Mark Manufacturing
Previous Page Listing ID#: 47550

Auction Location

Buffalo, NY 14207
Auction Dates and TimesSALE IS COMPLETED
Wednesday Sep 6, 2017 Completed
Auction Type
 Live Auction  VIEW ONLINE CATALOG
Company Information
Blackbird Asset Services, LLC

Website: blackbirdauctions.com

GoToAuction.com ID#: 3317
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Auction Bidder Agreement Bidder and Auctioneer agree that the Terms and Conditions listed below shall govern this Auction sale: 1. All persons seeking to register to bid acknowledges acceptance of these terms of sale, and guarantees prompt payment of all purchases by wire transfer, credit card or company check with bank letter of guarantee. No items will be removed prior to full payment, with all funds having cleared our accounts. 2. The "Bidder" becomes a "Buyer" upon the Auctioneers acceptance of their bid on one or more items in the Auction sale. 3. FULL PAYENT must be made immediately for your purchase at the Auction. This payment should be made in the form of cash, credit card (up to $5,000), company check with bank letter, cashiers check, or wire transfer (wire instructions on request). 4. Items left unpaid for more than 48 hours will be resold at the risk and expense of the Buyer. In the event that a Buyer fails to pay the entire purchase price (in addition to the Buyer's premium and any applicable tax) within 48 hours or otherwise fails to comply with these Terms and Conditions, Auctioneer and the Seller may retain any deposit paid as liquidated damages without notice. Auctioneer and the Seller reserve the right to resell such items without notice, and the defaulting Buyer shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling such items. 5. Auctioneer shall charge and collect from each Buyer a 15% Buyer's premium for each sale at the Auction, in addition to the purchase price as bid. Buyers that utilize our Webcast service shall be charged a buyer's premium of 18% for each sale at the Auction, in addition to the purchaser price. Buyers that pay by credit card will be charged a 3% convenience/credit card fee in addition to any buyers premiums so noted. 6. All items in the Auction shall be sold to the highest bidder; provided, however, that some items may be auctioned with minimum reserve prices, and/or subject to Seller's right of confirmation. Auctioneer reserves the right to reject any bid that is only a minimal increase over the preceding bid, that is not commensurate with the value of the item being offered, or any bid that Auctioneer believes was made illegally or in bad faith. Further, Auctioneer may bid at the Auction either for its own account or on behalf of the Seller or a third party. All sales are final. No returns or refunds will be permitted, unless authorized by the Seller in writing. 7. Collection of applicable taxes will be in accordance with the laws of New York. Auctioneer reserves the right to charge and collect tax on all purchases, shifting the burden of determining any 'tax exempt' status to the purchaser (if applicable). In such case tax refunds will be issued by the respective state. Sales tax for Erie County, NY is 8.75%. 8. For any purchase paid in cash with a value of $10,000 or greater, Buyer is required to complete US Treasury Dept. form #8300 at the time of purchase. 9. Removal and shipment of purchased items will be the sole responsibility of the Buyer. Removal for smalls and hand carry items will be immediately following the sale then Thursday, September 7 through Saturday September 9. Riggers scheduled thereafter by appointment. All purchases must be removed no later than September 16. Riggers are encouraged to review the PDF catalog and submit insurance certificates in advance of the auction. NO MATERIAL HANDLING EQUIPMENT OR TOOLS WILL BE MADE AVAILABLE BY THE SELLER OR AUCTIONEER FOR BUYERS' USE DURING ITEM REMOVAL. All Buyers and/or their agent riggers MUST comply with all insurance requirements as noted in the Auction catalog. 10. The Buyer becomes fully responsible for, and assumes all risk of loss and damage to items immediately upon acceptance of their bid. It shall be the responsibility of the Buyer to insure their purchases immediately. If the Buyer does not remove an item within the announced removal period, Auctioneer and the Seller may, in their sole discretion, deem the item to have been abandoned by the Buyer and the Buyer will have no further rights with respect to the item. 11. In the event of any dispute concerning the winning bid price for an item, the record kept by Auctioneer shall control. In any dispute between two or more bidders, the Auctioneers decision shall be absolute and final. 12. ALL ITEMS ARE SOLD AS IS, WHERE IS AND WITH ALL FAULTS. NEITHER SELLER NOR AUCTIONEER MAKES ANY WARRANTY, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY, VALUE OR CONDITION OF ANY ITEM. AUCTIONEER AND SELLER EXPRESSLY DISCLAIM ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT. 13. No sale shall be invalidated by reason of any defect or inaccuracy in any description or listing, and no liability shall be borne by the Auctioneer with respect to such errors. All information has been obtained from sources generally believed to be reliable, but the accuracy cannot be guaranteed or warranted by the Auctioneer. Bidder acknowledges it is their responsibility to inspect all items and to make their own inquires whether purchasing online via Webcast or live on site. 14. The aggregate respective liability of Seller or Auctioneer in respect of any other loss or damage suffered by a Buyer and arising out of or in connection with these Terms and Conditions or arising out of or in any way connected with a Buyer's participation in the Auction, whether in contract, tort (including negligence) or for breach of statutory duty or in any other way, shall not exceed (i) in the case of the Seller, the amount of the purchase price paid by the Buyer; and (ii) in the case of the Auctioneer, the Buyer's premium paid by the Buyer, in each case in respect of the goods which are the subject of the claim. 15. Computers, drives and other electronic equipment may contain copywritten software that is governed by a license agreement issued to a third party. In such event the Buyer acknowledges that said software and license agreement(s) are not included in their purchase(s). Buyer guarantees the destruction of any personally identifiable information that may be stored on such devices, and shall indemnify and hold harmless the Auction Company and their Seller from any claims, suits or other actions brought against them that relates in any way to personally identifiable information or any other data that remains on such devices, latent or obvious. 16. Buyers acknowledge that an Auction site or the Seller's site is a potentially dangerous place. Flammable, noxious, corrosive and pressurized substances may be present. Heavy equipment may be operated, and electrical circuits may be live. Every person enters such site at his or her own risk with notice of the condition of the premises and the activities that will be or have been conducted on the premises. Buyers shall so advise their agents and employees. No person shall have any claim against Auctioneer, the Seller or their respective agents or employees for any injuries sustained or for damages to or loss of person or property that may occur at such site. 17. These Terms and Conditions are incorporated and merged with any sale specific Terms and Conditions that may be distributed via our online bidding site and or at the physical auction location.
Listing Information
Due to the untimely passing of the owner, we will sell the entire contents of Mark Manufacturing, Inc. located at 80 Skillen Street in Buffalo, NY (Between Military Road and Ontario Street). Sale to include CNC equipment, manual machines, tooling, fixtures, inspection, forklift, and much more. HIGHLIGHTS OF AUCTION INCLUDE: Mazak Quick Turn 35N CNC turning center Mazak Quick Turn 10N CNC turning center Hitachi Seiki HiTec-Turn 23S-III CNC turning center Daewoo Puma 8 CNC turning center Mazak VQC 20/40 CNC vertical machining center Bridgeport 1 1/2 HP vertical milling machine Cosen horizontal band saw Komatsu FG25 LP 4500# forklift 1970 Camaro project car and much more

1
Radial Arm Saw
Ryobi RA-200 8 1/4" radial arm saw with mobile stand

2
2 die grinders
Cooper Power Tools Dotco die grinder model 12L12-36 and pneumatic die grinder with DISC-IT

3
Ramset trigger tool
Ramset trigger shot tool

4
Craftsman bench grinder
Craftsman professional 8" bench grinder with steel stand, with drawers

5
Mini drill press
5-speed mini drill press

6
Craftsman portable table saw
Craftsman 8" direct drive portable table saw

7
New air hoses
Lot- (2) NEW 3/8" x 25' air hose and (1) 1/4" x 25' NEW air hose with new blow guns and fittings

8
Delta Shopmaster Sander
Delta Shopmaster model SA180, 1" belt and 8" disc sander

9
B&D grinders
Lot- Black & Decker 5" bench grinder, Black & Decker 6" sander-polisher and Power House 1/4" corded drill

10
Sioux and pneumatic grinders
Lot- Sioux model 5978A pneumatic pencil die grinder and pneumatic die grinder with tools

11
Dremel Moto-Tool
Dremel Moto-Tool model 270 with Dremel model 290 engraver

12
Lot of gear pullers
Lot- (1) OTC 3" jaw gear puller and (1) 7" jaw gear puller

13
Lot of Emery paper, rolls, wheels…
Lot- Emery sand paper, Emery commutator rolls, grinding wheels, grinding disc and wire wheel brushes

