Stemen Road Online Auction
Previous Page Listing ID#: 1311931

Auction Location

Baltimore, OH 43105
Auction Dates and TimesSALE IS COMPLETED
Bidding Starts: Saturday Jul 10, 7:00 PM
Bidding Ends: Thursday Jul 15, 5:00 PM
Auction Type
 Online Auction 
Company Information
Rawns Auction Service

Contact: Tom Rawn
Phone: 614-833-2454
Email: rawnauctions@aol.com
Website: rawnauctions.com

GoToAuction.com ID#: 1612
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Information

ONLINE AUCTION, ONLY

190  LOTS

Stemen Road Baltimore, Ohio 43105

 

Woodworking and Shop Tools, Woods Mower, Collectibles, Lawn and       Garden Items.                                                                                                                

BID ENDING  Thurs. July 15 at 7 PM

LOADOUT – Fri July 16 at 10AM to 4 PM

 

Auction # AO   40143  

LINK -   https://bit.ly/3e2UQAg

See   www.auctionohio.com

Auction Ohio Affiliate RAWN’S AUCTION SERVICE

Auction Manager – Tom Rawn 614-580-6171

Chain Hoist

Reese Towpower 1 ton chain hoist

Hammers/Mallets

Three wood handle claw hammers, 2 wood mallets, 1 rubber mallet and one Stanley cross peen hammer

Drill Press Vise

One 6" drill press vise

Gear Puller/Oil Filter Wrench

New Britain P-150-D gear puller, oil filter wrenches, strap wrench, knives and more

Vintage Tools

Large wood handled scribe (22"), hay hook, four 2 hand wood planes. Two have handles and 2 are missing handles and more.

Wood Planes

Three hand wood planes and one Stanley Surform No. 296.

Wrenches

Assortment of combination and open end wrenches with some metric wrenches, Stanley hacksaw, Truecraft 10" adjustable wrench, screw driver and an offset flat and Phillips screwdriver.

Pliers

Assortment of locking pliers, slip joint pliers, DeWalt DWHT74426 groove joint pliers, fence pliers, Milwaukee long nose 6" locking pliers and tin snips.

Measuring Tools

Lot contains 2 compasses, 3 wood fold up rules, dial caliper, 4 tape measures and knife handle.

Vintage Planes & More

Three vintage wood planes and more.

Squares and Calipers

Assortment of 3 adjustable squares ranging from 6" to 16", one inside/outside caliper and other inside and outside calipers.

Work Lamps

Two work lights and one extension cord with multiple outlets

Forstner/Router Bits

One wood box contains router bits and the other wood box contains Forstner bits ranging in size from 5/16" to 15/16" along with four other Forstner bits with largest being 2-1/8".

Squares and Rules

Assortment of squares and rules along with a 48" T-square

Vintage Planes

Three vintage wood planes ranging in size from 9-1/4" to 18"

Router Bits

Two wood storage boxes with an assortment of router bits.

Bird House/Vintage Box

Old bird house and a vintage dovetailed wood box 15.5"w x 9.5"d x 9"h.

Clamping Squares/Straps

Four Rockler clamping squares and two rolls of load binder straps and a Bessey binder made in Germany

Stamping Kits

Four metal stamping kits. One kit is numeric the rest are alphabetical and a partial kit. All in wood storage boxes

Vintage Wood Planes

Four wood planes and an assortment of 6 extra blades

Hammers

Lot contains 2 claw hammers, 2 ball peen hammers, 1.5 lb. mallet, hatchet and a tack hammer

Vintage Lantern/Oil Can

Embury Mfg. Co. lantern with dirt and rust made in the USA and an old metal Quaker State 1 gallon can

Drill and Router Bits

Wood drill bit set missing 2 drill bits and 9 router bits

Vintage Tools

Vintage scale, grass seeder without bag, weather vane, hatchet, chisel and more.

Vintage Tools

Table mount hand crank bench grinder, belt driven grinder with old motor and a heavy 6" round weight that appears to be lead (25 lbs.?)

Tire Tools

Lug wrench and an assortment of tire bead breaker tools

Hitch Pins/Gear Puller & More

Two hitch pins, 3" gear puller and a plastic container with pipe cleaning tools.

Pry Bars/Torque Wrench

Three crow bars with the longest being 36", two 1/2" drive torque wrenches with being an Apco torque wrench, 2 Superbar pry bars, 2 ball joint removal tools and a 1.5" round magnet.

Forstner Bits

Two wood boxes that contain an assortment of Forstner bits of various diameters with the largest 2".

Screwdrivers and More

Box contains an assortment of flat, Phillips, star and hex screwdrivers

C-Clamps

Nine C-clamps that includes four 2", two 4", one heavy duty 4" and two 8".

Makita Self Feed Bits

Four Makita self feed wood boring bits ranging in size from 1-3/8" to 2-1/4" and one bit made in China

Router Bits

Wood box contains an assortment of new router bits of different shapes and sizes

Clamps

Assortment of clamps that includes 2 Bessey corner clamps made in Germany, four Bessey slide clamps and 2 Bessey double edge clamps.

Wood Chisels

Assortment of 9 small and large wood chisels and 1 corner chisel. Largest Chisel is 2" wide.

Fish Tape/Chalk Line & More

Greenlee 50' steel fish tape, chalk line and chalk, nylon string, DAP asphalt filler/sealer and a paint brush.

Socket Set/Drill bits & More

Assortment of drill bits, bit tips, carpenter pencils and 1/4" drive socket set

Scrapers/Chisels

Assortment of used scrapers and chisels.

Boring Bits/Punches

Assortment of wood boring bits that includes spade bits, drill bits, 18" masonry bit, taper punches and 1/4" Roto zip Blade

Speed Square/Metal Detector

Lot contains a speed square, Wizard metal detector, 2 caulk guns and plumb bob set.

Wood Planes

Two wood planes with one Craftsman 14" plane and a 9" plane

Files and Punches

Assortment of flat, round, half round, rasps, pin punches and a center punch and 2 Stihl chain saw blade round files.

Hole Template System

Rockler Jig It template system

Corner Clamps

Two sets of corner clamps. Large set is for 2.5" widths and small clamps are for 2.25" widths

Milk Can

Blue Valley Milk can

Electrical Wire

Box contains an assortment of different types and sizes of wire that includes 12/2, armored cable and much more

Vintage Tools

Nesco vintage oil heater, metal watering can and metal fuel can.

Clamps

Four clamps that consists of two 24" clamps, one 28" and one 60" clamp.

Shop Stool

New Pittsburgh swivel shop stool that needs to be assembled

Electric Motor

Northern 2 HP 3450 RPM 115/230 volt single phase motor new in the box

Fein Shop Vacuum

Fein Shop vacuum model 9.55.13 with hose.

Tool Kits

Assortment of 9 empty tool kit boxes that includes Milwaukee, DeWalt, Ridgid, Porter Cable and Bosch boxes.

Caster Wheels & More

Lot contains various sized caster wheels ranging in size from 2" to 4" in diameter and a set of zinc plated chest handles 4-1/4" x 5-1/4".

Tool Table

Shop Fox model D056 tool table still in the box 13" x 23" x 30.5" tall.

Vintage Transit/Tripod & More

Craftsman vintage transit in wood storage box with wood leg tripod. Transit model is 1E-13318. Also included a set of vintage wood crutches.

Router Bits

Assortment of router bits that includes a Freud wide crown moulding bit set 98-507, Freud 99-270 divided light cabinet  door, 1/2" V-groove bit, 1/2" round nose bit, Woodcraft plug and tenon cutter 1/2", recoverable bead glass door bit sets and more.

Sockets/Extensions/Ratchet

Metal HoMark tool box with an assortment of 3/8" and 1/2" drive sockets, 1/2' drive ratchet, extension and some deep sockets

Router Bit Depth Pod

Porter Cable router bit depth pod provides 12 generic router bit depth gauges that can be user's own specifications.

Pipe Wrenches/Bolt Cutter

Four pipe wrenches, one Monkey wrench and a 14" bolt cutter. Large 18" pipe wrench is a Ridgid

Clamps

Assortment of clamps include 2 orange Jorganson 3" clamps, 4 squeeze clamps, 3 corner clamps and more.

Router Bits

Assortment of CMT Untensil router bits that includes a rabbeting set, rail and style set and other router bit styles

Milwaukee Router

Milwaukee heavy duty router model 5615-29 with wrenches and a Milwaukee heavy duty router housing. Tested and runs.

Cabinet Making Set & More

CMT Sommerfield cabinet making set in wood box made in Italy, a CMT divided light door set and a CMT Grand Rabbet set.

Plate Joiner

Porter Cable plate joiner model 557 with dust collection bag, tools and handle. Tested and runs.

