Former Assets of Butler Machine
Previous Page Listing ID#: 233956

Auction Location

Bellefonte, PA 16823
Auction Dates and TimesSALE IS COMPLETED
Tuesday Oct 13, 2020 Completed
Auction Type
 Live Auction with Online Bidding  VIEW ONLINE CATALOG
Company Information
Hartland Auctioneers

Contact: Dean A. Gearhart GPPA
Phone: (724) 368-9788
Email: info@hartlandmachinery.com
Website: www.hartlandauctions.com

GoToAuction.com ID#: 6269
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
No Merchandise may be removed until complete settlement has been made. 1.All purchases shall be paid for in full on the day of the sale, unless a wire transfer is required. The wire transfer shall be sent no later than the next business day by 3:00 PM. 2.Purchases shall be paid for with cash, WV, PA or Ohio co. checks, credit card or wire transfer. Any other state checks will require bank letter of credit. Invoices up to $10,000.00 may be paid for with a company check. Invoices above $10,000.00 shall be paid for with a wire transfer. 3.All items are sold as is where is and how is, with no warranties of any type expressed or implied concerning the merchandise being sold. Once an item is called Sold, it becomes the sole responsibility of the buyer. 4.Descriptions of merchandise contained in the catalog are intended for general information purposes only. Please examine items carefully before bidding as no refunds will be given. 5.A Buyer’s Premium of 15% applies to all lots sold in-house, 18% online. 3% surcharge for credit cards 6.$5 minimum bid. 7.No one under the age of 18 years of age is permitted to register or bid. 8.A properly stamped invoice, authenticated by our cashier, will be required by our check-out personnel in order that you may remove the items. Any discrepancies must be brought to our attention prior to removal from the property. 9.The auctioneers may remove items from the sale at their discretion. 10.The auctioneer is the sole authority on any disputed bid, and his word is final. We reserve the right to correct any clerical errors and to re-invoice if necessary. If a dispute arises out of this contract that cannot be settled through negotiation or mediation, any-and-all court proceeding shall take place in Butler, Pa.16101. 11.All machines are either disconnected at the plug or at the quick disconnect box, box not included. 12.Removal dates and times: After the end of the auction until 5:00 pm. Weekdays from 9 am to 4 pm, for dates to be announced by auctioneer. All other dates by appointment only. Call auctioneer to schedule. Items not picked up will be considered abandoned, unless prior arrangements have been made with the auctioneer. Storage fees will apply for items picked up after three weeks. Call or see auctioneer for details. Additional $150 per day fee for checkout on the day you pick up. 13.NSF or stop payment checks are subject to a $35.00 returned check fee
File Attachments
Flyer Catalog
Listing Information

Preview: Tuesday, Oct.12, 9 am to 3 pm

Online bidding through Bidspotter.com 

CNC

Cincinnati Milacron Cintimatic 15VC-1500-4 Vertical Machining Center, SN 9511b0198-0105, with Acramatic 850 controls, 30 ATC, Cat 50 taper, 25-7/8” X 63-3/4” table

Cincinnati Milacron Sabre 750 Vertical Machining Center, model EAA, SN 7029-a01-90-1118, with Acramatic 850 controls, 21 ATC, Cat 40 taper, 17-1/8”x 34” table, with available 4th axis

CNC TURNING CENTER

Cincinnati Milacron Cinturn series 2220U-80, Model AM, SN 5321u20-89-002 , with Acramatic 850 controls, 12 position turret, 19.5” 3-jaw chuck, 5.5” spindle bore, 80” between centers, Jorgensen chip conveyor, programmable tailstock

Cincinnati Milacron Cinturn 8U-40, series 1208, Model AT, SN 5320U08-84-025, with Acramatic 850 controls, 6 position turret, 8” 3-jaw chuck, 2” spindle bore, 40” between centers, Jorgensen chip conveyor

 

Lathes

LeBlond 49”x540” lathe, SN NQ-10A-63-S, 1.5-165 RPM spindle speed, equipped with 3 steady rests- 18”, 20”, 24”, 3-1/8” spindle hole, 44-1/2” -jaw chuck,

Monarch 20” X72” lathe, actual swing 22.5”, SN 35537, with Aloris style quick change tool post, 6” steady rest, 17-700 RPM spindle, 1-1/2” spindle bore, with coolant,

