Market Monday Tool Auction!
Pipe Fitting Equipment - Wrenches - Sockets - Power Tools - Jobsite Boxes & More!
BID NOW THROUGH MARCH 18, 2024. LOTS BEGIN ENDING AT 3 PM. PICKUP WILL BE ON MARCH 19, 2024, BY APPOINTMENT ONLY!!
LOCATED AT: 1582 W. ST. RD. 114, NORTH MANCHESTER, IN 46962
AUCTION MANAGERs: TIM PITTS - 317-714-0432 WITH METZGER AUCTION 260-982-0238
10% BUYER'S PREMIUM ADDED TO EACH WINNING INVOICE!
Telehandler assistance available.
BID NOW AT BIDMETZGER.COM
LOT #S AND DESCRIPTIONS:
1 2001 Chevrolet Silverado 1500, 4x4, miles unknown, full size bed, needs rear leaf springs repaired, runs and drives, but needs Battery, vin# 1GCEK14V71Z303382 - A $25.00 Title Administration fee will be added to the winning invoice
2 Dust Collector and Shaker system, 480 volt, Double Hopper Bin, approximately 90”x112”x 190”tall & Collector Tower Bin, approximately 130”x140”x 50’ tall, 480 volt, 20hp worldwide industrial Motor - TO BE TAKEN DOWN AND REMOVED BY BUYER
3 Pneumatic Urethane Overhead door press 40”x240”x 56”tall - located outside to be Loaded and Removed by Buyer
4 Grutter Machine Works, model 1600, Upcut Saw, pneumatic, 480volt ,24”x25.5”, 43”
5 Scotchman Model MC 250 A Cold Saw with foot control, 480v, with vise and 3- blades on casters
6 National River & mfg vertical Riveter, model 800, needs control, 110v, on rolling base 22”x31”x 73”
7 Tree Vertical Mill, Model 2UVR 10.5”x42” table, 480 volt , 1.5 hp ,3phase , approximately 54”x60”x 78” with accessories, see picture - to be loaded and removed by Buyer
8 Pneumatic Over Head Chain Hoist Lifting System, Harrington 1 Ton 32”x98”x 22” as Shown
9 Greenlee No 545 Double End Tenoner Machine, 480 volt, extra cutters, approximately 164”x15’x 78” - Located inside, will need to be partially disassembled to remove, Buyer responsible to disassemble, move and load item
10 Kobalt 60Gal Upright Air Compressor, 3.7 running HP, 240 Volt, works, with extension Cord
11 Delta Drill Press, floor model, 3/4 hp, 115/230 volt, 62.5”
1000 Phoenix Dry Rod 22”
1000a Bowl Brush Compete
1001 DeWalt DW077 Rotary Laser in case
1002 DeWalt DW073 Cordless Rotary Laser and accessories in case
1003 2- Metal frames on wheels 23”x42”; 19”x45”
1004 Greenlee Adjustable Cable pull guide stand 12”x 56” as shown
1005 Ridgid 535 Pipe Threader on wheels with foot control, missing 1 leg Stand
1005a Marpol FR Kama model EV 996 Horizontal Band Saw on stand ,control box is broke on bottom
1006 Ridgid 535 Pipe Threader on wheels with foot control
1007 Ridgid 535 Pipe Threader on wheels with foot control
1008 Marpol FR Kama model EV 996 Horizontal Band Saw on rolling stand
1009 Ridgid 535 Pipe Threader on wheels with foot control
1010 Jet Horzontal/vertical Band Saw, model HVBS-56-M, portable
1011 Wellsaw Horizontal Band saw, model 58B, portable
1012 GreenLee Horizonatal Band Saw model 1399
1013 Wellsaw Horizontal Band saw, model 58B, portable
1014 Wellsaw Horizontal Band saw, model 58B, portable
1015 Hypertherm Max 40 Plasma Cutting System, needs repaired, low Arc
1016 Ridgid 535 Pipe Threader on wheels with foot control
1017 Ridgid 535 Pipe Threader on trailer with foot control
1018 Miller RHC-3 Hand Control Stock No 040056 LG-49
1028 Miller RHC-3 Hand Control Stock No 040056 LG 20
1029 Miller RHC-3 Hand Control Stock No 040056 LG-49
1030 Miller RHC-3 Hand Control Stock No 040056 LG-49
1031 2- Corrugated Sheeting hole punching pliers 28”
1032 Nicopress Manual Swagging Tool 18”
1033 2- GS Metals Flextray Cleanshear Cable Tray Cutters Manual Hand Held Cutting Tools 24”
1034 4 Slot Heavy Duty Metal 21” Crimping Tool - Rubber Grip
1035 Felco C9 cable cutters 12”; Greenlee Cable Cutters 21”
1036 Viega 1/2”PEX Crimper 16”; Stakon Terminal Crimper 16”
1037 Viega 1”PEX Crimper 16”; Steel Strap Cutters 18”
1038 2- Zurn 3/4” PEX angle Crimping tools 12”
1039 2- Cable Cutter Replacement heads
1040 Burndy MY29-3 Dieless crimper electrician special, 22”
1041 4 Slot Crimping Tool, 24”
1042 Steel Strap Cutters 25”
1043 STD 3/8”Threaded Rod cutter 30”
1044 2- Marson 325-RN Rivet Tools 20”, 1- VHR-2 Rivet Tool 20”
1045 3- Marson Big Daddy Riveter tools 21”
1046 2– Marson Big Daddy Riveter tools 21”, 1- Fastenal Heavy duty Riveter 21”
1047 3- Rivet Nut Setter RN-1 tools, 1-Marson HP-2 rivet tool
1048 4- Rivet Nut Tools 11”
1049 Zurn 1” PEX Crimping tool 22”; Nicopress Tools 3 slot Crimping tool 20”
1050 3- Greenlee Cable Cutters 32”
1051 2- Cable Cutters 32”
1052 2- Greenlee Cable Cutters 32”
1053 Greenlee Cable Cutters 37”
1054 T&B TBM-8 Crimper 26”
1055 DMC HX4 crimping tool, crimping pliers, wire stripping pliers, miscellaneous tools
1056 Crimping Pliers, Cutting Pliers
1057 Stakon Crimping Pliers, crimping pliers, miscellaneous
1058 Greenlee Cable Cutters 18”; crimpers 17”
1059 2- Viega 1/2” PEX Crimping Tools 16”
1060 3- FNL Riveter Tools 21”
1061 3- FNL Riveter Tools 21”
1062 GS Metals Flextray CleanShear Cutter, pneumatic
1063 GS Metals Flextray CleanShear Cutter, pneumatic
1064 Pipe Label Assortment, Water, Gas
1065 Greenlee Lock Collar Assembly assortment - Small & Large - Wheeler Rex Pipe Tool PSI Gauge
1066 Victaulic Roll Grooving Tool on legs with foot control, 58”H
1066a 4 Metal Industrial Attachment 16”
1067 Greenlee 1800 Mechanical Bender on wheels
1068 Dynalectric Black & Decker Two Speed Power Unit on Truco Stand , 44”
1069 Ridge RE 6/Re 60 Electric tool ,cut ,Crimp , punch tool kit in case ,missing some pieces see picture
1070 Hydraulic knock out Punch 14”
1071 Greenlee No.1731 Hydraulic C-Frame Knockout Punch Driver
1072 Greenlee Slug Buster punch set with Greenlee 767A hand pump in case
1073 PEX Line uncoiler Rack
1074 Little Kicker 3/4” Emt Off Set Bender 27”,mounted on board
1075 Five - Greenlee 767 Hydraulic Hand Pumps with Knockout Rams
1076 Two - Greenlee Fiberglass Fish Tape in reel on stand 3/16” x 250’
1077 Fiber Glass Systems Shaver Prep Tool 775-052-1
1078 Greenlee 690 Blower Fishing System Serial #AAR 7209
1079 Greenlee 960 Blower & Vacuum Fish Tape System Serial # VM 44010
1080 Greenlee 960 Vacuum Blower Fishing System (lid is broke)
1081 Two - Greenlee 1811 Offset Bender for 3/4" EMT 27”
1082 Two - Greenlee 1811 Offset Bender for 3/4" EMT 27”
1083 Two - Greenlee 1811 Offset Bender for 3/4" EMT 27”
