THIS IS A COMPLETED SALE
View current listings by this company

Pine Log Company, Inc
Previous Page Listing ID#: 1567895

Auction Location
State Road, NC 28676

Auction Dates and TimesSALE IS COMPLETED
Thursday Dec 28, 2023 Completed

Auction Type
Live Auction

Company Information
Bright Star Realty and Auctions, INC Contact: Loren Beachy Phone: 574-825-0704 Email: beachyauctions@gmail.com Website: brightstarauctions.com GoToAuction.com ID#: 5286 View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area! You may set up alerts by area (zip and radius), keywords, and by company. It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Bidder Terms and Conditions There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items. These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid. “Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION. “Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids. “Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected. “Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder. “Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms. “Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer. "Buyer" means the Winning Bidder with respect to each Lot of Personal Property. "Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. “Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation. “Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer. “High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot. “High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price. “High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot. "Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event. “Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer. “No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale. “Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions. “Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online. "Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered. “Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers. “Personal Property” means all tangible and moveable property, including fixtures, designated as Property. “Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer. “Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer). “Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction. “Property” means the Real Property and the Personal Property. “Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction. “Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction. “Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE. “Reserve Price” means the minimum price that Seller is willing to accept for specific Property. “Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer. “Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid. “Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller). "Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid. “Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration. Governing Law. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online: Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Cash payments totaling Ten Thousand Dollars ($10,000) or more will not be accepted. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion. Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers. ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyer’s account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death. Insurance. Any work performed by Purchaser(s) or Purchaser Representative (including sub-contractors) shall be insured and provide proof of coverage against all claims for injuries against persons or damages to property which may arise from or in connection with the removal of items or equipment. Insurance coverage requirements are as follows: General Liability $1,000,000/$2,000,000 and Worker’s Compensation $1,000,000 or as required by State Law. Seller shall be listed as additionally insured, if required. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.

1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
2. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
3. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
4. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
5. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Cash payments totaling Ten Thousand Dollars ($10,000) or more will not be accepted. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.

Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyer’s account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Insurance. Any work performed by Purchaser(s) or Purchaser Representative (including sub-contractors) shall be insured and provide proof of coverage against all claims for injuries against persons or damages to property which may arise from or in connection with the removal of items or equipment. Insurance coverage requirements are as follows: General Liability $1,000,000/$2,000,000 and Worker’s Compensation $1,000,000 or as required by State Law. Seller shall be listed as additionally insured, if required.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.

Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Information
This location only, this sale does not disrupt the succesful ongoing operations of any other Randy D Miller locations. 00 Information Lot Type of Auction: Sawmill/Rolling Stock Highlight Pieces: 7' Mcdonough headrig, 7' Salem resaw system, 2022 Volvo L120 wheel loader, late model rolling stock! Auction Agent: Zach Kittrell 931-224-0699 01 Preview & Inspection Buyers are responsible to do their own inspection to determine the condition of the items they purchase. Inspections times are available as follows: December 27, 2023 9am-4pm. All other previews must be by appointment only. Contact: 931-698-7058 for appointment information. Location of Auction: 118 Traditional Living Road, State Road, NC 28676 02 Loadout Information Equipment must be removed by April 1, 2024. 03 Payment Information Payment terms: 10% Onsite and 13% Online Buyer's Premium in affect for all purchases. Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. 04 CAT 390F L Hydraulic Excavator 1:50 Scale Replica - Die Cast Metal Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 98 Heavy Equipment Key Set 36 Keys Shipping available for $20 99 Manual Sealless Steel Strapping Tool Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30 100 Barko 160D Stationary Knuckleboom SN: 22709, meter reads: 5181 hours, 460V, 3 ph, 48" continuous grapple, enclosed cab with window AC unit, electric/hydraulic drive, includes support steel to concrete 101 3 Strand Log Deck Electric drive, 10'6" x 13'6", includes support steel to ground 102 Morbark Log Trough SN: 8552, 4' x 20', 12" ladderback chain, hydraulic drive, includes support steel to ground 103 Hydraulic Pack 24" x 32" x 13" tank, hp on motor unknown, includes all pumps, valves, and all hydraulic lines to equipment 104 Belt Conveyor Electric drive, includes support steel to ground, 36" belt, 5' x 15' 105 MDI TWA-2000 Metal Detector Includes control panel mounted to operator's cab 106 Log Trough 12" ladderback chain, 4' x 26', hydraulic cylinders on log kickers, electric drive, includes support steel to ground 107 10hp Hydraulic Pack 18" x 24" x 18" tank, includes pump, valves, and all hydraulic lines to equipment 108 Morbark Debarker (1st of an entirety) Does not include main electric drive or troughs, hydraulic cylinders and pumps on moving heads, includes hydraulic pack with valve station and all hydraulic lines to debarker entirety 109 Electric Motor (Part of an entirety) 100 hp, 1770 rpm, 3 ph 110 Morbark Infeed Log Trough (Part of an entirety) Hydraulic drive, 13" belt chain, 54" x 20', includes support steel to ground 111 Morbark Outfeed Log Trough (Part of an entirety) 12" ladderback chain, hydraulic drive, hydraulic cylinders on dual sided log kickers, 54" x 28', includes support steel to ground 112 Barn Sweep (Part of an entirety) 4' x 28' flat section, 22' incline section, electric drive, 15" paddles, includes slide pan 113 Morbark Operator's Cab (Part of an entirety) 54" x 6' x 7' tall, includes legs to ground and catwalk and steps around cab, has window AC unit, includes all controls in cab 114 Morbark Debarker Entirety of Lots 108-113 With 10% raise 115 4 Strand Log Deck with Stop'n'Load Electric drive, includes support steel to ground, 13'6" x 19', hydraulic cylinder on loading arm, H78 chain, missing chain on 1 strand 116 Cleereman 38 3HB Carriage and Track (1st of an entirety) SN: 38-297-88, 1st HB to 2nd HB-78", 2nd HB to 3rd HB-54", 7' x 15', 3 axle, pantograph, computerized setworks and controls in cab, air dogs, air over 110 power, 3/4" dogs, track is 50" center to center, 60' long track, includes all support steel to ground, pulleys in track not included 117 Tyrone Berry Carriage Drive (Part of an entirety) Model: SMA-225, SN: G-1046, Roll of 3/4" steel cable, pump, and pulleys, mounted on track, 60 hp electric motor, 26" x 31" x 15" tank, hydraulic pumps and valves, cooling unit, includes all hydraulic lines to equipment 118 56" Husk with Top Saw (Part of an entirety) 56" F7 style circle saw-in good condition, 36" F8 style top saw, 40 hp electric motor for top saw, main electric drive for husk not included, 2' x 6' off bear, belt runs off slab dump motor, includes hydraulic tank with pump that runs off mandrel shaft 119 Electric Motor (Part of an entirety) 150 hp, 1780 rpm, 444T frame, 480V 119A Motor Starter (Part of an entirety) 150 hp starter, 400 amp disconnect, includes conduit from boxes to motor, no inlet wire included 120 Slab Dump (Part of an entirety) 24" belt, 3' x 13'6", electric drive, air cylinder for dump, controls in cab 121 Log Turner and Nose Skids (Part of an entirety) 36" chain type turner, hydraulic cylinder and drive, 4' x 10' nose skids, controls in cab 122 Sawyer's Cab (Part of an entirety) 4' x 6' x 75" tall, has AC unit, includes catwalk around cab and steps up to cab, includes no controls 123 Cleereman 3HB Carriage Entirety of Lots 116-122 With 10% raise 124 3 Strand Log Deck with Stop'n'Load Electric drive with Tulsa Gearbox, hydraulic cylinder on loading arm, 12' x 23'6", includes support steel to ground, air cylinders on log pushers 125 56" Circle Saw F7 style, good condition 126 56" Circle Saw F8 style, good condition 127 56" Circle Saw F7 style, good condition 128 56" Circle Saw F8 style, good condition 129 56" Circle Saw F7 style, good condition 130 56" Circle Saw No bits or shanks, needs repair 131 56" Circle Saw F7 style, missing some bits and shanks, needs repair 132 56" Circle Saw F7 style, good condition 133 56" Circle Saw F8 style, good condition 134 56" Circle Saw No bits or shanks 135 56" Circle Saw No bits or shanks 136 56" Circle Saw F7 style, good condition 137 56" Circle Saw F7 style, missing a few bits and shanks, good condition 138 Roll Case with Pop-Up Transfers 6 1/2" x 24" rolls, 12-24" spacing, 3' x 52' roll case, electric drive, (3) separate pop-up transfer, (1) 3 strand-3' x 10'6", (1) 3 strand-4' x 10'6", (1) 3 strand-7'6" x 9'6" with 3 arm, cant loading arm 139 Ligna Gang Saw (1st of an entirety) SN: F162931, does not include feeds or electric drive, 12" x 48" capacity, laser lights, single arbor, set up with (21) 30" carbide tip blades, includes all catwalk around gang saw and infeed rolls, includes shelf of assorted spacers on catwalk, includes support steel to ground, includes control panels by infeed rolls 140 Electric Motors (Part of an entirety) Used to power lot 139, (2) 250 hp, 1785 rpm, no conduit or electric panels included 141 Motor Starters (Part of an entirety) Delta C2000 250 hp starter, MED GMC-800 250 hp starter, (2) 400 amp disconnects, includes conduit from panel to motors, no inlet conduit included 142 Ligna Infeed Rolls (Part of an entirety) SN: F162980, hydraulic drive and cylinders, 8 1/2" x 48" rolls, 42" spacing, 3 strand 75" x 10'6" 2 way transfer, 80" x 14'6" overall, includes support steel to ground 143 Ligna Outfeed Rolls (Part of an entirety) Hydraulic drive, 8 1/2" x 48" rolls, varied spacing, 5' x 20' includes support steel to ground and catwalk over top of rolls 144 5hp Hydraulic Pack (Part of an entirety) 18" x 30" x 13" tank, includes pump, valves, and all hydraulic lines to equipment 145 Ligna Gang Saw Entirety of lots 139-144 With 10% raise 145A Gang Saw Blades All are 30" with 4 3/4" arbor, (36) freshly sharpened blades, (9) used blades-in good condition, may need to be sharpened, includes 4' x 6' tall blade rack 146 3 Strand Log Deck with Stop'n'Load Electric drive with Tulsa Gearbox, includes support steel to ground, 8' x 10'6", H78 chain, air cylinder on loading arm 147 Scragg Mill (1st of an entirety) Electric motors for heads not included, (2) 52" F6 style circle saws, (2) 11" x 5' off bear belts with electric drive, 22" x 40" capacity, hydraulic cylinder on push down roll and chain feed with rollers, 40' long single strand chain feed, includes all support steel to ground 147A Scragg Operator's Cab (Part of an entirety) 54" x 5' x 7' tall, includes legs to floor and catwalk steps, window AC unit, includes control panel for Scragg mill 148 Electric Motors (Part of an entirety) Used on lot 147, (2) 100 h, 1765 rpm, 404T frame, 460V, no electric panels included 149 Motor Starters (Part of an entirety) (2) 100 hp motor tronics motor starter, Model: VMX-S-160-CB-4, includes 400 amp disconnect box, includes conduit from box to motors, no inlet wire included 150 Hydraulic Pack (Part of an entirety) HP unknown, 16" x 34" x 14" tank, includes pumps, valves, and all hydraulic lines to equipment 151 Scragg Mill Entirety of Lots 147-150 With 10% raise 152 Belt Conveyor 16" belt, 18" pan, 6" sides, 22" x 40' long, support steel to ground, includes adjustable slide pan, air cylinders on pan 153 Belt Conveyor 16" belt, 18" pan, 6" sides, 22" x 40' long, support steel to ground, includes adjustable slide pan, air cylinders on pan 154 Spiral Roll Case Electric drive, 6 1/2" x 36" rolls, 16-24" spacing, 45" x 20'6", includes support steel to ground 155 3 Strand Transfer Deck with Stop'n'Load 11' x 25', electric drive, H78 chain, air cylinders on both loading arms, includes support steel to ground 156 Roll Case 28" x 47', electric drive, 6 1/2" x 15" rolls, 28" spacing 157 Roll Case with Transfer 7' x 12', 4 strand transfer, 6 1/2" x 60" rolls, 24" spacing, electric drive 158 4 Strand Transfer H78 chain with pegs, strands go over gang saw outfeed, electric drive, 11' x 12' 159 3 Strand Transfer Deck Electric drive, C55D rooftop chain, 9'6" x 14'6", includes support steel to ground 160 Cornell 2 Blade Edger 32" x 8' dead roll infeed, manual blade movement, 5" x 28" capacity, 40 hp electric motor, includes disconnect, 6" x 14' tailing belt outfeed, (2) 14" blades-both moveable 161 Dust Auger Underneath lot 160, electric drive, 8" auger, 16" x 12' 162 6 Strand Transfer Deck Electric drive, used for waste under tailing belt, includes slide pan, only has chain on 2 strands, 7' x 15', in roughly a triangle shape 163 Belt Conveyor 22" x 24' incline section, 50' flat section over trimsaw, 15" belt, 18" pan, 6" sides, electric drive 164 Belt Conveyor 22" x 24' incline section, 50' flat section over trimsaw, 15" belt, 18" pan, 6" sides, electric drive 165 Belt Conveyor 18" belt and pan, 6" sides, electric drive, 2' x 42' 166 Roll Case Electric drive, first 15' is 6 1/2" x 10" spiral rolls with 24" spacing then switches to 6 1/2" x 22" rolls on 24" spacing, 32" x 48' overall 167 Roll Case 3' x 35', 4 strand, 3' x 12' pop-up transfer-missing chain on 1 strand, 6 1/2" x 22" rolls, 24" spacing, includes (2) electric drives 168 4 Strand Transfer Deck C55D rooftop chain, electric drive, 11'6" x 28', includes support steel to ground 169 Corley 6 Strand Unscrambler SN: 75-LU-001, H78 chain with pegs, 8' x 16' x 65" tall, electric drive 170 Corley 10 Head Drop Saw Trimmer 2 heads uninstalled, 26" saws, 15 hp electric motor on each head, includes control stand and electric panel with starters, disconnect included, 8' x 30' x 8' tall, 28' waste belt with electric drive 170A Trim Saw Blades (12) 26" blades with 1 5/16" arbor, all freshly sharpened-ready to use 171 4 Strand Green Chain Electric drive, C55D rooftop chain, 10'6" x 53' 172 3 Strand Transfer Deck H78 chain, electric drive on 1 strand, H78B rooftop chain on 2 strands, 10'6" x 35' 173 Lumber Carts (3) 90" x 8', straight wheels, heavy duty 174 Lumber Carts (2) 90" x 8', straight wheels, Heavy duty, (1) 4' x 90" straight wheels, heavy duty 175 Lumber Carts (4) 90" x 8', straight wheels, heavy duty 176 Lumber Rack 88" x 9'6" x 7' tall, made from 6" x 6" tube steel-1/2" thick 177 Lumber Carts (1) 52" x 90", needs 2 wheels, (2) 90" x 8', straight wheels, heavy duty 178 Lumber Carts (3) 90" x 8', straight wheels, heavy duty 179 Lumber Carts (4) 90" x 8', straight wheels, heavy duty 180 Belt Conveyor 17" belt, 19" pan, 6" sides, electric drive, 2' x 39' 181 Webster Vibrating Conveyor Electric drive, 24" pan, 10" flared sides, 38" x 60' 182 Webster Vibrating Conveyor SN: 092512301, Electric drive, 24" pan, 10" flared sides, 38" x 42', includes slide pans 183 Webster Vibrating Conveyor Electric drive, 18" pan, 6" flared sides, includes fine section, 27" x 30', located under gangsaw 184 Belt Conveyor 18" belt, 20" pan, 8" sides, electric drive, 26" x 9' section with air cylinder for lift, 20' flat section 185 Belt Conveyor 18" belt, 20" pan, 8" sides, electric drive, 26" x 28' 186 Belt Conveyor 19" belt and pan, 8" sides, electric drive, 23" x 42' long, includes slide pans 187 Barn Sweep Electric drive, 11" paddles, 5' x 80' long 188 Barn Sweep 14 1/2" paddles, electric drive, 44" x 27' flat section, 30' incline section behind husk 189 3 Strand Transfer Deck 10'6" x 35', electric drive, includes shafts and sprockets on both ends, air cylinder on board stop arm, includes support steel to ground 190 3 Strand Transfer Deck Electric drive, includes shaft shared with roll case, 11' x 29', 3 strand 4' long tipple loading arms with air cylinder 191 3 Strand Transfer Deck Electric drive, 10'6" x 31', support steel to ground included 192 Salem 7' Line-Bar Resaw (1st of an entirety) SN: 166285-94, 13" x 7' bandwheels, 1 1/2" mead on top wheel, 10" band, includes power feed rolls, feed is fully hydraulic, main electric drive not included, includes support steel to first cross beam, 10 1/2" x 32" rolls, 28" spacing, hydraulic cylinders on press-in rolls. Nice unit! 193 Electric Motor (Part of an entirety) 200 hp, 8120C frame, 885 rpm, 440V 194 Benshaw Soft Start (Part of an entirety) SN: XM20110249-1-1, 200 hp, 480V, 240 amps, includes conduit from panel to motor, no inlet wire included 195 Salem 4 Strand Transfer Deck (Part of an entirety) Electric drive, 11'6" x 12', does not include shared shafts on either end, includes support steel to first cross beam 196 Salem Infeed Rolls (Part of an entirety) Electric drive on 4 strand transfer, hydraulic drive on rolls, air cylinders, 8' x 18', 10 1/2" x 36" rolls, 30"-40" spacing, includes shared shafts as marked, includes support steel to 1st cross beam 197 Salem 4 Strand Transfer Deck (Part of an entirety) Electric drive, air cylinders on (4) cant loading arms, 13' x 15'6", includes shaft shared with lot 196, includes support steel to 1st cross beam 198 Salem 4 Strand 180 Degree Transfer Deck (Part of an entirety) Electric drive, 12' wide, 19'6" inside to inside measurement, includes support steel to 1st cross beam 199 4 Strand Transfer Deck (Part of an entirety) Electric drive, 12' x 13', air cylinder on loading arm, H78B rooftop chain, 3' x 19' 4 arm tipple board loading arm, includes support steel to 1st cross beam 200 Salem Outfeed Rolls (Part of an entirety) 6 1/2" x 54" rolls, 24"-30" spacing, (2) 4 strand 2 way transfer, electric drive on transfers, hydraulic drive on rolls, air cylinders on board stops and pop-ups, 8' x 21', includes support steel to ground 201 Operator's Cab (Part of an entirety) 5' x 10' x 90" tall, includes catwalk steps, window AC unit, includes all controls in cab, includes control stand in middle of run-around system, includes steel legs to 1st cross beam 202 Allen-Bradley Centerline Motor Control Center (Part of an entirety) 800 amp horizontal, 300 amp vertical, 15" x 13'6" x 92" tall, includes motor starters on wall as marked 203 Hydraulic Unit (Part of an entirety) (2) 30 hp motors, 2' x 6' x 20" tank, includes pumps, valves, cooling unit, and all hydraulic lines to equipment 204 Salem Line Bar Resaw and Run-Around System of Lots 192-203 With 10% raise 205 Bands 10" bands, sharpened, ready to use. Total of 13 bands 206 Salem Roll Case with Transfers Electric drive, air cylinders on board stops, 10 1/2" x 54" rolls, 32" -36" spacing, (2) 4 strand 2 way transfers, 8' x 18', includes support steel to 1st cross beam 207 4 Strand Transfer Deck 11' x 17'6", includes support steel to ground, does not include shaft, shared with lot 200 or electric drive shared with lot 208 208 Salem Roll Case 6 1/2" x 64" rolls, 28" spacing, electric drive, 6' x 28', 4 strand transfer in roll case 209 Barn Sweep Electric drive, 10 1/2" paddles, 3' x 40' incline section, 30' flat section 210 Gardner Denver Air Compressor Meter reads: 34840 hours, 75 hp electric motor, includes starter and disconnect, includes oil cooling unit, 56" x 90" x 66" tall overall, includes air line from compressor to dryer 211 Sullair Air Compressor Model: 20-100L-ACAC, SN: 003-79371, meter reads: 34168 hours, 100 hp electric motor, includes disconnect, oil cooling unit, 62" x 8' x 6' tall, includes air line from compressor to dryer 212 Sullair Air Compressor Model: 16B-75H-ACAC, SN: 003-66142, meter reads: 14137 hours, 75 hp electric motor, oil cooling unit, 45" x 75" x 5' tall, includes disconnect, includes air line from compressor to dryer 213 Hankinson Refrigerated Air Dryer Model: 80500, SN: 0311A-3-9604-14, 500 scfm at 100 psig, includes all air line from dryer to equipment, no infeed air line included 214 Sullair Air Compressor Model: 150-E-40HP, SN: 5116-KLP, meter reads: 17601 hours, 125 max psig, 40 hp electric motor, 34" x 53" x 48" tall, no air line included 215 Comp Air Kellogg Air Compressor Model: 6030TEL, SN: V9I14542LCR, 30 hp electric motor, 24" x 64" horizontal air tank, no air line included 216 Pneumatic Heatless Regenerative Air Dryer Model: PH-400, SN: 0402-S140140-043722, 150 psig max pressure, 2 tanks, includes all air line and filters from lots 214 and 215 to dryer and all air line from dryer t equipment 217 Jocar Horizontal Resaw (1st of an entirety) Model: 1400/200, SN: 272, made in 1998, 27" x 27" infeed capacity, does not include main electric drive, includes 2 control panels, 27 1/2" x 11' chain feed, hydraulic drive on feed, air cylinders on press down rolls, 8" x 56" band wheels, 1 1/4" thickness on wheels, 6 1/2" band, 11' x 13'6" overall, includes support steel to ground, includes guide grinder 218 WEG Electric Motor (Part of an entirety) 100 hp, 280S/M frame, 1785 rpm 219 Motor Starters (Part of an entirety) Jocar 460V motor control panel, includes control panel at end of outfeed rolls 220 Ligna Infeed Rolls (Part of an entirety) SN: F162585, hydraulic drive, air cylinder on tipple arm, 8 1/2" x 30" rolls, 24" spacing, 6' x 14'6", 5 strand skate roll tipple arm-30" long 221 Ligna Outfeed Rolls (Part of an entirety) SN: F162587, 80" x 19' overall, hydraulic drive, 6 strand-4' x 15' transfer, 6 1/2" x 39" rolls, 30" spacing, 8 strand 18" long skate rolls, includes support steel to ground 222 20hp Hydraulic Pack (Part of an entirety) 27" x 48" x 14" tank, includes pumps, valves, cooling unit and all hydraulic lines to equipment 222A 6 Strand Transfer Deck (Part of an entirety) C55D rooftop chain, electric drive, 10'6" x 11', air cylinder on loading arm. Marked as 225 222B 15hp Hydraulic Pack (Part of an entirety) 24" x 40" x 18" tank, includes pumps, valves, cooling unit, and all hydraulic lines to equipment. Marked as 226 222C Belt Conveyor (Part of an entirety) Electric drive, 18" belt, 19" pan, 3" sides, 2' x 38'. Marked as 228 222D Belt Conveyor (Part of an entirety) Electric drive, 18" belt and pan, 6" sides, 22" x 8'. Marked as 229 222E Belt Conveyor (Part of an entirety) Electric drive, 16" belt, 20" pan, 8" sides, 25" x 25'. Marked as 230 222F Tipple Arms (Part of an entirety) (2) 32" x 19' long tipple arms with skate rolls, air cylinders for tip. Marked as 231 222G Belt Conveyor (Part of an entirety) Electric drive, 18" belt, 20" pan, 8"-42" sides, 2' x 31". Marked as 232 222H 3 Strand Transfer Deck (Part of an entirety) Electric drive, 15' x 15'6", steel slats across width of deck. Marked as 233 223 Jocar Resaw Entirety of Lots 217-222H With 10% raise 224 Bands (14) 6" bands, sharpened, fits lot 217 227 6 Strand Transfer Deck H78B rooftop chain, electric drive, 12' x 45', includes support steel to ground and catwalk beside deck 234 6 Strand Transfer Deck C55D rooftop chain, electric drive, 10'6" x 16' 235 Edmiston 2 Blade Edger 3' x 5' dead roll infeed, control panel, (2) 16" blades-both moveable, hydraulic blade movement, 4" x 30" capacity, 40 hp electric motor, includes disconnect, 6" x 15' tailing belt-hydraulic drive, includes hydraulic tank, laser lights 236 Belt Conveyor Electric drive, 19" belt, 25" pan, 28" x 16', 3 sides, air cylinder for belt drop 237 6 Strand Green Chain C55D rooftop chain, electric drive, 10'6" x 40' 238 Lumber Carts 4 carts, 4' x 90", straight wheels, heavy duty 239 Lumber Carts 5 carts, 4' x 90", straight wheels, heavy duty 240 Precision 58" 8 Knife Chipper (1st of an entirety) SN: C-3232, Size: 58 x 15, bottom discharge, does not include motor, good knives 241 Electric Motor (Part of an entirety) 150 hp, 900 rpm, 460V, frame-15 242 Motor Starter (Part of an entirety) Metasol motor starter, 400 amp disconnect box 243 Chain Conveyor (Part of an entirety) Electric drive, 11" ladderback chain with 18" steel slats, 3' x 24' 244 Precision Chip Shaker (Part of an entirety) 5' x 10' screen, electric drive, includes all support steel to ground 245 Belt Conveyor (Part of an entirety) 12" belt, electric drive, 15" x 21'6" 246 Concave Belt Conveyor (Part of an entirety) Electric drive, 30" cleated belt, 4' x 37', includes catwalk on side of belt 247 Precision Chipper Entirety of Lot 240-246 With 10% raise 248 Webster Vibrating Conveyor 24" pan, 10" flared sides, electric drive, includes fiberglass section and chipper infeed section, does not include metal detector, 37" x 87' 249 MDI Metal Detector Includes control panel 250 Dust Auger Electric drive, 8" auger, 15" x 34' 251 Dust Auger Electric drive, 8" auger, 15" x 40' 252 Motor Starters and Disconnects Includes all starters and disconnects as marked on wall by Jokar Resaw system, no conduit included 253 Conduit Includes all conduit from boxes in lot 252 to equipment, no inlet wire included, no 110V wire included 254 Motor Starters and Disconnects Includes all starters and disconnects as marked on wall facing Scragg mill, no conduit included 255 Conduit Includes all conduit from all boxes in 254 to equipment, no inlet wire or 110V wire included 256 Motor Starters and Disconnects Includes all starters and disconnects as marked on both sides of wall towards Head Saw, no conduit included 257 Conduit Includes all conduit from all boxes in 256 to equipment, no 110V or inlet wire included 258 Mellott Rosserhead Debarker SN: 91200242, , item # 200, type 10, 2 1/2" x 24" bull wheels, 2 15/16" shafts, aluminum cutting head, 30 hp electric motor on head, hydraulic cylinders on log kickers, 90" x 33' overall, 54" x 5' x 90" tall cab with all controls, no cable on drum, flat track, 12" x 32" x 32" hydraulic tank, uninstalled 260 McDonough 7' Right Hand Bandmill (1st of an entirety) Air strain (SN: 84MA-164) 13" face, 1 1/8" thickness, runs 10" blades, includes 5' off bearer belt. This is a very nice unit! Currently uninstalled, has been sitting inside out of the rain and weather since it was purchased back in 2020. 261 Toshiba Electric Motor (Part of an entirety) 250 hp, N587UZ frame, 460V, 1185 rpm, uninstalled 262 McDonough 7' Head Rig Entirety of Lots 260-261 With 10% raise 275 Volvo L120E Wheel Loader SN:L120EV64158. Meter reads: 26,636 hours. Engine: 6 cylinder. Fuel type: Diesel. ROPS: Fully enclosed. 3rd Valve: Yes. Center to center of pins: 25 1/2". Tire Size: 23.5R25. Attachments: None included. Heater: Yes. A/C: Yes. Quick Attach: Yes. Features and Notes: Runs and operates as it should. 275A Volvo Quick Attach Bucket Model: 92687, SN: 04-01-04C, 5' x 9' x 5' tall 290 2000 Timberjack 608L Truck Feller Buncher SN: 10BA1147, meter reads: 7668 hours, Gilbert rotating cutting head, 8.3L Cummins diesel engine, runs strong, 24" tracks, undercarriage in great condition, fully enclosed cab with radio, heat, and pilot joystick controls. Runs and operates great. 320 2001 Mack CL713 Log Truck VIN #: 1M2AD38C21M011905. Mileage: 294,811. Engine Type: Mack E7-400 (SN: 1C2147). Fuel Type: Diesel. Horsepower: 400HP. Transmission: 9 speed Eaton. Log loader: None. Suspension: Air and Spring Leaf. GVWR: Approx. 65,000 lbs. Heat/AC: Yes. Double frame: Yes. Tire size: (rear 2 axles) 11R22.5, (lift axles) 255/70R22.5, (steer axle) 425/65R22.5. Features and Notes: Quad axle, 24' log bed, 7' wide x 90" tall bunks. Had engine fully rebuilt by Mack earlier this year, less than 1000 miles on new engine. Starts and runs great. 321 2001 Mack CL713 Log Truck VIN #: 1M2AD38C81M011858. Mileage: 292,752. Engine Type: Mack E7-400 (SN: 1A0314). Fuel Type: Diesel. Horsepower: 400HP. Transmission: 9 speed Eaton. Log loader: None. Suspension: Air and Spring Leaf. GVWR: 64,000 lbs. Heat/AC: Yes. Double frame: Yes. Tire size: (rear axles) 11R22.5, (lift axles) 255/70R22.5, (steer axle) 425/65R22.5. Features and Notes: Quad axle, 27' log bed, 90" x 90" log bunks