TOS Trencin 28”x120” lathe,  type SN 71 B, SN 071300790611, 10-1000 RPM spindle speed, 16” swing over cross slide, equipped with 3” spindle bore, 24-5” 4-jaw chuck, ,  with 3 steady rests – 7”, 13”, 13”, with coolant

Rotary grinder

Mattison  Model 24-42, SN 24 646, with 42” x 9/16” electromagnetic chuck, Chucktron controls, 12” under wheel, with manual wheel dresser, 0-32 RPM table, 22” segmented grinding wheel model MM-22, 6” high, 10 segments, 100 HP main drive motor

Horz boring mill

Cincinnati Gilbert 5” CNC table type horizontal boring mill, SN 5D69, 48”x86-3/4” table, Travels- X-84”, Vert -72”, Z-60”, est 48”spindle travel, hardened ways,  telescoping way covers, GE Fanuc 15-M control, full pendant control, 50 taper, w-38.9, 2 outrigger supports

All angle head available

G&L table type, 108-y, 156 table travel, 72”x170” table, z-48, CNC control, 4 outrigger supports, 6” 50 taper

42” G&L right angle head available

Plasma burning table

Koike Aronson burning table, with plasma & oxy torches, model VG3500DH, SN VG98190, mfg 98, capacity 967 DNCH, 116” wide by 268” long inside table, with Hypertherm HT4001 plasma cutter, and Hypertherm 301AC-A/039098 chiller, Northrop Grumman controls, pendant control

Welders

Lincoln Idealarc CV-400, SN U1930215775, Code 9405M, with LN-7 wire feed, 100% duty cycle

Lincoln Idealarc CV-400, SN U1040706600, Code 10084M, with LN-7 wire feed, 100% duty cycle

Miller 330 A/BP arc welder, SN JB549602, 60% duty cycle, on roller cart

Saws

Marvel 916M horizontal band saw, 9”x16” capacity

Powermatic vert band saw, Model 87, SN 65-6089, 24”x24” table, 12” under guide, 19” throat, with blade welder

Vertical mill

Fryer MB-15, SN 905 0909547, 15-1/2”x 67” table, 30 taper, Anilam 1100M controls, travels – X-50, Y-22, 24” under spindle

Rotary tables

60x84”x16” 1 deg indexing air lift table

48”x60”X12-1/4” Lucas, SN 48BP0460, air operated

Troyke 21” manual

24” manual

Forklifts

Clark C500Y 155BK, diesel, SN Y1015-70-7011CB, 15,500 cap, dual front wheel, solid tire, 137” lift

Clark C500-55, SN 355-1830-2572.174, solid tire, LP, 104” lift, for parts

Also

Oliver drill grinder model 600, SN G-6300, 3-1/2” capacity

State 20” disc sander, model D20, SN H2399, 2 HP motor

Yoshida radial arm drill press, Model YR5-115, SN 5882010, power lock on arm, 36” travel, 13” column, 25-1/2”x19-1/2” right angle box table, 40-1800 rpm spindle, drilling & tapping capacity

Lift-rite pallet jack

5/8” 16 speed drill press

Trent oven, SN 880-96210 KW, 240V, single phase, 2300 deg. F max temp, 12.5”x10” opening, 28.5” deep

S/N & Natl sandblasting pot, 120 psi

Clausing drill press model 2276, SN 516458, 22-1/4”x19-1/2” table, variable speed 150-2000 RPM

US Electrical pedestal grinder, 220v, 1800 RPM

Lista 12 drawer cabinets, 5’ & 42”, 42” 10 & 9 drawer, 2 Lista cabinets

Zep parts washer

Angle plates-matched set 23-3/4”w X 99-5/8” h X 39-3/4” base, matched set cast iron t-slotted – 35-1/4”w x 23-1/4”h x 19-1/4 d, 24-1/4x 35-3/4x23-7/8 slotted, 23-3/4x36-1/2x27-1/2 cast iron t-slotted with steel plates on front

Rahn 24”X36” ledged granite surface plate

New carbide inserts from Greenleaf, Kennametal etc

Portapowers

Mill vises

Power & hand tools

Tons of tooling – 50 taper, CAT 50 taper, Cat 40 taper

Machine set up jacks up to 50”

