Terms & Conditions

By accepting the terms and conditions of this auction you acknowledge you are entering into a legal and binding contract. You agree to abide by all terms and conditions and you acknowledge receipt of all explanations and information made available by Steffes Group, Inc., also referred to as Steffes Group or Company. 

Payment

When paying within the stated time and with our acceptable payment methods: 

• A 10% buyer’s premium with a maximum charge of $1,000 per item applies to items purchased on Timed Online Auctions.
• A 2% buyer’s premium with a maximum charge of $1,000 per item applies to items purchased on Live Webcast Auctions.

You agree to make payment for all online purchases in U.S. funds within 2 business days of receipt of invoice by one of the acceptable forms of payment unless approval of financing arrangements is made with Steffes Group. To issue a check by fax, simply write a check as you normally would and fax a copy to us. All NSF checks will be charged a $30 fee. Checks by mail are not an accepted form of payment. Any other form of payment, other than the listed acceptable payment methods are subject to an additional 3% buyer's fee on the full amount of the purchase. No items will be released until full payment clears our office.

Acceptable forms of payment:

• Bank Wire Transfer; please call for wire instructions to be emailed to you.
• Check delivered to our office that held the auction
• Check By Phone

West Fargo, Sioux Falls, Grand Forks 701-237-9173

Litchfield 320-693-9371

Mt. Pleasant, Ames 319-385-2000

• Check By Fax

West Fargo, Sioux Falls, Grand Forks 701-237-0976

Litchfield 320-693-9373

Mt. Pleasant, Ames 319-385-4709

Sales Tax

ALL APPROPRIATE STATE SALES TAX LAWS APPLY PER THE LOCATION OF POSSESSION AND SELLER TYPE OF THE PIECE OF EQUIPMENT.

Listed below is a link for the Streamlined Tax Exemption form that includes 24 participating states. States that do not participate in the streamlined form, but in which Steffes Group frequently transacts business are MO and IL. Please contact our office if you would like us to send you a form for one of these states. The link for the streamlined form includes the states of IA, MN, ND, NE, and SD, among others.

Streamlined Sales Tax Agreement Certificate of Exemption

If you have any questions concerning sales tax, please contact the appropriate state government agency for that location or contact our office. Minnesota requires sales tax to be charged on all online consignment auctions unless the buyer provides an exemption form. 

ND Dakota titled vehicles

Per North Dakota vehicle and sales tax laws, upon registration and licensing of any titled vehicle or trailer, any buyer’s premium paid is considered to be part of the sales price. Sales tax will be charged by the State of North Dakota on the entire sales price (including buyer’s premium) for any vehicle registered in North Dakota. 

If you have any questions concerning sales tax on a piece of equipment, please contact the appropriate state government agency at the location of the item on auction. 

ND Sales Tax Terms for Canadian Customers

 Used Farm Equipment

The sale, at auction, of used farm machinery to a Canadian farmer for agricultural use is exempt from sales tax the same as a North Dakota Farmer.

The purchase, at auction, of used farm machinery by a Canadian farm equipment dealer (retailer) would be sales taxable unless:

• You complete an exemption certificate with a ND sales tax permit number
• The purchased goods are shipped by a 3rd party to you in Canada - in this case a delivery receipt must be provided to Steffes Group.

 New Farm Equipment

The sale, at auction, of new farm machinery to a Canadian farmer for agricultural use, or a Canadian farm equipment dealer (retailer) is taxable at the current state rate of 3% plus any local sales tax if applicable.  The law also provides that Canadians may apply for a refund of the tax paid when meeting certain requirements.  This form and conditions of use are available online at http://www.nd.gov/tax/salesand%20use/canrefund/. 

Agents for Sellers
Steffes Group, Inc. and its Employees act merely as agents for sellers. All auctions are with reserve unless specifically stated otherwise. Auctions are with undisclosed reserves unless advertised otherwise as "Absolute."  Auctioneers, at their discretion, may place a reserve bid on behalf of the seller. All final bids are subject to the seller's confirmation. Only the top bidder will be contacted as to the status of his/her bid. While the information we provide on item(s) is deemed correct, no warranties are expressed or implied as to any items being sold, and you agree to purchase and accept the item in an as-is condition. Information on items is obtained by us from the sellers and you hereby agree to hold harmless Steffes Group and our Employees for any errors or omissions regarding the item(s) being sold. This information includes but is not limited to year, model, machine or engine hours, physical condition, options, features and other data pertinent to the value of the item. All items are sold As-Is-Where-Is unless specific factory or seller issued warranties are listed in the item description.

Inspection

You acknowledge that you have the right and responsibility to inspect the item(s) personally, or to have a third party representative inspect the item(s) for you. That by bidding on an item you have agreed to accept that item in its present condition at its present location and with the description provided whether accurate or not. 