14
Snake, shelving and lights
Lot- 50 foot 1/2" snake and 4 shelf shelving and work lights

15
OPEN
OPEN

16
Bearings and grease gun
Box of bearings and grease gun

17
B&D drill
Black & Decker corded drill/driver

18
B&D corded saw
Black & Decker model JS620G corded JIG saw

19
Dewalt corded drill
Dewalt model DWD110 3/8" VSR corded drill

20
Cummins socket set
Cummins 21 PC 3/4" drive socket set with case

21
Stamps
Lot- numeric and alphabet metal stamps

22
"C" clamps
Lot- (7) Made in USA "C" clamps

23
Jorgensen clamps
Lot- (2) Jorgensen 18" bar clamps and (1) Jorgensen 12" bar clamp, (2) Vise grip 11R welding clamps and vise grip 10CR vise grip

24
Prest-O-Lite torch and regulator lot
Lot- Prest-O-Lite acetylene plumbing torch and regulator, Victor cutting torch with welding tips

25
Blow torch
Blow torch

26
B&D and Florida wrench and sander
Lot- Black & Decker pneumatic impact wrench, Florida pneumatic DA sander, Binks model 18 spray gun

27
Hand pads
Lot- (2) boxes of Scotch-Brite model 7447 hand pads, Brite Star maroon model 447 hand pads, (20) maroon 8" buff discs and (5) blue 8" buff discs

28
Tool box and tools
Tool box with tools

29
Tool box and tools
Tool box with tools

30
McCulloch Mite-E-Lite
McCulloch Mite-E-Lite portable generator model RA120, 1200 watts

31
Sandy Jet sand blaster and tank
Lot- Sandy Jet sand blaster and Midwest Products portable air tank

32
Green workbench
90" x 34" high wood and steel green workbench

33
Drills, taps, cutters…
Lot- Boxes of drills, taps, cutters, files and reamers on floor

34
Chainfalls
Lot- CM 3 ton chainfall, Duracraft 1 ton chainfall and 18' of tow chain

35
Bear Paw magnet
Bear Paw cub model magnet

36
Steel cart and vise
31" x 20" x 36.5" steel mobile cart with 4 drawers and Made in USA 3" bench vise

37
Torx and Allen wrenches
Lot- Torx and Allen standard and metric wrenches

38
Craftsman toolbox and tools
Craftsman 27" x 19" x 53" top and bottom tool box filled with tools

39
Craftsman toolbox and tools
Craftsman tool box with tools

40
Steel toolbox and tools
Steel tool box with tools

41
Mobile steel cart
Mobile steel cart

42
Taper drill bits
(2) boxes of USA made taper drill bits

43
Reamers
Lot- Alvord-Polk tool company reamers, 21/32" to 1 1/4"

44
Chargers
Lot- (2) die hard model 200.71222 12 volt battery chargers

45
Mitutoyo and Starrett Micrometers
Lot- (10) Mitutoyo and Starrett micrometers, 1"-7"

46
Micrometers
Lot - (3) micrometers, 0-1" to 2"-3"

47
Starrett micrometers
Lot- (3) Starrett model 449, 440 and 449 depth micrometers

48
Fowler depth gauge
Fowler dial depth gauge

49
Micrometers
Lot- Miscellaneous micrometers

50
Fowler bore gauge
Fowler 1.4" to 6" cylinder bore gauge

51
Fowler bore gauge
Fowler 1.4" to 6" cylinder bore gauge

52
Fowler bore gauge
Fowler 1.4" to 6" cylinder bore gauge

53
Fowler cylinder bore gauge and parts
Fowler 1.4" to 6" cylinder bore gauge with miscellaneous parts

54
Mitutoyo bore gauge
Mitutoyo .7"-1.4" bore gauge

55
Fowler gauge parts
Lot- Miscellaneous Fowler bore gauge parts

56
Bore gauges
Lot- Bore gauges (MHC), .24"-4" MHC depth gauge

57
Shars caliper
Shars 40" vernier long jaw caliper with case

58
Vernier caliper
24" vernier caliper with case

59
Starrett and Alfred Emerson calipers
Lot- Starrett model 196 indicator, Alfred Emerson level and angle finder, Brown & Sharpe model 577-7" vernier caliper

60
Fowler and Mitutoyo calipers
Lot- Fowler 12" vernier dial caliper indicator, Mitutoyo 8" vernier caliper, and 8" vernier caliper

61
Miscellaneous calipers
Lot- 8 miscellaneous calipers

62
Miscellaneous calipers and tools
Lot- Miscellaneous calipers and measuring tools

63
Pin gauges and blocks
Lot- (5) cases of pin gauges, gauge blocks and parallels

64
Edsal cart
28" x 20" x 32" Edsal mobile steel cart

65
Starrett and GEM indicators
Lot- Starrett and GEM last word indicators

66
Plug and small hole gauges
Lot- Miscellaneous plug gauges, small hole gauges and thread measuring wire sets

67
Shim material
Box of shim material

68
Starrett 657-1 MAG base and holder
NEW Starrett model 657-1 MAG base with holder and Starrett model 657 MAG base

69
Height gauge
12" height gauge

70
MAG bases, holders and indicators
Lot- (2) MAG bases, holders and indicators

71
Indicator bases
Lot- Miscellaneous indicator bases

72
5 MAG bases and holders
Lot- Miscellaneous 5 MAG bases and holders

73
Indicators
Box of miscellaneous indicators

74
Steel cabinet
36" x 24" x 35"H steel cabinet with 2 doors and shelves

75
Steel cabinet
36" x 24" x 35"H steel cabinet with 2 doors and shelves

76
3 indicator holders and indicators
Lot- (3) granite base indicator holders with 2 dial indicators

77
Starrett
Lot- Starrett model 599 planer and sharper gauge, Lufkin model 901A planer and sharper gauge, with 2 sines

78
599 planer and sharper gauge
Pair on "V" blocks, 6"

79
Plates and blocks with holes
Miscellaneous angle plates and blocks with holes

80
Granite surface plates
Lot- (3) granite surface plates- (2) 12 1/4" x 9" x 3 1/8", (1) 18 1/4" x 12 1/4" x 3 1/8"

81
Granite surface plates
24 1/8" x 18 3/16" x 3 1/8" granite surface plate with stand (25" x 19" x 36.5")

82
OPEN
Lots 82-84 are OPEN

85
Mazak Quickturn 35N CNC center
Mazak Quickturn 35N CNC turning center (Model QT 35N univ, SN 113583), 30HP, 3 gear ranges, 24 position turret, Mazatrol + plus CNC control, 12" 3 jaw chuck, 2 3/4" thru spindle (recent spindle motor rebuilding), 230/240 volt, 20" max swing x 40", Ma...

86
Mazak Quickturn CNC center 10N
Mazak Quickturn 10N CNC turning center (SN 64494), 1 gear range, 8 tool holders, Mazatrol CAM T-2 control, 8 position turret, 1 3/4" thru spindle, 18" max swing x 24

87
Daewoo Puma 8 CNC center
Daewoo Puma 8 CNC turning center (SN 370429), 220V, 3PH, Fanuc 10t-F control, 6 position turret, 1 1/2" thru spindle, 18" max swing x 24", Jorgensen chip conveyor (SN A891100-7), 1989

88
Hitachi Seiki Hitec-turn 23S II
Hitachi Seiki Hitec-turn 23S II CNC turning center (SN HTS 3013 HL), 220/ 3 phase, Seicos L multi control, 10 position turret, 10" 3-jaw chuck, 3" thru-spindle, 18" max swing x 30", Mayfran chip-tote chip conveyor (SN 96M3891)

89
Boring bars, holders
Lot- A lot of boring bars, tool holders in bottom of shelving

90
Drills and tooling
Drills and tooling in top shelving

91
Chuck jaws on shelf
Lot- Chuck jaws on shelf

92
Chuck jaws on shelf
Lot- Chuck jaws on shelf

93
Chuck jaws on shelf
Lot- Chuck jaws on shelf

94
Tool holders, tooling, oil skimmer
Lot- Tool holders, tooling and leeves, coolant oil skimmer on bottom shelf

95
Shelving
Lot- (2) shelving units

96
Pie jaws
Shelf of pie jaws

97
Jaws on shelf
Lot- Jaws on shelf

98
Jaws on shelf
Lot- Jaws on shelf

99
Jaws on shelf
Lot- Jaws on shelf

100
Mazak VQC CNC center
Mazak VQC 20/40B CNC machining center (SN 59863), X=40", Y=20", Z=18", Mazatrol CAM M-2 control, 22 x 49 t-slot table, CAT 40 taper, 30 position ATC, 1985

101
LNS hydrobar THB32-3.7
LNS hydrobar bar feeder model THB32-3.7 (SN 10.495), 18' with stand

102
Cabinet and tooling
Cabinet and tooling

103
Bridgeport 1 1/2 HP mill
Bridgeport 1 1/2 HP vertical milling machine, 9" x 42" servo feed T-slotted table, 230V 3PH, SN156186 (1973)

104
Shelving and contents
Shelving and contents

105
Shelving and contents
Shelving and contents including chuck jaws

106
Noco pails SEALED
Lot- Sealed 5 gallon pails of NOCO (2) Waylube 68, (3) NOCO turbine T-32, and (1) NOCO rust stop 293

107
NOCO pails OPENED
Lot- Open oil pails and open 55 gallon NOCO Biocool 100 dyed blue with stand

108
IR compressor TS5N5
Ingersoll Rand 5HP air compressor model TS4N5 (SN CBV204101), 80 gallon tank

109
K.O. Lee grinder
K.O. Lee Company surface grinder, 18" x 6" table, 220/440 volts, 3 phase

109
Grease guns, light, handsaw
Lot- Grease guns, cords, trouble light, and handsaw

110
Komatsu forklift
Komatsu FG25 LP forklift model FG25STIP-12 (SN 511363A), 5000 lb. @ 188", 3 stage mast, side shifter, solid tires, propane, 48" forks, (16' lift range), 6,128 +/- hours. (Delayed removal on the forklift until September 13, 2017).