Stacking Clamps

Four R&R 24" stacking clamps

Caliper Stands/Oil Cans

Two magnetic caliper stands and 2 metal oil cans

Vintage Levels/Tool Guide

Three vintage wood levels that includes a Stanley 48" level, a 28" and a 24" level. Also included is a 50" grip Tru-Grip multi-purpose Clamp'N Tool Guide

Diaphragm Pump

12 volt 1.8 GPM diaphragm pump with pressure switch

Misc. Tools

Lot contains tin snips, grinding wheel resurfacing tool, Chisel, plumbing snake, misc. wrenches, hydraulic bottle jack that does not work and much more.

Wood Working Jigs

Assortment of wood working jigs and tools.

Vintage Post Vise

Vintage 4" post vise.

Work Bench

Old wood work bench is 82"w x 25"d x 32"h with 2 pullout drawer and underneath storage

Guide Adaptors/Hole Saws

Assortment of hole saws, template guide adaptors, Teknatool Nova scroll chuck, Forstner bit 4' extension50' tape measure, Veritas poly-gauge3/8" wood plug cutter, pin point router bit center tool and more.

Nut Cracker/Thermometers

Three clocks include an International Harvester clock, Credo Workshop saw blade clock and a Mastercraft saw blade workshop clock. Also included is  a nutcracker mounted on a wood block

Sharpening Stones

Lot includes an assortment of different types and styles of sharpening stones

Straight Edge

Veritas steel 36" straight edge with entire surface ground within 0.0015".

Bessy Clamps

Lot includes 2 Bessey 3" x 6" clamps, 5 Bessey 4" x 2", 1 Bessey 12" x 5-1/2" and a 16" x 7".

Routers

Two DeWalt DW610 routers both tested and run.

Tool Box/Clamps & More

Red metal tool box 15" x 6" with 2 clamps, Kreg cherry pocket-hole plugs, Kreg 1-1/4" fine self tapping pocket hole screw, Kreg #2 driver set and more.

Saw Blades/Feather-Locs

Lot includes 2 Feather-Loc  bench dogs for table saws & Router tables, Promax 8" industrial dado blades and a Craftsman 7-1/4" circular saw blade

Router

One Fein model RT-1800 3.25 HP with 1/2" collet. Missing plug on end of cord Untested and a Stanley model H 13 B router and a Porter Cable router base.

Adjustable Wrenches

Four adjustable wrenches of various sizes includes two 8" wrenches, one 15" and one 12".

Adjustable Stands

Two adjustable Crawford roller stands with maximum capacity of 250 lbs. and a Ridgid adjustable height flip top stand.

Planer

Powermatic planer Model 15 made in Taiwan. Tested and runs.

Jointer

Powermatic jointer model 54A with a roll around stand.  Tested and runs.

Bench Grinder

Thor model 5714 bench grinder with 3450 RPM 115 volts single phase on a roll around stand. Tested and runs.

Miter Saw

Bosch sliding compound miter saw model 3915 mounted on a roll around cart with a 2 drawer cabinet. Tested and runs.

Dust Collector

JET Equipment & Tools 1.5 HP dust collector model DC-1100 115 volt single phase made in Taiwan on roll around base with 4' hoses. Tested and runs.

Table Saw & Router

Table saw & router combination with some attachments and a 56"w x 27"d work surface. Saw is mounted on to a roll around cart. Tested and runs.

Shop Smith System

Shop Smith Mark V model 510 with circular saw blades and lathe accessories, feather-loc and more with manual. Tested and runs.

Drum Sander

Performax model no. 16-32 plus serial no. 1061039. Tested and runs

Cordless Drill/Sanders

Fein cordless drill model ASB14 14.4 volt with case missing battery charger, battery and oscillating tool untested, a Bosch 3727 circular sander with micro filter system and a Bosch 3727DEVS circular sander with dust collection port. Tested and runs.

Sanders

Three sanders that include a Ridgid model R2600 5" circular sander, Craftsman finishing sander and a Craftsman belt sander. All tested and run.

Misc. Items

Universal grill Electronic Igniter Kit, 4 gas regulators, soldering gun, propane torch and tank.

Drill Press

Delta model 012373 W3011 floor drill press with 1/2" chuck, 3/4 hp motor. Tested and runs.

Extension Cord

Heavy duty rubber extension cord

Scroll Saw

Delta model 40-560 scroll saw tested and runs.

Vintage Hand Saws

Four vintage carpenters saws, drywall saw, coping saws, knife saw and hacksaw.

Sanders

Milwaukee 5" orbital sander and a Craftsman corner sander model 172.116370. Tested and runs.

Router Templates

Router template sets

Precision Tools

Lot contains digital calipers, caliper case, unmarked caliper, 2 dial indicators clamp and more.

Socket Set

Metal case with a Craftsman 1/2 drive ratchet, breaker bar, extensions and sockets of various brands

Routers

Two Ridgid routers models R2400 and R2401 with a blue case with router bits

Layout Tools and More

Inside calipers, layout square, calipers, Bulls Eye center finder, wood fold up rule, drill gauges, 6" metal flexible rule, clamp and more

Vintage Key/Locks & More

Assortment of skeleton keys, vintage door knobs, old knife, hog nose ring tools and more.

Drill Bit Tips/Jig Saw Blades

Tapered drill bits, drill bit tips Fiskar round rolling knife, chain saw blade and chain saw file

Misc. Screws/Screw & Bolt Kits

Lot contains  a wood box with misc. screws, utility knife and more and three plastic containers with an assortment of screws, bolts and pan head screw

Corner Cleanout

Lot contains large assortment of nuts, bolts, flat and lock washers, lag bolts, cotter pins etc. and plastic organizers attached to wall. Buyer to remove.

Portable Stand

Small roll around stand with wood top 17.5" x 14" x 25.75".

Bar Clamps

Assortment of 12 Bessey  of bar clamps of various lengths. Longest Bessey is 60".

Bar Clamps/Quick Grips

Five bar clamps and 11 quick grips

Clay Pigeon Launder

Allen clay pigeon launcher and a box of clay pigeons

Band Saw/Blades & More

JET 18" woodworking bandsaw model JWBS-18 with 1.5 HP 115 volt motor single phase on a roller base, 3 bandsaw blades and more. Tested and runs.

Mortiser

Powermatic 1 HP 115 volt single phase mortiser. Tested and runs.

Router and table

Router with stationery router table 26.5" x 23" x 36.5"h. Tested and runs.

Bar Clamps

Three bar clamps with two 80" and a 68". One 80" is missing the clamps.

Jigsaw/Planer

Craftsman jigsaw model 315.17251 and a DeWalt model no. DW675 planer. Both tested and run.

Cordless Saw & Drill/Driver

Bosch cordless 18 volt circular saw with battery and charger and a Talon 15.6 volt drill/driver with battery and charger

Buffer/Jigsaw

Craftsman 9-5/8" buffer/polisher model 646.1069 and a Skil 1/3 HP jig saw model 4235. Tested and run.

Cordless Drills

One DeWalt DW944 3/8" VSR versa clutch drill with battery, one DeWalt DW926 3/8" adjustable clutch drill/driver, 2 DeWalt battery chargers and a Ridgid portable AM/FM radio

Dovetail Machine

Porter Cable model 7116 OMNIJIG serial number 025649 dovetail machine mounted on Woodtek stand with 2 wheels

Shear

Shear made in Taiwan

Paint Brushes and More

Assortment of paint brushes, tac cloth and sand paper.

Sanding Discs/Biscuits

Assortment of various grits of sanding discs and a variety of plate joining biscuits

Miter Saw

Sears Craftsman 10" compound miter saw model 113.234610 made in Taiwan. Tested and runs.

Belt Sander

Mead belt sander with 1/6 HP General Electric motor single phase with no sanding belt. Tested and runs.

Planer & Sander

Freud planer model LR106530 and a Sear Craftsman 1/4 HP sander model 315.116131. Sander does not run. Planer runs.

Drill/Angle Grinder

Sears Craftsman 1/2" corded drill 3/8 HP and a Sears Craftsman industrial angle grinder. Both tested and run.

Leather Punches & More

Two leather punches, tin snips, slip joint pliers, small vise grip missing a spring, Craftsman Molding Set and other miscellaneous items.

Paint Sprayer and More

Paint sprayer, nylon strapping, plastic ties, roller knife and more

Misc. Tools

Assortment of small open end wrenches, screwdrivers hex keys, drill bit gauge, scissors, file and more.

Misc. Items

Lot contains roll of caution tape, friction tape, Scotch 130C linerless rubber splicing tape, masking tape, 2 rolls of orange flagging tape, tape measure, 2 multi-meters and more.

Misc. Electric Supplies & More

Assortment of old metal electrical boxes, outlet covers, receptacles, cable staples, small gauge wire and more

Tools Boxes & Tools

The larger Homak tool box contains combination and open end wrenches up to 7/8" and drift punches. Some of the wrenches are Craftsman. The small box contains feeler gauges, nut driver, spark plug gap tool and more.

