THIS IS A COMPLETED SALE
View current listings by this company

Lake Erie Equipment Auction Ring 2
Previous Page Listing ID#: 1567944

Auction Location
Middlefield, OH 44062

Auction Dates and TimesSALE IS COMPLETED
Friday Nov 24, 2023 Completed

Auction Type
Live Auction

Company Information
Bright Star Realty and Auctions, INC Contact: Loren Beachy Phone: 574-825-0704 Email: beachyauctions@gmail.com Website: brightstarauctions.com GoToAuction.com ID#: 5286 View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area! You may set up alerts by area (zip and radius), keywords, and by company. It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Bidder Terms and Conditions There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items. These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid. “Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION. “Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids. “Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected. “Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder. “Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms. “Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer. "Buyer" means the Winning Bidder with respect to each Lot of Personal Property. "Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. “Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation. “Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer. “High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot. “High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price. “High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot. "Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event. “Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer. “No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale. “Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions. “Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online. "Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered. “Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers. “Personal Property” means all tangible and moveable property, including fixtures, designated as Property. “Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer. “Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer). “Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction. “Property” means the Real Property and the Personal Property. “Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction. “Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction. “Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE. “Reserve Price” means the minimum price that Seller is willing to accept for specific Property. “Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer. “Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid. “Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller). "Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid. “Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration. Governing Law. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online: Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Cash payments totaling Ten Thousand Dollars ($10,000) or more will not be accepted. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion. Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers. ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyer’s account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death. Insurance. Any work performed by Purchaser(s) or Purchaser Representative (including sub-contractors) shall be insured and provide proof of coverage against all claims for injuries against persons or damages to property which may arise from or in connection with the removal of items or equipment. Insurance coverage requirements are as follows: General Liability $1,000,000/$2,000,000 and Worker’s Compensation $1,000,000 or as required by State Law. Seller shall be listed as additionally insured, if required. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.

1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
2. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
3. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
4. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
5. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Cash payments totaling Ten Thousand Dollars ($10,000) or more will not be accepted. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.

Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyer’s account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Insurance. Any work performed by Purchaser(s) or Purchaser Representative (including sub-contractors) shall be insured and provide proof of coverage against all claims for injuries against persons or damages to property which may arise from or in connection with the removal of items or equipment. Insurance coverage requirements are as follows: General Liability $1,000,000/$2,000,000 and Worker’s Compensation $1,000,000 or as required by State Law. Seller shall be listed as additionally insured, if required.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.

Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Information
Bright Star is excited to provide a consignment auction to serve your area. Our goal is to provide sellers with an easy option to turn their unused equipment into cash. We provide cutting edge marketing to earn sellers top dollar for their equipment. Buyers can be expected to be treated fairly and with absolute transparency and integrity. We look forward to working with you. 00 Information Lot Accepting consignments of quality equipment! Specializing in all heavy equipment, including construction, excavating, sawmill, forestry, trucks and trailers. Call your auction agent today to capitalize on free marketing for your equipment. 00A Information Lot For onsite crowd only! Will be sold indoors. Selling Dewalt, Milwaukee, Makita cordless tools, and new knives. Also approx. 103 lots of toys. 01 Preview & Inspection Buyers are responsible to do their own inspection to determine the condition of the items they purchase. Inspections times are available as follows: Anytime during normal business hours. Monday-Friday 8 AM - 4 PM we will be closed Thursday 11/23/23 Thanksgiving Day. Location of Auction: 16989 Kinsman Rd., Middlefield, OH 44062 02 Loadout Information* All items must be paid for before removal. FREE loadout day of auction until 4 pm and Saturday Nov 25 from 8 AM to 1 PM and for 2 weeks following the auction M-F 8 AM to 4 PM. Starting Dec 13, by appointment and for a $25 per item loadout fee. Any items not removed in 30 days become the property of the auction company. Call Daniel Wengerd 440-636-3128 or email lakeerie@brightstarauctions.com 03 Payment Information Payment terms: 6.75% sales tax on equipment. Vehicle rate depends on where the buyer is located. But OH Buyers are exempt. 10% Onsite and 13% Online Buyer's Premium in effect for all purchases. Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. 92 CAT 555D Wheel Skidder 1:50 Scale Replica - Die Cast Metal Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 98 Heavy Equipment Key Set 36 Keys Shipping available for $20 99 Manual Sealless Steel Strapping Tool Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30 2000 New 40' High Cube Multi-Door Container 40', high cube, multi-door, shipping container, 4 side doors, end doors, 9'6'' high, 8' wide 2001 2023 New One-Trip 20' Standard Container SN: ZXJU0049496 2002 2023 New One-Trip 20' Standard Container SN: RXCU1026845 2002A 2023 New One-Trip 20' Standard Container* TGSU 226867 3 2002B 2023 New One-Trip 20' Standard Container* TGSU 226781 0 2003 New 1 Cubic Yard Stackable Self Dumping Hopper with Fork Pockets Contact Bronson with any questions 574-210-3721 2004 New 2 Cubic Yard Self Dumping Hopper with Fork Pockets Contact Bronson with any questions 574-210-3721 2005 New 2 Cubic Yard Self Dumping Hopper with Fork Pockets Contact Bronson with any questions 574-210-3721 2006 New 2 Cubic Yard Self Dumping Hopper with Fork Pockets Contact Bronson with any questions 574-210-3721 2007 New 3/8" AR500 Gong Shooting Target Contact Bronson with any questions 574-210-3721 2008 New 3/8" AR500 Gong Shooting Target Contact Bronson with any questions 574-210-3721 2009 New 2 Cubic Skid Steer Hopper with Fork Pockets Contact Bronson with any questions 574-210-3721 2010 New Welding Table with Shelf 30" x 57". Contact Bronson with any questions 574-210-3721 2011 New Welding Table with Shelf 30" x 57". Contact Bronson with any questions 574-210-3721 2012 New Welding Table with Shelf 30" x 57". Contact Bronson with any questions 574-210-3721 2013 New Welding Table with Shelf 30" x 57". Contact Bronson with any questions 574-210-3721 2014 New Welding Table with Shelf 30" x 57". Contact Bronson with any questions 574-210-3721 2015 New Welding Table with Shelf 30" x 57". Contact Bronson with any questions 574-210-3721 2016 New KC Work Bench 28" x 60". Contact Bronson with any questions 574-210-3721 2017 New KC Work Bench 28" x 60". Contact Bronson with any questions 574-210-3721 2018 New KC Work Bench 28" x 60". Contact Bronson with any questions 574-210-3721 2019 New 4 Cubic Yard Debris Box Contact Bronson with any questions 574-210-3721 2020 New 4 Cubic Yard Debris Box Contact Bronson with any questions 574-210-3721 2021 50 New Safety Cones Contact Daniel Miller with any questions 440-321-5965 2080A Southern Yellow Pine Fence Posts 6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2080B Southern Yellow Pine Fence Posts 6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2080C Southern Yellow Pine Fence Posts 6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2080D Southern Yellow Pine Fence Posts 6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2080E Southern Yellow Pine Fence Posts 6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2080F Southern Yellow Pine Fence Posts 6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2080G Southern Yellow Pine Fence Posts 6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2080H Southern Yellow Pine Fence Posts 6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2080I Southern Yellow Pine Fence Posts 6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2080J Southern Yellow Pine Fence Posts 6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2081 Southern Yellow Pine Fence Posts 3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2081A Southern Yellow Pine Fence Posts 3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2081B Southern Yellow Pine Fence Posts 3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2081C Southern Yellow Pine Fence Posts 3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2081D Southern Yellow Pine Fence Posts 3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2081E Southern Yellow Pine Fence Posts 3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2081F Southern Yellow Pine Fence Posts 3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2081G Southern Yellow Pine Fence Posts 3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2081H Southern Yellow Pine Fence Posts 3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2081I Southern Yellow Pine Fence Posts 3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2082A New Gates 16' x 50" 6 bar, 1 3/4" tubing with hangers. Contact Daniel Miller with any questions 440-321-5965 2082B New Gates 16' x 50" 6 bar, 1 3/4" tubing with hangers. Contact Daniel Miller with any questions 440-321-5965 2082C New Gates 14' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965 2082D New Gates 14' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965 2082E New Gates 12' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965 2082F New Gates 12' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965 2082G New Gates 10' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965 2082H New Gates 10' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965 2082I New Gates 8' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965 2082J New Gates 8' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965 2082K New Gates 6' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965 2082L New Gates 6' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965 2082M New Gates 4' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965 2082N New Gates 4' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965 2083 Larch Fence Posts (35) 5 1/2" x 5 1/2" x 8'. Contact Daniel Miller with any questions 440-321-5965 2083A Larch Fence Posts (35) 5 1/2" x 5 1/2" x 8'. Contact Daniel Miller with any questions 440-321-5965 2083B Locust Boards (Approx 200) 1" x 4" x 7' long. Contact Daniel Miller with any questions 440-321-5965 2083C Locust Boards 1" x Random Width x 7" Lift measures 44" w 7' L 24" H. Contact Daniel Miller with any questions 440-321-5965 2083D Larch Boards (Approx 98) 1 3/4"-2 1/4" thick, 6" wide x 8' long. Contact Daniel Miller with any questions 440-321-5965 2085 New Chain Rack 10 spool chain, 1 spool cable, 2 spool rope on rack. Contact Daniel Miller with any question 440-321-5965 2086 Wire Rack 11 spools assorted wire on cart. 10, 12, 18 gauge. Contact Daniel Miller with any question 440-321-5965 2087 New 48" Handyman Jack Model: 485, 4660 lbs lift capacity. Contact Daniel Miller with any question 440-321-5965 2087A New 48" Hilift Jack Model: 485, 4660 lbs lift capacity. Contact Daniel Miller with any question 440-321-5965 2087B New Aluminum Shovels 6 shovels, 36" handle, mfg 2nds, 125 thick material. Contact Daniel Miller with any question 440-321-5965 2087C New Aluminum Shovels 6 shovels, 30" handle, mfg 2nds, 125 thick material. Contact Daniel Miller with any question 440-321-5965 2087D New 2 Logrite Cant Hooks 42" Peavey and 36" cant hook. Contact Daniel Miller with any question 440-321-5965 2088 Scenic View Ice cream Unit Has rebuilt JD 1 1/2 HP Hit N Miss engine with a brand new 8 quart country ice cream freezer mounted on a JD Repoduction cart. Contact Daniel Miller with any questions 440-321-5965 2089 New Chicken Coop 6' x 8' with 4 nests, metal siding and roof, 1 window, 1 man door, and 1 run out door. Contact Daniel Miller with any questions 440-321-5965 2089A New Chicken Coop 54" wide x 80" long x 50" high overall. Has a 32" wide x 50" long x 32" high house with 4 nests and metal roof. Contact Daniel Miller with any questions 440-321-5965 2090 New Corral Pen 8' x 8' sheep/calf corral with 4' gate, galvanized coating. Contact Daniel with any questions 440-321-5965 2090A New 12' Gate with Mesh 1 3/4" tubing with hangers and chain. Contact Daniel Miller with any questions 440-321-5965 2090B New Heavy Duty Galvanized Gate 10' 6 bar gate, 2" tubing. Contact Daniel Miller with any questions 440-321-5965 2090C New 10' Gate with Mesh Galvanized. Contact Daniel Miller with any questions 440-321-5965 2090D New Galvanized Gate 8' 7 bar gate, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965 2090E New Galvanized Gate 8' 7 bar gate, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965 2090F New 12' Gate with Mesh 1 3/4" tubing with hangers and chain. Contact Daniel Miller with any questions 440-321-5965 2091 New A-304-SS Auto Drinker Dual purpose Hydrant Automatic Drinking Post. Designed to replace your hydrant and have fresh water 365 days a year. Has been freeze tested down to -20 degrees Fahrenheit and did not freeze. No Electric need. Contact Daniel with any questions 440-321-5965 2091A New A-304-SS Auto Drinker Dual purpose Hydrant Automatic Drinking Post. Designed to replace your hydrant and have fresh water 365 days a year. Has been freeze tested down to -20 degrees Fahrenheit and did not freeze. No Electric need. Contact Daniel with any questions 440-321-5965 2091B New A-304-SS Auto Drinker Dual purpose Hydrant Automatic Drinking Post. Designed to replace your hydrant and have fresh water 365 days a year. Has been freeze tested down to -20 degrees Fahrenheit and did not freeze. No Electric need. Contact Daniel with any questions 440-321-5965 2091C New A-304-SS Auto Drinker Dual purpose Hydrant Automatic Drinking Post. Designed to replace your hydrant and have fresh water 365 days a year. Has been freeze tested down to -20 degrees Fahrenheit and did not freeze. No Electric need. Contact Daniel with any questions 440-321-5965 2091D New A-304-SS Auto Drinker Dual purpose Hydrant Automatic Drinking Post. Designed to replace your hydrant and have fresh water 365 days a year. Has been freeze tested down to -20 degrees Fahrenheit and did not freeze. No Electric need. Contact Daniel with any questions 440-321-5965 2092 New Booster Regulator Model: VBA11A-T02-Z, 54 pieces, input 15-145 psi, output 290 psi. Contact Daniel Miller with any questions 440-321-5965 2092A New ATV Dump Trailer* With a 36" w x 48" l x 12" d, bed 2" ball hitch. Contact Daniel Miller with any questions 440-321-5965 2092B New ATV Dump Trailer* With a 44" w x 55" l x 22" d, bed 2" ball hitch. Contact Daniel Miller with any questions 440-321-5965 2092C New ATV Dump Trailer* With hydraulic tilt and double axle with a 2" ball hitch that is broken, 50" w x 60" l x 22" d. Contact Daniel Miller with any questions 440-321-5965 2092D New Yellow Locust Post* (Approx. 88) 3 3/4" x 3 3/4" x 8'6" 2092E New Yellow Locust Post* (Approx. 88) 3 3/4" x 3 3/4" x 8'6" 2092F New Yellow Locust Post* (Approx. 88) 3 3/4" x 3 3/4" x 8'6" 2092G New Yellow Locust Post* (Approx. 88) 3 3/4" x 3 3/4" x 8'6" 2092H New Yellow Locust Post* (17) 6" x 6" x 8'6" long 2092I New Yellow Locust Post* (17) 6" x 6" x 8'6" long 2093 New 1 Yard Dumping Hopper Low profile 28" fork pocket, 64" w x 48" deep x 24" tall. USA made. Contact Daniel Miller with any questions 440-321-5965 2094 New 1 Yard Dumping Hopper 40" x 64" x 40", 29" fork pockets. USA made. Contact Daniel Miller with any questions 440-321-5965 2095 New 2 Yard Dumping Hopper 58" x 62" x 46", 30" fork pockets. USA made. Contact Daniel Miller with any questions 440-321-5965 2096 New 2 1/2 Yard Dumping Hopper 70" x 62" x 46", 30" fork pockets. USA made. Contact Daniel Miller with any questions 440-321-5965 2096A New Oak Swamp Mat 45" wide x 16' long x 7" thick. Contact Daniel Miller with any question 440-321-5965 2096B New Oak Swamp Mat 45" wide x 16' long x 7" thick. Contact Daniel Miller with any question 440-321-5965 2097 New Logging Mat (2) 10' x 7' x 7" thick. Contact Daniel Miller with any questions 440-321-5965 2098 New Logging Mat (2) 10' x 7' x 7" thick. Contact Daniel Miller with any questions 440-321-5965 2099 New Logging Mat (2) 10' x 7' x 7" thick. Contact Daniel Miller with any questions 440-321-5965 2100 1996 Arctic Cat 580 Snowmobile Meter reads: 8067 miles, 888 hours, Suzuki gas engine, fast track long travel system, condition unknown. Contact Daniel with any questions 440-321-5965 2100A 2001 Arctic Cat 600 Snowmobile Meter reads: 2347 miles, 96 hours, fast track long travel system, condition unknown. Contact Daniel with any questions 440-321-5965 2100B 2002 Polaris Indy 500 EFI Snowmobile Model: 0930674, SN: 2052347, Meter reads: 3654 miles, 0 hours, condition unknown. Contact Daniel with any questions 440-321-5965 2102 Stihl MS290 Chain Saw 18" bar, never used much, comes with aluminum case and some misc. Runs good. Contact Daniel Miller with any questions 440-321-5965 2103 Walk Behind Classen Aerator 19", powered by a Honda engine. Good working condition. 2104 Lesco Overseeder Powered by a Honda engine. In good working condition 2105 Classen Walk Behind Aerator 19", powered by a Honda engine. In good working condition. 2106 Bear Cat Crary Chipper Shredder Powered by a 7 hp G300 Honda 2107 Husqvarna 455 Rancher Chain Saw With 20" bar. Excellent condition. Contact Daniel Miller with any question 440-321-5965 2108 Echo CS 760 Chain Saw With 28" bar. Good running condition. Contact Daniel Miller with any question 440-321-5965 2109 Hilti DSH 900-X Concrete Saw 16" new blade. Contact Daniel Miller with any question 440-321-5965 2110 Honda HS724 Snow Blower 5" wide tracks, 24" wide, hand start. Ran last year. Contact Daniel Miller with any question 440-321-5965 2111 Craftsman Snow Blower 24", electric or hand start, 5 speed, left tire needs air, 5.5 hp Tecumseh. Ran last year. 2112 Roof 26" Brush Mower Model: 74300, SN: 103579, 2 blade, 7 hp B-S motor. Works good. Contact Daniel with any questions 440-321-5965 2113 Cub Cadet Hydro 1811 Riding Mower SN: 2050601U753828, with 50" mower deck, meter reads: 2481 hours, Kohler 18 gas motor, mfg date D036E. Contact Daniel with any questions 440-321-5965 2114 New 60" Mower Deck Frame Contact Daniel Miller with any questions 440-321-5965 2115 Ariens Lawn Tractor* Powered by 17.5 hp Briggs and Stratton engine, 42" deck. Runs and drives. Contact Daniel Miller with any questions 440-321-5965 2116 Craftsman Lawn Tractor* No engine, 54" mower deck with no blades, power washer no carburetor. Contact Daniel Miller with any questions 440-321-5965 2117 Huskee Lawn Tractor* LT 4200 7 speed 17.5 hp gas engine, no mower deck. Contact Daniel Miller with any questions 440-321-5965 2150 Gap Vax SV-11 Vacuum Pump SN: SV11-0076, has 50 hp electric motor. In like new condition. Contact Daniel Miller with any questions 440-321-5965 2190 Rims 4 metal rims and 5 aluminum, assorted sizes, some are new. All in a 44 x 54 metal crate. Contact Daniel Miller with any questions 440-321-5965 2191 Tires 6 used tires, assorted sizes. 11R22.5, 7.50-16LT, LT235/85 R16, 300-15, LT 235/85 R16, 11R22.5. Contact Daniel Miller with any questions 440-321-5965 2192 Tires 6 tires, 2 with aluminum rims. LT235/85 R16, P255/65R16, LT235/85 R16, ST 205/75 D14, 215/65 R16, 8-14.5. Contact Daniel Miller with any questions 440-321-5965 2193 Tires 4 total, 2 Dynamic 225/70R19.5 with rim, 1 Gladiator 225/70R19.5 only tire, 1 Double Coin 10R17.5 RT500 with rim. Contact Daniel Miller with any questions 440-321-5965 2194 Tires 4 Firestone LT245/75 R17, 2 with rims and 2 only tires. Contact Daniel Miller with any questions 440-321-5965 2195 Tires 4 BF Good Rich All-Terrain LT245/70R17, tires only. Contact Daniel Miller with any questions 440-321-5965 2196 Tires 6 total, 2 Firestone LT245/75R17 metal rim, 4 Mastercraft LT265/75R16 metal rim. Contact Daniel Miller with any questions 440-321-5965 2197 Tires 2 Good Year 445/50R 22.5, tire only. Contact Daniel Miller with any questions 440-321-5965 2198 Tires 4 Michelin LT 275/65R20 with aluminum rims. Contact Daniel Miller with any questions 440-321-5965 2199 Tires 6 used 285/75R 24.5 with aluminum rim. Contact Daniel Miller with any questions 440-321-5965 2200 Truck Tires General Grabbers size: 275/60 R20 2201 3 Truck Tires and Rims 1 tire and rim at 13.6-28, 2 tires and rims at 16.9-24 2202 Skid Loader Rims and Tires Set of 4, solid rubber 10-16.5 NHS with 8 lug rims. 2203 Skid Loader Rims and Tires Set of 4, 3 with tires, 8 lug rims, 12-16.5 NHS 2204 Used Rubber Track 1-12" W Solid Deal 07-353-3-5410 for a mini excavator. 2205 4 Tires 3 backhoe tires 19.5L-24, 1 tractor tire 16.9-24 2299 Air Tank Refurbished 1000 gallon air tank, 4' wide x 17' long x 46" high. In good condition. Contact Daniel Miller with any questions 440-321-5965 2300 Herkules Air Lift Table 39" x 50", 6000 lbs capacity, 5" lowered, raised up to 24". In working condition. Contact Daniel Miller with any questions 440-321-5965 2301 Herkules Air Lift Table 39" x 50", 6000 lbs capacity, 5" lowered, raised up to 24". In working condition. Contact Daniel Miller with any questions 440-321-5965 2302 Vibrating Conveyor Model: 412861, SN: 90-61188, Like new stainless steel, 24" w x 8' l x 36" h, 42" overall width, 1 hp 3 ph. Contact Daniel Miller with any questions 440-321-5965 2303 Vibrating Conveyor Model: 429821, SN: 01-65313, Key like new stainless steel 26" w x 12' l x 39" h, 48" overall width. Contact Daniel Miller with any questions 440-321-5965 2304 Welding Table 28" x 51" x 37" with T slot, nice heavy duty. Contact Daniel Miller with any questions 440-321-5965 2305 Lincoln Ideal Arc 250 Welder Model: AC-250, SN 586602, 1 ph, 230/460V, condition unknown. Contact Daniel Miller with any questions 440-321-5965 2306 Line Shaft 3 sections totaling 48' of 1 1/4" line shaft mount on 4"x6" channel. Contact Daniel Miller with any questions 440-321-5965 2307 Fuel Tank 38" x 60" fuel tank on stand, 76" high stand, in good condition. Contact Daniel Miller with any questions 440-321-5965 2307A Pipe Fittings (5) 6" x 8" magnets, 1 box of brass, S.S., steel air/pipe fittings. Contact Daniel Miller with any questions 440-321-5965 2308 Machinist Parts Assorted rails and liner way glides, 3 boxes assorted reamers, SPI OBI Cam clamp assy. Contact Daniel Miller with any questions 440-321-5965 2309 Machinist Parts Assorted calipers, indicators, air tools, brass fittings, cutoff blades, misc. Contact Daniel Miller with any questions 440-321-5965 2310 Machinist Parts Electric motor, hold downs, sheet cutting torch, foot controls, repeat o-meter, misc. Contact Daniel Miller with any questions 440-321-5965 2311 Machinist Parts 225" x 50" aluminum cart, air suction cup, Emerson control unit, model SP312 drilling/tapping head. Contact Daniel Miller with any questions 440-321-5965 2312 Machinist Parts Like new L type boring tool holder, AC/DC inverter, power supply electric tools, air sander, 7" sanding flap disc. Contact Daniel Miller with any questions 440-321-5965 2313 Machinist Parts Assorted handles, gears, cutlers, vice, reamers, rigid pipe threader. Contact Daniel Miller with any questions 440-321-5965 2314 Machinist Parts 26" fan blade, drill bits, flat pulleys, tapping unit, 3 jaw chuck, hydraulic motor. Contact Daniel Miller with any questions 440-321-5965 2315 Machinist Parts Plastic Sch.80 pipe fittings, door locks, hand miter saws. Contact Daniel Miller with any questions 440-321-5965 2316 Machinist Parts Assorted of aluminum handles, machinist cutters, gauges, welding torches and gauges. Contact Daniel Miller with any questions 440-321-5965 2317 Machinist Parts Toggle clamp, bearings, glides, pins, cutting fluid, misc. Contact Daniel Miller with any questions 440-321-5965 2318 Machinist Parts 15" Skinner 3 jaw chuck, high pressure hoses, key cutters, Toleda scale. Contact Daniel Miller with any questions 440-321-5965 2319 Machinist Parts Saw blades, knobs, buffers, drawer slides, misc. Contact Daniel Miller with any questions 440-321-5965 2320 Machinist Parts Pipe vice, steady rest, hydraulic generator, tee post pounders. Contact Daniel Miller with any questions 440-321-5965 2321 Lincoln Welder 300 amp, 220V, 3 ph, on wheels, condition unknown. Contact Daniel Miller with any questions 440-321-5965 2322 Doringer 350 Chop Saw 1.6 hp, 3 ph, 220V, motor has some damage, 13" blade, 3 extra blades, condition unknown. Contact Daniel Miller with any questions 440-321-5965 2323 Buffalo 18 Drill Press 33" x 35" stand, 3 ph electric drive, condition unknown. Contact Daniel Miller with any questions 440-321-5965 2324 Abrsaive #3 Surface Grinder 7" grinder, 56" long bed, electric motor with flat belt drive, old cast iron base, condition unknown. Contact Daniel Miller with any questions 440-321-5965 2325 Southworth Lift Table 4' x 4' x 38" high with rotating top, electric drive, 460V, 3 ph, condition unknown. Contact Daniel Miller with any questions 440-321-5965 2326 Fot Burt-Hammond Raidal Arm Drill Press Model: 643, SN: 1804, variable speed, 35" x 72" x 86" tall, nice older unit, condition unknown. Contact Daniel Miller with any questions 440-321-5965 2327 Iron Worker Buffalo 1/2 Universal Mechanical belt drive, shears 1/2" plate, 6" x 5/8" flats, punch 1" x 5/8 or 7/8 x 3/4 up to 4" x 4 1/2" angle. Good solid unit, condition unknown. Contact Daniel with any questions 440-321-5965 2328 Lincoln SAE-300 DC Welder Code: 6963, SN: A-753498 diesel powered 4 cylinder, condition unknown. Contact Daniel Miller with any questions 440-321-5965 2329 Torit Donaldson AT-3000 Filter System 2 unit, SN: IC748263, 3 hp, 3 ph, 208/460V. Contact Daniel Miller with any questions 440-321-5965 2330 Torit Donaldson AT-3000 Filter System 2 unit. Contact Daniel Miller with any questions 440-321-5965 2331 Safety Kleen Parts Washer 54" L x 41 1/2" W x 77" H, 1 roll 5/8" cable, condition unknown. Contact Daniel Miller with any questions 440-321-5965 2332 Storage Rack 12 tank capacity propane storage rack, 46" L x 41" W x 72" H. Contact Daniel Miller with any questions 440-321-5965 2333 Super Cage Crane Safety Cage Model: S-36, SN: C22032, Weights: 390 lbs. 3 person capacity, 36" L x 36" W x 94" H. Contact Daniel Miller with any questions 440-321-5965 2334 2010 Knight Global Lift Table 4000 lbs capacity, air operated lifts, 40" tall, 52" x 64" swiveling top, 13" tall when lowered. Contact Daniel Miller with any questions 440-321-5965 2335 Gray PL-1000 Lift Table 42" x 60" platform, air operated, condition unknown. Contact Daniel Miller with any questions 440-321-5965 2336 Garden Tractor Lift Table 42" x 60" platform, air operated, 1000 lbs capacity. Contact Daniel Miller with any questions 440-321-5965 2337 Cherry Picker with 8 Ton Hydraulic Jack Contact Daniel Miller with any questions 440-321-5965 2338 Welding Carts 1 steel wheel and 2 rubber wheel tank carts. Contact Daniel Miller with any questions 440-321-5965 2339 Welding Cart 2 Solid Rubber tank carts. Contact Daniel Miller with any questions 440-321-5965 2340 Parts Bins (21) 10" x 20" x 8" parts bins. Contact Daniel Miller with any questions 440-321-5965 2341 Parts Bins (Approx 40) 10" x 20" x 8" parts bins. Contact Daniel Miller with any questions 440-321-5965 2342 Parts Bins (28) 10" x 20" x 8" parts bins. Contact Daniel Miller with any questions 440-321-5965 2343 Parts Bins (20) 20" x 12" x 10" parts bins. Contact Daniel Miller with any questions 440-321-5965 2344 Parts Bins (20) 20" x 12" x 10" parts bins. Contact Daniel Miller with any questions 440-321-5965 2345 Parts Bins (00) 20" x 12" x 10" parts bins. Contact Daniel Miller with any questions 440-321-5965 2346 Air and Water Hose With Husky air operated water pump, condition unknown. Contact Daniel Miller with any questions 440-321-5965 2347 Wegoma Blower and Cyclone 8" inlet, 5 1/2" x 8" outlet, 16" diameter, line shaft setup, cyclone 6" outlet, 65" long. Contact Daniel Miller with any questions 440-321-5965 2348 Hidden View Water Pumps 2 pumps, in good condition. Contact Daniel Miller with any questions 440-321-5965 2349 Band Saw Blades Approx 30 pieces 20'7" x 1 1/2" super sharp and monk for brand. About 15 pieces have been resharpened. Were used on band saw. Contact Daniel Miller with any questions 440-321-5965 2350 40 Ton Scotchman Iron Worker Model: 4014T, 3 hp, 1 ph, 220 Volt. Contact Daniel Miller with any questions 440-321-5965 2351 Wilton Metal Cutting Band Saw 3/4 hp single phase. Contact Daniel Miller with any questions 440-321-5965 2352 12 Ton Bantam Brake 60" Cut With different dies Max air pressure, 110 psi. Contact Daniel Miller with any questions 440-321-5965 2353 Compact Bender Model: S31980, used, with 8 round dies. In good condition. Contact Daniel Miller with any questions 440-321-5965 2354 52" Tenn Smith Sheet Metal Shear Manual or air operated, 16 gallon. Contact Daniel Miller with any questions 440-321-5965 2355 8' Chicago Hand Brake Contact Daniel Miller with any questions 440-321-5965 2356 Tennsmith Hand Finger Brake 4', 16 Ga. Contact Daniel Miller with any questions 440-321-5965 2357 30" Niagra Bar Folder Mounted on a 4' x 10' x 32" table. Contact Daniel Miller with any questions 440-321-5965 2358 Pex Stow Notcher 16 Ga. air powered. Contact Daniel Miller with any questions 440-321-5965 2359 Hand Tools 3 Niagara, Pexto beader, cutter. Contact Daniel Miller with any questions 440-321-5965 2359A Crimper 3 Niagara crimper, cutter, beader with extra dies. Contact Daniel Miller with any questions 440-321-5965 2359B Crimper Model: 10019 Niagara pipe crimper. Contact Daniel Miller with any questions 440-321-5965 2359C Edger Lock former easy edger. Contact Daniel Miller with any questions 440-321-5965 2359D Crimper Niagara cutter, crimper, beader. All in 1 tool. Contact Daniel Miller with any questions 440-321-5965 2359E Shear Marshall Town 18 throatless shear. Contact Daniel Miller with any questions 440-321-5965 2359F Shear Hand shear and older crimper, beader, cutter parts and dies. Contact Daniel Miller with any questions 440-321-5965 2360 Generator Meter reads: 43 hours. Like new Whole House generator, Kohler 20hp gas electric start motor with 10000 BDG 120/240V-40 amp, all on 4 wheel cart. Contact Daniel Miller with any questions 440-321-5965 2360A Generator UST 3200/4200 W, 120V, 1 ph gas 196 cc, on wheel cart with cover. Looks like new. Contact Daniel Miller with any questions 440-321-5965 2360B New Chicago Generator 10KW belt driven generator, Model: 45416. Contact Daniel Miller with any questions 440-321-5965 2361 Ace Spot Welder Single phase, 13 Ga. Contact Daniel Miller with any questions 440-321-5965 2361A Welder Set of cutting torches on cart with Airco 9516 torch and gauges. Nice unit. Contact Daniel Miller with any questions 440-321-5965 2361B Welding Supplies 5 rolls of new welding wire. Over 100 pieces of new welding tips, nozzles, shields. Drive roller kit. Contact Daniel Miller with any questions 440-321-5965 2361C Pilot Valves 3 Vickers-model: 02-119460 PA5DG4S4LW-012C-B-60, 01-148462 PA5E4S4LW-016C-H-60-S471, DG4V-35-33C-M-U-H5-60. 1 Parker-model: D3W8CNYC56-30. All new condition. Contact Daniel Miller with any questions 440-321-5965 2361D Lincoln Electric Wire-Matic 255 Welder Code # 10166, SN: U1950418296, wire feed welder with tank complete outfit. Good working unit. Contact Daniel Miller with any questions 440-321-5965 2361E Lincoln Ideal Arc 250 Welder Code # 7279-0, SN: 340329, complete 1 phase. Good working unit. Contact Daniel Miller with any questions 440-321-5965 2361F Miller 180amp Welder SN: HD668292, with 12 hp Kohler gas motor, complete with cable leads on cart. Good working unit. Contact Daniel Miller with any questions 440-321-5965 2362 Columbian 6" Heavy Duty Vise Swivel. In good condition. Contact Daniel Miller with any questions 440-321-5965 2362A Multi Purpose Swivel Vise 5". In good condition. Contact Daniel Miller with any questions 440-321-5965 2362B Vises 4 used drill press vises. In good condition. Contact Daniel Miller with any questions 440-321-5965 2362C Stencil Machine 3/4" cap. Contact Daniel Miller with any questions 440-321-5965 2363 Welding Table with Tin Smithing Vice and Dies 48" x 62" x 31" table, 11 dies, 3/4" thick top. In good condition. Contact Daniel Miller with any questions 440-321-5965 2363A Forming Tools 7 forming tools with 8 1/2" x 8 1/2" holder. Contact Daniel Miller with any questions 440-321-5965 2364 Wesco Pallet Jack 27" x 42". Contact Daniel Miller with any questions 440-321-5965 2366 Marshall Town Electric Slitter and Beader 36", 17 Ga. hand driven, beader/cuter hooked up to electric. Also comes with handle, approx. 15 extra dies. Contact Daniel Miller with any question 440-321-5965 2367 20 Ga. Flagler Like new, electric. Contact Daniel Miller with any questions 440-321-5965 2368 22 Ga. Lock Former Contact Daniel Miller with any questions 440-321-5965 2369 Hemdley Hole Puncher #6 manual hole punch with box of extra dies. Contact Daniel Miller with any questions 440-321-5965 2370 Slip Roller Has broken handle. Contact Daniel Miller with any questions 440-321-5965 2371 Corner Punch Manual or air, 39 The Little Blacksmith 5" cap. Contact Daniel Miller with any questions 440-321-5965 2372 New Homemade Wood Stove 12" x 18" x 24" long. Contact Daniel Miller with any questions 440-321-5965 2373 Niagra #196 8' Sheet Metal Shear Estimating 20 Ga. excellent condition. Contact Daniel Miller with any questions 440-321-5965 2374 Rockford 25 Ton #3R Punch Press Contact Daniel Miller with any questions 440-321-5965 2374A Parts Cabinet Loaded with punches and tools. Will fit lot 2374 and other machines. Contact Daniel Miller with any questions 440-321-5965 2375 Peckstow #2 Circle Cutter and Roller 30" Niagara roller 19284. Contact Daniel Miller with any questions 440-321-5965 2375A Thompson Sewing Machine Model: PW-301, mini walking foot, electric drive. Contact Daniel Miller with any questions 440-321-5965 2376 2 Metal Cutting 14" Chop Saws Porter cable model: 1400, Porter cable model 1410. Contact Daniel Miller with any questions 440-321-5965 2377 Maytag Wringer Washer Contact Daniel Miller with any questions 440-321-5965 2377A Maytag Wringer Washer Completely rebuilt, with Poly Dutch Maid skirting kit, poly tub, skirting and legs, SS leg extensions. Also with aluminum leg brace kit which isn't pictured. No more rusted frame. Excellent condition. Comes with electric motor. Serviced by Miller's Maytag. Contact Daniel with any questions 440-321-5965 2377B Maytag Wringer Washer Completely rebuilt, with aluminum tub, skirting and legs are powder coated inside and out. Excellent condition. Comes with electric motor. Serviced by Miller's Maytag. Contact Daniel with any questions 440-321-5965 2377C Maytag Wringer Washer In like new or Mint condition. Original paint. Serviced with new seals by Miller's Maytag. Contact Daniel with any questions 440-321-5965 2378 Riteway Wood Stove Model: 37. Contact Daniel Miller with any questions 440-321-5965 2379 Metal Sheets Approx. 20 sheets, 4' x 10' 23 gauge sheet metal. Contact Daniel Miller with any questions 440-321-5965 2380 Assorted Sheet Metal (5) 4' x 10' and (1) 4' x 7'6" white, (1) 4' x 10' 24 gauge bronze, (1) 4' x 8' 24 gauge brown and 2 smaller pieces. Contact Daniel Miller with any questions 440-321-5965 2381 New Sheet Metal Assorted sizes of new sheet metal and (2) 36" x 72" aluminum vents. Contact Daniel Miller with any questions 440-321-5965 2381A Skid of Patterns Of all sorts including Cubaleos, approx 250 pieces total. Contact Daniel Miller with any questions 440-321-5965 2382 Pipe Threader Electric pipe threader with adjustable die and misc. Contact Daniel Miller with any question 440-321-5965 2382A Pipe Threader Set Toledo pipe threading set, 3/8" up to 2" and electric Central Machinery threader. Contact Daniel Miller with any question 440-321-5965 2382B Pipe Wrenches 11 pipe wrenches, 6" to 24" Ridgid, Pittsburgh aluminum, and USA Contact Daniel Miller with any question 440-321-5965 2384 2001 Wood Lathe 14" x 40" Central Machinery Lathe, 1 PH, Electric drive. Contact Daniel Miller with any questions 440-321-5965 2385 Press Rite Punch Press Contact Daniel Miller with any questions 440-321-5965 2385A Garage Door with Opener 12' x 20' garage door. Contact Daniel with any questions 440-321-5965 2385B Stack of Blower Pipes Approx. 20 total, 28", 22", 10" blower pipe and adapters up to 12' long. Assorted used pipes in good condition. Contact Daniel with any questions 440-321-5965 2385C Blower Pipes 2 skids of 12", 10", 8", 6", 5" pipe, elbows, y's, tees, blast gates. Contact Daniel Miller with any questions 440-321-5965 2386 Rock-Drill and Chipping Hammer Pneumatic. Good working condition. 2386A Drill Press Guardian Power 5/8" cap, 3/4 hp 1ph, 12 speed. In good condition. Contact Daniel Miller with any questions 440-321-5965 2387 Central Machinery Drill Press 16 speed, 5/8" cap., 1hp 1ph. In good condition. Contact Daniel Miller with any questions 440-321-5965 2388 Welding Table 39" x 65" x 38" Hamilton steel table, Precision top. Was used in printing shop. Contact Daniel Miller with any questions 440-321-5965 2389 Wrench Set 12 wrench set from 1 1/16 to 3 7/8, mostly Armstrong and Williams. USA made. Contact Daniel Miller with any question 440-321-5965 2390 Pallet of Punch Set and Misc. Dies Don't know what the dies fit, 2 Whitney hand punches. Contact Daniel Miller with any question 440-321-5965 2391 2 Diamond Back Bikes Like new condition. Contact Daniel Miller with any questions 440-321-5965 2391A Quincy 7 Air Compressor SN: 293800 S, Kohler gas motor. Working condition. Contact Daniel Miller with any questions 440-321-5965 2392 Welding Table with 2" Electric Drive Belt Sander 30" x 48" x 42" on caster. Contact Daniel Miller with any questions 440-321-5965 2392A Welding Table 30" x 48" x 32" on caster. Contact Daniel Miller with any questions 440-321-5965 2413 Anvils 4 smaller anvils, 1 blue forge, 2 railroad iron anvils, 1 green homemade. Contact Daniel Miller with any questions 440-321-5965 2414 Fisher 147 Anvil Fair Condition. Contact Daniel Miller with any questions 440-321-5965 2415 Forming Tools 6 forming tinsmithing tools with tool holder, 7 1/2" x 29 1/2" plate. Contact Daniel Miller with any question 440-321-5965 2416 Forming Tools 8 forming tinsmithing tools with tool holder, 7 1/2" x 29 1/2" plate. Contact Daniel Miller with any question 440-321-5965 2417 Niagra Stove Pipe Seamer Model: 8610. Nice orginal condition. Contact Daniel Miller with any question 440-321-5965 2418 New 40 Pressurized Abrasive Sand Blaster In box. Contact Daniel Miller with any questions 440-321-5965 2419 2002 SCMI Wide Belt Sander Model: 10/S M3 135, SN: AE/023279, 53" wide, (2) 8" platens, 230V 3ph, electric motors have some damage and 1 cylinder arm broken. Unit has not been tested, came out of storage. (2) 29" x 56" roller extension tables-1 side panel is missing. Condition unknown. Contact Daniel Miller with any questions 440-321-5965 2420 RyoBi Saw Model: TSS102L, 10" cap. Sliding compound. In good condition. Contact Daniel Miller with any questions 440-321-5965 2420A New Compact Floor Bender Max stock width 1 15/16", max stock thickness 5/16", max stock diameter 5/8". Contact Daniel Miller with any questions 440-321-5965 2421 Welding Table Solid steel, 3" top, 30" x 43" x 25". Contact Daniel Miller with any question 440-321-5965 2421A Welding Table Heavy duty on casters, 1 caster broke off, 27" x 96" x 31". Contact Daniel Miller with any question 440-321-5965 2422 New Plywood (11) 3/4" tongue-groove, some edges are damaged. Contact Daniel Miller with any question 440-321-5965 2423 Trusses 10 pieces with 12" overhang on both ends, 4 pieces with 12" over hang on 1 end, 24' trusses, 8/12 pitch. Contact Daniel Miller with any questions 440-321-5965 2423A New Steps 13 steps, set of poplar steps, 13' l ong x 30" wide x approx. 9' high, 6 3/4" risers. Contact Daniel Miller with any question 440-321-5965 2423B New Steps 7 steps, set of oak/pine steps, 92" long x 43 1/2" wide x approx. 6' high, 7" risers. Contact Daniel Miller with any question 440-321-5965 2423C New Steps 3 steps, set of poplar/plywood steps, 47" long x 40" wide x 32" tall. Contact Daniel Miller with any question 440-321-5965 2424 New Hardie Shingles H25 Straight Approx. 120 pieces .25" x 15.25" x 48", 7" EXP Monterey taupe color. Contact Daniel Miller with any questions 440-321-5965 2425 Hardie Trim 5/4 Smooth H25 Approx. 60 pieces 1" x 3.5" x 12', Robo gray color. Contact Daniel Miller with any questions 440-321-5965 2426 Hardie Trim 5/4 Smooth H25 Approx. 40 pieces 1" x 5.5" x 12', Robo gray color. Contact Daniel Miller with any questions 440-321-5965 2427 Hardie Trim 5/4 Smooth H25 19 pieces 1" x 11 1/4" x 12' and 17 pieces 1" x 7 1/4" x 12'. Robo gray color. Contact Daniel Miller with any questions 440-321-5965 2428 Vinyl Siding 4 boxes of Aspen White Crane board/vinyl siding, 14" wide, approx 8 square feet per box with corners, siding has 2.4R value insulation. Contact Daniel Miller with any questions 440-321-5965 2429 Pallet Racking 60" x 16'4" pallet racking, (5) uprights, (16) cross beams. Contact Daniel Miller with any questions 440-321-5965 2430 Pallet Racking 60" x 16'4" pallet racking, (5) uprights, (16) cross beams. Contact Daniel Miller with any questions 440-321-5965 2431 Pallet Racking 60" x 16'4" pallet racking, (5) uprights, (16) cross beams. Contact Daniel Miller with any questions 440-321-5965 2431A Pallet Racking (9) 60" x 16'6" upright only, tear drop style. Contact Daniel Miller with any questions 440-321-5965 2431B Pallet Racking (12) 60" x 16'6" upright only, tear drop style. Contact Daniel Miller with any questions 440-321-5965 2432 Heavy Duty Cart 30" x 48", 2 swivel caster and 2 stationary. Contact Daniel Miller with any questions 440-321-5965 2433 Mettler Toledo Pallet Scale Model: IND236, 100-240V, 48" x 96". Weight capacity 5000LBS. Good working unit. 2434 Industrial Upcut Saw Model: C500L-3-4799, electric drive, air controls, 5 hp 3 ph. 2435 Industrial Upcut Saw Model: N510L-5-165496, electric drive, air controls, 10 hp 3 ph. 2436 Omega Chop Saw Model: T50 350 US, 14" blade diameter, single phase, 230V and air powered. Very nice unit. 2437 Dump Hopper 48" wide x 56" long x 48" high 2437A Dump Hopper 36" wide x 60" long x 36" high, on steel casters. 2437B Dump Hopper 36" wide x 60" long x 36" high, on steel casters. 2438 Gardner Denver Blower Model: 553-ADG, SN: P12098, powered by an electric motor, 25 hp 3 ph, 230/460V, 6" outlet. 2439 Hossfeld Bender Size 2, SN: B-35070, flooring mounting plate measures 17" x 22 1/2". Does not include dies. Contact Daniel Miller with any questions 440-321-5965 2440 2 Woven Wire 2 rolls of woven wire, 48" height. Looks to be full rolls. Contact Daniel Miller with any question 440-321-5965 2441 Singer Industrial Sewing Machine Model: 211 G155. Was used in buggy shop, line shaft ready, has no reverse. In good working condition. Contact Daniel Miller with any question 440-321-5965 2442 New Pulleys 4 blue 12" x 2 1/2" shaft x 2 1/8" wide, 4 green 11" x 1 3/16 shaft, variable speed. Contact Daniel Miller with any question 440-321-5965 2442A Fuel Transfer Tank with 12V GPI Pump In good condition. 2443 Cabinets 2 good used 5 drawer lateral file cabinets, 19" x 42" x 67". Contact Daniel Miller with any question 440-321-5965 2443A Rubber Parking Lot Berms Contact Daniel Miller with any questions 440-321-5965 2444 New Hydraulic Hose (16) 3/4" x 8', (22) 3/4" x 6'. Contact Daniel Miller with any question 440-321-5965 2445 Skid of New Galvanized Bolts and Lags 3/8"-1/2"-5/8" diameter up to 8" long. Contact Daniel Miller with any question 440-321-5965 2445A Skid of New Pulleys 8 total, 25" to 11". Contact Daniel Miller with any questions 440-321-5965 2445B Skid of New Pulleys 20" to 4" and misc. sprockets. Contact Daniel Miller with any questions 440-321-5965 2446 Skid of New Sprockets 4 1/2" to 22". Contact Daniel Miller with any questions 440-321-5965 2447 New Pulleys Total of 5, 8 1/2" x 28". Contact Daniel Miller with any questions 440-321-5965 2448 New Sprocket Repair Links Assorted sizes from small to 200. Contact Daniel Miller with any questions 440-321-5965 2449 Skid of Roller Chains 50-1R, Morse 120H, and connector links. Contact Daniel Miller with any question 440-321-5965 2450 Skid of Banding Tools Used banding tools and seals for plastic and metal. Contact Daniel Miller with any question 440-321-5965 2451 Strapping Tools 1 new with a part missing, 1 used metal strapping tool. Contact Daniel Miller with any question 440-321-5965 2452 Wall Mount Shop Fans 8 fans, electric drive. 2453 Craftsman Table Saw Model: 11327520. 3/4hp electric motor, mounted on a wooden cabinet. Contact Daniel Miller with any questions 440-321-5965 2454 Misc. Poly Trim and Spindles (10) spindles, (20) 3/8" thick x 8" wide x 72" long, various colors. Contact Daniel Miller with any questions 440-321-5965 2455 Metal Lathe Timken roller bearing equipped, 56" long bed, 6" swing, 32" length capacity, 3 extra chucks, steady rest, chuck and gears, drive shaft is slightly bent but usable. Contact Daniel Miller with any questions 440-321-5965 2456 Rubber Mats (10) 4' x 8' x 3/4" thick. Like new. Contact Daniel Miller with any questions 440-321-5965 2457 Hand Puncher Model: HP-20, Woodward-Fab hand punch 2458 Magnum Pressure Washer 4000 series with heater and hose reel, powered by a Honda engine. Good unit. 2459 Forks 4" x 42" x 16", 1 1/2" thick heel. Contact Daniel Miller with any questions 440-321-5965 2460 Forks 4" x 42" x 16", 1 3/4" thick heel. Contact Daniel Miller with any questions 440-321-5965 2461 Lumber Carts 2 Hamilton oak 4' x 8' x 18" with 2 rigid 3" x 16" center wheels and (4) 2" x 8" swivel caster. In good condition. Contact Daniel Miller with any questions 440-321-5965 2462 Ellis Metal Cutting Bandsaw Model: 1500, 3/4 hp 1 ph, 7" x 10" cutting capacity, blade size 9'6" x 3/4" x .035. In good condition. Contact Daniel with any questions 440-321-5965 2463 Reznor N6 Heater Condition unknown. Contact Daniel with any questions 440-321-5965 2464 Reznor N6 Heater Model: HCR6250F, 115/24V. Contact Daniel with any questions 440-321-5965 2465 Reznor N6 Heater Model: HCR6250F, 115/24V. Condition unknown. Contact Daniel with any questions 440-321-5965 2466 Tool Box Yellow tool chest with electric tools, 21" x 35" x 39". Working condition. Contact Daniel Miller with any questions 440-321-5965 2467 2011 Eaton Transformer Catalog # T20P11S50EE, Type: DS-4 single phase transformer, class AA 60 hz pri volts 240/480, sec volts 120/240 KVA50. Contact Daniel Miller with any questions 440-321-5965 2468 Peerless LHM-320 Hacksaw With a Pyrotek saw frame height control, 2 hp 3 ph. Contact Daniel Miller with any questions 440-321-5965 2469 New Pella Window 71 1/2" x 59 1/2" white wood frame, 3/4" insulating glass. Has vinyl J channel. Contact Daniel Miller with any questions 440-321-5965 2470 New Pella Window 56" x 73" almond exterior-white exterior, 6 9/16" wall depth, crank out window. Contact Daniel Miller with any questions 440-321-5965 2471 New Pella Window 56" x 73" almond exterior-white exterior, 6 9/16" wall depth, crank out window. Contact Daniel Miller with any questions 440-321-5965 2472 New Simonton Window 5500 casement picture, 88" x 67" white vinyl crank window with J channel. Contact Daniel Miller with any questions 440-321-5965 2473 New Vinyl Jeldwen Window 96 x 48 black exterior, white interior crank window. Has nailing fin. Contact Daniel Miller with any questions 440-321-5965 2474 New Vinyl Jeldwen Window 96 x 48 black exterior, white interior crank window. Has nailing fin. Contact Daniel Miller with any questions 440-321-5965 2475 New Vinyl Perfexion Window Replacement window. 25 3/4" x 29 5/16 double hung. Contact Daniel Miller with any questions 440-321-5965 2476 New Jeldwen Window 2 windows, double hung one has a damaged frame. 30" w x 48" h wood frame painted white. Contact Daniel Miller with any questions 440-321-5965 2477 New Pella Trapezoid Windows 2 vinyl windows, 36" wide x 36" long point. Contact Daniel Miller with any questions 440-321-5965 2478 New Pella Windows Brown 36" x 52" vinyl frame glass and 1 new 28 1/2 x 24 1/2 vinyl replacement, double hung window. Contact Daniel Miller with any questions 440-321-5965 2479 New Simonton Windows 35 1/2" x 35 1/2" double hung vinyl window with nailing flange. Contact Daniel Miller with any questions 440-321-5965 2480 New Double Doors Solid 36" x 79" double black stained doors with no frame. Contact Daniel Miller with any questions 440-321-5965 2481 New Solid Oak Door Slad 36" x 80" and a Simonton sliding door screen on rollers, dimensions are 35 1/4" wide x 75 1/2" high. Contact Daniel Miller with any questions 440-321-5965 2482 3 Painted White Doors 30" x 80". Contact Daniel Miller with any questions 440-321-5965 2483 3 Painted White Doors (2) 30" x 80", (1) 24" x 80". Contact Daniel Miller with any questions 440-321-5965 2484 3 White Doors (2) 22" x 80" with 5 1/4" jamp, (1) 30" x 80" with 5 1/4" jamp. Contact Daniel Miller with any questions 440-321-5965 2485 New Grey Kraftmaid Cabinets 27" x 90" x 24" tall cabinet, 27" x 35" x 24". Contact Daniel Miller with any questions 440-321-5965 2486 New Cabinets 48" x 21" x 35" tall vanity, 12" x 12" x 36" tall corner shelf, 15" x 12" x 45" cabinet extra drawers, trim molding, and shelves. Contact Daniel Miller with any questions 440-321-5965 2487 Harrington Forklift Boom 6' long overall extends to 12', max capacity at 6' is 6000 lbs. 12'=2500 lbs. Contact Daniel Miller with any questions 440-321-5965 2488 Kelly Dock Leveler Model: H630W, SN: D023144, 40,000 lbs capacity, 1 hp 3 ph, 6' wide x 8'9" with 16" drop, 24" high up to 56" high. Used. Contact Daniel with any questions 440-321-5965 2489 4 Metal Cabinets 36" wide x 84" high x 12" deep with shelving. Contact Daniel Miller with any questions 440-321-5965 2490 4 Metal Cabinets 36" wide x 84" high x 12" deep with shelving. Contact Daniel Miller with any questions 440-321-5965 2491 4 Metal Cabinets 36" wide x 84" high x 12" deep with shelving. Contact Daniel Miller with any questions 440-321-5965 2492 Bulk Tank 36 x 84 Copeland. Has a couple of dents on outside, approx 150 gallon, 9'4" overall length x 48" high. Contact Daniel with any questions 440-321-5965 2493 Tire Chains Set of 2 skidder tire chains. Contact Myron Nissley with any questions 574-536-2481 2495 Engine Crane* 2000 lbs lift capacity, manual operation, mounted on casters. Contact Daniel Miller with any questions 440-321-5965 2496 Ammco Lift* Model: B2900F, SN: P960221528, capacity 9000 lbs, lifting current 20 amps, 1 ph-60hz, power unit 31248-3, 230V. Contact Daniel Miller with any questions 440-321-5965 2497 Fuel Transfer Tank* 120 gallon capacity, 24" w x 60" l x 24" h. Contact Daniel Miller with any questions 440-321-5965 2498 Kohler Engine* Kohler Command 25, 25 hp gas engine, electric start, no gas tank, good unit. Contact Daniel Miller with any questions 440-321-5965 2499 Power Washer and Hose Reel* 2000 psi electric washer, no wand, hose reel was used on a fire truck, loaded with high psi hose. Contact Daniel Miller with any questions 440-321-5965 2500 3 File Cabinets* (3) 5 drawer file cabinets, 15" w x 27" d x 64" h. 2501 File Cabinet* 4 drawer file cabinet, 42" w x 19" d x 53" h 2502 3 File Cabinets* (3) 5 drawer file cabinets, 15" w x 27" d x 64" 2503 5 File Cabinets* (5) 2 drawer file cabinets 2504 3 File Cabinets* (2) 4 drawer fire proof, no keys, 17" w x 30" d x 53" h. (1) 4 drawer file cabinet, 18" w x 27" d x 53" h. 2504A 10 Drawer File Cabinet* Hardwood file cabinet. Very nice cabinet. 2505 Delta Tablesaw* SN: 93G94359, powered by a air motor, 10" blade capacity, electric motor is included. Contact Daniel Miller with any questions 440-321-5965 2506 Powermatic 12" Planer* Model: 100, no motor. Contact Daniel Miller with any questions 440-321-5965 2507 Grizzly Jointer* Hydraulic drive. Contact Daniel Miller with any questions 440-321-5965 2508 Grizzly Belt/Disc Sander* 6" x 9" belt and disc sander, model: SD-69, air powered. Contact Daniel Miller with any questions 440-321-5965 2509 Compact Floor Bender* Good condition. Contact Daniel Miller with any questions 440-321-5965 2510 DeWalt Sliding Compound Miter Saw* SN: 11189, working condition. Contact Daniel Miller with any questions 440-321-5965 2511 Stihl Chainsaw, Air Skilsaws, and Misc.* Stihl 026 needs tune up, 2 air powered Skilsaws, Senco stapler, die grinder, multi charging bus bar. Contact Daniel Miller with any questions 440-321-5965 2512 Electric Uupright Manlift Model: 68003-001, SN: 15358, max platform height 40', 12V, 300 lbs lift capacity, on board charger. Actual condition of unit is unknown. Contact Daniel Miller with any questions 440-321-5965 2513 Lot of Misc.* 2 log chains, (2) 3 ton jack stands. Contact Daniel Miller with any questions 440-321-5965 2514 Lot of Misc* 2 sets of harness and tugs, 1 bipolastic, 1 leather, and surrey pole. Contact Daniel Miller with any questions 440-321-5965 2515 Table Saw* Sears and Roebuck, model: 10323420. Contact Daniel Miller with any questions 440-321-5965 2516 Remmey Pallet Hydraulic Pak* Mfg date 6/22/2000. Tank capacity 30 gallon, mas psi 1200, with oil cooler, powered by a 15hp electric 3 phase 230/460V motor. 2517 Hydrualic Pak* Powered by a 10hp 3ph electric motor, with a continental pump, 4000 psi 2518 Hydrualic Tank and Motor* 7.5hp 3 phase, 230/460V 2519 Vynil Pickett Fence* 48' tall, some are 6' and 8' long and there are 9 sections including a gate section. Contact Daniel Miller with any questions 440-321-5965 2550 Walnut 4/4 Boards 5 /12" wide, lift measurements 45" wide x 7' long x 35" high. Contact Daniel with any questions 440-321-5965 2551 Walnut 4/4 Boards 5 1/2" wide x 6' long. Lift measurements 48" wide x 6' long x 19" high. Contact Daniel with any questions 440-321-5965 2552 Walnut 4/4 Boards 6" and 4" wide, 6' to 8' long. Lift measures 53" wide x 34" high. Contact Daniel with any questions 440-321-5965 2553 Walnut 4/4 Boards 5"-5 1/2" wide, 7'-6' long. Lift measures 48" wide x 31" high. Contact Daniel with any questions 440-321-5965 2554 Walnut 4/4 Boards 5 1/2" wide, 6' and 8' long. Lift measures 48" wide x 31" high. Contact Daniel with any questions 440-321-5965 2555 Walnut 4/4 Boards 5 3/4" wide, 6' and 7' long. Lift measures 50" wide x 37" high. Contact Daniel with any questions 440-321-5965 2556 Walnut 4/4 Boards 5 1/2" wide, 6'-7' and 8' long. Lift measures 47" wide x 35" high. Contact Daniel with any questions 440-321-5965 2557 Grade Outs Mixed Hardwoods 4/4 random width, lift measures 46" w x 38" h approx. 10' long. Contact Daniel Miller with any questions 440-321-5965 2558 Grade Outs Mixed Hardwoods 4/4 random width, lift measures 48" w x 40" h approx. 10' long. Contact Daniel Miller with any questions 440-321-5965 2559 Kiln Dried Grade Outs 4/4 random width and various lengths. Mostly red oak. Contact Daniel with any questions 440-321-5965 2560 Kiln Dried Grade Outs 4/4 random width and various lengths. Mostly red oak. Contact Daniel with any questions 440-321-5965 2561 Kiln Dried Grade Outs 4/4 random width and various lengths. Mostly red oak. Contact Daniel with any questions 440-321-5965 2562 Kiln Dried Grade Outs 4/4 random width and various lengths. Mostly red oak. Contact Daniel with any questions 440-321-5965 2563 Kiln Dried Grade Outs 4/4 random width and various lengths. Mixed species Contact Daniel with any questions 440-321-5965 2564 Kiln Dried Grade Outs 4/4 random width and various lengths. Mixed species Contact Daniel with any questions 440-321-5965

Listing Information

Bright Star is excited to provide a consignment auction to serve your area. Our goal is to provide sellers with an easy option to turn their unused equipment into cash. We provide cutting edge marketing to earn sellers top dollar for their equipment. Buyers can be expected to be treated fairly and with absolute transparency and integrity. We look forward to working with you.