111
1970 Camaro
Chevrolet Camaro project vehicle (VIN 124870N551716), 350 cu. In block on engine stand, 2 bolt mains, high performance pistons, (2) 4 speed transmissions, headers, Hurst shifter, traction bars, aluminum wheels, 1970 (vehicle sold without title or reg...

112
Insert cutters
Lot- Miscellaneous insert cutters in wooden shelf

113
Insert cutters
Lot- Miscellaneous boxes of insert cutters

114
Insert cutters
Lot- (2) plastic drawer units of insert cutters

115
Insert cutters
Lot- (2) plastic drawer units of insert cutters

116
Insert cutters
Lot- (2) tool boxes of insert cutters

117
Phase II spacer
Phase II vertical and horizontal chuck/spacer model 225-008

117
Phase II spacer 225-008
Phase II 24 position, 8" chuck, super indexing spacer model 225-008

118
Kitagawa BT-10 chuck
Kitagawa model BT-10 10" 2 jaw chuck

119
Adjustable table
10" x 7" 180 degree adjustable table

120
Milling vise
Precision milling vise, 4" jaw

121
Milling vise
Precision milling vise, 4 1/4" jaw

122
Tool holders and boring bars
Lot- (4) boxes of tool holders and boring bars

123
Boring bars, tool holders…
Lot- (3) boxes of boring bars, tool holders, reaming holder, face groove holder

124
Sleeve inserts, bars
Sleeve inserts, groove bar, hook bar

125
Face mill cutter and inserts
Face mill cutter and inserts

126
Drills and groovers
Spot and Center drills and groovers

127
Drill set
Drill set

128
Fractional drill bits
Metal drawers of fractional drill bits

129
New drills
Lot- (30) NEW HSS drills

130
Drill indexes
Lot- (2) drill indexes

131
Drills
Lot- Miscellaneous drills

132
Cutters and taps
Lot- Miscellaneous cutters and taps

133
Collets
Lot- Collets

134
CAT 40 tool holders
CAT 40 tool holders with tools

135
CAT 40 tool holders
CAT 40 new holders

136
Holders
Medium and large sleeves- Trepan and face groover

136
Wooden workbench
80" x 25" x 40" steel and wooden work bench with Columbian 5.5" jaw bench vise

136
Steel workbench
58" x 30" x 31" steel workbench

137
Pallet CNC parts
Pallet of CNC parts, screen, Fanuc Servo motors

138
Pallet tooling and chucks
Pallet of miscellaneous tooling and chucks

139
Bin tools and drills
Box/bin of miscellaneous tools, drills and bench vise

140
Workbench with scale and paper dispenser
41.5" x 22" x 36"H (60" tall) back- shipping work bench with Pelouze scale and Uline paper dispenser, with paper

141
Cosen AH-1010 horizontal band saw
Cosen AH-1010 Jay horizontal metal band saw, 10" capacity, 220 volt, 2HP motor, with 160" out feed rollers (SN 9140893)

141
Band saw blades
Lot- (2) boxes of band saw blades

142
Dock plate
Aluminum dock plate, 4' x 5'

143
General Signal transformer
General Signal 30 KVA transformer

144
Square D model 30T6H
Square D 30 KVA transformer model 30T6H with over 30' of copper hook up wire

145
Daikin pump Y480047
Daikin model Y480047 hydraulic pump

146
Bin of straps
Wooden bin of straps

147
Green hand truck
Green 2 wheel hand truck

148
Maxess blower/fan
Maxess 42" direct drive blower/fan

149
Steel cart
3" x 2" x 32" steel mobile cart

150
Steel cart
3" x 2" x 32" steel mobile cart

151
Steel cart
36" x 24" x 36" steel mobile cart

152
Steel cart
42" x 22" x 29" steel mobile cart

153
Steel cart
48" x 24" x 33.5" steel mobile cart

153
Directions
Go into office

154
OPEN
Lots 154-199 are OPEN

200
Cherry display
Cherry buffet/display, 45" x 17" x 83" high

201
Remington Rand drawer unit
Remington Rand 18" x 28" x 41" steel drawer unit

202
Wooden desk
48" x 23" x 31" wooden desk

203
Kitchenaid refrigerator
Kitchenaid refrigerator

204
Microwave cart
Microwave, cart and coffee maker

205
Cabinet
35" x 18" x 78" steel cabinet

206
Contents of office
Contents of office including desk, shelving, (2) computer desks, file cabinets…

207
Tennsco beige cabinet
Tennsco 36" x 24" x 72" beige steel cabinet

208
Cabinets and Steel desk
Lot- (4) file cabinets and (1) steel case desk

209
Steel cabinet
35" x 18" x 78" steel cabinet

210
Tennsco beige cabinet
Tennsco 36" x 24" x 72" beige steel cabinet

211
Storage room contents
Contents of storage room


Auction License: PA, MA, FL, NC, VI, WV, OH
Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Sponsored Links