Tool Boxes

Small 6 drawer metal cabinet 8"w x 12"d x 15"h with keys and a 2 drawer 26.75"w x 12.5"d x 9.25"h cabinet with no keys

Craftsman Tool Box

Craftsman roll around tool box with 14 drawers and no keys 41.25"w x 18"d x 41"h

File Cabinet

Green 4 drawer metal file cabinet with lock and no keys  14.75"w x 24"d x 52"d.

Scrap Metal

Assortment of scrap metal, electric motor and several buckets of cabinet door track.

Cabinet Cleanout

Lot includes nails of different types and sizes, tapcons, brass screws, deck screws, wood miter box, galvanized nails, 20 drawer parts cabinet with contents and much more

Sand Paper Lot

Cabinet contains an assortment of sanding belts and rolls of sand paper of various grits, caution tape, roll of plastic and more

Jointer

Shopmaster with a 34" wide deck. Tested and runs

Wood Lot

Assortment of different types of wood for wood working

Wood Lot

Assortment of different types of wood for wood working

Wood Lot

Assortment of different types of wood for wood working located in attic of shop. There is a drop down stair access to attic but won't be available to use until 3 pm of loadout day.

Sharpening Center

Delta model 23-710 sharpening center with 1/5 HP electric motor single phase. Tested and runs.

Wood Lathe

Delta Iron Bed 1440 with tool rest, face shield and other accessories. Tested and runs.

Lathe Tool Bits

Box contains an assortment of 5 hand held lathe carving tool bits

Lathe Tool Bits

Assortment of 11 hand lathe tool carving bits.

Corner Cleanout

Corner cleanout of mostly wood, angle iron, PVC pipe and other material.

Grills

One Char Broil patio caddie charcoal grill and a Char Griller used for grilling and smoking.

Grill

Char Broil Commercial infra red grill with 2 propane tanks and Ohio State University grill cover.

Zero Turn Mower

Woods zero turn Mown'n Machine model 6200 with 1465 hours, Kohler engine and 60" mowing deck. Tested and operates.

Lawn Roller

Pull behind lawn roller 48"w x 24" diameter

Lawn Mower

Cub Cadet with 21" deck, electric start, self propelled push lawn mower.

Troy-Bilt Tiller

Troy-Bilt Horse tiller used a year ago. One tire leaks air

Troy-Bilt Tiller

Troy-Bilt Bronco with 5.5 HP Briggs & Stratton engine last used a year ago

Air Compressor

Campbell Hausfeld 5.5 HP 20 gallon air compressor with blow off nozzle and air hose. Tested and runs.

Power Post Hole Digger

Earthquake power post hole digger model 65219

Garden Seeder

Earthway Precision garden seeder model 1001-B along with various seed plates.

Battery Charger

Century battery charger model 87422.

Vintage Bicycle

Ladies vintage Huffy bicycle with metal fenders and basket and 26" x 1.75" tires.

Tail Lights & Wheels

Lot contains 5 gallon buckets, assortment of used lawn and garden type wheels, paint tray and 2 red truck tail lights.

Scrap Metal

Corner contains a variety of pipe, copper, wire, framed tubing and more

Anvil

Anvil with log base  15.5"l x 4.75"w x 9"h. May weigh 100 lbs.+

Vintage Corn Sheller

Vintage corn sheller mounted on a wood box

Propane Tanks & More

Two propane tanks, a Mr. Heater and two, Bayou Classic kettle base and a 2nd propane kettle base.

Hose Lot

Assortment of garden hoses, female hose mender, and other hose components.

Wood Lot

Assortment of wood boards and beams. Beams are 6" x 6" and 7" x 7"

Extension Cords

Three heavy duty rubber extension cords and a set of jumper cables.

Fencing Lot

Assortment of chain link fence, electric fencing in buckets, electric fence posts and more.

Air Compressor Tank

Portable air tank on cart with hose.

Ladder

Werner fiberglass 14' ladder

Vintage Tools

Smith Savage Duster with hand crank, wood surveyors tripod and an apple butter stirring stick

Vintage Tools

Fence stretcher come-a-long, corn knives, jack with rust and 3 galvanized pails. One pail is rusted out on the bottom.

Lawn Sprinkler & Pump

Wayne 1 HP lawn sprinkler & utility pump model PLS100. Tested and works

Grease Gun/Hitch & More

Lot contains a John Deere grease gun, 2000 lb. truck hitch with 2" ball, steel wedge and three old c-clamps

SMV Sign/Ratchet Straps

One SMV sign and 3 ratchet straps

Car Ramps/Creeper/Jack

Lot contains a pair of metal car ramps, a mechanics creeper and a scissors jack.

Metal Cabinets

Two 4 compartment metal storage cabinets 45"w x 15"h x 18"d.

Sprayers

Lot contains 5 hand held sprayer tanks and an assortment of extra wands.

Jeep Wheels

Four 16" tubeless steel Jeep rims with some light rust

Chain Saw/Hedge Trimmer

Craftsman 18" 42cc chain saw with Stihl blade cover. Saw has compression. Also a Black & Decker Lawn Force hedge trimmer. Tested and runs.

Weed Trimmer

Ryobi rechargeable weed trimmer with charging base. Untested.

Motor Oil/Funnels

Eleven quarts of NAPA SAE30 motor oil, 4 autolite 26 spark plugs and 2 plastic funnels.

Garden Tools

Lot includes mattocks, ax, leaf rakes post hole diggers, trench cleaning shovel, pruners snow shovel, sledge hammer, hoe and more

Shovels

Assortment of spades, flat shovels, digging shovels and potato forks

Hand Truck

Hand truck with pneumatic tires

Fencing/Posts

Two rolls of Rabbit guard fencing, 5 metal fence post and a fence post driver.

Yard Tools

Hand tree pruning saw, edger, cultivator and a hole digger.

Fence

Pieces of welded wire fence, eight 6' steel T fence posts and 8+ light metal fence posts.

Pavers

Assortment of pavers and brick

Harrow

One section spike tooth harrow with  log chain and cut off tool bar.

Lift Table

Manual hand crank shop lift with mounted table top

 

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Sponsored Links

Stemen Road Online Auction

Rawns Auction Service

Rawns Auction Service


Contact: Tom Rawn
Phone: 614-833-2454
Sale Location
Stemen Road
Baltimore, OH 43105
Sale Dates and Times
Sale Terms and Conditions

Listing Details

ONLINE AUCTION, ONLY

190  LOTS

Stemen Road Baltimore, Ohio 43105

 

Woodworking and Shop Tools, Woods Mower, Collectibles, Lawn and       Garden Items.                                                                                                                

BID ENDING  Thurs. July 15 at 7 PM

LOADOUT – Fri July 16 at 10AM to 4 PM

 

Auction # AO   40143  

LINK -   https://bit.ly/3e2UQAg

See   www.auctionohio.com

Auction Ohio Affiliate RAWN’S AUCTION SERVICE

Auction Manager – Tom Rawn 614-580-6171

Chain Hoist

Reese Towpower 1 ton chain hoist

Hammers/Mallets

Three wood handle claw hammers, 2 wood mallets, 1 rubber mallet and one Stanley cross peen hammer

Drill Press Vise

One 6" drill press vise

Gear Puller/Oil Filter Wrench

New Britain P-150-D gear puller, oil filter wrenches, strap wrench, knives and more

Vintage Tools

Large wood handled scribe (22"), hay hook, four 2 hand wood planes. Two have handles and 2 are missing handles and more.

Wood Planes

Three hand wood planes and one Stanley Surform No. 296.

Wrenches

Assortment of combination and open end wrenches with some metric wrenches, Stanley hacksaw, Truecraft 10" adjustable wrench, screw driver and an offset flat and Phillips screwdriver.

Pliers

Assortment of locking pliers, slip joint pliers, DeWalt DWHT74426 groove joint pliers, fence pliers, Milwaukee long nose 6" locking pliers and tin snips.

Measuring Tools

Lot contains 2 compasses, 3 wood fold up rules, dial caliper, 4 tape measures and knife handle.

Vintage Planes & More

Three vintage wood planes and more.

Squares and Calipers

Assortment of 3 adjustable squares ranging from 6" to 16", one inside/outside caliper and other inside and outside calipers.

Work Lamps

Two work lights and one extension cord with multiple outlets

Forstner/Router Bits

One wood box contains router bits and the other wood box contains Forstner bits ranging in size from 5/16" to 15/16" along with four other Forstner bits with largest being 2-1/8".

Squares and Rules

Assortment of squares and rules along with a 48" T-square

Vintage Planes

Three vintage wood planes ranging in size from 9-1/4" to 18"

Router Bits

Two wood storage boxes with an assortment of router bits.

Bird House/Vintage Box

Old bird house and a vintage dovetailed wood box 15.5"w x 9.5"d x 9"h.