Auction Close

Timed-online auctions will begin to close on the date and time listed. Lots will remain open until no bids have been placed within the last 4 minutes. Timed-online auctions normally close at a rate of 3 lots every 2 minutes.  

Please note that some lots can be tied together and will be set to close simultaneously.  This will be indicated in those lots by a paper clip symbol.  Please hover your mouse over the symbol to see what lots are tied together. The paper clip symbol means that each lot tied will stay in extension until there are no more bids on any of the lots that are tied.

         Steffes Group reserves the right to close multiple lots per minute at its discretion. Upon your accepted bid of an item, that item shall immediately become your responsibility and be at your risk (whether you have paid for that item or not). You agree that Steffes Group, its employees, and its sellers are not responsible for lost, stolen or damaged items and will not reimburse or discount items for any type of loss. Buyers are responsible for any costs incurred to prepare your item(s) for transport and/or shipping. This includes, but is not necessarily limited to, the cost of any rigging, dis-assembly, special loading requirements, transport, packaging, insurance, and all other costs related to physical transfer of your item(s). You agree to remit payment and remove from the auction property any purchases within the stated time for the auction being conducted. You further understand and agree that failure to remove items in the stated time for the auction will subject you to moving and storage fees unless arrangements have been made with the seller. 

Buyer Default

When using our online auction services you are making a firm commitment to purchase said item(s) and are entering into a legal and binding contract. Bids may not be cancelled or retracted for any reason. 

Non-paying bidders or fraudulent bidding will subject you to legal recourse and possible criminal charges including any fraud and/or interstate commerce violations. 

Internet Risk

You acknowledge that the internet may be an unreliable and error-prone network. Steffes Group will not guarantee that bids placed online will always be transmitted to or received by the auctioneer in a timely fashion. You agree to hold Steffes Group, Inc. and its employees harmless for any interruptions in online bidding. At the sole discretion of the Company, the auction may be suspended, postponed, or cancelled if internet service is unstable or disrupts the online portion of any event that is simulcast as an Internet Auction. 

Further, the auctioneer has the sole discretion to accept or refuse any bid. Steffes Group retains the right, at our sole discretion, to add, delete, or change some or all of our online services and the terms and conditions governing their online auctions at any time without notice. 

Abandonment Policy

Steffes Group provides this Abandonment Policy to inform you of our policies and procedures regarding any purchased item(s)/property that has not been removed by a buyer in a timely manner. Upon winning the bid for an item(s), after paying for item(s) purchased, a buyer is obligated to remove the item(s) from the auction site within a timely manner. 

Steffes Group may deem a buyer's failure to claim and remove equipment within 60 days following the close of an auction as evidence of buyer's intention to abandon the property. In these instances, the Company may take action that is adverse to buyer's interest in the property, including, but not limited to steps to dispose of the property. 

Disposition of property may include a variety of approaches based upon the buyer's purchase price of the property as follows: 

1) For those items with a final selling price of $5,000 or less, the Company will determine the appropriate disposition approach which may include:

• Removing and disposing as the Company sees fit.
• Allowing seller to retain or scrap.
• Sell the item(s), whereby the Company will remit the sales proceeds to the buyer, less selling and advertising expenses, storage costs, plus 20% administrative fee. 

2) For those items with a final selling price of greater than $5,000, Steffes Group may remove the item from the selling location and resolve as follows:

• The Company may reimburse the seller on the buyer's behalf for storage fees of $25 per day, with the total amount not to exceed $1,500.
• Sell the item(s), whereby the Company will remit the sales proceeds to the buyer, less selling and advertising expenses and storage costs, plus 20% administrative fee. 

If a buyer with the winning bid has not removed the purchased item(s) from selling location within 10 business days after the close of the auction, the buyer will be responsible for directly paying the seller any and all storage fees if levied by the seller. If levied by the seller, storage fees will be $25 per day beginning the 10th day after the close of the auction/winning bid.

AGIRON WEST FARGO EVENT

LOCATION:  Red River Valley Fairgrounds, 1805 Main Ave W, West Fargo, ND.  Take exit 343 from I-94 W.

AUCTIONEER’S NOTE: Auctioneers will run two rings with live online bidding. There will be no loading assistance until 12:00 PM. Cars and pickups may enter grounds at 11:00 AM for self-loading. Equipment removal by December 4, unless other arrangements are made. Hauling and loading are available. Contact auctioneers for owner information, new consignments, or changes at 701.237.9173 or 800.726.8609. Live online bidding available on major equipment.

Items highlighted in yellow are additions or changes from original posting.