Mark Manufacturing

Blackbird Asset Services, LLC

Blackbird Asset Services, LLC


Contact:
Phone:
Sale Location
80 Skillen Street
Buffalo, NY 14207
Sale Dates and Times
Wednesday Sep 6, 2017 Completed
Sale Terms and Conditions
Auction Bidder Agreement Bidder and Auctioneer agree that the Terms and Conditions listed below shall govern this Auction sale: 1. All persons seeking to register to bid acknowledges acceptance of these terms of sale, and guarantees prompt payment of all purchases by wire transfer, credit card or company check with bank letter of guarantee. No items will be removed prior to full payment, with all funds having cleared our accounts. 2. The "Bidder" becomes a "Buyer" upon the Auctioneers acceptance of their bid on one or more items in the Auction sale. 3. FULL PAYENT must be made immediately for your purchase at the Auction. This payment should be made in the form of cash, credit card (up to $5,000), company check with bank letter, cashiers check, or wire transfer (wire instructions on request). 4. Items left unpaid for more than 48 hours will be resold at the risk and expense of the Buyer. In the event that a Buyer fails to pay the entire purchase price (in addition to the Buyer's premium and any applicable tax) within 48 hours or otherwise fails to comply with these Terms and Conditions, Auctioneer and the Seller may retain any deposit paid as liquidated damages without notice. Auctioneer and the Seller reserve the right to resell such items without notice, and the defaulting Buyer shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling such items. 5. Auctioneer shall charge and collect from each Buyer a 15% Buyer's premium for each sale at the Auction, in addition to the purchase price as bid. Buyers that utilize our Webcast service shall be charged a buyer's premium of 18% for each sale at the Auction, in addition to the purchaser price. Buyers that pay by credit card will be charged a 3% convenience/credit card fee in addition to any buyers premiums so noted. 6. All items in the Auction shall be sold to the highest bidder; provided, however, that some items may be auctioned with minimum reserve prices, and/or subject to Seller's right of confirmation. Auctioneer reserves the right to reject any bid that is only a minimal increase over the preceding bid, that is not commensurate with the value of the item being offered, or any bid that Auctioneer believes was made illegally or in bad faith. Further, Auctioneer may bid at the Auction either for its own account or on behalf of the Seller or a third party. All sales are final. No returns or refunds will be permitted, unless authorized by the Seller in writing. 7. Collection of applicable taxes will be in accordance with the laws of New York. Auctioneer reserves the right to charge and collect tax on all purchases, shifting the burden of determining any 'tax exempt' status to the purchaser (if applicable). In such case tax refunds will be issued by the respective state. Sales tax for Erie County, NY is 8.75%. 8. For any purchase paid in cash with a value of $10,000 or greater, Buyer is required to complete US Treasury Dept. form #8300 at the time of purchase. 9. Removal and shipment of purchased items will be the sole responsibility of the Buyer. Removal for smalls and hand carry items will be immediately following the sale then Thursday, September 7 through Saturday September 9. Riggers scheduled thereafter by appointment. All purchases must be removed no later than September 16. Riggers are encouraged to review the PDF catalog and submit insurance certificates in advance of the auction. NO MATERIAL HANDLING EQUIPMENT OR TOOLS WILL BE MADE AVAILABLE BY THE SELLER OR AUCTIONEER FOR BUYERS' USE DURING ITEM REMOVAL. All Buyers and/or their agent riggers MUST comply with all insurance requirements as noted in the Auction catalog. 10. The Buyer becomes fully responsible for, and assumes all risk of loss and damage to items immediately upon acceptance of their bid. It shall be the responsibility of the Buyer to insure their purchases immediately. If the Buyer does not remove an item within the announced removal period, Auctioneer and the Seller may, in their sole discretion, deem the item to have been abandoned by the Buyer and the Buyer will have no further rights with respect to the item. 11. In the event of any dispute concerning the winning bid price for an item, the record kept by Auctioneer shall control. In any dispute between two or more bidders, the Auctioneers decision shall be absolute and final. 12. ALL ITEMS ARE SOLD AS IS, WHERE IS AND WITH ALL FAULTS. NEITHER SELLER NOR AUCTIONEER MAKES ANY WARRANTY, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY, VALUE OR CONDITION OF ANY ITEM. AUCTIONEER AND SELLER EXPRESSLY DISCLAIM ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT. 13. No sale shall be invalidated by reason of any defect or inaccuracy in any description or listing, and no liability shall be borne by the Auctioneer with respect to such errors. All information has been obtained from sources generally believed to be reliable, but the accuracy cannot be guaranteed or warranted by the Auctioneer. Bidder acknowledges it is their responsibility to inspect all items and to make their own inquires whether purchasing online via Webcast or live on site. 14. The aggregate respective liability of Seller or Auctioneer in respect of any other loss or damage suffered by a Buyer and arising out of or in connection with these Terms and Conditions or arising out of or in any way connected with a Buyer's participation in the Auction, whether in contract, tort (including negligence) or for breach of statutory duty or in any other way, shall not exceed (i) in the case of the Seller, the amount of the purchase price paid by the Buyer; and (ii) in the case of the Auctioneer, the Buyer's premium paid by the Buyer, in each case in respect of the goods which are the subject of the claim. 15. Computers, drives and other electronic equipment may contain copywritten software that is governed by a license agreement issued to a third party. In such event the Buyer acknowledges that said software and license agreement(s) are not included in their purchase(s). Buyer guarantees the destruction of any personally identifiable information that may be stored on such devices, and shall indemnify and hold harmless the Auction Company and their Seller from any claims, suits or other actions brought against them that relates in any way to personally identifiable information or any other data that remains on such devices, latent or obvious. 16. Buyers acknowledge that an Auction site or the Seller's site is a potentially dangerous place. Flammable, noxious, corrosive and pressurized substances may be present. Heavy equipment may be operated, and electrical circuits may be live. Every person enters such site at his or her own risk with notice of the condition of the premises and the activities that will be or have been conducted on the premises. Buyers shall so advise their agents and employees. No person shall have any claim against Auctioneer, the Seller or their respective agents or employees for any injuries sustained or for damages to or loss of person or property that may occur at such site. 17. These Terms and Conditions are incorporated and merged with any sale specific Terms and Conditions that may be distributed via our online bidding site and or at the physical auction location.
Listing Details
Due to the untimely passing of the owner, we will sell the entire contents of Mark Manufacturing, Inc. located at 80 Skillen Street in Buffalo, NY (Between Military Road and Ontario Street). Sale to include CNC equipment, manual machines, tooling, fixtures, inspection, forklift, and much more. HIGHLIGHTS OF AUCTION INCLUDE: Mazak Quick Turn 35N CNC turning center Mazak Quick Turn 10N CNC turning center Hitachi Seiki HiTec-Turn 23S-III CNC turning center Daewoo Puma 8 CNC turning center Mazak VQC 20/40 CNC vertical machining center Bridgeport 1 1/2 HP vertical milling machine Cosen horizontal band saw Komatsu FG25 LP 4500# forklift 1970 Camaro project car and much more

1
Radial Arm Saw
Ryobi RA-200 8 1/4" radial arm saw with mobile stand

2
2 die grinders
Cooper Power Tools Dotco die grinder model 12L12-36 and pneumatic die grinder with DISC-IT

3
Ramset trigger tool
Ramset trigger shot tool

4
Craftsman bench grinder
Craftsman professional 8" bench grinder with steel stand, with drawers

5
Mini drill press
5-speed mini drill press

6
Craftsman portable table saw
Craftsman 8" direct drive portable table saw

7
New air hoses
Lot- (2) NEW 3/8" x 25' air hose and (1) 1/4" x 25' NEW air hose with new blow guns and fittings

8
Delta Shopmaster Sander
Delta Shopmaster model SA180, 1" belt and 8" disc sander

9
B&D grinders
Lot- Black & Decker 5" bench grinder, Black & Decker 6" sander-polisher and Power House 1/4" corded drill

10
Sioux and pneumatic grinders
Lot- Sioux model 5978A pneumatic pencil die grinder and pneumatic die grinder with tools

11
Dremel Moto-Tool
Dremel Moto-Tool model 270 with Dremel model 290 engraver

12
Lot of gear pullers
Lot- (1) OTC 3" jaw gear puller and (1) 7" jaw gear puller

13
Lot of Emery paper, rolls, wheels…
Lot- Emery sand paper, Emery commutator rolls, grinding wheels, grinding disc and wire wheel brushes

14
Snake, shelving and lights
Lot- 50 foot 1/2" snake and 4 shelf shelving and work lights

15
OPEN
OPEN

16
Bearings and grease gun
Box of bearings and grease gun

17
B&D drill
Black & Decker corded drill/driver

18
B&D corded saw
Black & Decker model JS620G corded JIG saw

19
Dewalt corded drill
Dewalt model DWD110 3/8" VSR corded drill

20
Cummins socket set
Cummins 21 PC 3/4" drive socket set with case

21
Stamps
Lot- numeric and alphabet metal stamps

22
"C" clamps
Lot- (7) Made in USA "C" clamps

23
Jorgensen clamps
Lot- (2) Jorgensen 18" bar clamps and (1) Jorgensen 12" bar clamp, (2) Vise grip 11R welding clamps and vise grip 10CR vise grip

24
Prest-O-Lite torch and regulator lot
Lot- Prest-O-Lite acetylene plumbing torch and regulator, Victor cutting torch with welding tips

25
Blow torch
Blow torch

26
B&D and Florida wrench and sander
Lot- Black & Decker pneumatic impact wrench, Florida pneumatic DA sander, Binks model 18 spray gun

27
Hand pads
Lot- (2) boxes of Scotch-Brite model 7447 hand pads, Brite Star maroon model 447 hand pads, (20) maroon 8" buff discs and (5) blue 8" buff discs

28
Tool box and tools
Tool box with tools

29
Tool box and tools
Tool box with tools

30
McCulloch Mite-E-Lite
McCulloch Mite-E-Lite portable generator model RA120, 1200 watts

31
Sandy Jet sand blaster and tank
Lot- Sandy Jet sand blaster and Midwest Products portable air tank

32
Green workbench
90" x 34" high wood and steel green workbench

33
Drills, taps, cutters…
Lot- Boxes of drills, taps, cutters, files and reamers on floor

34
Chainfalls
Lot- CM 3 ton chainfall, Duracraft 1 ton chainfall and 18' of tow chain

35
Bear Paw magnet
Bear Paw cub model magnet

36
Steel cart and vise
31" x 20" x 36.5" steel mobile cart with 4 drawers and Made in USA 3" bench vise

37
Torx and Allen wrenches
Lot- Torx and Allen standard and metric wrenches

38
Craftsman toolbox and tools
Craftsman 27" x 19" x 53" top and bottom tool box filled with tools

39
Craftsman toolbox and tools
Craftsman tool box with tools

40
Steel toolbox and tools
Steel tool box with tools

41
Mobile steel cart
Mobile steel cart

42
Taper drill bits
(2) boxes of USA made taper drill bits

43
Reamers
Lot- Alvord-Polk tool company reamers, 21/32" to 1 1/4"

44
Chargers
Lot- (2) die hard model 200.71222 12 volt battery chargers

45
Mitutoyo and Starrett Micrometers
Lot- (10) Mitutoyo and Starrett micrometers, 1"-7"

46
Micrometers
Lot - (3) micrometers, 0-1" to 2"-3"

47
Starrett micrometers
Lot- (3) Starrett model 449, 440 and 449 depth micrometers

48
Fowler depth gauge
Fowler dial depth gauge

49
Micrometers
Lot- Miscellaneous micrometers

50
Fowler bore gauge
Fowler 1.4" to 6" cylinder bore gauge

51
Fowler bore gauge
Fowler 1.4" to 6" cylinder bore gauge

52
Fowler bore gauge
Fowler 1.4" to 6" cylinder bore gauge

53
Fowler cylinder bore gauge and parts
Fowler 1.4" to 6" cylinder bore gauge with miscellaneous parts

54
Mitutoyo bore gauge
Mitutoyo .7"-1.4" bore gauge

55
Fowler gauge parts
Lot- Miscellaneous Fowler bore gauge parts

56
Bore gauges
Lot- Bore gauges (MHC), .24"-4" MHC depth gauge

57
Shars caliper
Shars 40" vernier long jaw caliper with case

58
Vernier caliper
24" vernier caliper with case

59
Starrett and Alfred Emerson calipers
Lot- Starrett model 196 indicator, Alfred Emerson level and angle finder, Brown & Sharpe model 577-7" vernier caliper