Listing Information

This location only, this sale does not disrupt the succesful ongoing operations of any other Randy D Miller locations.

Information Lot
Type of Auction: Sawmill/Rolling Stock
Highlight Pieces: 7' Mcdonough headrig, 7' Salem resaw system, 2022 Volvo L120 wheel loader, late model rolling stock!
Auction Agent: Zach Kittrell 931-224-0699

Preview & Inspection
Buyers are responsible to do their own inspection to determine the condition of the items they purchase. Inspections times are available as follows: December 27, 2023 9am-4pm. All other previews must be by appointment only. Contact: 931-698-7058 for appointment information.
Location of Auction: 118 Traditional Living Road, State Road, NC 28676

Loadout Information
Equipment must be removed by April 1, 2024.

Payment Information
Payment terms: 10% Onsite and 13% Online Buyer's Premium in affect for all purchases. Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction.

CAT 390F L Hydraulic Excavator 1:50 Scale Replica - Die Cast Metal
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s

Heavy Equipment Key Set 36 Keys
Shipping available for $20

Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

100

Barko 160D Stationary Knuckleboom
SN: 22709, meter reads: 5181 hours, 460V, 3 ph, 48" continuous grapple, enclosed cab with window AC unit, electric/hydraulic drive, includes support steel to concrete

101

3 Strand Log Deck
Electric drive, 10'6" x 13'6", includes support steel to ground

102

Morbark Log Trough
SN: 8552, 4' x 20', 12" ladderback chain, hydraulic drive, includes support steel to ground

103

Hydraulic Pack
24" x 32" x 13" tank, hp on motor unknown, includes all pumps, valves, and all hydraulic lines to equipment

104

Belt Conveyor
Electric drive, includes support steel to ground, 36" belt, 5' x 15'

105

MDI TWA-2000 Metal Detector
Includes control panel mounted to operator's cab

106

Log Trough
12" ladderback chain, 4' x 26', hydraulic cylinders on log kickers, electric drive, includes support steel to ground

107

10hp Hydraulic Pack
18" x 24" x 18" tank, includes pump, valves, and all hydraulic lines to equipment

108

Morbark Debarker
(1st of an entirety) Does not include main electric drive or troughs, hydraulic cylinders and pumps on moving heads, includes hydraulic pack with valve station and all hydraulic lines to debarker entirety

109

Electric Motor
(Part of an entirety) 100 hp, 1770 rpm, 3 ph

110

Morbark Infeed Log Trough
(Part of an entirety) Hydraulic drive, 13" belt chain, 54" x 20', includes support steel to ground

111

Morbark Outfeed Log Trough
(Part of an entirety) 12" ladderback chain, hydraulic drive, hydraulic cylinders on dual sided log kickers, 54" x 28', includes support steel to ground

112

Barn Sweep
(Part of an entirety) 4' x 28' flat section, 22' incline section, electric drive, 15" paddles, includes slide pan

113

Morbark Operator's Cab
(Part of an entirety) 54" x 6' x 7' tall, includes legs to ground and catwalk and steps around cab, has window AC unit, includes all controls in cab

114

Morbark Debarker Entirety of Lots 108-113
With 10% raise

115

4 Strand Log Deck with Stop'n'Load
Electric drive, includes support steel to ground, 13'6" x 19', hydraulic cylinder on loading arm, H78 chain, missing chain on 1 strand

116

Cleereman 38 3HB Carriage and Track
(1st of an entirety) SN: 38-297-88, 1st HB to 2nd HB-78", 2nd HB to 3rd HB-54", 7' x 15', 3 axle, pantograph, computerized setworks and controls in cab, air dogs, air over 110 power, 3/4" dogs, track is 50" center to center, 60' long track, includes all support steel to ground, pulleys in track not included

117

Tyrone Berry Carriage Drive
(Part of an entirety) Model: SMA-225, SN: G-1046, Roll of 3/4" steel cable, pump, and pulleys, mounted on track, 60 hp electric motor, 26" x 31" x 15" tank, hydraulic pumps and valves, cooling unit, includes all hydraulic lines to equipment

118

56" Husk with Top Saw
(Part of an entirety) 56" F7 style circle saw-in good condition, 36" F8 style top saw, 40 hp electric motor for top saw, main electric drive for husk not included, 2' x 6' off bear, belt runs off slab dump motor, includes hydraulic tank with pump that runs off mandrel shaft

119

Electric Motor
(Part of an entirety) 150 hp, 1780 rpm, 444T frame, 480V

119A

Motor Starter
(Part of an entirety) 150 hp starter, 400 amp disconnect, includes conduit from boxes to motor, no inlet wire included

120

Slab Dump
(Part of an entirety) 24" belt, 3' x 13'6", electric drive, air cylinder for dump, controls in cab

121

Log Turner and Nose Skids
(Part of an entirety) 36" chain type turner, hydraulic cylinder and drive, 4' x 10' nose skids, controls in cab

122

Sawyer's Cab
(Part of an entirety) 4' x 6' x 75" tall, has AC unit, includes catwalk around cab and steps up to cab, includes no controls

123

Cleereman 3HB Carriage Entirety of Lots 116-122
With 10% raise

124

3 Strand Log Deck with Stop'n'Load
Electric drive with Tulsa Gearbox, hydraulic cylinder on loading arm, 12' x 23'6", includes support steel to ground, air cylinders on log pushers

125

56" Circle Saw
F7 style, good condition

126

56" Circle Saw
F8 style, good condition

127

56" Circle Saw
F7 style, good condition

128

56" Circle Saw
F8 style, good condition

129

56" Circle Saw
F7 style, good condition

130

56" Circle Saw
No bits or shanks, needs repair

131

56" Circle Saw
F7 style, missing some bits and shanks, needs repair

132

56" Circle Saw
F7 style, good condition

133

56" Circle Saw
F8 style, good condition

134

56" Circle Saw
No bits or shanks

135

56" Circle Saw
No bits or shanks

136

56" Circle Saw
F7 style, good condition

137

56" Circle Saw
F7 style, missing a few bits and shanks, good condition

138

Roll Case with Pop-Up Transfers
6 1/2" x 24" rolls, 12-24" spacing, 3' x 52' roll case, electric drive, (3) separate pop-up transfer, (1) 3 strand-3' x 10'6", (1) 3 strand-4' x 10'6", (1) 3 strand-7'6" x 9'6" with 3 arm, cant loading arm

139

Ligna Gang Saw
(1st of an entirety) SN: F162931, does not include feeds or electric drive, 12" x 48" capacity, laser lights, single arbor, set up with (21) 30" carbide tip blades, includes all catwalk around gang saw and infeed rolls, includes shelf of assorted spacers on catwalk, includes support steel to ground, includes control panels by infeed rolls

140

Electric Motors
(Part of an entirety) Used to power lot 139, (2) 250 hp, 1785 rpm, no conduit or electric panels included

141

Motor Starters
(Part of an entirety) Delta C2000 250 hp starter, MED GMC-800 250 hp starter, (2) 400 amp disconnects, includes conduit from panel to motors, no inlet conduit included

142

Ligna Infeed Rolls
(Part of an entirety) SN: F162980, hydraulic drive and cylinders, 8 1/2" x 48" rolls, 42" spacing, 3 strand 75" x 10'6" 2 way transfer, 80" x 14'6" overall, includes support steel to ground

143

Ligna Outfeed Rolls
(Part of an entirety) Hydraulic drive, 8 1/2" x 48" rolls, varied spacing, 5' x 20' includes support steel to ground and catwalk over top of rolls

144

5hp Hydraulic Pack
(Part of an entirety) 18" x 30" x 13" tank, includes pump, valves, and all hydraulic lines to equipment

145

Ligna Gang Saw Entirety of lots 139-144
With 10% raise

145A

Gang Saw Blades
All are 30" with 4 3/4" arbor, (36) freshly sharpened blades, (9) used blades-in good condition, may need to be sharpened, includes 4' x 6' tall blade rack

146

3 Strand Log Deck with Stop'n'Load
Electric drive with Tulsa Gearbox, includes support steel to ground, 8' x 10'6", H78 chain, air cylinder on loading arm

147

Scragg Mill
(1st of an entirety) Electric motors for heads not included, (2) 52" F6 style circle saws, (2) 11" x 5' off bear belts with electric drive, 22" x 40" capacity, hydraulic cylinder on push down roll and chain feed with rollers, 40' long single strand chain feed, includes all support steel to ground

147A

Scragg Operator's Cab
(Part of an entirety) 54" x 5' x 7' tall, includes legs to floor and catwalk steps, window AC unit, includes control panel for Scragg mill

148

Electric Motors
(Part of an entirety) Used on lot 147, (2) 100 h, 1765 rpm, 404T frame, 460V, no electric panels included

149

Motor Starters
(Part of an entirety) (2) 100 hp motor tronics motor starter, Model: VMX-S-160-CB-4, includes 400 amp disconnect box, includes conduit from box to motors, no inlet wire included

150

Hydraulic Pack
(Part of an entirety) HP unknown, 16" x 34" x 14" tank, includes pumps, valves, and all hydraulic lines to equipment

151

Scragg Mill Entirety of Lots 147-150
With 10% raise

152

Belt Conveyor
16" belt, 18" pan, 6" sides, 22" x 40' long, support steel to ground, includes adjustable slide pan, air cylinders on pan

153

Belt Conveyor
16" belt, 18" pan, 6" sides, 22" x 40' long, support steel to ground, includes adjustable slide pan, air cylinders on pan

154

Spiral Roll Case
Electric drive, 6 1/2" x 36" rolls, 16-24" spacing, 45" x 20'6", includes support steel to ground

155

3 Strand Transfer Deck with Stop'n'Load
11' x 25', electric drive, H78 chain, air cylinders on both loading arms, includes support steel to ground

