2016 Bandit Beast 4680T Horizontal Grinder
Previous Page Listing ID#: 1620293

Auction Location

Wheaton, MD 20902
Auction Dates and TimesSALE IS COMPLETED
Bidding Starts: Wednesday May 8, 9:00 AM
Bidding Ends: Wednesday May 22, 8:00 PM
Auction Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
GovDeals, Inc.

Contact: Angela Jones
Phone: 800-613-0156
Website: www.govdeals.com

GoToAuction.com ID#: 10047
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Video
Listing Information

This heavy equipment auction is being held online on GovDeals.

Auction #3771-49, ending 5/22/2024. 

To see full details, additional photos and current bid, please use this link - https://govdeals.bid/3JUOFxM

 

 

 

2016 Bandit Beast 4680T Horizontal Grinder

 

This machine has a 60-tooth mill with a CAT C32 1200hp powering it.

 

This machine comes with a CAT 325 under carriage with rubber track pads installed, Ansul wet chemical fire suppression system, and the rapid advanced feeding technology.

 

We have recently replaced a lot of major components such as: secondary and primary discharge conveyor belts, CAT to Bandit communication harnesses, and upgraded infeed drive motor and gear box.

 

The clutch was replaced at 5404 machine hours which included a new clutch pack, idler gear, pump drive gears, oil pump, drive coupler, clutch drive sheave, drive belts, and the clutch oil tank was sent out to be cooked/ cleaned.

 

Disclaimer: The machine has a slight vibration coming from it, as we believe the mill shaft will need to be replaced.

 

With a CAT® 325EL steel-track undercarriage with 700mm wide triple-grouser pads, the Beast® Model 4680XP Track is the ultimate self-propelled horizontal grinder. This no-compromise recycling monster delivers engine options to 1,200 horsepower and a huge 45-inch by 60-inch mill opening—there isn’t another horizontal grinder on the market that can match the Model 4680XP Track when it comes to production, performance and mobility. Whether turning large piles of waste wood into larger mulch piles, processing bulky chunk wood, cleaning up storm damage and debris after natural disasters, or creating chips for fuel wood markets, the Model 4680XP Track is simply unstoppable.

The heart of the Model 4680XP Track is its patented 60-tooth cutter mill. The Beast mill turns down, processing material at the base as opposed to fighting against gravity at the top. The mill is designed to processes material with more of a cutting action, delivering greater machine efficiency while producing a high-quality end-product. A very broad range of tooth and screen options are available to fine-tune the end-product for specific markets. An optional add-on Colorizer unit allows one-pass production of top-quality color-enhanced mulch for landscaping.

 

Engine:

CAT C-32, 1,200 horsepower

Exhaust silencer mufflers

Flex-Aire Auto Reverse Cooling Fan

PT-Tech hydraulic clutch

500-gallon fuel tank

Fire suppression system

Electric over hydraulic auto-stop controls

 

Clutch:

Pt Tech HPTO15FX

Clutch hours- 315

 

Grinder specs: 

​59 ½” diameter cut radius

Debris augers

63” wide cutter mill

Full function radio remote control

36” x 60” top feed wheel

16’ 5” long x 60” wide slat design track-type in-feed conveyor

Auto – reverse feed system

CAT 325 EL undercarriage

Cutter-bodies with replaceable raker holder

XT carbide forged splitter fan teeth

XT short shingle teeth

10’ long x 56” wide primary discharge conveyor

25’6” two-speed, height adjustable secondary discharge conveyor, with magnetic head pulley

 

 

 

This machine is being sold "as is, where is".

 

 

 

 

 

***GovDeals.com - Bid on Government Auctions to buy Government Surplus.***

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend







Sponsored Links

2016 Bandit Beast 4680T Horizontal Grinder

GovDeals, Inc.

GovDeals, Inc.


Contact: Angela Jones
Phone: 800-613-0156
Sale Location
See auction page
Wheaton, MD 20902
Sale Dates and Times
Sale Terms and Conditions

Listing Details

This heavy equipment auction is being held online on GovDeals.

Auction #3771-49, ending 5/22/2024. 

To see full details, additional photos and current bid, please use this link - https://govdeals.bid/3JUOFxM

 

 

 

2016 Bandit Beast 4680T Horizontal Grinder

 

This machine has a 60-tooth mill with a CAT C32 1200hp powering it.

 

This machine comes with a CAT 325 under carriage with rubber track pads installed, Ansul wet chemical fire suppression system, and the rapid advanced feeding technology.

 

We have recently replaced a lot of major components such as: secondary and primary discharge conveyor belts, CAT to Bandit communication harnesses, and upgraded infeed drive motor and gear box.

 

The clutch was replaced at 5404 machine hours which included a new clutch pack, idler gear, pump drive gears, oil pump, drive coupler, clutch drive sheave, drive belts, and the clutch oil tank was sent out to be cooked/ cleaned.

 

Disclaimer: The machine has a slight vibration coming from it, as we believe the mill shaft will need to be replaced.

 

With a CAT® 325EL steel-track undercarriage with 700mm wide triple-grouser pads, the Beast® Model 4680XP Track is the ultimate self-propelled horizontal grinder. This no-compromise recycling monster delivers engine options to 1,200 horsepower and a huge 45-inch by 60-inch mill opening—there isn’t another horizontal grinder on the market that can match the Model 4680XP Track when it comes to production, performance and mobility. Whether turning large piles of waste wood into larger mulch piles, processing bulky chunk wood, cleaning up storm damage and debris after natural disasters, or creating chips for fuel wood markets, the Model 4680XP Track is simply unstoppable.