Tool racks, tool carts

Lifting chains & straps

Stock racks & stock, tube, round, hex, rectangle,

60”x96”x4-1/4” steel layout table

48”x96”x7/8” odd shaped steel layout table

50-3/4”x96-1/4”x3/8” steel layout table

Dump hoppers


Auction License: AU-002918-L
Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Sponsored Links

Former Assets of Butler Machine

Hartland Auctioneers

Hartland Auctioneers


Contact: Dean A. Gearhart GPPA
Phone: (724) 368-9788
Sale Location
234 S. Potter St
Bellefonte, PA 16823
Sale Dates and Times
Tuesday Oct 13, 2020 Completed
Sale Terms and Conditions
No Merchandise may be removed until complete settlement has been made. 1.All purchases shall be paid for in full on the day of the sale, unless a wire transfer is required. The wire transfer shall be sent no later than the next business day by 3:00 PM. 2.Purchases shall be paid for with cash, WV, PA or Ohio co. checks, credit card or wire transfer. Any other state checks will require bank letter of credit. Invoices up to $10,000.00 may be paid for with a company check. Invoices above $10,000.00 shall be paid for with a wire transfer. 3.All items are sold as is where is and how is, with no warranties of any type expressed or implied concerning the merchandise being sold. Once an item is called Sold, it becomes the sole responsibility of the buyer. 4.Descriptions of merchandise contained in the catalog are intended for general information purposes only. Please examine items carefully before bidding as no refunds will be given. 5.A Buyer’s Premium of 15% applies to all lots sold in-house, 18% online. 3% surcharge for credit cards 6.$5 minimum bid. 7.No one under the age of 18 years of age is permitted to register or bid. 8.A properly stamped invoice, authenticated by our cashier, will be required by our check-out personnel in order that you may remove the items. Any discrepancies must be brought to our attention prior to removal from the property. 9.The auctioneers may remove items from the sale at their discretion. 10.The auctioneer is the sole authority on any disputed bid, and his word is final. We reserve the right to correct any clerical errors and to re-invoice if necessary. If a dispute arises out of this contract that cannot be settled through negotiation or mediation, any-and-all court proceeding shall take place in Butler, Pa.16101. 11.All machines are either disconnected at the plug or at the quick disconnect box, box not included. 12.Removal dates and times: After the end of the auction until 5:00 pm. Weekdays from 9 am to 4 pm, for dates to be announced by auctioneer. All other dates by appointment only. Call auctioneer to schedule. Items not picked up will be considered abandoned, unless prior arrangements have been made with the auctioneer. Storage fees will apply for items picked up after three weeks. Call or see auctioneer for details. Additional $150 per day fee for checkout on the day you pick up. 13.NSF or stop payment checks are subject to a $35.00 returned check fee
Listing Details

Preview: Tuesday, Oct.12, 9 am to 3 pm

Online bidding through Bidspotter.com 

CNC

Cincinnati Milacron Cintimatic 15VC-1500-4 Vertical Machining Center, SN 9511b0198-0105, with Acramatic 850 controls, 30 ATC, Cat 50 taper, 25-7/8” X 63-3/4” table

Cincinnati Milacron Sabre 750 Vertical Machining Center, model EAA, SN 7029-a01-90-1118, with Acramatic 850 controls, 21 ATC, Cat 40 taper, 17-1/8”x 34” table, with available 4th axis

CNC TURNING CENTER

Cincinnati Milacron Cinturn series 2220U-80, Model AM, SN 5321u20-89-002 , with Acramatic 850 controls, 12 position turret, 19.5” 3-jaw chuck, 5.5” spindle bore, 80” between centers, Jorgensen chip conveyor, programmable tailstock

Cincinnati Milacron Cinturn 8U-40, series 1208, Model AT, SN 5320U08-84-025, with Acramatic 850 controls, 6 position turret, 8” 3-jaw chuck, 2” spindle bore, 40” between centers, Jorgensen chip conveyor

 

Lathes

LeBlond 49”x540” lathe, SN NQ-10A-63-S, 1.5-165 RPM spindle speed, equipped with 3 steady rests- 18”, 20”, 24”, 3-1/8” spindle hole, 44-1/2” -jaw chuck,

Monarch 20” X72” lathe, actual swing 22.5”, SN 35537, with Aloris style quick change tool post, 6” steady rest, 17-700 RPM spindle, 1-1/2” spindle bore, with coolant,