1084 Two - Greenlee 1811 Offset Bender for 3/4" EMT 27”
1085 Two - Greenlee 1811 Offset Bender for 3/4" EMT 27”
1086 Two - Greenlee 1811 Offset Bender for 3/4" EMT 27”
1087 Two - Greenlee 1811 Offset Bender for 3/4" EMT 27”
1088 Heavy Duty Poly Tensioner Suits Woven Polyester Strapping 10.5”
1089 Greenlee 36587 Threaded Rod Cutter 1/4" + 3/8" - 22”
1090 Three - Greenlee Cable Cutters 31”
1091 Protecta Pro Full Body Harness NIP
1092 Greenlee Adapter 6”x16”, miscellaneous Shaft bracket 7”x17”
1093 Felco C6 Cable Cutters 23”
1094 Burndy Crimping Tool 22”
1095 2- Cable Cutters 32”, 1 is Greenlee
1096 2- Cable Cutters 32”, 36” - 32” pair is Greenlee
1097 Greenlee 751-M2 Hydraulic Cable Cutter Shear Head For Greenlee 746
1098 Greenlee 751-M2 Hydraulic Cable Cutter Shear Head For Greenlee 746
1099 Climax Valve Lubricants gun model 105
1100 Climax Valve Lubricants gun model 105
1101 Wright Grip 1 3/4” Combination Wrench, 24.5”
1102 Wright Grip 1 7/8”Combination Wrench, 27”
1103 Wright Grip 1 7/8” Combination Wrench, 27”
1104 Wright Grip 1 3/4” Combination Wrench, 25”
1105 Wright Grip 1 3/4” Combination Wrench, 25”
1106 Wright 1 7/8” Combination Wrench 27”
1107 Wright Grip 1 7/8” Combination Wrench, 27”
1108 Wright Grip 1 3/4” Combination Wrench, 25”
1109 Wright 1 7/8” Combination Wrench 27”
1110 Wright Grip 1 3/4” Combination Wrench, 25”
1111 Jet 1 7/8” Combination Wrench 24”
1112 Tekton 1 3/4”Combination Wrench 22”
1113 Armstron 1 1/2”Combination Wrench 21”
1114 Rock River 1 5/8” Combination Wrench 22”
1115 Professional 1 5/8” Combination Wrench 23”
1116 Wright Grip 1 1/2”Combination Wrench, 21”
1117 Rock River 1 5/8” Combination Wrench 22”
1118 Wright Grip 1 1/2”Combination Wrench, 21”
1119 Wright Grip 1 7/16”Combination Wrench, 20”
1120 Wright Grip 1 1/2”Combination Wrench, 21”
1121 8- Combination Wrenches 15/16” - 1 7/8”
1122 8- Combination Wrenches 15/16” - 1 5/8”
1123 7- Combination Wrenches 15/16”- 1 5/8”
1124 5- Combination Wrenches 15/16”, 1”, 1 1/6”, 1 1/8”, 1 1/4”
1125 10- Combination Wrenches 15/16”- 1 7/8”
1126 10- Combination Wrenches 15/16”- 1 7/8”
1127 6- Combination Wrenches 15/16”- 1 7/16”
1128 5- Combination Wrenches 15/16”, 1”, 1 1/6”, 1 1/8”, 1 1/4”
1129 5- Combination Wrenches 15/16”, 1”, 1 1/6”, 1 1/8”, 1 1/4”
1130 5- Combination Wrenches 15/16”, 1”, 1 1/6”, 1 1/8”, 1 1/4”
1131 5- Combination Wrenches 15/16”, 1”, 1 1/6”, 1 1/8”, 1 1/4”
1132 5- Combination Wrenches 15/16”, 1”, 1 1/6”, 1 1/8”, 1 1/4”
1133 5- Combination Wrenches 15/16”, 1”, 1 1/6”, 1 1/8”, 1 1/4”
1134 5- Combination Wrenches 15/16”, 1”, 1 1/6”, 1 1/8”, 1 1/4”
1135 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1136 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1137 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1138 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1139 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1140 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1141 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1142 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1143 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1144 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1145 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1146 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1147 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1148 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1149 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1150 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1151 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1152 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1153 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1154 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1155 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1156 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1157 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1158 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1159 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1160 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1161 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1162 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1163 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1164 5- Combination Wrenches 15/16”,1”, 1 1/6”,1 1/8”, 1 1/4”
1165 T&B TMB-8 Crimper Tool 26”
1166 2- Thomas & Betts Stakon Termals Crimpers 16”
1167 2- Dieless Crimpers 22”
1168 2- Dieless Crimpers 22”
1169 Rhino 5200 Advanced Labeling Tool in case
1170 Rhino 5200 Advanced Labeling Tool in case
1171 Brady IDXPERT Handheld Labeler with accessories in case
1172 7 V-Safe VS13R Valve Locks 4”x10” red
1173 2- Ideal Fish Tapes - 1 Metal fish tape, 1 cable
1174 2- Greenlee fish tapes - 1 metal, 1 cable
1175 2- Ideal Metal Fish Tapes
1176 2- Ideal Metal Fish Tapes
1177 2- Ideal Metal Fish Tapes
1178 2- Greenlee Metal Fish tapes
1179 2- Ideal Fish Tapes - 1 metal, 1 Fiberglass
1180 2- Greenlee Fish Tapes - 1 Metal, 1 cable
1181 2- Ideal Metal Fish Tapes
1182 2- Ideal Fiberglass Fish tapes - 1 tip broke rolled up inside - 1 Gardner Bender Metal
1183 2- Greenlee Fish Tapes - 1 Metal, 1 Stainless Steel
1184 Plastic Coated Cable with loop ends
1185 Climax Valve Lubricants gun model 105, assorted Grease Guns
1186 7- Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4" , 1 7/16", 1 1/2 "
1187 7- Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4" , 1 7/16", 1 1/2 "
1188 7- Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4" , 1 7/16", 1 1/2 "
1189 7- Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4" , 1 7/16", 1 1/2 "
1190 7- Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4" , 1 7/16", 1 1/2 "
1191 7- Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4" , 1 7/16", 1 1/2 "
1192 7- Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4" , 1 7/16", 1 1/2 "
1193 6 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4" , 1 7/16"
1194 6 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4" , 1 7/16"
1195 6 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4" , 1 7/16"
1196 6 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4" , 1 7/16"
1197 6 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4" , 1 7/16"
