THIS IS A COMPLETED SALE
View current listings by this company

Canada Sawmill Liquidation - Sainte-Thècle, QC G0X 3G0 (ONLINE ONLY)
Previous Page Listing ID#: 1559318

Auction Location
Sainte-Thecle, QC G0X 3G0 Full Address Available on Thursday, Nov 30

Auction Dates and TimesSALE IS COMPLETED
Friday Dec 1, 2023 Completed

Auction Type
Live Auction

Company Information
Bright Star Realty and Auctions, INC Contact: Loren Beachy Phone: 574-825-0704 Email: beachyauctions@gmail.com Website: brightstarauctions.com GoToAuction.com ID#: 5286 View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area! You may set up alerts by area (zip and radius), keywords, and by company. It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Bidder Terms and Conditions There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items. These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid. “Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION. “Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids. “Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected. “Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder. “Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms. “Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer. "Buyer" means the Winning Bidder with respect to each Lot of Personal Property. "Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. “Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation. “Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer. “High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot. “High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price. “High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot. "Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event. “Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer. “No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale. “Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions. “Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online. "Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered. “Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers. “Personal Property” means all tangible and moveable property, including fixtures, designated as Property. “Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer. “Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer). “Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction. “Property” means the Real Property and the Personal Property. “Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction. “Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction. “Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE. “Reserve Price” means the minimum price that Seller is willing to accept for specific Property. “Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer. “Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid. “Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller). "Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid. “Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration. Governing Law. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online: Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Cash payments totaling Ten Thousand Dollars ($10,000) or more will not be accepted. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion. Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers. ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyer’s account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death. Insurance. Any work performed by Purchaser(s) or Purchaser Representative (including sub-contractors) shall be insured and provide proof of coverage against all claims for injuries against persons or damages to property which may arise from or in connection with the removal of items or equipment. Insurance coverage requirements are as follows: General Liability $1,000,000/$2,000,000 and Worker’s Compensation $1,000,000 or as required by State Law. Seller shall be listed as additionally insured, if required. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.

1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
2. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
3. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
4. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
5. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Cash payments totaling Ten Thousand Dollars ($10,000) or more will not be accepted. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.

Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyer’s account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Insurance. Any work performed by Purchaser(s) or Purchaser Representative (including sub-contractors) shall be insured and provide proof of coverage against all claims for injuries against persons or damages to property which may arise from or in connection with the removal of items or equipment. Insurance coverage requirements are as follows: General Liability $1,000,000/$2,000,000 and Worker’s Compensation $1,000,000 or as required by State Law. Seller shall be listed as additionally insured, if required.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.

Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Information
Type of Auction: Pallet cutstock operation liquidation 00 Information Lot Auction Agent: Eugene Hochstetler 574-242-1100 Highlight Pieces: Rolling stock and some newer mill equipment This auction will be online and phone only! 01 Preview & Inspection Buyers are responsible to do their own inspection to determine the condition of the items they purchase. Inspections times are available as follows: Week of auction from 8 AM to 4 PM or by appointment. Location of Auction: 631 Rue Notre Dame, Sainte-Thècle, QC G0X 3G0 02 Loadout Information International logistics from CN to the US are available 03 Payment Information Payment terms: All items are subject Quebec Sales Tax 14.975%. All payments will need to be in US funds. 13% Online Buyer's Premium in effect for all purchases. Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. 04 CAT 390F L Hydraulic Excavator 1:50 Scale Replica - Die Cast Metal Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 98 Heavy Equipment Key Set 36 Keys Shipping available for $20 99 Manual Sealless Steel Strapping Tool Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30 100 Piche 4 Strand Log Deck (1st of an entirety) SN: 0902094011936, 10' x 31'8", 10' high. Has side shield, electric drive, 3 phase. In good condition 101 4 Strand Transfer Deck (Part of an entirety) Electric drive, 13' x 21'5", 7' high, electric drive. In good condition 102 Step Feeder (Part of an entirety) Electric drive, dual action, 20'8" wide x 9', 10' high, 5 step. In good condition 103 Waste Conveyor under Debarker (Part of an entirety) Electric drive, 24" x 62' long, 5' high. In good condition 104 Waste Elevator (Part of an entirety) Electric drive, approx. 46' long x 32" wide, approx. 25' high. In good condition 105 Log Trough (Part of an entirety) Electric drive, 36" x 19' 106 30" Cambio Soderhamn Debarker (Part of an entirety) Feeder for log and turner, electric drive, 6 arm, 26" roller feeders, catwalk surrounding and over debarker, includes steel structure around debarker. In good condition 107 Debarker Cab and Controls (Part of an entirety) 6' x 6' cab, AC, 2 sided. In good condition 107A Debarker Entirety of Lots 100-107 With 10% raise. 108 Electric Panels for Debarker 4 panels, 3' x 4' x 13" depth, 2' x 30" x 11" depth, 3' x 42" x 15" depth, 24" x 36" x 10" depth. 109 Outside Catwalk and Stairs Leading to Debarker 8' x 80". In good condition 110 Hourglass Roll Case Electric drive, 31' long x 32" wide, 21" sides, includes structure to floor. In good condition 111 Catwalk and Stairs Beside the transfer deck leading to Scragg, 32' long x 72" wide. In good condition 112 4 Strand Transfer Deck (1st of an entirety) Electric drive, 112" x 26', leading to Scragg, includes side shield and structure to the floor. In good condition 113 4 Strand Unscrambler (Part of an entirety) Electric drive, 103" x 104". In good condition 114 Twin PHL Scragg Mill (Part of an entirety) Electric drive, includes log trough infeed and outfeed, 48" blades, 80" wide x 47' long, includes structure to floor and catwalks on both sides. In good condition 115 Scragg Cab and Controls (Part of an entirety) 45" x 69" x 86" high, includes structure to floor, has AC 116 Control Panels for Scragg (Part of an entirety) 48" wide x 60" high x 20" deep, 2' x 3' x 9" deep 117 Hydraulic Pack (Part of an entirety) Electric drive, Feeds infeed for Scragg, includes radiator, 24" x 40" 118 Scragg Entirety of Lots 112-117 With 10% raise. 119 Belt Waste Conveyor Electric drive, 22' x 20" wide, includes slide pans under Scragg 120 Dust Blower Electric drive, 12" 121 Belt Waste Conveyor Electric drive, 56' long x 24" wide, includes slide pans 122 Drop Belt Conveyor Hydraulic drive, 14" x 102" 123 Drop Belt Conveyor Hydraulic drive, 14" x 102". In good condition 124 48" Blade 38 teeth, for Scragg. In good condition 125 48" Blade 38 teeth, for Scragg. In good condition 126 Scrap Conveyor No drive,6" wide x 13' long. In good condition 127 6 Strand Transfer Deck Electric drive, 10'6" wide x 14'5" long, includes structure to ground. In good condition 128 Valley Bull Edger Top arbor, Electric drive, (2) bay, (2) 75 hp motors, includes shut offs, includes 56" x 8 infeed, controls, 20" and 24" bays, tailing belts, 20' outfeed, structure, and catwalks surrounding 129 Hydraulic Pack Electric drive, 2' x 47". In good condition 130 Comact Resaw 75 hp electric drive, includes controls. 130A Blades for Edger 6 total blades, diameter 16", center hole 3.243", 32 teeth, blades fit lot 130 131 Comact Bull Edger Double arbor, 125 and 150 hp electric drive, includes shut off and controls, 52" x 9' infeed, 30" and 16" bays, catwalk and structure to ground. In good condition 131A New Blades for Bull Edger 20 or more blades, diameter 14", center hole 5 1/2", 16 teeth, blades fit lot 131 132 Edger Spacers 2 boxes, for edger on lot 131 133 Electrical Control Box 36" x 60" x 13 deep, used for edger 134 Belt Conveyor Electric drive, 112" x 21" includes sides 27" high 135 Live Roll Case Electric drive, 5 rolls are spiral, 54" wide x 19'7" long, includes surrounding steel structure to floor 136 7 Strand Transfer Deck Electric drive, 10' wide x 99" long, includes surrounding steel structure to floor 137 Belt Conveyor Electric drive, 19" wide x 20'9" long, 4" sides 138 Belt Conveyor Electric drive, 24" wide x 24' long, 5 1/2" sides, includes covers. 139 Belt Conveyor Electric drive, 48" x 16', includes all covers 140 Belt Conveyor Electric drive, 48" x 104", no sides 141 5 Strand Transfer Deck Electric drive, 9' wide x 23'3" long 142 Deck Board Trimmer Electric drive, 3 blades, 64" deep x 116" wide x 46" high, 4 strand, slide pans to belt conveyor included, steel structure to ground 143 Control Box 30" x 36" x 9" deep, used with trimmer 144 Catwalk and Stairs Surrounding trimmers 145 Turn Table Electric drive, 6' 146 Belt Conveyor Electric drive, 20" wide x 17'8" long, 6" sides 147 Belt Conveyor Electric drive, 20" wide x 17'8" long, 6" sides 148 4 Strand Transfer Deck Electric drive, 80" wide x 33' long 149 Belt Conveyor Electric drive, 20" wide x 33' long, 6" sides 150 Morbark Chippac (1st of an entirety) Electric drive, UPDATE! 58", 3 knives, includes pipe to cyclone and shutoff, 125 hp 151 Cyclone (Part of an entirety) 64" diameter, 64" high 152 Shaker Screen (Part of an entirety) Electric drive, 84" x 84", 3 phase, 7.5 hp, 115" x 7" box, includes steel structure to ground 153 Chipper Entirety of Lots 150-152 With 10% raise. 154 General Dust Blower Electric drive, 16", includes infeed pipe, 10 hp 155 Belt Conveyor Electric drive, 18" belt, 3 phase 2 hp, 24" wide x 118" long 156 Webster Vibrating Conveyor LOT 157 SELLS WITH THIS LOT. Electric drive, 10 hp, 18" wide bottom 30" top sides, 84' long, feeds into chipper 157 Metal Detector SELLS WITH LOT 156. 36" long, 9" sides, 18" wide bottom 34" top sides. Is in vibrating conveyor 158 Belt Conveyor Electric drive, 1.5 hp, 32" wide x 12' long, 5" sides, on incline 159 Belt Conveyor Electric drive, 3 hp, 8' wide x 17' long on incline, includes slide plates and steel structure to ground 160 Belt Conveyor Electric drive, 2 hp, 36" belt, 40" wide x 10' long on incline under Comact edger 161 Hydraulic Pack Electric drive, 20 hp, 10" wide x 65" long x 19" high 162 Belt Conveyor Electric drive, 7.5 hp, 18" belt, 18" wide bottom and 32" top sides x 43' long leaving edger 163 Catwalk and Steps 3' high, beside lot 162 164 5 Strand Unscrambler No drive, 110" wide x 80" deep x 6' high, includes drum drive with 18" drive 165 3 Blade Trimmer Electric drive, 9' wide x 9'6" long, includes steel structure to ground, 4 strand, used for slabs 166 Belt Conveyor Electric drive, 2 hp, 12" wide x 15' long, on incline with 4" sides 167 Belt Conveyor Electric drive, 8 1/2" wide x 20'6" long, 7" sides 168 3 Strand Transfer Deck Electric drive, 2 hp, 38" wide x 15' long x 32" high 169 2019 YCDM G300 Horizontal Resaw Electric drive, 8" wide, 2" blade, 17'6" infeed belt, on wheels, complete with hydraulic pack, with return, 102" overall width. Almost new condition 170 Belt Conveyor Electric drive, 1/2 hp, 6" belt, 2" sides x 12" wide x 31' long, 20" high with adjustable legs 171 Transformer Used with resaw 172 New Blades For lot 169, approx. 30 or more 173 Atlas Copco Air Compressor Model: GA22, SN: A11240065, 30 hp. In good condition 174 Electrical Control Box 20" x 20" x 9" deep. Used for the resaw line. In good condition 175 Sullair Air Compressor Model: ES-8, SN: 003-1212, electric drive, 25 hp. In good condition 176 Parker Air Dryer SN: 3853550002. In good condition 177 Excel Pro Electrical Box 5' x 5' x 17" deep with legs 178 Electrical Control Box 36" x 60" x 13" deep 179 Electrical Control Box 35" x 30" x 12" deep 181 Electrical Control Panel 36" x 48" x 13 deep. Has display screen 182 Electrical Control Panel 16" x 14" x 6" deep 183 2015 6 Strand Cardinal Trimmer Electric drive, 18" belt, 6 blades, 116" wide x 12' long, includes steel structure to ground, safety guards, & scrap conveyor underneath 183A Blades for Cardinal Trimsaw 10 or more blades, 2 different sizes. Size 1: diameter 22", center hole 1.471", 85 teeth. Size 2: diameter 25 3/4", center hole 1.471", 120 teeth. Blades fit lot 183 184 Belt Conveyor Electric drive, 5 hp, 66" belt, 7' wide x 20'10" long, includes slide pans on incline, 54" high 185 Belt Conveyor Electric drive, 12" belt, 20" wide x 32' long, 5" sides 186 Chip Chain Drag Conveyor Electric drive, 16" wide, approx. 30' long on incline, with hopper 187 Belt Conveyor Electric drive, elevated, 16" wide, with catwalk and steel structure to the ground, approx. 85' long, 15' elevated 188 Concept-Air Dust Collector Silo (1st of an entirety) Electric drive dispenser, 3 hp, approx. 30' high, 10' diameter, with access ladder, includes disconnects 188A Bags for Dust Collector (Part of an entirety) Used with lot 188 189 Concept-Air Blower (Part of an entirety) Model: HDJ 24, SN: 1503191V1, 75 hp, 60" blower, includes disconnect 190 All Outside Pipe (Part of an entirety) 26" pipe 191 Concept-Air Dust Collector Entirety of Lots 188-190 With 10% raise. 192 Dust Drag Chain Conveyor Electric drive, 16" wide x approx. 55' long, 8" sides 193 All Dust Pipe Insider Various sizes 12" - 26", includes 2 racks of pipe and fittings, outside by dust collector 194 Hansen Tek Fire Suppression Control Box Model: AN104, SN: 3234, for dust collector system. 195 4 Strand Green Chain Electric drive, 5 hp, 85" wide x 53' long, 32" 'high. In very good condition 196 3 Strand Transfer Deck Electric drive, 78" wide x 36' long, 30" tall 197 Pendu Stacker Model: 4600E, SN: 1564, scissor lift type 198 2 Strand Transfer Deck 40" wide x 17'6" long, hydraulic drive 199 Hydraulic Pack Electric drive, 20 hp, 24" x 35' x 13", with radiator. Used with Pendu stacker 200 Baker 4 Section Lumber Stacking Rack 7' x 7' x 57" high 201 ABF Belt Conveyor Electric drive, 36" x 48" long 201A Electrical Control Box 20" x 30" x 10" deep 202 4 Strand Board Unscrambler Electric drive, 2 hp, 9' wide x 45" deep x 58" high, adjustable 203 3 Strand Transfer Deck Electric drive, 3 hp, 40" x 18' x 30" high, rooftop chain 204 90 Degree Transfer Deck Electric drive, 3 strand, 37" wide x 80" x 36" high 205 3 Strand Transfer Deck Electric drive, 3 hp, 40" x 26' long x 36" high, rooftop chain 206 3 Strand Transfer Deck Electric drive, 43" wide x 17'8" long x 34" high 207 Permo Dome Hoop Building NEW IN 2020!! 60' x 120' x 30' high approximately. Doesn't include doors or Big Ass fan. Sells with cement blocks 208 Brown and Sharp Cutter and Tool Grinding Machine SN: 525-10-115 209 Knife Sharpening Machine 210 Feeder Arm for Debarker Goes with lot 106 250 2019 Liebherr Wheel Loader Model: L556, SN: VATZ1332CZB046617, Meter reads 7287 hrs., has forestry package, 188 hp, enclosed cab with heat/AC, joystick controls, backup camera, radio, power lift engine bay, fire suppression system. Great running machine! Bucket is not included. 251 Vallee Log Grapple Model: V25-5050-840, SN: 97F 0903, 4000 lbs., 69" wide, for loader 252 H and H Trash Bucket 9'6" wide, for loader 253 Loader Bucket 104" wide 254 1990 Komatsu Mini Excavator Model: PC28UU, SN: 4871, meter reads: 3389 hours, Has an Articulating Boom, Diesel engine, 34" bucket, open cab 255 2009 Liebherr Log Loader Model: 924C, SN: 5353, Self-propelled, meter show 10,550 hrs, 180 hp engine, Forestry package, enclosed cab, heat & air, joystick controls, tilt steering, good tires, good clean working machine 255A 3 Tires for Liebherr Log Loader 12.00-20 NHS, fits lot 255 256 1997 Hood Slasher Model: 24000, SN: H245302H01293, self propelled, 8' folding deck, meter reads: 3802 hours, enclosed cab, continuous swivel grapple, no heat/AC, has Joystick controls, John Deere engine (2439 hours), 60" blade, has several hydraulic leaks, Runs Good! 257 Pup Trailer 23' bunk, 31' overall, 8' wide, pintle hitch, no lights. No title, bill of sale only 257A 3 Tires 11R22.5, fits lot 257 pup trailer general tire 258 1987 Manac Van Trailer Model: 90248101, VIN: 2M5921469H1016895, office trailer, 48' long. Has security system, refrigerator, landing steps, heat/AC. No controls, Used for lunchroom 259 Storage Container Model: TMG-SC09, SN: SC0900146, 1 single door and 1 double door, 9' x 7' x 98' high, 1 window, no contents, floor rot inside door 260 Tanguay Stationary Loader Model: PL 150, meter reads: 17819 hours, lift capacity: 27000 lbs., 39' reach, all electric 125 hp, swivel base has been rebuilt, no grapple, enclosed cab with heat/AC, Joystick controls. Base 23' x 13'. In good condition 261 Clark Forklift Model: CMP40D, SN: CMP405D0349-6877KF, meter reads: 6860 hours, 30 hours on new engine, single stage, 8' mast, 5' forks, has side shift, enclosed cab with heat, diesel engine, dual front wheels, 12' reach height 300 Belt Conveyor 36" x 48", no drive 301 Scissor Lift Hydraulic cylinder, 82" x 50" 302 Transfer Deck 11'7" x 58", no drive 303 4 Strand Transfer Deck No drive, 18'3" x 68". In rough condition 304 5 Strand Transfer Deck Electric drive, 102" x 17', 42" high, H78 chain. In good condition 305 Belt Conveyor Electric drive, 36" x 50". In good condition 306 4 Strand Transfer Deck No drive, 77" x 70", rooftop chain. In good condition 307 Belt Conveyor No drive, 10" belt, 16" x 15'9", 24" high 308 Belt Conveyor No drive, 20" belt, 26" x 38'. Has some wear 309 Belt Conveyor No drive, 12" belt, 17" x 26'6" x 42" high, incline. In good condition 310 Belt Conveyor Electric drive, 23" belt, 33" x 20'8", 90" high, incline. In good condition 311 Conveyor No drive, no belt, 28" x 16'. Rough condition 312 Belt Conveyor No drive, 12" belt, 18" x 19'6". Has some wear 313 Live Roll Case No drive, 48" rollers, 52" x 16'6" 314 Live Roll Case No drive, 52" rollers, 66" x 10' 315 Live Roll Case No drive, 52" rollers, 66" x 21'6" 316 Bull Wheels and Plates (2) 9" x 21" wheels, (2) 20" x 22" plates 317 Belt Conveyor No drive, 18" belt, 32" x 31" with 24" metal detector 319 Steel Table 36" x 60" 320 Lumber Cart 4' x 6' 6", missing wheel 321 Lumber Cart 6' x 4' 322 Lumber Cart 6' x 4' 323 Lumber Cart 6' x 4' 324 Lumber Cart 6' x 4' 325 Lumber Cart 7' 6" x 4' 326 Lumber Cart 6' x 4' 327 Lumber Cart 7' 6" x 4' 328 Lumber Cart 6' x 4' 329 Lumber Cart 6' x 4' 330 Lumber Cart 7' 6" x 4', missing 2 wheels 331 Lumber Cart 6' x 4' 332 Lumber Cart 6' x 4' 333 Lumber Cart 4' x 4' 334 Lumber Cart 4' x 4' 335 Lumber Cart 6' x 4', comes with pallet of extra wheels 336 Lumber Cart 6' x 4' 337 Lumber Cart 7' 6" x 4' 338 Lumber Cart 4' x 4' 339 Lumber Cart 6' x 4' 340 Lumber Cart 7' 6" x 4' 341 Lumber Cart 6' x 4', missing 1 wheels 342 Lumber Cart 6' x 4' 343 Lug Loader Electric drive, 89" x 100", 58" high. In good condition 344 Shop Built 4 Strand Transfer Deck 8' x 15', 10' high, includes 3 belt conveyors (1) 18" x 13', (2) 8" x 160". Has some wear 345 2005 Pendu 5400 Bandsaw SN: 0502-8618Y, electric drive, 40 hp, 15" x 124" infeed/outfeed, 36" wheels(band), 9' high. In very good condition 346 Jeffrey Top Feed Hammermill Bottom discharge, 64" x 48", 40" high. In good condition 347 Tronco Bull Edger/Gang Saw Top arbor, Electric drive, 75 hp, 20" infeed rollers, 6' x 92", 92" high, comes with 64" x 22" infeed. In new condition, NEVER USED!! 348 Comact Gangsaw Model: SC4742, no drive, 24" infeed rollers, 58" x 64", 88" high 349 2012 L and M Equipment Package Cross Cut Saw Model: HMPC-7-24, SN: 76112, electric drive, 24' long, includes 4 blades and comes with drag conveyor 25' with 9' incline. 350 RK Machinery Air Compressor No drive, 10 hp, 120 gallons. Condition unknown 351 Webster Air Compressor SN: 0905143, electric drive, 10 hp. Condition unknown 352 Pallet of Cylinders Parts for Debarker 353 Electric Motor and Containers 354 Electric Motors and Gear Drive 5 hp and 1.5 hp 355 Transformer 30" x 26", 14" deep 356 Pallet of Chain and Belts Various sizes 357 Feed Rollers and Sprockets 358 Pallet of Feed Rollers and Spacers 359 Pallet of Guards 360 Pallet of Motors and Belts 361 Pallet of Chains 362 Pallet of Motors 2 hp, 1 hp, various sizes 363 Pallet of Misc. Parts 364 Pallet of Grab Hooks 365 Pallet of Filters Air/hydraulic/oil 366 Pallet of Hydraulic Hoses 367 Pallet of Oils and Battery Exide battery, 15W 40 oil, Liebherr gear oil 368 2 Cylinders Used with Liebherr log loader lot 255 369 Pallet of Belts 370 Pallet of Belts, Blades, and Gears 371 Pallet of Hydraulic Manifold 4 station 372 Pallet of Roller Cylinder and Parts 373 Pallet of Cylinders and Gears 374 Pallet of Spacers and Tire Chains 43" spacers, snow chains for Liebherr loader 375 Pallet of Chain Transfer Parts 376 Pallet of Manifolds and Gears 377 Pallet of Vallee Bull Edger Spacers 5 3/8" inside, 7 3/16" outside 378 Transformer 16" x 16" x 12 deep 379 Belt Conveyor 10" belt, 16" x 9' x 60" high 380 Belt Conveyor 13" belt, 14" x 140", incline 60" high 381 Grapple Hydraulic, possibly for slasher lot 256 382 Saw Blade 60" 383 Saw Blade 48" 384 Saw Blade 48", 40 teeth 385 Saw Blade 48" 386 Saw Blade 48" 387 Saw Blade 48" 388 Saw Blade 48", 44 teeth 389 Pallet of Cylinders and Bull Bearings 390 Cylinder Cambio Used on debarker 391 Berotech Automatic Knife Grinder Model: EM60, SN: 0004140, electric drive, 600V, 3 phase. In very good condition 392 Container 8' wide x 115" high x 40' long, no contents 393 Parts for Debarker 394 Sorti Wood Working Machine Model: R/16, SN: 0230322051 USA, Electric drive, 30 hp, 3 phase, 480V, 6" infeed belt, 6' x 102" x 100" overall. In good condition 395 SKH Chipper Electric drive, 50 hp, top feed, bottom discharge. In good condition 396 Cardinal Edger SN: 840-A, electric drive, 3 phase. Comes with infeed and tailing belt, 2 blades- one fixed, tailing belt 54" wide x 152" long x 10' high, infeed 48" wide x 12' long x 9' high, 3 hp, electric drive. In good condition 397 Baker Cutoff System Model: BCO-O, SN: 95-146, electric drive, 3 head, 55" wide x 22' long x 10' high. In good condition 398 Stenner 105 Bandsaw Model: MH510, SN: AP10047, electric drive, 5 head, pneumatic saw straining comes with feed table, 12" x 20', 13' x 21' x 13' high, 4.5" wide band wheel. In rough condition 399 Comact Maxi Tour Slasher Model: 60, SN: 965110, electric drive, 75 hp, 72" blade, outfeed 24" belt x 15', infeed 14" belt x 10'. Has some wear 400 Wright Blade Sharpener Model: W-150 HAD, electric drive, 3 phase, 575V