Information Lot
Accepting consignments of quality equipment! Specializing in all heavy equipment, including construction, excavating, sawmill, forestry, trucks and trailers. Call your auction agent today to capitalize on free marketing for your equipment.

00A

Information Lot
For onsite crowd only! Will be sold indoors. Selling Dewalt, Milwaukee, Makita cordless tools, and new knives. Also approx. 103 lots of toys.

Preview & Inspection
Buyers are responsible to do their own inspection to determine the condition of the items they purchase. Inspections times are available as follows: Anytime during normal business hours. Monday-Friday 8 AM - 4 PM
*we will be closed Thursday 11/23/23 Thanksgiving Day.
Location of Auction: 16989 Kinsman Rd., Middlefield, OH 44062

Loadout Information
All items must be paid for before removal. FREE loadout day of auction until 4 pm and Saturday Nov 25 from 8 AM to 1 PM and for 2 weeks following the auction M-F 8 AM to 4 PM. Starting Dec 13, by appointment and for a $25 per item loadout fee. Any items not removed in 30 days become the property of the auction company. Call Daniel Wengerd 440-636-3128 or email lakeerie@brightstarauctions.com

Payment Information
Payment terms: 6.75% sales tax on equipment. Vehicle rate depends on where the buyer is located. But OH Buyers are exempt. 10% Onsite and 13% Online Buyer's Premium in effect for all purchases. Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction.

CAT 555D Wheel Skidder 1:50 Scale Replica - Die Cast Metal
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s

Heavy Equipment Key Set 36 Keys
Shipping available for $20

Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

2000

New 40' High Cube Multi-Door Container
40', high cube, multi-door, shipping container, 4 side doors, end doors, 9'6'' high, 8' wide

2001

2023 New One-Trip 20' Standard Container
SN: ZXJU0049496

2002

2023 New One-Trip 20' Standard Container
SN: RXCU1026845

2002A

2023 New One-Trip 20' Standard Container*
TGSU 226867 3

2002B

2023 New One-Trip 20' Standard Container*
TGSU 226781 0

2003

New 1 Cubic Yard Stackable Self Dumping Hopper with Fork Pockets
Contact Bronson with any questions 574-210-3721

2004

New 2 Cubic Yard Self Dumping Hopper with Fork Pockets
Contact Bronson with any questions 574-210-3721

2005

New 2 Cubic Yard Self Dumping Hopper with Fork Pockets
Contact Bronson with any questions 574-210-3721

2006

New 2 Cubic Yard Self Dumping Hopper with Fork Pockets
Contact Bronson with any questions 574-210-3721

2007

New 3/8" AR500 Gong Shooting Target
Contact Bronson with any questions 574-210-3721

2008

New 3/8" AR500 Gong Shooting Target
Contact Bronson with any questions 574-210-3721

2009

New 2 Cubic Skid Steer Hopper with Fork Pockets
Contact Bronson with any questions 574-210-3721

2010

New Welding Table with Shelf
30" x 57". Contact Bronson with any questions 574-210-3721

2011

New Welding Table with Shelf
30" x 57". Contact Bronson with any questions 574-210-3721

2012

New Welding Table with Shelf
30" x 57". Contact Bronson with any questions 574-210-3721

2013

New Welding Table with Shelf
30" x 57". Contact Bronson with any questions 574-210-3721

2014

New Welding Table with Shelf
30" x 57". Contact Bronson with any questions 574-210-3721

2015

New Welding Table with Shelf
30" x 57". Contact Bronson with any questions 574-210-3721

2016

New KC Work Bench
28" x 60". Contact Bronson with any questions 574-210-3721

2017

New KC Work Bench
28" x 60". Contact Bronson with any questions 574-210-3721

2018

New KC Work Bench
28" x 60". Contact Bronson with any questions 574-210-3721

2019

New 4 Cubic Yard Debris Box
Contact Bronson with any questions 574-210-3721

2020

New 4 Cubic Yard Debris Box
Contact Bronson with any questions 574-210-3721

2021

50 New Safety Cones
Contact Daniel Miller with any questions 440-321-5965

2080A

Southern Yellow Pine Fence Posts
6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2080B

Southern Yellow Pine Fence Posts
6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2080C

Southern Yellow Pine Fence Posts
6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2080D

Southern Yellow Pine Fence Posts
6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2080E

Southern Yellow Pine Fence Posts
6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2080F

Southern Yellow Pine Fence Posts
6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2080G

Southern Yellow Pine Fence Posts
6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2080H

Southern Yellow Pine Fence Posts
6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2080I

Southern Yellow Pine Fence Posts
6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2080J

Southern Yellow Pine Fence Posts
6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2081

Southern Yellow Pine Fence Posts
3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2081A

Southern Yellow Pine Fence Posts
3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2081B

Southern Yellow Pine Fence Posts
3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2081C

Southern Yellow Pine Fence Posts
3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2081D

Southern Yellow Pine Fence Posts
3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2081E

Southern Yellow Pine Fence Posts
3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2081F

Southern Yellow Pine Fence Posts
3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2081G

Southern Yellow Pine Fence Posts
3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2081H

Southern Yellow Pine Fence Posts
3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2081I

Southern Yellow Pine Fence Posts
3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2082A

New Gates
16' x 50" 6 bar, 1 3/4" tubing with hangers. Contact Daniel Miller with any questions 440-321-5965

2082B

New Gates
16' x 50" 6 bar, 1 3/4" tubing with hangers. Contact Daniel Miller with any questions 440-321-5965

2082C

New Gates
14' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965

2082D

New Gates
14' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965

2082E

New Gates
12' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965

2082F

New Gates
12' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965

2082G

New Gates
10' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965

2082H

New Gates
10' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965

2082I

New Gates
8' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965

2082J

New Gates
8' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965

2082K

New Gates
6' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965

2082L

New Gates
6' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965

2082M

New Gates
4' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965

2082N

New Gates
4' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965

2083

Larch Fence Posts
(35) 5 1/2" x 5 1/2" x 8'. Contact Daniel Miller with any questions 440-321-5965

2083A

Larch Fence Posts
(35) 5 1/2" x 5 1/2" x 8'. Contact Daniel Miller with any questions 440-321-5965

2083B

Locust Boards
(Approx 200) 1" x 4" x 7' long. Contact Daniel Miller with any questions 440-321-5965

2083C

Locust Boards
1" x Random Width x 7" Lift measures 44" w 7' L 24" H. Contact Daniel Miller with any questions 440-321-5965

2083D

Larch Boards
(Approx 98) 1 3/4"-2 1/4" thick, 6" wide x 8' long. Contact Daniel Miller with any questions 440-321-5965

2085

New Chain Rack
10 spool chain, 1 spool cable, 2 spool rope on rack. Contact Daniel Miller with any question 440-321-5965

2086

Wire Rack
11 spools assorted wire on cart. 10, 12, 18 gauge. Contact Daniel Miller with any question 440-321-5965

2087

New 48" Handyman Jack
Model: 485, 4660 lbs lift capacity. Contact Daniel Miller with any question 440-321-5965

2087A

New 48" Hilift Jack
Model: 485, 4660 lbs lift capacity. Contact Daniel Miller with any question 440-321-5965

2087B

New Aluminum Shovels
6 shovels, 36" handle, mfg 2nds, 125 thick material. Contact Daniel Miller with any question 440-321-5965

2087C

New Aluminum Shovels
6 shovels, 30" handle, mfg 2nds, 125 thick material. Contact Daniel Miller with any question 440-321-5965

2087D

New 2 Logrite Cant Hooks
42" Peavey and 36" cant hook. Contact Daniel Miller with any question 440-321-5965

2088

Scenic View Ice cream Unit
Has rebuilt JD 1 1/2 HP Hit N Miss engine with a brand new 8 quart country ice cream freezer mounted on a JD Repoduction cart. Contact Daniel Miller with any questions 440-321-5965

2089

New Chicken Coop
6' x 8' with 4 nests, metal siding and roof, 1 window, 1 man door, and 1 run out door. Contact Daniel Miller with any questions 440-321-5965

2089A

New Chicken Coop
54" wide x 80" long x 50" high overall. Has a 32" wide x 50" long x 32" high house with 4 nests and metal roof. Contact Daniel Miller with any questions 440-321-5965

2090

New Corral Pen
8' x 8' sheep/calf corral with 4' gate, galvanized coating. Contact Daniel with any questions 440-321-5965

2090A

New 12' Gate with Mesh
1 3/4" tubing with hangers and chain. Contact Daniel Miller with any questions 440-321-5965

2090B

New Heavy Duty Galvanized Gate
10' 6 bar gate, 2" tubing. Contact Daniel Miller with any questions 440-321-5965

2090C

New 10' Gate with Mesh
Galvanized. Contact Daniel Miller with any questions 440-321-5965

2090D

New Galvanized Gate
8' 7 bar gate, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965

2090E

New Galvanized Gate
8' 7 bar gate, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965

2090F

New 12' Gate with Mesh
1 3/4" tubing with hangers and chain. Contact Daniel Miller with any questions 440-321-5965

2091

New A-304-SS Auto Drinker
Dual purpose Hydrant Automatic Drinking Post. Designed to replace your hydrant and have fresh water 365 days a year. Has been freeze tested down to -20 degrees Fahrenheit and did not freeze. No Electric need. Contact Daniel with any questions 440-321-5965

2091A

2091B

2091C

2091D

2092

New Booster Regulator
Model: VBA11A-T02-Z, 54 pieces, input 15-145 psi, output 290 psi. Contact Daniel Miller with any questions 440-321-5965

2092A

New ATV Dump Trailer*
With a 36" w x 48" l x 12" d, bed 2" ball hitch. Contact Daniel Miller with any questions 440-321-5965

2092B

New ATV Dump Trailer*
With a 44" w x 55" l x 22" d, bed 2" ball hitch. Contact Daniel Miller with any questions 440-321-5965

2092C

New ATV Dump Trailer*
With hydraulic tilt and double axle with a 2" ball hitch that is broken, 50" w x 60" l x 22" d. Contact Daniel Miller with any questions 440-321-5965

2092D

New Yellow Locust Post*
(Approx. 88) 3 3/4" x 3 3/4" x 8'6"

2092E

New Yellow Locust Post*
(Approx. 88) 3 3/4" x 3 3/4" x 8'6"

2092F

New Yellow Locust Post*
(Approx. 88) 3 3/4" x 3 3/4" x 8'6"

2092G

New Yellow Locust Post*
(Approx. 88) 3 3/4" x 3 3/4" x 8'6"

2092H

New Yellow Locust Post*
(17) 6" x 6" x 8'6" long

2092I

New Yellow Locust Post*
(17) 6" x 6" x 8'6" long

2093

New 1 Yard Dumping Hopper
Low profile 28" fork pocket, 64" w x 48" deep x 24" tall. USA made. Contact Daniel Miller with any questions 440-321-5965

2094

New 1 Yard Dumping Hopper
40" x 64" x 40", 29" fork pockets. USA made. Contact Daniel Miller with any questions 440-321-5965

2095

New 2 Yard Dumping Hopper
58" x 62" x 46", 30" fork pockets. USA made. Contact Daniel Miller with any questions 440-321-5965

2096

New 2 1/2 Yard Dumping Hopper
70" x 62" x 46", 30" fork pockets. USA made. Contact Daniel Miller with any questions 440-321-5965

2096A

New Oak Swamp Mat
45" wide x 16' long x 7" thick. Contact Daniel Miller with any question 440-321-5965

2096B

New Oak Swamp Mat
45" wide x 16' long x 7" thick. Contact Daniel Miller with any question 440-321-5965

2097

New Logging Mat
(2) 10' x 7' x 7" thick. Contact Daniel Miller with any questions 440-321-5965

2098

New Logging Mat
(2) 10' x 7' x 7" thick. Contact Daniel Miller with any questions 440-321-5965

2099

New Logging Mat
(2) 10' x 7' x 7" thick. Contact Daniel Miller with any questions 440-321-5965

2100

1996 Arctic Cat 580 Snowmobile
Meter reads: 8067 miles, 888 hours, Suzuki gas engine, fast track long travel system, condition unknown. Contact Daniel with any questions 440-321-5965

2100A

2001 Arctic Cat 600 Snowmobile
Meter reads: 2347 miles, 96 hours, fast track long travel system, condition unknown. Contact Daniel with any questions 440-321-5965

2100B

2002 Polaris Indy 500 EFI Snowmobile
Model: 0930674, SN: 2052347, Meter reads: 3654 miles, 0 hours, condition unknown. Contact Daniel with any questions 440-321-5965

2102

Stihl MS290 Chain Saw
18" bar, never used much, comes with aluminum case and some misc. Runs good. Contact Daniel Miller with any questions 440-321-5965

2103

Walk Behind Classen Aerator
19", powered by a Honda engine. Good working condition.

2104

Lesco Overseeder
Powered by a Honda engine. In good working condition

2105

Classen Walk Behind Aerator
19", powered by a Honda engine. In good working condition.

2106

Bear Cat Crary Chipper Shredder
Powered by a 7 hp G300 Honda

2107

Husqvarna 455 Rancher Chain Saw
With 20" bar. Excellent condition. Contact Daniel Miller with any question 440-321-5965

2108

Echo CS 760 Chain Saw
With 28" bar. Good running condition. Contact Daniel Miller with any question 440-321-5965

2109

Hilti DSH 900-X Concrete Saw
16" new blade. Contact Daniel Miller with any question 440-321-5965

2110

Honda HS724 Snow Blower
5" wide tracks, 24" wide, hand start. Ran last year. Contact Daniel Miller with any question 440-321-5965

2111

Craftsman Snow Blower
24", electric or hand start, 5 speed, left tire needs air, 5.5 hp Tecumseh. Ran last year.

2112

Roof 26" Brush Mower
Model: 74300, SN: 103579, 2 blade, 7 hp B-S motor. Works good. Contact Daniel with any questions 440-321-5965

2113

Cub Cadet Hydro 1811 Riding Mower
SN: 2050601U753828, with 50" mower deck, meter reads: 2481 hours, Kohler 18 gas motor, mfg date D036E. Contact Daniel with any questions 440-321-5965

2114

New 60" Mower Deck Frame
Contact Daniel Miller with any questions 440-321-5965

2115

Ariens Lawn Tractor*
Powered by 17.5 hp Briggs and Stratton engine, 42" deck. Runs and drives. Contact Daniel Miller with any questions 440-321-5965

2116

Craftsman Lawn Tractor*
No engine, 54" mower deck with no blades, power washer no carburetor. Contact Daniel Miller with any questions 440-321-5965

2117

Huskee Lawn Tractor*
LT 4200 7 speed 17.5 hp gas engine, no mower deck. Contact Daniel Miller with any questions 440-321-5965

2150

Gap Vax SV-11 Vacuum Pump
SN: SV11-0076, has 50 hp electric motor. In like new condition. Contact Daniel Miller with any questions 440-321-5965

2190

Rims
4 metal rims and 5 aluminum, assorted sizes, some are new. All in a 44 x 54 metal crate. Contact Daniel Miller with any questions 440-321-5965

2191

Tires
6 used tires, assorted sizes. 11R22.5, 7.50-16LT, LT235/85 R16, 300-15, LT 235/85 R16, 11R22.5. Contact Daniel Miller with any questions 440-321-5965

2192

Tires
6 tires, 2 with aluminum rims. LT235/85 R16, P255/65R16, LT235/85 R16, ST 205/75 D14, 215/65 R16, 8-14.5. Contact Daniel Miller with any questions 440-321-5965

2193

Tires
4 total, 2 Dynamic 225/70R19.5 with rim, 1 Gladiator 225/70R19.5 only tire, 1 Double Coin 10R17.5 RT500 with rim. Contact Daniel Miller with any questions 440-321-5965

2194

Tires
4 Firestone LT245/75 R17, 2 with rims and 2 only tires. Contact Daniel Miller with any questions 440-321-5965

2195

Tires
4 BF Good Rich All-Terrain LT245/70R17, tires only. Contact Daniel Miller with any questions 440-321-5965

2196

Tires
6 total, 2 Firestone LT245/75R17 metal rim, 4 Mastercraft LT265/75R16 metal rim. Contact Daniel Miller with any questions 440-321-5965

2197

Tires
2 Good Year 445/50R 22.5, tire only. Contact Daniel Miller with any questions 440-321-5965

2198

Tires
4 Michelin LT 275/65R20 with aluminum rims. Contact Daniel Miller with any questions 440-321-5965

2199

Tires
6 used 285/75R 24.5 with aluminum rim. Contact Daniel Miller with any questions 440-321-5965

2200

Truck Tires
General Grabbers size: 275/60 R20

2201

3 Truck Tires and Rims
1 tire and rim at 13.6-28, 2 tires and rims at 16.9-24

2202

Skid Loader Rims and Tires
Set of 4, solid rubber 10-16.5 NHS with 8 lug rims.

2203

Skid Loader Rims and Tires
Set of 4, 3 with tires, 8 lug rims, 12-16.5 NHS

2204

Used Rubber Track
1-12" W Solid Deal 07-353-3-5410 for a mini excavator.

2205

4 Tires
3 backhoe tires 19.5L-24, 1 tractor tire 16.9-24

2299

Air Tank
Refurbished 1000 gallon air tank, 4' wide x 17' long x 46" high. In good condition. Contact Daniel Miller with any questions 440-321-5965

2300

Herkules Air Lift Table
39" x 50", 6000 lbs capacity, 5" lowered, raised up to 24". In working condition. Contact Daniel Miller with any questions 440-321-5965

2301

Herkules Air Lift Table
39" x 50", 6000 lbs capacity, 5" lowered, raised up to 24". In working condition. Contact Daniel Miller with any questions 440-321-5965

2302

Vibrating Conveyor
Model: 412861, SN: 90-61188, Like new stainless steel, 24" w x 8' l x 36" h, 42" overall width, 1 hp 3 ph. Contact Daniel Miller with any questions 440-321-5965

2303

Vibrating Conveyor
Model: 429821, SN: 01-65313, Key like new stainless steel 26" w x 12' l x 39" h, 48" overall width. Contact Daniel Miller with any questions 440-321-5965

2304

Welding Table
28" x 51" x 37" with T slot, nice heavy duty. Contact Daniel Miller with any questions 440-321-5965

2305

Lincoln Ideal Arc 250 Welder
Model: AC-250, SN 586602, 1 ph, 230/460V, condition unknown. Contact Daniel Miller with any questions 440-321-5965

2306

Line Shaft
3 sections totaling 48' of 1 1/4" line shaft mount on 4"x6" channel. Contact Daniel Miller with any questions 440-321-5965

2307

Fuel Tank
38" x 60" fuel tank on stand, 76" high stand, in good condition. Contact Daniel Miller with any questions 440-321-5965

2307A

Pipe Fittings
(5) 6" x 8" magnets, 1 box of brass, S.S., steel air/pipe fittings. Contact Daniel Miller with any questions 440-321-5965

2308

Machinist Parts
Assorted rails and liner way glides, 3 boxes assorted reamers, SPI OBI Cam clamp assy. Contact Daniel Miller with any questions 440-321-5965

2309

Machinist Parts
Assorted calipers, indicators, air tools, brass fittings, cutoff blades, misc. Contact Daniel Miller with any questions 440-321-5965

2310

Machinist Parts
Electric motor, hold downs, sheet cutting torch, foot controls, repeat o-meter, misc. Contact Daniel Miller with any questions 440-321-5965

2311

Machinist Parts
225" x 50" aluminum cart, air suction cup, Emerson control unit, model SP312 drilling/tapping head. Contact Daniel Miller with any questions 440-321-5965

2312

Machinist Parts
Like new L type boring tool holder, AC/DC inverter, power supply electric tools, air sander, 7" sanding flap disc. Contact Daniel Miller with any questions 440-321-5965

2313

Machinist Parts
Assorted handles, gears, cutlers, vice, reamers, rigid pipe threader. Contact Daniel Miller with any questions 440-321-5965

2314

Machinist Parts
26" fan blade, drill bits, flat pulleys, tapping unit, 3 jaw chuck, hydraulic motor. Contact Daniel Miller with any questions 440-321-5965

2315

Machinist Parts
Plastic Sch.80 pipe fittings, door locks, hand miter saws. Contact Daniel Miller with any questions 440-321-5965

2316

Machinist Parts
Assorted of aluminum handles, machinist cutters, gauges, welding torches and gauges. Contact Daniel Miller with any questions 440-321-5965

2317

Machinist Parts
Toggle clamp, bearings, glides, pins, cutting fluid, misc. Contact Daniel Miller with any questions 440-321-5965

2318

Machinist Parts
15" Skinner 3 jaw chuck, high pressure hoses, key cutters, Toleda scale. Contact Daniel Miller with any questions 440-321-5965

2319

Machinist Parts
Saw blades, knobs, buffers, drawer slides, misc. Contact Daniel Miller with any questions 440-321-5965

2320

Machinist Parts
Pipe vice, steady rest, hydraulic generator, tee post pounders. Contact Daniel Miller with any questions 440-321-5965

2321

Lincoln Welder
300 amp, 220V, 3 ph, on wheels, condition unknown. Contact Daniel Miller with any questions 440-321-5965

2322

Doringer 350 Chop Saw
1.6 hp, 3 ph, 220V, motor has some damage, 13" blade, 3 extra blades, condition unknown. Contact Daniel Miller with any questions 440-321-5965

2323

Buffalo 18 Drill Press
33" x 35" stand, 3 ph electric drive, condition unknown. Contact Daniel Miller with any questions 440-321-5965

2324

Abrsaive #3 Surface Grinder
7" grinder, 56" long bed, electric motor with flat belt drive, old cast iron base, condition unknown. Contact Daniel Miller with any questions 440-321-5965

2325

Southworth Lift Table
4' x 4' x 38" high with rotating top, electric drive, 460V, 3 ph, condition unknown. Contact Daniel Miller with any questions 440-321-5965

2326

Fot Burt-Hammond Raidal Arm Drill Press
Model: 643, SN: 1804, variable speed, 35" x 72" x 86" tall, nice older unit, condition unknown. Contact Daniel Miller with any questions 440-321-5965

2327

Iron Worker
Buffalo 1/2 Universal Mechanical belt drive, shears 1/2" plate, 6" x 5/8" flats, punch 1" x 5/8 or 7/8 x 3/4 up to 4" x 4 1/2" angle. Good solid unit, condition unknown. Contact Daniel with any questions 440-321-5965

2328

Lincoln SAE-300 DC Welder
Code: 6963, SN: A-753498 diesel powered 4 cylinder, condition unknown. Contact Daniel Miller with any questions 440-321-5965

2329

Torit Donaldson AT-3000 Filter System
2 unit, SN: IC748263, 3 hp, 3 ph, 208/460V. Contact Daniel Miller with any questions 440-321-5965

2330

Torit Donaldson AT-3000 Filter System
2 unit. Contact Daniel Miller with any questions 440-321-5965

2331

Safety Kleen Parts Washer
54" L x 41 1/2" W x 77" H, 1 roll 5/8" cable, condition unknown. Contact Daniel Miller with any questions 440-321-5965

2332

Storage Rack
12 tank capacity propane storage rack, 46" L x 41" W x 72" H. Contact Daniel Miller with any questions 440-321-5965

2333

Super Cage Crane Safety Cage
Model: S-36, SN: C22032, Weights: 390 lbs. 3 person capacity, 36" L x 36" W x 94" H. Contact Daniel Miller with any questions 440-321-5965

2334

2010 Knight Global Lift Table
4000 lbs capacity, air operated lifts, 40" tall, 52" x 64" swiveling top, 13" tall when lowered. Contact Daniel Miller with any questions 440-321-5965

2335

Gray PL-1000 Lift Table
42" x 60" platform, air operated, condition unknown. Contact Daniel Miller with any questions 440-321-5965

2336

Garden Tractor Lift Table
42" x 60" platform, air operated, 1000 lbs capacity. Contact Daniel Miller with any questions 440-321-5965

2337

Cherry Picker with 8 Ton Hydraulic Jack
Contact Daniel Miller with any questions 440-321-5965

2338

Welding Carts
1 steel wheel and 2 rubber wheel tank carts. Contact Daniel Miller with any questions 440-321-5965

2339

Welding Cart
2 Solid Rubber tank carts. Contact Daniel Miller with any questions 440-321-5965

2340

Parts Bins
(21) 10" x 20" x 8" parts bins. Contact Daniel Miller with any questions 440-321-5965

2341

Parts Bins
(Approx 40) 10" x 20" x 8" parts bins. Contact Daniel Miller with any questions 440-321-5965

2342

Parts Bins
(28) 10" x 20" x 8" parts bins. Contact Daniel Miller with any questions 440-321-5965

2343

Parts Bins
(20) 20" x 12" x 10" parts bins. Contact Daniel Miller with any questions 440-321-5965

2344

Parts Bins
(20) 20" x 12" x 10" parts bins. Contact Daniel Miller with any questions 440-321-5965

2345

Parts Bins
(00) 20" x 12" x 10" parts bins. Contact Daniel Miller with any questions 440-321-5965

2346

Air and Water Hose
With Husky air operated water pump, condition unknown. Contact Daniel Miller with any questions 440-321-5965

2347

Wegoma Blower and Cyclone
8" inlet, 5 1/2" x 8" outlet, 16" diameter, line shaft setup, cyclone 6" outlet, 65" long. Contact Daniel Miller with any questions 440-321-5965

2348

Hidden View Water Pumps
2 pumps, in good condition. Contact Daniel Miller with any questions 440-321-5965

2349

Band Saw Blades
Approx 30 pieces 20'7" x 1 1/2" super sharp and monk for brand. About 15 pieces have been resharpened. Were used on band saw. Contact Daniel Miller with any questions 440-321-5965

2350

40 Ton Scotchman Iron Worker
Model: 4014T, 3 hp, 1 ph, 220 Volt. Contact Daniel Miller with any questions 440-321-5965

2351

Wilton Metal Cutting Band Saw
3/4 hp single phase. Contact Daniel Miller with any questions 440-321-5965