1198 6 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4" , 1 7/16"
1199 6 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4" , 1 7/16"
1200 6 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4" , 1 7/16"
1201 5 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4"
1202 5 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4"
1203 5 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4"
1204 5 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4"
1205 5 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4"
1206 5 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4"
1207 5 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4"
1208 5 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4"
1209 5 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4"
1210 5 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4"
1211 5 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4"
1212 5 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4"
1213 5 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4"
1214 5 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4"
1215 5 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4"
1216 5 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4"
1217 5 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4"
1218 5 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4"
1219 5 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4"
1220 5 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4"
1221 5 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4"
1222 5 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4"
1223 5 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4"
1224 5 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4"
1225 5 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4"
1226 5 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4"
1227 5 Combination wrenches 15/16", 1", 1 1/16", 1 1/8", 1 1/4"
1228 8 Combination wrenches 2- 1", 2- 1 1/16", 2- 1 1/8", 2- 1 1/4"
1229 8 Combination wrenches 2- 1", 2- 1 1/16", 2- 1 1/8", 2- 1 1/4"
1230 8 Combination wrenches 2- 1", 2- 1 1/16", 2- 1 1/8", 2- 1 1/4"
1231 8 Combination wrenches 2- 1", 2- 1 1/16", 2- 1 1/8", 2- 1 1/4"
1232 8 Combination wrenches 2- 1", 2- 1 1/16", 2- 1 1/8", 2- 1 1/4"
1233 8 Combination wrenches 2- 1", 2- 1 1/16", 2- 1 1/8", 2- 1 1/4"
1234 8 Combination wrenches 2- 1", 2- 1 1/16", 2- 1 1/8", 2- 1 1/4"
1235 8 Combination wrenches 2- 1", 2- 1 1/16", 2- 1 1/8", 2- 1 1/4"
1236 8 Combination wrenches 2- 1", 2- 1 1/16", 2- 1 1/8", 2- 1 1/4"
1237 8 Combination wrenches 2- 1", 2- 1 1/16", 2- 1 1/8", 2- 1 1/4"
1238 8 Combination wrenches 2- 1", 2- 1 1/16", 2- 1 1/8", 2- 1 1/4"
1239 8 Combination wrenches 2- 1", 2- 1 1/16", 2- 1 1/8", 2- 1 1/4"
1240 8 Combination wrenches 2- 1", 2- 1 1/16", 2- 1 1/8", 2- 1 1/4"
1241 8 Combination wrenches 2- 1", 2- 1 1/16", 2- 1 1/8", 2- 1 1/4"
1242 8 Combination wrenches 2- 1", 2- 1 1/16", 2- 1 1/8", 2- 1 1/4"
1243 8 Combination wrenches 2- 1", 2- 1 1/16", 2- 1 1/8", 2- 1 1/4"
1244 8 Combination wrenches 2- 1", 2- 1 1/16", 2- 1 1/8", 2- 1 1/4"
1245 8 Combination wrenches 2- 1", 2- 1 1/16", 2- 1 1/8", 2- 1 1/4"
1246 8 Combination wrenches 2- 1", 2- 1 1/16", 2- 1 1/8", 2- 1 1/4"
1247 8 Combination wrenches 2- 1", 2- 1 1/16", 2- 1 1/8", 2- 1 1/4"
1248 8 Combination wrenches 2- 1", 2- 1 1/16", 2- 1 1/8", 2- 1 1/4"
1249 8 Combination wrenches 2- 1", 2- 1 1/16", 2- 1 1/8", 2- 1 1/4"
1250 8 Combination wrenches 2- 1", 2- 1 1/16", 2- 1 1/8", 2- 1 1/4"
1251 8 Combination wrenches 2- 1", 2- 1 1/16", 2- 1 1/8", 2- 1 1/4"
1252 8 Combination wrenches 2- 1", 2- 1 1/16", 2- 1 1/8", 2- 1 1/4"
1253 8 Combination wrenches 2- 1", 2- 1 1/16", 2- 1 1/8", 2- 1 1/4"
1254 8 Combination wrenches 4- 1 1/16", 4- 1 1/8"
1255 8 Combination wrenches 4- 1 1/16", 4- 1 1/8"
1256 8 Combination wrenches 4- 1 1/16", 4- 1 1/8"
1257 8 Combination wrenches 4- 1 1/16", 4- 1 1/8"
1258 8 Combination wrenches 4- 1 1/16", 4- 1 1/8"
1259 8 Combination wrenches 4- 1 1/16", 4- 1 1/8"
1260 8 Combination wrenches 4- 1 1/16", 4- 1 1/8"
1261 8 Combination wrenches 4- 1 1/16", 4- 1 1/8"
1262 8 Combination wrenches 4- 1 1/16", 4- 1 1/8"
1263 8 Combination wrenches 4- 1 1/16", 4- 1 1/8"
1264 8 Combination wrenches 4- 1 1/16", 4- 1 1/8"
1264a 8 Combination wrenches 4- 1 1/16", 4- 1 1/8"
1265 8 Combination wrenches 4- 1 1/16", 4- 1 1/8"
1266 7 boxes Ericson string light guards 10 sets per case
1267 27 Combination wrenches assortment
1268 18 Combination wrenches assortment
1269 19 Combination wrenches assortment
1270 8- 1 1/16" combination wrenches
1271 8- 1 1/16" combination wrenches
1272 8- 1 1/16" combination wrenches
1273 8- 1 1/16" combination wrenches
1274 Metal stackable organizer Tray, 12”x20.5”x 9.5”
1275 Dottie Hydraulic Knock Out Punch Set in Case
1276 Dottie Hydraulic Knock Out Punch Set in case
1277 Dottie Hydraulic Knock Out Punch Set in case Missing some pieces, see picture, case missing Latch
1278 Thomas &Betts TBM8 Crimpers 26” with extra dies in Case
1279 Thomas &Betts TBM6S Crimper with extra dies in Case
1280 Thomas & Bettes TBM8 Crimpers 25” with extra Dies in metal Case
1281 Thomas & Bettes TBM8 Crimpers 25” with extra Dies in metal Case
1282 Thomas & Bettes TBM 8 Crimpers, 25” and extra dies in metal Case
1283 Thomas & Bettes TBM5 Crimpers 25” with extra Dies in metal case
1284 Thomas & Bettes TBM8 Crimpers 25” with extra Dies in metal Case
1285 Thomas & Bettes TBM8 Crimpers 25” with extra Dies in metal Case
1286 Thomas & Bettes TBM8 Crimpers 25” with extra Dies in metal Case
1287 Greenlee No 1804 Ratchet Knockout Punch Driver Set in case
1288 Anderson Electric Connectors Hydraulic pump 1/2hp in case
1289 Burndy EPP Electrical Hydraulic pump model 0 in case
1290 Greenlee 767 hydraulic knock out punch driver, partial set in Case
1291 Greenlee 767 hydraulic knock out punch driver, partial set in Case
1292 Greenlee 767 hydraulic knock out punch driver, partial set in Case
1293 Heatway Pex Tubing and Fittings tool Kit in Case 1/2”-5/8”
1294 Gear Wrench 1” Combination Wrench
1295 Roper Whitney Punch no. 5 Junior set in Case
1296 Ridgid Pipe Thawer KT 200 with leads in Case
1297 Hydraulic Cable Cutter head with hose in case