Listing Information

Type of Auction: Pallet cutstock operation liquidation

Information Lot
Auction Agent: Eugene Hochstetler 574-242-1100
Highlight Pieces: Rolling stock and some newer mill equipment

This auction will be online and phone only!

Preview & Inspection
Buyers are responsible to do their own inspection to determine the condition of the items they purchase. Inspections times are available as follows: Week of auction from 8 AM to 4 PM or by appointment.
Location of Auction: 631 Rue Notre Dame, Sainte-Thècle, QC G0X 3G0

Loadout Information
International logistics from CN to the US are available

Payment Information
Payment terms: All items are subject Quebec Sales Tax 14.975%. All payments will need to be in US funds. 13% Online Buyer's Premium in effect for all purchases. Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice.

CAT 390F L Hydraulic Excavator 1:50 Scale Replica - Die Cast Metal
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s

Heavy Equipment Key Set 36 Keys
Shipping available for $20

Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

100

Piche 4 Strand Log Deck
(1st of an entirety) SN: 0902094011936, 10' x 31'8", 10' high. Has side shield, electric drive, 3 phase. In good condition

101

4 Strand Transfer Deck
(Part of an entirety) Electric drive, 13' x 21'5", 7' high, electric drive. In good condition

102

Step Feeder
(Part of an entirety) Electric drive, dual action, 20'8" wide x 9', 10' high, 5 step. In good condition

103

Waste Conveyor under Debarker
(Part of an entirety) Electric drive, 24" x 62' long, 5' high. In good condition

104

Waste Elevator
(Part of an entirety) Electric drive, approx. 46' long x 32" wide, approx. 25' high. In good condition

105

Log Trough
(Part of an entirety) Electric drive, 36" x 19'

106

30" Cambio Soderhamn Debarker
(Part of an entirety) Feeder for log and turner, electric drive, 6 arm, 26" roller feeders, catwalk surrounding and over debarker, includes steel structure around debarker. In good condition

107

Debarker Cab and Controls
(Part of an entirety) 6' x 6' cab, AC, 2 sided. In good condition

107A

Debarker Entirety of Lots 100-107
With 10% raise.

108

Electric Panels for Debarker
4 panels, 3' x 4' x 13" depth, 2' x 30" x 11" depth, 3' x 42" x 15" depth, 24" x 36" x 10" depth.

109

Outside Catwalk and Stairs Leading to Debarker
8' x 80". In good condition

110

Hourglass Roll Case
Electric drive, 31' long x 32" wide, 21" sides, includes structure to floor. In good condition

111

Catwalk and Stairs
Beside the transfer deck leading to Scragg, 32' long x 72" wide. In good condition

112

4 Strand Transfer Deck
(1st of an entirety) Electric drive, 112" x 26', leading to Scragg, includes side shield and structure to the floor. In good condition

113

4 Strand Unscrambler
(Part of an entirety) Electric drive, 103" x 104". In good condition

114

Twin PHL Scragg Mill
(Part of an entirety) Electric drive, includes log trough infeed and outfeed, 48" blades, 80" wide x 47' long, includes structure to floor and catwalks on both sides. In good condition

115

Scragg Cab and Controls
(Part of an entirety) 45" x 69" x 86" high, includes structure to floor, has AC

116

Control Panels for Scragg
(Part of an entirety) 48" wide x 60" high x 20" deep, 2' x 3' x 9" deep

117

Hydraulic Pack
(Part of an entirety) Electric drive, Feeds infeed for Scragg, includes radiator, 24" x 40"

118

Scragg Entirety of Lots 112-117
With 10% raise.

119

Belt Waste Conveyor
Electric drive, 22' x 20" wide, includes slide pans under Scragg

120

Dust Blower
Electric drive, 12"

121

Belt Waste Conveyor
Electric drive, 56' long x 24" wide, includes slide pans

122

Drop Belt Conveyor
Hydraulic drive, 14" x 102"

123

Drop Belt Conveyor
Hydraulic drive, 14" x 102". In good condition

124

48" Blade
38 teeth, for Scragg. In good condition

125

48" Blade
38 teeth, for Scragg. In good condition

126

Scrap Conveyor
No drive,6" wide x 13' long. In good condition

127

6 Strand Transfer Deck
Electric drive, 10'6" wide x 14'5" long, includes structure to ground. In good condition

128

Valley Bull Edger
Top arbor, Electric drive, (2) bay, (2) 75 hp motors, includes shut offs, includes 56" x 8 infeed, controls, 20" and 24" bays, tailing belts, 20' outfeed, structure, and catwalks surrounding

129

Hydraulic Pack
Electric drive, 2' x 47". In good condition

130

Comact Resaw
75 hp electric drive, includes controls.

130A

Blades for Edger
6 total blades, diameter 16", center hole 3.243", 32 teeth, blades fit lot 130

131

Comact Bull Edger
Double arbor, 125 and 150 hp electric drive, includes shut off and controls, 52" x 9' infeed, 30" and 16" bays, catwalk and structure to ground. In good condition

131A

New Blades for Bull Edger
20 or more blades, diameter 14", center hole 5 1/2", 16 teeth, blades fit lot 131

132

Edger Spacers
2 boxes, for edger on lot 131

133

Electrical Control Box
36" x 60" x 13 deep, used for edger

134

Belt Conveyor
Electric drive, 112" x 21" includes sides 27" high

135

Live Roll Case
Electric drive, 5 rolls are spiral, 54" wide x 19'7" long, includes surrounding steel structure to floor

136

7 Strand Transfer Deck
Electric drive, 10' wide x 99" long, includes surrounding steel structure to floor

137

Belt Conveyor
Electric drive, 19" wide x 20'9" long, 4" sides

138

Belt Conveyor
Electric drive, 24" wide x 24' long, 5 1/2" sides, includes covers.

139

Belt Conveyor
Electric drive, 48" x 16', includes all covers

140

Belt Conveyor
Electric drive, 48" x 104", no sides

141

5 Strand Transfer Deck
Electric drive, 9' wide x 23'3" long

142

Deck Board Trimmer
Electric drive, 3 blades, 64" deep x 116" wide x 46" high, 4 strand, slide pans to belt conveyor included, steel structure to ground

143

Control Box
30" x 36" x 9" deep, used with trimmer

144

Catwalk and Stairs
Surrounding trimmers

145

Turn Table
Electric drive, 6'

146

Belt Conveyor
Electric drive, 20" wide x 17'8" long, 6" sides

147

Belt Conveyor
Electric drive, 20" wide x 17'8" long, 6" sides

148

4 Strand Transfer Deck
Electric drive, 80" wide x 33' long

149

Belt Conveyor
Electric drive, 20" wide x 33' long, 6" sides

150

Morbark Chippac
(1st of an entirety) Electric drive, UPDATE! 58", 3 knives, includes pipe to cyclone and shutoff, 125 hp

151

Cyclone
(Part of an entirety) 64" diameter, 64" high

152

Shaker Screen
(Part of an entirety) Electric drive, 84" x 84", 3 phase, 7.5 hp, 115" x 7" box, includes steel structure to ground

153

Chipper Entirety of Lots 150-152
With 10% raise.

154

General Dust Blower
Electric drive, 16", includes infeed pipe, 10 hp

155

Belt Conveyor
Electric drive, 18" belt, 3 phase 2 hp, 24" wide x 118" long

156

Webster Vibrating Conveyor
LOT 157 SELLS WITH THIS LOT. Electric drive, 10 hp, 18" wide bottom 30" top sides, 84' long, feeds into chipper

157

Metal Detector
SELLS WITH LOT 156. 36" long, 9" sides, 18" wide bottom 34" top sides. Is in vibrating conveyor

158

Belt Conveyor
Electric drive, 1.5 hp, 32" wide x 12' long, 5" sides, on incline

159

Belt Conveyor
Electric drive, 3 hp, 8' wide x 17' long on incline, includes slide plates and steel structure to ground

160

Belt Conveyor
Electric drive, 2 hp, 36" belt, 40" wide x 10' long on incline under Comact edger

161

Hydraulic Pack
Electric drive, 20 hp, 10" wide x 65" long x 19" high

162

Belt Conveyor
Electric drive, 7.5 hp, 18" belt, 18" wide bottom and 32" top sides x 43' long leaving edger

163

Catwalk and Steps
3' high, beside lot 162

164

5 Strand Unscrambler
No drive, 110" wide x 80" deep x 6' high, includes drum drive with 18" drive

165

3 Blade Trimmer
Electric drive, 9' wide x 9'6" long, includes steel structure to ground, 4 strand, used for slabs

166

Belt Conveyor
Electric drive, 2 hp, 12" wide x 15' long, on incline with 4" sides

167

Belt Conveyor
Electric drive, 8 1/2" wide x 20'6" long, 7" sides

168

3 Strand Transfer Deck
Electric drive, 2 hp, 38" wide x 15' long x 32" high

169

2019 YCDM G300 Horizontal Resaw
Electric drive, 8" wide, 2" blade, 17'6" infeed belt, on wheels, complete with hydraulic pack, with return, 102" overall width. Almost new condition

170

Belt Conveyor
Electric drive, 1/2 hp, 6" belt, 2" sides x 12" wide x 31' long, 20" high with adjustable legs

171

Transformer
Used with resaw

172

New Blades
For lot 169, approx. 30 or more

173

Atlas Copco Air Compressor
Model: GA22, SN: A11240065, 30 hp. In good condition

174

Electrical Control Box
20" x 20" x 9" deep. Used for the resaw line. In good condition

175

Sullair Air Compressor
Model: ES-8, SN: 003-1212, electric drive, 25 hp. In good condition

176

Parker Air Dryer
SN: 3853550002. In good condition

177

Excel Pro Electrical Box
5' x 5' x 17" deep with legs

178

Electrical Control Box
36" x 60" x 13" deep

179

Electrical Control Box
35" x 30" x 12" deep

181

Electrical Control Panel
36" x 48" x 13 deep. Has display screen

182

Electrical Control Panel
16" x 14" x 6" deep

183

2015 6 Strand Cardinal Trimmer
Electric drive, 18" belt, 6 blades, 116" wide x 12' long, includes steel structure to ground, safety guards, & scrap conveyor underneath

183A

Blades for Cardinal Trimsaw
10 or more blades, 2 different sizes. Size 1: diameter 22", center hole 1.471", 85 teeth. Size 2: diameter 25 3/4", center hole 1.471", 120 teeth. Blades fit lot 183

184

Belt Conveyor
Electric drive, 5 hp, 66" belt, 7' wide x 20'10" long, includes slide pans on incline, 54" high

185

Belt Conveyor
Electric drive, 12" belt, 20" wide x 32' long, 5" sides

186

Chip Chain Drag Conveyor
Electric drive, 16" wide, approx. 30' long on incline, with hopper

187

Belt Conveyor
Electric drive, elevated, 16" wide, with catwalk and steel structure to the ground, approx. 85' long, 15' elevated

188

Concept-Air Dust Collector Silo
(1st of an entirety) Electric drive dispenser, 3 hp, approx. 30' high, 10' diameter, with access ladder, includes disconnects

188A

Bags for Dust Collector
(Part of an entirety) Used with lot 188

189

Concept-Air Blower
(Part of an entirety) Model: HDJ 24, SN: 1503191V1, 75 hp, 60" blower, includes disconnect

190

All Outside Pipe
(Part of an entirety) 26" pipe

191

Concept-Air Dust Collector Entirety of Lots 188-190
With 10% raise.