Clamping Squares/Straps

Four Rockler clamping squares and two rolls of load binder straps and a Bessey binder made in Germany

Stamping Kits

Four metal stamping kits. One kit is numeric the rest are alphabetical and a partial kit. All in wood storage boxes

Vintage Wood Planes

Four wood planes and an assortment of 6 extra blades

Hammers

Lot contains 2 claw hammers, 2 ball peen hammers, 1.5 lb. mallet, hatchet and a tack hammer

Vintage Lantern/Oil Can

Embury Mfg. Co. lantern with dirt and rust made in the USA and an old metal Quaker State 1 gallon can

Drill and Router Bits

Wood drill bit set missing 2 drill bits and 9 router bits

Vintage Tools

Vintage scale, grass seeder without bag, weather vane, hatchet, chisel and more.

Vintage Tools

Table mount hand crank bench grinder, belt driven grinder with old motor and a heavy 6" round weight that appears to be lead (25 lbs.?)

Tire Tools

Lug wrench and an assortment of tire bead breaker tools

Hitch Pins/Gear Puller & More

Two hitch pins, 3" gear puller and a plastic container with pipe cleaning tools.

Pry Bars/Torque Wrench

Three crow bars with the longest being 36", two 1/2" drive torque wrenches with being an Apco torque wrench, 2 Superbar pry bars, 2 ball joint removal tools and a 1.5" round magnet.

Forstner Bits

Two wood boxes that contain an assortment of Forstner bits of various diameters with the largest 2".

Screwdrivers and More

Box contains an assortment of flat, Phillips, star and hex screwdrivers

C-Clamps

Nine C-clamps that includes four 2", two 4", one heavy duty 4" and two 8".

Makita Self Feed Bits

Four Makita self feed wood boring bits ranging in size from 1-3/8" to 2-1/4" and one bit made in China

Router Bits

Wood box contains an assortment of new router bits of different shapes and sizes

Clamps

Assortment of clamps that includes 2 Bessey corner clamps made in Germany, four Bessey slide clamps and 2 Bessey double edge clamps.

Wood Chisels

Assortment of 9 small and large wood chisels and 1 corner chisel. Largest Chisel is 2" wide.

Fish Tape/Chalk Line & More

Greenlee 50' steel fish tape, chalk line and chalk, nylon string, DAP asphalt filler/sealer and a paint brush.

Socket Set/Drill bits & More

Assortment of drill bits, bit tips, carpenter pencils and 1/4" drive socket set

Scrapers/Chisels

Assortment of used scrapers and chisels.

Boring Bits/Punches

Assortment of wood boring bits that includes spade bits, drill bits, 18" masonry bit, taper punches and 1/4" Roto zip Blade

Speed Square/Metal Detector

Lot contains a speed square, Wizard metal detector, 2 caulk guns and plumb bob set.

Wood Planes

Two wood planes with one Craftsman 14" plane and a 9" plane

Files and Punches

Assortment of flat, round, half round, rasps, pin punches and a center punch and 2 Stihl chain saw blade round files.

Hole Template System

Rockler Jig It template system

Corner Clamps

Two sets of corner clamps. Large set is for 2.5" widths and small clamps are for 2.25" widths

Milk Can

Blue Valley Milk can

Electrical Wire

Box contains an assortment of different types and sizes of wire that includes 12/2, armored cable and much more

Vintage Tools

Nesco vintage oil heater, metal watering can and metal fuel can.

Clamps

Four clamps that consists of two 24" clamps, one 28" and one 60" clamp.

Shop Stool

New Pittsburgh swivel shop stool that needs to be assembled

Electric Motor

Northern 2 HP 3450 RPM 115/230 volt single phase motor new in the box

Fein Shop Vacuum

Fein Shop vacuum model 9.55.13 with hose.

Tool Kits

Assortment of 9 empty tool kit boxes that includes Milwaukee, DeWalt, Ridgid, Porter Cable and Bosch boxes.

Caster Wheels & More

Lot contains various sized caster wheels ranging in size from 2" to 4" in diameter and a set of zinc plated chest handles 4-1/4" x 5-1/4".

Tool Table

Shop Fox model D056 tool table still in the box 13" x 23" x 30.5" tall.

Vintage Transit/Tripod & More

Craftsman vintage transit in wood storage box with wood leg tripod. Transit model is 1E-13318. Also included a set of vintage wood crutches.

Router Bits

Assortment of router bits that includes a Freud wide crown moulding bit set 98-507, Freud 99-270 divided light cabinet  door, 1/2" V-groove bit, 1/2" round nose bit, Woodcraft plug and tenon cutter 1/2", recoverable bead glass door bit sets and more.

Sockets/Extensions/Ratchet

Metal HoMark tool box with an assortment of 3/8" and 1/2" drive sockets, 1/2' drive ratchet, extension and some deep sockets

Router Bit Depth Pod

Porter Cable router bit depth pod provides 12 generic router bit depth gauges that can be user's own specifications.

Pipe Wrenches/Bolt Cutter

Four pipe wrenches, one Monkey wrench and a 14" bolt cutter. Large 18" pipe wrench is a Ridgid

Clamps

Assortment of clamps include 2 orange Jorganson 3" clamps, 4 squeeze clamps, 3 corner clamps and more.

Router Bits

Assortment of CMT Untensil router bits that includes a rabbeting set, rail and style set and other router bit styles

Milwaukee Router

Milwaukee heavy duty router model 5615-29 with wrenches and a Milwaukee heavy duty router housing. Tested and runs.

Cabinet Making Set & More

CMT Sommerfield cabinet making set in wood box made in Italy, a CMT divided light door set and a CMT Grand Rabbet set.

Plate Joiner

Porter Cable plate joiner model 557 with dust collection bag, tools and handle. Tested and runs.

Stacking Clamps

Four R&R 24" stacking clamps

Caliper Stands/Oil Cans

Two magnetic caliper stands and 2 metal oil cans

Vintage Levels/Tool Guide

Three vintage wood levels that includes a Stanley 48" level, a 28" and a 24" level. Also included is a 50" grip Tru-Grip multi-purpose Clamp'N Tool Guide

Diaphragm Pump

12 volt 1.8 GPM diaphragm pump with pressure switch

Misc. Tools

Lot contains tin snips, grinding wheel resurfacing tool, Chisel, plumbing snake, misc. wrenches, hydraulic bottle jack that does not work and much more.

Wood Working Jigs

Assortment of wood working jigs and tools.

Vintage Post Vise

Vintage 4" post vise.

Work Bench

Old wood work bench is 82"w x 25"d x 32"h with 2 pullout drawer and underneath storage

Guide Adaptors/Hole Saws

Assortment of hole saws, template guide adaptors, Teknatool Nova scroll chuck, Forstner bit 4' extension50' tape measure, Veritas poly-gauge3/8" wood plug cutter, pin point router bit center tool and more.

Nut Cracker/Thermometers

Three clocks include an International Harvester clock, Credo Workshop saw blade clock and a Mastercraft saw blade workshop clock. Also included is  a nutcracker mounted on a wood block

Sharpening Stones

Lot includes an assortment of different types and styles of sharpening stones

Straight Edge

Veritas steel 36" straight edge with entire surface ground within 0.0015".

Bessy Clamps

Lot includes 2 Bessey 3" x 6" clamps, 5 Bessey 4" x 2", 1 Bessey 12" x 5-1/2" and a 16" x 7".

Routers

Two DeWalt DW610 routers both tested and run.

Tool Box/Clamps & More

Red metal tool box 15" x 6" with 2 clamps, Kreg cherry pocket-hole plugs, Kreg 1-1/4" fine self tapping pocket hole screw, Kreg #2 driver set and more.

Saw Blades/Feather-Locs

Lot includes 2 Feather-Loc  bench dogs for table saws & Router tables, Promax 8" industrial dado blades and a Craftsman 7-1/4" circular saw blade

Router

One Fein model RT-1800 3.25 HP with 1/2" collet. Missing plug on end of cord Untested and a Stanley model H 13 B router and a Porter Cable router base.

Adjustable Wrenches

Four adjustable wrenches of various sizes includes two 8" wrenches, one 15" and one 12".

Adjustable Stands

Two adjustable Crawford roller stands with maximum capacity of 250 lbs. and a Ridgid adjustable height flip top stand.

Planer

Powermatic planer Model 15 made in Taiwan. Tested and runs.

Jointer

Powermatic jointer model 54A with a roll around stand.  Tested and runs.

Bench Grinder

Thor model 5714 bench grinder with 3450 RPM 115 volts single phase on a roll around stand. Tested and runs.

Miter Saw

Bosch sliding compound miter saw model 3915 mounted on a roll around cart with a 2 drawer cabinet. Tested and runs.

Dust Collector

JET Equipment & Tools 1.5 HP dust collector model DC-1100 115 volt single phase made in Taiwan on roll around base with 4' hoses. Tested and runs.