TOS Trencin 28”x120” lathe,  type SN 71 B, SN 071300790611, 10-1000 RPM spindle speed, 16” swing over cross slide, equipped with 3” spindle bore, 24-5” 4-jaw chuck, ,  with 3 steady rests – 7”, 13”, 13”, with coolant

Rotary grinder

Mattison  Model 24-42, SN 24 646, with 42” x 9/16” electromagnetic chuck, Chucktron controls, 12” under wheel, with manual wheel dresser, 0-32 RPM table, 22” segmented grinding wheel model MM-22, 6” high, 10 segments, 100 HP main drive motor

Horz boring mill

Cincinnati Gilbert 5” CNC table type horizontal boring mill, SN 5D69, 48”x86-3/4” table, Travels- X-84”, Vert -72”, Z-60”, est 48”spindle travel, hardened ways,  telescoping way covers, GE Fanuc 15-M control, full pendant control, 50 taper, w-38.9, 2 outrigger supports

All angle head available

G&L table type, 108-y, 156 table travel, 72”x170” table, z-48, CNC control, 4 outrigger supports, 6” 50 taper

42” G&L right angle head available

Plasma burning table

Koike Aronson burning table, with plasma & oxy torches, model VG3500DH, SN VG98190, mfg 98, capacity 967 DNCH, 116” wide by 268” long inside table, with Hypertherm HT4001 plasma cutter, and Hypertherm 301AC-A/039098 chiller, Northrop Grumman controls, pendant control

Welders

Lincoln Idealarc CV-400, SN U1930215775, Code 9405M, with LN-7 wire feed, 100% duty cycle

Lincoln Idealarc CV-400, SN U1040706600, Code 10084M, with LN-7 wire feed, 100% duty cycle

Miller 330 A/BP arc welder, SN JB549602, 60% duty cycle, on roller cart

Saws

Marvel 916M horizontal band saw, 9”x16” capacity

Powermatic vert band saw, Model 87, SN 65-6089, 24”x24” table, 12” under guide, 19” throat, with blade welder

Vertical mill

Fryer MB-15, SN 905 0909547, 15-1/2”x 67” table, 30 taper, Anilam 1100M controls, travels – X-50, Y-22, 24” under spindle

Rotary tables

60x84”x16” 1 deg indexing air lift table

48”x60”X12-1/4” Lucas, SN 48BP0460, air operated

Troyke 21” manual

24” manual

Forklifts

Clark C500Y 155BK, diesel, SN Y1015-70-7011CB, 15,500 cap, dual front wheel, solid tire, 137” lift

Clark C500-55, SN 355-1830-2572.174, solid tire, LP, 104” lift, for parts

Also

Oliver drill grinder model 600, SN G-6300, 3-1/2” capacity

State 20” disc sander, model D20, SN H2399, 2 HP motor

Yoshida radial arm drill press, Model YR5-115, SN 5882010, power lock on arm, 36” travel, 13” column, 25-1/2”x19-1/2” right angle box table, 40-1800 rpm spindle, drilling & tapping capacity

Lift-rite pallet jack

5/8” 16 speed drill press

Trent oven, SN 880-96210 KW, 240V, single phase, 2300 deg. F max temp, 12.5”x10” opening, 28.5” deep

S/N & Natl sandblasting pot, 120 psi

Clausing drill press model 2276, SN 516458, 22-1/4”x19-1/2” table, variable speed 150-2000 RPM

US Electrical pedestal grinder, 220v, 1800 RPM

Lista 12 drawer cabinets, 5’ & 42”, 42” 10 & 9 drawer, 2 Lista cabinets

Zep parts washer

Angle plates-matched set 23-3/4”w X 99-5/8” h X 39-3/4” base, matched set cast iron t-slotted – 35-1/4”w x 23-1/4”h x 19-1/4 d, 24-1/4x 35-3/4x23-7/8 slotted, 23-3/4x36-1/2x27-1/2 cast iron t-slotted with steel plates on front

Rahn 24”X36” ledged granite surface plate

New carbide inserts from Greenleaf, Kennametal etc

Portapowers

Mill vises

Power & hand tools

Tons of tooling – 50 taper, CAT 50 taper, Cat 40 taper

Machine set up jacks up to 50”