2352

12 Ton Bantam Brake 60" Cut
With different dies Max air pressure, 110 psi. Contact Daniel Miller with any questions 440-321-5965

2353

Compact Bender
Model: S31980, used, with 8 round dies. In good condition. Contact Daniel Miller with any questions 440-321-5965

2354

52" Tenn Smith Sheet Metal Shear
Manual or air operated, 16 gallon. Contact Daniel Miller with any questions 440-321-5965

2355

8' Chicago Hand Brake
Contact Daniel Miller with any questions 440-321-5965

2356

Tennsmith Hand Finger Brake
4', 16 Ga. Contact Daniel Miller with any questions 440-321-5965

2357

30" Niagra Bar Folder
Mounted on a 4' x 10' x 32" table. Contact Daniel Miller with any questions 440-321-5965

2358

Pex Stow Notcher
16 Ga. air powered. Contact Daniel Miller with any questions 440-321-5965

2359

Hand Tools
3 Niagara, Pexto beader, cutter. Contact Daniel Miller with any questions 440-321-5965

2359A

Crimper
3 Niagara crimper, cutter, beader with extra dies. Contact Daniel Miller with any questions 440-321-5965

2359B

Crimper
Model: 10019 Niagara pipe crimper. Contact Daniel Miller with any questions 440-321-5965

2359C

Edger
Lock former easy edger. Contact Daniel Miller with any questions 440-321-5965

2359D

Crimper
Niagara cutter, crimper, beader. All in 1 tool. Contact Daniel Miller with any questions 440-321-5965

2359E

Shear
Marshall Town 18 throatless shear. Contact Daniel Miller with any questions 440-321-5965

2359F

Shear
Hand shear and older crimper, beader, cutter parts and dies. Contact Daniel Miller with any questions 440-321-5965

2360

Generator
Meter reads: 43 hours. Like new Whole House generator, Kohler 20hp gas electric start motor with 10000 BDG 120/240V-40 amp, all on 4 wheel cart. Contact Daniel Miller with any questions 440-321-5965

2360A

Generator
UST 3200/4200 W, 120V, 1 ph gas 196 cc, on wheel cart with cover. Looks like new. Contact Daniel Miller with any questions 440-321-5965

2360B

New Chicago Generator
10KW belt driven generator, Model: 45416. Contact Daniel Miller with any questions 440-321-5965

2361

Ace Spot Welder
Single phase, 13 Ga. Contact Daniel Miller with any questions 440-321-5965

2361A

Welder
Set of cutting torches on cart with Airco 9516 torch and gauges. Nice unit. Contact Daniel Miller with any questions 440-321-5965

2361B

Welding Supplies
5 rolls of new welding wire. Over 100 pieces of new welding tips, nozzles, shields. Drive roller kit. Contact Daniel Miller with any questions 440-321-5965

2361C

Pilot Valves
3 Vickers-model: 02-119460 PA5DG4S4LW-012C-B-60, 01-148462 PA5E4S4LW-016C-H-60-S471, DG4V-35-33C-M-U-H5-60. 1 Parker-model: D3W8CNYC56-30. All new condition. Contact Daniel Miller with any questions 440-321-5965

2361D

Lincoln Electric Wire-Matic 255 Welder
Code # 10166, SN: U1950418296, wire feed welder with tank complete outfit. Good working unit. Contact Daniel Miller with any questions 440-321-5965

2361E

Lincoln Ideal Arc 250 Welder
Code # 7279-0, SN: 340329, complete 1 phase. Good working unit. Contact Daniel Miller with any questions 440-321-5965

2361F

Miller 180amp Welder
SN: HD668292, with 12 hp Kohler gas motor, complete with cable leads on cart. Good working unit. Contact Daniel Miller with any questions 440-321-5965

2362

Columbian 6" Heavy Duty Vise
Swivel. In good condition. Contact Daniel Miller with any questions 440-321-5965

2362A

Multi Purpose Swivel Vise
5". In good condition. Contact Daniel Miller with any questions 440-321-5965

2362B

Vises
4 used drill press vises. In good condition. Contact Daniel Miller with any questions 440-321-5965

2362C

Stencil Machine
3/4" cap. Contact Daniel Miller with any questions 440-321-5965

2363

Welding Table with Tin Smithing Vice and Dies
48" x 62" x 31" table, 11 dies, 3/4" thick top. In good condition. Contact Daniel Miller with any questions 440-321-5965

2363A

Forming Tools
7 forming tools with 8 1/2" x 8 1/2" holder. Contact Daniel Miller with any questions 440-321-5965

2364

Wesco Pallet Jack
27" x 42". Contact Daniel Miller with any questions 440-321-5965

2366

Marshall Town Electric Slitter and Beader
36", 17 Ga. hand driven, beader/cuter hooked up to electric. Also comes with handle, approx. 15 extra dies. Contact Daniel Miller with any question 440-321-5965

2367

20 Ga. Flagler
Like new, electric. Contact Daniel Miller with any questions 440-321-5965

2368

22 Ga. Lock Former
Contact Daniel Miller with any questions 440-321-5965

2369

Hemdley Hole Puncher
#6 manual hole punch with box of extra dies. Contact Daniel Miller with any questions 440-321-5965

2370

Slip Roller
Has broken handle. Contact Daniel Miller with any questions 440-321-5965

2371

Corner Punch
Manual or air, 39 The Little Blacksmith 5" cap. Contact Daniel Miller with any questions 440-321-5965

2372

New Homemade Wood Stove
12" x 18" x 24" long. Contact Daniel Miller with any questions 440-321-5965

2373

Niagra #196 8' Sheet Metal Shear
Estimating 20 Ga. excellent condition. Contact Daniel Miller with any questions 440-321-5965

2374

Rockford 25 Ton #3R Punch Press
Contact Daniel Miller with any questions 440-321-5965

2374A

Parts Cabinet
Loaded with punches and tools. Will fit lot 2374 and other machines. Contact Daniel Miller with any questions 440-321-5965

2375

Peckstow #2 Circle Cutter and Roller
30" Niagara roller 19284. Contact Daniel Miller with any questions 440-321-5965

2375A

Thompson Sewing Machine
Model: PW-301, mini walking foot, electric drive. Contact Daniel Miller with any questions 440-321-5965

2376

2 Metal Cutting 14" Chop Saws
Porter cable model: 1400, Porter cable model 1410. Contact Daniel Miller with any questions 440-321-5965

2377

Maytag Wringer Washer
Contact Daniel Miller with any questions 440-321-5965

2377A

Maytag Wringer Washer
Completely rebuilt, with Poly Dutch Maid skirting kit, poly tub, skirting and legs, SS leg extensions. Also with aluminum leg brace kit which isn't pictured. No more rusted frame. Excellent condition. Comes with electric motor. Serviced by Miller's Maytag. Contact Daniel with any questions 440-321-5965

2377B

Maytag Wringer Washer
Completely rebuilt, with aluminum tub, skirting and legs are powder coated inside and out. Excellent condition. Comes with electric motor. Serviced by Miller's Maytag. Contact Daniel with any questions 440-321-5965

2377C

Maytag Wringer Washer
In like new or Mint condition. Original paint. Serviced with new seals by Miller's Maytag. Contact Daniel with any questions 440-321-5965

2378

Riteway Wood Stove
Model: 37. Contact Daniel Miller with any questions 440-321-5965

2379

Metal Sheets
Approx. 20 sheets, 4' x 10' 23 gauge sheet metal. Contact Daniel Miller with any questions 440-321-5965

2380

Assorted Sheet Metal
(5) 4' x 10' and (1) 4' x 7'6" white, (1) 4' x 10' 24 gauge bronze, (1) 4' x 8' 24 gauge brown and 2 smaller pieces. Contact Daniel Miller with any questions 440-321-5965

2381

New Sheet Metal
Assorted sizes of new sheet metal and (2) 36" x 72" aluminum vents. Contact Daniel Miller with any questions 440-321-5965

2381A

Skid of Patterns
Of all sorts including Cubaleos, approx 250 pieces total. Contact Daniel Miller with any questions 440-321-5965

2382

Pipe Threader
Electric pipe threader with adjustable die and misc. Contact Daniel Miller with any question 440-321-5965

2382A

Pipe Threader Set
Toledo pipe threading set, 3/8" up to 2" and electric Central Machinery threader. Contact Daniel Miller with any question 440-321-5965

2382B

Pipe Wrenches
11 pipe wrenches, 6" to 24" Ridgid, Pittsburgh aluminum, and USA Contact Daniel Miller with any question 440-321-5965

2384

2001 Wood Lathe
14" x 40" Central Machinery Lathe, 1 PH, Electric drive. Contact Daniel Miller with any questions 440-321-5965

2385

Press Rite Punch Press
Contact Daniel Miller with any questions 440-321-5965

2385A

Garage Door with Opener
12' x 20' garage door. Contact Daniel with any questions 440-321-5965

2385B

Stack of Blower Pipes
Approx. 20 total, 28", 22", 10" blower pipe and adapters up to 12' long. Assorted used pipes in good condition. Contact Daniel with any questions 440-321-5965

2385C

Blower Pipes
2 skids of 12", 10", 8", 6", 5" pipe, elbows, y's, tees, blast gates. Contact Daniel Miller with any questions 440-321-5965

2386

Rock-Drill and Chipping Hammer
Pneumatic. Good working condition.

2386A

Drill Press
Guardian Power 5/8" cap, 3/4 hp 1ph, 12 speed. In good condition. Contact Daniel Miller with any questions 440-321-5965

2387

Central Machinery Drill Press
16 speed, 5/8" cap., 1hp 1ph. In good condition. Contact Daniel Miller with any questions 440-321-5965

2388

Welding Table
39" x 65" x 38" Hamilton steel table, Precision top. Was used in printing shop. Contact Daniel Miller with any questions 440-321-5965

2389

Wrench Set
12 wrench set from 1 1/16 to 3 7/8, mostly Armstrong and Williams. USA made. Contact Daniel Miller with any question 440-321-5965

2390

Pallet of Punch Set and Misc. Dies
Don't know what the dies fit, 2 Whitney hand punches. Contact Daniel Miller with any question 440-321-5965

2391

2 Diamond Back Bikes
Like new condition. Contact Daniel Miller with any questions 440-321-5965

2391A

Quincy 7 Air Compressor
SN: 293800 S, Kohler gas motor. Working condition. Contact Daniel Miller with any questions 440-321-5965

2392

Welding Table with 2" Electric Drive Belt Sander
30" x 48" x 42" on caster. Contact Daniel Miller with any questions 440-321-5965

2392A

Welding Table
30" x 48" x 32" on caster. Contact Daniel Miller with any questions 440-321-5965

2413

Anvils
4 smaller anvils, 1 blue forge, 2 railroad iron anvils, 1 green homemade. Contact Daniel Miller with any questions 440-321-5965

2414

Fisher 147 Anvil
Fair Condition. Contact Daniel Miller with any questions 440-321-5965

2415

Forming Tools
6 forming tinsmithing tools with tool holder, 7 1/2" x 29 1/2" plate. Contact Daniel Miller with any question 440-321-5965

2416

Forming Tools
8 forming tinsmithing tools with tool holder, 7 1/2" x 29 1/2" plate. Contact Daniel Miller with any question 440-321-5965

2417

Niagra Stove Pipe Seamer
Model: 8610. Nice orginal condition. Contact Daniel Miller with any question 440-321-5965

2418

New 40 Pressurized Abrasive Sand Blaster
In box. Contact Daniel Miller with any questions 440-321-5965

2419

2002 SCMI Wide Belt Sander
Model: 10/S M3 135, SN: AE/023279, 53" wide, (2) 8" platens, 230V 3ph, electric motors have some damage and 1 cylinder arm broken. Unit has not been tested, came out of storage. (2) 29" x 56" roller extension tables-1 side panel is missing. Condition unknown. Contact Daniel Miller with any questions 440-321-5965

2420

RyoBi Saw
Model: TSS102L, 10" cap. Sliding compound. In good condition. Contact Daniel Miller with any questions 440-321-5965

2420A

New Compact Floor Bender
Max stock width 1 15/16", max stock thickness 5/16", max stock diameter 5/8". Contact Daniel Miller with any questions 440-321-5965

2421

Welding Table
Solid steel, 3" top, 30" x 43" x 25". Contact Daniel Miller with any question 440-321-5965

2421A

Welding Table
Heavy duty on casters, 1 caster broke off, 27" x 96" x 31". Contact Daniel Miller with any question 440-321-5965

2422

New Plywood
(11) 3/4" tongue-groove, some edges are damaged. Contact Daniel Miller with any question 440-321-5965

2423

Trusses
10 pieces with 12" overhang on both ends, 4 pieces with 12" over hang on 1 end, 24' trusses, 8/12 pitch. Contact Daniel Miller with any questions 440-321-5965

2423A

New Steps
13 steps, set of poplar steps, 13' l ong x 30" wide x approx. 9' high, 6 3/4" risers. Contact Daniel Miller with any question 440-321-5965

2423B

New Steps
7 steps, set of oak/pine steps, 92" long x 43 1/2" wide x approx. 6' high, 7" risers. Contact Daniel Miller with any question 440-321-5965

2423C

New Steps
3 steps, set of poplar/plywood steps, 47" long x 40" wide x 32" tall. Contact Daniel Miller with any question 440-321-5965

2424

New Hardie Shingles H25 Straight
Approx. 120 pieces .25" x 15.25" x 48", 7" EXP Monterey taupe color. Contact Daniel Miller with any questions 440-321-5965

2425

Hardie Trim 5/4 Smooth H25
Approx. 60 pieces 1" x 3.5" x 12', Robo gray color. Contact Daniel Miller with any questions 440-321-5965

2426

Hardie Trim 5/4 Smooth H25
Approx. 40 pieces 1" x 5.5" x 12', Robo gray color. Contact Daniel Miller with any questions 440-321-5965

2427

Hardie Trim 5/4 Smooth H25
19 pieces 1" x 11 1/4" x 12' and 17 pieces 1" x 7 1/4" x 12'. Robo gray color. Contact Daniel Miller with any questions 440-321-5965

2428

Vinyl Siding
4 boxes of Aspen White Crane board/vinyl siding, 14" wide, approx 8 square feet per box with corners, siding has 2.4R value insulation. Contact Daniel Miller with any questions 440-321-5965

2429

Pallet Racking
60" x 16'4" pallet racking, (5) uprights, (16) cross beams. Contact Daniel Miller with any questions 440-321-5965

2430

Pallet Racking
60" x 16'4" pallet racking, (5) uprights, (16) cross beams. Contact Daniel Miller with any questions 440-321-5965

2431

Pallet Racking
60" x 16'4" pallet racking, (5) uprights, (16) cross beams. Contact Daniel Miller with any questions 440-321-5965

2431A

Pallet Racking
(9) 60" x 16'6" upright only, tear drop style. Contact Daniel Miller with any questions 440-321-5965

2431B

Pallet Racking
(12) 60" x 16'6" upright only, tear drop style. Contact Daniel Miller with any questions 440-321-5965

2432

Heavy Duty Cart
30" x 48", 2 swivel caster and 2 stationary. Contact Daniel Miller with any questions 440-321-5965

2433

Mettler Toledo Pallet Scale
Model: IND236, 100-240V, 48" x 96". Weight capacity 5000LBS. Good working unit.

2434

Industrial Upcut Saw
Model: C500L-3-4799, electric drive, air controls, 5 hp 3 ph.

2435

Industrial Upcut Saw
Model: N510L-5-165496, electric drive, air controls, 10 hp 3 ph.

2436

Omega Chop Saw
Model: T50 350 US, 14" blade diameter, single phase, 230V and air powered. Very nice unit.

2437

Dump Hopper
48" wide x 56" long x 48" high

2437A

Dump Hopper
36" wide x 60" long x 36" high, on steel casters.

2437B

Dump Hopper
36" wide x 60" long x 36" high, on steel casters.

2438

Gardner Denver Blower
Model: 553-ADG, SN: P12098, powered by an electric motor, 25 hp 3 ph, 230/460V, 6" outlet.

2439

Hossfeld Bender
Size 2, SN: B-35070, flooring mounting plate measures 17" x 22 1/2". Does not include dies. Contact Daniel Miller with any questions 440-321-5965

2440

2 Woven Wire
2 rolls of woven wire, 48" height. Looks to be full rolls. Contact Daniel Miller with any question 440-321-5965

2441

Singer Industrial Sewing Machine
Model: 211 G155. Was used in buggy shop, line shaft ready, has no reverse. In good working condition. Contact Daniel Miller with any question 440-321-5965

2442

New Pulleys
4 blue 12" x 2 1/2" shaft x 2 1/8" wide, 4 green 11" x 1 3/16 shaft, variable speed. Contact Daniel Miller with any question 440-321-5965

2442A

Fuel Transfer Tank with 12V GPI Pump
In good condition.

2443

Cabinets
2 good used 5 drawer lateral file cabinets, 19" x 42" x 67". Contact Daniel Miller with any question 440-321-5965

2443A

Rubber Parking Lot Berms
Contact Daniel Miller with any questions 440-321-5965

2444

New Hydraulic Hose
(16) 3/4" x 8', (22) 3/4" x 6'. Contact Daniel Miller with any question 440-321-5965

2445

Skid of New Galvanized Bolts and Lags
3/8"-1/2"-5/8" diameter up to 8" long. Contact Daniel Miller with any question 440-321-5965

2445A

Skid of New Pulleys
8 total, 25" to 11". Contact Daniel Miller with any questions 440-321-5965

2445B

Skid of New Pulleys
20" to 4" and misc. sprockets. Contact Daniel Miller with any questions 440-321-5965

2446

Skid of New Sprockets
4 1/2" to 22". Contact Daniel Miller with any questions 440-321-5965

2447

New Pulleys
Total of 5, 8 1/2" x 28". Contact Daniel Miller with any questions 440-321-5965

2448

New Sprocket Repair Links
Assorted sizes from small to 200. Contact Daniel Miller with any questions 440-321-5965

2449

Skid of Roller Chains
50-1R, Morse 120H, and connector links. Contact Daniel Miller with any question 440-321-5965

2450

Skid of Banding Tools
Used banding tools and seals for plastic and metal. Contact Daniel Miller with any question 440-321-5965

2451

Strapping Tools
1 new with a part missing, 1 used metal strapping tool. Contact Daniel Miller with any question 440-321-5965

2452

Wall Mount Shop Fans
8 fans, electric drive.

2453

Craftsman Table Saw
Model: 11327520. 3/4hp electric motor, mounted on a wooden cabinet. Contact Daniel Miller with any questions 440-321-5965

2454

Misc. Poly Trim and Spindles
(10) spindles, (20) 3/8" thick x 8" wide x 72" long, various colors. Contact Daniel Miller with any questions 440-321-5965

2455

Metal Lathe
Timken roller bearing equipped, 56" long bed, 6" swing, 32" length capacity, 3 extra chucks, steady rest, chuck and gears, drive shaft is slightly bent but usable. Contact Daniel Miller with any questions 440-321-5965

2456

Rubber Mats
(10) 4' x 8' x 3/4" thick. Like new. Contact Daniel Miller with any questions 440-321-5965

2457

Hand Puncher
Model: HP-20, Woodward-Fab hand punch

2458

Magnum Pressure Washer
4000 series with heater and hose reel, powered by a Honda engine. Good unit.

2459

Forks
4" x 42" x 16", 1 1/2" thick heel. Contact Daniel Miller with any questions 440-321-5965

2460

Forks
4" x 42" x 16", 1 3/4" thick heel. Contact Daniel Miller with any questions 440-321-5965

2461

Lumber Carts
2 Hamilton oak 4' x 8' x 18" with 2 rigid 3" x 16" center wheels and (4) 2" x 8" swivel caster. In good condition. Contact Daniel Miller with any questions 440-321-5965

2462

Ellis Metal Cutting Bandsaw
Model: 1500, 3/4 hp 1 ph, 7" x 10" cutting capacity, blade size 9'6" x 3/4" x .035. In good condition. Contact Daniel with any questions 440-321-5965

2463

Reznor N6 Heater
Condition unknown. Contact Daniel with any questions 440-321-5965

2464

Reznor N6 Heater
Model: HCR6250F, 115/24V. Contact Daniel with any questions 440-321-5965

2465

Reznor N6 Heater
Model: HCR6250F, 115/24V. Condition unknown. Contact Daniel with any questions 440-321-5965

2466

Tool Box
Yellow tool chest with electric tools, 21" x 35" x 39". Working condition. Contact Daniel Miller with any questions 440-321-5965

2467

2011 Eaton Transformer
Catalog # T20P11S50EE, Type: DS-4 single phase transformer, class AA 60 hz pri volts 240/480, sec volts 120/240 KVA50. Contact Daniel Miller with any questions 440-321-5965

2468

Peerless LHM-320 Hacksaw
With a Pyrotek saw frame height control, 2 hp 3 ph. Contact Daniel Miller with any questions 440-321-5965

2469

New Pella Window
71 1/2" x 59 1/2" white wood frame, 3/4" insulating glass. Has vinyl J channel. Contact Daniel Miller with any questions 440-321-5965

2470

New Pella Window
56" x 73" almond exterior-white exterior, 6 9/16" wall depth, crank out window. Contact Daniel Miller with any questions 440-321-5965

2471

New Pella Window
56" x 73" almond exterior-white exterior, 6 9/16" wall depth, crank out window. Contact Daniel Miller with any questions 440-321-5965

2472

New Simonton Window
5500 casement picture, 88" x 67" white vinyl crank window with J channel. Contact Daniel Miller with any questions 440-321-5965

2473

New Vinyl Jeldwen Window
96 x 48 black exterior, white interior crank window. Has nailing fin. Contact Daniel Miller with any questions 440-321-5965

2474

New Vinyl Jeldwen Window
96 x 48 black exterior, white interior crank window. Has nailing fin. Contact Daniel Miller with any questions 440-321-5965

2475

New Vinyl Perfexion Window
Replacement window. 25 3/4" x 29 5/16 double hung. Contact Daniel Miller with any questions 440-321-5965

2476

New Jeldwen Window
2 windows, double hung one has a damaged frame. 30" w x 48" h wood frame painted white. Contact Daniel Miller with any questions 440-321-5965

2477

New Pella Trapezoid Windows
2 vinyl windows, 36" wide x 36" long point. Contact Daniel Miller with any questions 440-321-5965

2478

New Pella Windows
Brown 36" x 52" vinyl frame glass and 1 new 28 1/2 x 24 1/2 vinyl replacement, double hung window. Contact Daniel Miller with any questions 440-321-5965

2479

New Simonton Windows
35 1/2" x 35 1/2" double hung vinyl window with nailing flange. Contact Daniel Miller with any questions 440-321-5965

2480

New Double Doors
Solid 36" x 79" double black stained doors with no frame. Contact Daniel Miller with any questions 440-321-5965

2481

New Solid Oak Door Slad
36" x 80" and a Simonton sliding door screen on rollers, dimensions are 35 1/4" wide x 75 1/2" high. Contact Daniel Miller with any questions 440-321-5965

2482

3 Painted White Doors
30" x 80". Contact Daniel Miller with any questions 440-321-5965

2483

3 Painted White Doors
(2) 30" x 80", (1) 24" x 80". Contact Daniel Miller with any questions 440-321-5965

2484

3 White Doors
(2) 22" x 80" with 5 1/4" jamp, (1) 30" x 80" with 5 1/4" jamp. Contact Daniel Miller with any questions 440-321-5965

2485

New Grey Kraftmaid Cabinets
27" x 90" x 24" tall cabinet, 27" x 35" x 24". Contact Daniel Miller with any questions 440-321-5965

2486

New Cabinets
48" x 21" x 35" tall vanity, 12" x 12" x 36" tall corner shelf, 15" x 12" x 45" cabinet extra drawers, trim molding, and shelves. Contact Daniel Miller with any questions 440-321-5965

2487

Harrington Forklift Boom
6' long overall extends to 12', max capacity at 6' is 6000 lbs. 12'=2500 lbs. Contact Daniel Miller with any questions 440-321-5965

2488

Kelly Dock Leveler
Model: H630W, SN: D023144, 40,000 lbs capacity, 1 hp 3 ph, 6' wide x 8'9" with 16" drop, 24" high up to 56" high. Used. Contact Daniel with any questions 440-321-5965

2489

4 Metal Cabinets
36" wide x 84" high x 12" deep with shelving. Contact Daniel Miller with any questions 440-321-5965

2490

4 Metal Cabinets
36" wide x 84" high x 12" deep with shelving. Contact Daniel Miller with any questions 440-321-5965

2491

4 Metal Cabinets
36" wide x 84" high x 12" deep with shelving. Contact Daniel Miller with any questions 440-321-5965

2492

Bulk Tank
36 x 84 Copeland. Has a couple of dents on outside, approx 150 gallon, 9'4" overall length x 48" high. Contact Daniel with any questions 440-321-5965

2493

Tire Chains
Set of 2 skidder tire chains. Contact Myron Nissley with any questions 574-536-2481

2495

Engine Crane*
2000 lbs lift capacity, manual operation, mounted on casters. Contact Daniel Miller with any questions 440-321-5965

2496

Ammco Lift*
Model: B2900F, SN: P960221528, capacity 9000 lbs, lifting current 20 amps, 1 ph-60hz, power unit 31248-3, 230V. Contact Daniel Miller with any questions 440-321-5965

2497

Fuel Transfer Tank*
120 gallon capacity, 24" w x 60" l x 24" h. Contact Daniel Miller with any questions 440-321-5965

2498

Kohler Engine*
Kohler Command 25, 25 hp gas engine, electric start, no gas tank, good unit. Contact Daniel Miller with any questions 440-321-5965

2499

Power Washer and Hose Reel*
2000 psi electric washer, no wand, hose reel was used on a fire truck, loaded with high psi hose. Contact Daniel Miller with any questions 440-321-5965

2500

3 File Cabinets*
(3) 5 drawer file cabinets, 15" w x 27" d x 64" h.

2501

File Cabinet*
4 drawer file cabinet, 42" w x 19" d x 53" h

2502

3 File Cabinets*
(3) 5 drawer file cabinets, 15" w x 27" d x 64"

2503

5 File Cabinets*
(5) 2 drawer file cabinets

2504

3 File Cabinets*
(2) 4 drawer fire proof, no keys, 17" w x 30" d x 53" h. (1) 4 drawer file cabinet, 18" w x 27" d x 53" h.

2504A

10 Drawer File Cabinet*
Hardwood file cabinet. Very nice cabinet.

2505

Delta Tablesaw*
SN: 93G94359, powered by a air motor, 10" blade capacity, electric motor is included. Contact Daniel Miller with any questions 440-321-5965

2506

Powermatic 12" Planer*
Model: 100, no motor. Contact Daniel Miller with any questions 440-321-5965

2507

Grizzly Jointer*
Hydraulic drive. Contact Daniel Miller with any questions 440-321-5965

2508

Grizzly Belt/Disc Sander*
6" x 9" belt and disc sander, model: SD-69, air powered. Contact Daniel Miller with any questions 440-321-5965

2509

Compact Floor Bender*
Good condition. Contact Daniel Miller with any questions 440-321-5965

2510

DeWalt Sliding Compound Miter Saw*
SN: 11189, working condition. Contact Daniel Miller with any questions 440-321-5965

2511

Stihl Chainsaw, Air Skilsaws, and Misc.*
Stihl 026 needs tune up, 2 air powered Skilsaws, Senco stapler, die grinder, multi charging bus bar. Contact Daniel Miller with any questions 440-321-5965

2512

Electric Uupright Manlift
Model: 68003-001, SN: 15358, max platform height 40', 12V, 300 lbs lift capacity, on board charger. Actual condition of unit is unknown. Contact Daniel Miller with any questions 440-321-5965

2513

Lot of Misc.*
2 log chains, (2) 3 ton jack stands. Contact Daniel Miller with any questions 440-321-5965

2514

Lot of Misc*
2 sets of harness and tugs, 1 bipolastic, 1 leather, and surrey pole. Contact Daniel Miller with any questions 440-321-5965

2515

Table Saw*
Sears and Roebuck, model: 10323420. Contact Daniel Miller with any questions 440-321-5965

2516

Remmey Pallet Hydraulic Pak*
Mfg date 6/22/2000. Tank capacity 30 gallon, mas psi 1200, with oil cooler, powered by a 15hp electric 3 phase 230/460V motor.