192

Dust Drag Chain Conveyor
Electric drive, 16" wide x approx. 55' long, 8" sides

193

All Dust Pipe Insider
Various sizes 12" - 26", includes 2 racks of pipe and fittings, outside by dust collector

194

Hansen Tek Fire Suppression Control Box
Model: AN104, SN: 3234, for dust collector system.

195

4 Strand Green Chain
Electric drive, 5 hp, 85" wide x 53' long, 32" 'high. In very good condition

196

3 Strand Transfer Deck
Electric drive, 78" wide x 36' long, 30" tall

197

Pendu Stacker
Model: 4600E, SN: 1564, scissor lift type

198

2 Strand Transfer Deck
40" wide x 17'6" long, hydraulic drive

199

Hydraulic Pack
Electric drive, 20 hp, 24" x 35' x 13", with radiator. Used with Pendu stacker

200

Baker 4 Section Lumber Stacking Rack
7' x 7' x 57" high

201

ABF Belt Conveyor
Electric drive, 36" x 48" long

201A

Electrical Control Box
20" x 30" x 10" deep

202

4 Strand Board Unscrambler
Electric drive, 2 hp, 9' wide x 45" deep x 58" high, adjustable

203

3 Strand Transfer Deck
Electric drive, 3 hp, 40" x 18' x 30" high, rooftop chain

204

90 Degree Transfer Deck
Electric drive, 3 strand, 37" wide x 80" x 36" high

205

3 Strand Transfer Deck
Electric drive, 3 hp, 40" x 26' long x 36" high, rooftop chain

206

3 Strand Transfer Deck
Electric drive, 43" wide x 17'8" long x 34" high

207

Permo Dome Hoop Building
NEW IN 2020!! 60' x 120' x 30' high approximately. Doesn't include doors or Big Ass fan. Sells with cement blocks

208

Brown and Sharp Cutter and Tool Grinding Machine
SN: 525-10-115

209

Knife Sharpening Machine

210

Feeder Arm for Debarker
Goes with lot 106

250

2019 Liebherr Wheel Loader
Model: L556, SN: VATZ1332CZB046617, Meter reads 7287 hrs., has forestry package, 188 hp, enclosed cab with heat/AC, joystick controls, backup camera, radio, power lift engine bay, fire suppression system. Great running machine! Bucket is not included.

251

Vallee Log Grapple
Model: V25-5050-840, SN: 97F 0903, 4000 lbs., 69" wide, for loader

252

H and H Trash Bucket
9'6" wide, for loader

253

Loader Bucket
104" wide

254

1990 Komatsu Mini Excavator
Model: PC28UU, SN: 4871, meter reads: 3389 hours, Has an Articulating Boom, Diesel engine, 34" bucket, open cab

255

2009 Liebherr Log Loader
Model: 924C, SN: 5353, Self-propelled, meter show 10,550 hrs, 180 hp engine, Forestry package, enclosed cab, heat & air, joystick controls, tilt steering, good tires, good clean working machine

255A

3 Tires for Liebherr Log Loader
12.00-20 NHS, fits lot 255

256

1997 Hood Slasher
Model: 24000, SN: H245302H01293, self propelled, 8' folding deck, meter reads: 3802 hours, enclosed cab, continuous swivel grapple, no heat/AC, has Joystick controls, John Deere engine (2439 hours), 60" blade, has several hydraulic leaks, Runs Good!

257

Pup Trailer
23' bunk, 31' overall, 8' wide, pintle hitch, no lights. No title, bill of sale only

257A

3 Tires
11R22.5, fits lot 257 pup trailer general tire

258

1987 Manac Van Trailer
Model: 90248101, VIN: 2M5921469H1016895, office trailer, 48' long. Has security system, refrigerator, landing steps, heat/AC. No controls, Used for lunchroom

259

Storage Container
Model: TMG-SC09, SN: SC0900146, 1 single door and 1 double door, 9' x 7' x 98' high, 1 window, no contents, floor rot inside door

260

Tanguay Stationary Loader
Model: PL 150, meter reads: 17819 hours, lift capacity: 27000 lbs., 39' reach, all electric 125 hp, swivel base has been rebuilt, no grapple, enclosed cab with heat/AC, Joystick controls. Base 23' x 13'. In good condition

261

Clark Forklift
Model: CMP40D, SN: CMP405D0349-6877KF, meter reads: 6860 hours, 30 hours on new engine, single stage, 8' mast, 5' forks, has side shift, enclosed cab with heat, diesel engine, dual front wheels, 12' reach height

300

Belt Conveyor
36" x 48", no drive

301

Scissor Lift
Hydraulic cylinder, 82" x 50"

302

Transfer Deck
11'7" x 58", no drive

303

4 Strand Transfer Deck
No drive, 18'3" x 68". In rough condition

304

5 Strand Transfer Deck
Electric drive, 102" x 17', 42" high, H78 chain. In good condition

305

Belt Conveyor
Electric drive, 36" x 50". In good condition

306

4 Strand Transfer Deck
No drive, 77" x 70", rooftop chain. In good condition

307

Belt Conveyor
No drive, 10" belt, 16" x 15'9", 24" high

308

Belt Conveyor
No drive, 20" belt, 26" x 38'. Has some wear

309

Belt Conveyor
No drive, 12" belt, 17" x 26'6" x 42" high, incline. In good condition

310

Belt Conveyor
Electric drive, 23" belt, 33" x 20'8", 90" high, incline. In good condition

311

Conveyor
No drive, no belt, 28" x 16'. Rough condition

312

Belt Conveyor
No drive, 12" belt, 18" x 19'6". Has some wear

313

Live Roll Case
No drive, 48" rollers, 52" x 16'6"

314

Live Roll Case
No drive, 52" rollers, 66" x 10'

315

Live Roll Case
No drive, 52" rollers, 66" x 21'6"

316

Bull Wheels and Plates
(2) 9" x 21" wheels, (2) 20" x 22" plates

317

Belt Conveyor
No drive, 18" belt, 32" x 31" with 24" metal detector

319

Steel Table
36" x 60"

320

Lumber Cart
4' x 6' 6", missing wheel

321

Lumber Cart
6' x 4'

322

Lumber Cart
6' x 4'

323

Lumber Cart
6' x 4'

324

Lumber Cart
6' x 4'

325

Lumber Cart
7' 6" x 4'

326

Lumber Cart
6' x 4'

327

Lumber Cart
7' 6" x 4'

328

Lumber Cart
6' x 4'

329

Lumber Cart
6' x 4'

330

Lumber Cart
7' 6" x 4', missing 2 wheels

331

Lumber Cart
6' x 4'

332

Lumber Cart
6' x 4'

333

Lumber Cart
4' x 4'

334

Lumber Cart
4' x 4'

335

Lumber Cart
6' x 4', comes with pallet of extra wheels

336

Lumber Cart
6' x 4'

337

Lumber Cart
7' 6" x 4'

338

Lumber Cart
4' x 4'

339

Lumber Cart
6' x 4'

340

Lumber Cart
7' 6" x 4'

341

Lumber Cart
6' x 4', missing 1 wheels

342

Lumber Cart
6' x 4'

343

Lug Loader
Electric drive, 89" x 100", 58" high. In good condition

344

Shop Built 4 Strand Transfer Deck
8' x 15', 10' high, includes 3 belt conveyors (1) 18" x 13', (2) 8" x 160". Has some wear

345

2005 Pendu 5400 Bandsaw
SN: 0502-8618Y, electric drive, 40 hp, 15" x 124" infeed/outfeed, 36" wheels(band), 9' high. In very good condition

346

Jeffrey Top Feed Hammermill
Bottom discharge, 64" x 48", 40" high. In good condition

347

Tronco Bull Edger/Gang Saw
Top arbor, Electric drive, 75 hp, 20" infeed rollers, 6' x 92", 92" high, comes with 64" x 22" infeed. In new condition, NEVER USED!!

348

Comact Gangsaw
Model: SC4742, no drive, 24" infeed rollers, 58" x 64", 88" high

349

2012 L and M Equipment Package Cross Cut Saw
Model: HMPC-7-24, SN: 76112, electric drive, 24' long, includes 4 blades and comes with drag conveyor 25' with 9' incline.

350

RK Machinery Air Compressor
No drive, 10 hp, 120 gallons. Condition unknown

351

Webster Air Compressor
SN: 0905143, electric drive, 10 hp. Condition unknown

352

Pallet of Cylinders
Parts for Debarker

353

Electric Motor and Containers

354

Electric Motors and Gear Drive
5 hp and 1.5 hp

355

Transformer
30" x 26", 14" deep

356

Pallet of Chain and Belts
Various sizes

357

Feed Rollers and Sprockets

358

Pallet of Feed Rollers and Spacers

359

Pallet of Guards

360

Pallet of Motors and Belts

361

Pallet of Chains

362

Pallet of Motors
2 hp, 1 hp, various sizes

363

Pallet of Misc. Parts

364

Pallet of Grab Hooks

365

Pallet of Filters
Air/hydraulic/oil

366

Pallet of Hydraulic Hoses

367

Pallet of Oils and Battery
Exide battery, 15W 40 oil, Liebherr gear oil

368

2 Cylinders
Used with Liebherr log loader lot 255

369

Pallet of Belts

370

Pallet of Belts, Blades, and Gears

371

Pallet of Hydraulic Manifold
4 station

372

Pallet of Roller Cylinder and Parts

373

Pallet of Cylinders and Gears

374

Pallet of Spacers and Tire Chains
43" spacers, snow chains for Liebherr loader

375

Pallet of Chain Transfer Parts

376

Pallet of Manifolds and Gears

377

Pallet of Vallee Bull Edger Spacers
5 3/8" inside, 7 3/16" outside

378

Transformer
16" x 16" x 12 deep

379

Belt Conveyor
10" belt, 16" x 9' x 60" high

380

Belt Conveyor
13" belt, 14" x 140", incline 60" high

381

Grapple
Hydraulic, possibly for slasher lot 256

382

Saw Blade
60"

383

Saw Blade
48"

384

Saw Blade
48", 40 teeth

385

Saw Blade
48"

386

Saw Blade
48"

387

Saw Blade
48"

388

Saw Blade
48", 44 teeth

389

Pallet of Cylinders and Bull Bearings

390

Cylinder Cambio
Used on debarker

391

Berotech Automatic Knife Grinder
Model: EM60, SN: 0004140, electric drive, 600V, 3 phase. In very good condition

392

Container
8' wide x 115" high x 40' long, no contents

393

Parts for Debarker

394

Sorti Wood Working Machine
Model: R/16, SN: 0230322051 USA, Electric drive, 30 hp, 3 phase, 480V, 6" infeed belt, 6' x 102" x 100" overall. In good condition

395

SKH Chipper
Electric drive, 50 hp, top feed, bottom discharge. In good condition

396

Cardinal Edger
SN: 840-A, electric drive, 3 phase. Comes with infeed and tailing belt, 2 blades- one fixed, tailing belt 54" wide x 152" long x 10' high, infeed 48" wide x 12' long x 9' high, 3 hp, electric drive. In good condition

397

Baker Cutoff System
Model: BCO-O, SN: 95-146, electric drive, 3 head, 55" wide x 22' long x 10' high. In good condition

398

Stenner 105 Bandsaw
Model: MH510, SN: AP10047, electric drive, 5 head, pneumatic saw straining comes with feed table, 12" x 20', 13' x 21' x 13' high, 4.5" wide band wheel. In rough condition

399

Comact Maxi Tour Slasher
Model: 60, SN: 965110, electric drive, 75 hp, 72" blade, outfeed 24" belt x 15', infeed 14" belt x 10'. Has some wear

400

Wright Blade Sharpener
Model: W-150 HAD, electric drive, 3 phase, 575V

Photo Gallery

Share This Listing

Other Sales by
This Company

Jun 6
Orland, IN

Jun 11
Union City, MI

Jun 11
Various, IN

Jun 11
West Baden Springs, IN

Jun 11
Spencerville, IN

View all listings

Canada Sawmill Liquidation - Sainte-Thècle, QC G0X 3G0 (ONLINE ONLY)

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704

Sainte-Thecle, QC G0X 3G0
Full Address Available after 9 am
on Thursday, Nov 30

Friday Dec 1, 2023 Completed

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.