60
Fowler and Mitutoyo calipers
Lot- Fowler 12" vernier dial caliper indicator, Mitutoyo 8" vernier caliper, and 8" vernier caliper

61
Miscellaneous calipers
Lot- 8 miscellaneous calipers

62
Miscellaneous calipers and tools
Lot- Miscellaneous calipers and measuring tools

63
Pin gauges and blocks
Lot- (5) cases of pin gauges, gauge blocks and parallels

64
Edsal cart
28" x 20" x 32" Edsal mobile steel cart

65
Starrett and GEM indicators
Lot- Starrett and GEM last word indicators

66
Plug and small hole gauges
Lot- Miscellaneous plug gauges, small hole gauges and thread measuring wire sets

67
Shim material
Box of shim material

68
Starrett 657-1 MAG base and holder
NEW Starrett model 657-1 MAG base with holder and Starrett model 657 MAG base

69
Height gauge
12" height gauge

70
MAG bases, holders and indicators
Lot- (2) MAG bases, holders and indicators

71
Indicator bases
Lot- Miscellaneous indicator bases

72
5 MAG bases and holders
Lot- Miscellaneous 5 MAG bases and holders

73
Indicators
Box of miscellaneous indicators

74
Steel cabinet
36" x 24" x 35"H steel cabinet with 2 doors and shelves

75
Steel cabinet
36" x 24" x 35"H steel cabinet with 2 doors and shelves

76
3 indicator holders and indicators
Lot- (3) granite base indicator holders with 2 dial indicators

77
Starrett
Lot- Starrett model 599 planer and sharper gauge, Lufkin model 901A planer and sharper gauge, with 2 sines

78
599 planer and sharper gauge
Pair on "V" blocks, 6"

79
Plates and blocks with holes
Miscellaneous angle plates and blocks with holes

80
Granite surface plates
Lot- (3) granite surface plates- (2) 12 1/4" x 9" x 3 1/8", (1) 18 1/4" x 12 1/4" x 3 1/8"

81
Granite surface plates
24 1/8" x 18 3/16" x 3 1/8" granite surface plate with stand (25" x 19" x 36.5")

82
OPEN
Lots 82-84 are OPEN

85
Mazak Quickturn 35N CNC center
Mazak Quickturn 35N CNC turning center (Model QT 35N univ, SN 113583), 30HP, 3 gear ranges, 24 position turret, Mazatrol + plus CNC control, 12" 3 jaw chuck, 2 3/4" thru spindle (recent spindle motor rebuilding), 230/240 volt, 20" max swing x 40", Ma...

86
Mazak Quickturn CNC center 10N
Mazak Quickturn 10N CNC turning center (SN 64494), 1 gear range, 8 tool holders, Mazatrol CAM T-2 control, 8 position turret, 1 3/4" thru spindle, 18" max swing x 24

87
Daewoo Puma 8 CNC center
Daewoo Puma 8 CNC turning center (SN 370429), 220V, 3PH, Fanuc 10t-F control, 6 position turret, 1 1/2" thru spindle, 18" max swing x 24", Jorgensen chip conveyor (SN A891100-7), 1989

88
Hitachi Seiki Hitec-turn 23S II
Hitachi Seiki Hitec-turn 23S II CNC turning center (SN HTS 3013 HL), 220/ 3 phase, Seicos L multi control, 10 position turret, 10" 3-jaw chuck, 3" thru-spindle, 18" max swing x 30", Mayfran chip-tote chip conveyor (SN 96M3891)

89
Boring bars, holders
Lot- A lot of boring bars, tool holders in bottom of shelving

90
Drills and tooling
Drills and tooling in top shelving

91
Chuck jaws on shelf
Lot- Chuck jaws on shelf

92
Chuck jaws on shelf
Lot- Chuck jaws on shelf

93
Chuck jaws on shelf
Lot- Chuck jaws on shelf

94
Tool holders, tooling, oil skimmer
Lot- Tool holders, tooling and leeves, coolant oil skimmer on bottom shelf

95
Shelving
Lot- (2) shelving units

96
Pie jaws
Shelf of pie jaws

97
Jaws on shelf
Lot- Jaws on shelf

98
Jaws on shelf
Lot- Jaws on shelf

99
Jaws on shelf
Lot- Jaws on shelf

100
Mazak VQC CNC center
Mazak VQC 20/40B CNC machining center (SN 59863), X=40", Y=20", Z=18", Mazatrol CAM M-2 control, 22 x 49 t-slot table, CAT 40 taper, 30 position ATC, 1985

101
LNS hydrobar THB32-3.7
LNS hydrobar bar feeder model THB32-3.7 (SN 10.495), 18' with stand

102
Cabinet and tooling
Cabinet and tooling

103
Bridgeport 1 1/2 HP mill
Bridgeport 1 1/2 HP vertical milling machine, 9" x 42" servo feed T-slotted table, 230V 3PH, SN156186 (1973)

104
Shelving and contents
Shelving and contents

105
Shelving and contents
Shelving and contents including chuck jaws

106
Noco pails SEALED
Lot- Sealed 5 gallon pails of NOCO (2) Waylube 68, (3) NOCO turbine T-32, and (1) NOCO rust stop 293

107
NOCO pails OPENED
Lot- Open oil pails and open 55 gallon NOCO Biocool 100 dyed blue with stand

108
IR compressor TS5N5
Ingersoll Rand 5HP air compressor model TS4N5 (SN CBV204101), 80 gallon tank

109
K.O. Lee grinder
K.O. Lee Company surface grinder, 18" x 6" table, 220/440 volts, 3 phase

109
Grease guns, light, handsaw
Lot- Grease guns, cords, trouble light, and handsaw

110
Komatsu forklift
Komatsu FG25 LP forklift model FG25STIP-12 (SN 511363A), 5000 lb. @ 188", 3 stage mast, side shifter, solid tires, propane, 48" forks, (16' lift range), 6,128 +/- hours. (Delayed removal on the forklift until September 13, 2017).

111
1970 Camaro
Chevrolet Camaro project vehicle (VIN 124870N551716), 350 cu. In block on engine stand, 2 bolt mains, high performance pistons, (2) 4 speed transmissions, headers, Hurst shifter, traction bars, aluminum wheels, 1970 (vehicle sold without title or reg...

112
Insert cutters
Lot- Miscellaneous insert cutters in wooden shelf

113
Insert cutters
Lot- Miscellaneous boxes of insert cutters

114
Insert cutters
Lot- (2) plastic drawer units of insert cutters

115
Insert cutters
Lot- (2) plastic drawer units of insert cutters

116
Insert cutters
Lot- (2) tool boxes of insert cutters

117
Phase II spacer
Phase II vertical and horizontal chuck/spacer model 225-008

117
Phase II spacer 225-008
Phase II 24 position, 8" chuck, super indexing spacer model 225-008

118
Kitagawa BT-10 chuck
Kitagawa model BT-10 10" 2 jaw chuck

119
Adjustable table
10" x 7" 180 degree adjustable table

120
Milling vise
Precision milling vise, 4" jaw

121
Milling vise
Precision milling vise, 4 1/4" jaw

122
Tool holders and boring bars
Lot- (4) boxes of tool holders and boring bars

123
Boring bars, tool holders…
Lot- (3) boxes of boring bars, tool holders, reaming holder, face groove holder

124
Sleeve inserts, bars
Sleeve inserts, groove bar, hook bar

125
Face mill cutter and inserts
Face mill cutter and inserts

126
Drills and groovers
Spot and Center drills and groovers

127
Drill set
Drill set

128
Fractional drill bits
Metal drawers of fractional drill bits

129
New drills
Lot- (30) NEW HSS drills

130
Drill indexes
Lot- (2) drill indexes

131
Drills
Lot- Miscellaneous drills

132
Cutters and taps
Lot- Miscellaneous cutters and taps

133
Collets
Lot- Collets

134
CAT 40 tool holders
CAT 40 tool holders with tools

135
CAT 40 tool holders
CAT 40 new holders

136
Holders
Medium and large sleeves- Trepan and face groover

136
Wooden workbench
80" x 25" x 40" steel and wooden work bench with Columbian 5.5" jaw bench vise

136
Steel workbench
58" x 30" x 31" steel workbench

137
Pallet CNC parts
Pallet of CNC parts, screen, Fanuc Servo motors

138
Pallet tooling and chucks
Pallet of miscellaneous tooling and chucks

139
Bin tools and drills
Box/bin of miscellaneous tools, drills and bench vise

140
Workbench with scale and paper dispenser
41.5" x 22" x 36"H (60" tall) back- shipping work bench with Pelouze scale and Uline paper dispenser, with paper

