery movers or anyone operating equipment within the building – NO EXCEPTIONS RESPONSIBILITY FOR NON-DELIVERY: The Auctioneer shall not, in any event, be liable for non-delivery or for any other matter or thing, to any purchaser of any lot, other than for the return to the purchaser of the deposit or sum paid on said lot, should the purchaser be entitled thereto. CLAIMS: No claims will be allowed after removal of goods from premises. Koster is not responsible for any damage incurred by contractors or riggers, no rigger / customer can lay any claim to Koster for any and all damages SAFETY DEVICES: Articles purchased may not incorporate approved activating mechanisms, operating safety devices or safety guards, as required by OSHA or otherwise. It is purchaser’s responsibility that articles purchased be so equipped and safeguarded to meet OSHA and any other requirements before placing such articles into operation. INDEMNIFICATION: Purchaser agrees to indemnify and hold the Auctioneer harmless from and against all claims and liabilities relating to the condition or use of the articles purchased or failure of user to follow instructions, warnings or recommendations of the manufacturer, or to comply with federal, state and local laws applicable to such articles, including OSHA requirements, or for proximate or consequential damages, costs or legal expenses arising therefrom. COMPLIANCE WITH LAWS: Buyer shall comply with all U.S. export control laws and regulations. The Property sold under the Transaction Documents may be subject to the provisions of Export Administration Act of 1979 and the Export Administration Regulations promulgated thereunder, the Arms Export Control Act and the International Traffic in Arms Regulations, and the sanctions laws administered by the Office of Foreign Assets Control. Buyer acknowledges that these statues and regulations impose restrictions on import, export and transfer to third countries of commodities and related data, and that licenses from the U.S. Department of Commerce or U.S. Department of State may be required before such commodities or data can be transferred, and that such licenses may impose further restrictions on use and further transfer of such commodities and data. Buyer agrees (i) to notify Seller prior to any transfer of Property (including goods, commodities or data) purchased under the Transaction Documents to any parties outside of the United States, (ii) to provide an end-use certificate and a certification that the Property (including goods, commodities, and data) purchased under the Transaction Documents will not be transferred to any end-user or for any end-use that is prohibited by U. S. law, (iii) to provide proof of any required U. S. Automated Export System (AES) filing prior to export of any Property (including goods, commodities or data) purchased under the Transaction Documents, and (iv) that Seller reserves the right to cancel any sale at any time in the event it determines, in its sole discretion, that any transaction arising out of the Transaction Documents does or may violate applicable U.S. export control or similar laws. COMPLIANCE WITH TERMS OF SALE: In default of payment of bills in full within the time therein specified, the auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. Lots not paid for and removed within the time allowed herein may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charges of re-sale, will be charged to the defaulting purchaser. The execution, interpretation, and performance of the Transaction Documents shall be governed by, and construed in accordance with, the laws of the State of New York (without regard to its conflicts of law provisions). THE PARTIES HEREBY WAIVE THE RIGHT TO A JURY TRIAL IN ANY DISPUTE OF ANY CLAIM OR CAUSE OF ACTION BASED UPON OR ARISING OUT OF, DIRECTLY OR INDIRECTLY, THE TRANSACTION DOCUMENTS, ANY OF THE RELATED DOCUMENTS, ANY DEALINGS BETWEEN SELLER AND BUYER RELATING TO THE SUBJECT MATTER HEREOF OR THEREOF, AND/OR THE RELATIONSHIP THAT IS BEING ESTABLISHED BETWEEN SELLER AND BUYER. RISK TO PERSON AND PROPERTY: Persons attending during exhibition, sale or removal of goods assume all risks of damage of or loss to person and property and specifically release the auctioneer from liability therefore. Neither the Auctioneer nor his principal shall be liable by reason of any defect in or condition of the premises on which the sale is held. ADDITION TO OR WITHDRAWAL FROM SALE: The auctioneer reserves the right to withdraw from sale any of the property listed or to sell at this sale property not listed, and also reserves the right to group one or more lots into one or more selling lots or to subdivide into two or more selling lots. Whenever the best interest of the seller will be served, the auctioneer reserves the right to sell all the property listed, in bulk. SALE BY ESTIMATED WEIGHT, COUNT OR MEASURE: Where items are sold by estimated weight, count or measure, the purchaser will be billed for and required to pay for the estimated weight, count or measure. If upon delivery, any shortage exists, the purchaser will receive a refund at the rate of purchase. If there be an excess, the purchaser will be required to take and pay for such excess, at the rate of purchase. DISPUTE BETWEEN BIDDERS: If any dispute arises between two or more bidders, the auctioneer may decide the same or put the lot up for sale again at once, and resell to the highest bidder. The auctioneer’s decision shall be final and absolute. RESERVE: The auctioneer reserves the right to reject any and all bids. On lots upon which there is a reserve, the auctioneer shall have the right to bid on behalf of the Seller. RECORDS: The record of sale kept by the auctioneer and bookkeeper will be taken as final in the event of any dispute. AGENCY: The auctioneer is acting as agent only and is not responsible for the acts of its principals. SALES TAX: Purchaser shall also pay all applicable sales or use taxes imposed by all taxing authorities on such transaction unless purchaser shall present a resale certificate, certificate of exemption or the like, exempting the purchaser and auctioneer from the payment of any such sales and use taxes. BANKRUPTCY: If at any time prior to payment in full, purchaser files a petition in bankruptcy or for other similar protection from creditors, or an involuntary petition in bankruptcy or other similar proceeding is filed against the purchaser, then, at the option of the auctioneer, the sale may be voided. ADDITIONAL TERMS AND CONDITIONS: The auctioneer may add other terms and conditions of sale, such additional terms and conditions to be announced prior to the auction.
File Attachments