1298 Huskee Model R - 14EF Hydraulic Pump with Foot Control and Cable Cutter Head in Case
1299 2- Heavy duty riveter tools - Big Daddy Riveter 21”, Value River VHR-2 21”
1300 2 - Heavy duty FNL riveter tools 21”
1301 2 - Heavy duty FNL riveter tools 21”
1302 11- Combination wrench assortment in bucket
1303 8 Combination wrench set 15/16, 1”, 1/16”, 1-1/8, 1-1/4, 1-7/16, 1-1/2, 1-3/4
1304 10 - Combination wrench assortment in bucket 15/16, 1”, 1-1/16, 1-1/8, 3-1-1/4, 1-1/2, 1-7/16, 1-3/4
1305 1/2" deep well socket assortment in metal bin 19" x 9.5"
1306 Short Drive Socket Assortment 1/2”-11/16” in metal bin 19' x 9.5 "
1307 1/2”-3/8” drive socket assortment in metal tub 19" x 9.5 "
1308 1/2" Socket Assortment with metal bin 19" x 9.5"
1309 1/2 drive socket assortment in metal bin 19" x 9.5"
1310 1/2" and 3/8" drive socket assortment in metal bin 19" x 9.5"
1311 1/2” drive socket assortment in metal bin 19" x 9.5 "
1312 3/8” drive socket assortment with 5- 1/2" drive deep well in metal bin 19" x 9.5"
1313 1/2" drive deep well socket assortment in metal bin 19" x 9.5"
1314 3/8" drive socket assortment in metal bin 19" x 9.5 "
1315 Westward 6 piece 3/8,1/2” Drive Hex Bit Socket Assortment in metal bin 19" x 9.5"
1316 3" drive socket assortment in metal bin 19" x 9.5"
1317 1/2" Drive deep well Socket Assortment in metal bin 19" x 9.5"
1318 1/2" drive deep well socket assortment in metal bin 19 " x 9.5"
1319 1/2" drive deep well socket assortment in metal bin 19"x 9.5"
1320 Dry Core concrete hole saws - 1 1/2”, 2 1/2”, 4 1/2”,5”, 6”
1321 Dry Core concrete hole saws 1”, 2”, 3” ,4” ,5”
1322 Dry Core concrete hole saws 1 1/4” ,2 1/4”, 3.5”, 4.5” , 6”
1323 Dry Core concrete hole saws 1”, 2” , 3”, 4 1/2”, 5”, 6”
1324 Dry Core concrete hole saws 1.5” ,2”, 2 .5” , 4”, 4.5”,5”, 6
1325 Dry Core concrete hole saws 1 1/2”, 2” ,3”, 4” ,5” , 6”
1326 Dry Core concrete hole saws 2”, 3”, 4”, 5”, 6”
1327 Dry Core concrete hole saw, 1”,1 3/4”, 2.5”, 3”, 4”, 5”, 6”
1328 Dry Core concrete hole saws 1 1/2”, 2”, 2 1/2” , 4”, 5”, 6”
1329 Dry Core concrete hole saws 3”, 4”, 5”, 6”
1330 Dry Core concrete hole saws 1 1/2”, 3”, 4”, 5” , 6”
1331 Dry Core concrete hole saws 1 3/4”, 3”, 4”, 5”, 6”
1332 Dry Core concrete hole saws 3”, 4”, 4.5”, 6”
1333 Dry Core concrete hole saws 4- 3”, 1-3.5”, 3- 4”, 2- 4.5”
1334 Dry Core concrete hole saws 1.5”, 2”, 3”, 4”, 5”,6”
1334a Dry Core concrete hole saws 1.5”, 2”, 3”, 4”, 5”, 6”
1335 Dry Core concrete hole saws 2”,3”, 3.5”, 4.5 ”, 5”, 6”
1336 26” Concrete Cutter Blade, 1” arbor
1337 4- Band Saw Blades, 93” length
1338 9- Ridgid Pipe Threader Dies, assorted sizes
1339 9- Ridgid Pipe Threader Dies, assorted sizes
1340 10- Ridgid Pipe Threader Dies, assorted sizes
1341 Threaded Handles
1342 6– Ridgid Pipe Threader Dies, assorted sizes
1343 5- Ridgid Pipe Threader Dies, assorted sizes
1344 7- Ridgid Pipe Threader Dies, assorted sizes
1345 Roper Whitney Punch Press 7.5”x10.5”
1346 DeWalt DWF43144 6” Angle Grinder, Ad Tech Pro 200 glue gun
1347 9- Ridgid Pipe Threader Dies, assorted sizes
1348 6- Ridgid Pipe Threader Dies, assorted sizes
1349 Flashlight Assortment
1350 50 - 3/8” drive, 5/8” deepwell sockets
1351 50 - 3/8” Drive 5/8” Deepwell Socket
1352 50 - 3/8” Drive 5/8” Deepwell Socket
1353 50 - 3/8” Drive 5/8” Deepwell Sockets
1354 50 - 3/8” drive, 11/16” deepwell sockets
1355 50 - 3/8” Drive 11/16” Deepwell Sockets
1356 50 - 3/8” Drive 11/16” Deepwell Sockets
1357 50 - 3/8” Drive 11/16” Deepwell Sockets
1358 50 - 3/8” Drive 13/16” Deep Well Sockets
1359 50 - 3/8” Drive 13/16” Deep Well Sockets
1360 50 - 3/8” drive, 13/16” deepwell sockets
1361 50 - 3/8” drive, 13/16” deepwell sockets
1362 Brandex Everlast Truck Bodies fiberglass topper with side tool boxes, ladder racks and back doors, for 8’ bed
1363 Rollaround Metal Cabinet 24”x60”x 67”, Door latch needs work didn’t open
1364 Metal roll around job box 61”x 32”x 56.5” (dented)
1365 Metal Roll Around Job Box Dented 60x30 3/8”x55 1/2”
1366 Doube sided metal roll around cabinet 60”x 30”x 65” (dented, doors don’t open,latches need work)
1367 Metal Roll Around Job Box Lid Bent Doesn’t Close All the Way 48x30x41 1/2”
1368 Metal roll around job box 48.5”x 31”x 54”
1369 Metal RollAround Job Box 30.5”x60.5”x 54”, dented
1370 Metal RollAround Job Box 60.5”x 30.5”x 56” (dented)
1371 Metal RollAround Job Box 30.5”x60.5”x54”, dented
1372 Metal Roll Around Job Box 50 1/2x31x56”
1373 Metal Roll Around Job Box 50 1/2x31x52”
1374 Metal Roll Around Job Box 61”x 31”x 55.5” (dented)
1375 Metal RollAround Job Box 30.5”x60.5”x54”, dented
1376 Knack Model 89 Metal Roll Around Job Box 50 1/2x31x56”
1377 Metal RollAround Job Box 60.5”x 30.75”x 56” (dented)
1378 Metal RollAround Cabinet Double Sided 26.5”x48”x 68”
1379 Metal RollAround Job Box 30.5”x60.5”x54”, dented
1380 Metal Roll Around Job Box 50 1/2x31x54”
1381 Metal Roll Around Job Box 42x19x29”
1382 Metal Roll Around cabinet 60”x 67”x 24” (doors are bent)
1385 1” drive 2 1/2” impact socket
1386 3- 1” drive Sockets 2 1/2”, 2 3/4”, 2 15/16”
1387 4- 3/4” drive universal joints
1388 1” Drive 2 1/2” impact socket
1389 3/4” drive 2 7/16” Deep well impact socket
1390 3-4” drive 2 1/4” impact socket
1391 3- 3/4”drive impact sockets 2- 1 7/8”, 1- 1 15/16”
1392 3- 3/4” drive Sockets 2- 2 3-8“; 1 - 2 5/16”
1393 Hex bit socket assortment 3/8”and 1/2” drive
1394 Plumbers T-Handled torque wrench assortment
1394a Plumbers T-Handled torque wrench assortment
1395 Metal Shears / Tin Snip assortment
1396 Tubler Wrench assortment, some snap-on miscellaneous wrenches
1397 Ratchet wrenches, wrench assortment
1398 Socket Drive Adapters assortment
1399 Allen wrench assortment, large sizes
1399a Allen wrench Assortment
1400 Allen Wrench Assortment
1401 Allen Wrench Assortment, various sizes
1402 Box End Wrench assortment
1403 1/2” drive Extension assortment, 1/2” drive universal joint
1404 1/2”Drive Impact sockets ,sizes from 1 1/6”- 2”
1405 Socket holder strips , 2- metal shafts
1406 3/8” drive Extension Assortment
1407 Makita Core Bit 4”, NIP
1408 Makita Core Bit 2”
1409 2- Makita Core Bit Drift pins, 2- Makita 1 3/8” Vacuum Attachments
1410 Nut Driver assortment 11/32”
1411 1/2” drive Speed Wrench, break over extensions
1412 3/4” drive socket Assortment 15/16”- 2”