TRACK TRACTORS

2012 Case-IH 600 Quadtrac, luxury susp. cab, powershift, 4 hyd., high cap. hyd. pump, power beyond, 1000 PTO, integrated auto steer, Pro 700 display, 372 RTK receiver, high cap. axles, front & rear diff lock, front & rear HID lights, cold weather kit, front bumper weight, tow hitch, 30" tracks, 4,725 hrs., S/NZBF128051

2000 John Deere 9400T, CAH, 24 spd. powershift, 4 hyd., 4,210 hrs., New motor, tracks, & rollers, S/NRW9400T900567 Click Here for Work Orders

4WD TRACTORS

2012 John Deere 9560R, CAH, 18 spd. powershift, 3 hyd., return flow, power beyond, front suitcase & wheel weights, tow cables, 710/70R42 tires, 5,380 hrs., S/N1RW9560RTCED003033

2002 John Deere 9520, deluxe cab, active seat, Field Office, powershift, Field Cruise, 5 hyd., power beyond, air seeder pin hookup, integrated auto steer, diff lock, rear weight pkg., 710/70R42 metric duals, shows 7,948 hrs., S/NRW952000P002238

1999 John Deere 9400, deluxe cab, Field Office, 24 spd., Field Cruise, 3 hyd., return flow, air seeder pin hookup, diff lock, outside weight pkg., 710/70R38 metric duals, shows 10,291 hrs., S/N20610

1998 John Deere 9400, 24 spd., 4 hyd., return flow, air seed hookup, diff lock, integrated auto steer, 710/70R38 duals, shows 12,454 hrs., approx. 1,500 hrs. on engine OH, S/NRW9400H011071

1997 John Deere 9400, deluxe cab, Field Office, 24 spd., Field Cruise, 4 hyd., power beyond, return flow, ATU steering wheel, air seeder pin hookup, diff lock, rear weight pkg., 710/70R42 metric duals, shows 7,116 hrs., S/N1069

1995 John Deere 8870, 12 spd. gear, 3 hyd., EZ-Steer guidance, 520/85R42 triples, 40% tread, 7,087 hrs., S/NRW8870S003210

1995 John Deere 8870, 4WD, 12 spd., 4 hyd., wired for John Deere ATU, 200 Series ATU, ITC receiver, diff lock, 620/70R42 duals, 80% tread, 8,195 hrs., S/NPW8870S003431

1992 John Deere 8760, 24 spd., 4 hyd., return flow, 3 pt., 1000 PTO, ATU steering wheel, diff lock, 20.8-42 press steel duals, shows 8,400 hrs., S/N5283

MFWD & 2WD TRACTORS & LOADERS

2007 John Deere 8230, MFWD, IVT, deluxe cab, buddy seat, active seat, 1300 front axle, 5 hyd., return flow, 60 gpm pump, 3 pt., quick hitch, 1000 PTO, integrated auto steer, AgJunction Outback auto steer, radar, electric mirrors, Xenon lights, (12) front weights, front fenders, wide coverage rear fenders, 320/85R38 front tires, 320/90R54 rear duals, 4,450 hrs., S/NRW8230D015005

John Deere 4030, CAH, 16 spd., 2 hyd., 3 pt., 540/1000 PTO, 18.4-34 tires, 6,287 hrs., S/N4030H008863R

1967 John Deere 4020, cab, diesel, syncro, 2 hyd., 3 pt., 540/1000 PTO, John Deere 158 hyd. loader, 18.4R34 tires, 8,510 hrs., S/NT213R150284R

John Deere 4020, open station, gas, 3 pt., PTO, fenders

1961 John Deere 2010, gas, open station, 1 hyd., non-factory 3 pt., 540 PTO, standard front end, Leon hyd. loader, 13.9-36 tires, hrs. unknown

COMBINES

2012 John Deere S680, Contour-Master, PRWD, premium cab, deluxe controls, ProDrive, 5 spd. feeder house, GS3 7" display, integrated auto steer, diff lock, power fold hopper w/Maurer hopper ext., 26' high cap. unloading auger w/Lankota ext. for 45' heads, electric mirrors, PowerCast tailboard, Custom Cutter ext. wear pkg., HID lights, hopper/rear cameras, rear hitch, LSW1250/35R46 front tires, 750/65R26 rear tires, 1,665.1 sep. hrs., 2,360.1 engine hrs., extensive reconditioning, less than 30 hrs. on complete inside rebuild front to back, New left hand final drive, work orders available, S/N1H0S680SVC0746493 Click Here for Work Orders