1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
2. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
3. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
4. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
5. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Cash payments totaling Ten Thousand Dollars ($10,000) or more will not be accepted. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.

Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyer’s account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Insurance. Any work performed by Purchaser(s) or Purchaser Representative (including sub-contractors) shall be insured and provide proof of coverage against all claims for injuries against persons or damages to property which may arise from or in connection with the removal of items or equipment. Insurance coverage requirements are as follows: General Liability $1,000,000/$2,000,000 and Worker’s Compensation $1,000,000 or as required by State Law. Seller shall be listed as additionally insured, if required.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.

Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Details
Type of Auction: Pallet cutstock operation liquidation 00 Information Lot Auction Agent: Eugene Hochstetler 574-242-1100 Highlight Pieces: Rolling stock and some newer mill equipment This auction will be online and phone only! 01 Preview & Inspection Buyers are responsible to do their own inspection to determine the condition of the items they purchase. Inspections times are available as follows: Week of auction from 8 AM to 4 PM or by appointment. Location of Auction: 631 Rue Notre Dame, Sainte-Thècle, QC G0X 3G0 02 Loadout Information International logistics from CN to the US are available 03 Payment Information Payment terms: All items are subject Quebec Sales Tax 14.975%. All payments will need to be in US funds. 13% Online Buyer's Premium in effect for all purchases. Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. 04 CAT 390F L Hydraulic Excavator 1:50 Scale Replica - Die Cast Metal Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 98 Heavy Equipment Key Set 36 Keys Shipping available for $20 99 Manual Sealless Steel Strapping Tool Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30 100 Piche 4 Strand Log Deck (1st of an entirety) SN: 0902094011936, 10' x 31'8", 10' high. Has side shield, electric drive, 3 phase. In good condition 101 4 Strand Transfer Deck (Part of an entirety) Electric drive, 13' x 21'5", 7' high, electric drive. In good condition 102 Step Feeder (Part of an entirety) Electric drive, dual action, 20'8" wide x 9', 10' high, 5 step. In good condition 103 Waste Conveyor under Debarker (Part of an entirety) Electric drive, 24" x 62' long, 5' high. In good condition 104 Waste Elevator (Part of an entirety) Electric drive, approx. 46' long x 32" wide, approx. 25' high. In good condition 105 Log Trough (Part of an entirety) Electric drive, 36" x 19' 106 30" Cambio Soderhamn Debarker (Part of an entirety) Feeder for log and turner, electric drive, 6 arm, 26" roller feeders, catwalk surrounding and over debarker, includes steel structure around debarker. In good condition 107 Debarker Cab and Controls (Part of an entirety) 6' x 6' cab, AC, 2 sided. In good condition 107A Debarker Entirety of Lots 100-107 With 10% raise. 108 Electric Panels for Debarker 4 panels, 3' x 4' x 13" depth, 2' x 30" x 11" depth, 3' x 42" x 15" depth, 24" x 36" x 10" depth. 109 Outside Catwalk and Stairs Leading to Debarker 8' x 80". In good condition 110 Hourglass Roll Case Electric drive, 31' long x 32" wide, 21" sides, includes structure to floor. In good condition 111 Catwalk and Stairs Beside the transfer deck leading to Scragg, 32' long x 72" wide. In good condition 112 4 Strand Transfer Deck (1st of an entirety) Electric drive, 112" x 26', leading to Scragg, includes side shield and structure to the floor. In good condition 113 4 Strand Unscrambler (Part of an entirety) Electric drive, 103" x 104". In good condition 114 Twin PHL Scragg Mill (Part of an entirety) Electric drive, includes log trough infeed and outfeed, 48" blades, 80" wide x 47' long, includes structure to floor and catwalks on both sides. In good condition 115 Scragg Cab and Controls (Part of an entirety) 45" x 69" x 86" high, includes structure to floor, has AC 116 Control Panels for Scragg (Part of an entirety) 48" wide x 60" high x 20" deep, 2' x 3' x 9" deep 117 Hydraulic Pack (Part of an entirety) Electric drive, Feeds infeed for Scragg, includes radiator, 24" x 40" 118 Scragg Entirety of Lots 112-117 With 10% raise. 119 Belt Waste Conveyor Electric drive, 22' x 20" wide, includes slide pans under Scragg 120 Dust Blower Electric drive, 12" 121 Belt Waste Conveyor Electric drive, 56' long x 24" wide, includes slide pans 122 Drop Belt Conveyor Hydraulic drive, 14" x 102" 123 Drop Belt Conveyor Hydraulic drive, 14" x 102". In good condition 124 48" Blade 38 teeth, for Scragg. In good condition 125 48" Blade 38 teeth, for Scragg. In good condition 126 Scrap Conveyor No drive,6" wide x 13' long. In good condition 127 6 Strand Transfer Deck Electric drive, 10'6" wide x 14'5" long, includes structure to ground. In good condition 128 Valley Bull Edger Top arbor, Electric drive, (2) bay, (2) 75 hp motors, includes shut offs, includes 56" x 8 infeed, controls, 20" and 24" bays, tailing belts, 20' outfeed, structure, and catwalks surrounding 129 Hydraulic Pack Electric drive, 2' x 47". In good condition 130 Comact Resaw 75 hp electric drive, includes controls. 130A Blades for Edger 6 total blades, diameter 16", center hole 3.243", 32 teeth, blades fit lot 130 131 Comact Bull Edger Double arbor, 125 and 150 hp electric drive, includes shut off and controls, 52" x 9' infeed, 30" and 16" bays, catwalk and structure to ground. In good condition 131A New Blades for Bull Edger 20 or more blades, diameter 14", center hole 5 1/2", 16 teeth, blades fit lot 131 132 Edger Spacers 2 boxes, for edger on lot 131 133 Electrical Control Box 36" x 60" x 13 deep, used for edger 134 Belt Conveyor Electric drive, 112" x 21" includes sides 27" high 135 Live Roll Case Electric drive, 5 rolls are spiral, 54" wide x 19'7" long, includes surrounding steel structure to floor 136 7 Strand Transfer Deck Electric drive, 10' wide x 99" long, includes surrounding steel structure to floor 137 Belt Conveyor Electric drive, 19" wide x 20'9" long, 4" sides 138 Belt Conveyor Electric drive, 24" wide x 24' long, 5 1/2" sides, includes covers. 139 Belt Conveyor Electric drive, 48" x 16', includes all covers 140 Belt Conveyor Electric drive, 48" x 104", no sides 141 5 Strand Transfer Deck Electric drive, 9' wide x 23'3" long 142 Deck Board Trimmer Electric drive, 3 blades, 64" deep x 116" wide x 46" high, 4 strand, slide pans to belt conveyor included, steel structure to ground 143 Control Box 30" x 36" x 9" deep, used with trimmer 144 Catwalk and Stairs Surrounding trimmers 145 Turn Table Electric drive, 6' 146 Belt Conveyor Electric drive, 20" wide x 17'8" long, 6" sides 147 Belt Conveyor Electric drive, 20" wide x 17'8" long, 6" sides 148 4 Strand Transfer Deck Electric drive, 80" wide x 33' long 149 Belt Conveyor Electric drive, 20" wide x 33' long, 6" sides 150 Morbark Chippac (1st of an entirety) Electric drive, UPDATE! 58", 3 knives, includes pipe to cyclone and shutoff, 125 hp 151 Cyclone (Part of an entirety) 64" diameter, 64" high 152 Shaker Screen (Part of an entirety) Electric drive, 84" x 84", 3 phase, 7.5 hp, 115" x 7" box, includes steel structure to ground 153 Chipper Entirety of Lots 150-152 With 10% raise. 154 General Dust Blower Electric drive, 16", includes infeed pipe, 10 hp 155 Belt Conveyor Electric drive, 18" belt, 3 phase 2 hp, 24" wide x 118" long 156 Webster Vibrating Conveyor LOT 157 SELLS WITH THIS LOT. Electric drive, 10 hp, 18" wide bottom 30" top sides, 84' long, feeds into chipper 157 Metal Detector SELLS WITH LOT 156. 36" long, 9" sides, 18" wide bottom 34" top sides. Is in vibrating conveyor 158 Belt Conveyor Electric drive, 1.5 hp, 32" wide x 12' long, 5" sides, on incline 159 Belt Conveyor Electric drive, 3 hp, 8' wide x 17' long on incline, includes slide plates and steel structure to ground 160 Belt Conveyor Electric drive, 2 hp, 36" belt, 40" wide x 10' long on incline under Comact edger 161 Hydraulic Pack Electric drive, 20 hp, 10" wide x 65" long x 19" high 162 Belt Conveyor Electric drive, 7.5 hp, 18" belt, 18" wide bottom and 32" top sides x 43' long leaving edger 163 Catwalk and Steps 3' high, beside lot 162 164 5 Strand Unscrambler No drive, 110" wide x 80" deep x 6' high, includes drum drive with 18" drive 165 3 Blade Trimmer Electric drive, 9' wide x 9'6" long, includes steel structure to ground, 4 strand, used for slabs 166 Belt Conveyor Electric drive, 2 hp, 12" wide x 15' long, on incline with 4" sides 167 Belt Conveyor Electric drive, 8 1/2" wide x 20'6" long, 7" sides 168 3 Strand Transfer Deck Electric drive, 2 hp, 38" wide x 15' long x 32" high 169 2019 YCDM G300 Horizontal Resaw Electric drive, 8" wide, 2" blade, 17'6" infeed belt, on wheels, complete with hydraulic pack, with return, 102" overall width. Almost new condition 170 Belt Conveyor Electric drive, 1/2 hp, 6" belt, 2" sides x 12" wide x 31' long, 20" high with adjustable legs 171 Transformer Used with resaw 172 New Blades For lot 169, approx. 30 or more 173 Atlas Copco Air Compressor Model: GA22, SN: A11240065, 30 hp. In good condition 174 Electrical Control Box 20" x 20" x 9" deep. Used for the resaw line. In good condition 175 Sullair Air Compressor Model: ES-8, SN: 003-1212, electric drive, 25 hp. In good condition 176 Parker Air Dryer SN: 3853550002. In good condition 177 Excel Pro Electrical Box 5' x 5' x 17" deep with legs 178 Electrical Control Box 36" x 60" x 13" deep 179 Electrical Control Box 35" x 30" x 12" deep 181 Electrical Control Panel 36" x 48" x 13 deep. Has display screen 182 Electrical Control Panel 16" x 14" x 6" deep 183 2015 6 Strand Cardinal Trimmer Electric drive, 18" belt, 6 blades, 116" wide x 12' long, includes steel structure to ground, safety guards, & scrap conveyor underneath 183A Blades for Cardinal Trimsaw 10 or more blades, 2 different sizes. Size 1: diameter 22", center hole 1.471", 85 teeth. Size 2: diameter 25 3/4", center hole 1.471", 120 teeth. Blades fit lot 183 184 Belt Conveyor Electric drive, 5 hp, 66" belt, 7' wide x 20'10" long, includes slide pans on incline, 54" high 185 Belt Conveyor Electric drive, 12" belt, 20" wide x 32' long, 5" sides 186 Chip Chain Drag Conveyor Electric drive, 16" wide, approx. 