Tool racks, tool carts

Lifting chains & straps

Stock racks & stock, tube, round, hex, rectangle,

60”x96”x4-1/4” steel layout table

48”x96”x7/8” odd shaped steel layout table

50-3/4”x96-1/4”x3/8” steel layout table

Dump hoppers

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Former Assets of Butler Machine
 Live Auction w/Online Bidding
Auction Date(s)
Tuesday Oct 13, 2020 Completed
Auction Location

Bellefonte, PA 16823
Company
Hartland Auctioneers

Contact: Dean A. Gearhart GPPA
Phone: (724) 368-9788
Website: www.hartlandauctions.com

Listing Terms and Conditions
No Merchandise may be removed until complete settlement has been made. 1.All purchases shall be paid for in full on the day of the sale, unless a wire transfer is required. The wire transfer shall be sent no later than the next business day by 3:00 PM. 2.Purchases shall be paid for with cash, WV, PA or Ohio co. checks, credit card or wire transfer. Any other state checks will require bank letter of credit. Invoices up to $10,000.00 may be paid for with a company check. Invoices above $10,000.00 shall be paid for with a wire transfer. 3.All items are sold as is where is and how is, with no warranties of any type expressed or implied concerning the merchandise being sold. Once an item is called Sold, it becomes the sole responsibility of the buyer. 4.Descriptions of merchandise contained in the catalog are intended for general information purposes only. Please examine items carefully before bidding as no refunds will be given. 5.A Buyer’s Premium of 15% applies to all lots sold in-house, 18% online. 3% surcharge for credit cards 6.$5 minimum bid. 7.No one under the age of 18 years of age is permitted to register or bid. 8.A properly stamped invoice, authenticated by our cashier, will be required by our check-out personnel in order that you may remove the items. Any discrepancies must be brought to our attention prior to removal from the property. 9.The auctioneers may remove items from the sale at their discretion. 10.The auctioneer is the sole authority on any disputed bid, and his word is final. We reserve the right to correct any clerical errors and to re-invoice if necessary. If a dispute arises out of this contract that cannot be settled through negotiation or mediation, any-and-all court proceeding shall take place in Butler, Pa.16101. 11.All machines are either disconnected at the plug or at the quick disconnect box, box not included. 12.Removal dates and times: After the end of the auction until 5:00 pm. Weekdays from 9 am to 4 pm, for dates to be announced by auctioneer. All other dates by appointment only. Call auctioneer to schedule. Items not picked up will be considered abandoned, unless prior arrangements have been made with the auctioneer. Storage fees will apply for items picked up after three weeks. Call or see auctioneer for details. Additional $150 per day fee for checkout on the day you pick up. 13.NSF or stop payment checks are subject to a $35.00 returned check fee
File Attachments

Preview: Tuesday, Oct.12, 9 am to 3 pm

Online bidding through Bidspotter.com 

CNC

Cincinnati Milacron Cintimatic 15VC-1500-4 Vertical Machining Center, SN 9511b0198-0105, with Acramatic 850 controls, 30 ATC, Cat 50 taper, 25-7/8” X 63-3/4” table

Cincinnati Milacron Sabre 750 Vertical Machining Center, model EAA, SN 7029-a01-90-1118, with Acramatic 850 controls, 21 ATC, Cat 40 taper, 17-1/8”x 34” table, with available 4th axis

CNC TURNING CENTER

Cincinnati Milacron Cinturn series 2220U-80, Model AM, SN 5321u20-89-002 , with Acramatic 850 controls, 12 position turret, 19.5” 3-jaw chuck, 5.5” spindle bore, 80” between centers, Jorgensen chip conveyor, programmable tailstock

Cincinnati Milacron Cinturn 8U-40, series 1208, Model AT, SN 5320U08-84-025, with Acramatic 850 controls, 6 position turret, 8” 3-jaw chuck, 2” spindle bore, 40” between centers, Jorgensen chip conveyor

 

Lathes

LeBlond 49”x540” lathe, SN NQ-10A-63-S, 1.5-165 RPM spindle speed, equipped with 3 steady rests- 18”, 20”, 24”, 3-1/8” spindle hole, 44-1/2” -jaw chuck,

Monarch 20” X72” lathe, actual swing 22.5”, SN 35537, with Aloris style quick change tool post, 6” steady rest, 17-700 RPM spindle, 1-1/2” spindle bore, with coolant,

TOS Trencin 28”x120” lathe,  type SN 71 B, SN 071300790611, 10-1000 RPM spindle speed, 16” swing over cross slide, equipped with 3” spindle bore, 24-5” 4-jaw chuck, ,  with 3 steady rests – 7”, 13”, 13”, with coolant