2012 Case-IH 8230, axial flow, 2WD, AFX rotor, Field Tracker, deluxe controls, Pro 700 display, integrated auto steer, No Nav II controller or receiver, power fold hopper ext., rock trap, chopper, high cap. lift cylinders, HID lights, round bar concaves, 620/70R42 duals, 750/65R26 rear tires, 1,307 sep. hrs., 1,727 engine hrs., rotor & cone recently replaced with ext. wear, S/NYCG215111

2012 Case-IH 8230, axial flow, 2WD, deluxe controls, Power Plus CVT, cloth seat, buddy seat, auto steer ready, Y&M ready, AFX rotor, Field Tracker, manual hopper ext., 28' unloading auger, rock trap, fine cut chopper, 520/85R42 duals, 750/65R26 rear tires, 1,631 sep. hrs., 2,126 engine hrs., rotor rebuilt and balanced by Larson's Welding with new rasp bars and transition cone at 1,231 sep. hrs., S/NYCG217211

2011 Case-IH 8120, axial flow, deluxe cab, Field Tracker, rock trap, chopper, 26' unloading auger, 18.4-42 straddle duals, 16.9-28 rear tires, 2,525 sep. hrs., S/NYBG213655

2011 John Deere 9870, deluxe cab, Contour-Master, 2WD, 5 spd. feeder house, ProDrive, TouchSet, integrated auto steer, 26' high cap. unloading auger, fine cut chopper, 520/85R42 straddle duals, 26L rear tires, 1,460 sep. hrs., 1,915 engine hrs., S/N741655

1991 Gleaner R60, hydro, Sunnybrook enclosed rotor, Ag Leader yield monitor, feeder house reverser, rock door, header height control, chopper, 30.5-32 single tires, 2,538 sep. hrs., 3,765 engine hrs., S/N16901

1979 John Deere 8820, AHH, fore/aft, A/C, hopper ext., 30.5-32 tires, 6,298 hrs., S/N364490H

FLEX DRAPER HEADS

2018 John Deere 645 flex draper head, 45', fore/aft, flipover reel, double knife, stubble lights, return to height in rigid mode, S/N800212

(2) 2017 Case-IH 3162 flex draper heads, 45’, flip over reels, stubble lights, S/NYHH051313, S/NUHH051311

2015 Case-IH 3162 flex draper head, 40', fore/aft, poly skids, S/NYFH050623

2014 Case-IH 3162 flex draper head, 40', fore/aft, Crary Wind system, factory transport, S/NYEH0401866

2014 John Deere 640FD flex draper, 40’, fore/aft, poly tine pickup reel, dual knife drive, S/N1H0640FDTE0765865

2012 John Deere 640FD flex draper, 40’, fore/aft, poly tine pickup reel, dual knife drive, S/N1H0640FDFDJC0746461

2012 John Deere 640FD flex draper, 40', fore/aft, poly tine pickup reel, dual knife drive, return to height in rigid mode, S/N1H0640FDTC074610

(2) 2011 MacDon FD70 flex drapers, 40’, fore/aft, flip over reel, multi-point hookup, Case-IH adapter, slow speed transport, S/N214064, S/N207474

2011 John Deere 635D draper head, 35', poly tine pickup reel, cutter bar w/full width skid shoes, fore/aft, factory road transport w/lights, S/N1H00635DPB0740237

2011 John Deere 640 flex draper head, 40', fore/aft, return to height in rigid mode, poly bottom, S/N740871

2011 MacDon FD70 flex draper, 45', dual drive, finger reel, hyd. fore/aft, gauge wheels, Flagship adapter, S/N208902

FLEX HEADS

2010 John Deere 635F flex head, 35', fore/aft, Crary wind bar, low dam, S/N736614

2009 John Deere 635F flex head, 35', fore/aft, stubble lights, high dam, S/N731098

2009 John Deere 635F flex head, 35', low dam, finger reel, hyd. fore/aft, AHH, contour shafts, stubble lights, long poly snouts, single pt. hookups, S/N1H00635F730538

(2) 2009 John Deere 635F HydraFlex heads, 35’, fore/aft, header height control, full finger auger, Crary Wind systems, S/NH00635F730819, S/NH00635F731037

2008 Claas F540 flex head, 40', finger reel, poly, hyd. fore/aft, S/N44100512

2001 John Deere 930F flex head, 30', Crary air reel, finger reel, hyd. fore/aft, full finger auger, AHH, good poly, long poly snouts, contour shaft drives, multi-pt. hookups

2000 John Deere 930F flex head, 30', full finger auger, poly, single pt. hookups, S/NH00930F686709

CHOPPING CORN HEADS

2018 Case-IH 4418 chopping corn head, 18x22”, hyd. deck plates, knife rolls, poly snouts, stubble lights, S/NYJH633283

2014 John Deere 616 chopping corn head, 16x30", hyd. deck plates, knife rolls, stubble lights, outer gathering ext., S/N765108