Table Saw & Router

Table saw & router combination with some attachments and a 56"w x 27"d work surface. Saw is mounted on to a roll around cart. Tested and runs.

Shop Smith System

Shop Smith Mark V model 510 with circular saw blades and lathe accessories, feather-loc and more with manual. Tested and runs.

Drum Sander

Performax model no. 16-32 plus serial no. 1061039. Tested and runs

Cordless Drill/Sanders

Fein cordless drill model ASB14 14.4 volt with case missing battery charger, battery and oscillating tool untested, a Bosch 3727 circular sander with micro filter system and a Bosch 3727DEVS circular sander with dust collection port. Tested and runs.

Sanders

Three sanders that include a Ridgid model R2600 5" circular sander, Craftsman finishing sander and a Craftsman belt sander. All tested and run.

Misc. Items

Universal grill Electronic Igniter Kit, 4 gas regulators, soldering gun, propane torch and tank.

Drill Press

Delta model 012373 W3011 floor drill press with 1/2" chuck, 3/4 hp motor. Tested and runs.

Extension Cord

Heavy duty rubber extension cord

Scroll Saw

Delta model 40-560 scroll saw tested and runs.

Vintage Hand Saws

Four vintage carpenters saws, drywall saw, coping saws, knife saw and hacksaw.

Sanders

Milwaukee 5" orbital sander and a Craftsman corner sander model 172.116370. Tested and runs.

Router Templates

Router template sets

Precision Tools

Lot contains digital calipers, caliper case, unmarked caliper, 2 dial indicators clamp and more.

Socket Set

Metal case with a Craftsman 1/2 drive ratchet, breaker bar, extensions and sockets of various brands

Routers

Two Ridgid routers models R2400 and R2401 with a blue case with router bits

Layout Tools and More

Inside calipers, layout square, calipers, Bulls Eye center finder, wood fold up rule, drill gauges, 6" metal flexible rule, clamp and more

Vintage Key/Locks & More

Assortment of skeleton keys, vintage door knobs, old knife, hog nose ring tools and more.

Drill Bit Tips/Jig Saw Blades

Tapered drill bits, drill bit tips Fiskar round rolling knife, chain saw blade and chain saw file

Misc. Screws/Screw & Bolt Kits

Lot contains  a wood box with misc. screws, utility knife and more and three plastic containers with an assortment of screws, bolts and pan head screw

Corner Cleanout

Lot contains large assortment of nuts, bolts, flat and lock washers, lag bolts, cotter pins etc. and plastic organizers attached to wall. Buyer to remove.

Portable Stand

Small roll around stand with wood top 17.5" x 14" x 25.75".

Bar Clamps

Assortment of 12 Bessey  of bar clamps of various lengths. Longest Bessey is 60".

Bar Clamps/Quick Grips

Five bar clamps and 11 quick grips

Clay Pigeon Launder

Allen clay pigeon launcher and a box of clay pigeons

Band Saw/Blades & More

JET 18" woodworking bandsaw model JWBS-18 with 1.5 HP 115 volt motor single phase on a roller base, 3 bandsaw blades and more. Tested and runs.

Mortiser

Powermatic 1 HP 115 volt single phase mortiser. Tested and runs.

Router and table

Router with stationery router table 26.5" x 23" x 36.5"h. Tested and runs.

Bar Clamps

Three bar clamps with two 80" and a 68". One 80" is missing the clamps.

Jigsaw/Planer

Craftsman jigsaw model 315.17251 and a DeWalt model no. DW675 planer. Both tested and run.

Cordless Saw & Drill/Driver

Bosch cordless 18 volt circular saw with battery and charger and a Talon 15.6 volt drill/driver with battery and charger

Buffer/Jigsaw

Craftsman 9-5/8" buffer/polisher model 646.1069 and a Skil 1/3 HP jig saw model 4235. Tested and run.

Cordless Drills

One DeWalt DW944 3/8" VSR versa clutch drill with battery, one DeWalt DW926 3/8" adjustable clutch drill/driver, 2 DeWalt battery chargers and a Ridgid portable AM/FM radio

Dovetail Machine

Porter Cable model 7116 OMNIJIG serial number 025649 dovetail machine mounted on Woodtek stand with 2 wheels

Shear

Shear made in Taiwan

Paint Brushes and More

Assortment of paint brushes, tac cloth and sand paper.

Sanding Discs/Biscuits

Assortment of various grits of sanding discs and a variety of plate joining biscuits

Miter Saw

Sears Craftsman 10" compound miter saw model 113.234610 made in Taiwan. Tested and runs.

Belt Sander

Mead belt sander with 1/6 HP General Electric motor single phase with no sanding belt. Tested and runs.

Planer & Sander

Freud planer model LR106530 and a Sear Craftsman 1/4 HP sander model 315.116131. Sander does not run. Planer runs.

Drill/Angle Grinder

Sears Craftsman 1/2" corded drill 3/8 HP and a Sears Craftsman industrial angle grinder. Both tested and run.

Leather Punches & More

Two leather punches, tin snips, slip joint pliers, small vise grip missing a spring, Craftsman Molding Set and other miscellaneous items.

Paint Sprayer and More

Paint sprayer, nylon strapping, plastic ties, roller knife and more

Misc. Tools

Assortment of small open end wrenches, screwdrivers hex keys, drill bit gauge, scissors, file and more.

Misc. Items

Lot contains roll of caution tape, friction tape, Scotch 130C linerless rubber splicing tape, masking tape, 2 rolls of orange flagging tape, tape measure, 2 multi-meters and more.

Misc. Electric Supplies & More

Assortment of old metal electrical boxes, outlet covers, receptacles, cable staples, small gauge wire and more

Tools Boxes & Tools

The larger Homak tool box contains combination and open end wrenches up to 7/8" and drift punches. Some of the wrenches are Craftsman. The small box contains feeler gauges, nut driver, spark plug gap tool and more.

Tool Boxes

Small 6 drawer metal cabinet 8"w x 12"d x 15"h with keys and a 2 drawer 26.75"w x 12.5"d x 9.25"h cabinet with no keys

Craftsman Tool Box

Craftsman roll around tool box with 14 drawers and no keys 41.25"w x 18"d x 41"h

File Cabinet

Green 4 drawer metal file cabinet with lock and no keys  14.75"w x 24"d x 52"d.

Scrap Metal

Assortment of scrap metal, electric motor and several buckets of cabinet door track.

Cabinet Cleanout

Lot includes nails of different types and sizes, tapcons, brass screws, deck screws, wood miter box, galvanized nails, 20 drawer parts cabinet with contents and much more

Sand Paper Lot

Cabinet contains an assortment of sanding belts and rolls of sand paper of various grits, caution tape, roll of plastic and more

Jointer

Shopmaster with a 34" wide deck. Tested and runs

Wood Lot

Assortment of different types of wood for wood working

Wood Lot

Assortment of different types of wood for wood working

Wood Lot

Assortment of different types of wood for wood working located in attic of shop. There is a drop down stair access to attic but won't be available to use until 3 pm of loadout day.

Sharpening Center

Delta model 23-710 sharpening center with 1/5 HP electric motor single phase. Tested and runs.

Wood Lathe

Delta Iron Bed 1440 with tool rest, face shield and other accessories. Tested and runs.

Lathe Tool Bits

Box contains an assortment of 5 hand held lathe carving tool bits

Lathe Tool Bits

Assortment of 11 hand lathe tool carving bits.

Corner Cleanout

Corner cleanout of mostly wood, angle iron, PVC pipe and other material.

Grills

One Char Broil patio caddie charcoal grill and a Char Griller used for grilling and smoking.

Grill

Char Broil Commercial infra red grill with 2 propane tanks and Ohio State University grill cover.

Zero Turn Mower

Woods zero turn Mown'n Machine model 6200 with 1465 hours, Kohler engine and 60" mowing deck. Tested and operates.

Lawn Roller

Pull behind lawn roller 48"w x 24" diameter

Lawn Mower

Cub Cadet with 21" deck, electric start, self propelled push lawn mower.

Troy-Bilt Tiller

Troy-Bilt Horse tiller used a year ago. One tire leaks air

Troy-Bilt Tiller

Troy-Bilt Bronco with 5.5 HP Briggs & Stratton engine last used a year ago

Air Compressor

Campbell Hausfeld 5.5 HP 20 gallon air compressor with blow off nozzle and air hose. Tested and runs.

Power Post Hole Digger

Earthquake power post hole digger model 65219

Garden Seeder

Earthway Precision garden seeder model 1001-B along with various seed plates.

Battery Charger

Century battery charger model 87422.

Vintage Bicycle

Ladies vintage Huffy bicycle with metal fenders and basket and 26" x 1.75" tires.

Tail Lights & Wheels

Lot contains 5 gallon buckets, assortment of used lawn and garden type wheels, paint tray and 2 red truck tail lights.