Rotary grinder

Mattison  Model 24-42, SN 24 646, with 42” x 9/16” electromagnetic chuck, Chucktron controls, 12” under wheel, with manual wheel dresser, 0-32 RPM table, 22” segmented grinding wheel model MM-22, 6” high, 10 segments, 100 HP main drive motor

Horz boring mill

Cincinnati Gilbert 5” CNC table type horizontal boring mill, SN 5D69, 48”x86-3/4” table, Travels- X-84”, Vert -72”, Z-60”, est 48”spindle travel, hardened ways,  telescoping way covers, GE Fanuc 15-M control, full pendant control, 50 taper, w-38.9, 2 outrigger supports

All angle head available

G&L table type, 108-y, 156 table travel, 72”x170” table, z-48, CNC control, 4 outrigger supports, 6” 50 taper

42” G&L right angle head available

Plasma burning table

Koike Aronson burning table, with plasma & oxy torches, model VG3500DH, SN VG98190, mfg 98, capacity 967 DNCH, 116” wide by 268” long inside table, with Hypertherm HT4001 plasma cutter, and Hypertherm 301AC-A/039098 chiller, Northrop Grumman controls, pendant control

Welders

Lincoln Idealarc CV-400, SN U1930215775, Code 9405M, with LN-7 wire feed, 100% duty cycle

Lincoln Idealarc CV-400, SN U1040706600, Code 10084M, with LN-7 wire feed, 100% duty cycle

Miller 330 A/BP arc welder, SN JB549602, 60% duty cycle, on roller cart

Saws

Marvel 916M horizontal band saw, 9”x16” capacity

Powermatic vert band saw, Model 87, SN 65-6089, 24”x24” table, 12” under guide, 19” throat, with blade welder

Vertical mill

Fryer MB-15, SN 905 0909547, 15-1/2”x 67” table, 30 taper, Anilam 1100M controls, travels – X-50, Y-22, 24” under spindle

Rotary tables

60x84”x16” 1 deg indexing air lift table

48”x60”X12-1/4” Lucas, SN 48BP0460, air operated

Troyke 21” manual

24” manual

Forklifts

Clark C500Y 155BK, diesel, SN Y1015-70-7011CB, 15,500 cap, dual front wheel, solid tire, 137” lift

Clark C500-55, SN 355-1830-2572.174, solid tire, LP, 104” lift, for parts

Also

Oliver drill grinder model 600, SN G-6300, 3-1/2” capacity

State 20” disc sander, model D20, SN H2399, 2 HP motor

Yoshida radial arm drill press, Model YR5-115, SN 5882010, power lock on arm, 36” travel, 13” column, 25-1/2”x19-1/2” right angle box table, 40-1800 rpm spindle, drilling & tapping capacity

Lift-rite pallet jack

5/8” 16 speed drill press

Trent oven, SN 880-96210 KW, 240V, single phase, 2300 deg. F max temp, 12.5”x10” opening, 28.5” deep

S/N & Natl sandblasting pot, 120 psi

Clausing drill press model 2276, SN 516458, 22-1/4”x19-1/2” table, variable speed 150-2000 RPM

US Electrical pedestal grinder, 220v, 1800 RPM

Lista 12 drawer cabinets, 5’ & 42”, 42” 10 & 9 drawer, 2 Lista cabinets

Zep parts washer

Angle plates-matched set 23-3/4”w X 99-5/8” h X 39-3/4” base, matched set cast iron t-slotted – 35-1/4”w x 23-1/4”h x 19-1/4 d, 24-1/4x 35-3/4x23-7/8 slotted, 23-3/4x36-1/2x27-1/2 cast iron t-slotted with steel plates on front

Rahn 24”X36” ledged granite surface plate

New carbide inserts from Greenleaf, Kennametal etc

Portapowers

Mill vises

Power & hand tools

Tons of tooling – 50 taper, CAT 50 taper, Cat 40 taper

Machine set up jacks up to 50”

Tool racks, tool carts

Lifting chains & straps

Stock racks & stock, tube, round, hex, rectangle,

60”x96”x4-1/4” steel layout table

48”x96”x7/8” odd shaped steel layout table

50-3/4”x96-1/4”x3/8” steel layout table

Dump hoppers