2014 John Deere 618C chopping corn head, 18x22", hyd. deck plates, knife rolls, stubble lights, outer gathering ext., S/N765210

2014 John Deere 608C chopping corn head, 8x30”, hyd. deck plates, knife rolls, RowSense, stubble lights, S/N1H00608CEEC765512

2013 John Deere 612C chopping corn head, 12x30", RowSense, AHH, hyd. deck plates, knife rolls, outer gathering ext., stubble lights, single pt. hookup, S/N1H00612CCDC755982

2012 John Deere 612C chopping corn head, 12x30", hyd. deck plates, knife rolls, stubble lights, outer gathering ext., S/N745540

2012 John Deere 612C chopping corn head, 12x30", RowSense, AHH, hyd. deck plates, knife rolls, outer gathering ext., stubble lights, single pt. hookup, S/N1H00612CKCC745455

2011 John Deere 608C chopping corn head, 8x30", hyd. deck plates, knife rolls, stubble lights, poly snouts, outer gathering ext., S/N740607

2010 Drago N12TR chopping corn head, 12x30", poly points, auto header height, S/N258510

2008 Geringhoff RD800 Rota Disc chopping corn head, 8x30”, knife rolls, hyd. deck plates

PICKUP HEAD & OTHER HEADS

2012 Case-IH 3016 pickup head, 15', wind screen, large flotation tires, single pt. hookups, set up for Flagship combine, S/NYCS026457

John Deere 922 head, 12x22", sunflower pans

Universal edible bean pickup head, screen bottom, John Deere 00/10 Series hookups

HEADER TRAILERS

(2) 2019 Industrias America 838 header trailers, 38', 6-wheel, rear torsion axles, electric brakes, lights, S/N4843, S/N3777

Russ Mfg. tandem axle bumper hitch double header trailer, fits (2) 30' rigid heads, No title

Klugman header trailer, 35', 4-wheel, ext. hitch

Industrias America header trailers, asst. sizes and configurations, New

1999 Hart single axle header trailer, 30', single pole, sickle storage, S/NHT91299

Elmers single axle header trailer, 30', single pole, flex bar

Header trailer, 30', 4-wheel, Minnesota 10 ton running gear

Unverferth HT30 header trailer, 4-wheel

GRAIN CART & GRAVITY BOX

Brent 610 grain cart, roll tarp, 24.5-32 tires, 1000 PTO, New gear box & flighting in 2019

Minnesota 260 gravity wagon on Minnesota 14 ton 4-wheel running gear, ext. hitch, 10:00-20 tires on 8-bolt hubs

AIR DRILLS

2012 John Deere 1890 air seeder, 60', 7-1/2" & 15" spacing, full run monitor, single shoot, seed firmers, ext. wear boots, 4" gauge wheels, 2012 John Deere 1910 tow-behind 430 bu. 3-compartment commodity cart, 12" hyd. fill conveyor, walking tandems on front of cart, 16.1L-16.5 front tires, 480/80R42 duals, New discs & seed firmers on back gang, front discs at 85%, cart S/N1A81910HACG745425, drill S/N1A81890CCCF745303

2006 John Deere 1890 air drill, 42-1/2', 7-1/2" & 15" spacing, (1) blockage sensor per tower, seed firmers, cast closing wheels, 2006 John Deere 1910 tow-behind twin compartment 270 bu. commodity cart, variable rate, mechanical drive, dual front caster wheels, 30.5R32 tires

Concord 3310 hoe drill, 33', 10" spacing, dual bin air cart, 200 bu. cap. (120/80), rear electric winch, all tires and hyd. hoses replaced within the last few years, hyd. fill auger w/hopper bottom ext., NH3 hardware included

Flexi-Coil 5000 air seeder, 33', 7.4" spacing, full floating hitch, single shoot, steel packer, 2320 tow-behind commodity cart, 230 bu., vari-rate, hyd. fill auger, 23.1-26 rears, Dutch openers, cart S/NR065071, S/N59920

PLANTER

White 5100 planter, 12x30", wing fold, ground drive, liquid fertilizer, drawbar hitch, hyd. pump, Agco monitor, soybean & medium corn plates

TILLAGE EQUIPMENT

2008 John Deere 2210 field cultivator, 65', 9" space, 5-section fold, AccuDepth, full floating hitch, walking tandems across, knock-on 9" sweeps, John Deere 3-bar harrow, S/NN02210XD06292

2009 John Deere 2410 chisel plow, 43', single pt. depth, Summers 106 3-bar harrow, S/NN02410X010104

Steiger Digger Disk coulter chisel, 16', 13 shank, 15" space, spring cushion front disc gangs, 3-1/2" twist shovels, single wheels, Summers HD 3-bar harrow