156

Roll Case
28" x 47', electric drive, 6 1/2" x 15" rolls, 28" spacing

157

Roll Case with Transfer
7' x 12', 4 strand transfer, 6 1/2" x 60" rolls, 24" spacing, electric drive

158

4 Strand Transfer
H78 chain with pegs, strands go over gang saw outfeed, electric drive, 11' x 12'

159

3 Strand Transfer Deck
Electric drive, C55D rooftop chain, 9'6" x 14'6", includes support steel to ground

160

Cornell 2 Blade Edger
32" x 8' dead roll infeed, manual blade movement, 5" x 28" capacity, 40 hp electric motor, includes disconnect, 6" x 14' tailing belt outfeed, (2) 14" blades-both moveable

161

Dust Auger
Underneath lot 160, electric drive, 8" auger, 16" x 12'

162

6 Strand Transfer Deck
Electric drive, used for waste under tailing belt, includes slide pan, only has chain on 2 strands, 7' x 15', in roughly a triangle shape

163

Belt Conveyor
22" x 24' incline section, 50' flat section over trimsaw, 15" belt, 18" pan, 6" sides, electric drive

164

Belt Conveyor
22" x 24' incline section, 50' flat section over trimsaw, 15" belt, 18" pan, 6" sides, electric drive

165

Belt Conveyor
18" belt and pan, 6" sides, electric drive, 2' x 42'

166

Roll Case
Electric drive, first 15' is 6 1/2" x 10" spiral rolls with 24" spacing then switches to 6 1/2" x 22" rolls on 24" spacing, 32" x 48' overall

167

Roll Case
3' x 35', 4 strand, 3' x 12' pop-up transfer-missing chain on 1 strand, 6 1/2" x 22" rolls, 24" spacing, includes (2) electric drives

168

4 Strand Transfer Deck
C55D rooftop chain, electric drive, 11'6" x 28', includes support steel to ground

169

Corley 6 Strand Unscrambler
SN: 75-LU-001, H78 chain with pegs, 8' x 16' x 65" tall, electric drive

170

Corley 10 Head Drop Saw Trimmer
2 heads uninstalled, 26" saws, 15 hp electric motor on each head, includes control stand and electric panel with starters, disconnect included, 8' x 30' x 8' tall, 28' waste belt with electric drive

170A

Trim Saw Blades
(12) 26" blades with 1 5/16" arbor, all freshly sharpened-ready to use

171

4 Strand Green Chain
Electric drive, C55D rooftop chain, 10'6" x 53'

172

3 Strand Transfer Deck
H78 chain, electric drive on 1 strand, H78B rooftop chain on 2 strands, 10'6" x 35'

173

Lumber Carts
(3) 90" x 8', straight wheels, heavy duty

174

Lumber Carts
(2) 90" x 8', straight wheels, Heavy duty, (1) 4' x 90" straight wheels, heavy duty

175

Lumber Carts
(4) 90" x 8', straight wheels, heavy duty

176

Lumber Rack
88" x 9'6" x 7' tall, made from 6" x 6" tube steel-1/2" thick

177

Lumber Carts
(1) 52" x 90", needs 2 wheels, (2) 90" x 8', straight wheels, heavy duty

178

Lumber Carts
(3) 90" x 8', straight wheels, heavy duty

179

Lumber Carts
(4) 90" x 8', straight wheels, heavy duty

180

Belt Conveyor
17" belt, 19" pan, 6" sides, electric drive, 2' x 39'

181

Webster Vibrating Conveyor
Electric drive, 24" pan, 10" flared sides, 38" x 60'

182

Webster Vibrating Conveyor
SN: 092512301, Electric drive, 24" pan, 10" flared sides, 38" x 42', includes slide pans

183

Webster Vibrating Conveyor
Electric drive, 18" pan, 6" flared sides, includes fine section, 27" x 30', located under gangsaw

184

Belt Conveyor
18" belt, 20" pan, 8" sides, electric drive, 26" x 9' section with air cylinder for lift, 20' flat section

185

Belt Conveyor
18" belt, 20" pan, 8" sides, electric drive, 26" x 28'

186

Belt Conveyor
19" belt and pan, 8" sides, electric drive, 23" x 42' long, includes slide pans

187

Barn Sweep
Electric drive, 11" paddles, 5' x 80' long

188

Barn Sweep
14 1/2" paddles, electric drive, 44" x 27' flat section, 30' incline section behind husk

189

3 Strand Transfer Deck
10'6" x 35', electric drive, includes shafts and sprockets on both ends, air cylinder on board stop arm, includes support steel to ground

190

3 Strand Transfer Deck
Electric drive, includes shaft shared with roll case, 11' x 29', 3 strand 4' long tipple loading arms with air cylinder

191

3 Strand Transfer Deck
Electric drive, 10'6" x 31', support steel to ground included

192

Salem 7' Line-Bar Resaw
(1st of an entirety) SN: 166285-94, 13" x 7' bandwheels, 1 1/2" mead on top wheel, 10" band, includes power feed rolls, feed is fully hydraulic, main electric drive not included, includes support steel to first cross beam, 10 1/2" x 32" rolls, 28" spacing, hydraulic cylinders on press-in rolls. Nice unit!

193

Electric Motor
(Part of an entirety) 200 hp, 8120C frame, 885 rpm, 440V

194

Benshaw Soft Start
(Part of an entirety) SN: XM20110249-1-1, 200 hp, 480V, 240 amps, includes conduit from panel to motor, no inlet wire included

195

Salem 4 Strand Transfer Deck
(Part of an entirety) Electric drive, 11'6" x 12', does not include shared shafts on either end, includes support steel to first cross beam

196

Salem Infeed Rolls
(Part of an entirety) Electric drive on 4 strand transfer, hydraulic drive on rolls, air cylinders, 8' x 18', 10 1/2" x 36" rolls, 30"-40" spacing, includes shared shafts as marked, includes support steel to 1st cross beam

197

Salem 4 Strand Transfer Deck
(Part of an entirety) Electric drive, air cylinders on (4) cant loading arms, 13' x 15'6", includes shaft shared with lot 196, includes support steel to 1st cross beam

198

Salem 4 Strand 180 Degree Transfer Deck
(Part of an entirety) Electric drive, 12' wide, 19'6" inside to inside measurement, includes support steel to 1st cross beam

199

4 Strand Transfer Deck
(Part of an entirety) Electric drive, 12' x 13', air cylinder on loading arm, H78B rooftop chain, 3' x 19' 4 arm tipple board loading arm, includes support steel to 1st cross beam

200

Salem Outfeed Rolls
(Part of an entirety) 6 1/2" x 54" rolls, 24"-30" spacing, (2) 4 strand 2 way transfer, electric drive on transfers, hydraulic drive on rolls, air cylinders on board stops and pop-ups, 8' x 21', includes support steel to ground

201

Operator's Cab
(Part of an entirety) 5' x 10' x 90" tall, includes catwalk steps, window AC unit, includes all controls in cab, includes control stand in middle of run-around system, includes steel legs to 1st cross beam

202

Allen-Bradley Centerline Motor Control Center
(Part of an entirety) 800 amp horizontal, 300 amp vertical, 15" x 13'6" x 92" tall, includes motor starters on wall as marked

203

Hydraulic Unit
(Part of an entirety) (2) 30 hp motors, 2' x 6' x 20" tank, includes pumps, valves, cooling unit, and all hydraulic lines to equipment

204

Salem Line Bar Resaw and Run-Around System of Lots 192-203
With 10% raise

205

Bands
10" bands, sharpened, ready to use. Total of 13 bands

206

Salem Roll Case with Transfers
Electric drive, air cylinders on board stops, 10 1/2" x 54" rolls, 32" -36" spacing, (2) 4 strand 2 way transfers, 8' x 18', includes support steel to 1st cross beam

207

4 Strand Transfer Deck
11' x 17'6", includes support steel to ground, does not include shaft, shared with lot 200 or electric drive shared with lot 208

208

Salem Roll Case
6 1/2" x 64" rolls, 28" spacing, electric drive, 6' x 28', 4 strand transfer in roll case

209

Barn Sweep
Electric drive, 10 1/2" paddles, 3' x 40' incline section, 30' flat section

210

Gardner Denver Air Compressor
Meter reads: 34840 hours, 75 hp electric motor, includes starter and disconnect, includes oil cooling unit, 56" x 90" x 66" tall overall, includes air line from compressor to dryer

211

Sullair Air Compressor
Model: 20-100L-ACAC, SN: 003-79371, meter reads: 34168 hours, 100 hp electric motor, includes disconnect, oil cooling unit, 62" x 8' x 6' tall, includes air line from compressor to dryer

212

Sullair Air Compressor
Model: 16B-75H-ACAC, SN: 003-66142, meter reads: 14137 hours, 75 hp electric motor, oil cooling unit, 45" x 75" x 5' tall, includes disconnect, includes air line from compressor to dryer

213

Hankinson Refrigerated Air Dryer
Model: 80500, SN: 0311A-3-9604-14, 500 scfm at 100 psig, includes all air line from dryer to equipment, no infeed air line included

214

Sullair Air Compressor
Model: 150-E-40HP, SN: 5116-KLP, meter reads: 17601 hours, 125 max psig, 40 hp electric motor, 34" x 53" x 48" tall, no air line included

215

Comp Air Kellogg Air Compressor
Model: 6030TEL, SN: V9I14542LCR, 30 hp electric motor, 24" x 64" horizontal air tank, no air line included

216

Pneumatic Heatless Regenerative Air Dryer
Model: PH-400, SN: 0402-S140140-043722, 150 psig max pressure, 2 tanks, includes all air line and filters from lots 214 and 215 to dryer and all air line from dryer t equipment

217

Jocar Horizontal Resaw
(1st of an entirety) Model: 1400/200, SN: 272, made in 1998, 27" x 27" infeed capacity, does not include main electric drive, includes 2 control panels, 27 1/2" x 11' chain feed, hydraulic drive on feed, air cylinders on press down rolls, 8" x 56" band wheels, 1 1/4" thickness on wheels, 6 1/2" band, 11' x 13'6" overall, includes support steel to ground, includes guide grinder

218

WEG Electric Motor
(Part of an entirety) 100 hp, 280S/M frame, 1785 rpm

219

Motor Starters
(Part of an entirety) Jocar 460V motor control panel, includes control panel at end of outfeed rolls

220

Ligna Infeed Rolls
(Part of an entirety) SN: F162585, hydraulic drive, air cylinder on tipple arm, 8 1/2" x 30" rolls, 24" spacing, 6' x 14'6", 5 strand skate roll tipple arm-30" long

221

Ligna Outfeed Rolls
(Part of an entirety) SN: F162587, 80" x 19' overall, hydraulic drive, 6 strand-4' x 15' transfer, 6 1/2" x 39" rolls, 30" spacing, 8 strand 18" long skate rolls, includes support steel to ground

222

20hp Hydraulic Pack
(Part of an entirety) 27" x 48" x 14" tank, includes pumps, valves, cooling unit and all hydraulic lines to equipment

222A

6 Strand Transfer Deck
(Part of an entirety) C55D rooftop chain, electric drive, 10'6" x 11', air cylinder on loading arm. Marked as 225

222B

15hp Hydraulic Pack
(Part of an entirety) 24" x 40" x 18" tank, includes pumps, valves, cooling unit, and all hydraulic lines to equipment. Marked as 226

222C

Belt Conveyor
(Part of an entirety) Electric drive, 18" belt, 19" pan, 3" sides, 2' x 38'. Marked as 228

222D

Belt Conveyor
(Part of an entirety) Electric drive, 18" belt and pan, 6" sides, 22" x 8'. Marked as 229

222E

Belt Conveyor
(Part of an entirety) Electric drive, 16" belt, 20" pan, 8" sides, 25" x 25'. Marked as 230

222F

Tipple Arms
(Part of an entirety) (2) 32" x 19' long tipple arms with skate rolls, air cylinders for tip. Marked as 231

222G

Belt Conveyor
(Part of an entirety) Electric drive, 18" belt, 20" pan, 8"-42" sides, 2' x 31". Marked as 232

222H

3 Strand Transfer Deck
(Part of an entirety) Electric drive, 15' x 15'6", steel slats across width of deck. Marked as 233

223

Jocar Resaw Entirety of Lots 217-222H
With 10% raise

224

Bands
(14) 6" bands, sharpened, fits lot 217

227

6 Strand Transfer Deck
H78B rooftop chain, electric drive, 12' x 45', includes support steel to ground and catwalk beside deck

234

6 Strand Transfer Deck
C55D rooftop chain, electric drive, 10'6" x 16'

235

Edmiston 2 Blade Edger
3' x 5' dead roll infeed, control panel, (2) 16" blades-both moveable, hydraulic blade movement, 4" x 30" capacity, 40 hp electric motor, includes disconnect, 6" x 15' tailing belt-hydraulic drive, includes hydraulic tank, laser lights

236

Belt Conveyor
Electric drive, 19" belt, 25" pan, 28" x 16', 3 sides, air cylinder for belt drop

237

6 Strand Green Chain
C55D rooftop chain, electric drive, 10'6" x 40'

238

Lumber Carts
4 carts, 4' x 90", straight wheels, heavy duty

239

Lumber Carts
5 carts, 4' x 90", straight wheels, heavy duty

240

Precision 58" 8 Knife Chipper
(1st of an entirety) SN: C-3232, Size: 58 x 15, bottom discharge, does not include motor, good knives