1413 3/4” drive socket Assortment 7/8”- 2 1/8”
1414 3/4” drive socket Assortment 15/16”- 2 3/8”
1415 5- 3/4” drive 1 5/8”deepwell
1416 Allen wrenches partial set in case
1417 T-Handled Allen Wrench Assortment
1418 T-Handled Allen Wrench Assortment
1419 Allen Wrench Assortment
1420 Nut Drivers, mostly 3/16”
1421 Wrench Assortment
1422 Wrench Assortment
1423 T-Handled Allen Wrench Assortment
1424 T-Handled Allen Wrench Assortment
1425 3/4” Drive Extension Assortment
1426 3/4” Drive Extension Assortment
1427 3/4” Drive Extension Assortment
1428 1/4” drive socket drivers
1429 Husky Metric Wrench Set in carrier 8mm -19mm
1430 1/4” drive socket drivers
1431 3/4” Drive Breakover Bar, T-Bar
1432 2- 3/4” Drive Breakover Bars
1433 Armstrong 3/4” Drive Ratchet
1434 3/4” drive Rachet
1434a 3- 1” Drive sockets inc. 1- 5/16”, 1- 13/16”, 2- 3/16”, female 3/4” to 1” adapter
1435 3/4” drive sockets 7/8”- 2 3/8”
1436 2- Williams 1/2” drive 35 mm deep well Sockets, new
1437 2- Williams 1/2” drive 21 mm deep well Sockets, new
1438 2- Williams 1/2” drive 36 mm deep well Sockets, new
1439 2- 1/2” drive Williams 36mm Deepwell sockets, new
1440 2-Proto 1/2” drive 28mm deep well Sockets, new
1441 2-Proto 1/2” drive 29 mm deep well Sockets, new
1442 2- 1/2” drive Williams 18mm Deepwell sockets, new
1443 2- 1/2” drive Williams 32 mm Deepwell sockets, new
1444 2- 1/2” drive Williams 22 mm Deepwell sockets, new
1445 2- 1/2” drive Williams 17mm Deepwell sockets, new
1446 2- 1/2” drive Williams 27mm Deepwell sockets, new
1447 2- 1/2” drive Williams 23 mm Deepwell sockets, new
1448 2- 1/2” drive Williams 26mm Deepwell sockets, new
1449 2-Proto 1/2” drive 33 mm deep well Sockets, new
1450 2- 1/2” drive Williams 19 mm Deepwell sockets, new
1451 2- 1/2” drive Williams 20mm Deepwell sockets, new
1452 2-Proto 1/2” drive 25 mm deep well Sockets, new
1453 2- 1/2” drive Williams 34 mm Deepwell sockets, new
1454 2- 1/2” drive Williams 24 mm Deepwell sockets, new
1455 2- 1/2” drive Williams 30mm Deepwell sockets, new
1456 2- 1/2” drive Wright 31 mm Deepwell sockets, new
1457 3/4” Drive Assorted Deep well sockets, 12 sockets
1458 3/4” drive impact sockets 1”, 1 1/16”, 1 1/8”, 12 total
1459 3/4” drive Sockets 15/16”-2 1/8”, assorted sizes
1460 3/4” drive impact socket assortment 1 1/8”-1 11/16”, 12 sockets total
1461 3/4” drive Deepwell sockets, 5 sockets
1462 3/4” drive impact sockets 1 7/16”- 2 1/8”, 5 sockets
1463 3/4” drive Socket assortment 7/8”- 2”
1464 3/4” Drive Assorted Impact Sockets in yellow Bin 6.5”x4”x18”
1465 1/2” Drive Deep Well Impact Sockets
1466 3/8” Drive Deep Well Impact Socket assortment with Blue Bin 8.25”x4”x11.5”
1467 1/2” Drive Deep Well Impact Sockets
1468 3/8” Drive Deep Well Impact Socket assortment
1469 1/2” Drive Socket assortment
1473 1/2” Drive Socket Assortment
1474 1/2” Drive Impact Socket assortment with blue bin 5.5”x5”x10.5”
1475 1/2” Drive Impact Socket assortment in blue bin 5.5”x5”x10.5”
1476 Three - New 1/2” Drive Impact Sockets includes - (2) 3/4” & (1) 15/16” in blue bin 4.25”x4”x11.5”
1477 (2) 3/8" Drive Boxsok Rapid Assembly Tool, 4-1/2" Overall Length • misc sockets in red bin 5.5”x5”x11”
1478 1/2” Drive Impact Socket assortment in red bin 5.5”x5”x10.5”
1479 Pittsburg Pro 1/2” Drive 10 pc. Chrome Deep Well Socket Set 7/16” - 15/16”
1480 1/2” Drive Socket set 7/16” - 1”
1481 1/2” Drive Impact Deep Well Socket assortment and Extension
1482 1/2” Drive Impact Socket Set 13/16” - 1-1/4”
1483 1/2” Drive Impact Socket set 3/4” - 1-1/8”
1484 3/4” Drive Impact Socket assortment
1485 1/2” Drive Impact Deep Well Socket set 3/8” - 1-1/4”
1486 1/2” Drive Socket set (missing one) 12” - 1”
1487 3/4” Drive Socket assortment
1488 3/4” Drive Impact Socket assortment with 1/2”-3/4” Drive Adaper
1489 1/2” Drive Impact Socket assortment
1490 3/4” Drive Impact Socket assortment
1491 3/4” Drive Impact Socket assortment
1492 3/4” Drive Impact Socket assortment with 7/8” Drive & 1 1/16” Drive Extensions
1493 3/4” Drive Impact Socket assortment
1494 1” Drive Wright Ratchet • 1” Drive T Bar • (2) 1” Drive Extension Sockets
1495 Group Of Four Matching Vintage American Industrial Stackable Olive Green Enameled "Hopper" Boxes 11”x35.5”x19
1496 Group Of Four Matching Vintage American Industrial Stackable Olive Green Enameled "Hopper" Boxes 11”x35.5”x19
1497 Group Of Four Matching Vintage American Industrial Stackable Olive Green Enameled "Hopper" Boxes 11”x35.5”x19
1498 Group Of Three Matching Vintage American Industrial Stackable Olive Green Enameled "Hopper" Boxes 11”x26.5”x16”
1499 Group Of Three Matching Vintage American Industrial Stackable Olive Green Enameled "Hopper" Boxes 11”x26.5”x16”
1500 Group Of Two Matching Vintage American Industrial Stackable Olive Green Enameled "Hopper" Boxes 13.75”x22.25”x20.75”
1501 Pipe cutter handles
1502 Ridgid pipe vise with extra chains
1503 Ridgid Pipe vise
1504 Ridgid Pipe vise
1505 Ridgid pipe cutter
1506 Ridgid pipe cutter
1507 Ridgid BC-210 chain vise
1508 Ridgid bench chain vise BC-810
1509 Ridgid pipe cutter
1510 Ridgid no 23 pipe vise
1511 Ridgid pipe cutter with reemer
1512 Ridgid pipe cutter with reemer
1513 Ridgid pipe cutter with reemer
1514 Ridgid pipe cutter with reemer
1515 Ridgid pipe cutter with reemer
1516 Ridgid pipe cutter with reemer
1517 Ridgid pipe cutter with reemer
1518 Ridgid pipe cutter with reemer
1519 Ridgid pipe cutter with reemer
1520 Ridgid pipe cutter with reemer
1521 Ridgid pipe cutter with reemer
1522 Ridgid reemer attachment
1523 Ridgid pipe cutter with reemer
1524 Ridgid pipe cutter with reemer
1525 Ridgid pipe cutter with reemer
1526 Ridgid pipe cutter with reemer
1526a Ridgid pipe cutter with reemer
1527 Ridgid pipe cutter with reemer
1528 Ridgid pipe cutter with reemer
1529 Ridgid pipe cutter with reemer
1530 Ridgid pipe cutter with reemer
1531 Milwaukee Heavy Duty Bandsaw 20”
1532 DeWalt Reciprocating Saw 1 1/8” Stroke
1533 Milwaukee Heavy Duty Bandsaw 20”
1534 Dewalt 5”, 27” Deep Cut Variable Speed Band Saw
1535 Milwaukee Heavy Duty Bandsaw 20”
1536 Milwaukee Heavy Duty Bandsaw 20”
1537 Dewalt Heavy Duty Bandsaw 20”
1538 Milwaukee Heavy Duty Bandsaw 20”
1539 DeWalt Grinder plug in
1540 Dewalt 18V BandSaw
1541 Milwaukee Heavy Duty Bandsaw 20”