30' long on incline, with hopper 187 Belt Conveyor Electric drive, elevated, 16" wide, with catwalk and steel structure to the ground, approx. 85' long, 15' elevated 188 Concept-Air Dust Collector Silo (1st of an entirety) Electric drive dispenser, 3 hp, approx. 30' high, 10' diameter, with access ladder, includes disconnects 188A Bags for Dust Collector (Part of an entirety) Used with lot 188 189 Concept-Air Blower (Part of an entirety) Model: HDJ 24, SN: 1503191V1, 75 hp, 60" blower, includes disconnect 190 All Outside Pipe (Part of an entirety) 26" pipe 191 Concept-Air Dust Collector Entirety of Lots 188-190 With 10% raise. 192 Dust Drag Chain Conveyor Electric drive, 16" wide x approx. 55' long, 8" sides 193 All Dust Pipe Insider Various sizes 12" - 26", includes 2 racks of pipe and fittings, outside by dust collector 194 Hansen Tek Fire Suppression Control Box Model: AN104, SN: 3234, for dust collector system. 195 4 Strand Green Chain Electric drive, 5 hp, 85" wide x 53' long, 32" 'high. In very good condition 196 3 Strand Transfer Deck Electric drive, 78" wide x 36' long, 30" tall 197 Pendu Stacker Model: 4600E, SN: 1564, scissor lift type 198 2 Strand Transfer Deck 40" wide x 17'6" long, hydraulic drive 199 Hydraulic Pack Electric drive, 20 hp, 24" x 35' x 13", with radiator. Used with Pendu stacker 200 Baker 4 Section Lumber Stacking Rack 7' x 7' x 57" high 201 ABF Belt Conveyor Electric drive, 36" x 48" long 201A Electrical Control Box 20" x 30" x 10" deep 202 4 Strand Board Unscrambler Electric drive, 2 hp, 9' wide x 45" deep x 58" high, adjustable 203 3 Strand Transfer Deck Electric drive, 3 hp, 40" x 18' x 30" high, rooftop chain 204 90 Degree Transfer Deck Electric drive, 3 strand, 37" wide x 80" x 36" high 205 3 Strand Transfer Deck Electric drive, 3 hp, 40" x 26' long x 36" high, rooftop chain 206 3 Strand Transfer Deck Electric drive, 43" wide x 17'8" long x 34" high 207 Permo Dome Hoop Building NEW IN 2020!! 60' x 120' x 30' high approximately. Doesn't include doors or Big Ass fan. Sells with cement blocks 208 Brown and Sharp Cutter and Tool Grinding Machine SN: 525-10-115 209 Knife Sharpening Machine 210 Feeder Arm for Debarker Goes with lot 106 250 2019 Liebherr Wheel Loader Model: L556, SN: VATZ1332CZB046617, Meter reads 7287 hrs., has forestry package, 188 hp, enclosed cab with heat/AC, joystick controls, backup camera, radio, power lift engine bay, fire suppression system. Great running machine! Bucket is not included. 251 Vallee Log Grapple Model: V25-5050-840, SN: 97F 0903, 4000 lbs., 69" wide, for loader 252 H and H Trash Bucket 9'6" wide, for loader 253 Loader Bucket 104" wide 254 1990 Komatsu Mini Excavator Model: PC28UU, SN: 4871, meter reads: 3389 hours, Has an Articulating Boom, Diesel engine, 34" bucket, open cab 255 2009 Liebherr Log Loader Model: 924C, SN: 5353, Self-propelled, meter show 10,550 hrs, 180 hp engine, Forestry package, enclosed cab, heat & air, joystick controls, tilt steering, good tires, good clean working machine 255A 3 Tires for Liebherr Log Loader 12.00-20 NHS, fits lot 255 256 1997 Hood Slasher Model: 24000, SN: H245302H01293, self propelled, 8' folding deck, meter reads: 3802 hours, enclosed cab, continuous swivel grapple, no heat/AC, has Joystick controls, John Deere engine (2439 hours), 60" blade, has several hydraulic leaks, Runs Good! 257 Pup Trailer 23' bunk, 31' overall, 8' wide, pintle hitch, no lights. No title, bill of sale only 257A 3 Tires 11R22.5, fits lot 257 pup trailer general tire 258 1987 Manac Van Trailer Model: 90248101, VIN: 2M5921469H1016895, office trailer, 48' long. Has security system, refrigerator, landing steps, heat/AC. No controls, Used for lunchroom 259 Storage Container Model: TMG-SC09, SN: SC0900146, 1 single door and 1 double door, 9' x 7' x 98' high, 1 window, no contents, floor rot inside door 260 Tanguay Stationary Loader Model: PL 150, meter reads: 17819 hours, lift capacity: 27000 lbs., 39' reach, all electric 125 hp, swivel base has been rebuilt, no grapple, enclosed cab with heat/AC, Joystick controls. Base 23' x 13'. In good condition 261 Clark Forklift Model: CMP40D, SN: CMP405D0349-6877KF, meter reads: 6860 hours, 30 hours on new engine, single stage, 8' mast, 5' forks, has side shift, enclosed cab with heat, diesel engine, dual front wheels, 12' reach height 300 Belt Conveyor 36" x 48", no drive 301 Scissor Lift Hydraulic cylinder, 82" x 50" 302 Transfer Deck 11'7" x 58", no drive 303 4 Strand Transfer Deck No drive, 18'3" x 68". In rough condition 304 5 Strand Transfer Deck Electric drive, 102" x 17', 42" high, H78 chain. In good condition 305 Belt Conveyor Electric drive, 36" x 50". In good condition 306 4 Strand Transfer Deck No drive, 77" x 70", rooftop chain. In good condition 307 Belt Conveyor No drive, 10" belt, 16" x 15'9", 24" high 308 Belt Conveyor No drive, 20" belt, 26" x 38'. Has some wear 309 Belt Conveyor No drive, 12" belt, 17" x 26'6" x 42" high, incline. In good condition 310 Belt Conveyor Electric drive, 23" belt, 33" x 20'8", 90" high, incline. In good condition 311 Conveyor No drive, no belt, 28" x 16'. Rough condition 312 Belt Conveyor No drive, 12" belt, 18" x 19'6". Has some wear 313 Live Roll Case No drive, 48" rollers, 52" x 16'6" 314 Live Roll Case No drive, 52" rollers, 66" x 10' 315 Live Roll Case No drive, 52" rollers, 66" x 21'6" 316 Bull Wheels and Plates (2) 9" x 21" wheels, (2) 20" x 22" plates 317 Belt Conveyor No drive, 18" belt, 32" x 31" with 24" metal detector 319 Steel Table 36" x 60" 320 Lumber Cart 4' x 6' 6", missing wheel 321 Lumber Cart 6' x 4' 322 Lumber Cart 6' x 4' 323 Lumber Cart 6' x 4' 324 Lumber Cart 6' x 4' 325 Lumber Cart 7' 6" x 4' 326 Lumber Cart 6' x 4' 327 Lumber Cart 7' 6" x 4' 328 Lumber Cart 6' x 4' 329 Lumber Cart 6' x 4' 330 Lumber Cart 7' 6" x 4', missing 2 wheels 331 Lumber Cart 6' x 4' 332 Lumber Cart 6' x 4' 333 Lumber Cart 4' x 4' 334 Lumber Cart 4' x 4' 335 Lumber Cart 6' x 4', comes with pallet of extra wheels 336 Lumber Cart 6' x 4' 337 Lumber Cart 7' 6" x 4' 338 Lumber Cart 4' x 4' 339 Lumber Cart 6' x 4' 340 Lumber Cart 7' 6" x 4' 341 Lumber Cart 6' x 4', missing 1 wheels 342 Lumber Cart 6' x 4' 343 Lug Loader Electric drive, 89" x 100", 58" high. In good condition 344 Shop Built 4 Strand Transfer Deck 8' x 15', 10' high, includes 3 belt conveyors (1) 18" x 13', (2) 8" x 160". Has some wear 345 2005 Pendu 5400 Bandsaw SN: 0502-8618Y, electric drive, 40 hp, 15" x 124" infeed/outfeed, 36" wheels(band), 9' high. In very good condition 346 Jeffrey Top Feed Hammermill Bottom discharge, 64" x 48", 40" high. In good condition 347 Tronco Bull Edger/Gang Saw Top arbor, Electric drive, 75 hp, 20" infeed rollers, 6' x 92", 92" high, comes with 64" x 22" infeed. In new condition, NEVER USED!! 348 Comact Gangsaw Model: SC4742, no drive, 24" infeed rollers, 58" x 64", 88" high 349 2012 L and M Equipment Package Cross Cut Saw Model: HMPC-7-24, SN: 76112, electric drive, 24' long, includes 4 blades and comes with drag conveyor 25' with 9' incline. 350 RK Machinery Air Compressor No drive, 10 hp, 120 gallons. Condition unknown 351 Webster Air Compressor SN: 0905143, electric drive, 10 hp. Condition unknown 352 Pallet of Cylinders Parts for Debarker 353 Electric Motor and Containers 354 Electric Motors and Gear Drive 5 hp and 1.5 hp 355 Transformer 30" x 26", 14" deep 356 Pallet of Chain and Belts Various sizes 357 Feed Rollers and Sprockets 358 Pallet of Feed Rollers and Spacers 359 Pallet of Guards 360 Pallet of Motors and Belts 361 Pallet of Chains 362 Pallet of Motors 2 hp, 1 hp, various sizes 363 Pallet of Misc. Parts 364 Pallet of Grab Hooks 365 Pallet of Filters Air/hydraulic/oil 366 Pallet of Hydraulic Hoses 367 Pallet of Oils and Battery Exide battery, 15W 40 oil, Liebherr gear oil 368 2 Cylinders Used with Liebherr log loader lot 255 369 Pallet of Belts 370 Pallet of Belts, Blades, and Gears 371 Pallet of Hydraulic Manifold 4 station 372 Pallet of Roller Cylinder and Parts 373 Pallet of Cylinders and Gears 374 Pallet of Spacers and Tire Chains 43" spacers, snow chains for Liebherr loader 375 Pallet of Chain Transfer Parts 376 Pallet of Manifolds and Gears 377 Pallet of Vallee Bull Edger Spacers 5 3/8" inside, 7 3/16" outside 378 Transformer 16" x 16" x 12 deep 379 Belt Conveyor 10" belt, 16" x 9' x 60" high 380 Belt Conveyor 13" belt, 14" x 140", incline 60" high 381 Grapple Hydraulic, possibly for slasher lot 256 382 Saw Blade 60" 383 Saw Blade 48" 384 Saw Blade 48", 40 teeth 385 Saw Blade 48" 386 Saw Blade 48" 387 Saw Blade 48" 388 Saw Blade 48", 44 teeth 389 Pallet of Cylinders and Bull Bearings 390 Cylinder Cambio Used on debarker 391 Berotech Automatic Knife Grinder Model: EM60, SN: 0004140, electric drive, 600V, 3 phase. In very good condition 392 Container 8' wide x 115" high x 40' long, no contents 393 Parts for Debarker 394 Sorti Wood Working Machine Model: R/16, SN: 0230322051 USA, Electric drive, 30 hp, 3 phase, 480V, 6" infeed belt, 6' x 102" x 100" overall. In good condition 395 SKH Chipper Electric drive, 50 hp, top feed, bottom discharge. In good condition 396 Cardinal Edger SN: 840-A, electric drive, 3 phase. Comes with infeed and tailing belt, 2 blades- one fixed, tailing belt 54" wide x 152" long x 10' high, infeed 48" wide x 12' long x 9' high, 3 hp, electric drive. In good condition 397 Baker Cutoff System Model: BCO-O, SN: 95-146, electric drive, 3 head, 55" wide x 22' long x 10' high. In good condition 398 Stenner 105 Bandsaw Model: MH510, SN: AP10047, electric drive, 5 head, pneumatic saw straining comes with feed table, 12" x 20', 13' x 21' x 13' high, 4.5" wide band wheel. In rough condition 399 Comact Maxi Tour Slasher Model: 60, SN: 965110, electric drive, 75 hp, 72" blade, outfeed 24" belt x 15', infeed 14" belt x 10'. Has some wear 400 Wright Blade Sharpener Model: W-150 HAD, electric drive, 3 phase, 575V

Close X

Gallery Images Loading, Please Wait...