The heart of the Model 4680XP Track is its patented 60-tooth cutter mill. The Beast mill turns down, processing material at the base as opposed to fighting against gravity at the top. The mill is designed to processes material with more of a cutting action, delivering greater machine efficiency while producing a high-quality end-product. A very broad range of tooth and screen options are available to fine-tune the end-product for specific markets. An optional add-on Colorizer unit allows one-pass production of top-quality color-enhanced mulch for landscaping.

 

Engine:

CAT C-32, 1,200 horsepower

Exhaust silencer mufflers

Flex-Aire Auto Reverse Cooling Fan

PT-Tech hydraulic clutch

500-gallon fuel tank

Fire suppression system

Electric over hydraulic auto-stop controls

 

Clutch:

Pt Tech HPTO15FX

Clutch hours- 315

 

Grinder specs: 

​59 ½” diameter cut radius

Debris augers

63” wide cutter mill

Full function radio remote control

36” x 60” top feed wheel

16’ 5” long x 60” wide slat design track-type in-feed conveyor

Auto – reverse feed system

CAT 325 EL undercarriage

Cutter-bodies with replaceable raker holder

XT carbide forged splitter fan teeth

XT short shingle teeth

10’ long x 56” wide primary discharge conveyor

25’6” two-speed, height adjustable secondary discharge conveyor, with magnetic head pulley

 

 

 

This machine is being sold "as is, where is".

 

 

 

 

 

***GovDeals.com - Bid on Government Auctions to buy Government Surplus.***

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
2016 Bandit Beast 4680T Horizontal Grinder
 Online Only Auction
Auction Date(s)
Bidding Starts: Wednesday May 8 , 9:00 AM
Bidding Ends: Wednesday May 22 , 8:00 PM
Auction Location

Wheaton, MD 20902
Company
GovDeals, Inc.

Contact: Angela Jones
Phone: 800-613-0156
Website: www.govdeals.com

This heavy equipment auction is being held online on GovDeals.

Auction #3771-49, ending 5/22/2024. 

To see full details, additional photos and current bid, please use this link - https://govdeals.bid/3JUOFxM

 

 

 

2016 Bandit Beast 4680T Horizontal Grinder

 

This machine has a 60-tooth mill with a CAT C32 1200hp powering it.

 

This machine comes with a CAT 325 under carriage with rubber track pads installed, Ansul wet chemical fire suppression system, and the rapid advanced feeding technology.

 

We have recently replaced a lot of major components such as: secondary and primary discharge conveyor belts, CAT to Bandit communication harnesses, and upgraded infeed drive motor and gear box.

 

The clutch was replaced at 5404 machine hours which included a new clutch pack, idler gear, pump drive gears, oil pump, drive coupler, clutch drive sheave, drive belts, and the clutch oil tank was sent out to be cooked/ cleaned.

 

Disclaimer: The machine has a slight vibration coming from it, as we believe the mill shaft will need to be replaced.

 

With a CAT® 325EL steel-track undercarriage with 700mm wide triple-grouser pads, the Beast® Model 4680XP Track is the ultimate self-propelled horizontal grinder. This no-compromise recycling monster delivers engine options to 1,200 horsepower and a huge 45-inch by 60-inch mill opening—there isn’t another horizontal grinder on the market that can match the Model 4680XP Track when it comes to production, performance and mobility. Whether turning large piles of waste wood into larger mulch piles, processing bulky chunk wood, cleaning up storm damage and debris after natural disasters, or creating chips for fuel wood markets, the Model 4680XP Track is simply unstoppable.

The heart of the Model 4680XP Track is its patented 60-tooth cutter mill. The Beast mill turns down, processing material at the base as opposed to fighting against gravity at the top. The mill is designed to processes material with more of a cutting action, delivering greater machine efficiency while producing a high-quality end-product. A very broad range of tooth and screen options are available to fine-tune the end-product for specific markets. An optional add-on Colorizer unit allows one-pass production of top-quality color-enhanced mulch for landscaping.

 

Engine:

CAT C-32, 1,200 horsepower

Exhaust silencer mufflers

Flex-Aire Auto Reverse Cooling Fan

PT-Tech hydraulic clutch

500-gallon fuel tank

Fire suppression system

Electric over hydraulic auto-stop controls

 

Clutch:

Pt Tech HPTO15FX

Clutch hours- 315

 

Grinder specs: 

​59 ½” diameter cut radius

Debris augers

63” wide cutter mill

Full function radio remote control

36” x 60” top feed wheel

16’ 5” long x 60” wide slat design track-type in-feed conveyor

Auto – reverse feed system

CAT 325 EL undercarriage

Cutter-bodies with replaceable raker holder

XT carbide forged splitter fan teeth

XT short shingle teeth

10’ long x 56” wide primary discharge conveyor

25’6” two-speed, height adjustable secondary discharge conveyor, with magnetic head pulley

 

 

 

This machine is being sold "as is, where is".

 

 

 

 

 

***GovDeals.com - Bid on Government Auctions to buy Government Surplus.***