1542 DeWalt Reciprocating saw 1 1/8” Stroke
1543 Milwaukee Heavy Duty Bandsaw 20”
1544 Milwaukee Heavy Duty Reciprocating Saw 20”
1545 Milwaukee Heavy Duty Reciprocating Saw 20”
1546 DeWalt 6” Angle Grinder, 4.5” Angle Grinder
1547 Milwaukee Heavy Duty Reciprocating Saw 20”
1548 Bosch Roto Hammer 23”
1549 Dewalt Heavy Duty Reciprocating Saw 29mm
1550 Bosch Constant Orbit 25mm 1” Stroke
1551 DeWalt Heavy Duty Reciprocating Saw 1 1/8 Stroke 29mm
1552 Milwaukee Heavy Duty Bandsaw 20”
1553 Makita Heavy Duty Bandsaw 20”
1554 Milwaukee Heavy Duty Bandsaw 20”
1555 Milwaukee Heavy Duty Bandsaw 20”
1556 DeWalt Heavy Duty Bandsaw 20”
1557 Milwaukee Heavy Duty Bandsaw 20”
1558 Milwaukee Heavy Duty Bandsaw 20”
1559 Milwaukee Heavy Duty Bandsaw 20”
1560 Rebel Protecta Retracing Lifeline
1561 Miller Falcon 20ft Retractable Life Line
1562 Retractable Lifeline
1563 Makita Hammer Drill 16”
1564 Makita Hammer Drill 16”
1565 DeWalt Heavy Duty Reciprocating Saw 1 1/8 Stroke 29mm
1566 Dewalt Angle Grinder 9” 230 mm
1567 Dewalt Angle Grinder 9” 230 mm
1568 Makita Concrete/Benton/Concreto 1” 026mm Steel/Acier/Acero 1/2” 013mm
1569 Milwaukee Magnum Corded Drill 10” (Burnt Motor)
1570 Dewalt Angle Grinder 11”, Bosch Angle Grinder 11”
1571 2- Dewalt cordless drills 18v and charger
1572 Makita Hammer Drill 16”
1573 Makita Grinder 9557PB
1574 Black and Decker 120v 1/2” Impact Wrench
1575 Dewalt 1/2” 13mm VSR Hammer Drill
1576 Rebel Protecta Retracing Lifeline
1577 Craftsman Reciprocating Saw 120v
1578 Battery Flash Light Assortment
1579 Battery Flash Light Assortment
1580 Battery Flash Light Assortment
1581 Battery Flash Light Assortment
1582 Battery Flash Light Assortment
1583 Battery Flash Light Assortment
1584 Battery Flash Light Assortment
1585 Miller Mini Lite Fall Limiter 11 ft
1586 DBI Sala Retracting Lifeline 11Ft
1587 DBI Sala Retracting Lifeline 11Ft
1588 Twin Turbo Miller Retractable Life Lines 24”
1589 Miller Turno Lite Edge 2 Tie Personal Fall Limiters 20ft
1590 Miller Turno Lite Edge 2 Tie Personal Fall Limiters 20ft
1591 Miller Turno Lite Edge 2 Tie Personal Fall Limiters 20ft 12/12ft
1592 Miller Turno Lite Edge 2 Tie Personal Fall Limiters 20ft 12/12 ft
1593 Miller Turno Lite Edge 2 Tie Personal Fall Limiters 20ft 12/12 ft
1594 Miller Turno Lite Edge 2 Tie Personal Fall Limiters 20ft
1595 Miller Turno Lite Edge 2 Tie Personal Fall Limiters 20ft 12/12 ft
1596 Miller Turno Lite Edge 2 Tie Personal Fall Limiters 20ft
1597 Miller Turno Lite Edge 2 Tie Personal Fall Limiters 20ft
1598 Miller Turno Lite Edge 2 Tie Personal Fall Limiters 20ft
1599 Miller Turno Lite Edge 2 Tie Personal Fall Limiters 20ft
1600 Miller Turno Lite Edge 2 Tie Personal Fall Limiters 20ft
1601 Miller Turno Lite Edge 2 Tie Personal Fall Limiters 20ft
1602 Miller Turno Lite Edge 2 Tie Personal Fall Limiters 20ft
1603 Miller Turno Lite Edge 2 Tie Personal Fall Limiters 20ft
1604 Miller Turno Lite Edge 2 Tie Personal Fall Limiters 20ft
1605 Miller Turno Lite Edge 2 Tie Personal Fall Limiters 20ft
1606 Miller Turno Lite Edge 2 Tie Personal Fall Limiters 20ft
1607 Miller Turno Lite Edge 2 Tie Personal Fall Limiters 20ft
1608 Fall Tech 9ft Web Max Twin Leg Steel Carabiner+Alum Rebar Hook NIB
1609 Fall Tech 9ft Web Max Twin Leg Steel Carabiner+Alum Rebar Hook NIB
1610 Fall Tech 9ft Web Max Twin Leg Steel Carabiner+Alum snap hook Hook NIB
1611 Fall Tech 9ft Web Max Twin Leg Steel Carabiner+Alum snap hook Hook NIB
1612 Miller turbo lite 6ft fall protection
1613 Miller self retracting line Mp20g Z7/20ft falcon SLR, galvanized
1614 Miller self retracting line Mp20g Z7/20ft falcon SLR, galvanized
1615 Miller self retracting line Mp20g Z7/20ft falcon SLR, galvanized opened box
1616 Fall Tech 9' web tie back srd twin leg qty 2 per case
1617 Fall Tech 9' web srd single leg swivel qty 3 per case sealed box
1618 Fall Tech 9' web srd single leg swivel qty 3 per case sealed box
1619 Fall Tech 9' web tie back srd twin leg qty 2 per case sealed box
1619a Fall Tech 9' web tie back srd twin leg qty 2 per case
1620 Fall Tech 9' web tie back srd single leg qty 2 per case
1621 3/4" makita impact
1622 Milwaukee orbital super Sawzall
1623 Bosch bulldog 11224vsr with case
1624 Miller mini lite fall limiter fl11-3-z7/11ft
1625 Miller mini lite fall limiter fl11-3-z7/11ft
1626 Miller mini lite fall limiter fl11-3-z7/11ft
1627 Miller mini lite fall limiter fl11-3-z7/11ft
1628 Miller mini lite fall limiter fl11-3-z7/11ft
1629 Miller mini lite fall limiter fl11-3-z7/11ft
1630 Dewalt d25263 3 mode sds d handle hammer drill will case
1631 Hilti te52 hammer drill with case
1632 Milwaukee Sawzall with case
1633 Milwaukee Sawzall with metal case
1634 Milwaukee Sawzall with case
1635 Milwaukee Sawzall with case
1636 Milwaukee Sawzall with case
1637 Milwaukee Sawzall with case
1638 Milwaukee Sawzall with case
1639 Milwaukee Sawzall with case
1640 Portable Milwaukee band saw
1641 Fall Tech fall arrest harness 74709tb8
1642 Fall Tech fall arrest harness 74709tb8
1643 Bosch hammer drill rh328vc with case
1644 Fall Tech full body harness 7073blx
1645 Fall Tech full body harness 7073blx
1646 Fall Tech full body harness 7073blx
1647 Ridgid empty case
1648 Milwaukee 2 tool empty case
1649 Makita empty reciprocating. Case only
1650 Empty Hilti tool case
1651 Empty Hilti tool case
1652 Flashlight assortment
1653 Flashlight assortment
1654 Used fall protection devices assortment 8ct
1655 Used fall protection devices 6ct
1656 Used fall protection devices 6ct
1657 Used fall protection devices 8ct
1658 Used fall protection devices 8ct
1659 Used fall protection devices 6ct
1660 Used fall protection devices 6ct
1661 Used fall protection devices 6ct
1662 Used fall protection devices assortment 6ct
1663 Used fall protection devices assortment 6ct
1664 Used fall protection devices assortment 6ct
1665 Used fall protection devices assortment 6ct
1666 Used fall protection devices assortment 6ct
1667 Used fall protection devices assortment 6ct
1668 Used fall protection devices assortment 6ct
1669 Used fall protection devices assortment 6ct
1670 Used fall protection devices assortment 6ct
1671 Used fall protection devices assortment 6ct
1672 Used fall protection devices assortment 6ct
1673 Used fall protection devices assortment 7ct