Close X

Save this sale to your Saved Sales list!

Your Saved Sales list is an easy way to return to sale listings which are of interest to you.

Login

Username:

Password:

Sign Up

FREE EMAIL NOTIFICATIONS
auction listings delivered to your inbox

Close X

Sign Up

FREE EMAIL NOTIFICATIONS
auction listings delivered to your inbox

Login

Username:

Password:

Return

Canada Sawmill Liquidation - Sainte-Thècle, QC G0X 3G0 (ONLINE ONLY)

Live Auction

View Gallery (237)

Auction Date(s)

Friday Dec 1, 2023 Completed

Auction Location

Sainte-Thecle, QC G0X 3G0
Full Address Available on Thursday, Nov 30

Company

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Website: brightstarauctions.com

Listing Terms and Conditions

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.

1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
2. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
3. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
4. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
5. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Cash payments totaling Ten Thousand Dollars ($10,000) or more will not be accepted. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.

Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyer’s account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Insurance. Any work performed by Purchaser(s) or Purchaser Representative (including sub-contractors) shall be insured and provide proof of coverage against all claims for injuries against persons or damages to property which may arise from or in connection with the removal of items or equipment. Insurance coverage requirements are as follows: General Liability $1,000,000/$2,000,000 and Worker’s Compensation $1,000,000 or as required by State Law. Seller shall be listed as additionally insured, if required.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.

Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Type of Auction: Pallet cutstock operation liquidation

Information Lot
Auction Agent: Eugene Hochstetler 574-242-1100
Highlight Pieces: Rolling stock and some newer mill equipment

This auction will be online and phone only!

Loadout Information
International logistics from CN to the US are available

Heavy Equipment Key Set 36 Keys
Shipping available for $20

Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

100

Piche 4 Strand Log Deck
(1st of an entirety) SN: 0902094011936, 10' x 31'8", 10' high. Has side shield, electric drive, 3 phase. In good condition

101

4 Strand Transfer Deck
(Part of an entirety) Electric drive, 13' x 21'5", 7' high, electric drive. In good condition

102

Step Feeder
(Part of an entirety) Electric drive, dual action, 20'8" wide x 9', 10' high, 5 step. In good condition

103

Waste Conveyor under Debarker
(Part of an entirety) Electric drive, 24" x 62' long, 5' high. In good condition

104

Waste Elevator
(Part of an entirety) Electric drive, approx. 46' long x 32" wide, approx. 25' high. In good condition

105

Log Trough
(Part of an entirety) Electric drive, 36" x 19'

106

107

Debarker Cab and Controls
(Part of an entirety) 6' x 6' cab, AC, 2 sided. In good condition

107A

Debarker Entirety of Lots 100-107
With 10% raise.

108

Electric Panels for Debarker
4 panels, 3' x 4' x 13" depth, 2' x 30" x 11" depth, 3' x 42" x 15" depth, 24" x 36" x 10" depth.

109

Outside Catwalk and Stairs Leading to Debarker
8' x 80". In good condition

110

Hourglass Roll Case
Electric drive, 31' long x 32" wide, 21" sides, includes structure to floor. In good condition

111

Catwalk and Stairs
Beside the transfer deck leading to Scragg, 32' long x 72" wide. In good condition

112

4 Strand Transfer Deck
(1st of an entirety) Electric drive, 112" x 26', leading to Scragg, includes side shield and structure to the floor. In good condition

113

4 Strand Unscrambler
(Part of an entirety) Electric drive, 103" x 104". In good condition

114

115

Scragg Cab and Controls
(Part of an entirety) 45" x 69" x 86" high, includes structure to floor, has AC

116

Control Panels for Scragg
(Part of an entirety) 48" wide x 60" high x 20" deep, 2' x 3' x 9" deep

117

Hydraulic Pack
(Part of an entirety) Electric drive, Feeds infeed for Scragg, includes radiator, 24" x 40"

118

Scragg Entirety of Lots 112-117
With 10% raise.

119

Belt Waste Conveyor
Electric drive, 22' x 20" wide, includes slide pans under Scragg

120

Dust Blower
Electric drive, 12"

121

Belt Waste Conveyor
Electric drive, 56' long x 24" wide, includes slide pans

122

Drop Belt Conveyor
Hydraulic drive, 14" x 102"

123

Drop Belt Conveyor
Hydraulic drive, 14" x 102". In good condition

124

48" Blade
38 teeth, for Scragg. In good condition

125

48" Blade
38 teeth, for Scragg. In good condition

126

Scrap Conveyor
No drive,6" wide x 13' long. In good condition

127

6 Strand Transfer Deck
Electric drive, 10'6" wide x 14'5" long, includes structure to ground. In good condition

128

129

Hydraulic Pack
Electric drive, 2' x 47". In good condition

130

Comact Resaw
75 hp electric drive, includes controls.

130A

Blades for Edger
6 total blades, diameter 16", center hole 3.243", 32 teeth, blades fit lot 130

131

Comact Bull Edger
Double arbor, 125 and 150 hp electric drive, includes shut off and controls, 52" x 9' infeed, 30" and 16" bays, catwalk and structure to ground. In good condition

131A

New Blades for Bull Edger
20 or more blades, diameter 14", center hole 5 1/2", 16 teeth, blades fit lot 131

132

Edger Spacers
2 boxes, for edger on lot 131

133

Electrical Control Box
36" x 60" x 13 deep, used for edger

134

Belt Conveyor
Electric drive, 112" x 21" includes sides 27" high

135

Live Roll Case
Electric drive, 5 rolls are spiral, 54" wide x 19'7" long, includes surrounding steel structure to floor

136

7 Strand Transfer Deck
Electric drive, 10' wide x 99" long, includes surrounding steel structure to floor

137

Belt Conveyor
Electric drive, 19" wide x 20'9" long, 4" sides

138

Belt Conveyor
Electric drive, 24" wide x 24' long, 5 1/2" sides, includes covers.

139

Belt Conveyor
Electric drive, 48" x 16', includes all covers

140

Belt Conveyor
Electric drive, 48" x 104", no sides

141

5 Strand Transfer Deck
Electric drive, 9' wide x 23'3" long

142

Deck Board Trimmer
Electric drive, 3 blades, 64" deep x 116" wide x 46" high, 4 strand, slide pans to belt conveyor included, steel structure to ground

143

Control Box
30" x 36" x 9" deep, used with trimmer

144

Catwalk and Stairs
Surrounding trimmers

145

Turn Table
Electric drive, 6'

146

Belt Conveyor
Electric drive, 20" wide x 17'8" long, 6" sides

147

Belt Conveyor
Electric drive, 20" wide x 17'8" long, 6" sides

148

4 Strand Transfer Deck
Electric drive, 80" wide x 33' long

149

Belt Conveyor
Electric drive, 20" wide x 33' long, 6" sides

150

Morbark Chippac
(1st of an entirety) Electric drive, UPDATE! 58", 3 knives, includes pipe to cyclone and shutoff, 125 hp

151

Cyclone
(Part of an entirety) 64" diameter, 64" high

152

Shaker Screen
(Part of an entirety) Electric drive, 84" x 84", 3 phase, 7.5 hp, 115" x 7" box, includes steel structure to ground

153

Chipper Entirety of Lots 150-152
With 10% raise.

154

General Dust Blower
Electric drive, 16", includes infeed pipe, 10 hp

155

Belt Conveyor
Electric drive, 18" belt, 3 phase 2 hp, 24" wide x 118" long

156

Webster Vibrating Conveyor
LOT 157 SELLS WITH THIS LOT. Electric drive, 10 hp, 18" wide bottom 30" top sides, 84' long, feeds into chipper

157

Metal Detector
SELLS WITH LOT 156. 36" long, 9" sides, 18" wide bottom 34" top sides. Is in vibrating conveyor

158

Belt Conveyor
Electric drive, 1.5 hp, 32" wide x 12' long, 5" sides, on incline

159

Belt Conveyor
Electric drive, 3 hp, 8' wide x 17' long on incline, includes slide plates and steel structure to ground

160

Belt Conveyor
Electric drive, 2 hp, 36" belt, 40" wide x 10' long on incline under Comact edger

161

Hydraulic Pack
Electric drive, 20 hp, 10" wide x 65" long x 19" high

162

Belt Conveyor
Electric drive, 7.5 hp, 18" belt, 18" wide bottom and 32" top sides x 43' long leaving edger

163

Catwalk and Steps
3' high, beside lot 162

164

5 Strand Unscrambler
No drive, 110" wide x 80" deep x 6' high, includes drum drive with 18" drive

165

3 Blade Trimmer
Electric drive, 9' wide x 9'6" long, includes steel structure to ground, 4 strand, used for slabs

166

Belt Conveyor
Electric drive, 2 hp, 12" wide x 15' long, on incline with 4" sides

167

Belt Conveyor
Electric drive, 8 1/2" wide x 20'6" long, 7" sides

168

3 Strand Transfer Deck
Electric drive, 2 hp, 38" wide x 15' long x 32" high

169

2019 YCDM G300 Horizontal Resaw
Electric drive, 8" wide, 2" blade, 17'6" infeed belt, on wheels, complete with hydraulic pack, with return, 102" overall width. Almost new condition

170

Belt Conveyor
Electric drive, 1/2 hp, 6" belt, 2" sides x 12" wide x 31' long, 20" high with adjustable legs

171

Transformer
Used with resaw

172

New Blades
For lot 169, approx. 30 or more

173

Atlas Copco Air Compressor
Model: GA22, SN: A11240065, 30 hp. In good condition

174

Electrical Control Box
20" x 20" x 9" deep. Used for the resaw line. In good condition

175

Sullair Air Compressor
Model: ES-8, SN: 003-1212, electric drive, 25 hp. In good condition

176

Parker Air Dryer
SN: 3853550002. In good condition

177

Excel Pro Electrical Box
5' x 5' x 17" deep with legs

178

Electrical Control Box
36" x 60" x 13" deep

179

Electrical Control Box
35" x 30" x 12" deep

181

Electrical Control Panel
36" x 48" x 13 deep. Has display screen

182

Electrical Control Panel
16" x 14" x 6" deep

183

2015 6 Strand Cardinal Trimmer
Electric drive, 18" belt, 6 blades, 116" wide x 12' long, includes steel structure to ground, safety guards, & scrap conveyor underneath

183A

Blades for Cardinal Trimsaw
10 or more blades, 2 different sizes. Size 1: diameter 22", center hole 1.471", 85 teeth. Size 2: diameter 25 3/4", center hole 1.471", 120 teeth. Blades fit lot 183

184

Belt Conveyor
Electric drive, 5 hp, 66" belt, 7' wide x 20'10" long, includes slide pans on incline, 54" high

185

Belt Conveyor
Electric drive, 12" belt, 20" wide x 32' long, 5" sides

186

Chip Chain Drag Conveyor
Electric drive, 16" wide, approx. 30' long on incline, with hopper

187

Belt Conveyor
Electric drive, elevated, 16" wide, with catwalk and steel structure to the ground, approx. 85' long, 15' elevated

188

Concept-Air Dust Collector Silo
(1st of an entirety) Electric drive dispenser, 3 hp, approx. 30' high, 10' diameter, with access ladder, includes disconnects

188A

Bags for Dust Collector
(Part of an entirety) Used with lot 188

189

Concept-Air Blower
(Part of an entirety) Model: HDJ 24, SN: 1503191V1, 75 hp, 60" blower, includes disconnect

190

All Outside Pipe
(Part of an entirety) 26" pipe

191

Concept-Air Dust Collector Entirety of Lots 188-190
With 10% raise.