ELECTRO-SERVO CNC TURRET PUNCH PRESS
2005 Amada EMK3610, 33 Ton, 60” x 100” Servo Electric Turret Punch, 60” x 98.4” travel, .187” max. sheet thickness, Fanuc AMNC PC Based CNC Control, 58 station, (4) auto index, brush table, serial no: 36102031

PUNCH / LASER CNC TURRET PUNCH PRESS
2001 Amada Apelio III 2510-V 22 Ton Turret Punch/2 KW Laser Combination, Fanuc AF2000C laser, Fanuc FS-160iL, 59.8” x 98.4” travel, .250” max. punching, .375” max. laser, 31 station, (3) auto index, chiller, dust collector, 24K hour blower and vacuum pump done at 23,495 hours, current hours on laser 33,980,  serial no: 3251005

CNC TURRET PUNCH PRESS
Amada Pega 244 22 Ton Turret Punch, Fanuc 6M CNC, 40’ X 40’ travel, 24 station thick turret, ball table, serial number: AP440042, mfg. date: 1987

DIE GRINDER
Amada TEG-160E Die grinder

LASER
Amada LC1212A2 Pulsar 1.5 KW Hybrid Laser, 49.2”” x 49.2” travel, .375” mild steel, .187” stainless steel, Fanuc 16L CNC control, Fanuc C1500B resonator, chiller, dust collector, serial number: 11212731, mfg. date: 1998

CNC PRESS BRAKES
2001 Amada FBD-1030 NT 110 Ton x 10’ 7-Axis CNC Press Brake, 118” overall bending length, 106” between housings, 5.9” stroke, 16.5” open height, 15.75” throat depth, 5-axis back gauge, Amada AMNC PC Control, bed crowing control, electric foot switch and full length treadle control,  serial number: 10300112

1999 Amada HFE8025S 88 Ton x 8’ 8-Axis CNC Press Brake, 101” overall bed length, 103” between housings, 7.9”” stroke, 18.5” open height, 16.5” throat depth, 5-axis back gauge, cnc crowning, Amada Operateur CNC control serial number: V991209

1999 Amada RG5020 LD 55 Ton x 6’ CNC Press Brake, 82” overall bending length, 59.8” between housings, 3.9” stroke, 14.6” open height, 15.75” throat depth, Amada LD 2-axis cnc control, serial number: 50200064

Amada RG125 138 Ton x 10’ CNC Press Brake, 122” overall bending length, 100.5” distance between housings, 3.9” stroke, 14.85” open height, 15.76” stroke, Amada NC9EX 3-axis cnc control, serial number: 01250679

Guifil PE-6-16, 17.5 Ton, up-acting press brake, 24″ overall bed length, 22’ between housings, 3.937″ stroke, 12” open height, Essay CNC 402 2-axis control, programmable ram and back gauge control, S/N: 423-0608

Large Quantity of Amada Punch and Press Brake Tooling

MECHANICAL SQUARING SHEAR
Amada M-3045 10’ x 3/16” Mechanical Shear, 39” programmable back gauge, 60 strokes per minute, rear sheet supports, 120” squaring arm, (2) 36” front sheet supports, electric foot switch control, serial number: 30450671

CNC FOLDING BRAKE
Roper Whitney AB1014KC 10’ x 14 Gauge Kombi CNC Folder W/New CNC Control in 2018, L-Shaped Back Gauge, Rotating Kombi Bending Beam, S/N: 591-6-99, New 1999

INSERTION PRESSES
Haeger 618 hardware insertion press, 6 ton, 18” throat, 0 – 8” adjustable stroke, 2 hp hydraulic motor, electric foot switch, modular bowl feeder, misc. tooling, serial number: 06L-00734, mfg. date: 1999

Pemserter series 4 hardware Insertion Press, 6 ton, 18” throat, adjustable stroke, serial number: K4-4566.

FORKLIFTS
Yale 5800# Capacity

Hyster 4500# Capacity

Toyota 3300# Capacity electric

Toyota 4500# Capacity electric pallet truck

Skyjack SJIII Scissor Lift

2007 Chevy C4500 13′ Box truck with power tailgate

WELDERS
Lincoln TIG 275 & 225 Tig Welders

Lors 40-KVA Spot Welder

Alphil 40-KVA Spot Welder

AIR COMPRESSORS
50-HP Quincy Screw-Type

20-HP Scales Reciprocating Type

MISCELLANEOUS EQUIPMENT & TOOLROOM
Lubow HPB-6 Bender

Enco Vari-Speed Vertical Mill

16″ DoAll Vertical Bandsaw

Reid 6″ x 18″ Hydraulic Feed Surface Grinder

Drill Presses

ALSO
Large Quantity Pallet Racking, Heavy Duty Canterliver Style Racking,