2517

Hydrualic Pak*
Powered by a 10hp 3ph electric motor, with a continental pump, 4000 psi

2518

Hydrualic Tank and Motor*
7.5hp 3 phase, 230/460V

2519

Vynil Pickett Fence*
48' tall, some are 6' and 8' long and there are 9 sections including a gate section. Contact Daniel Miller with any questions 440-321-5965

2550

Walnut 4/4 Boards
5 /12" wide, lift measurements 45" wide x 7' long x 35" high. Contact Daniel with any questions 440-321-5965

2551

Walnut 4/4 Boards
5 1/2" wide x 6' long. Lift measurements 48" wide x 6' long x 19" high. Contact Daniel with any questions 440-321-5965

2552

Walnut 4/4 Boards
6" and 4" wide, 6' to 8' long. Lift measures 53" wide x 34" high. Contact Daniel with any questions 440-321-5965

2553

Walnut 4/4 Boards
5"-5 1/2" wide, 7'-6' long. Lift measures 48" wide x 31" high. Contact Daniel with any questions 440-321-5965

2554

Walnut 4/4 Boards
5 1/2" wide, 6' and 8' long. Lift measures 48" wide x 31" high. Contact Daniel with any questions 440-321-5965

2555

Walnut 4/4 Boards
5 3/4" wide, 6' and 7' long. Lift measures 50" wide x 37" high. Contact Daniel with any questions 440-321-5965

2556

Walnut 4/4 Boards
5 1/2" wide, 6'-7' and 8' long. Lift measures 47" wide x 35" high. Contact Daniel with any questions 440-321-5965

2557

Grade Outs Mixed Hardwoods
4/4 random width, lift measures 46" w x 38" h approx. 10' long. Contact Daniel Miller with any questions 440-321-5965

2558

Grade Outs Mixed Hardwoods
4/4 random width, lift measures 48" w x 40" h approx. 10' long. Contact Daniel Miller with any questions 440-321-5965

2559

Kiln Dried Grade Outs
4/4 random width and various lengths. Mostly red oak. Contact Daniel with any questions 440-321-5965

2560

Kiln Dried Grade Outs
4/4 random width and various lengths. Mostly red oak. Contact Daniel with any questions 440-321-5965

2561

Kiln Dried Grade Outs
4/4 random width and various lengths. Mostly red oak. Contact Daniel with any questions 440-321-5965

2562

Kiln Dried Grade Outs
4/4 random width and various lengths. Mostly red oak. Contact Daniel with any questions 440-321-5965

2563

Kiln Dried Grade Outs
4/4 random width and various lengths. Mixed species Contact Daniel with any questions 440-321-5965

2564

Kiln Dried Grade Outs
4/4 random width and various lengths. Mixed species Contact Daniel with any questions 440-321-5965

Photo Gallery

Share This Listing

Other Sales by
This Company

Jun 6
Orland, IN

Jun 11
Union City, MI

Jun 11
Various, IN

Jun 11
West Baden Springs, IN

Jun 11
Spencerville, IN

View all listings

Lake Erie Equipment Auction Ring 2

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704

16989 Kinsman Rd
Middlefield, OH 44062

Friday Nov 24, 2023 Completed

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.

1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
2. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
3. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
4. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
5. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Cash payments totaling Ten Thousand Dollars ($10,000) or more will not be accepted. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.

Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyer’s account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Insurance. Any work performed by Purchaser(s) or Purchaser Representative (including sub-contractors) shall be insured and provide proof of coverage against all claims for injuries against persons or damages to property which may arise from or in connection with the removal of items or equipment. Insurance coverage requirements are as follows: General Liability $1,000,000/$2,000,000 and Worker’s Compensation $1,000,000 or as required by State Law. Seller shall be listed as additionally insured, if required.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.

Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Details
Bright Star is excited to provide a consignment auction to serve your area. Our goal is to provide sellers with an easy option to turn their unused equipment into cash. We provide cutting edge marketing to earn sellers top dollar for their equipment. Buyers can be expected to be treated fairly and with absolute transparency and integrity. We look forward to working with you. 00 Information Lot Accepting consignments of quality equipment! Specializing in all heavy equipment, including construction, excavating, sawmill, forestry, trucks and trailers. Call your auction agent today to capitalize on free marketing for your equipment. 00A Information Lot For onsite crowd only! Will be sold indoors. Selling Dewalt, Milwaukee, Makita cordless tools, and new knives. Also approx. 103 lots of toys. 01 Preview & Inspection Buyers are responsible to do their own inspection to determine the condition of the items they purchase. Inspections times are available as follows: Anytime during normal business hours. Monday-Friday 8 AM - 4 PM we will be closed Thursday 11/23/23 Thanksgiving Day. Location of Auction: 16989 Kinsman Rd., Middlefield, OH 44062 02 Loadout Information* All items must be paid for before removal. FREE loadout day of auction until 4 pm and Saturday Nov 25 from 8 AM to 1 PM and for 2 weeks following the auction M-F 8 AM to 4 PM. Starting Dec 13, by appointment and for a $25 per item loadout fee. Any items not removed in 30 days become the property of the auction company. Call Daniel Wengerd 440-636-3128 or email lakeerie@brightstarauctions.com 03 Payment Information Payment terms: 6.75% sales tax on equipment. Vehicle rate depends on where the buyer is located. But OH Buyers are exempt. 10% Onsite and 13% Online Buyer's Premium in effect for all purchases. Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. 92 CAT 555D Wheel Skidder 1:50 Scale Replica - Die Cast Metal Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 98 Heavy Equipment Key Set 36 Keys Shipping available for $20 99 Manual Sealless Steel Strapping Tool Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30 2000 New 40' High Cube Multi-Door Container 40', high cube, multi-door, shipping container, 4 side doors, end doors, 9'6'' high, 8' wide 2001 2023 New One-Trip 20' Standard Container SN: ZXJU0049496 2002 2023 New One-Trip 20' Standard Container SN: RXCU1026845 2002A 2023 New One-Trip 20' Standard Container* TGSU 226867 3 2002B 2023 New One-Trip 20' Standard Container* TGSU 226781 0 2003 New 1 Cubic Yard Stackable Self Dumping Hopper with Fork Pockets Contact Bronson with any questions 574-210-3721 2004 New 2 Cubic Yard Self Dumping Hopper with Fork Pockets Contact Bronson with any questions 574-210-3721 2005 New 2 Cubic Yard Self Dumping Hopper with Fork Pockets Contact Bronson with any questions 574-210-3721 2006 New 2 Cubic Yard Self Dumping Hopper with Fork Pockets Contact Bronson with any questions 574-210-3721 2007 New 3/8" AR500 Gong Shooting Target Contact Bronson with any questions 574-210-3721 2008 New 3/8" AR500 Gong Shooting Target Contact Bronson with any questions 574-210-3721 2009 New 2 Cubic Skid Steer Hopper with Fork Pockets Contact Bronson with any questions 574-210-3721 2010 New Welding Table with Shelf 30" x 57". Contact Bronson with any questions 574-210-3721 2011 New Welding Table with Shelf 30" x 57". Contact Bronson with any questions 574-210-3721 2012 New Welding Table with Shelf 30" x 57". Contact Bronson with any questions 574-210-3721 2013 New Welding Table with Shelf 30" x 57". Contact Bronson with any questions 574-210-3721 2014 New Welding Table with Shelf 30" x 57". Contact Bronson with any questions 574-210-3721 2015 New Welding Table with Shelf 30" x 57". Contact Bronson with any questions 574-210-3721 2016 New KC Work Bench 28" x 60". Contact Bronson with any questions 574-210-3721 2017 New KC Work Bench 28" x 60". Contact Bronson with any questions 574-210-3721 2018 New KC Work Bench 28" x 60". Contact Bronson with any questions 574-210-3721 2019 New 4 Cubic Yard Debris Box Contact Bronson with any questions 574-210-3721 2020 New 4 Cubic Yard Debris Box Contact Bronson with any questions 574-210-3721 2021 50 New Safety Cones Contact Daniel Miller with any questions 440-321-5965 2080A Southern Yellow Pine Fence Posts 6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2080B Southern Yellow Pine Fence Posts 6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2080C Southern Yellow Pine Fence Posts 6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2080D Southern Yellow Pine Fence Posts 6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2080E Southern Yellow Pine Fence Posts 6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2080F Southern Yellow Pine Fence Posts 6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2080G Southern Yellow Pine Fence Posts 6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2080H Southern Yellow Pine Fence Posts 6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2080I Southern Yellow Pine Fence Posts 6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2080J Southern Yellow Pine Fence Posts 6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2081 Southern Yellow Pine Fence Posts 3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2081A Southern Yellow Pine Fence Posts 3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2081B Southern Yellow Pine Fence Posts 3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2081C Southern Yellow Pine Fence Posts 3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2081D Southern Yellow Pine Fence Posts 3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2081E Southern Yellow Pine Fence Posts 3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2081F Southern Yellow Pine Fence Posts 3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2081G Southern Yellow Pine Fence Posts 3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2081H Southern Yellow Pine Fence Posts 3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2081I Southern Yellow Pine Fence Posts 3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862 2082A New Gates 16' x 50" 6 bar, 1 3/4" tubing with hangers. Contact Daniel Miller with any questions 440-321-5965 2082B New Gates 16' x 50" 6 bar, 1 3/4" tubing with hangers. Contact Daniel Miller with any questions 440-321-5965 2082C New Gates 14' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965 2082D New Gates 14' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965 2082E New Gates 12' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965 2082F New Gates 12' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965 2082G New Gates 10' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965 2082H New Gates 10' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965 2082I New Gates 8' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965 2082J New Gates 8' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965 2082K New Gates 6' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965 2082L New Gates 6' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965 2082M New Gates 4' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965 2082N New Gates 4' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965 2083 Larch Fence Posts (35) 5 1/2" x 5 1/2" x 8'. Contact Daniel Miller with any questions 440-321-5965 2083A Larch Fence Posts (35) 5 1/2" x 5 1/2" x 8'. Contact Daniel Miller with any questions 440-321-5965 2083B Locust Boards (Approx 200) 1" x 4" x 7' long. Contact Daniel Miller with any questions 440-321-5965 2083C Locust Boards 1" x Random Width x 7" Lift measures 44" w 7' L 24" H. Contact Daniel Miller with any questions 440-321-5965 2083D Larch Boards (Approx 98) 1 3/4"-2 1/4" thick, 6" wide x 8' long. Contact Daniel Miller with any questions 440-321-5965 2085 New Chain Rack 10 spool chain, 1 spool cable, 2 spool rope on rack. Contact Daniel Miller with any question 440-321-5965 2086 Wire Rack 11 spools assorted wire on cart. 10, 12, 18 gauge. Contact Daniel Miller with any question 440-321-5965 2087 New 48" Handyman Jack Model: 485, 4660 lbs lift capacity. Contact Daniel Miller with any question 440-321-5965 2087A New 48" Hilift Jack Model: 485, 4660 lbs lift capacity. Contact Daniel Miller with any question 440-321-5965 2087B New Aluminum Shovels 6 shovels, 36" handle, mfg 2nds, 125 thick material. Contact Daniel Miller with any question 440-321-5965 2087C New Aluminum Shovels 6 shovels, 30" handle, mfg 2nds, 125 thick material. Contact Daniel Miller with any question 440-321-5965 2087D New 2 Logrite Cant Hooks 42" Peavey and 36" cant hook. Contact Daniel Miller with any question 440-321-5965 2088 Scenic View Ice cream Unit Has rebuilt JD 1 1/2 HP Hit N Miss engine with a brand new 8 quart country ice cream freezer mounted on a JD Repoduction cart. Contact Daniel Miller with any questions 440-321-5965 2089 New Chicken Coop 6' x 8' with 4 nests, metal siding and roof, 1 window, 1 man door, and 1 run out door. Contact Daniel Miller with any questions 440-321-5965 2089A New Chicken Coop 54" wide x 80" long x 50" high overall. Has a 32" wide x 50" long x 32" high house with 4 nests and metal roof. Contact Daniel Miller with any questions 440-321-5965 2090 New Corral Pen 8' x 8' sheep/calf corral with 4' gate, galvanized coating. Contact Daniel with any questions 440-321-5965 2090A New 12' Gate with Mesh 1 3/4" tubing with hangers and chain. Contact Daniel Miller with any questions 440-321-5965 2090B New Heavy Duty Galvanized Gate 10' 6 bar gate, 2" tubing. Contact Daniel Miller with any questions 440-321-5965 2090C New 10' Gate with Mesh Galvanized. Contact Daniel Miller with any questions 440-321-5965 2090D New Galvanized Gate 8' 7 bar gate, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965 2090E New Galvanized Gate 8' 7 bar gate, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965 2090F New 12' Gate with Mesh 1 3/4" tubing with hangers and chain. Contact Daniel Miller with any questions 440-321-5965 2091 New A-304-SS Auto Drinker Dual purpose Hydrant Automatic Drinking Post. Designed to replace your hydrant and have fresh water 365 days a year. Has been freeze tested down to -20 degrees Fahrenheit and did not freeze. No Electric need. Contact Daniel with any questions 440-321-5965 2091A New A-304-SS Auto Drinker Dual purpose Hydrant Automatic Drinking Post. Designed to replace your hydrant and have fresh water 365 days a year. Has been freeze tested down to -20 degrees Fahrenheit and did not freeze. No Electric need. Contact Daniel with any questions 440-321-5965 2091B New A-304-SS Auto Drinker Dual purpose Hydrant Automatic Drinking Post. Designed to replace your hydrant and have fresh water 365 days a year. Has been freeze tested down to -20 degrees Fahrenheit and did not freeze. No Electric need. Contact Daniel with any questions 440-321-5965 2091C New A-304-SS Auto Drinker Dual purpose Hydrant Automatic Drinking Post. Designed to replace your hydrant and have fresh water 365 days a year. Has been freeze tested down to -20 degrees Fahrenheit and did not freeze. No Electric need. Contact Daniel with any questions 440-321-5965 2091D New A-304-SS Auto Drinker Dual purpose Hydrant Automatic Drinking Post. Designed to replace your hydrant and have fresh water 365 days a year. Has been freeze tested down to -20 degrees Fahrenheit and did not freeze. No Electric need. Contact Daniel with any questions 440-321-5965 2092 New Booster Regulator Model: VBA11A-T02-Z, 54 pieces, input 15-145 psi, output 290 psi. Contact Daniel Miller with any questions 440-321-5965 2092A New ATV Dump Trailer* With a 36" w x 48" l x 12" d, bed 2" ball hitch. Contact Daniel Miller with any questions 440-321-5965 2092B New ATV Dump Trailer* With a 44" w x 55" l x 22" d, bed 2" ball hitch. Contact Daniel Miller with any questions 440-321-5965 2092C New ATV Dump Trailer* With hydraulic tilt and double axle with a 2" ball hitch that is broken, 50" w x 60" l x 22" d. Contact Daniel Miller with any questions 440-321-5965 2092D New Yellow Locust Post* (Approx. 88) 3 3/4" x 3 3/4" x 8'6" 2092E New Yellow Locust Post* (Approx. 88) 3 3/4" x 3 3/4" x 8'6" 2092F New Yellow Locust Post* (Approx. 88) 3 3/4" x 3 3/4" x 8'6" 2092G New Yellow Locust Post* (Approx. 88) 3 3/4" x 3 3/4" x 8'6" 2092H New Yellow Locust Post* (17) 6" x 6" x 8'6" long 2092I New Yellow Locust Post* (17) 6" x 6" x 8'6" long 2093 New 1 Yard Dumping Hopper Low profile 28" fork pocket, 64" w x 48" deep x 24" tall. USA made. Contact Daniel Miller with any questions 440-321-5965 2094 New 1 Yard Dumping Hopper 40" x 64" x 40", 29" fork pockets. USA made. Contact Daniel Miller with any questions 440-321-5965 2095 New 2 Yard Dumping Hopper 58" x 62" x 46", 30" fork pockets. USA made. Contact Daniel Miller with any questions 440-321-5965 2096 New 2 1/2 Yard Dumping Hopper 70" x 62" x 46", 30" fork pockets. USA made. Contact Daniel Miller with any questions 440-321-5965 2096A New Oak Swamp Mat 45" wide x 16' long x 7" thick. Contact Daniel Miller with any question 440-321-5965 2096B New Oak Swamp Mat 45" wide x 16' long x 7" thick. Contact Daniel Miller with any question 440-321-5965 2097 New Logging Mat (2) 10' x 7' x 7" thick. Contact Daniel Miller with any questions 440-321-5965 2098 New Logging Mat (2) 10' x 7' x 7" thick. Contact Daniel Miller with any questions 440-321-5965 2099 New Logging Mat (2) 10' x 7' x 7" thick. Contact Daniel Miller with any questions 440-321-5965 2100 1996 Arctic Cat 580 Snowmobile Meter reads: 8067 miles, 888 hours, Suzuki gas engine, fast track long travel system, condition unknown. Contact Daniel with any questions 440-321-5965 2100A 2001 Arctic Cat 600 Snowmobile Meter reads: 2347 miles, 96 hours, fast track long travel system, condition unknown. Contact Daniel with any questions 440-321-5965 2100B 2002 Polaris Indy 500 EFI Snowmobile Model: 0930674, SN: 2052347, Meter reads: 3654 miles, 0 hours, condition unknown. Contact Daniel with any questions 440-321-5965 2102 Stihl MS290 Chain Saw 18" bar, never used much, comes with aluminum case and some misc. Runs good. Contact Daniel Miller with any questions 440-321-5965 2103 Walk Behind Classen Aerator 19", powered by a Honda engine. Good working condition. 2104 Lesco Overseeder Powered by a Honda engine. In good working condition 2105 Classen Walk Behind Aerator 19", powered by a Honda engine. In good working condition. 2106 Bear Cat Crary Chipper Shredder Powered by a 7 hp G300 Honda 2107 Husqvarna 455 Rancher Chain Saw With 20" bar. Excellent condition. Contact Daniel Miller with any question 440-321-5965 2108 Echo CS 760 Chain Saw With 28" bar. Good running condition. Contact Daniel Miller with any question 440-321-5965 2109 Hilti DSH 900-X Concrete Saw 16" new blade. Contact Daniel Miller with any question 440-321-5965 2110 Honda HS724 Snow Blower 5" wide tracks, 24" wide, hand start. Ran last year. Contact Daniel Miller with any question 440-321-5965 2111 Craftsman Snow Blower 24", electric or hand start, 5 speed, left tire needs air, 5.5 hp Tecumseh. Ran last year. 2112 Roof 26" Brush Mower Model: 74300, SN: 103579, 2 blade, 7 hp B-S motor. Works good. Contact Daniel with any questions 440-321-5965 2113 Cub Cadet Hydro 1811 Riding Mower SN: 2050601U753828, with 50" mower deck, meter reads: 2481 hours, Kohler 18 gas motor, mfg date D036E. Contact Daniel with any questions 440-321-5965 2114 New 60" Mower Deck Frame Contact Daniel Miller with any questions 440-321-5965 2115 Ariens Lawn Tractor* Powered by 17.5 hp Briggs and Stratton engine, 42" deck. Runs and drives. Contact Daniel Miller with any questions 440-321-5965 2116 Craftsman Lawn Tractor* No engine, 54" mower deck with no blades, power washer no carburetor. Contact Daniel Miller with any questions 440-321-5965 2117 Huskee Lawn Tractor* LT 4200 7 speed 17.5 hp gas engine, no mower deck. Contact Daniel Miller with any questions 440-321-5965 2150 Gap Vax SV-11 Vacuum Pump SN: SV11-0076, has 50 hp electric motor. In like new condition. Contact Daniel Miller with any questions 440-321-5965 2190 Rims 4 metal rims and 5 aluminum, assorted sizes, some are new. All in a 44 x 54 metal crate. Contact Daniel Miller with any questions 440-321-5965 2191 Tires 6 used tires, assorted sizes. 11R22.5, 7.50-16LT, LT235/85 R16, 300-15, LT 235/85 R16, 11R22.5. Contact Daniel Miller with any questions 440-321-5965 2192 Tires 6 tires, 2 with aluminum rims. LT235/85 R16, P255/65R16, LT235/85 R16, ST 205/75 D14, 215/65 R16, 8-14.5. Contact Daniel Miller with any questions 440-321-5965 2193 Tires 4 total, 2 Dynamic 225/70R19.5 with rim, 1 Gladiator 225/70R19.5 only tire, 1 Double Coin 10R17.5 RT500 with rim. Contact Daniel Miller with any questions 440-321-5965 2194 Tires 4 Firestone LT245/75 R17, 2 with rims and 2 only tires. Contact Daniel Miller with any questions 440-321-5965 2195 Tires 4 BF Good Rich All-Terrain LT245/70R17, tires only. Contact Daniel Miller with any questions 440-321-5965 2196 Tires 6 total, 2 Firestone LT245/75R17 metal rim, 4 Mastercraft LT265/75R16 metal rim. Contact Daniel Miller with any questions 440-321-5965 2197 Tires 2 Good Year 445/50R 22.5, tire only. Contact Daniel Miller with any questions 440-321-5965 2198 Tires 4 Michelin LT 275/65R20 with aluminum rims. Contact Daniel Miller with any questions 440-321-5965 2199 Tires 6 used 285/75R 24.5 with aluminum rim. Contact Daniel Miller with any questions 440-321-5965 2200 Truck Tires General Grabbers size: 275/60 R20 2201 3 Truck Tires and Rims 1 tire and rim at 13.6-28, 2 tires and rims at 16.9-24 2202 Skid Loader Rims and Tires Set of 4, solid rubber 10-16.5 NHS with 8 lug rims. 2203 Skid Loader Rims and Tires Set of 4, 3 with tires, 8 lug rims, 12-16.5 NHS 2204 Used Rubber Track 1-12" W Solid Deal 07-353-3-5410 for a mini excavator. 2205 4 Tires 3 backhoe tires 19.5L-24, 1 tractor tire 16.9-24 2299 Air Tank Refurbished 1000 gallon air tank, 4' wide x 17' long x 46" high. In good condition. Contact Daniel Miller with any questions 440-321-5965 2300 Herkules Air Lift Table 39" x 50", 6000 lbs capacity, 5" lowered, raised up to 24". In working condition. Contact Daniel Miller with any questions 440-321-5965 2301 Herkules Air Lift Table 39" x 50", 6000 lbs capacity, 5" lowered, raised up to 24". In working condition. Contact Daniel Miller with any questions 440-321-5965 2302 Vibrating Conveyor Model: 412861, SN: 90-61188, Like new stainless steel, 24" w x 8' l x 36" h, 42" overall width, 1 hp 3 ph. Contact Daniel Miller with any questions 440-321-5965 2303 Vibrating Conveyor Model: 429821, SN: 01-65313, Key like new stainless steel 26" w x 12' l x 39" h, 48" overall width. Contact Daniel Miller with any questions 440-321-5965 2304 Welding Table 28" x 51" x 37" with T slot, nice heavy duty. Contact Daniel Miller with any questions 440-321-5965 2305 Lincoln Ideal Arc 250 Welder Model: AC-250, SN 586602, 1 ph, 230/460V, condition unknown. Contact Daniel Miller with any questions 440-321-5965 2306 Line Shaft 3 sections totaling 48' of 1 1/4" line shaft mount on 4"x6" channel. Contact Daniel Miller with any questions 440-321-5965 2307 Fuel Tank 38" x 60" fuel tank on stand, 76" high stand, in good condition. Contact Daniel Miller with any questions 440-321-5965 2307A Pipe Fittings (5) 6" x 8" magnets, 1 box of brass, S.S., steel air/pipe fittings. Contact Daniel Miller with any questions 440-321-5965 2308 Machinist Parts Assorted rails and liner way glides, 3 boxes assorted reamers, SPI OBI Cam clamp assy. Contact Daniel Miller with any questions 440-321-5965 2309 Machinist Parts Assorted calipers, indicators, air tools, brass fittings, cutoff blades, misc. Contact Daniel Miller with any questions 440-321-5965 2310 Machinist Parts Electric motor, hold downs, sheet cutting torch, foot controls, repeat o-meter, misc. Contact Daniel Miller with any questions 440-321-5965 2311 Machinist Parts 225" x 50" aluminum cart, air suction cup, Emerson control unit, model SP312 drilling/tapping head. Contact Daniel Miller with any questions 440-321-5965 2312 Machinist Parts Like new L type boring tool holder, AC/DC inverter, power supply electric tools, air sander, 7" sanding flap disc. Contact Daniel Miller with any questions 440-321-5965 2313 Machinist Parts Assorted handles, gears, cutlers, vice, reamers, rigid pipe threader. Contact Daniel Miller with any questions 440-321-5965 2314 Machinist Parts 26" fan blade, drill bits, flat pulleys, tapping unit, 3 jaw chuck, hydraulic motor. Contact Daniel Miller with any questions 440-321-5965 2315 Machinist Parts Plastic Sch.80 pipe fittings, door locks, hand miter saws. Contact Daniel Miller with any questions 440-321-5965 2316 Machinist Parts Assorted of aluminum handles, machinist cutters, gauges, welding torches and gauges. Contact Daniel Miller with any questions 440-321-5965 2317 Machinist Parts Toggle clamp, bearings, glides, pins, cutting fluid, misc. Contact Daniel Miller with any questions 440-321-5965 2318 Machinist Parts 15" Skinner 3 jaw chuck, high pressure hoses, key cutters, Toleda scale. Contact Daniel Miller with any questions 440-321-5965 2319 Machinist Parts Saw blades, knobs, buffers, drawer slides, misc. Contact Daniel Miller with any questions 440-321-5965 2320 Machinist Parts Pipe vice, steady rest, hydraulic generator, tee post pounders. Contact Daniel Miller with any questions 440-321-5965 2321 Lincoln Welder 300 amp, 220V, 3 ph, on wheels, condition unknown. Contact Daniel Miller with any questions 440-321-5965 2322 Doringer 350 Chop Saw 1.6 hp, 3 ph, 220V, motor has some damage, 13" blade, 3 extra blades, condition unknown. Contact Daniel Miller with any questions 440-321-5965 2323 Buffalo 18 Drill Press 33" x 35" stand, 3 ph electric drive, condition unknown. Contact Daniel Miller with any questions 440-321-5965 2324 Abrsaive #3 Surface Grinder 7" grinder, 56" long bed, electric motor with flat belt drive, old cast iron base, condition unknown. Contact Daniel Miller with any questions 440-321-5965 2325 Southworth Lift Table 4' x 4' x 38" high with rotating top, electric drive, 460V, 3 ph, condition unknown. Contact Daniel Miller with any questions 440-321-5965 2326 Fot Burt-Hammond Raidal Arm Drill Press Model: 643, SN: 1804, variable speed, 35" x 72" x 86" tall, nice older unit, condition unknown. Contact Daniel Miller with any questions 440-321-5965 2327 Iron Worker Buffalo 1/2 Universal Mechanical belt drive, shears 1/2" plate, 6" x 5/8" flats, punch 1" x 5/8 or 7/8 x 3/4 up to 4" x 4 1/2" angle. Good solid unit, condition unknown. Contact Daniel with any questions 440-321-5965 2328 Lincoln SAE-300 DC Welder Code: 6963, SN: A-753498 diesel powered 4 cylinder, condition unknown. Contact Daniel Miller with any questions 440-321-5965 2329 Torit Donaldson AT-3000 Filter System 2 unit, SN: IC748263, 3 hp, 3 ph, 208/460V. Contact Daniel Miller with any questions 440-321-5965 2330 Torit Donaldson AT-3000 Filter System 2 unit. Contact Daniel Miller with any questions 440-321-5965 2331 Safety Kleen Parts Washer 54" L x 41 1/2" W x 77" H, 1 roll 5/8" cable, condition unknown. Contact Daniel Miller with any questions 440-321-5965 2332 Storage Rack 12 tank capacity propane storage rack, 46" L x 41" W x 72" H. Contact Daniel Miller with any questions 440-321-5965 2333 Super Cage Crane Safety Cage Model: S-36, SN: C22032, Weights: 390 lbs. 3 person capacity, 36" L x 36" W x 94" H. Contact Daniel Miller with any questions 440-321-5965 2334 2010 Knight Global Lift Table 4000 lbs capacity, air operated lifts, 40" tall, 52" x 64" swiveling top, 13" tall when lowered. Contact Daniel Miller with any questions 440-321-5965 2335 Gray PL-1000 Lift Table 42" x 60" platform, air operated, condition unknown. Contact Daniel Miller with any questions 440-321-5965 2336 Garden Tractor Lift Table 42" x 60" platform, air operated, 1000 lbs capacity. Contact Daniel Miller with any questions 440-321-5965 2337 Cherry Picker with 8 Ton Hydraulic Jack Contact Daniel Miller with any questions 440-321-5965 2338 Welding Carts 1 steel wheel and 2 rubber wheel tank carts. Contact Daniel Miller with any questions 440-321-5965 2339 Welding Cart 2 Solid Rubber tank carts. Contact Daniel Miller with any questions 440-321-5965 2340 Parts Bins (21) 10" x 20" x 8" parts bins. Contact Daniel Miller with any questions 440-321-5965 2341 Parts Bins (Approx 40) 10" x 20" x 8" parts bins. Contact Daniel Miller with any questions 440-321-5965 2342 Parts Bins (28) 10" x 20" x 8" parts bins. Contact Daniel Miller with any questions 440-321-5965 2343 Parts Bins (20) 20" x 12" x 10" parts bins. Contact Daniel Miller with any questions 440-321-5965 2344 Parts Bins (20) 20" x 12" x 10" parts bins. Contact Daniel Miller with any questions 440-321-5965 2345 Parts Bins (00) 20" x 12" x 10" parts bins. Contact Daniel Miller with any questions 440-321-5965 2346 Air and Water Hose With Husky air operated water pump, condition unknown. Contact Daniel Miller with any questions 440-321-5965 2347 Wegoma Blower and Cyclone 8" inlet, 5 1/2" x 8" outlet, 16" diameter, line shaft setup, cyclone 6" outlet, 65" long. Contact Daniel Miller with any questions 440-321-5965 2348 Hidden View Water Pumps 2 pumps, in good condition. Contact Daniel Miller with any questions 440-321-5965 2349 Band Saw Blades Approx 30 pieces 20'7" x 1 1/2" super sharp and monk for brand. About 15 pieces have been resharpened. Were used on band saw. Contact Daniel Miller with any questions 440-321-5965 2350 40 Ton Scotchman Iron Worker Model: 4014T, 3 hp, 1 ph, 220 Volt. Contact Daniel Miller with any questions 440-321-5965 2351 Wilton Metal Cutting Band Saw 3/4 hp single phase. Contact Daniel Miller with any questions 440-321-5965 2352 12 Ton Bantam Brake 60" Cut With different dies Max air pressure, 110 psi. Contact Daniel Miller with any questions 440-321-5965 2353 Compact Bender Model: S31980, used, with 8 round dies. In good condition. Contact Daniel Miller with any questions 440-321-5965 2354 52" Tenn Smith Sheet Metal Shear Manual or air operated, 16 gallon. Contact Daniel Miller with any questions 440-321-5965 2355 8' Chicago Hand Brake Contact Daniel Miller with any questions 440-321-5965 2356 Tennsmith Hand Finger Brake 4', 16 Ga. Contact Daniel Miller with any questions 440-321-5965 2357 30" Niagra Bar Folder Mounted on a 4' x 10' x 32" table. Contact Daniel Miller with any questions 440-321-5965 2358 Pex Stow Notcher 16 Ga. air powered. Contact Daniel Miller with any questions 440-321-5965 2359 Hand Tools 3 Niagara, Pexto beader, cutter. Contact Daniel Miller with any questions 440-321-5965 2359A Crimper 3 Niagara crimper, cutter, beader with extra dies. Contact Daniel Miller with any questions 440-321-5965 2359B Crimper Model: 10019 Niagara pipe crimper. Contact Daniel Miller with any questions 440-321-5965 2359C Edger Lock former easy edger. Contact Daniel Miller with any questions 440-321-5965 2359D Crimper Niagara cutter, crimper, beader. All in 1 tool. Contact Daniel Miller with any questions 440-321-5965 2359E Shear Marshall Town 18 throatless shear. Contact Daniel Miller with any questions 440-321-5965 2359F Shear Hand shear and older crimper, beader, cutter parts and dies. Contact Daniel Miller with any questions 440-321-5965 2360 Generator Meter reads: 43 hours. Like new Whole House generator, Kohler 20hp gas electric start motor with 10000 BDG 120/240V-40 amp, all on 4 wheel cart. Contact Daniel Miller with any questions 440-321-5965 2360A Generator UST 3200/4200 W, 120V, 1 ph gas 196 cc, on wheel cart with cover. Looks like new. Contact Daniel Miller with any questions 440-321-5965 2360B New Chicago Generator 10KW belt driven generator, Model: 45416. Contact Daniel Miller with any questions 440-321-5965 2361 Ace Spot Welder Single phase, 13 Ga. Contact Daniel Miller with any questions 440-321-5965 2361A Welder Set of cutting torches on cart with Airco 9516 torch and gauges. Nice unit. Contact Daniel Miller with any questions 440-321-5965 2361B Welding Supplies 5 rolls of new welding wire. Over 100 pieces of new welding tips, nozzles, shields. Drive roller kit. Contact Daniel Miller with any questions 440-321-5965 2361C Pilot Valves 3 Vickers-model: 02-119460 PA5DG4S4LW-012C-B-60, 01-148462 PA5E4S4LW-016C-H-60-S471, DG4V-35-33C-M-U-H5-60. 1 Parker-model: D3W8CNYC56-30. All new condition. Contact Daniel Miller with any questions 440-321-5965 2361D Lincoln Electric Wire-Matic 255 Welder Code # 10166, SN: U1950418296, wire feed welder with tank complete outfit. Good working unit. Contact Daniel Miller with any questions 440-321-5965 2361E Lincoln Ideal Arc 250 Welder Code # 7279-0, SN: 340329, complete 1 phase. Good working unit. Contact Daniel Miller with any questions 440-321-5965 2361F Miller 180amp Welder SN: HD668292, with 12 hp Kohler gas motor, complete with cable leads on cart. Good working unit. Contact Daniel Miller with any questions 440-321-5965 2362 Columbian 6" Heavy Duty Vise Swivel. In good condition. Contact Daniel Miller with any questions 440-321-5965 2362A Multi Purpose Swivel Vise 5". In good condition. Contact Daniel Miller with any questions 440-321-5965 2362B Vises 4 used drill press vises. In good condition. Contact Daniel Miller with any questions 440-321-5965 2362C Stencil Machine 3/4" cap. Contact Daniel Miller with any questions 440-321-5965 2363 Welding Table with Tin Smithing Vice and Dies 48" x 62" x 31" table, 11 dies, 3/4" thick top. In good condition. Contact Daniel Miller with any questions 440-321-5965 2363A Forming Tools 7 forming tools with 8 1/2" x 8 1/2" holder. Contact Daniel Miller with any questions 440-321-5965 2364 Wesco Pallet Jack 27" x 42". Contact Daniel Miller with any questions 440-321-5965 2366 Marshall Town Electric Slitter and Beader 36", 17 Ga. hand driven, beader/cuter hooked up to electric. Also comes with handle, approx. 15 extra dies. Contact Daniel Miller with any question 440-321-5965 2367 20 Ga. Flagler Like new, electric. Contact Daniel Miller with any questions 440-321-5965 2368 22 Ga. Lock Former Contact Daniel Miller with any questions 440-321-5965 2369 Hemdley Hole Puncher #6 manual hole punch with box of extra dies. Contact Daniel Miller with any questions 440-321-5965 2370 Slip Roller Has broken handle. Contact Daniel Miller with any questions 440-321-5965 2371 Corner Punch Manual or air, 39 The Little Blacksmith 5" cap. Contact Daniel Miller with any questions 440-321-5965 2372 New Homemade Wood Stove 12" x 18" x 24" long. Contact Daniel Miller with any questions 440-321-5965 2373 Niagra #196 8' Sheet Metal Shear Estimating 20 Ga. excellent condition. Contact Daniel Miller with any questions 440-321-5965 2374 Rockford 25 Ton #3R Punch Press Contact Daniel Miller with any questions 440-321-5965 2374A Parts Cabinet Loaded with punches and tools. Will fit lot 2374 and other machines. Contact Daniel Miller with any questions 440-321-5965 2375 Peckstow #2 Circle Cutter and Roller 30" Niagara roller 19284. Contact Daniel Miller with any questions 440-321-5965 2375A Thompson Sewing Machine Model: PW-301, mini walking foot, electric drive. Contact Daniel Miller with any questions 440-321-5965 2376 2 Metal Cutting 14" Chop Saws Porter cable model: 1400, Porter cable model 1410. Contact Daniel Miller with any questions 440-321-5965 2377 Maytag Wringer Washer Contact Daniel Miller with any questions 440-321-5965 2377A Maytag Wringer Washer Completely rebuilt, with Poly Dutch Maid skirting kit, poly tub, skirting and legs, SS leg extensions. Also with aluminum leg brace kit which isn't pictured. No more rusted frame. Excellent condition. Comes with electric motor. Serviced by Miller's Maytag. Contact Daniel with any questions 440-321-5965 2377B Maytag Wringer Washer Completely rebuilt, with aluminum tub, skirting and legs are powder coated inside and out. Excellent condition. Comes with electric motor. Serviced by Miller's Maytag. Contact Daniel with any questions 440-321-5965 2377C Maytag Wringer Washer In like new or Mint condition. Original paint. Serviced with new seals by Miller's Maytag. Contact Daniel with any questions 440-321-5965 2378 Riteway Wood Stove Model: 37. Contact Daniel Miller with any questions 440-321-5965 2379 Metal Sheets Approx. 20 sheets, 4' x 10' 23 gauge sheet metal. Contact Daniel Miller with any questions 440-321-5965 2380 Assorted Sheet Metal (5) 4' x 10' and (1) 4' x 7'6" white, (1) 4' x 10' 24 gauge bronze, (1) 4' x 8' 24 gauge brown and 2 smaller pieces. Contact Daniel Miller with any questions 440-321-5965 2381 New Sheet Metal Assorted sizes of new sheet metal and (2) 36" x 72" aluminum vents. Contact Daniel Miller with any questions 440-321-5965 2381A Skid of Patterns Of all sorts including Cubaleos, approx 250 pieces total. Contact Daniel Miller with any questions 440-321-5965 2382 Pipe Threader Electric pipe threader with adjustable die and misc. Contact Daniel Miller with any question 440-321-5965 2382A Pipe Threader Set Toledo pipe threading set, 3/8" up to 2" and electric Central Machinery threader. Contact Daniel Miller with any question 440-321-5965 2382B Pipe Wrenches 11 pipe wrenches, 6" to 24" Ridgid, Pittsburgh aluminum, and USA Contact Daniel Miller with any question 440-321-5965 2384 2001 Wood Lathe 14" x 40" Central Machinery Lathe, 1 PH, Electric drive. Contact Daniel Miller with any questions 440-321-5965 2385 Press Rite Punch Press Contact Daniel Miller with any questions 440-321-5965 2385A Garage Door with Opener 12' x 20' garage door. Contact Daniel with any questions 440-321-5965 2385B Stack of Blower Pipes Approx. 20 total, 28", 22", 10" blower pipe and adapters up to 12' long. Assorted used pipes in good condition. Contact Daniel with any questions 440-321-5965 2385C Blower Pipes 2 skids of 12", 10", 8", 6", 5" pipe, elbows, y's, tees, blast gates. Contact Daniel Miller with any questions 440-321-5965 2386 Rock-Drill and Chipping Hammer Pneumatic. Good working condition. 2386A Drill Press Guardian Power 5/8" cap, 3/4 hp 1ph, 12 speed. In good condition. Contact Daniel Miller with any questions 440-321-5965 2387 Central Machinery Drill Press 16 speed, 5/8" cap., 1hp 1ph. In good condition. Contact Daniel Miller with any questions 440-321-5965 2388 Welding Table 39" x 65" x 38" Hamilton steel table, Precision top. Was used in printing shop. Contact Daniel Miller with any questions 440-321-5965 2389 Wrench Set 12 wrench set from 1 1/16 to 3 7/8, mostly Armstrong and Williams. USA made. Contact Daniel Miller with any question 440-321-5965 2390 Pallet of Punch Set and Misc. Dies Don't know what the dies fit, 2 Whitney hand punches. Contact Daniel Miller with any question 440-321-5965 2391 2 Diamond Back Bikes Like new condition. Contact Daniel Miller with any questions 440-321-5965 2391A Quincy 7 Air Compressor SN: 293800 S, Kohler gas motor. Working condition. Contact Daniel Miller with any questions 440-321-5965 2392 Welding Table with 2" Electric Drive Belt Sander 30" x 48" x 42" on caster. Contact Daniel Miller with any questions 440-321-5965 2392A Welding Table 30" x 48" x 32" on caster. Contact Daniel Miller with any questions 440-321-5965 2413 Anvils 4 smaller anvils, 1 blue forge, 2 railroad iron anvils, 1 green homemade. Contact Daniel Miller with any questions 440-321-5965 2414 Fisher 147 Anvil Fair Condition. Contact Daniel Miller with any questions 440-321-5965 2415 Forming Tools 6 forming tinsmithing tools with tool holder, 7 1/2" x 29 1/2" plate. Contact Daniel Miller with any question 440-321-5965 2416 Forming Tools 8 forming tinsmithing tools with tool holder, 7 1/2" x 29 1/2" plate. Contact Daniel Miller with any question 440-321-5965 2417 Niagra Stove Pipe Seamer Model: 8610. Nice orginal condition. Contact Daniel Miller with any question 440-321-5965 2418 New 40 Pressurized Abrasive Sand Blaster In box. Contact Daniel Miller with any questions 440-321-5965 2419 2002 SCMI Wide Belt Sander Model: 10/S M3 135, SN: AE/023279, 53" wide, (2) 8" platens, 230V 3ph, electric motors have some damage and 1 cylinder arm broken. Unit has not been tested, came out of storage. (2) 29" x 56" roller extension tables-1 side panel is missing. Condition unknown. Contact Daniel Miller with any questions 440-321-5965 2420 RyoBi Saw Model: TSS102L, 10" cap. Sliding compound. In good condition. Contact Daniel Miller with any questions 440-321-5965 2420A New Compact Floor Bender Max stock width 1 15/16", max stock thickness 5/16", max stock diameter 5/8". Contact Daniel Miller with any questions 440-321-5965 2421 Welding Table Solid steel, 3" top, 30" x 43" x 25". Contact Daniel Miller with any question 440-321-5965 2421A Welding Table Heavy duty on casters, 1 caster broke off, 27" x 96" x 31". Contact Daniel Miller with any question 440-321-5965 2422 New Plywood (11) 3/4" tongue-groove, some edges are damaged. Contact Daniel Miller with any question 440-321-5965 2423 Trusses 10 pieces with 12" overhang on both ends, 4 pieces with 12" over hang on 1 end, 24' trusses, 8/12 pitch. Contact Daniel Miller with any questions 440-321-5965 2423A New Steps 13 steps, set of poplar steps, 13' l ong x 30" wide x approx. 9' high, 6 3/4" risers. Contact Daniel Miller with any question 440-321-5965 2423B New Steps 7 steps, set of oak/pine steps, 92" long x 43 1/2" wide x approx. 6' high, 7" risers. Contact Daniel Miller with any question 440-321-5965 2423C New Steps 3 steps, set of poplar/plywood steps, 47" long x 40" wide x 32" tall. Contact Daniel Miller with any question 440-321-5965 2424 New Hardie Shingles H25 Straight Approx. 120 pieces .25" x 15.25" x 48", 7" EXP Monterey taupe color. Contact Daniel Miller with any questions 440-321-5965 2425 Hardie Trim 5/4 Smooth H25 Approx. 60 pieces 1" x 3.5" x 12', Robo gray color. Contact Daniel Miller with any questions 440-321-5965 2426 Hardie Trim 5/4 Smooth H25 Approx. 40 pieces 1" x 5.5" x 12', Robo gray color. Contact Daniel Miller with any questions 440-321-5965 2427 Hardie Trim 5/4 Smooth H25 19 pieces 1" x 11 1/4" x 12' and 17 pieces 1" x 7 1/4" x 12'. Robo gray color. Contact Daniel Miller with any questions 440-321-5965 2428 Vinyl Siding 4 boxes of Aspen White Crane board/vinyl siding, 14" wide, approx 8 square feet per box with corners, siding has 2.4R value insulation. Contact Daniel Miller with any questions 440-321-5965 2429 Pallet Racking 60" x 16'4" pallet racking, (5) uprights, (16) cross beams. Contact Daniel Miller with any questions 440-321-5965 2430 Pallet Racking 60" x 16'4" pallet racking, (5) uprights, (16) cross beams. Contact Daniel Miller with any questions 440-321-5965 2431 Pallet Racking 60" x 16'4" pallet racking, (5) uprights, (16) cross beams. Contact Daniel Miller with any questions 440-321-5965 2431A Pallet Racking (9) 60" x 16'6" upright only, tear drop style. Contact Daniel Miller with any questions 440-321-5965 2431B Pallet Racking (12) 60" x 16'6" upright only, tear drop style. Contact Daniel Miller with any questions 440-321-5965 2432 Heavy Duty Cart 30" x 48", 2 swivel caster and 2 stationary. Contact Daniel Miller with any questions 440-321-5965 2433 Mettler Toledo Pallet Scale Model: IND236, 100-240V, 48" x 96". Weight capacity 5000LBS. Good working unit. 2434 Industrial Upcut Saw Model: C500L-3-4799, electric drive, air controls, 5 hp 3 ph. 2435 Industrial Upcut Saw Model: N510L-5-165496, electric drive, air controls, 10 hp 3 ph. 2436 Omega Chop Saw Model: T50 350 US, 14" blade diameter, single phase, 230V and air powered. Very nice unit. 2437 Dump Hopper 48" wide x 56" long x 48" high 2437A Dump Hopper 36" wide x 60" long x 36" high, on steel casters. 2437B Dump Hopper 36" wide x 60" long x 36" high, on steel casters. 2438 Gardner Denver Blower Model: 553-ADG, SN: P12098, powered by an electric motor, 25 hp 3 ph, 230/460V, 6" outlet. 2439 Hossfeld Bender Size 2, SN: B-35070, flooring mounting plate measures 17" x 22 1/2". Does not include dies. Contact Daniel Miller with any questions 440-321-5965 2440 2 Woven Wire 2 rolls of woven wire, 48" height. Looks to be full rolls. Contact Daniel Miller with any question 440-321-5965 2441 Singer Industrial Sewing Machine Model: 211 G155. Was used in buggy shop, line shaft ready, has no reverse. In good working condition. Contact Daniel Miller with any question 440-321-5965 2442 New Pulleys 4 blue 12" x 2 1/2" shaft x 2 1/8" wide, 4 green 11" x 1 3/16 shaft, variable speed. Contact Daniel Miller with any question 440-321-5965 2442A Fuel Transfer Tank with 12V GPI Pump In good condition. 2443 Cabinets 2 good used 5 drawer lateral file cabinets, 19" x 42" x 67". Contact Daniel Miller with any question 440-321-5965 2443A Rubber Parking Lot Berms Contact Daniel Miller with any questions 440-321-5965 2444 New Hydraulic Hose (16) 3/4" x 8', (22) 3/4" x 6'. Contact Daniel Miller with any question 440-321-5965 2445 Skid of New Galvanized Bolts and Lags 3/8"-1/2"-5/8" diameter up to 8" long. Contact Daniel Miller with any question 440-321-5965 2445A Skid of New Pulleys 8 total, 25" to 11". Contact Daniel Miller with any questions 440-321-5965 2445B Skid of New Pulleys 20" to 4" and misc. sprockets. Contact Daniel Miller with any questions 440-321-5965 2446 Skid of New Sprockets 4 1/2" to 22". Contact Daniel Miller with any questions 440-321-5965 2447 New Pulleys Total of 5, 8 1/2" x 28". Contact Daniel Miller with any questions 440-321-5965 2448 New Sprocket Repair Links Assorted sizes from small to 200. Contact Daniel Miller with any questions 440-321-5965 2449 Skid of Roller Chains 50-1R, Morse 120H, and connector links. Contact Daniel Miller with any question 440-321-5965 2450 Skid of Banding Tools Used banding tools and seals for plastic and metal. Contact Daniel Miller with any question 440-321-5965 2451 Strapping Tools 1 new with a part missing, 1 used metal strapping tool. Contact Daniel Miller with any question 440-321-5965 2452 Wall Mount Shop Fans 8 fans, electric drive. 2453 Craftsman Table Saw Model: 11327520. 3/4hp electric motor, mounted on a wooden cabinet. Contact Daniel Miller with any questions 440-321-5965 2454 Misc. Poly Trim and Spindles (10) spindles, (20) 3/8" thick x 8" wide x 72" long, various colors. Contact Daniel Miller with any questions 440-321-5965 2455 Metal Lathe Timken roller bearing equipped, 56" long bed, 6" swing, 32" length capacity, 3 extra chucks, steady rest, chuck and gears, drive shaft is slightly bent but usable. Contact Daniel Miller with any questions 440-321-5965 2456 Rubber Mats (10) 4' x 8' x 3/4" thick. Like new. Contact Daniel Miller with any questions 440-321-5965 2457 Hand Puncher Model: HP-20, Woodward-Fab hand punch 2458 Magnum Pressure Washer 4000 series with heater and hose reel, powered by a Honda engine. Good unit. 2459 Forks 4" x 42" x 16", 1 1/2" thick heel. Contact Daniel Miller with any questions 440-321-5965 2460 Forks 4" x 42" x 16", 1 3/4" thick heel. Contact Daniel Miller with any questions 440-321-5965 2461 Lumber Carts 2 Hamilton oak 4' x 8' x 18" with 2 rigid 3" x 16" center wheels and (4) 2" x 8" swivel caster. In good condition. Contact Daniel Miller with any questions 440-321-5965 2462 Ellis Metal Cutting Bandsaw Model: 1500, 3/4 hp 1 ph, 7" x 10" cutting capacity, blade size 9'6" x 3/4" x .035. In good condition. Contact Daniel with any questions 440-321-5965 2463 Reznor N6 Heater Condition unknown. Contact Daniel with any questions 440-321-5965 2464 Reznor N6 Heater Model: HCR6250F, 115/24V. Contact Daniel with any questions 440-321-5965 2465 Reznor N6 Heater Model: HCR6250F, 115/24V. Condition unknown. Contact Daniel with any questions 440-321-5965 2466 Tool Box Yellow tool chest with electric tools, 21" x 35" x 39". Working condition. Contact Daniel Miller with any questions 440-321-5965 2467 2011 Eaton Transformer Catalog # T20P11S50EE, Type: DS-4 single phase transformer, class AA 60 hz pri volts 240/480, sec volts 120/240 KVA50. Contact Daniel Miller with any questions 440-321-5965 2468 Peerless LHM-320 Hacksaw With a Pyrotek saw frame height control, 2 hp 3 ph. Contact Daniel Miller with any questions 440-321-5965 2469 New Pella Window 71 1/2" x 59 1/2" white wood frame, 3/4" insulating glass. Has vinyl J channel. Contact Daniel Miller with any questions 440-321-5965 2470 New Pella Window 56" x 73" almond exterior-white exterior, 6 9/16" wall depth, crank out window. Contact Daniel Miller with any questions 440-321-5965 2471 New Pella Window 56" x 73" almond exterior-white exterior, 6 9/16" wall depth, crank out window. Contact Daniel Miller with any questions 440-321-5965 2472 New Simonton Window 5500 casement picture, 88" x 67" white vinyl crank window with J channel. Contact Daniel Miller with any questions 440-321-5965 2473 New Vinyl Jeldwen Window 96 x 48 black exterior, white interior crank window. Has nailing fin. Contact Daniel Miller with any questions 440-321-5965 2474 New Vinyl Jeldwen Window 96 x 48 black exterior, white interior crank window. Has nailing fin. Contact Daniel Miller with any questions 440-321-5965 2475 New Vinyl Perfexion Window Replacement window. 25 3/4" x 29 5/16 double hung. Contact Daniel Miller with any questions 440-321-5965 2476 New Jeldwen Window 2 windows, double hung one has a damaged frame. 30" w x 48" h wood frame painted white. Contact Daniel Miller with any questions 440-321-5965 2477 New Pella Trapezoid Windows 2 vinyl windows, 36" wide x 36" long point. Contact Daniel Miller with any questions 440-321-5965 2478 New Pella Windows Brown 36" x 52" vinyl frame glass and 1 new 28 1/2 x 24 1/2 vinyl replacement, double hung window. Contact Daniel Miller with any questions 440-321-5965 2479 New Simonton Windows 35 1/2" x 35 1/2" double hung vinyl window with nailing flange. Contact Daniel Miller with any questions 440-321-5965 2480 New Double Doors Solid 36" x 79" double black stained doors with no frame. Contact Daniel Miller with any questions 440-321-5965 2481 New Solid Oak Door Slad 36" x 80" and a Simonton sliding door screen on rollers, dimensions are 35 1/4" wide x 75 1/2" high. Contact Daniel Miller with any questions 440-321-5965 2482 3 Painted White Doors 30" x 80". Contact Daniel Miller with any questions 440-321-5965 2483 3 Painted White Doors (2) 30" x 80", (1) 24" x 80". Contact Daniel Miller with any questions 440-321-5965 2484 3 White Doors (2) 22" x 80" with 5 1/4" jamp, (1) 30" x 80" with 5 1/4" jamp. Contact Daniel Miller with any questions 440-321-5965 2485 New Grey Kraftmaid Cabinets 27" x 90" x 24" tall cabinet, 27" x 35" x 24". Contact Daniel Miller with any questions 440-321-5965 2486 New Cabinets 48" x 21" x 35" tall vanity, 12" x 12" x 36" tall corner shelf, 15" x 12" x 45" cabinet extra drawers, trim molding, and shelves. Contact Daniel Miller with any questions 440-321-5965 2487 Harrington Forklift Boom 6' long overall extends to 12', max capacity at 6' is 6000 lbs. 12'=2500 lbs. Contact Daniel Miller with any questions 440-321-5965 2488 Kelly Dock Leveler Model: H630W, SN: D023144, 40,000 lbs capacity, 1 hp 3 ph, 6' wide x 8'9" with 16" drop, 24" high up to 56" high. Used. Contact Daniel with any questions 440-321-5965 2489 4 Metal Cabinets 36" wide x 84" high x 12" deep with shelving. Contact Daniel Miller with any questions 440-321-5965 2490 4 Metal Cabinets 36" wide x 84" high x 12" deep with shelving. Contact Daniel Miller with any questions 440-321-5965 2491 4 Metal Cabinets 36" wide x 84" high x 12" deep with shelving. Contact Daniel Miller with any questions 440-321-5965 2492 Bulk Tank 36 x 84 Copeland. Has a couple of dents on outside, approx 150 gallon, 9'4" overall length x 48" high. Contact Daniel with any questions 440-321-5965 2493 Tire Chains Set of 2 skidder tire chains. Contact Myron Nissley with any questions 574-536-2481 2495 Engine Crane* 2000 lbs lift capacity, manual operation, mounted on casters. Contact Daniel Miller with any questions 440-321-5965 2496 Ammco Lift* Model: B2900F, SN: P960221528, capacity 9000 lbs, lifting current 20 amps, 1 ph-60hz, power unit 31248-3, 230V. Contact Daniel Miller with any questions 440-321-5965 2497 Fuel Transfer Tank* 120 gallon capacity, 24" w x 60" l x 24" h. Contact Daniel Miller with any questions 440-321-5965 2498 Kohler Engine* Kohler Command 25, 25 hp gas engine, electric start, no gas tank, good unit. Contact Daniel Miller with any questions 440-321-5965 2499 Power Washer and Hose Reel* 2000 psi electric washer, no wand, hose reel was used on a fire truck, loaded with high psi hose. Contact Daniel Miller with any questions 440-321-5965 2500 3 File Cabinets* (3) 5 drawer file cabinets, 15" w x 27" d x 64" h. 2501 File Cabinet* 4 drawer file cabinet, 42" w x 19" d x 53" h 2502 3 File Cabinets* (3) 5 drawer file cabinets, 15" w x 27" d x 64" 2503 5 File Cabinets* (5) 2 drawer file cabinets 2504 3 File Cabinets* (2) 4 drawer fire proof, no keys, 17" w x 30" d x 53" h. (1) 4 drawer file cabinet, 18" w x 27" d x 53" h. 2504A 10 Drawer File Cabinet* Hardwood file cabinet. Very nice cabinet. 2505 Delta Tablesaw* SN: 93G94359, powered by a air motor, 10" blade capacity, electric motor is included. Contact Daniel Miller with any questions 440-321-5965 2506 Powermatic 12" Planer* Model: 100, no motor. Contact Daniel Miller with any questions 440-321-5965 2507 Grizzly Jointer* Hydraulic drive. Contact Daniel Miller with any questions 440-321-5965 2508 Grizzly Belt/Disc Sander* 6" x 9" belt and disc sander, model: SD-69, air powered. Contact Daniel Miller with any questions 440-321-5965 2509 Compact Floor Bender* Good condition. Contact Daniel Miller with any questions 440-321-5965 2510 DeWalt Sliding Compound Miter Saw* SN: 11189, working condition. Contact Daniel Miller with any questions 440-321-5965 2511 Stihl Chainsaw, Air Skilsaws, and Misc.* Stihl 026 needs tune up, 2 air powered Skilsaws, Senco stapler, die grinder, multi charging bus bar. Contact Daniel Miller with any questions 440-321-5965 2512 Electric Uupright Manlift Model: 68003-001, SN: 15358, max platform height 40', 12V, 300 lbs lift capacity, on board charger. Actual condition of unit is unknown. Contact Daniel Miller with any questions 440-321-5965 2513 Lot of Misc.* 2 log chains, (2) 3 ton jack stands. Contact Daniel Miller with any questions 440-321-5965 2514 Lot of Misc* 2 sets of harness and tugs, 1 bipolastic, 1 leather, and surrey pole. Contact Daniel Miller with any questions 440-321-5965 2515 Table Saw* Sears and Roebuck, model: 10323420. Contact Daniel Miller with any questions 440-321-5965 2516 Remmey Pallet Hydraulic Pak* Mfg date 6/22/2000. Tank capacity 30 gallon, mas psi 1200, with oil cooler, powered by a 15hp electric 3 phase 230/460V motor. 2517 Hydrualic Pak* Powered by a 10hp 3ph electric motor, with a continental pump, 4000 psi 2518 Hydrualic Tank and Motor* 7.5hp 3 phase, 230/460V 2519 Vynil Pickett Fence* 48' tall, some are 6' and 8' long and there are 9 sections including a gate section. Contact Daniel Miller with any questions 440-321-5965 2550 Walnut 4/4 Boards 5 /12" wide, lift measurements 45" wide x 7' long x 35" high. Contact Daniel with any questions 440-321-5965 2551 Walnut 4/4 Boards 5 1/2" wide x 6' long. Lift measurements 48" wide x 6' long x 19" high. Contact Daniel with any questions 440-321-5965 2552 Walnut 4/4 Boards 6" and 4" wide, 6' to 8' long. Lift measures 53" wide x 34" high. Contact Daniel with any questions 440-321-5965 2553 Walnut 4/4 Boards 5"-5 1/2" wide, 7'-6' long. Lift measures 48" wide x 31" high. Contact Daniel with any questions 440-321-5965 2554 Walnut 4/4 Boards 5 1/2" wide, 6' and 8' long. Lift measures 48" wide x 31" high. Contact Daniel with any questions 440-321-5965 2555 Walnut 4/4 Boards 5 3/4" wide, 6' and 7' long. Lift measures 50" wide x 37" high. Contact Daniel with any questions 440-321-5965 2556 Walnut 4/4 Boards 5 1/2" wide, 6'-7' and 8' long. Lift measures 47" wide x 35" high. Contact Daniel with any questions 440-321-5965 2557 Grade Outs Mixed Hardwoods 4/4 random width, lift measures 46" w x 38" h approx. 10' long. Contact Daniel Miller with any questions 440-321-5965 2558 Grade Outs Mixed Hardwoods 4/4 random width, lift measures 48" w x 40" h approx. 10' long. Contact Daniel Miller with any questions 440-321-5965 2559 Kiln Dried Grade Outs 4/4 random width and various lengths. Mostly red oak. Contact Daniel with any questions 440-321-5965 2560 Kiln Dried Grade Outs 4/4 random width and various lengths. Mostly red oak. Contact Daniel with any questions 440-321-5965 2561 Kiln Dried Grade Outs 4/4 random width and various lengths. Mostly red oak. Contact Daniel with any questions 440-321-5965 2562 Kiln Dried Grade Outs 4/4 random width and various lengths. Mostly red oak. Contact Daniel with any questions 440-321-5965 2563 Kiln Dried Grade Outs 4/4 random width and various lengths. Mixed species Contact Daniel with any questions 440-321-5965 2564 Kiln Dried Grade Outs 4/4 random width and various lengths. Mixed species Contact Daniel with any questions 440-321-5965

Close X

Gallery Images Loading, Please Wait...