SPREADERS & SPRAYER

2012 Ag Chem TerraGator 9300, 400 hp., Falcon II display, 4-compartment bin, 70’ AirSpread booms

2006 Case-IH FLX4510 floater, 70’ booms, FlexAir 810 3-compartment bin, Raven Viper Pro monitor, 54/31R26 front tires, 1050/50R32 rear tires, 4,225 hrs., S/NY5T020419

2005 Summers Ultimate NT sprayer, 110', 1,500 gal. poly tank, rinse tank, hyd. drive pump, tank rinse nozzles, induction cone, triple nozzle bodies, Raven 440 control, 5-section, auto rate, adj. axles, 14.9R46 singles, S/NE0714

SLEEPER SEMI TRACTORS

2016 Kenworth W900 tandem axle, 60" Aerocab flat top sleeper, ISX Cummins 15L, 550 hp., performance enhanced, Eaton 18 spd., engine brake, air susp., air slide 5th wheel, cruise, Legacy leather seats, power windows & locks w/key fob, full gauge pkg., 7" color touchscreen w/radio & Navigation, Bluetooth phone, Wi-Fi capable, 110v power inverter, refrigerator, dual SS air cleaners & exhaust, dual painted aluminum fuel tanks, painted deep drop visor, ProTech aluminum toolbox step, Esper & Wabasto aux. heaters, 292" WB, 3:25 ratio, Minimizer individual full poly fenders, 275/80R22.5 tires, aluminum rims, 386,161 miles Click Here for Work Orders

2007 Kenworth T800 tandem axle, 72" Aerocab sleeper, ISX Cummins, Eaton 13 spd., engine brake, air susp., air slide 5th, cruise, diff lock, dual exhaust, dual 150 gal. aluminum fuel tanks, 3.36 rears, 11R22.5 tires on aluminum rims, 1,023,000  miles, New turbo, air charge cooler, king & spring pins, New water pump & crank shaft damper, recent overhead adj. & alignment

2006 Kenworth T600 tandem axle, 60" sleeper, C15 Cat, 475 hp., Eaton 13 spd., engine brake, air susp., cruise, diff lock, 3:36 rears, 11R22.5 tires on aluminum rims, 1,060,000 miles

1999 Freightliner Century tandem axle, 60" sleeper, N14 Cummins, 10 spd. autoshift, engine brake, air susp., air slide 5th, cruise, diff lock, poly full fenders, 11R24.5 tires on aluminum rims, 927,307 miles, New radiator, starter & batteries in 2019

1999 Freightliner Century Class tandem axle conventional, integral sleeper, M11 Cummins, 10 spd., engine brake, air ride susp., fixed 5th wheel plate, twin aluminum fuel tanks, 210" WB, 11-22.5 tires on aluminum rims, miles unknown, electronic dash not working

DAY CAB SEMI TRACTORS

(2) 2014 Caterpillar CT660S tri-axle, day cab, CT13 Cat, 475 hp., 6 spd. automatic, diff lock, wet kit, air lift self-steering 3rd axle, Hendrickson air lift susp., 248” WB, 13,200 lb. front, 46,000 lb. rear, aluminum wheels

2012 IHC ProStar tandem axle, day cab, MaxxForce, 10 spd., air ride susp.

2007 Freightliner tandem axle, factory day cab, Mercedes diesel, Eaton Fuller 10 spd., engine brake, air ride susp., air slide 5th, cruise, twin aluminum fuel tanks, 160" WB, 22.5 low pro tires on steel rims, shows 644,930 miles

2006 Freightliner Columbia tandem axle, day cab, C13 Cat, Eaton 10 spd., engine brake, air susp., air slide 5th, cruise, diff lock, dual aluminum fuel tanks, 11R22.5 tires on aluminum rims, 481,478 miles

2005 IHC 9200, day cab, ISX, 10 spd., air ride susp., fixed 5th wheel plate, 22.5 tires on steel rims, 598,000 miles

2002 Volvo, day cab, VED12 Volvo, 345 hp., 10 spd. manual, air ride cab & susp., cruise, diff lock, A/C, AM/FM/CD, dual aluminum fuel tanks, 3:70 ratio, wired for electric tarp and traps, 295/75R22.5 tires on steel rims

2001 Volvo, day cab, ISM Cummins, 330 hp., 9 spd. manual, air ride cab & susp., air slide 5th, cruise, diff lock, A/C, AM/FM/CD, dual aluminum fuel tanks, 4:11 ratio, wired for electric tarp and traps, 285/75R24.5 tires on steel rims