241

Electric Motor
(Part of an entirety) 150 hp, 900 rpm, 460V, frame-15

242

Motor Starter
(Part of an entirety) Metasol motor starter, 400 amp disconnect box

243

Chain Conveyor
(Part of an entirety) Electric drive, 11" ladderback chain with 18" steel slats, 3' x 24'

244

Precision Chip Shaker
(Part of an entirety) 5' x 10' screen, electric drive, includes all support steel to ground

245

Belt Conveyor
(Part of an entirety) 12" belt, electric drive, 15" x 21'6"

246

Concave Belt Conveyor
(Part of an entirety) Electric drive, 30" cleated belt, 4' x 37', includes catwalk on side of belt

247

Precision Chipper Entirety of Lot 240-246
With 10% raise

248

Webster Vibrating Conveyor
24" pan, 10" flared sides, electric drive, includes fiberglass section and chipper infeed section, does not include metal detector, 37" x 87'

249

MDI Metal Detector
Includes control panel

250

Dust Auger
Electric drive, 8" auger, 15" x 34'

251

Dust Auger
Electric drive, 8" auger, 15" x 40'

252

Motor Starters and Disconnects
Includes all starters and disconnects as marked on wall by Jokar Resaw system, no conduit included

253

Conduit
Includes all conduit from boxes in lot 252 to equipment, no inlet wire included, no 110V wire included

254

Motor Starters and Disconnects
Includes all starters and disconnects as marked on wall facing Scragg mill, no conduit included

255

Conduit
Includes all conduit from all boxes in 254 to equipment, no inlet wire or 110V wire included

256

Motor Starters and Disconnects
Includes all starters and disconnects as marked on both sides of wall towards Head Saw, no conduit included

257

Conduit
Includes all conduit from all boxes in 256 to equipment, no 110V or inlet wire included

258

Mellott Rosserhead Debarker
SN: 91200242, , item # 200, type 10, 2 1/2" x 24" bull wheels, 2 15/16" shafts, aluminum cutting head, 30 hp electric motor on head, hydraulic cylinders on log kickers, 90" x 33' overall, 54" x 5' x 90" tall cab with all controls, no cable on drum, flat track, 12" x 32" x 32" hydraulic tank, uninstalled

260

McDonough 7' Right Hand Bandmill
(1st of an entirety) Air strain (SN: 84MA-164) 13" face, 1 1/8" thickness, runs 10" blades, includes 5' off bearer belt. This is a very nice unit! Currently uninstalled, has been sitting inside out of the rain and weather since it was purchased back in 2020.

261

Toshiba Electric Motor
(Part of an entirety) 250 hp, N587UZ frame, 460V, 1185 rpm, uninstalled

262

McDonough 7' Head Rig Entirety of Lots 260-261
With 10% raise

275

Volvo L120E Wheel Loader
SN:L120EV64158.
Meter reads: 26,636 hours.
Engine: 6 cylinder.
Fuel type: Diesel.
ROPS: Fully enclosed.
3rd Valve: Yes.
Center to center of pins: 25 1/2".
Tire Size: 23.5R25.
Attachments: None included.
Heater: Yes.
A/C: Yes.
Quick Attach: Yes.

Features and Notes: Runs and operates as it should.

275A

Volvo Quick Attach Bucket
Model: 92687, SN: 04-01-04C, 5' x 9' x 5' tall

290

2000 Timberjack 608L Truck Feller Buncher
SN: 10BA1147, meter reads: 7668 hours, Gilbert rotating cutting head, 8.3L Cummins diesel engine, runs strong, 24" tracks, undercarriage in great condition, fully enclosed cab with radio, heat, and pilot joystick controls. Runs and operates great.

320

2001 Mack CL713 Log Truck
VIN #: 1M2AD38C21M011905.
Mileage: 294,811.
Engine Type: Mack E7-400 (SN: 1C2147).
Fuel Type: Diesel.
Horsepower: 400HP.
Transmission: 9 speed Eaton.
Log loader: None.
Suspension: Air and Spring Leaf.
GVWR: Approx. 65,000 lbs.
Heat/AC: Yes.
Double frame: Yes.
Tire size: (rear 2 axles) 11R22.5, (lift axles) 255/70R22.5, (steer axle) 425/65R22.5.

Features and Notes: Quad axle, 24' log bed, 7' wide x 90" tall bunks. Had engine fully rebuilt by Mack earlier this year, less than 1000 miles on new engine. Starts and runs great.

321

2001 Mack CL713 Log Truck
VIN #: 1M2AD38C81M011858.
Mileage: 292,752.
Engine Type: Mack E7-400 (SN: 1A0314).
Fuel Type: Diesel.
Horsepower: 400HP.
Transmission: 9 speed Eaton.
Log loader: None.
Suspension: Air and Spring Leaf.
GVWR: 64,000 lbs.
Heat/AC: Yes.
Double frame: Yes.
Tire size: (rear axles) 11R22.5, (lift axles) 255/70R22.5, (steer axle) 425/65R22.5.

Features and Notes: Quad axle, 27' log bed, 90" x 90" log bunks

Photo Gallery

Share This Listing

Other Sales by
This Company

May 17
Millersburg, OH

May 17
na, IN

May 17
na, IN

May 22
West Liberty, KY

May 24
Marion, MI

View all listings

Pine Log Company, Inc

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704

118 Traditional Living Road
State Road, NC 28676

Thursday Dec 28, 2023 Completed

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.

1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
2. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
3. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
4. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
5. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Cash payments totaling Ten Thousand Dollars ($10,000) or more will not be accepted. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.

Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyer’s account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Insurance. Any work performed by Purchaser(s) or Purchaser Representative (including sub-contractors) shall be insured and provide proof of coverage against all claims for injuries against persons or damages to property which may arise from or in connection with the removal of items or equipment. Insurance coverage requirements are as follows: General Liability $1,000,000/$2,000,000 and Worker’s Compensation $1,000,000 or as required by State Law. Seller shall be listed as additionally insured, if required.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.

Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Details
This location only, this sale does not disrupt the succesful ongoing operations of any other Randy D Miller locations. 00 Information Lot Type of Auction: Sawmill/Rolling Stock Highlight Pieces: 7' Mcdonough headrig, 7' Salem resaw system, 2022 Volvo L120 wheel loader, late model rolling stock! Auction Agent: Zach Kittrell 931-224-0699 01 Preview & Inspection Buyers are responsible to do their own inspection to determine the condition of the items they purchase. Inspections times are available as follows: December 27, 2023 9am-4pm. All other previews must be by appointment only. Contact: 931-698-7058 for appointment information. Location of Auction: 118 Traditional Living Road, State Road, NC 28676 02 Loadout Information Equipment must be removed by April 1, 2024. 03 Payment Information Payment terms: 10% Onsite and 13% Online Buyer's Premium in affect for all purchases. Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. 04 CAT 390F L Hydraulic Excavator 1:50 Scale Replica - Die Cast Metal Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 98 Heavy Equipment Key Set 36 Keys Shipping available for $20 99 Manual Sealless Steel Strapping Tool Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30 100 Barko 160D Stationary Knuckleboom SN: 22709, meter reads: 5181 hours, 460V, 3 ph, 48" continuous grapple, enclosed cab with window AC unit, electric/hydraulic drive, includes support steel to concrete 101 3 Strand Log Deck Electric drive, 10'6" x 13'6", includes support steel to ground 102 Morbark Log Trough SN: 8552, 4' x 20', 12" ladderback chain, hydraulic drive, includes support steel to ground 103 Hydraulic Pack 24" x 32" x 13" tank, hp on motor unknown, includes all pumps, valves, and all hydraulic lines to equipment 104 Belt Conveyor Electric drive, includes support steel to ground, 36" belt, 5' x 15' 105 MDI TWA-2000 Metal Detector Includes control panel mounted to operator's cab 106 Log Trough 12" ladderback chain, 4' x 26', hydraulic cylinders on log kickers, electric drive, includes support steel to ground 107 10hp Hydraulic Pack 18" x 24" x 18" tank, includes pump, valves, and all hydraulic lines to equipment 108 Morbark Debarker (1st of an entirety) Does not include main electric drive or troughs, hydraulic cylinders and pumps on moving heads, includes hydraulic pack with valve station and all hydraulic lines to debarker entirety 109 Electric Motor (Part of an entirety) 100 hp, 1770 rpm, 3 ph 110 Morbark Infeed Log Trough (Part of an entirety) Hydraulic drive, 13" belt chain, 54" x 20', includes support steel to ground 111 Morbark Outfeed Log Trough (Part of an entirety) 12" ladderback chain, hydraulic drive, hydraulic cylinders on dual sided log kickers, 54" x 28', includes support steel to ground 112 Barn Sweep (Part of an entirety) 4' x 28' flat section, 22' incline section, electric drive, 15" paddles, includes slide pan 113 Morbark Operator's Cab (Part of an entirety) 54" x 6' x 7' tall, includes legs to ground and catwalk and steps around cab, has window AC unit, includes all controls in cab 114 Morbark Debarker Entirety of Lots 108-113 With 10% raise 115 4 Strand Log Deck with Stop'n'Load Electric drive, includes support steel to ground, 13'6" x 19', hydraulic cylinder on loading arm, H78 chain, missing chain on 1 strand 116 Cleereman 38 3HB Carriage and Track (1st of an entirety) SN: 38-297-88, 1st HB to 2nd HB-78", 2nd HB to 3rd HB-54", 7' x 15', 3 axle, pantograph, computerized setworks and controls in cab, air dogs, air over 110 power, 3/4" dogs, track is 50" center to center, 60' long track, includes all support steel to ground, pulleys in track not included 117 Tyrone Berry Carriage Drive (Part of an entirety) Model: SMA-225, SN: G-1046, Roll of 3/4" steel cable, pump, and pulleys, mounted on track, 60 hp electric motor, 26" x 31" x 15" tank, hydraulic pumps and valves, cooling unit, includes all hydraulic lines to equipment 118 56" Husk with Top Saw (Part of an entirety) 56" F7 style circle saw-in good condition, 36" F8 style top saw, 40 hp electric motor for top saw, main electric drive for husk not included, 2' x 6' off bear, belt runs off slab dump motor, includes hydraulic tank with pump that runs off mandrel shaft 119 Electric Motor (Part of an entirety) 150 hp, 1780 rpm, 444T frame, 480V 119A Motor Starter (Part of an entirety) 150 hp starter, 400 amp disconnect, includes conduit from boxes to motor, no inlet wire included 120 Slab Dump (Part of an entirety) 24" belt, 3' x 13'6", electric drive, air cylinder for dump, controls in cab 121 Log Turner and Nose Skids (Part of an entirety) 36" chain type turner, hydraulic cylinder and drive, 4' x 10' nose skids, controls in cab 122 Sawyer's Cab (Part of an entirety) 4' x 6' x 75" tall, has AC unit, includes catwalk around cab and steps up to cab, includes no controls 123 Cleereman 3HB Carriage Entirety of Lots 116-122 With 10% raise 124 3 Strand Log Deck with Stop'n'Load Electric drive with Tulsa Gearbox, hydraulic cylinder on loading arm, 12' x 23'6", includes support steel to ground, air cylinders on log pushers 125 56" Circle Saw F7 style, good condition 126 56" Circle Saw F8 style, good condition 127 56" Circle Saw F7 style, good condition 128 56" Circle Saw F8 style, good condition 129 56" Circle Saw F7 style, good condition 130 56" Circle Saw No bits or shanks, needs repair 131 56" Circle Saw F7 style, missing some bits and shanks, needs repair 132 56" Circle Saw F7 style, good condition 133 56" Circle Saw F8 style, good condition 134 56" Circle Saw No bits or shanks 135 56" Circle Saw No bits or shanks 136 56" Circle Saw F7 style, good condition 137 56" Circle Saw F7 style, missing a few bits and shanks, good condition 138 Roll Case with Pop-Up Transfers 6 1/2" x 24" rolls, 12-24" spacing, 3' x 52' roll case, electric drive, (3) separate pop-up transfer, (1) 3 strand-3' x 10'6", (1) 3 strand-4' x 10'6", (1) 3 strand-7'6" x 9'6" with 3 arm, cant loading arm 139 Ligna Gang Saw (1st of an entirety) SN: F162931, does not include feeds or electric drive, 12" x 48" capacity, laser lights, single arbor, set up with (21) 30" carbide tip blades, includes all catwalk around gang saw and infeed rolls, includes shelf of assorted spacers on catwalk, includes support steel to ground, includes control panels by infeed rolls 140 Electric Motors (Part of an entirety) Used to power lot 139, (2) 250 hp, 1785 rpm, no conduit or electric panels included 141 Motor Starters (Part of an entirety) Delta C2000 250 hp starter, MED GMC-800 250 hp starter, (2) 400 amp disconnects, includes conduit from panel to motors, no inlet conduit included 142 Ligna Infeed Rolls (Part of an entirety) SN: F162980, hydraulic drive and cylinders, 8 1/2" x 48" rolls, 42" spacing, 3 strand 75" x 10'6" 2 way transfer, 80" x 14'6" overall, includes support steel to ground 143 Ligna Outfeed Rolls (Part of an entirety) Hydraulic drive, 8 1/2" x 48" rolls, varied spacing, 5' x 20' includes support steel to ground and catwalk over top of rolls 144 5hp Hydraulic Pack (Part of an entirety) 18" x 30" x 13" tank, includes pump, valves, and all hydraulic lines to equipment 145 Ligna Gang Saw Entirety of lots 139-144 With 10% raise 145A Gang Saw Blades All are 30" with 4 3/4" arbor, (36) freshly sharpened blades, (9) used blades-in good condition, may need to be sharpened, includes 4' x 6' tall blade rack 146 3 Strand Log Deck with Stop'n'Load Electric drive with Tulsa Gearbox, includes support steel to ground, 8' x 10'6", H78 chain, air cylinder on loading arm 147 Scragg Mill (1st of an entirety) Electric motors for heads not included, (2) 52" F6 style circle saws, (2) 11" x 5' off bear belts with electric drive, 22" x 40" capacity, hydraulic cylinder on push down roll and chain feed with rollers, 40' long single strand chain feed, includes all support steel to ground 147A Scragg Operator's Cab (Part of an entirety) 54" x 5' x 7' tall, includes legs to floor and catwalk steps, window AC unit, includes control panel for Scragg mill 148 Electric Motors (Part of an entirety) Used on lot 147, (2) 100 h, 1765 rpm, 404T frame, 460V, no electric panels included 149 Motor Starters (Part of an entirety) (2) 100 hp motor tronics motor starter, Model: VMX-S-160-CB-4, includes 400 amp disconnect box, includes conduit from box to motors, no inlet wire included 150 Hydraulic Pack (Part of an entirety) HP unknown, 16" x 34" x 14" tank, includes pumps, valves, and all hydraulic lines to equipment 151 Scragg Mill Entirety of Lots 147-150 With 10% raise 152 Belt Conveyor 16" belt, 18" pan, 6" sides, 22" x 40' long, support steel to ground, includes adjustable slide pan, air cylinders on pan 153 Belt Conveyor 16" belt, 18" pan, 6" sides, 22" x 40' long, support steel to ground, includes adjustable slide pan, air cylinders on pan 154 Spiral Roll Case Electric drive, 6 1/2" x 36" rolls, 16-24" spacing, 45" x 20'6", includes support steel to ground 155 3 Strand Transfer Deck with Stop'n'Load 11' x 25', electric drive, H78 chain, air cylinders on both loading arms, includes support steel to ground 156 Roll Case 28" x 47', electric drive, 6 1/2" x 15" rolls, 28" spacing 157 Roll Case with Transfer 7' x 12', 4 strand transfer, 6 1/2" x 60" rolls, 24" spacing, electric drive 158 4 Strand Transfer H78 chain with pegs, strands go over gang saw outfeed, electric drive, 11' x 12' 159 3 Strand Transfer Deck Electric drive, C55D rooftop chain, 9'6" x 14'6", includes support steel to ground 160 Cornell 2 Blade Edger 32" x 8' dead roll infeed, manual blade movement, 5" x 28" capacity, 40 hp electric motor, includes disconnect, 6" x 14' tailing belt outfeed, (2) 14" blades-both moveable 161 Dust Auger Underneath lot 160, electric drive, 8" auger, 16" x 12' 162 6 Strand Transfer Deck Electric drive, used for waste under tailing belt, includes slide pan, only has chain on 2 strands, 7' x 15', in roughly a triangle shape 163 Belt Conveyor 22" x 24' incline section, 50' flat section over trimsaw, 15" belt, 18" pan, 6" sides, electric drive 164 Belt Conveyor 22" x 24' incline section, 50' flat section over trimsaw, 15" belt, 18" pan, 6" sides, electric drive 165 Belt Conveyor 18" belt and pan, 6" sides, electric drive, 2' x 42' 166 Roll Case Electric drive, first 15' is 6 1/2" x 10" spiral rolls with 24" spacing then switches to 6 1/2" x 22" rolls on 24" spacing, 32" x 48' overall 167 Roll Case 3' x 35', 4 strand, 3' x 12' pop-up transfer-missing chain on 1 strand, 6 1/2" x 22" rolls, 24" spacing, includes (2) electric drives 168 4 Strand Transfer Deck C55D rooftop chain, electric drive, 11'6" x 28', includes support steel to ground 169 Corley 6 Strand Unscrambler SN: 75-LU-001, H78 chain with pegs, 8' x 16' x 65" tall, electric drive 170 Corley 10 Head Drop Saw Trimmer 2 heads uninstalled, 26" saws, 15 hp electric motor on each head, includes control stand and electric panel with starters, disconnect included, 8' x 30' x 8' tall, 28' waste belt with electric drive 170A Trim Saw Blades (12) 26" blades with 1 5/16" arbor, all freshly sharpened-ready to use 171 4 Strand Green Chain Electric drive, C55D rooftop chain, 10'6" x 53' 172 3 Strand Transfer Deck H78 chain, electric drive on 1 strand, H78B rooftop chain on 2 strands, 10'6" x 35' 173 Lumber Carts (3) 90" x 8', straight wheels, heavy duty 174 Lumber Carts (2) 90" x 8', straight wheels, Heavy duty, (1) 4' x 90" straight wheels, heavy duty 175 Lumber Carts (4) 90" x 8', straight wheels, heavy duty 176 Lumber Rack 88" x 9'6" x 7' tall, made from 6" x 6" tube steel-1/2" thick 177 Lumber Carts (1) 52" x 90", needs 2 wheels, (2) 90" x 8', straight wheels, heavy duty 178 Lumber Carts (3) 90" x 8', straight wheels, heavy duty 179 Lumber Carts (4) 90" x 8', straight wheels, heavy duty 180 Belt Conveyor 17" belt, 19" pan, 6" sides, electric drive, 2' x 39' 181 Webster Vibrating Conveyor Electric drive, 24" pan, 10" flared sides, 38" x 60' 182 Webster Vibrating Conveyor SN: 092512301, Electric drive, 24" pan, 10" flared sides, 38" x 42', includes slide pans 183 Webster Vibrating Conveyor Electric drive, 18" pan, 6" flared sides, includes fine section, 27" x 30', located under gangsaw 184 Belt Conveyor 18" belt, 20" pan, 8" sides, electric drive, 26" x 9' section with air cylinder for lift, 20' flat section 185 Belt Conveyor 18" belt, 20" pan, 8" sides, electric drive, 26" x 28' 186 Belt Conveyor 19" belt and pan, 8" sides, electric drive, 23" x 42' long, includes slide pans 187 Barn Sweep Electric drive, 11" paddles, 5' x 80' long 188 Barn Sweep 14 1/2" paddles, electric drive, 44" x 27' flat section, 30' incline section behind husk 189 3 Strand Transfer Deck 10'6" x 35', electric drive, includes shafts and sprockets on both ends, air cylinder on board stop arm, includes support steel to ground 190 3 Strand Transfer Deck Electric drive, includes shaft shared with roll case, 11' x 29', 3 strand 4' long tipple loading arms with air cylinder 191 3 Strand Transfer Deck Electric drive, 10'6" x 31', support steel to ground included 192 Salem 7' Line-Bar Resaw (1st of an entirety) SN: 166285-94, 13" x 7' bandwheels, 1 1/2" mead on top wheel, 10" band, includes power feed rolls, feed is fully hydraulic, main electric drive not included, includes support steel to first cross beam, 10 1/2" x 32" rolls, 28" spacing, hydraulic cylinders on press-in rolls. Nice unit! 193 Electric Motor (Part of an entirety) 200 hp, 8120C frame, 885 rpm, 440V 194 Benshaw Soft Start (Part of an entirety) SN: XM20110249-1-1, 200 hp, 480V, 240 amps, includes conduit from panel to motor, no inlet wire included 195 Salem 4 Strand Transfer Deck (Part of an entirety) Electric drive, 11'6" x 12', does not include shared shafts on either end, includes support steel to first cross beam 196 Salem Infeed Rolls (Part of an entirety) Electric drive on 4 strand transfer, hydraulic drive on rolls, air cylinders, 8' x 18', 10 1/2" x 36" rolls, 30"-40" spacing, includes shared shafts as marked, includes support steel to 1st cross beam 197 Salem 4 Strand Transfer Deck (Part of an entirety) Electric drive, air cylinders on (4) cant loading arms, 13' x 15'6", includes shaft shared with lot 196, includes support steel to 1st cross beam 198 Salem 4 Strand 180 Degree Transfer Deck (Part of an entirety) Electric drive, 12' wide, 19'6" inside to inside measurement, includes support steel to 1st cross beam 199 4 Strand Transfer Deck (Part of an entirety) Electric drive, 12' x 13', air cylinder on loading arm, H78B rooftop chain, 3' x 19' 4 arm tipple board loading arm, includes support steel to 1st cross beam 200 Salem Outfeed Rolls (Part of an entirety) 6 1/2" x 54" rolls, 24"-30" spacing, (2) 4 strand 2 way transfer, electric drive on transfers, hydraulic drive on rolls, air cylinders on board stops and pop-ups, 8' x 21', includes support steel to ground 201 Operator's Cab (Part of an entirety) 5' x 10' x 90" tall, includes catwalk steps, window AC unit, includes all controls in cab, includes control stand in middle of run-around system, includes steel legs to 1st cross beam 202 Allen-Bradley Centerline Motor Control Center (Part of an entirety) 800 amp horizontal, 300 amp vertical, 15" x 13'6" x 92" tall, includes motor starters on wall as marked 203 Hydraulic Unit (Part of an entirety) (2) 30 hp motors, 2' x 6' x 20" tank, includes pumps, valves, cooling unit, and all hydraulic lines to equipment 204 Salem Line Bar Resaw and Run-Around System of Lots 192-203 With 10% raise 205 Bands 10" bands, sharpened, ready to use. Total of 13 bands 206 Salem Roll Case with Transfers Electric drive, air cylinders on board stops, 10 1/2" x 54" rolls, 32" -36" spacing, (2) 4 strand 2 way transfers, 8' x 18', includes support steel to 1st cross beam 207 4 Strand Transfer Deck 11' x 17'6", includes support steel to ground, does not include shaft, shared with lot 200 or electric drive shared with lot 208 208 Salem Roll Case 6 1/2" x 64" rolls, 28" spacing, electric drive, 6' x 28', 4 strand transfer in roll case 209 Barn Sweep Electric drive, 10 1/2" paddles, 3' x 40' incline section, 30' flat section 210 Gardner Denver Air Compressor Meter reads: 34840 hours, 75 hp electric motor, includes starter and disconnect, includes oil cooling unit, 56" x 90" x 66" tall overall, includes air line from compressor to dryer 211 Sullair Air Compressor Model: 20-100L-ACAC, SN: 003-79371, meter reads: 34168 hours, 100 hp electric motor, includes disconnect, oil cooling unit, 62" x 8' x 6' tall, includes air line from compressor to dryer 212 Sullair Air Compressor Model: 16B-75H-ACAC, SN: 003-66142, meter reads: 14137 hours, 75 hp electric motor, oil cooling unit, 45" x 75" x 5' tall, includes disconnect, includes air line from compressor to dryer 213 Hankinson Refrigerated Air Dryer Model: 80500, SN: 0311A-3-9604-14, 500 scfm at 100 psig, includes all air line from dryer to equipment, no infeed air line included 214 Sullair Air Compressor Model: 150-E-40HP, SN: 5116-KLP, meter reads: 17601 hours, 125 max psig, 40 hp electric motor, 34" x 53" x 48" tall, no air line included 215 Comp Air Kellogg Air Compressor Model: 6030TEL, SN: V9I14542LCR, 30 hp electric motor, 24" x 64" horizontal air tank, no air line included 216 Pneumatic Heatless Regenerative Air Dryer Model: PH-400, SN: 0402-S140140-043722, 150 psig max pressure, 2 tanks, includes all air line and filters from lots 214 and 215 to dryer and all air line from dryer t equipment 217 Jocar Horizontal Resaw (1st of an entirety) Model: 1400/200, SN: 272, made in 1998, 27" x 27" infeed capacity, does not include main electric drive, includes 2 control panels, 27 1/2" x 11' chain feed, hydraulic drive on feed, air cylinders on press down rolls, 8" x 56" band wheels, 1 1/4" thickness on wheels, 6 1/2" band, 11' x 13'6" overall, includes support steel to ground, includes guide grinder 218 WEG Electric Motor (Part of an entirety) 100 hp, 280S/M frame, 1785 rpm 219 Motor Starters (Part of an entirety) Jocar 460V motor control panel, includes control panel at end of outfeed rolls 220 Ligna Infeed Rolls (Part of an entirety) SN: F162585, hydraulic drive, air cylinder on tipple arm, 8 1/2" x 30" rolls, 24" spacing, 6' x 14'6", 5 strand skate roll tipple arm-30" long 221 Ligna Outfeed Rolls (Part of an entirety) SN: F162587, 80" x 19' overall, hydraulic drive, 6 strand-4' x 15' transfer, 6 1/2" x 39" rolls, 30" spacing, 8 strand 18" long skate rolls, includes support steel to ground 222 20hp Hydraulic Pack (Part of an entirety) 27" x 48" x 14" tank, includes pumps, valves, cooling unit and all hydraulic lines to equipment 222A 6 Strand Transfer Deck (Part of an entirety) C55D rooftop chain, electric drive, 10'6" x 11', air cylinder on loading arm. Marked as 225 222B 15hp Hydraulic Pack (Part of an entirety) 24" x 40" x 18" tank, includes pumps, valves, cooling unit, and all hydraulic lines to equipment. Marked as 226 222C Belt Conveyor (Part of an entirety) Electric drive, 18" belt, 19" pan, 3" sides, 2' x 38'. Marked as 228 222D Belt Conveyor (Part of an entirety) Electric drive, 18" belt and pan, 6" sides, 22" x 8'. Marked as 229 222E Belt Conveyor (Part of an entirety) Electric drive, 16" belt, 20" pan, 8" sides, 25" x 25'. Marked as 230 222F Tipple Arms (Part of an entirety) (2) 32" x 19' long tipple arms with skate rolls, air cylinders for tip. Marked as 231 222G Belt Conveyor (Part of an entirety) Electric drive, 18" belt, 20" pan, 8"-42" sides, 2' x 31". Marked as 232 222H 3 Strand Transfer Deck (Part of an entirety) Electric drive, 15' x 15'6", steel slats across width of deck. Marked as 233 223 Jocar Resaw Entirety of Lots 217-222H With 10% raise 224 Bands (14) 6" bands, sharpened, fits lot 217 227 6 Strand Transfer Deck H78B rooftop chain, electric drive, 12' x 45', includes support steel to ground and catwalk beside deck 234 6 Strand Transfer Deck C55D rooftop chain, electric drive, 10'6" x 16' 235 Edmiston 2 Blade Edger 3' x 5' dead roll infeed, control panel, (2) 16" blades-both moveable, hydraulic blade movement, 4" x 30" capacity, 40 hp electric motor, includes disconnect, 6" x 15' tailing belt-hydraulic drive, includes hydraulic tank, laser lights 236 Belt Conveyor Electric drive, 19" belt, 25" pan, 28" x 16', 3 sides, air cylinder for belt drop 237 6 Strand Green Chain C55D rooftop chain, electric drive, 10'6" x 40' 238 Lumber Carts 4 carts, 4' x 90", straight wheels, heavy duty 239 Lumber Carts 5 carts, 4' x 90", straight wheels, heavy duty 240 Precision 58" 8 Knife Chipper (1st of an entirety) SN: C-3232, Size: 58 x 15, bottom discharge, does not include motor, good knives 241 Electric Motor (Part of an entirety) 150 hp, 900 rpm, 460V, frame-15 242 Motor Starter (Part of an entirety) Metasol motor starter, 400 amp disconnect box 243 Chain Conveyor (Part of an entirety) Electric drive, 11" ladderback chain with 18" steel slats, 3' x 24' 244 Precision Chip Shaker (Part of an entirety) 5' x 10' screen, electric drive, includes all support steel to ground 245 Belt Conveyor (Part of an entirety) 12" belt, electric drive, 15" x 21'6" 246 Concave Belt Conveyor (Part of an entirety) Electric drive, 30" cleated belt, 4' x 37', includes catwalk on side of belt 247 Precision Chipper Entirety of Lot 240-246 With 10% raise 248 Webster Vibrating Conveyor 24" pan, 10" flared sides, electric drive, includes fiberglass section and chipper infeed section, does not include metal detector, 37" x 87' 249 MDI Metal Detector Includes control panel 250 Dust Auger Electric drive, 8" auger, 15" x 34' 251 Dust Auger Electric drive, 8" auger, 15" x 40' 252 Motor Starters and Disconnects Includes all starters and disconnects as marked on wall by Jokar Resaw system, no conduit included 253 Conduit Includes all conduit from boxes in lot 252 to equipment, no inlet wire included, no 110V wire included 254 Motor Starters and Disconnects Includes all starters and disconnects as marked on wall facing Scragg mill, no conduit included 255 Conduit Includes all conduit from all boxes in 254 to equipment, no inlet wire or 110V wire included 256 Motor Starters and Disconnects Includes all starters and disconnects as marked on both sides of wall towards Head Saw, no conduit included 257 Conduit Includes all conduit from all boxes in 256 to equipment, no 110V or inlet wire included 258 Mellott Rosserhead Debarker SN: 91200242, , item # 200, type 10, 2 1/2" x 24" bull wheels, 2 15/16" shafts, aluminum cutting head, 30 hp electric motor on head, hydraulic cylinders on log kickers, 90" x 33' overall, 54" x 5' x 90" tall cab with all controls, no cable on drum, flat track, 12" x 32" x 32" hydraulic tank, uninstalled 260 McDonough 7' Right Hand Bandmill (1st of an entirety) Air strain (SN: 84MA-164) 13" face, 1 1/8" thickness, runs 10" blades, includes 5' off bearer belt. This is a very nice unit! Currently uninstalled, has been sitting inside out of the rain and weather since it was purchased back in 2020. 261 Toshiba Electric Motor (Part of an entirety) 250 hp, N587UZ frame, 460V, 1185 rpm, uninstalled 262 McDonough 7' Head Rig Entirety of Lots 260-261 With 10% raise 275 Volvo L120E Wheel Loader SN:L120EV64158. Meter reads: 26,636 hours. Engine: 6 cylinder. Fuel type: Diesel. ROPS: Fully enclosed. 3rd Valve: Yes. Center to center of pins: 25 1/2". Tire Size: 23.5R25. Attachments: None included. Heater: Yes. A/C: Yes. Quick Attach: Yes. Features and Notes: Runs and operates as it should. 275A Volvo Quick Attach Bucket Model: 92687, SN: 04-01-04C, 5' x 9' x 5' tall 290 2000 Timberjack 608L Truck Feller Buncher SN: 10BA1147, meter reads: 7668 hours, Gilbert rotating cutting head, 8.3L Cummins diesel engine, runs strong, 24" tracks, undercarriage in great condition, fully enclosed cab with radio, heat, and pilot joystick controls. Runs and operates great. 320 2001 Mack CL713 Log Truck VIN #: 1M2AD38C21M011905. Mileage: 294,811. Engine Type: Mack E7-400 (SN: 1C2147). Fuel Type: Diesel. Horsepower: 400HP. Transmission: 9 speed Eaton. Log loader: None. Suspension: Air and Spring Leaf. GVWR: Approx. 65,000 lbs. Heat/AC: Yes. Double frame: Yes. Tire size: (rear 2 axles) 11R22.5, (lift axles) 255/70R22.5, (steer axle) 425/65R22.5. Features and Notes: Quad axle, 24' log bed, 7' wide x 90" tall bunks. Had engine fully rebuilt by Mack earlier this year, less than 1000 miles on new engine. Starts and runs great. 321 2001 Mack CL713 Log Truck VIN #: 1M2AD38C81M011858. Mileage: 292,752. Engine Type: Mack E7-400 (SN: 1A0314). Fuel Type: Diesel. Horsepower: 400HP. Transmission: 9 speed Eaton. Log loader: None. Suspension: Air and Spring Leaf. GVWR: 64,000 lbs. Heat/AC: Yes. Double frame: Yes. Tire size: (rear axles) 11R22.5, (lift axles) 255/70R22.5, (steer axle) 425/65R22.5. Features and Notes: Quad axle, 27' log bed, 90" x 90" log bunks