Close X

Save this sale to your Saved Sales list!

Your Saved Sales list is an easy way to return to sale listings which are of interest to you.

Login

Username:

Password:

Sign Up

FREE EMAIL NOTIFICATIONS
auction listings delivered to your inbox

Close X

Sign Up

FREE EMAIL NOTIFICATIONS
auction listings delivered to your inbox

Login

Username:

Password:

Return

Lake Erie Equipment Auction Ring 2

Live Auction

View Gallery (408)

Auction Date(s)

Friday Nov 24, 2023 Completed

Auction Location

Middlefield, OH 44062

View Map

Company

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Website: brightstarauctions.com

Listing Terms and Conditions

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.

1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
2. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
3. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
4. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
5. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Cash payments totaling Ten Thousand Dollars ($10,000) or more will not be accepted. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.

Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyer’s account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Insurance. Any work performed by Purchaser(s) or Purchaser Representative (including sub-contractors) shall be insured and provide proof of coverage against all claims for injuries against persons or damages to property which may arise from or in connection with the removal of items or equipment. Insurance coverage requirements are as follows: General Liability $1,000,000/$2,000,000 and Worker’s Compensation $1,000,000 or as required by State Law. Seller shall be listed as additionally insured, if required.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.

Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

00A

Information Lot
For onsite crowd only! Will be sold indoors. Selling Dewalt, Milwaukee, Makita cordless tools, and new knives. Also approx. 103 lots of toys.

Heavy Equipment Key Set 36 Keys
Shipping available for $20

Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

2000

New 40' High Cube Multi-Door Container
40', high cube, multi-door, shipping container, 4 side doors, end doors, 9'6'' high, 8' wide

2001

2023 New One-Trip 20' Standard Container
SN: ZXJU0049496

2002

2023 New One-Trip 20' Standard Container
SN: RXCU1026845

2002A

2023 New One-Trip 20' Standard Container*
TGSU 226867 3

2002B

2023 New One-Trip 20' Standard Container*
TGSU 226781 0

2003

New 1 Cubic Yard Stackable Self Dumping Hopper with Fork Pockets
Contact Bronson with any questions 574-210-3721

2004

New 2 Cubic Yard Self Dumping Hopper with Fork Pockets
Contact Bronson with any questions 574-210-3721

2005

New 2 Cubic Yard Self Dumping Hopper with Fork Pockets
Contact Bronson with any questions 574-210-3721

2006

New 2 Cubic Yard Self Dumping Hopper with Fork Pockets
Contact Bronson with any questions 574-210-3721

2007

New 3/8" AR500 Gong Shooting Target
Contact Bronson with any questions 574-210-3721

2008

New 3/8" AR500 Gong Shooting Target
Contact Bronson with any questions 574-210-3721

2009

New 2 Cubic Skid Steer Hopper with Fork Pockets
Contact Bronson with any questions 574-210-3721

2010

New Welding Table with Shelf
30" x 57". Contact Bronson with any questions 574-210-3721

2011

New Welding Table with Shelf
30" x 57". Contact Bronson with any questions 574-210-3721

2012

New Welding Table with Shelf
30" x 57". Contact Bronson with any questions 574-210-3721

2013

New Welding Table with Shelf
30" x 57". Contact Bronson with any questions 574-210-3721

2014

New Welding Table with Shelf
30" x 57". Contact Bronson with any questions 574-210-3721

2015

New Welding Table with Shelf
30" x 57". Contact Bronson with any questions 574-210-3721

2016

New KC Work Bench
28" x 60". Contact Bronson with any questions 574-210-3721

2017

New KC Work Bench
28" x 60". Contact Bronson with any questions 574-210-3721

2018

New KC Work Bench
28" x 60". Contact Bronson with any questions 574-210-3721

2019

New 4 Cubic Yard Debris Box
Contact Bronson with any questions 574-210-3721

2020

New 4 Cubic Yard Debris Box
Contact Bronson with any questions 574-210-3721

2021

50 New Safety Cones
Contact Daniel Miller with any questions 440-321-5965

2080A

Southern Yellow Pine Fence Posts
6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2080B

Southern Yellow Pine Fence Posts
6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2080C

Southern Yellow Pine Fence Posts
6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2080D

Southern Yellow Pine Fence Posts
6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2080E

Southern Yellow Pine Fence Posts
6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2080F

Southern Yellow Pine Fence Posts
6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2080G

Southern Yellow Pine Fence Posts
6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2080H

Southern Yellow Pine Fence Posts
6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2080I

Southern Yellow Pine Fence Posts
6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2080J

Southern Yellow Pine Fence Posts
6"-7" x 8', 24 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2081

Southern Yellow Pine Fence Posts
3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2081A

Southern Yellow Pine Fence Posts
3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2081B

Southern Yellow Pine Fence Posts
3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2081C

Southern Yellow Pine Fence Posts
3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2081D

Southern Yellow Pine Fence Posts
3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2081E

Southern Yellow Pine Fence Posts
3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2081F

Southern Yellow Pine Fence Posts
3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2081G

Southern Yellow Pine Fence Posts
3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2081H

Southern Yellow Pine Fence Posts
3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2081I

Southern Yellow Pine Fence Posts
3"-4" x 8', 55 posts per bundle. Pressure treated with CCA. Contact Lester with any questions 812-787-3862

2082A

New Gates
16' x 50" 6 bar, 1 3/4" tubing with hangers. Contact Daniel Miller with any questions 440-321-5965

2082B

New Gates
16' x 50" 6 bar, 1 3/4" tubing with hangers. Contact Daniel Miller with any questions 440-321-5965

2082C

New Gates
14' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965

2082D

New Gates
14' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965

2082E

New Gates
12' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965

2082F

New Gates
12' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965

2082G

New Gates
10' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965

2082H

New Gates
10' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965

2082I

New Gates
8' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965

2082J

New Gates
8' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965

2082K

New Gates
6' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965

2082L

New Gates
6' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965

2082M

New Gates
4' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965

2082N

New Gates
4' x 50" 6 bar, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965

2083

Larch Fence Posts
(35) 5 1/2" x 5 1/2" x 8'. Contact Daniel Miller with any questions 440-321-5965

2083A

Larch Fence Posts
(35) 5 1/2" x 5 1/2" x 8'. Contact Daniel Miller with any questions 440-321-5965

2083B

Locust Boards
(Approx 200) 1" x 4" x 7' long. Contact Daniel Miller with any questions 440-321-5965

2083C

Locust Boards
1" x Random Width x 7" Lift measures 44" w 7' L 24" H. Contact Daniel Miller with any questions 440-321-5965

2083D

Larch Boards
(Approx 98) 1 3/4"-2 1/4" thick, 6" wide x 8' long. Contact Daniel Miller with any questions 440-321-5965

2085

New Chain Rack
10 spool chain, 1 spool cable, 2 spool rope on rack. Contact Daniel Miller with any question 440-321-5965

2086

Wire Rack
11 spools assorted wire on cart. 10, 12, 18 gauge. Contact Daniel Miller with any question 440-321-5965

2087

New 48" Handyman Jack
Model: 485, 4660 lbs lift capacity. Contact Daniel Miller with any question 440-321-5965

2087A

New 48" Hilift Jack
Model: 485, 4660 lbs lift capacity. Contact Daniel Miller with any question 440-321-5965

2087B

New Aluminum Shovels
6 shovels, 36" handle, mfg 2nds, 125 thick material. Contact Daniel Miller with any question 440-321-5965

2087C

New Aluminum Shovels
6 shovels, 30" handle, mfg 2nds, 125 thick material. Contact Daniel Miller with any question 440-321-5965

2087D

New 2 Logrite Cant Hooks
42" Peavey and 36" cant hook. Contact Daniel Miller with any question 440-321-5965

2088

2089

New Chicken Coop
6' x 8' with 4 nests, metal siding and roof, 1 window, 1 man door, and 1 run out door. Contact Daniel Miller with any questions 440-321-5965

2089A

New Chicken Coop
54" wide x 80" long x 50" high overall. Has a 32" wide x 50" long x 32" high house with 4 nests and metal roof. Contact Daniel Miller with any questions 440-321-5965

2090

New Corral Pen
8' x 8' sheep/calf corral with 4' gate, galvanized coating. Contact Daniel with any questions 440-321-5965

2090A

New 12' Gate with Mesh
1 3/4" tubing with hangers and chain. Contact Daniel Miller with any questions 440-321-5965

2090B

New Heavy Duty Galvanized Gate
10' 6 bar gate, 2" tubing. Contact Daniel Miller with any questions 440-321-5965

2090C

New 10' Gate with Mesh
Galvanized. Contact Daniel Miller with any questions 440-321-5965

2090D

New Galvanized Gate
8' 7 bar gate, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965

2090E

New Galvanized Gate
8' 7 bar gate, 1 3/4" tubing. Contact Daniel Miller with any questions 440-321-5965

2090F

New 12' Gate with Mesh
1 3/4" tubing with hangers and chain. Contact Daniel Miller with any questions 440-321-5965

2091

2091A

2091B

2091C

2091D

2092

New Booster Regulator
Model: VBA11A-T02-Z, 54 pieces, input 15-145 psi, output 290 psi. Contact Daniel Miller with any questions 440-321-5965

2092A

New ATV Dump Trailer*
With a 36" w x 48" l x 12" d, bed 2" ball hitch. Contact Daniel Miller with any questions 440-321-5965

2092B

New ATV Dump Trailer*
With a 44" w x 55" l x 22" d, bed 2" ball hitch. Contact Daniel Miller with any questions 440-321-5965

2092C

New ATV Dump Trailer*
With hydraulic tilt and double axle with a 2" ball hitch that is broken, 50" w x 60" l x 22" d. Contact Daniel Miller with any questions 440-321-5965

2092D

New Yellow Locust Post*
(Approx. 88) 3 3/4" x 3 3/4" x 8'6"

2092E

New Yellow Locust Post*
(Approx. 88) 3 3/4" x 3 3/4" x 8'6"

2092F

New Yellow Locust Post*
(Approx. 88) 3 3/4" x 3 3/4" x 8'6"

2092G

New Yellow Locust Post*
(Approx. 88) 3 3/4" x 3 3/4" x 8'6"

2092H

New Yellow Locust Post*
(17) 6" x 6" x 8'6" long

2092I

New Yellow Locust Post*
(17) 6" x 6" x 8'6" long

2093

New 1 Yard Dumping Hopper
Low profile 28" fork pocket, 64" w x 48" deep x 24" tall. USA made. Contact Daniel Miller with any questions 440-321-5965

2094

New 1 Yard Dumping Hopper
40" x 64" x 40", 29" fork pockets. USA made. Contact Daniel Miller with any questions 440-321-5965

2095

New 2 Yard Dumping Hopper
58" x 62" x 46", 30" fork pockets. USA made. Contact Daniel Miller with any questions 440-321-5965

2096

New 2 1/2 Yard Dumping Hopper
70" x 62" x 46", 30" fork pockets. USA made. Contact Daniel Miller with any questions 440-321-5965

2096A

New Oak Swamp Mat
45" wide x 16' long x 7" thick. Contact Daniel Miller with any question 440-321-5965

2096B

New Oak Swamp Mat
45" wide x 16' long x 7" thick. Contact Daniel Miller with any question 440-321-5965

2097

New Logging Mat
(2) 10' x 7' x 7" thick. Contact Daniel Miller with any questions 440-321-5965

2098

New Logging Mat
(2) 10' x 7' x 7" thick. Contact Daniel Miller with any questions 440-321-5965

2099

New Logging Mat
(2) 10' x 7' x 7" thick. Contact Daniel Miller with any questions 440-321-5965

2100

1996 Arctic Cat 580 Snowmobile
Meter reads: 8067 miles, 888 hours, Suzuki gas engine, fast track long travel system, condition unknown. Contact Daniel with any questions 440-321-5965

2100A

2001 Arctic Cat 600 Snowmobile
Meter reads: 2347 miles, 96 hours, fast track long travel system, condition unknown. Contact Daniel with any questions 440-321-5965

2100B

2002 Polaris Indy 500 EFI Snowmobile
Model: 0930674, SN: 2052347, Meter reads: 3654 miles, 0 hours, condition unknown. Contact Daniel with any questions 440-321-5965

2102

Stihl MS290 Chain Saw
18" bar, never used much, comes with aluminum case and some misc. Runs good. Contact Daniel Miller with any questions 440-321-5965

2103

Walk Behind Classen Aerator
19", powered by a Honda engine. Good working condition.

2104

Lesco Overseeder
Powered by a Honda engine. In good working condition

2105

Classen Walk Behind Aerator
19", powered by a Honda engine. In good working condition.

2106

Bear Cat Crary Chipper Shredder
Powered by a 7 hp G300 Honda

2107

Husqvarna 455 Rancher Chain Saw
With 20" bar. Excellent condition. Contact Daniel Miller with any question 440-321-5965

2108

Echo CS 760 Chain Saw
With 28" bar. Good running condition. Contact Daniel Miller with any question 440-321-5965

2109

Hilti DSH 900-X Concrete Saw
16" new blade. Contact Daniel Miller with any question 440-321-5965

2110

Honda HS724 Snow Blower
5" wide tracks, 24" wide, hand start. Ran last year. Contact Daniel Miller with any question 440-321-5965

2111

Craftsman Snow Blower
24", electric or hand start, 5 speed, left tire needs air, 5.5 hp Tecumseh. Ran last year.

2112

Roof 26" Brush Mower
Model: 74300, SN: 103579, 2 blade, 7 hp B-S motor. Works good. Contact Daniel with any questions 440-321-5965

2113

Cub Cadet Hydro 1811 Riding Mower
SN: 2050601U753828, with 50" mower deck, meter reads: 2481 hours, Kohler 18 gas motor, mfg date D036E. Contact Daniel with any questions 440-321-5965

2114

New 60" Mower Deck Frame
Contact Daniel Miller with any questions 440-321-5965

2115

Ariens Lawn Tractor*
Powered by 17.5 hp Briggs and Stratton engine, 42" deck. Runs and drives. Contact Daniel Miller with any questions 440-321-5965

2116

Craftsman Lawn Tractor*
No engine, 54" mower deck with no blades, power washer no carburetor. Contact Daniel Miller with any questions 440-321-5965

2117

Huskee Lawn Tractor*
LT 4200 7 speed 17.5 hp gas engine, no mower deck. Contact Daniel Miller with any questions 440-321-5965

2150

Gap Vax SV-11 Vacuum Pump
SN: SV11-0076, has 50 hp electric motor. In like new condition. Contact Daniel Miller with any questions 440-321-5965

2190

Rims
4 metal rims and 5 aluminum, assorted sizes, some are new. All in a 44 x 54 metal crate. Contact Daniel Miller with any questions 440-321-5965

2191

Tires
6 used tires, assorted sizes. 11R22.5, 7.50-16LT, LT235/85 R16, 300-15, LT 235/85 R16, 11R22.5. Contact Daniel Miller with any questions 440-321-5965

2192

Tires
6 tires, 2 with aluminum rims. LT235/85 R16, P255/65R16, LT235/85 R16, ST 205/75 D14, 215/65 R16, 8-14.5. Contact Daniel Miller with any questions 440-321-5965

2193

Tires
4 total, 2 Dynamic 225/70R19.5 with rim, 1 Gladiator 225/70R19.5 only tire, 1 Double Coin 10R17.5 RT500 with rim. Contact Daniel Miller with any questions 440-321-5965

2194

Tires
4 Firestone LT245/75 R17, 2 with rims and 2 only tires. Contact Daniel Miller with any questions 440-321-5965

2195

Tires
4 BF Good Rich All-Terrain LT245/70R17, tires only. Contact Daniel Miller with any questions 440-321-5965

2196

Tires
6 total, 2 Firestone LT245/75R17 metal rim, 4 Mastercraft LT265/75R16 metal rim. Contact Daniel Miller with any questions 440-321-5965

2197

Tires
2 Good Year 445/50R 22.5, tire only. Contact Daniel Miller with any questions 440-321-5965

2198

Tires
4 Michelin LT 275/65R20 with aluminum rims. Contact Daniel Miller with any questions 440-321-5965

2199

Tires
6 used 285/75R 24.5 with aluminum rim. Contact Daniel Miller with any questions 440-321-5965

2200

Truck Tires
General Grabbers size: 275/60 R20

2201

3 Truck Tires and Rims
1 tire and rim at 13.6-28, 2 tires and rims at 16.9-24

2202

Skid Loader Rims and Tires
Set of 4, solid rubber 10-16.5 NHS with 8 lug rims.

2203

Skid Loader Rims and Tires
Set of 4, 3 with tires, 8 lug rims, 12-16.5 NHS

2204

Used Rubber Track
1-12" W Solid Deal 07-353-3-5410 for a mini excavator.

2205

4 Tires
3 backhoe tires 19.5L-24, 1 tractor tire 16.9-24

2299

Air Tank
Refurbished 1000 gallon air tank, 4' wide x 17' long x 46" high. In good condition. Contact Daniel Miller with any questions 440-321-5965

2300

Herkules Air Lift Table
39" x 50", 6000 lbs capacity, 5" lowered, raised up to 24". In working condition. Contact Daniel Miller with any questions 440-321-5965

2301

Herkules Air Lift Table
39" x 50", 6000 lbs capacity, 5" lowered, raised up to 24". In working condition. Contact Daniel Miller with any questions 440-321-5965

2302

Vibrating Conveyor
Model: 412861, SN: 90-61188, Like new stainless steel, 24" w x 8' l x 36" h, 42" overall width, 1 hp 3 ph. Contact Daniel Miller with any questions 440-321-5965

2303

Vibrating Conveyor
Model: 429821, SN: 01-65313, Key like new stainless steel 26" w x 12' l x 39" h, 48" overall width. Contact Daniel Miller with any questions 440-321-5965

2304

Welding Table
28" x 51" x 37" with T slot, nice heavy duty. Contact Daniel Miller with any questions 440-321-5965

2305

Lincoln Ideal Arc 250 Welder
Model: AC-250, SN 586602, 1 ph, 230/460V, condition unknown. Contact Daniel Miller with any questions 440-321-5965

2306

Line Shaft
3 sections totaling 48' of 1 1/4" line shaft mount on 4"x6" channel. Contact Daniel Miller with any questions 440-321-5965

2307

Fuel Tank
38" x 60" fuel tank on stand, 76" high stand, in good condition. Contact Daniel Miller with any questions 440-321-5965

2307A

Pipe Fittings
(5) 6" x 8" magnets, 1 box of brass, S.S., steel air/pipe fittings. Contact Daniel Miller with any questions 440-321-5965

2308

Machinist Parts
Assorted rails and liner way glides, 3 boxes assorted reamers, SPI OBI Cam clamp assy. Contact Daniel Miller with any questions 440-321-5965

2309

Machinist Parts
Assorted calipers, indicators, air tools, brass fittings, cutoff blades, misc. Contact Daniel Miller with any questions 440-321-5965

2310

Machinist Parts
Electric motor, hold downs, sheet cutting torch, foot controls, repeat o-meter, misc. Contact Daniel Miller with any questions 440-321-5965

2311

Machinist Parts
225" x 50" aluminum cart, air suction cup, Emerson control unit, model SP312 drilling/tapping head. Contact Daniel Miller with any questions 440-321-5965

2312

Machinist Parts
Like new L type boring tool holder, AC/DC inverter, power supply electric tools, air sander, 7" sanding flap disc. Contact Daniel Miller with any questions 440-321-5965

2313

Machinist Parts
Assorted handles, gears, cutlers, vice, reamers, rigid pipe threader. Contact Daniel Miller with any questions 440-321-5965

2314

Machinist Parts
26" fan blade, drill bits, flat pulleys, tapping unit, 3 jaw chuck, hydraulic motor. Contact Daniel Miller with any questions 440-321-5965

2315

Machinist Parts
Plastic Sch.80 pipe fittings, door locks, hand miter saws. Contact Daniel Miller with any questions 440-321-5965

2316

Machinist Parts
Assorted of aluminum handles, machinist cutters, gauges, welding torches and gauges. Contact Daniel Miller with any questions 440-321-5965

2317

Machinist Parts
Toggle clamp, bearings, glides, pins, cutting fluid, misc. Contact Daniel Miller with any questions 440-321-5965

2318

Machinist Parts
15" Skinner 3 jaw chuck, high pressure hoses, key cutters, Toleda scale. Contact Daniel Miller with any questions 440-321-5965

2319

Machinist Parts
Saw blades, knobs, buffers, drawer slides, misc. Contact Daniel Miller with any questions 440-321-5965

2320

Machinist Parts
Pipe vice, steady rest, hydraulic generator, tee post pounders. Contact Daniel Miller with any questions 440-321-5965

2321

Lincoln Welder
300 amp, 220V, 3 ph, on wheels, condition unknown. Contact Daniel Miller with any questions 440-321-5965

2322

Doringer 350 Chop Saw
1.6 hp, 3 ph, 220V, motor has some damage, 13" blade, 3 extra blades, condition unknown. Contact Daniel Miller with any questions 440-321-5965

2323

Buffalo 18 Drill Press
33" x 35" stand, 3 ph electric drive, condition unknown. Contact Daniel Miller with any questions 440-321-5965

2324

Abrsaive #3 Surface Grinder
7" grinder, 56" long bed, electric motor with flat belt drive, old cast iron base, condition unknown. Contact Daniel Miller with any questions 440-321-5965

2325

Southworth Lift Table
4' x 4' x 38" high with rotating top, electric drive, 460V, 3 ph, condition unknown. Contact Daniel Miller with any questions 440-321-5965

2326

Fot Burt-Hammond Raidal Arm Drill Press
Model: 643, SN: 1804, variable speed, 35" x 72" x 86" tall, nice older unit, condition unknown. Contact Daniel Miller with any questions 440-321-5965

2327

2328

Lincoln SAE-300 DC Welder
Code: 6963, SN: A-753498 diesel powered 4 cylinder, condition unknown. Contact Daniel Miller with any questions 440-321-5965

2329

Torit Donaldson AT-3000 Filter System
2 unit, SN: IC748263, 3 hp, 3 ph, 208/460V. Contact Daniel Miller with any questions 440-321-5965

2330

Torit Donaldson AT-3000 Filter System
2 unit. Contact Daniel Miller with any questions 440-321-5965

2331

Safety Kleen Parts Washer
54" L x 41 1/2" W x 77" H, 1 roll 5/8" cable, condition unknown. Contact Daniel Miller with any questions 440-321-5965

2332

Storage Rack
12 tank capacity propane storage rack, 46" L x 41" W x 72" H. Contact Daniel Miller with any questions 440-321-5965

2333

Super Cage Crane Safety Cage
Model: S-36, SN: C22032, Weights: 390 lbs. 3 person capacity, 36" L x 36" W x 94" H. Contact Daniel Miller with any questions 440-321-5965

2334

2010 Knight Global Lift Table
4000 lbs capacity, air operated lifts, 40" tall, 52" x 64" swiveling top, 13" tall when lowered. Contact Daniel Miller with any questions 440-321-5965

2335

Gray PL-1000 Lift Table
42" x 60" platform, air operated, condition unknown. Contact Daniel Miller with any questions 440-321-5965

2336

Garden Tractor Lift Table
42" x 60" platform, air operated, 1000 lbs capacity. Contact Daniel Miller with any questions 440-321-5965

2337

Cherry Picker with 8 Ton Hydraulic Jack
Contact Daniel Miller with any questions 440-321-5965

2338

Welding Carts
1 steel wheel and 2 rubber wheel tank carts. Contact Daniel Miller with any questions 440-321-5965

2339

Welding Cart
2 Solid Rubber tank carts. Contact Daniel Miller with any questions 440-321-5965

2340

Parts Bins
(21) 10" x 20" x 8" parts bins. Contact Daniel Miller with any questions 440-321-5965

2341

Parts Bins
(Approx 40) 10" x 20" x 8" parts bins. Contact Daniel Miller with any questions 440-321-5965

2342

Parts Bins
(28) 10" x 20" x 8" parts bins. Contact Daniel Miller with any questions 440-321-5965

2343

Parts Bins
(20) 20" x 12" x 10" parts bins. Contact Daniel Miller with any questions 440-321-5965

2344

Parts Bins
(20) 20" x 12" x 10" parts bins. Contact Daniel Miller with any questions 440-321-5965

2345

Parts Bins
(00) 20" x 12" x 10" parts bins. Contact Daniel Miller with any questions 440-321-5965

2346

Air and Water Hose
With Husky air operated water pump, condition unknown. Contact Daniel Miller with any questions 440-321-5965

2347

Wegoma Blower and Cyclone
8" inlet, 5 1/2" x 8" outlet, 16" diameter, line shaft setup, cyclone 6" outlet, 65" long. Contact Daniel Miller with any questions 440-321-5965

2348

Hidden View Water Pumps
2 pumps, in good condition. Contact Daniel Miller with any questions 440-321-5965

2349

Band Saw Blades
Approx 30 pieces 20'7" x 1 1/2" super sharp and monk for brand. About 15 pieces have been resharpened. Were used on band saw. Contact Daniel Miller with any questions 440-321-5965

2350

40 Ton Scotchman Iron Worker
Model: 4014T, 3 hp, 1 ph, 220 Volt. Contact Daniel Miller with any questions 440-321-5965

2351

Wilton Metal Cutting Band Saw
3/4 hp single phase. Contact Daniel Miller with any questions 440-321-5965