Scrap Metal

Corner contains a variety of pipe, copper, wire, framed tubing and more

Anvil

Anvil with log base  15.5"l x 4.75"w x 9"h. May weigh 100 lbs.+

Vintage Corn Sheller

Vintage corn sheller mounted on a wood box

Propane Tanks & More

Two propane tanks, a Mr. Heater and two, Bayou Classic kettle base and a 2nd propane kettle base.

Hose Lot

Assortment of garden hoses, female hose mender, and other hose components.

Wood Lot

Assortment of wood boards and beams. Beams are 6" x 6" and 7" x 7"

Extension Cords

Three heavy duty rubber extension cords and a set of jumper cables.

Fencing Lot

Assortment of chain link fence, electric fencing in buckets, electric fence posts and more.

Air Compressor Tank

Portable air tank on cart with hose.

Ladder

Werner fiberglass 14' ladder

Vintage Tools

Smith Savage Duster with hand crank, wood surveyors tripod and an apple butter stirring stick

Vintage Tools

Fence stretcher come-a-long, corn knives, jack with rust and 3 galvanized pails. One pail is rusted out on the bottom.

Lawn Sprinkler & Pump

Wayne 1 HP lawn sprinkler & utility pump model PLS100. Tested and works

Grease Gun/Hitch & More

Lot contains a John Deere grease gun, 2000 lb. truck hitch with 2" ball, steel wedge and three old c-clamps

SMV Sign/Ratchet Straps

One SMV sign and 3 ratchet straps

Car Ramps/Creeper/Jack

Lot contains a pair of metal car ramps, a mechanics creeper and a scissors jack.

Metal Cabinets

Two 4 compartment metal storage cabinets 45"w x 15"h x 18"d.

Sprayers

Lot contains 5 hand held sprayer tanks and an assortment of extra wands.

Jeep Wheels

Four 16" tubeless steel Jeep rims with some light rust

Chain Saw/Hedge Trimmer

Craftsman 18" 42cc chain saw with Stihl blade cover. Saw has compression. Also a Black & Decker Lawn Force hedge trimmer. Tested and runs.

Weed Trimmer

Ryobi rechargeable weed trimmer with charging base. Untested.

Motor Oil/Funnels

Eleven quarts of NAPA SAE30 motor oil, 4 autolite 26 spark plugs and 2 plastic funnels.

Garden Tools

Lot includes mattocks, ax, leaf rakes post hole diggers, trench cleaning shovel, pruners snow shovel, sledge hammer, hoe and more

Shovels

Assortment of spades, flat shovels, digging shovels and potato forks

Hand Truck

Hand truck with pneumatic tires

Fencing/Posts

Two rolls of Rabbit guard fencing, 5 metal fence post and a fence post driver.

Yard Tools

Hand tree pruning saw, edger, cultivator and a hole digger.

Fence

Pieces of welded wire fence, eight 6' steel T fence posts and 8+ light metal fence posts.

Pavers

Assortment of pavers and brick

Harrow

One section spike tooth harrow with  log chain and cut off tool bar.

Lift Table

Manual hand crank shop lift with mounted table top

 

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Stemen Road Online Auction
 Online Only Auction
 
Auction Date(s)
Bidding Starts: Saturday Jul 10 , 7:00 PM
Bidding Ends: Thursday Jul 15 , 5:00 PM
Auction Location

Baltimore, OH 43105
Company
Rawns Auction Service

Contact: Tom Rawn
Phone: 614-833-2454
Website: rawnauctions.com

ONLINE AUCTION, ONLY

190  LOTS

Stemen Road Baltimore, Ohio 43105

 

Woodworking and Shop Tools, Woods Mower, Collectibles, Lawn and       Garden Items.                                                                                                                

BID ENDING  Thurs. July 15 at 7 PM

LOADOUT – Fri July 16 at 10AM to 4 PM

 

Auction # AO   40143  

LINK -   https://bit.ly/3e2UQAg

See   www.auctionohio.com

Auction Ohio Affiliate RAWN’S AUCTION SERVICE

Auction Manager – Tom Rawn 614-580-6171

Chain Hoist

Reese Towpower 1 ton chain hoist

Hammers/Mallets

Three wood handle claw hammers, 2 wood mallets, 1 rubber mallet and one Stanley cross peen hammer

Drill Press Vise

One 6" drill press vise

Gear Puller/Oil Filter Wrench

New Britain P-150-D gear puller, oil filter wrenches, strap wrench, knives and more

Vintage Tools

Large wood handled scribe (22"), hay hook, four 2 hand wood planes. Two have handles and 2 are missing handles and more.

Wood Planes

Three hand wood planes and one Stanley Surform No. 296.

Wrenches

Assortment of combination and open end wrenches with some metric wrenches, Stanley hacksaw, Truecraft 10" adjustable wrench, screw driver and an offset flat and Phillips screwdriver.

Pliers

Assortment of locking pliers, slip joint pliers, DeWalt DWHT74426 groove joint pliers, fence pliers, Milwaukee long nose 6" locking pliers and tin snips.

Measuring Tools

Lot contains 2 compasses, 3 wood fold up rules, dial caliper, 4 tape measures and knife handle.

Vintage Planes & More

Three vintage wood planes and more.

Squares and Calipers

Assortment of 3 adjustable squares ranging from 6" to 16", one inside/outside caliper and other inside and outside calipers.

Work Lamps

Two work lights and one extension cord with multiple outlets

Forstner/Router Bits

One wood box contains router bits and the other wood box contains Forstner bits ranging in size from 5/16" to 15/16" along with four other Forstner bits with largest being 2-1/8".

Squares and Rules

Assortment of squares and rules along with a 48" T-square

Vintage Planes

Three vintage wood planes ranging in size from 9-1/4" to 18"

Router Bits

Two wood storage boxes with an assortment of router bits.

Bird House/Vintage Box

Old bird house and a vintage dovetailed wood box 15.5"w x 9.5"d x 9"h.

Clamping Squares/Straps

Four Rockler clamping squares and two rolls of load binder straps and a Bessey binder made in Germany

Stamping Kits

Four metal stamping kits. One kit is numeric the rest are alphabetical and a partial kit. All in wood storage boxes

Vintage Wood Planes

Four wood planes and an assortment of 6 extra blades

Hammers

Lot contains 2 claw hammers, 2 ball peen hammers, 1.5 lb. mallet, hatchet and a tack hammer

Vintage Lantern/Oil Can

Embury Mfg. Co. lantern with dirt and rust made in the USA and an old metal Quaker State 1 gallon can

Drill and Router Bits

Wood drill bit set missing 2 drill bits and 9 router bits

Vintage Tools

Vintage scale, grass seeder without bag, weather vane, hatchet, chisel and more.

Vintage Tools

Table mount hand crank bench grinder, belt driven grinder with old motor and a heavy 6" round weight that appears to be lead (25 lbs.?)

Tire Tools

Lug wrench and an assortment of tire bead breaker tools

Hitch Pins/Gear Puller & More

Two hitch pins, 3" gear puller and a plastic container with pipe cleaning tools.

Pry Bars/Torque Wrench

Three crow bars with the longest being 36", two 1/2" drive torque wrenches with being an Apco torque wrench, 2 Superbar pry bars, 2 ball joint removal tools and a 1.5" round magnet.

Forstner Bits

Two wood boxes that contain an assortment of Forstner bits of various diameters with the largest 2".

Screwdrivers and More

Box contains an assortment of flat, Phillips, star and hex screwdrivers

C-Clamps

Nine C-clamps that includes four 2", two 4", one heavy duty 4" and two 8".

Makita Self Feed Bits

Four Makita self feed wood boring bits ranging in size from 1-3/8" to 2-1/4" and one bit made in China

Router Bits

Wood box contains an assortment of new router bits of different shapes and sizes

Clamps

Assortment of clamps that includes 2 Bessey corner clamps made in Germany, four Bessey slide clamps and 2 Bessey double edge clamps.

Wood Chisels

Assortment of 9 small and large wood chisels and 1 corner chisel. Largest Chisel is 2" wide.

Fish Tape/Chalk Line & More

Greenlee 50' steel fish tape, chalk line and chalk, nylon string, DAP asphalt filler/sealer and a paint brush.

Socket Set/Drill bits & More

Assortment of drill bits, bit tips, carpenter pencils and 1/4" drive socket set

Scrapers/Chisels

Assortment of used scrapers and chisels.

Boring Bits/Punches

Assortment of wood boring bits that includes spade bits, drill bits, 18" masonry bit, taper punches and 1/4" Roto zip Blade

Speed Square/Metal Detector

Lot contains a speed square, Wizard metal detector, 2 caulk guns and plumb bob set.

Wood Planes

Two wood planes with one Craftsman 14" plane and a 9" plane

Files and Punches

Assortment of flat, round, half round, rasps, pin punches and a center punch and 2 Stihl chain saw blade round files.