Close X

Gallery Images Loading, Please Wait...

Close X

Save this sale to your Saved Sales list!

Your Saved Sales list is an easy way to return to sale listings which are of interest to you.

Login

Username:

Password:

Sign Up

FREE EMAIL NOTIFICATIONS
auction listings delivered to your inbox

Close X

Sign Up

FREE EMAIL NOTIFICATIONS
auction listings delivered to your inbox

Login

Username:

Password:

Return

Pine Log Company, Inc

Live Auction

View Gallery (176)

Auction Date(s)

Thursday Dec 28, 2023 Completed

Auction Location

State Road, NC 28676

View Map

Company

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Website: brightstarauctions.com

Listing Terms and Conditions

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.

1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
2. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
3. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
4. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
5. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Cash payments totaling Ten Thousand Dollars ($10,000) or more will not be accepted. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.

Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyer’s account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Insurance. Any work performed by Purchaser(s) or Purchaser Representative (including sub-contractors) shall be insured and provide proof of coverage against all claims for injuries against persons or damages to property which may arise from or in connection with the removal of items or equipment. Insurance coverage requirements are as follows: General Liability $1,000,000/$2,000,000 and Worker’s Compensation $1,000,000 or as required by State Law. Seller shall be listed as additionally insured, if required.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.

Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

This location only, this sale does not disrupt the succesful ongoing operations of any other Randy D Miller locations.

Loadout Information
Equipment must be removed by April 1, 2024.

Heavy Equipment Key Set 36 Keys
Shipping available for $20

Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

100

101

3 Strand Log Deck
Electric drive, 10'6" x 13'6", includes support steel to ground

102

Morbark Log Trough
SN: 8552, 4' x 20', 12" ladderback chain, hydraulic drive, includes support steel to ground

103

Hydraulic Pack
24" x 32" x 13" tank, hp on motor unknown, includes all pumps, valves, and all hydraulic lines to equipment

104

Belt Conveyor
Electric drive, includes support steel to ground, 36" belt, 5' x 15'

105

MDI TWA-2000 Metal Detector
Includes control panel mounted to operator's cab

106

Log Trough
12" ladderback chain, 4' x 26', hydraulic cylinders on log kickers, electric drive, includes support steel to ground

107

10hp Hydraulic Pack
18" x 24" x 18" tank, includes pump, valves, and all hydraulic lines to equipment

108

109

Electric Motor
(Part of an entirety) 100 hp, 1770 rpm, 3 ph

110

Morbark Infeed Log Trough
(Part of an entirety) Hydraulic drive, 13" belt chain, 54" x 20', includes support steel to ground

111

Morbark Outfeed Log Trough
(Part of an entirety) 12" ladderback chain, hydraulic drive, hydraulic cylinders on dual sided log kickers, 54" x 28', includes support steel to ground

112

Barn Sweep
(Part of an entirety) 4' x 28' flat section, 22' incline section, electric drive, 15" paddles, includes slide pan

113

Morbark Operator's Cab
(Part of an entirety) 54" x 6' x 7' tall, includes legs to ground and catwalk and steps around cab, has window AC unit, includes all controls in cab

114

Morbark Debarker Entirety of Lots 108-113
With 10% raise

115

4 Strand Log Deck with Stop'n'Load
Electric drive, includes support steel to ground, 13'6" x 19', hydraulic cylinder on loading arm, H78 chain, missing chain on 1 strand

116

117

118

119

Electric Motor
(Part of an entirety) 150 hp, 1780 rpm, 444T frame, 480V

119A

Motor Starter
(Part of an entirety) 150 hp starter, 400 amp disconnect, includes conduit from boxes to motor, no inlet wire included

120

Slab Dump
(Part of an entirety) 24" belt, 3' x 13'6", electric drive, air cylinder for dump, controls in cab

121

Log Turner and Nose Skids
(Part of an entirety) 36" chain type turner, hydraulic cylinder and drive, 4' x 10' nose skids, controls in cab

122

Sawyer's Cab
(Part of an entirety) 4' x 6' x 75" tall, has AC unit, includes catwalk around cab and steps up to cab, includes no controls

123

Cleereman 3HB Carriage Entirety of Lots 116-122
With 10% raise

124

3 Strand Log Deck with Stop'n'Load
Electric drive with Tulsa Gearbox, hydraulic cylinder on loading arm, 12' x 23'6", includes support steel to ground, air cylinders on log pushers

125

56" Circle Saw
F7 style, good condition

126

56" Circle Saw
F8 style, good condition

127

56" Circle Saw
F7 style, good condition

128

56" Circle Saw
F8 style, good condition

129

56" Circle Saw
F7 style, good condition

130

56" Circle Saw
No bits or shanks, needs repair

131

56" Circle Saw
F7 style, missing some bits and shanks, needs repair

132

56" Circle Saw
F7 style, good condition

133

56" Circle Saw
F8 style, good condition

134

56" Circle Saw
No bits or shanks

135

56" Circle Saw
No bits or shanks

136

56" Circle Saw
F7 style, good condition

137

56" Circle Saw
F7 style, missing a few bits and shanks, good condition

138

139

140

Electric Motors
(Part of an entirety) Used to power lot 139, (2) 250 hp, 1785 rpm, no conduit or electric panels included

141

Motor Starters
(Part of an entirety) Delta C2000 250 hp starter, MED GMC-800 250 hp starter, (2) 400 amp disconnects, includes conduit from panel to motors, no inlet conduit included

142

143

Ligna Outfeed Rolls
(Part of an entirety) Hydraulic drive, 8 1/2" x 48" rolls, varied spacing, 5' x 20' includes support steel to ground and catwalk over top of rolls

144

5hp Hydraulic Pack
(Part of an entirety) 18" x 30" x 13" tank, includes pump, valves, and all hydraulic lines to equipment

145

Ligna Gang Saw Entirety of lots 139-144
With 10% raise

145A

Gang Saw Blades
All are 30" with 4 3/4" arbor, (36) freshly sharpened blades, (9) used blades-in good condition, may need to be sharpened, includes 4' x 6' tall blade rack

146

3 Strand Log Deck with Stop'n'Load
Electric drive with Tulsa Gearbox, includes support steel to ground, 8' x 10'6", H78 chain, air cylinder on loading arm