192

Dust Drag Chain Conveyor
Electric drive, 16" wide x approx. 55' long, 8" sides

193

All Dust Pipe Insider
Various sizes 12" - 26", includes 2 racks of pipe and fittings, outside by dust collector

194

Hansen Tek Fire Suppression Control Box
Model: AN104, SN: 3234, for dust collector system.

195

4 Strand Green Chain
Electric drive, 5 hp, 85" wide x 53' long, 32" 'high. In very good condition

196

3 Strand Transfer Deck
Electric drive, 78" wide x 36' long, 30" tall

197

Pendu Stacker
Model: 4600E, SN: 1564, scissor lift type

198

2 Strand Transfer Deck
40" wide x 17'6" long, hydraulic drive

199

Hydraulic Pack
Electric drive, 20 hp, 24" x 35' x 13", with radiator. Used with Pendu stacker

200

Baker 4 Section Lumber Stacking Rack
7' x 7' x 57" high

201

ABF Belt Conveyor
Electric drive, 36" x 48" long

201A

Electrical Control Box
20" x 30" x 10" deep

202

4 Strand Board Unscrambler
Electric drive, 2 hp, 9' wide x 45" deep x 58" high, adjustable

203

3 Strand Transfer Deck
Electric drive, 3 hp, 40" x 18' x 30" high, rooftop chain

204

90 Degree Transfer Deck
Electric drive, 3 strand, 37" wide x 80" x 36" high

205

3 Strand Transfer Deck
Electric drive, 3 hp, 40" x 26' long x 36" high, rooftop chain

206

3 Strand Transfer Deck
Electric drive, 43" wide x 17'8" long x 34" high

207

Permo Dome Hoop Building
NEW IN 2020!! 60' x 120' x 30' high approximately. Doesn't include doors or Big Ass fan. Sells with cement blocks

208

Brown and Sharp Cutter and Tool Grinding Machine
SN: 525-10-115

209

Knife Sharpening Machine

210

Feeder Arm for Debarker
Goes with lot 106

250

251

Vallee Log Grapple
Model: V25-5050-840, SN: 97F 0903, 4000 lbs., 69" wide, for loader

252

H and H Trash Bucket
9'6" wide, for loader

253

Loader Bucket
104" wide

254

1990 Komatsu Mini Excavator
Model: PC28UU, SN: 4871, meter reads: 3389 hours, Has an Articulating Boom, Diesel engine, 34" bucket, open cab

255

255A

3 Tires for Liebherr Log Loader
12.00-20 NHS, fits lot 255

256

257

Pup Trailer
23' bunk, 31' overall, 8' wide, pintle hitch, no lights. No title, bill of sale only

257A

3 Tires
11R22.5, fits lot 257 pup trailer general tire

258

1987 Manac Van Trailer
Model: 90248101, VIN: 2M5921469H1016895, office trailer, 48' long. Has security system, refrigerator, landing steps, heat/AC. No controls, Used for lunchroom

259

Storage Container
Model: TMG-SC09, SN: SC0900146, 1 single door and 1 double door, 9' x 7' x 98' high, 1 window, no contents, floor rot inside door

260

261

300

Belt Conveyor
36" x 48", no drive

301

Scissor Lift
Hydraulic cylinder, 82" x 50"

302

Transfer Deck
11'7" x 58", no drive

303

4 Strand Transfer Deck
No drive, 18'3" x 68". In rough condition

304

5 Strand Transfer Deck
Electric drive, 102" x 17', 42" high, H78 chain. In good condition

305

Belt Conveyor
Electric drive, 36" x 50". In good condition

306

4 Strand Transfer Deck
No drive, 77" x 70", rooftop chain. In good condition

307

Belt Conveyor
No drive, 10" belt, 16" x 15'9", 24" high

308

Belt Conveyor
No drive, 20" belt, 26" x 38'. Has some wear

309

Belt Conveyor
No drive, 12" belt, 17" x 26'6" x 42" high, incline. In good condition

310

Belt Conveyor
Electric drive, 23" belt, 33" x 20'8", 90" high, incline. In good condition

311

Conveyor
No drive, no belt, 28" x 16'. Rough condition

312

Belt Conveyor
No drive, 12" belt, 18" x 19'6". Has some wear

313

Live Roll Case
No drive, 48" rollers, 52" x 16'6"

314

Live Roll Case
No drive, 52" rollers, 66" x 10'

315

Live Roll Case
No drive, 52" rollers, 66" x 21'6"

316

Bull Wheels and Plates
(2) 9" x 21" wheels, (2) 20" x 22" plates

317

Belt Conveyor
No drive, 18" belt, 32" x 31" with 24" metal detector

319

Steel Table
36" x 60"

320

Lumber Cart
4' x 6' 6", missing wheel

321

Lumber Cart
6' x 4'

322

Lumber Cart
6' x 4'

323

Lumber Cart
6' x 4'

324

Lumber Cart
6' x 4'

325

Lumber Cart
7' 6" x 4'

326

Lumber Cart
6' x 4'

327

Lumber Cart
7' 6" x 4'

328

Lumber Cart
6' x 4'

329

Lumber Cart
6' x 4'

330

Lumber Cart
7' 6" x 4', missing 2 wheels

331

Lumber Cart
6' x 4'

332

Lumber Cart
6' x 4'

333

Lumber Cart
4' x 4'

334

Lumber Cart
4' x 4'

335

Lumber Cart
6' x 4', comes with pallet of extra wheels

336

Lumber Cart
6' x 4'

337

Lumber Cart
7' 6" x 4'

338

Lumber Cart
4' x 4'

339

Lumber Cart
6' x 4'

340

Lumber Cart
7' 6" x 4'

341

Lumber Cart
6' x 4', missing 1 wheels

342

Lumber Cart
6' x 4'

343

Lug Loader
Electric drive, 89" x 100", 58" high. In good condition

344

Shop Built 4 Strand Transfer Deck
8' x 15', 10' high, includes 3 belt conveyors (1) 18" x 13', (2) 8" x 160". Has some wear

345

2005 Pendu 5400 Bandsaw
SN: 0502-8618Y, electric drive, 40 hp, 15" x 124" infeed/outfeed, 36" wheels(band), 9' high. In very good condition

346

Jeffrey Top Feed Hammermill
Bottom discharge, 64" x 48", 40" high. In good condition

347

Tronco Bull Edger/Gang Saw
Top arbor, Electric drive, 75 hp, 20" infeed rollers, 6' x 92", 92" high, comes with 64" x 22" infeed. In new condition, NEVER USED!!

348

Comact Gangsaw
Model: SC4742, no drive, 24" infeed rollers, 58" x 64", 88" high

349

2012 L and M Equipment Package Cross Cut Saw
Model: HMPC-7-24, SN: 76112, electric drive, 24' long, includes 4 blades and comes with drag conveyor 25' with 9' incline.

350

RK Machinery Air Compressor
No drive, 10 hp, 120 gallons. Condition unknown

351

Webster Air Compressor
SN: 0905143, electric drive, 10 hp. Condition unknown

352

Pallet of Cylinders
Parts for Debarker

353

Electric Motor and Containers

354

Electric Motors and Gear Drive
5 hp and 1.5 hp

355

Transformer
30" x 26", 14" deep

356

Pallet of Chain and Belts
Various sizes

357

Feed Rollers and Sprockets

358

Pallet of Feed Rollers and Spacers

359

Pallet of Guards

360

Pallet of Motors and Belts

361

Pallet of Chains

362

Pallet of Motors
2 hp, 1 hp, various sizes

363

Pallet of Misc. Parts

364

Pallet of Grab Hooks

365

Pallet of Filters
Air/hydraulic/oil

366

Pallet of Hydraulic Hoses

367

Pallet of Oils and Battery
Exide battery, 15W 40 oil, Liebherr gear oil

368

2 Cylinders
Used with Liebherr log loader lot 255

369

Pallet of Belts

370

Pallet of Belts, Blades, and Gears

371

Pallet of Hydraulic Manifold
4 station

372

Pallet of Roller Cylinder and Parts

373

Pallet of Cylinders and Gears

374

Pallet of Spacers and Tire Chains
43" spacers, snow chains for Liebherr loader

375

Pallet of Chain Transfer Parts

376

Pallet of Manifolds and Gears

377

Pallet of Vallee Bull Edger Spacers
5 3/8" inside, 7 3/16" outside

378

Transformer
16" x 16" x 12 deep

379

Belt Conveyor
10" belt, 16" x 9' x 60" high

380

Belt Conveyor
13" belt, 14" x 140", incline 60" high

381

Grapple
Hydraulic, possibly for slasher lot 256

382

Saw Blade
60"

383

Saw Blade
48"

384

Saw Blade
48", 40 teeth

385

Saw Blade
48"

386

Saw Blade
48"

387

Saw Blade
48"

388

Saw Blade
48", 44 teeth

389

Pallet of Cylinders and Bull Bearings

390

Cylinder Cambio
Used on debarker

391

Berotech Automatic Knife Grinder
Model: EM60, SN: 0004140, electric drive, 600V, 3 phase. In very good condition

392

Container
8' wide x 115" high x 40' long, no contents

393

Parts for Debarker

394

Sorti Wood Working Machine
Model: R/16, SN: 0230322051 USA, Electric drive, 30 hp, 3 phase, 480V, 6" infeed belt, 6' x 102" x 100" overall. In good condition

395

SKH Chipper
Electric drive, 50 hp, top feed, bottom discharge. In good condition

396

397

Baker Cutoff System
Model: BCO-O, SN: 95-146, electric drive, 3 head, 55" wide x 22' long x 10' high. In good condition

398

Stenner 105 Bandsaw
Model: MH510, SN: AP10047, electric drive, 5 head, pneumatic saw straining comes with feed table, 12" x 20', 13' x 21' x 13' high, 4.5" wide band wheel. In rough condition

399

Comact Maxi Tour Slasher
Model: 60, SN: 965110, electric drive, 75 hp, 72" blade, outfeed 24" belt x 15', infeed 14" belt x 10'. Has some wear

400

Wright Blade Sharpener
Model: W-150 HAD, electric drive, 3 phase, 575V

Canada Sawmill Liquidation - Sainte-Thècle, QC G0X 3G0 (ONLINE ONLY)Previous Page Listing ID#: 1559318

Free Email Notifications

Share This Listing

Other Sales byThis Company

Sponsored Links

Canada Sawmill Liquidation - Sainte-Thècle, QC G0X 3G0 (ONLINE ONLY)

Login

Sign Up

Sign Up

Login

Canada Sawmill Liquidation - Sainte-Thècle, QC G0X 3G0 (ONLINE ONLY)
Previous Page Listing ID#: 1559318

Other Sales by
This Company