Hole Template System

Rockler Jig It template system

Corner Clamps

Two sets of corner clamps. Large set is for 2.5" widths and small clamps are for 2.25" widths

Milk Can

Blue Valley Milk can

Electrical Wire

Box contains an assortment of different types and sizes of wire that includes 12/2, armored cable and much more

Vintage Tools

Nesco vintage oil heater, metal watering can and metal fuel can.

Clamps

Four clamps that consists of two 24" clamps, one 28" and one 60" clamp.

Shop Stool

New Pittsburgh swivel shop stool that needs to be assembled

Electric Motor

Northern 2 HP 3450 RPM 115/230 volt single phase motor new in the box

Fein Shop Vacuum

Fein Shop vacuum model 9.55.13 with hose.

Tool Kits

Assortment of 9 empty tool kit boxes that includes Milwaukee, DeWalt, Ridgid, Porter Cable and Bosch boxes.

Caster Wheels & More

Lot contains various sized caster wheels ranging in size from 2" to 4" in diameter and a set of zinc plated chest handles 4-1/4" x 5-1/4".

Tool Table

Shop Fox model D056 tool table still in the box 13" x 23" x 30.5" tall.

Vintage Transit/Tripod & More

Craftsman vintage transit in wood storage box with wood leg tripod. Transit model is 1E-13318. Also included a set of vintage wood crutches.

Router Bits

Assortment of router bits that includes a Freud wide crown moulding bit set 98-507, Freud 99-270 divided light cabinet  door, 1/2" V-groove bit, 1/2" round nose bit, Woodcraft plug and tenon cutter 1/2", recoverable bead glass door bit sets and more.

Sockets/Extensions/Ratchet

Metal HoMark tool box with an assortment of 3/8" and 1/2" drive sockets, 1/2' drive ratchet, extension and some deep sockets

Router Bit Depth Pod

Porter Cable router bit depth pod provides 12 generic router bit depth gauges that can be user's own specifications.

Pipe Wrenches/Bolt Cutter

Four pipe wrenches, one Monkey wrench and a 14" bolt cutter. Large 18" pipe wrench is a Ridgid

Clamps

Assortment of clamps include 2 orange Jorganson 3" clamps, 4 squeeze clamps, 3 corner clamps and more.

Router Bits

Assortment of CMT Untensil router bits that includes a rabbeting set, rail and style set and other router bit styles

Milwaukee Router

Milwaukee heavy duty router model 5615-29 with wrenches and a Milwaukee heavy duty router housing. Tested and runs.

Cabinet Making Set & More

CMT Sommerfield cabinet making set in wood box made in Italy, a CMT divided light door set and a CMT Grand Rabbet set.

Plate Joiner

Porter Cable plate joiner model 557 with dust collection bag, tools and handle. Tested and runs.

Stacking Clamps

Four R&R 24" stacking clamps

Caliper Stands/Oil Cans

Two magnetic caliper stands and 2 metal oil cans

Vintage Levels/Tool Guide

Three vintage wood levels that includes a Stanley 48" level, a 28" and a 24" level. Also included is a 50" grip Tru-Grip multi-purpose Clamp'N Tool Guide

Diaphragm Pump

12 volt 1.8 GPM diaphragm pump with pressure switch

Misc. Tools

Lot contains tin snips, grinding wheel resurfacing tool, Chisel, plumbing snake, misc. wrenches, hydraulic bottle jack that does not work and much more.

Wood Working Jigs

Assortment of wood working jigs and tools.

Vintage Post Vise

Vintage 4" post vise.

Work Bench

Old wood work bench is 82"w x 25"d x 32"h with 2 pullout drawer and underneath storage

Guide Adaptors/Hole Saws

Assortment of hole saws, template guide adaptors, Teknatool Nova scroll chuck, Forstner bit 4' extension50' tape measure, Veritas poly-gauge3/8" wood plug cutter, pin point router bit center tool and more.

Nut Cracker/Thermometers

Three clocks include an International Harvester clock, Credo Workshop saw blade clock and a Mastercraft saw blade workshop clock. Also included is  a nutcracker mounted on a wood block

Sharpening Stones

Lot includes an assortment of different types and styles of sharpening stones

Straight Edge

Veritas steel 36" straight edge with entire surface ground within 0.0015".

Bessy Clamps

Lot includes 2 Bessey 3" x 6" clamps, 5 Bessey 4" x 2", 1 Bessey 12" x 5-1/2" and a 16" x 7".

Routers

Two DeWalt DW610 routers both tested and run.

Tool Box/Clamps & More

Red metal tool box 15" x 6" with 2 clamps, Kreg cherry pocket-hole plugs, Kreg 1-1/4" fine self tapping pocket hole screw, Kreg #2 driver set and more.

Saw Blades/Feather-Locs

Lot includes 2 Feather-Loc  bench dogs for table saws & Router tables, Promax 8" industrial dado blades and a Craftsman 7-1/4" circular saw blade

Router

One Fein model RT-1800 3.25 HP with 1/2" collet. Missing plug on end of cord Untested and a Stanley model H 13 B router and a Porter Cable router base.

Adjustable Wrenches

Four adjustable wrenches of various sizes includes two 8" wrenches, one 15" and one 12".

Adjustable Stands

Two adjustable Crawford roller stands with maximum capacity of 250 lbs. and a Ridgid adjustable height flip top stand.

Planer

Powermatic planer Model 15 made in Taiwan. Tested and runs.

Jointer

Powermatic jointer model 54A with a roll around stand.  Tested and runs.

Bench Grinder

Thor model 5714 bench grinder with 3450 RPM 115 volts single phase on a roll around stand. Tested and runs.

Miter Saw

Bosch sliding compound miter saw model 3915 mounted on a roll around cart with a 2 drawer cabinet. Tested and runs.

Dust Collector

JET Equipment & Tools 1.5 HP dust collector model DC-1100 115 volt single phase made in Taiwan on roll around base with 4' hoses. Tested and runs.

Table Saw & Router

Table saw & router combination with some attachments and a 56"w x 27"d work surface. Saw is mounted on to a roll around cart. Tested and runs.

Shop Smith System

Shop Smith Mark V model 510 with circular saw blades and lathe accessories, feather-loc and more with manual. Tested and runs.

Drum Sander

Performax model no. 16-32 plus serial no. 1061039. Tested and runs

Cordless Drill/Sanders

Fein cordless drill model ASB14 14.4 volt with case missing battery charger, battery and oscillating tool untested, a Bosch 3727 circular sander with micro filter system and a Bosch 3727DEVS circular sander with dust collection port. Tested and runs.

Sanders

Three sanders that include a Ridgid model R2600 5" circular sander, Craftsman finishing sander and a Craftsman belt sander. All tested and run.

Misc. Items

Universal grill Electronic Igniter Kit, 4 gas regulators, soldering gun, propane torch and tank.

Drill Press

Delta model 012373 W3011 floor drill press with 1/2" chuck, 3/4 hp motor. Tested and runs.

Extension Cord

Heavy duty rubber extension cord

Scroll Saw

Delta model 40-560 scroll saw tested and runs.

Vintage Hand Saws

Four vintage carpenters saws, drywall saw, coping saws, knife saw and hacksaw.

Sanders

Milwaukee 5" orbital sander and a Craftsman corner sander model 172.116370. Tested and runs.

Router Templates

Router template sets

Precision Tools

Lot contains digital calipers, caliper case, unmarked caliper, 2 dial indicators clamp and more.

Socket Set

Metal case with a Craftsman 1/2 drive ratchet, breaker bar, extensions and sockets of various brands

Routers

Two Ridgid routers models R2400 and R2401 with a blue case with router bits

Layout Tools and More

Inside calipers, layout square, calipers, Bulls Eye center finder, wood fold up rule, drill gauges, 6" metal flexible rule, clamp and more

Vintage Key/Locks & More

Assortment of skeleton keys, vintage door knobs, old knife, hog nose ring tools and more.

Drill Bit Tips/Jig Saw Blades

Tapered drill bits, drill bit tips Fiskar round rolling knife, chain saw blade and chain saw file

Misc. Screws/Screw & Bolt Kits

Lot contains  a wood box with misc. screws, utility knife and more and three plastic containers with an assortment of screws, bolts and pan head screw

Corner Cleanout

Lot contains large assortment of nuts, bolts, flat and lock washers, lag bolts, cotter pins etc. and plastic organizers attached to wall. Buyer to remove.

Portable Stand

Small roll around stand with wood top 17.5" x 14" x 25.75".

Bar Clamps

Assortment of 12 Bessey  of bar clamps of various lengths. Longest Bessey is 60".

Bar Clamps/Quick Grips

Five bar clamps and 11 quick grips

Clay Pigeon Launder

Allen clay pigeon launcher and a box of clay pigeons

Band Saw/Blades & More

JET 18" woodworking bandsaw model JWBS-18 with 1.5 HP 115 volt motor single phase on a roller base, 3 bandsaw blades and more. Tested and runs.