147

147A

Scragg Operator's Cab
(Part of an entirety) 54" x 5' x 7' tall, includes legs to floor and catwalk steps, window AC unit, includes control panel for Scragg mill

148

Electric Motors
(Part of an entirety) Used on lot 147, (2) 100 h, 1765 rpm, 404T frame, 460V, no electric panels included

149

Motor Starters
(Part of an entirety) (2) 100 hp motor tronics motor starter, Model: VMX-S-160-CB-4, includes 400 amp disconnect box, includes conduit from box to motors, no inlet wire included

150

Hydraulic Pack
(Part of an entirety) HP unknown, 16" x 34" x 14" tank, includes pumps, valves, and all hydraulic lines to equipment

151

Scragg Mill Entirety of Lots 147-150
With 10% raise

152

Belt Conveyor
16" belt, 18" pan, 6" sides, 22" x 40' long, support steel to ground, includes adjustable slide pan, air cylinders on pan

153

Belt Conveyor
16" belt, 18" pan, 6" sides, 22" x 40' long, support steel to ground, includes adjustable slide pan, air cylinders on pan

154

Spiral Roll Case
Electric drive, 6 1/2" x 36" rolls, 16-24" spacing, 45" x 20'6", includes support steel to ground

155

3 Strand Transfer Deck with Stop'n'Load
11' x 25', electric drive, H78 chain, air cylinders on both loading arms, includes support steel to ground

156

Roll Case
28" x 47', electric drive, 6 1/2" x 15" rolls, 28" spacing

157

Roll Case with Transfer
7' x 12', 4 strand transfer, 6 1/2" x 60" rolls, 24" spacing, electric drive

158

4 Strand Transfer
H78 chain with pegs, strands go over gang saw outfeed, electric drive, 11' x 12'

159

3 Strand Transfer Deck
Electric drive, C55D rooftop chain, 9'6" x 14'6", includes support steel to ground

160

Cornell 2 Blade Edger
32" x 8' dead roll infeed, manual blade movement, 5" x 28" capacity, 40 hp electric motor, includes disconnect, 6" x 14' tailing belt outfeed, (2) 14" blades-both moveable

161

Dust Auger
Underneath lot 160, electric drive, 8" auger, 16" x 12'

162

6 Strand Transfer Deck
Electric drive, used for waste under tailing belt, includes slide pan, only has chain on 2 strands, 7' x 15', in roughly a triangle shape

163

Belt Conveyor
22" x 24' incline section, 50' flat section over trimsaw, 15" belt, 18" pan, 6" sides, electric drive

164

Belt Conveyor
22" x 24' incline section, 50' flat section over trimsaw, 15" belt, 18" pan, 6" sides, electric drive

165

Belt Conveyor
18" belt and pan, 6" sides, electric drive, 2' x 42'

166

Roll Case
Electric drive, first 15' is 6 1/2" x 10" spiral rolls with 24" spacing then switches to 6 1/2" x 22" rolls on 24" spacing, 32" x 48' overall

167

Roll Case
3' x 35', 4 strand, 3' x 12' pop-up transfer-missing chain on 1 strand, 6 1/2" x 22" rolls, 24" spacing, includes (2) electric drives

168

4 Strand Transfer Deck
C55D rooftop chain, electric drive, 11'6" x 28', includes support steel to ground

169

Corley 6 Strand Unscrambler
SN: 75-LU-001, H78 chain with pegs, 8' x 16' x 65" tall, electric drive

170

170A

Trim Saw Blades
(12) 26" blades with 1 5/16" arbor, all freshly sharpened-ready to use

171

4 Strand Green Chain
Electric drive, C55D rooftop chain, 10'6" x 53'

172

3 Strand Transfer Deck
H78 chain, electric drive on 1 strand, H78B rooftop chain on 2 strands, 10'6" x 35'

173

Lumber Carts
(3) 90" x 8', straight wheels, heavy duty

174

Lumber Carts
(2) 90" x 8', straight wheels, Heavy duty, (1) 4' x 90" straight wheels, heavy duty

175

Lumber Carts
(4) 90" x 8', straight wheels, heavy duty

176

Lumber Rack
88" x 9'6" x 7' tall, made from 6" x 6" tube steel-1/2" thick

177

Lumber Carts
(1) 52" x 90", needs 2 wheels, (2) 90" x 8', straight wheels, heavy duty

178

Lumber Carts
(3) 90" x 8', straight wheels, heavy duty

179

Lumber Carts
(4) 90" x 8', straight wheels, heavy duty

180

Belt Conveyor
17" belt, 19" pan, 6" sides, electric drive, 2' x 39'

181

Webster Vibrating Conveyor
Electric drive, 24" pan, 10" flared sides, 38" x 60'

182

Webster Vibrating Conveyor
SN: 092512301, Electric drive, 24" pan, 10" flared sides, 38" x 42', includes slide pans

183

Webster Vibrating Conveyor
Electric drive, 18" pan, 6" flared sides, includes fine section, 27" x 30', located under gangsaw

184

Belt Conveyor
18" belt, 20" pan, 8" sides, electric drive, 26" x 9' section with air cylinder for lift, 20' flat section

185

Belt Conveyor
18" belt, 20" pan, 8" sides, electric drive, 26" x 28'

186

Belt Conveyor
19" belt and pan, 8" sides, electric drive, 23" x 42' long, includes slide pans

187

Barn Sweep
Electric drive, 11" paddles, 5' x 80' long

188

Barn Sweep
14 1/2" paddles, electric drive, 44" x 27' flat section, 30' incline section behind husk

189

3 Strand Transfer Deck
10'6" x 35', electric drive, includes shafts and sprockets on both ends, air cylinder on board stop arm, includes support steel to ground

190

3 Strand Transfer Deck
Electric drive, includes shaft shared with roll case, 11' x 29', 3 strand 4' long tipple loading arms with air cylinder

191

3 Strand Transfer Deck
Electric drive, 10'6" x 31', support steel to ground included

192

193

Electric Motor
(Part of an entirety) 200 hp, 8120C frame, 885 rpm, 440V

194

Benshaw Soft Start
(Part of an entirety) SN: XM20110249-1-1, 200 hp, 480V, 240 amps, includes conduit from panel to motor, no inlet wire included

195

Salem 4 Strand Transfer Deck
(Part of an entirety) Electric drive, 11'6" x 12', does not include shared shafts on either end, includes support steel to first cross beam

196

197

198

Salem 4 Strand 180 Degree Transfer Deck
(Part of an entirety) Electric drive, 12' wide, 19'6" inside to inside measurement, includes support steel to 1st cross beam

199

200

201

202

Allen-Bradley Centerline Motor Control Center
(Part of an entirety) 800 amp horizontal, 300 amp vertical, 15" x 13'6" x 92" tall, includes motor starters on wall as marked

203

Hydraulic Unit
(Part of an entirety) (2) 30 hp motors, 2' x 6' x 20" tank, includes pumps, valves, cooling unit, and all hydraulic lines to equipment

204

Salem Line Bar Resaw and Run-Around System of Lots 192-203
With 10% raise

205

Bands
10" bands, sharpened, ready to use. Total of 13 bands

206

207

4 Strand Transfer Deck
11' x 17'6", includes support steel to ground, does not include shaft, shared with lot 200 or electric drive shared with lot 208

208

Salem Roll Case
6 1/2" x 64" rolls, 28" spacing, electric drive, 6' x 28', 4 strand transfer in roll case

209

Barn Sweep
Electric drive, 10 1/2" paddles, 3' x 40' incline section, 30' flat section

210

211

212

213

Hankinson Refrigerated Air Dryer
Model: 80500, SN: 0311A-3-9604-14, 500 scfm at 100 psig, includes all air line from dryer to equipment, no infeed air line included

214

Sullair Air Compressor
Model: 150-E-40HP, SN: 5116-KLP, meter reads: 17601 hours, 125 max psig, 40 hp electric motor, 34" x 53" x 48" tall, no air line included

215

Comp Air Kellogg Air Compressor
Model: 6030TEL, SN: V9I14542LCR, 30 hp electric motor, 24" x 64" horizontal air tank, no air line included

216

217

218

WEG Electric Motor
(Part of an entirety) 100 hp, 280S/M frame, 1785 rpm

219

Motor Starters
(Part of an entirety) Jocar 460V motor control panel, includes control panel at end of outfeed rolls

220

Ligna Infeed Rolls
(Part of an entirety) SN: F162585, hydraulic drive, air cylinder on tipple arm, 8 1/2" x 30" rolls, 24" spacing, 6' x 14'6", 5 strand skate roll tipple arm-30" long

221

222

20hp Hydraulic Pack
(Part of an entirety) 27" x 48" x 14" tank, includes pumps, valves, cooling unit and all hydraulic lines to equipment

222A

6 Strand Transfer Deck
(Part of an entirety) C55D rooftop chain, electric drive, 10'6" x 11', air cylinder on loading arm. Marked as 225

222B

15hp Hydraulic Pack
(Part of an entirety) 24" x 40" x 18" tank, includes pumps, valves, cooling unit, and all hydraulic lines to equipment. Marked as 226

222C

Belt Conveyor
(Part of an entirety) Electric drive, 18" belt, 19" pan, 3" sides, 2' x 38'. Marked as 228

222D

Belt Conveyor
(Part of an entirety) Electric drive, 18" belt and pan, 6" sides, 22" x 8'. Marked as 229

222E

Belt Conveyor
(Part of an entirety) Electric drive, 16" belt, 20" pan, 8" sides, 25" x 25'. Marked as 230

222F

Tipple Arms
(Part of an entirety) (2) 32" x 19' long tipple arms with skate rolls, air cylinders for tip. Marked as 231

222G

Belt Conveyor
(Part of an entirety) Electric drive, 18" belt, 20" pan, 8"-42" sides, 2' x 31". Marked as 232

222H

3 Strand Transfer Deck
(Part of an entirety) Electric drive, 15' x 15'6", steel slats across width of deck. Marked as 233

223

Jocar Resaw Entirety of Lots 217-222H
With 10% raise

224

Bands
(14) 6" bands, sharpened, fits lot 217

227

6 Strand Transfer Deck
H78B rooftop chain, electric drive, 12' x 45', includes support steel to ground and catwalk beside deck

234

6 Strand Transfer Deck
C55D rooftop chain, electric drive, 10'6" x 16'

235

236

Belt Conveyor
Electric drive, 19" belt, 25" pan, 28" x 16', 3 sides, air cylinder for belt drop

237

6 Strand Green Chain
C55D rooftop chain, electric drive, 10'6" x 40'

238

Lumber Carts
4 carts, 4' x 90", straight wheels, heavy duty

239

Lumber Carts
5 carts, 4' x 90", straight wheels, heavy duty

240

Precision 58" 8 Knife Chipper
(1st of an entirety) SN: C-3232, Size: 58 x 15, bottom discharge, does not include motor, good knives

241

Electric Motor
(Part of an entirety) 150 hp, 900 rpm, 460V, frame-15

242

Motor Starter
(Part of an entirety) Metasol motor starter, 400 amp disconnect box

243

Chain Conveyor
(Part of an entirety) Electric drive, 11" ladderback chain with 18" steel slats, 3' x 24'

244

Precision Chip Shaker
(Part of an entirety) 5' x 10' screen, electric drive, includes all support steel to ground

245

Belt Conveyor
(Part of an entirety) 12" belt, electric drive, 15" x 21'6"

246

Concave Belt Conveyor
(Part of an entirety) Electric drive, 30" cleated belt, 4' x 37', includes catwalk on side of belt

247

Precision Chipper Entirety of Lot 240-246
With 10% raise

248

Webster Vibrating Conveyor
24" pan, 10" flared sides, electric drive, includes fiberglass section and chipper infeed section, does not include metal detector, 37" x 87'

249

MDI Metal Detector
Includes control panel

250

Dust Auger
Electric drive, 8" auger, 15" x 34'

251

Dust Auger
Electric drive, 8" auger, 15" x 40'

252

Motor Starters and Disconnects
Includes all starters and disconnects as marked on wall by Jokar Resaw system, no conduit included

253

Conduit
Includes all conduit from boxes in lot 252 to equipment, no inlet wire included, no 110V wire included

254

Motor Starters and Disconnects
Includes all starters and disconnects as marked on wall facing Scragg mill, no conduit included

255

Conduit
Includes all conduit from all boxes in 254 to equipment, no inlet wire or 110V wire included

256

Motor Starters and Disconnects
Includes all starters and disconnects as marked on both sides of wall towards Head Saw, no conduit included

257

Conduit
Includes all conduit from all boxes in 256 to equipment, no 110V or inlet wire included

258

260

261

Toshiba Electric Motor
(Part of an entirety) 250 hp, N587UZ frame, 460V, 1185 rpm, uninstalled

262

McDonough 7' Head Rig Entirety of Lots 260-261
With 10% raise

275

275A

Volvo Quick Attach Bucket
Model: 92687, SN: 04-01-04C, 5' x 9' x 5' tall

290

320

321

Pine Log Company, IncPrevious Page Listing ID#: 1567895

Free Email Notifications

Share This Listing

Other Sales byThis Company

Sponsored Links

Pine Log Company, Inc

Login

Sign Up

Sign Up

Login

Pine Log Company, Inc
Previous Page Listing ID#: 1567895

Other Sales by
This Company