1999 Kenworth T800B tandem axle, day cab, M11-330 EPS Plus Cummins, 330 hp., Eaton Fuller RTL014610B 10 spd., engine brake, 8-bag air ride susp., wet kit, 170" WB, 12,000 lb. front, 40,000 lb. rear, DS404 rears, aluminum wheels, shows 503,627 miles, New tires

1996 IHC 9200 twin screw, day cab, M11 Cummins, 10 spd., air ride susp., sliding 5th wheel plate, (2) 100 gal. saddle tanks, Safe-T-Pull hitch, shorter wheel base, 22.5 tires on steel rims, 800,800 miles

1994 Freightliner FL112 tandem axle, day cab, 3406 Cat, DPF, Rockwell RM013145A 13 spd., engine brake, air ride susp., 138" cab to axle, 212" WB, 12,000 lb. front, 40,000 lb. rear, RT40140 rears, aluminum wheels, shows 579,086 miles

HOPPER BOTTOM TRAILERS

(2) 2013 Timpte Super Hopper tandem axle hopper bottoms, 42'x96"x72", ag hoppers, roll tarp, SS rear, air scale, 11R24.5 tires, outside aluminum rims

2012 Timpte Super Hopper tandem axle hopper bottom, 42'x96"x72", ag hopper, roll tarp, SS rear, air scale, 11R24.5 tires on steel rims

2012 Travalong aluminum hopper bottom, 40’x96”x68”, air ride, electric roll tarp & traps, sight glass, 11R24.5 tires on steel rims

2011 Timpte Super Hopper aluminum hopper bottom, 40'x96"x66", ag hoppers, air ride susp., single speed traps, (2) rows lights, 11-25.5 tires, aluminum outside rims

2001 Maurer tandem axle hopper bottom, 38', spring susp., roll tarp, 11R24.5 tires on steel rims

1992 Timpte aluminum hopper bottom, 42'x96"x72", spring susp., ag hoppers, power tarp & traps, steel rims

STEP DECK & DROP DECK TRAILERS

2017 Wilson CD1080 Roadbrute aluminum combo step deck, 53'x102", 11' top deck, sliding tandem axle, converts to spread axle, sliding winches, (2) aluminum storage boxes, 255/70R22.5 tires on aluminum tires

1995 Doonan tandem axle step deck, 48'x96", steel, air susp., sliding winches, 255/75R22.5 tires

2013 Kaufman tri-axle drop deck, 43-1/2', 5' flip-up ramps w/dovetail, spring ride, air brakes, (3) 22,500 lb. axles, 70,000 lb. GVWR

END DUMP, CURTAIN SIDE, & OTHER TRAILERS

1982 East tri-axle aluminum end dump, 34', spring susp., air lift pusher axle, combo end gate, roll tarp, poly liner, beet extension, 11R24.5 tires on steel rims, rebuilt end gate, one year on complete new brakes, drums, & S-cams

1991 Fruehauf curtain side spread axle, 48'x96", air susp.

2013 PJ tandem axle trailer, 20', 2' beavertail, spring susp., wood deck, wide flip up ramps, 2-5/16" ball hitch, 7,500 lb. axles, 235/85R16 tires on 8-bolt hubs

2012 Trail King tri-axle aluminum belt trailer, 50'x102"x78", 48" belt, front ladder, electric roll tarp, air ride susp., air lift 3rd axle, 11R22.5 aluminum disc wheels

2009 Haul tandem axle enclosed V-nose trailer, 14'x68", spring susp., curbside door, rear ramp door, in-floor tie downs, E-track in walls, 205/75R15 tires on 5-bolt hubs

Aluma tandem axle aluminum V-nose snowmobile trailer w/ramp, 3-place, 14', torsion susp., MN lifetime license

2004 insulated dry van trailer, 48’x102”, heater

1991 Fruehauf dry van, 48'x102", tandem axle slider, air susp., swing doors, air scale, 285/75R24.5 tires on steel rims 

1990 Kentucky tandem axle moving van, 48'x102", air susp., side doors, rear swing doors, 255/70R22.5 tires on steel rims

Steel Mfg. snow pusher, 14', JRB quick tach and bucket mounts, bolt-on cutting edge

Frontier snow pusher, 8', John Deere 600 Series loader mounts, spring trip cutting edge

1999 Red River tandem axle live bottom trailer, 48'x96"x96", spring susp., 54" belted chain, poly-lined slopes, New brakes & drums, 295/75R22.5 tires on steel pilot rims

Single axle dolly converter, spring susp., dual 295/75R24.5 tires on steel rims

BOX TRUCKS & VAN TRUCK

1984 Ford F600 single axle, 370 gas, 4 spd., 16' box, hoist, 156,000 miles, New wood box floor 2 yrs. ago, New starter & alternator