141
Cosen AH-1010 horizontal band saw
Cosen AH-1010 Jay horizontal metal band saw, 10" capacity, 220 volt, 2HP motor, with 160" out feed rollers (SN 9140893)

141
Band saw blades
Lot- (2) boxes of band saw blades

142
Dock plate
Aluminum dock plate, 4' x 5'

143
General Signal transformer
General Signal 30 KVA transformer

144
Square D model 30T6H
Square D 30 KVA transformer model 30T6H with over 30' of copper hook up wire

145
Daikin pump Y480047
Daikin model Y480047 hydraulic pump

146
Bin of straps
Wooden bin of straps

147
Green hand truck
Green 2 wheel hand truck

148
Maxess blower/fan
Maxess 42" direct drive blower/fan

149
Steel cart
3" x 2" x 32" steel mobile cart

150
Steel cart
3" x 2" x 32" steel mobile cart

151
Steel cart
36" x 24" x 36" steel mobile cart

152
Steel cart
42" x 22" x 29" steel mobile cart

153
Steel cart
48" x 24" x 33.5" steel mobile cart

153
Directions
Go into office

154
OPEN
Lots 154-199 are OPEN

200
Cherry display
Cherry buffet/display, 45" x 17" x 83" high

201
Remington Rand drawer unit
Remington Rand 18" x 28" x 41" steel drawer unit

202
Wooden desk
48" x 23" x 31" wooden desk

203
Kitchenaid refrigerator
Kitchenaid refrigerator

204
Microwave cart
Microwave, cart and coffee maker

205
Cabinet
35" x 18" x 78" steel cabinet

206
Contents of office
Contents of office including desk, shelving, (2) computer desks, file cabinets…

207
Tennsco beige cabinet
Tennsco 36" x 24" x 72" beige steel cabinet

208
Cabinets and Steel desk
Lot- (4) file cabinets and (1) steel case desk

209
Steel cabinet
35" x 18" x 78" steel cabinet

210
Tennsco beige cabinet
Tennsco 36" x 24" x 72" beige steel cabinet

211
Storage room contents
Contents of storage room

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Mark Manufacturing
 Live Auction
Auction Date(s)
Wednesday Sep 6, 2017 Completed
Auction Location

Buffalo, NY 14207
Company
Blackbird Asset Services, LLC

Website: blackbirdauctions.com

Listing Terms and Conditions
Auction Bidder Agreement Bidder and Auctioneer agree that the Terms and Conditions listed below shall govern this Auction sale: 1. All persons seeking to register to bid acknowledges acceptance of these terms of sale, and guarantees prompt payment of all purchases by wire transfer, credit card or company check with bank letter of guarantee. No items will be removed prior to full payment, with all funds having cleared our accounts. 2. The "Bidder" becomes a "Buyer" upon the Auctioneers acceptance of their bid on one or more items in the Auction sale. 3. FULL PAYENT must be made immediately for your purchase at the Auction. This payment should be made in the form of cash, credit card (up to $5,000), company check with bank letter, cashiers check, or wire transfer (wire instructions on request). 4. Items left unpaid for more than 48 hours will be resold at the risk and expense of the Buyer. In the event that a Buyer fails to pay the entire purchase price (in addition to the Buyer's premium and any applicable tax) within 48 hours or otherwise fails to comply with these Terms and Conditions, Auctioneer and the Seller may retain any deposit paid as liquidated damages without notice. Auctioneer and the Seller reserve the right to resell such items without notice, and the defaulting Buyer shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling such items. 5. Auctioneer shall charge and collect from each Buyer a 15% Buyer's premium for each sale at the Auction, in addition to the purchase price as bid. Buyers that utilize our Webcast service shall be charged a buyer's premium of 18% for each sale at the Auction, in addition to the purchaser price. Buyers that pay by credit card will be charged a 3% convenience/credit card fee in addition to any buyers premiums so noted. 6. All items in the Auction shall be sold to the highest bidder; provided, however, that some items may be auctioned with minimum reserve prices, and/or subject to Seller's right of confirmation. Auctioneer reserves the right to reject any bid that is only a minimal increase over the preceding bid, that is not commensurate with the value of the item being offered, or any bid that Auctioneer believes was made illegally or in bad faith. Further, Auctioneer may bid at the Auction either for its own account or on behalf of the Seller or a third party. All sales are final. No returns or refunds will be permitted, unless authorized by the Seller in writing. 7. Collection of applicable taxes will be in accordance with the laws of New York. Auctioneer reserves the right to charge and collect tax on all purchases, shifting the burden of determining any 'tax exempt' status to the purchaser (if applicable). In such case tax refunds will be issued by the respective state. Sales tax for Erie County, NY is 8.75%. 8. For any purchase paid in cash with a value of $10,000 or greater, Buyer is required to complete US Treasury Dept. form #8300 at the time of purchase. 9. Removal and shipment of purchased items will be the sole responsibility of the Buyer. Removal for smalls and hand carry items will be immediately following the sale then Thursday, September 7 through Saturday September 9. Riggers scheduled thereafter by appointment. All purchases must be removed no later than September 16. Riggers are encouraged to review the PDF catalog and submit insurance certificates in advance of the auction. NO MATERIAL HANDLING EQUIPMENT OR TOOLS WILL BE MADE AVAILABLE BY THE SELLER OR AUCTIONEER FOR BUYERS' USE DURING ITEM REMOVAL. All Buyers and/or their agent riggers MUST comply with all insurance requirements as noted in the Auction catalog. 10. The Buyer becomes fully responsible for, and assumes all risk of loss and damage to items immediately upon acceptance of their bid. It shall be the responsibility of the Buyer to insure their purchases immediately. If the Buyer does not remove an item within the announced removal period, Auctioneer and the Seller may, in their sole discretion, deem the item to have been abandoned by the Buyer and the Buyer will have no further rights with respect to the item. 11. In the event of any dispute concerning the winning bid price for an item, the record kept by Auctioneer shall control. In any dispute between two or more bidders, the Auctioneers decision shall be absolute and final. 12. ALL ITEMS ARE SOLD AS IS, WHERE IS AND WITH ALL FAULTS. NEITHER SELLER NOR AUCTIONEER MAKES ANY WARRANTY, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY, VALUE OR CONDITION OF ANY ITEM. AUCTIONEER AND SELLER EXPRESSLY DISCLAIM ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT. 13. No sale shall be invalidated by reason of any defect or inaccuracy in any description or listing, and no liability shall be borne by the Auctioneer with respect to such errors. All information has been obtained from sources generally believed to be reliable, but the accuracy cannot be guaranteed or warranted by the Auctioneer. Bidder acknowledges it is their responsibility to inspect all items and to make their own inquires whether purchasing online via Webcast or live on site. 14. The aggregate respective liability of Seller or Auctioneer in respect of any other loss or damage suffered by a Buyer and arising out of or in connection with these Terms and Conditions or arising out of or in any way connected with a Buyer's participation in the Auction, whether in contract, tort (including negligence) or for breach of statutory duty or in any other way, shall not exceed (i) in the case of the Seller, the amount of the purchase price paid by the Buyer; and (ii) in the case of the Auctioneer, the Buyer's premium paid by the Buyer, in each case in respect of the goods which are the subject of the claim. 15. Computers, drives and other electronic equipment may contain copywritten software that is governed by a license agreement issued to a third party. In such event the Buyer acknowledges that said software and license agreement(s) are not included in their purchase(s). Buyer guarantees the destruction of any personally identifiable information that may be stored on such devices, and shall indemnify and hold harmless the Auction Company and their Seller from any claims, suits or other actions brought against them that relates in any way to personally identifiable information or any other data that remains on such devices, latent or obvious. 16. Buyers acknowledge that an Auction site or the Seller's site is a potentially dangerous place. Flammable, noxious, corrosive and pressurized substances may be present. Heavy equipment may be operated, and electrical circuits may be live. Every person enters such site at his or her own risk with notice of the condition of the premises and the activities that will be or have been conducted on the premises. Buyers shall so advise their agents and employees. No person shall have any claim against Auctioneer, the Seller or their respective agents or employees for any injuries sustained or for damages to or loss of person or property that may occur at such site. 17. These Terms and Conditions are incorporated and merged with any sale specific Terms and Conditions that may be distributed via our online bidding site and or at the physical auction location.
Due to the untimely passing of the owner, we will sell the entire contents of Mark Manufacturing, Inc. located at 80 Skillen Street in Buffalo, NY (Between Military Road and Ontario Street). Sale to include CNC equipment, manual machines, tooling, fixtures, inspection, forklift, and much more. HIGHLIGHTS OF AUCTION INCLUDE: Mazak Quick Turn 35N CNC turning center Mazak Quick Turn 10N CNC turning center Hitachi Seiki HiTec-Turn 23S-III CNC turning center Daewoo Puma 8 CNC turning center Mazak VQC 20/40 CNC vertical machining center Bridgeport 1 1/2 HP vertical milling machine Cosen horizontal band saw Komatsu FG25 LP 4500# forklift 1970 Camaro project car and much more