1674 Used fall protection devices assortment 7ct
1675 Used fall protection devices assortment 7ct
1676 Used fall protection devices assortment 7ct
1677 Used fall protection devices assortment 6ct
1678 Used fall protection devices assortment 6ct
1679 Used fall protection devices assortment 10ct
1680 Used fall protection devices assortment 3ct
1681 Used fall protection devices assortment 6ct
1682 Used fall protection devices assortment 7ct
1683 Used fall protection devices assortment 10ct
1684 Used fall protection devices assortment 9ct
1685 Used fall protection devices assortment 10ct
1686 Used fall protection devices assortment 5ct
1687 Used fall protection devices assortment 7ct
1688 Used fall protection devices assortment 8ct
1689 Used fall protection devices assortment 6ct
1690 Used fall protection devices assortment 8ct
1695 Screw Driver Assortment S1x1-1/2”- T30x4”
1696 Chisel and Punches Assortment
1697 1/2” Drive Assorted Sizes
1698 1/2” Drive Socket Assortment, Husky 10” Wrench, 1/2” Drive Ratchet 10”
1699 Lion Head Vise Grip 9”, Diamalloy Groove Joint Pliers 11”, 1/2” Drive Allen Ratchet 8”
1700 Wrench Assortment 5/8”-13/16”
1701 Wrench Assortment
1702 Wrench Assortment
1703 Wrench Assortment 5/8”-7/8”
1704 Wrench Assortment 15”-22”
1705 Trutest Metal Socket Tool Box 18 1/2x6”, Craftsman 3/4” Socket Assortment
1706 Wrench Assortment 5/8”-25/32”
1707 Husky 3/8” Drive S.A.E & Metric
1710 Tripod work Light 37x19”
1711 Single Work Light 13”
1712 Tripod Work Light 49x20”
1713 Voltec Tripod Work Light 36x19”
1714 Tripod Work Light 35x19”
1715 Voltec Tripod Work Light 36x19”
1716 Tripod Work Light 36x19”
1717 Trouble Light Assortment
1718 Trouble Light Assortment
1719 Trouble Light Assortment
1720 Trouble Light Assortment
1721 Trouble Light Assortment
1722 Trouble Light Assortment
1723 Trouble Light Assortment
1724 Trouble Light Assortment
1725 Trouble Light Assortment
1726 Trouble Light Assortment
1727 Trouble Light Assortment
1728 Trouble Light Assortment
1729 2- Hypot model 53216 voltage testers with accessories in rolling storage box 24”x25”x 30”
1730 Jet Chain hoist
1732 Jet Chain Hoist
1733 Victaulic adjustable Roll Groover with foot control, stand legs
1735 2 Reliance 5 Gallon Jug
1736 Copper Fire Pit with Lid 29”x9”
1737 3 Blitz Gasoline Cans 1 gal, 2 2 gal
1738 Easy Tile Utility Floor 18x18
1739 Galvanized Washable Tub 21x11 1/2”
1740 Galvanized Washable Tub Canco 52 21x11 1/2”
1741 Olympic 15 lbs, 5 lbs Weights
1742 Chapin Tree/Turf Pro Commercial Backpack Sprayer 4 Gal 61900
1743 Green Keepers Secret Premium Blended Fertilizer All Purpose 12-12-12 40lbs bag
1744 Nyjer Seed Opened bag Bird Food
1745 Green Keepers Secret Premium Blended Fertilizer All Purpose 12-12-12 40lbs bag
1746 Suncast Plastic Rolling Storage Tote 23x11”
1747 Jumper Cables, TV Metal Bracket 25”, Misc.
1750 Nuts & Bolt assortment (see photos)
1751 3” Plastic Pipe Brackets (see photos)
1752 (2) 1” CF8M Check Valves
1753 Mercer Rubber 3” Invincible Expansion Joint in box
1754 Mercer Rubber 3” Invincible Expansion Joint in box
1755 1-3/4” Senco Staples • Bell Mount Mixer-Short • 50ml Triggerbond Mixing Tips • 1/4”x3-1/2” Lag Screws ZP
1756 Senco assorted Staples (see photos)
1757 Senco Smooth Shank Framing Nails (see photos)
1758 Senco SNS40 Pneumatic Nail Gun
1759 Five - Mercer Control Rod Set 6”
1769 Seven - Clamps 19” - 41”
1770 Ashcroft Compound Gauge 0-150 PSI Silicone Filled 5”x9”
1771 1/2” Square Bevel Washers in green bin 4.25”x3”x7.25”
1772 Marson HP-2 Rivit Gun in Case 11”x2.5”x6.25”
1773 Gauge assortment including - USG & Victor
1774 Paco Pumps Inc. - Seal Pressurized
1775 Paco Pumps Inc. - Seal Pressurized
1776 Legrand Turlock Connectors • Hubbell Straight Blade Plug • Turnlok Locking Outlets • misc
1777 3/4” Zinc Finish Low Carbon Washers
1778 5/8” Square Bevel Washers in yellow bin 8.25”x7.75”x14.75” • Split Lock Washers • Hex Bolts Zinc • assorted fittings • misc
1779 Four - Large Turn Buckles 14” - 17.75”
1780 Four - Toolbox Lid Organizers 15”x1.5”x10”
1781 Grease Gun • Concrete Tool assortment
1782 Rigid Galvanized Elbows assortment - (4) 1/2” • (1) 1” • (3) 1-3/4” unthreaded • (4) 1-1/2” • (2) 2” & Die Handle Wrench
1783 Secondary Safety Restraint System
1784 Elbow 90 degree 8-1/4”
1785 (2) Ashcroft Duragauge 4-1/2”
1786 (2) Ashcroft Duragauges 4-1/2”
1787 (2) Ashcroft Duragauges 4-1/2”
1788 (3) Ashcroft Duragauges 4-1/2” & Screws
1789 Twenty - Plastic Pipe Bracket 3”
1790 Eighteen - Nibco Ball Valves 1/2”
1791 45 Elbow Socket SCH 40 10” PVC
1793 PVC Y Pipe 6”
1794 (2) Spears 6”-4” Rubber Reducer with Plug
1795 Metal Flange Elbow Reduce to 3” quick coupler
1796 Flanged Coupler 13.5”x12.5” 12-1/8” center to center hole
1797 5” Flange Gaskets
1798 2- 4” pipe Elbows
1799 4- 150-4 4” pipe Tees
1800 4” pipe Union, 4” nipple 6”
1801 Hayward TrueUnion 1” PVC, 3” 90degree Pipe Elbow
1802 H.D.Jack material Stand, adjustable height
1803 H.D. Jack material Stand, adjustable height
1810 Modine gas fired heater model PAH150SF 26”x35”x 40” condition unknown
1811 3- Attack Fume Eliminators and extra filters
1812 EMI Condensing Unit 15”x24”x36”
1813 2- Mechanic Creepers
1814 2- Mechanic Creepers
1815 2- Mechanic Creepers
1816 Pipe Reamer Assortment
1817 Pipe Reamer Assortment
1818 Greenlee 851 1/2”-4” electric PVC Bender
1819 Hot Box PVC Bender for 1/2”-4” conduit
1820 Ensley Electric PVC Bender for 1/2”-4” conduit
1821 Greenlee 851 1/2”-4” electric PVC Bender
1821a Modine gas fired heater model PAH150SF 26”x35”x 40” condition unknown
1822 Original Willard Cutter/Bender with handle on board 66”
1823 3- Greenlee 1811 Little Kickers 3/4” EMT offset benders 27”
1824 Ridgid Tristand no 40A
1825 Ridgid Tristand no 40A
1826 Ridgid Tristand no 450
1827 Ridgid Tristand with pipe vise
1828 Ridgid Tristand no 40A
1829 Ridgid Tristand no 40A
1830 Ridgid Tristand no 40A
1831 Ridgid Tristand no 40A
1832 Ridgid Tristand no 450
1833 Ridgid Tristand no 450
1834 Ridgid Tristand no 450
1835 Ridgid Tristand no 450
1836 Ridgid Tristand no 450
1837 Ridgid Tristand no 450
1838 Ridgid Tristand no 450
1839 Ridgid Tristand no 450
1840 Ridgid Tristand no 450
1841 Ridgid Tristand no 450
1842 Ridgid Tristand no 450
1843 Ridgid Tristand no 450