1976 Ford F900 tag tandem, 534 gas, 5&2 spd., 20' box, hoist, radio, 35,500 actual miles, tag axle needs repair

2012 Freightliner M2 single axle, 6.7L Cummins, Allison automatic, air ride seats & susp., 22’x8’x7’ high van body, rear hyd. lift, 336,000 miles, current DOT

PICKUPS

2002 Ford F150 Lariat, Super Crew cab, FX4, Triton 5.4L, automatic, 4WD, leather, power windows/locks, tow pkg., bed rails, tonneau cover, shows 223,610 miles, motor replaced in 2018 w/takeout motor that had 98,000 miles, approx. 105,000 miles on current motor

2002 Chevrolet 2500HD ext. cab, long box, 8.1L gas, rebuilt Allison automatic, 4WD, leather, spray-in bed liner, rails for 5th wheel, 5th wheel ball hitch, 265/75R16 tires, 157,000 miles

2000 Chevrolet 3500 dually, 4-door, 454, automatic, 2WD, A/C, 8' steel flatbed, 129,000 miles

1999 Dodge Ram 3500 dually, reg. cab, 5.9L Cummins, automatic, 2WD, 10' steel flatbed, 5th wheel ball & 2" receiver hitches, electric trailer brake, 149,000 miles

1990 Ford F150 XLT Lariat ext. cab, 5.8L EFI, automatic, 4WD, lockout hubs, power windows & locks, 8' box, 235/75R15 tires, 57,270 miles

1967 Chevrolet C10, 1/2 ton, V8 gas, 4 spd. manual, 2WD, 8' bed, 140,000 miles

HAY & LIVESTOCK EQUIPMENT

1993 Case-IH 8370 haybine, 14', hydraswing, rubber & steel crimpers, spare sickle, 540 PTO, 11L-15 tires, owner & repair manuals, S/NCFH0082194

Vermeer R23A hyd. twin rake

(16) NE Pipe & Panel freestanding buffalo panels, 5'x24', New

(90) NE Pipe & Panel continuous panels, 20', 6-bar, New

(30) NE Pipe & Panel interlocking portable corral panels, 10', New

AUGERS

2017 Westfield MKX 130-94 GULP2 low pro swing hopper auger, 94'x13", hyd. lift, 540 PTO, demo, S/N286823

2014 Wheatheart 130-114 low pro swing hopper auger, 114'x13", hyd. lift, 540 PTO, demo, S/N14727

2018 Batco 1575 belt conveyor, 75'x15", No hopper, No drive, on transport, New, S/N15-02207

2014 Wheatheart 130-74 low pro swing hopper auger, 74'x13", hyd. lift, 540 PTO,

demo, S/N16052

2014 Westfield TFX 08-31 self-propelled loadout auger, 31'x8", on transport, New, S/N262639

Westfield TR10-61 auger, hyd. swing hopper, 540 PTO

Mayrath loadout auger, 40'x6", motor mount less motor, on transport

Superior premium unload auger, power sweep w/Block Buster, fits 18' bin, aged inventory

Superior unload auger, power sweep, fits 21' bin, aged inventory

Superior unload auger, fits 21' bin, aged inventory

CONVEYORS

2018 Westfield WCX1590 belt conveyor, No hopper, No drive, on transport, New, S/N289226

2018 Westfield WCX1535 FLTD belt conveyor, 35'x18", on transport, New, S/NWCX-000031

2017 Batco FX2045 FL belt conveyor, 35 hp. gas engine, on transport, New, S/N20-00106

Batco 1535 belted conveyor, 35'x15", 7.5 hp. electric motor, 1 phase, long hopper

Batco 1535 belted conveyor, 35'x15", 7.5 hp. electric motor, 1 phase, long hopper

Batco 1314 jump conveyor, 14'x13" tube, truck unloader hopper, Honda gas motor, transport wheels

Stainless steel conveyor, 32'x16"

Roll of 18" rubber conveyor belting, off Batco conveyor, approx. 100'

AERATION & BIN EQUIPMENT/PARTS

(2) Butler aeration fans, 18", 220v, 12" transition

Butler aeration fan, 18", 220v

(2) Low speed centrifugal fans, 10 hp., 1 phase, 230v, reconditioned

Full floor aeration bin floors, 10’ planks, aged inventory: (2) 18'; (2) 21’; (2) 24’; (2) 27’

Full floor aeration floor, for 36' bin, full length planks, .05 perforated floor, aged inventory

(40) Eaton 10 hp. starters, aged inventory

Superior unload tube, fits 21' bin, aged inventory

(60) WEG 7-1/2 hp. starters, aged inventory

(2) Westfield USP1005 utility auger extensions w/flighting