1
Radial Arm Saw
Ryobi RA-200 8 1/4" radial arm saw with mobile stand

2
2 die grinders
Cooper Power Tools Dotco die grinder model 12L12-36 and pneumatic die grinder with DISC-IT

3
Ramset trigger tool
Ramset trigger shot tool

4
Craftsman bench grinder
Craftsman professional 8" bench grinder with steel stand, with drawers

5
Mini drill press
5-speed mini drill press

6
Craftsman portable table saw
Craftsman 8" direct drive portable table saw

7
New air hoses
Lot- (2) NEW 3/8" x 25' air hose and (1) 1/4" x 25' NEW air hose with new blow guns and fittings

8
Delta Shopmaster Sander
Delta Shopmaster model SA180, 1" belt and 8" disc sander

9
B&D grinders
Lot- Black & Decker 5" bench grinder, Black & Decker 6" sander-polisher and Power House 1/4" corded drill

10
Sioux and pneumatic grinders
Lot- Sioux model 5978A pneumatic pencil die grinder and pneumatic die grinder with tools

11
Dremel Moto-Tool
Dremel Moto-Tool model 270 with Dremel model 290 engraver

12
Lot of gear pullers
Lot- (1) OTC 3" jaw gear puller and (1) 7" jaw gear puller

13
Lot of Emery paper, rolls, wheels…
Lot- Emery sand paper, Emery commutator rolls, grinding wheels, grinding disc and wire wheel brushes

14
Snake, shelving and lights
Lot- 50 foot 1/2" snake and 4 shelf shelving and work lights

15
OPEN
OPEN

16
Bearings and grease gun
Box of bearings and grease gun

17
B&D drill
Black & Decker corded drill/driver

18
B&D corded saw
Black & Decker model JS620G corded JIG saw

19
Dewalt corded drill
Dewalt model DWD110 3/8" VSR corded drill

20
Cummins socket set
Cummins 21 PC 3/4" drive socket set with case

21
Stamps
Lot- numeric and alphabet metal stamps

22
"C" clamps
Lot- (7) Made in USA "C" clamps

23
Jorgensen clamps
Lot- (2) Jorgensen 18" bar clamps and (1) Jorgensen 12" bar clamp, (2) Vise grip 11R welding clamps and vise grip 10CR vise grip

24
Prest-O-Lite torch and regulator lot
Lot- Prest-O-Lite acetylene plumbing torch and regulator, Victor cutting torch with welding tips

25
Blow torch
Blow torch

26
B&D and Florida wrench and sander
Lot- Black & Decker pneumatic impact wrench, Florida pneumatic DA sander, Binks model 18 spray gun

27
Hand pads
Lot- (2) boxes of Scotch-Brite model 7447 hand pads, Brite Star maroon model 447 hand pads, (20) maroon 8" buff discs and (5) blue 8" buff discs

28
Tool box and tools
Tool box with tools

29
Tool box and tools
Tool box with tools

30
McCulloch Mite-E-Lite
McCulloch Mite-E-Lite portable generator model RA120, 1200 watts

31
Sandy Jet sand blaster and tank
Lot- Sandy Jet sand blaster and Midwest Products portable air tank

32
Green workbench
90" x 34" high wood and steel green workbench

33
Drills, taps, cutters…
Lot- Boxes of drills, taps, cutters, files and reamers on floor

34
Chainfalls
Lot- CM 3 ton chainfall, Duracraft 1 ton chainfall and 18' of tow chain

35
Bear Paw magnet
Bear Paw cub model magnet

36
Steel cart and vise
31" x 20" x 36.5" steel mobile cart with 4 drawers and Made in USA 3" bench vise

37
Torx and Allen wrenches
Lot- Torx and Allen standard and metric wrenches

38
Craftsman toolbox and tools
Craftsman 27" x 19" x 53" top and bottom tool box filled with tools

39
Craftsman toolbox and tools
Craftsman tool box with tools

40
Steel toolbox and tools
Steel tool box with tools

41
Mobile steel cart
Mobile steel cart

42
Taper drill bits
(2) boxes of USA made taper drill bits

43
Reamers
Lot- Alvord-Polk tool company reamers, 21/32" to 1 1/4"

44
Chargers
Lot- (2) die hard model 200.71222 12 volt battery chargers

45
Mitutoyo and Starrett Micrometers
Lot- (10) Mitutoyo and Starrett micrometers, 1"-7"

46
Micrometers
Lot - (3) micrometers, 0-1" to 2"-3"

47
Starrett micrometers
Lot- (3) Starrett model 449, 440 and 449 depth micrometers

48
Fowler depth gauge
Fowler dial depth gauge

49
Micrometers
Lot- Miscellaneous micrometers

50
Fowler bore gauge
Fowler 1.4" to 6" cylinder bore gauge

51
Fowler bore gauge
Fowler 1.4" to 6" cylinder bore gauge

52
Fowler bore gauge
Fowler 1.4" to 6" cylinder bore gauge

53
Fowler cylinder bore gauge and parts
Fowler 1.4" to 6" cylinder bore gauge with miscellaneous parts

54
Mitutoyo bore gauge
Mitutoyo .7"-1.4" bore gauge

55
Fowler gauge parts
Lot- Miscellaneous Fowler bore gauge parts

56
Bore gauges
Lot- Bore gauges (MHC), .24"-4" MHC depth gauge

57
Shars caliper
Shars 40" vernier long jaw caliper with case

58
Vernier caliper
24" vernier caliper with case

59
Starrett and Alfred Emerson calipers
Lot- Starrett model 196 indicator, Alfred Emerson level and angle finder, Brown & Sharpe model 577-7" vernier caliper

60
Fowler and Mitutoyo calipers
Lot- Fowler 12" vernier dial caliper indicator, Mitutoyo 8" vernier caliper, and 8" vernier caliper

61
Miscellaneous calipers
Lot- 8 miscellaneous calipers

62
Miscellaneous calipers and tools
Lot- Miscellaneous calipers and measuring tools

63
Pin gauges and blocks
Lot- (5) cases of pin gauges, gauge blocks and parallels

64
Edsal cart
28" x 20" x 32" Edsal mobile steel cart

65
Starrett and GEM indicators
Lot- Starrett and GEM last word indicators

66
Plug and small hole gauges
Lot- Miscellaneous plug gauges, small hole gauges and thread measuring wire sets

67
Shim material
Box of shim material

68
Starrett 657-1 MAG base and holder
NEW Starrett model 657-1 MAG base with holder and Starrett model 657 MAG base

69
Height gauge
12" height gauge

70
MAG bases, holders and indicators
Lot- (2) MAG bases, holders and indicators

71
Indicator bases
Lot- Miscellaneous indicator bases

72
5 MAG bases and holders
Lot- Miscellaneous 5 MAG bases and holders

73
Indicators
Box of miscellaneous indicators

74
Steel cabinet
36" x 24" x 35"H steel cabinet with 2 doors and shelves

75
Steel cabinet
36" x 24" x 35"H steel cabinet with 2 doors and shelves

76
3 indicator holders and indicators
Lot- (3) granite base indicator holders with 2 dial indicators

77
Starrett
Lot- Starrett model 599 planer and sharper gauge, Lufkin model 901A planer and sharper gauge, with 2 sines

78
599 planer and sharper gauge
Pair on "V" blocks, 6"

79
Plates and blocks with holes
Miscellaneous angle plates and blocks with holes

80
Granite surface plates
Lot- (3) granite surface plates- (2) 12 1/4" x 9" x 3 1/8", (1) 18 1/4" x 12 1/4" x 3 1/8"

81
Granite surface plates
24 1/8" x 18 3/16" x 3 1/8" granite surface plate with stand (25" x 19" x 36.5")

82
OPEN
Lots 82-84 are OPEN

85
Mazak Quickturn 35N CNC center
Mazak Quickturn 35N CNC turning center (Model QT 35N univ, SN 113583), 30HP, 3 gear ranges, 24 position turret, Mazatrol + plus CNC control, 12" 3 jaw chuck, 2 3/4" thru spindle (recent spindle motor rebuilding), 230/240 volt, 20" max swing x 40", Ma...