Mortiser

Powermatic 1 HP 115 volt single phase mortiser. Tested and runs.

Router and table

Router with stationery router table 26.5" x 23" x 36.5"h. Tested and runs.

Bar Clamps

Three bar clamps with two 80" and a 68". One 80" is missing the clamps.

Jigsaw/Planer

Craftsman jigsaw model 315.17251 and a DeWalt model no. DW675 planer. Both tested and run.

Cordless Saw & Drill/Driver

Bosch cordless 18 volt circular saw with battery and charger and a Talon 15.6 volt drill/driver with battery and charger

Buffer/Jigsaw

Craftsman 9-5/8" buffer/polisher model 646.1069 and a Skil 1/3 HP jig saw model 4235. Tested and run.

Cordless Drills

One DeWalt DW944 3/8" VSR versa clutch drill with battery, one DeWalt DW926 3/8" adjustable clutch drill/driver, 2 DeWalt battery chargers and a Ridgid portable AM/FM radio

Dovetail Machine

Porter Cable model 7116 OMNIJIG serial number 025649 dovetail machine mounted on Woodtek stand with 2 wheels

Shear

Shear made in Taiwan

Paint Brushes and More

Assortment of paint brushes, tac cloth and sand paper.

Sanding Discs/Biscuits

Assortment of various grits of sanding discs and a variety of plate joining biscuits

Miter Saw

Sears Craftsman 10" compound miter saw model 113.234610 made in Taiwan. Tested and runs.

Belt Sander

Mead belt sander with 1/6 HP General Electric motor single phase with no sanding belt. Tested and runs.

Planer & Sander

Freud planer model LR106530 and a Sear Craftsman 1/4 HP sander model 315.116131. Sander does not run. Planer runs.

Drill/Angle Grinder

Sears Craftsman 1/2" corded drill 3/8 HP and a Sears Craftsman industrial angle grinder. Both tested and run.

Leather Punches & More

Two leather punches, tin snips, slip joint pliers, small vise grip missing a spring, Craftsman Molding Set and other miscellaneous items.

Paint Sprayer and More

Paint sprayer, nylon strapping, plastic ties, roller knife and more

Misc. Tools

Assortment of small open end wrenches, screwdrivers hex keys, drill bit gauge, scissors, file and more.

Misc. Items

Lot contains roll of caution tape, friction tape, Scotch 130C linerless rubber splicing tape, masking tape, 2 rolls of orange flagging tape, tape measure, 2 multi-meters and more.

Misc. Electric Supplies & More

Assortment of old metal electrical boxes, outlet covers, receptacles, cable staples, small gauge wire and more

Tools Boxes & Tools

The larger Homak tool box contains combination and open end wrenches up to 7/8" and drift punches. Some of the wrenches are Craftsman. The small box contains feeler gauges, nut driver, spark plug gap tool and more.

Tool Boxes

Small 6 drawer metal cabinet 8"w x 12"d x 15"h with keys and a 2 drawer 26.75"w x 12.5"d x 9.25"h cabinet with no keys

Craftsman Tool Box

Craftsman roll around tool box with 14 drawers and no keys 41.25"w x 18"d x 41"h

File Cabinet

Green 4 drawer metal file cabinet with lock and no keys  14.75"w x 24"d x 52"d.

Scrap Metal

Assortment of scrap metal, electric motor and several buckets of cabinet door track.

Cabinet Cleanout

Lot includes nails of different types and sizes, tapcons, brass screws, deck screws, wood miter box, galvanized nails, 20 drawer parts cabinet with contents and much more

Sand Paper Lot

Cabinet contains an assortment of sanding belts and rolls of sand paper of various grits, caution tape, roll of plastic and more

Jointer

Shopmaster with a 34" wide deck. Tested and runs

Wood Lot

Assortment of different types of wood for wood working

Wood Lot

Assortment of different types of wood for wood working

Wood Lot

Assortment of different types of wood for wood working located in attic of shop. There is a drop down stair access to attic but won't be available to use until 3 pm of loadout day.

Sharpening Center

Delta model 23-710 sharpening center with 1/5 HP electric motor single phase. Tested and runs.

Wood Lathe

Delta Iron Bed 1440 with tool rest, face shield and other accessories. Tested and runs.

Lathe Tool Bits

Box contains an assortment of 5 hand held lathe carving tool bits

Lathe Tool Bits

Assortment of 11 hand lathe tool carving bits.

Corner Cleanout

Corner cleanout of mostly wood, angle iron, PVC pipe and other material.

Grills

One Char Broil patio caddie charcoal grill and a Char Griller used for grilling and smoking.

Grill

Char Broil Commercial infra red grill with 2 propane tanks and Ohio State University grill cover.

Zero Turn Mower

Woods zero turn Mown'n Machine model 6200 with 1465 hours, Kohler engine and 60" mowing deck. Tested and operates.

Lawn Roller

Pull behind lawn roller 48"w x 24" diameter

Lawn Mower

Cub Cadet with 21" deck, electric start, self propelled push lawn mower.

Troy-Bilt Tiller

Troy-Bilt Horse tiller used a year ago. One tire leaks air

Troy-Bilt Tiller

Troy-Bilt Bronco with 5.5 HP Briggs & Stratton engine last used a year ago

Air Compressor

Campbell Hausfeld 5.5 HP 20 gallon air compressor with blow off nozzle and air hose. Tested and runs.

Power Post Hole Digger

Earthquake power post hole digger model 65219

Garden Seeder

Earthway Precision garden seeder model 1001-B along with various seed plates.

Battery Charger

Century battery charger model 87422.

Vintage Bicycle

Ladies vintage Huffy bicycle with metal fenders and basket and 26" x 1.75" tires.

Tail Lights & Wheels

Lot contains 5 gallon buckets, assortment of used lawn and garden type wheels, paint tray and 2 red truck tail lights.

Scrap Metal

Corner contains a variety of pipe, copper, wire, framed tubing and more

Anvil

Anvil with log base  15.5"l x 4.75"w x 9"h. May weigh 100 lbs.+

Vintage Corn Sheller

Vintage corn sheller mounted on a wood box

Propane Tanks & More

Two propane tanks, a Mr. Heater and two, Bayou Classic kettle base and a 2nd propane kettle base.

Hose Lot

Assortment of garden hoses, female hose mender, and other hose components.

Wood Lot

Assortment of wood boards and beams. Beams are 6" x 6" and 7" x 7"

Extension Cords

Three heavy duty rubber extension cords and a set of jumper cables.

Fencing Lot

Assortment of chain link fence, electric fencing in buckets, electric fence posts and more.

Air Compressor Tank

Portable air tank on cart with hose.

Ladder

Werner fiberglass 14' ladder

Vintage Tools

Smith Savage Duster with hand crank, wood surveyors tripod and an apple butter stirring stick

Vintage Tools

Fence stretcher come-a-long, corn knives, jack with rust and 3 galvanized pails. One pail is rusted out on the bottom.

Lawn Sprinkler & Pump

Wayne 1 HP lawn sprinkler & utility pump model PLS100. Tested and works

Grease Gun/Hitch & More

Lot contains a John Deere grease gun, 2000 lb. truck hitch with 2" ball, steel wedge and three old c-clamps

SMV Sign/Ratchet Straps

One SMV sign and 3 ratchet straps

Car Ramps/Creeper/Jack

Lot contains a pair of metal car ramps, a mechanics creeper and a scissors jack.

Metal Cabinets

Two 4 compartment metal storage cabinets 45"w x 15"h x 18"d.

Sprayers

Lot contains 5 hand held sprayer tanks and an assortment of extra wands.

Jeep Wheels

Four 16" tubeless steel Jeep rims with some light rust

Chain Saw/Hedge Trimmer

Craftsman 18" 42cc chain saw with Stihl blade cover. Saw has compression. Also a Black & Decker Lawn Force hedge trimmer. Tested and runs.

Weed Trimmer

Ryobi rechargeable weed trimmer with charging base. Untested.

Motor Oil/Funnels

Eleven quarts of NAPA SAE30 motor oil, 4 autolite 26 spark plugs and 2 plastic funnels.

Garden Tools

Lot includes mattocks, ax, leaf rakes post hole diggers, trench cleaning shovel, pruners snow shovel, sledge hammer, hoe and more

Shovels

Assortment of spades, flat shovels, digging shovels and potato forks

Hand Truck

Hand truck with pneumatic tires

Fencing/Posts

Two rolls of Rabbit guard fencing, 5 metal fence post and a fence post driver.

Yard Tools

Hand tree pruning saw, edger, cultivator and a hole digger.

Fence

Pieces of welded wire fence, eight 6' steel T fence posts and 8+ light metal fence posts.

Pavers

Assortment of pavers and brick

Harrow

One section spike tooth harrow with  log chain and cut off tool bar.

Lift Table

Manual hand crank shop lift with mounted table top