1844 Ridgid Tristand no 450
1845 Ridgid Tristand no 450
1846 Reed Tristand no R450
1847 Ridgid Tristand no 450
1848 Ridgid Tristand no 450
1849 Ridgid Tristand no 450
1850 Ridgid Tristand no 450
1852 2- Firestone tractor Tires 18.4 R 46
1853 5- Tire Assortment - 1- 11.2 -28 rear tire on rim
1854 10 -10.00-20 tires on rims, some tires are bad
1855 Scraper hitch 43”x18”x 102”
1856 255/65R 16 on 5 bolt rim
1857 2- Picks, hand saws, assorted tools
1858 Scrap parts
1859 Huffy Rockcreek girls bicycle, 24”
1860 Sears Sport 20-SV luggage container, broken
1861 Trailer Axle parts, 5- bolt
1862 Craftsman push mower deck rusted out motor is free & Toro Snowblower 20” motor is free
1863 Gas rolling gas tank, 5gal gas can, boat motor gas tank
1864 Lawn mower tires 2- 23 x 9.50 -12 on rims, 2- 15x6.00x6 tires on rims, miscellaneous tire
1865 Parts assortment
1866 4-Wheel wood Dolly 19”x31”, Exit light, light assortment
1867 2- Shop Vacs, condition unknown
1868 Chain link fence, van truck /trailer Door latches 116”
1869 Reel Mower 18”
1871 Seeder, rough condition
1872 Buzz Saw Frame and blade 17”
1873 Craftsman 5hp Chipper/Shredder, motor is free
1874 Metal Wheel Barrow
1875 5- Ridge Grappler LT285/75 R 17 tires
1876 Wrangler P275 60R20 tire, 8 assorted tires
GENERAL:
All items are sold AS IS, WHERE IS.
Metzger Property Services reserves the right to reopen an auction or bid if there are technical difficulties, in order to allow for fair bidding. Previous winning bids may no longer be valid in this situation.
PAYMENT TYPES & FEES:
Valid Credit Card required for bidding approval. All bidding is in US Dollars (USD). You may pay with Cash, Check, Certified Check, Credit or Debit Card with 4% convenience fee, or Wire Transfer ($25 fee added to each Wire); If you pick your winnings up at our specified time and location for the auction listed above. There is a $5 MINIMUM if you would like to pay with a Card. Any invoices paid with a card that are less than $5 Will Be Rounded Up to Meet the Minimum Requirement.
This auction will have Sales Tax added to each winning invoice. If you are Tax Exempt, please have your exemption form or the information you will need to fill one out ready at checkout! We need a new one each calendar year on file so plan accordingly.
This auction will have a 10% buyer's premium added to each winning invoice.
All titled items will have a $25 Administration Fee. It is the buyer’s responsibility to notify us if the address you registered with is different than the one you want the title mailed to. All titles are mailed signature required – no exceptions.
If You Do Not Come to The Load Out Time Listed Above, A $10 Convenience Fee Will Be Added to Your Invoice And Your Card On File Will Be Charged For Your Purchase Total Plus The 4% Convenience Fee.
If the card on file declines, a declined card fee will be added, and the buyer will be blocked until payment is received. The minimum declined card fee that is added is $5.00; If You Have More Than One Declined Invoice Within A 30 Day Period, The Declined Card Fee Will Be $50.00 Per Invoice and That Fee Must Be Paid Before Your Account Can Be Reinstated.
If Your Card Habitually Declines, Metzger Property Services Reserves the Right to Charge A $50 Fee per invoice, Even If It Is Outside The 30-Day Window. Your Balance Due Must Be $0.00 Before Your Account Will Be Reinstated.
If a buyer fails to pick up their items during the allotted time, more than 3 times in a month, Metzger Property Services reserves the right to increase the late pick up/convenience fee to a $50.00 charge per invoice.
For out of state buyers with an invoice total of $500.00 or greater, we reserve the right to ask that funds be in a certified form with either a Certified Check, Money Order or Wire Transfer ($25 fee added to each Wire). We will email you if need to pay in this manner when we send your invoice.
Refunds will not be issued for payment type changes. Please make sure the correct card is on file that you would like charged.
If a buyer has outstanding balances not taken care of, Metzger Property Services, LLC reserves the right to take legal action. Should that occur, the buyer is responsible for the invoice plus all fees associated with the legal process including but not limited to attorney’s fees, filing fees, court costs, interest and late fees.
Metzger Property Services reserves the right to ban a bidder for non-payment, non-compliance, and/or habitual issues.
PICK-UP, TRANSPORT &/OR SHIPPING:
Pickup will be the following day by appointment only! Your invoice will be emailed to you & will have pickup information and exact loadout times -- Book a pickup time slot via the link in your winning email! ** If you do not receive an email, please check your junk/spam mail! If you are unable to sign up, please call or email the Office to schedule your appointment! 260-982-0238 • info@metzgerauction.com
Buyer is required to bring their own packaging, help to load and/or equipment for loading.
Metzger Property Services reserves the right to verify orders by requiring buyer’s signature.
If you request Metzger Property Services to transport your item, there will be a minimum $20 service fee added to your invoice. We will only transport your items if feasible for us, this is not guaranteed, and you should place bids accordingly.
Items not picked up within 5 days will be resold at new owners’ expense, even if paid for. Items not paid for after 5 days will be resold. Buyer is still responsible for paying outstanding invoices before being reinstated to bid.
Shipping is available on small lots. Buyer is responsible for paying for items in full prior to being allowed to pick-up or have items shipped. Shipping costs include the cost of shipping plus up to a $10.70 S&H fee per box. Buyer is Responsible for all Shipping/Handling Charges incurred including fees charged by delivery service for incorrect addresses.
At our discretion, shippable items may go to the UPS store. This may result in higher shipping costs. The UPS Store will reach out to you directly to collect payment. Metzger’s will only collect the handling fee in this case, but you will pay UPS directly for the shipping costs. Exceptions may apply.