86
Mazak Quickturn CNC center 10N
Mazak Quickturn 10N CNC turning center (SN 64494), 1 gear range, 8 tool holders, Mazatrol CAM T-2 control, 8 position turret, 1 3/4" thru spindle, 18" max swing x 24

87
Daewoo Puma 8 CNC center
Daewoo Puma 8 CNC turning center (SN 370429), 220V, 3PH, Fanuc 10t-F control, 6 position turret, 1 1/2" thru spindle, 18" max swing x 24", Jorgensen chip conveyor (SN A891100-7), 1989

88
Hitachi Seiki Hitec-turn 23S II
Hitachi Seiki Hitec-turn 23S II CNC turning center (SN HTS 3013 HL), 220/ 3 phase, Seicos L multi control, 10 position turret, 10" 3-jaw chuck, 3" thru-spindle, 18" max swing x 30", Mayfran chip-tote chip conveyor (SN 96M3891)

89
Boring bars, holders
Lot- A lot of boring bars, tool holders in bottom of shelving

90
Drills and tooling
Drills and tooling in top shelving

91
Chuck jaws on shelf
Lot- Chuck jaws on shelf

92
Chuck jaws on shelf
Lot- Chuck jaws on shelf

93
Chuck jaws on shelf
Lot- Chuck jaws on shelf

94
Tool holders, tooling, oil skimmer
Lot- Tool holders, tooling and leeves, coolant oil skimmer on bottom shelf

95
Shelving
Lot- (2) shelving units

96
Pie jaws
Shelf of pie jaws

97
Jaws on shelf
Lot- Jaws on shelf

98
Jaws on shelf
Lot- Jaws on shelf

99
Jaws on shelf
Lot- Jaws on shelf

100
Mazak VQC CNC center
Mazak VQC 20/40B CNC machining center (SN 59863), X=40", Y=20", Z=18", Mazatrol CAM M-2 control, 22 x 49 t-slot table, CAT 40 taper, 30 position ATC, 1985

101
LNS hydrobar THB32-3.7
LNS hydrobar bar feeder model THB32-3.7 (SN 10.495), 18' with stand

102
Cabinet and tooling
Cabinet and tooling

103
Bridgeport 1 1/2 HP mill
Bridgeport 1 1/2 HP vertical milling machine, 9" x 42" servo feed T-slotted table, 230V 3PH, SN156186 (1973)

104
Shelving and contents
Shelving and contents

105
Shelving and contents
Shelving and contents including chuck jaws

106
Noco pails SEALED
Lot- Sealed 5 gallon pails of NOCO (2) Waylube 68, (3) NOCO turbine T-32, and (1) NOCO rust stop 293

107
NOCO pails OPENED
Lot- Open oil pails and open 55 gallon NOCO Biocool 100 dyed blue with stand

108
IR compressor TS5N5
Ingersoll Rand 5HP air compressor model TS4N5 (SN CBV204101), 80 gallon tank

109
K.O. Lee grinder
K.O. Lee Company surface grinder, 18" x 6" table, 220/440 volts, 3 phase

109
Grease guns, light, handsaw
Lot- Grease guns, cords, trouble light, and handsaw

110
Komatsu forklift
Komatsu FG25 LP forklift model FG25STIP-12 (SN 511363A), 5000 lb. @ 188", 3 stage mast, side shifter, solid tires, propane, 48" forks, (16' lift range), 6,128 +/- hours. (Delayed removal on the forklift until September 13, 2017).

111
1970 Camaro
Chevrolet Camaro project vehicle (VIN 124870N551716), 350 cu. In block on engine stand, 2 bolt mains, high performance pistons, (2) 4 speed transmissions, headers, Hurst shifter, traction bars, aluminum wheels, 1970 (vehicle sold without title or reg...

112
Insert cutters
Lot- Miscellaneous insert cutters in wooden shelf

113
Insert cutters
Lot- Miscellaneous boxes of insert cutters

114
Insert cutters
Lot- (2) plastic drawer units of insert cutters

115
Insert cutters
Lot- (2) plastic drawer units of insert cutters

116
Insert cutters
Lot- (2) tool boxes of insert cutters

117
Phase II spacer
Phase II vertical and horizontal chuck/spacer model 225-008

117
Phase II spacer 225-008
Phase II 24 position, 8" chuck, super indexing spacer model 225-008

118
Kitagawa BT-10 chuck
Kitagawa model BT-10 10" 2 jaw chuck

119
Adjustable table
10" x 7" 180 degree adjustable table

120
Milling vise
Precision milling vise, 4" jaw

121
Milling vise
Precision milling vise, 4 1/4" jaw

122
Tool holders and boring bars
Lot- (4) boxes of tool holders and boring bars

123
Boring bars, tool holders…
Lot- (3) boxes of boring bars, tool holders, reaming holder, face groove holder

124
Sleeve inserts, bars
Sleeve inserts, groove bar, hook bar

125
Face mill cutter and inserts
Face mill cutter and inserts

126
Drills and groovers
Spot and Center drills and groovers

127
Drill set
Drill set

128
Fractional drill bits
Metal drawers of fractional drill bits

129
New drills
Lot- (30) NEW HSS drills

130
Drill indexes
Lot- (2) drill indexes

131
Drills
Lot- Miscellaneous drills

132
Cutters and taps
Lot- Miscellaneous cutters and taps

133
Collets
Lot- Collets

134
CAT 40 tool holders
CAT 40 tool holders with tools

135
CAT 40 tool holders
CAT 40 new holders

136
Holders
Medium and large sleeves- Trepan and face groover

136
Wooden workbench
80" x 25" x 40" steel and wooden work bench with Columbian 5.5" jaw bench vise

136
Steel workbench
58" x 30" x 31" steel workbench

137
Pallet CNC parts
Pallet of CNC parts, screen, Fanuc Servo motors

138
Pallet tooling and chucks
Pallet of miscellaneous tooling and chucks

139
Bin tools and drills
Box/bin of miscellaneous tools, drills and bench vise

140
Workbench with scale and paper dispenser
41.5" x 22" x 36"H (60" tall) back- shipping work bench with Pelouze scale and Uline paper dispenser, with paper

141
Cosen AH-1010 horizontal band saw
Cosen AH-1010 Jay horizontal metal band saw, 10" capacity, 220 volt, 2HP motor, with 160" out feed rollers (SN 9140893)

141
Band saw blades
Lot- (2) boxes of band saw blades

142
Dock plate
Aluminum dock plate, 4' x 5'

143
General Signal transformer
General Signal 30 KVA transformer

144
Square D model 30T6H
Square D 30 KVA transformer model 30T6H with over 30' of copper hook up wire

145
Daikin pump Y480047
Daikin model Y480047 hydraulic pump

146
Bin of straps
Wooden bin of straps

147
Green hand truck
Green 2 wheel hand truck

148
Maxess blower/fan
Maxess 42" direct drive blower/fan

149
Steel cart
3" x 2" x 32" steel mobile cart

150
Steel cart
3" x 2" x 32" steel mobile cart

151
Steel cart
36" x 24" x 36" steel mobile cart

152
Steel cart
42" x 22" x 29" steel mobile cart

153
Steel cart
48" x 24" x 33.5" steel mobile cart

153
Directions
Go into office

154
OPEN
Lots 154-199 are OPEN

200
Cherry display
Cherry buffet/display, 45" x 17" x 83" high

201
Remington Rand drawer unit
Remington Rand 18" x 28" x 41" steel drawer unit

202
Wooden desk
48" x 23" x 31" wooden desk

203
Kitchenaid refrigerator
Kitchenaid refrigerator

204
Microwave cart
Microwave, cart and coffee maker

205
Cabinet
35" x 18" x 78" steel cabinet

206
Contents of office
Contents of office including desk, shelving, (2) computer desks, file cabinets…

207
Tennsco beige cabinet
Tennsco 36" x 24" x 72" beige steel cabinet

208
Cabinets and Steel desk
Lot- (4) file cabinets and (1) steel case desk

209
Steel cabinet
35" x 18" x 78" steel cabinet

210
Tennsco beige cabinet
Tennsco 36" x 24" x 72" beige steel cabinet

211
Storage room contents
Contents of storage room