2352

12 Ton Bantam Brake 60" Cut
With different dies Max air pressure, 110 psi. Contact Daniel Miller with any questions 440-321-5965

2353

Compact Bender
Model: S31980, used, with 8 round dies. In good condition. Contact Daniel Miller with any questions 440-321-5965

2354

52" Tenn Smith Sheet Metal Shear
Manual or air operated, 16 gallon. Contact Daniel Miller with any questions 440-321-5965

2355

8' Chicago Hand Brake
Contact Daniel Miller with any questions 440-321-5965

2356

Tennsmith Hand Finger Brake
4', 16 Ga. Contact Daniel Miller with any questions 440-321-5965

2357

30" Niagra Bar Folder
Mounted on a 4' x 10' x 32" table. Contact Daniel Miller with any questions 440-321-5965

2358

Pex Stow Notcher
16 Ga. air powered. Contact Daniel Miller with any questions 440-321-5965

2359

Hand Tools
3 Niagara, Pexto beader, cutter. Contact Daniel Miller with any questions 440-321-5965

2359A

Crimper
3 Niagara crimper, cutter, beader with extra dies. Contact Daniel Miller with any questions 440-321-5965

2359B

Crimper
Model: 10019 Niagara pipe crimper. Contact Daniel Miller with any questions 440-321-5965

2359C

Edger
Lock former easy edger. Contact Daniel Miller with any questions 440-321-5965

2359D

Crimper
Niagara cutter, crimper, beader. All in 1 tool. Contact Daniel Miller with any questions 440-321-5965

2359E

Shear
Marshall Town 18 throatless shear. Contact Daniel Miller with any questions 440-321-5965

2359F

Shear
Hand shear and older crimper, beader, cutter parts and dies. Contact Daniel Miller with any questions 440-321-5965

2360

2360A

Generator
UST 3200/4200 W, 120V, 1 ph gas 196 cc, on wheel cart with cover. Looks like new. Contact Daniel Miller with any questions 440-321-5965

2360B

New Chicago Generator
10KW belt driven generator, Model: 45416. Contact Daniel Miller with any questions 440-321-5965

2361

Ace Spot Welder
Single phase, 13 Ga. Contact Daniel Miller with any questions 440-321-5965

2361A

Welder
Set of cutting torches on cart with Airco 9516 torch and gauges. Nice unit. Contact Daniel Miller with any questions 440-321-5965

2361B

Welding Supplies
5 rolls of new welding wire. Over 100 pieces of new welding tips, nozzles, shields. Drive roller kit. Contact Daniel Miller with any questions 440-321-5965

2361C

2361D

Lincoln Electric Wire-Matic 255 Welder
Code # 10166, SN: U1950418296, wire feed welder with tank complete outfit. Good working unit. Contact Daniel Miller with any questions 440-321-5965

2361E

Lincoln Ideal Arc 250 Welder
Code # 7279-0, SN: 340329, complete 1 phase. Good working unit. Contact Daniel Miller with any questions 440-321-5965

2361F

Miller 180amp Welder
SN: HD668292, with 12 hp Kohler gas motor, complete with cable leads on cart. Good working unit. Contact Daniel Miller with any questions 440-321-5965

2362

Columbian 6" Heavy Duty Vise
Swivel. In good condition. Contact Daniel Miller with any questions 440-321-5965

2362A

Multi Purpose Swivel Vise
5". In good condition. Contact Daniel Miller with any questions 440-321-5965

2362B

Vises
4 used drill press vises. In good condition. Contact Daniel Miller with any questions 440-321-5965

2362C

Stencil Machine
3/4" cap. Contact Daniel Miller with any questions 440-321-5965

2363

Welding Table with Tin Smithing Vice and Dies
48" x 62" x 31" table, 11 dies, 3/4" thick top. In good condition. Contact Daniel Miller with any questions 440-321-5965

2363A

Forming Tools
7 forming tools with 8 1/2" x 8 1/2" holder. Contact Daniel Miller with any questions 440-321-5965

2364

Wesco Pallet Jack
27" x 42". Contact Daniel Miller with any questions 440-321-5965

2366

2367

20 Ga. Flagler
Like new, electric. Contact Daniel Miller with any questions 440-321-5965

2368

22 Ga. Lock Former
Contact Daniel Miller with any questions 440-321-5965

2369

Hemdley Hole Puncher
#6 manual hole punch with box of extra dies. Contact Daniel Miller with any questions 440-321-5965

2370

Slip Roller
Has broken handle. Contact Daniel Miller with any questions 440-321-5965

2371

Corner Punch
Manual or air, 39 The Little Blacksmith 5" cap. Contact Daniel Miller with any questions 440-321-5965

2372

New Homemade Wood Stove
12" x 18" x 24" long. Contact Daniel Miller with any questions 440-321-5965

2373

Niagra #196 8' Sheet Metal Shear
Estimating 20 Ga. excellent condition. Contact Daniel Miller with any questions 440-321-5965

2374

Rockford 25 Ton #3R Punch Press
Contact Daniel Miller with any questions 440-321-5965

2374A

Parts Cabinet
Loaded with punches and tools. Will fit lot 2374 and other machines. Contact Daniel Miller with any questions 440-321-5965

2375

Peckstow #2 Circle Cutter and Roller
30" Niagara roller 19284. Contact Daniel Miller with any questions 440-321-5965

2375A

Thompson Sewing Machine
Model: PW-301, mini walking foot, electric drive. Contact Daniel Miller with any questions 440-321-5965

2376

2 Metal Cutting 14" Chop Saws
Porter cable model: 1400, Porter cable model 1410. Contact Daniel Miller with any questions 440-321-5965

2377

Maytag Wringer Washer
Contact Daniel Miller with any questions 440-321-5965

2377A

2377B

2377C

Maytag Wringer Washer
In like new or Mint condition. Original paint. Serviced with new seals by Miller's Maytag. Contact Daniel with any questions 440-321-5965

2378

Riteway Wood Stove
Model: 37. Contact Daniel Miller with any questions 440-321-5965

2379

Metal Sheets
Approx. 20 sheets, 4' x 10' 23 gauge sheet metal. Contact Daniel Miller with any questions 440-321-5965

2380

Assorted Sheet Metal
(5) 4' x 10' and (1) 4' x 7'6" white, (1) 4' x 10' 24 gauge bronze, (1) 4' x 8' 24 gauge brown and 2 smaller pieces. Contact Daniel Miller with any questions 440-321-5965

2381

New Sheet Metal
Assorted sizes of new sheet metal and (2) 36" x 72" aluminum vents. Contact Daniel Miller with any questions 440-321-5965

2381A

Skid of Patterns
Of all sorts including Cubaleos, approx 250 pieces total. Contact Daniel Miller with any questions 440-321-5965

2382

Pipe Threader
Electric pipe threader with adjustable die and misc. Contact Daniel Miller with any question 440-321-5965

2382A

Pipe Threader Set
Toledo pipe threading set, 3/8" up to 2" and electric Central Machinery threader. Contact Daniel Miller with any question 440-321-5965

2382B

Pipe Wrenches
11 pipe wrenches, 6" to 24" Ridgid, Pittsburgh aluminum, and USA Contact Daniel Miller with any question 440-321-5965

2384

2001 Wood Lathe
14" x 40" Central Machinery Lathe, 1 PH, Electric drive. Contact Daniel Miller with any questions 440-321-5965

2385

Press Rite Punch Press
Contact Daniel Miller with any questions 440-321-5965

2385A

Garage Door with Opener
12' x 20' garage door. Contact Daniel with any questions 440-321-5965

2385B

Stack of Blower Pipes
Approx. 20 total, 28", 22", 10" blower pipe and adapters up to 12' long. Assorted used pipes in good condition. Contact Daniel with any questions 440-321-5965

2385C

Blower Pipes
2 skids of 12", 10", 8", 6", 5" pipe, elbows, y's, tees, blast gates. Contact Daniel Miller with any questions 440-321-5965

2386

Rock-Drill and Chipping Hammer
Pneumatic. Good working condition.

2386A

Drill Press
Guardian Power 5/8" cap, 3/4 hp 1ph, 12 speed. In good condition. Contact Daniel Miller with any questions 440-321-5965

2387

Central Machinery Drill Press
16 speed, 5/8" cap., 1hp 1ph. In good condition. Contact Daniel Miller with any questions 440-321-5965

2388

Welding Table
39" x 65" x 38" Hamilton steel table, Precision top. Was used in printing shop. Contact Daniel Miller with any questions 440-321-5965

2389

Wrench Set
12 wrench set from 1 1/16 to 3 7/8, mostly Armstrong and Williams. USA made. Contact Daniel Miller with any question 440-321-5965

2390

Pallet of Punch Set and Misc. Dies
Don't know what the dies fit, 2 Whitney hand punches. Contact Daniel Miller with any question 440-321-5965

2391

2 Diamond Back Bikes
Like new condition. Contact Daniel Miller with any questions 440-321-5965

2391A

Quincy 7 Air Compressor
SN: 293800 S, Kohler gas motor. Working condition. Contact Daniel Miller with any questions 440-321-5965

2392

Welding Table with 2" Electric Drive Belt Sander
30" x 48" x 42" on caster. Contact Daniel Miller with any questions 440-321-5965

2392A

Welding Table
30" x 48" x 32" on caster. Contact Daniel Miller with any questions 440-321-5965

2413

Anvils
4 smaller anvils, 1 blue forge, 2 railroad iron anvils, 1 green homemade. Contact Daniel Miller with any questions 440-321-5965

2414

Fisher 147 Anvil
Fair Condition. Contact Daniel Miller with any questions 440-321-5965

2415

Forming Tools
6 forming tinsmithing tools with tool holder, 7 1/2" x 29 1/2" plate. Contact Daniel Miller with any question 440-321-5965

2416

Forming Tools
8 forming tinsmithing tools with tool holder, 7 1/2" x 29 1/2" plate. Contact Daniel Miller with any question 440-321-5965

2417

Niagra Stove Pipe Seamer
Model: 8610. Nice orginal condition. Contact Daniel Miller with any question 440-321-5965

2418

New 40 Pressurized Abrasive Sand Blaster
In box. Contact Daniel Miller with any questions 440-321-5965

2419

2420

RyoBi Saw
Model: TSS102L, 10" cap. Sliding compound. In good condition. Contact Daniel Miller with any questions 440-321-5965

2420A

New Compact Floor Bender
Max stock width 1 15/16", max stock thickness 5/16", max stock diameter 5/8". Contact Daniel Miller with any questions 440-321-5965

2421

Welding Table
Solid steel, 3" top, 30" x 43" x 25". Contact Daniel Miller with any question 440-321-5965

2421A

Welding Table
Heavy duty on casters, 1 caster broke off, 27" x 96" x 31". Contact Daniel Miller with any question 440-321-5965

2422

New Plywood
(11) 3/4" tongue-groove, some edges are damaged. Contact Daniel Miller with any question 440-321-5965

2423

Trusses
10 pieces with 12" overhang on both ends, 4 pieces with 12" over hang on 1 end, 24' trusses, 8/12 pitch. Contact Daniel Miller with any questions 440-321-5965

2423A

New Steps
13 steps, set of poplar steps, 13' l ong x 30" wide x approx. 9' high, 6 3/4" risers. Contact Daniel Miller with any question 440-321-5965

2423B

New Steps
7 steps, set of oak/pine steps, 92" long x 43 1/2" wide x approx. 6' high, 7" risers. Contact Daniel Miller with any question 440-321-5965

2423C

New Steps
3 steps, set of poplar/plywood steps, 47" long x 40" wide x 32" tall. Contact Daniel Miller with any question 440-321-5965

2424

New Hardie Shingles H25 Straight
Approx. 120 pieces .25" x 15.25" x 48", 7" EXP Monterey taupe color. Contact Daniel Miller with any questions 440-321-5965

2425

Hardie Trim 5/4 Smooth H25
Approx. 60 pieces 1" x 3.5" x 12', Robo gray color. Contact Daniel Miller with any questions 440-321-5965

2426

Hardie Trim 5/4 Smooth H25
Approx. 40 pieces 1" x 5.5" x 12', Robo gray color. Contact Daniel Miller with any questions 440-321-5965

2427

Hardie Trim 5/4 Smooth H25
19 pieces 1" x 11 1/4" x 12' and 17 pieces 1" x 7 1/4" x 12'. Robo gray color. Contact Daniel Miller with any questions 440-321-5965

2428

2429

Pallet Racking
60" x 16'4" pallet racking, (5) uprights, (16) cross beams. Contact Daniel Miller with any questions 440-321-5965

2430

Pallet Racking
60" x 16'4" pallet racking, (5) uprights, (16) cross beams. Contact Daniel Miller with any questions 440-321-5965

2431

Pallet Racking
60" x 16'4" pallet racking, (5) uprights, (16) cross beams. Contact Daniel Miller with any questions 440-321-5965

2431A

Pallet Racking
(9) 60" x 16'6" upright only, tear drop style. Contact Daniel Miller with any questions 440-321-5965

2431B

Pallet Racking
(12) 60" x 16'6" upright only, tear drop style. Contact Daniel Miller with any questions 440-321-5965

2432

Heavy Duty Cart
30" x 48", 2 swivel caster and 2 stationary. Contact Daniel Miller with any questions 440-321-5965

2433

Mettler Toledo Pallet Scale
Model: IND236, 100-240V, 48" x 96". Weight capacity 5000LBS. Good working unit.

2434

Industrial Upcut Saw
Model: C500L-3-4799, electric drive, air controls, 5 hp 3 ph.

2435

Industrial Upcut Saw
Model: N510L-5-165496, electric drive, air controls, 10 hp 3 ph.

2436

Omega Chop Saw
Model: T50 350 US, 14" blade diameter, single phase, 230V and air powered. Very nice unit.

2437

Dump Hopper
48" wide x 56" long x 48" high

2437A

Dump Hopper
36" wide x 60" long x 36" high, on steel casters.

2437B

Dump Hopper
36" wide x 60" long x 36" high, on steel casters.

2438

Gardner Denver Blower
Model: 553-ADG, SN: P12098, powered by an electric motor, 25 hp 3 ph, 230/460V, 6" outlet.

2439

Hossfeld Bender
Size 2, SN: B-35070, flooring mounting plate measures 17" x 22 1/2". Does not include dies. Contact Daniel Miller with any questions 440-321-5965

2440

2 Woven Wire
2 rolls of woven wire, 48" height. Looks to be full rolls. Contact Daniel Miller with any question 440-321-5965

2441

Singer Industrial Sewing Machine
Model: 211 G155. Was used in buggy shop, line shaft ready, has no reverse. In good working condition. Contact Daniel Miller with any question 440-321-5965

2442

New Pulleys
4 blue 12" x 2 1/2" shaft x 2 1/8" wide, 4 green 11" x 1 3/16 shaft, variable speed. Contact Daniel Miller with any question 440-321-5965

2442A

Fuel Transfer Tank with 12V GPI Pump
In good condition.

2443

Cabinets
2 good used 5 drawer lateral file cabinets, 19" x 42" x 67". Contact Daniel Miller with any question 440-321-5965

2443A

Rubber Parking Lot Berms
Contact Daniel Miller with any questions 440-321-5965

2444

New Hydraulic Hose
(16) 3/4" x 8', (22) 3/4" x 6'. Contact Daniel Miller with any question 440-321-5965

2445

Skid of New Galvanized Bolts and Lags
3/8"-1/2"-5/8" diameter up to 8" long. Contact Daniel Miller with any question 440-321-5965

2445A

Skid of New Pulleys
8 total, 25" to 11". Contact Daniel Miller with any questions 440-321-5965

2445B

Skid of New Pulleys
20" to 4" and misc. sprockets. Contact Daniel Miller with any questions 440-321-5965

2446

Skid of New Sprockets
4 1/2" to 22". Contact Daniel Miller with any questions 440-321-5965

2447

New Pulleys
Total of 5, 8 1/2" x 28". Contact Daniel Miller with any questions 440-321-5965

2448

New Sprocket Repair Links
Assorted sizes from small to 200. Contact Daniel Miller with any questions 440-321-5965

2449

Skid of Roller Chains
50-1R, Morse 120H, and connector links. Contact Daniel Miller with any question 440-321-5965

2450

Skid of Banding Tools
Used banding tools and seals for plastic and metal. Contact Daniel Miller with any question 440-321-5965

2451

Strapping Tools
1 new with a part missing, 1 used metal strapping tool. Contact Daniel Miller with any question 440-321-5965

2452

Wall Mount Shop Fans
8 fans, electric drive.

2453

Craftsman Table Saw
Model: 11327520. 3/4hp electric motor, mounted on a wooden cabinet. Contact Daniel Miller with any questions 440-321-5965

2454

Misc. Poly Trim and Spindles
(10) spindles, (20) 3/8" thick x 8" wide x 72" long, various colors. Contact Daniel Miller with any questions 440-321-5965

2455

2456

Rubber Mats
(10) 4' x 8' x 3/4" thick. Like new. Contact Daniel Miller with any questions 440-321-5965

2457

Hand Puncher
Model: HP-20, Woodward-Fab hand punch

2458

Magnum Pressure Washer
4000 series with heater and hose reel, powered by a Honda engine. Good unit.

2459

Forks
4" x 42" x 16", 1 1/2" thick heel. Contact Daniel Miller with any questions 440-321-5965

2460

Forks
4" x 42" x 16", 1 3/4" thick heel. Contact Daniel Miller with any questions 440-321-5965

2461

Lumber Carts
2 Hamilton oak 4' x 8' x 18" with 2 rigid 3" x 16" center wheels and (4) 2" x 8" swivel caster. In good condition. Contact Daniel Miller with any questions 440-321-5965

2462

Ellis Metal Cutting Bandsaw
Model: 1500, 3/4 hp 1 ph, 7" x 10" cutting capacity, blade size 9'6" x 3/4" x .035. In good condition. Contact Daniel with any questions 440-321-5965

2463

Reznor N6 Heater
Condition unknown. Contact Daniel with any questions 440-321-5965

2464

Reznor N6 Heater
Model: HCR6250F, 115/24V. Contact Daniel with any questions 440-321-5965

2465

Reznor N6 Heater
Model: HCR6250F, 115/24V. Condition unknown. Contact Daniel with any questions 440-321-5965

2466

Tool Box
Yellow tool chest with electric tools, 21" x 35" x 39". Working condition. Contact Daniel Miller with any questions 440-321-5965

2467

2011 Eaton Transformer
Catalog # T20P11S50EE, Type: DS-4 single phase transformer, class AA 60 hz pri volts 240/480, sec volts 120/240 KVA50. Contact Daniel Miller with any questions 440-321-5965

2468

Peerless LHM-320 Hacksaw
With a Pyrotek saw frame height control, 2 hp 3 ph. Contact Daniel Miller with any questions 440-321-5965

2469

New Pella Window
71 1/2" x 59 1/2" white wood frame, 3/4" insulating glass. Has vinyl J channel. Contact Daniel Miller with any questions 440-321-5965

2470

New Pella Window
56" x 73" almond exterior-white exterior, 6 9/16" wall depth, crank out window. Contact Daniel Miller with any questions 440-321-5965

2471

New Pella Window
56" x 73" almond exterior-white exterior, 6 9/16" wall depth, crank out window. Contact Daniel Miller with any questions 440-321-5965

2472

New Simonton Window
5500 casement picture, 88" x 67" white vinyl crank window with J channel. Contact Daniel Miller with any questions 440-321-5965

2473

New Vinyl Jeldwen Window
96 x 48 black exterior, white interior crank window. Has nailing fin. Contact Daniel Miller with any questions 440-321-5965

2474

New Vinyl Jeldwen Window
96 x 48 black exterior, white interior crank window. Has nailing fin. Contact Daniel Miller with any questions 440-321-5965

2475

New Vinyl Perfexion Window
Replacement window. 25 3/4" x 29 5/16 double hung. Contact Daniel Miller with any questions 440-321-5965

2476

New Jeldwen Window
2 windows, double hung one has a damaged frame. 30" w x 48" h wood frame painted white. Contact Daniel Miller with any questions 440-321-5965

2477

New Pella Trapezoid Windows
2 vinyl windows, 36" wide x 36" long point. Contact Daniel Miller with any questions 440-321-5965

2478

New Pella Windows
Brown 36" x 52" vinyl frame glass and 1 new 28 1/2 x 24 1/2 vinyl replacement, double hung window. Contact Daniel Miller with any questions 440-321-5965

2479

New Simonton Windows
35 1/2" x 35 1/2" double hung vinyl window with nailing flange. Contact Daniel Miller with any questions 440-321-5965

2480

New Double Doors
Solid 36" x 79" double black stained doors with no frame. Contact Daniel Miller with any questions 440-321-5965

2481

New Solid Oak Door Slad
36" x 80" and a Simonton sliding door screen on rollers, dimensions are 35 1/4" wide x 75 1/2" high. Contact Daniel Miller with any questions 440-321-5965

2482

3 Painted White Doors
30" x 80". Contact Daniel Miller with any questions 440-321-5965

2483

3 Painted White Doors
(2) 30" x 80", (1) 24" x 80". Contact Daniel Miller with any questions 440-321-5965

2484

3 White Doors
(2) 22" x 80" with 5 1/4" jamp, (1) 30" x 80" with 5 1/4" jamp. Contact Daniel Miller with any questions 440-321-5965

2485

New Grey Kraftmaid Cabinets
27" x 90" x 24" tall cabinet, 27" x 35" x 24". Contact Daniel Miller with any questions 440-321-5965

2486

2487

Harrington Forklift Boom
6' long overall extends to 12', max capacity at 6' is 6000 lbs. 12'=2500 lbs. Contact Daniel Miller with any questions 440-321-5965

2488

Kelly Dock Leveler
Model: H630W, SN: D023144, 40,000 lbs capacity, 1 hp 3 ph, 6' wide x 8'9" with 16" drop, 24" high up to 56" high. Used. Contact Daniel with any questions 440-321-5965

2489

4 Metal Cabinets
36" wide x 84" high x 12" deep with shelving. Contact Daniel Miller with any questions 440-321-5965

2490

4 Metal Cabinets
36" wide x 84" high x 12" deep with shelving. Contact Daniel Miller with any questions 440-321-5965

2491

4 Metal Cabinets
36" wide x 84" high x 12" deep with shelving. Contact Daniel Miller with any questions 440-321-5965

2492

Bulk Tank
36 x 84 Copeland. Has a couple of dents on outside, approx 150 gallon, 9'4" overall length x 48" high. Contact Daniel with any questions 440-321-5965

2493

Tire Chains
Set of 2 skidder tire chains. Contact Myron Nissley with any questions 574-536-2481

2495

Engine Crane*
2000 lbs lift capacity, manual operation, mounted on casters. Contact Daniel Miller with any questions 440-321-5965

2496

Ammco Lift*
Model: B2900F, SN: P960221528, capacity 9000 lbs, lifting current 20 amps, 1 ph-60hz, power unit 31248-3, 230V. Contact Daniel Miller with any questions 440-321-5965

2497

Fuel Transfer Tank*
120 gallon capacity, 24" w x 60" l x 24" h. Contact Daniel Miller with any questions 440-321-5965

2498

Kohler Engine*
Kohler Command 25, 25 hp gas engine, electric start, no gas tank, good unit. Contact Daniel Miller with any questions 440-321-5965

2499

Power Washer and Hose Reel*
2000 psi electric washer, no wand, hose reel was used on a fire truck, loaded with high psi hose. Contact Daniel Miller with any questions 440-321-5965

2500

3 File Cabinets*
(3) 5 drawer file cabinets, 15" w x 27" d x 64" h.

2501

File Cabinet*
4 drawer file cabinet, 42" w x 19" d x 53" h

2502

3 File Cabinets*
(3) 5 drawer file cabinets, 15" w x 27" d x 64"

2503

5 File Cabinets*
(5) 2 drawer file cabinets

2504

3 File Cabinets*
(2) 4 drawer fire proof, no keys, 17" w x 30" d x 53" h. (1) 4 drawer file cabinet, 18" w x 27" d x 53" h.

2504A

10 Drawer File Cabinet*
Hardwood file cabinet. Very nice cabinet.

2505

Delta Tablesaw*
SN: 93G94359, powered by a air motor, 10" blade capacity, electric motor is included. Contact Daniel Miller with any questions 440-321-5965

2506

Powermatic 12" Planer*
Model: 100, no motor. Contact Daniel Miller with any questions 440-321-5965

2507

Grizzly Jointer*
Hydraulic drive. Contact Daniel Miller with any questions 440-321-5965

2508

Grizzly Belt/Disc Sander*
6" x 9" belt and disc sander, model: SD-69, air powered. Contact Daniel Miller with any questions 440-321-5965

2509

Compact Floor Bender*
Good condition. Contact Daniel Miller with any questions 440-321-5965

2510

DeWalt Sliding Compound Miter Saw*
SN: 11189, working condition. Contact Daniel Miller with any questions 440-321-5965

2511

Stihl Chainsaw, Air Skilsaws, and Misc.*
Stihl 026 needs tune up, 2 air powered Skilsaws, Senco stapler, die grinder, multi charging bus bar. Contact Daniel Miller with any questions 440-321-5965

2512

2513

Lot of Misc.*
2 log chains, (2) 3 ton jack stands. Contact Daniel Miller with any questions 440-321-5965

2514

Lot of Misc*
2 sets of harness and tugs, 1 bipolastic, 1 leather, and surrey pole. Contact Daniel Miller with any questions 440-321-5965

2515

Table Saw*
Sears and Roebuck, model: 10323420. Contact Daniel Miller with any questions 440-321-5965

2516

Remmey Pallet Hydraulic Pak*
Mfg date 6/22/2000. Tank capacity 30 gallon, mas psi 1200, with oil cooler, powered by a 15hp electric 3 phase 230/460V motor.

2517

Hydrualic Pak*
Powered by a 10hp 3ph electric motor, with a continental pump, 4000 psi

2518

Hydrualic Tank and Motor*
7.5hp 3 phase, 230/460V

2519

Vynil Pickett Fence*
48' tall, some are 6' and 8' long and there are 9 sections including a gate section. Contact Daniel Miller with any questions 440-321-5965

2550

Walnut 4/4 Boards
5 /12" wide, lift measurements 45" wide x 7' long x 35" high. Contact Daniel with any questions 440-321-5965

2551

Walnut 4/4 Boards
5 1/2" wide x 6' long. Lift measurements 48" wide x 6' long x 19" high. Contact Daniel with any questions 440-321-5965

2552

Walnut 4/4 Boards
6" and 4" wide, 6' to 8' long. Lift measures 53" wide x 34" high. Contact Daniel with any questions 440-321-5965

2553

Walnut 4/4 Boards
5"-5 1/2" wide, 7'-6' long. Lift measures 48" wide x 31" high. Contact Daniel with any questions 440-321-5965

2554

Walnut 4/4 Boards
5 1/2" wide, 6' and 8' long. Lift measures 48" wide x 31" high. Contact Daniel with any questions 440-321-5965

2555

Walnut 4/4 Boards
5 3/4" wide, 6' and 7' long. Lift measures 50" wide x 37" high. Contact Daniel with any questions 440-321-5965

2556

Walnut 4/4 Boards
5 1/2" wide, 6'-7' and 8' long. Lift measures 47" wide x 35" high. Contact Daniel with any questions 440-321-5965

2557

Grade Outs Mixed Hardwoods
4/4 random width, lift measures 46" w x 38" h approx. 10' long. Contact Daniel Miller with any questions 440-321-5965

2558

Grade Outs Mixed Hardwoods
4/4 random width, lift measures 48" w x 40" h approx. 10' long. Contact Daniel Miller with any questions 440-321-5965

2559

Kiln Dried Grade Outs
4/4 random width and various lengths. Mostly red oak. Contact Daniel with any questions 440-321-5965

2560

Kiln Dried Grade Outs
4/4 random width and various lengths. Mostly red oak. Contact Daniel with any questions 440-321-5965

2561

Kiln Dried Grade Outs
4/4 random width and various lengths. Mostly red oak. Contact Daniel with any questions 440-321-5965

2562

Kiln Dried Grade Outs
4/4 random width and various lengths. Mostly red oak. Contact Daniel with any questions 440-321-5965

2563

Kiln Dried Grade Outs
4/4 random width and various lengths. Mixed species Contact Daniel with any questions 440-321-5965

2564

Kiln Dried Grade Outs
4/4 random width and various lengths. Mixed species Contact Daniel with any questions 440-321-5965

Lake Erie Equipment Auction Ring 2Previous Page Listing ID#: 1567944

Free Email Notifications

Share This Listing

Other Sales byThis Company

Sponsored Links

Lake Erie Equipment Auction Ring 2

Login

Sign Up

Sign Up

Login

Lake Erie Equipment Auction Ring 2
Previous Page Listing ID#: 1567944

Other Sales by
This Company