THIS IS A COMPLETED SALE
View current listings by this company

Gay Brothers Lumber
Previous Page Listing ID#: 1523576

Auction Location
Oneida, KY 40972

Auction Dates and TimesSALE IS COMPLETED
Thursday Jul 13, 2023 Completed

Auction Type
Live Auction

Company Information
Bright Star Realty and Auctions, INC Contact: Loren Beachy Phone: 574-825-0704 Email: beachyauctions@gmail.com Website: brightstarauctions.com GoToAuction.com ID#: 5286 View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area! You may set up alerts by area (zip and radius), keywords, and by company. It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Bidder Terms and Conditions There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items. These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid. “Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION. “Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids. “Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected. “Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder. “Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms. “Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer. "Buyer" means the Winning Bidder with respect to each Lot of Personal Property. "Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. “Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation. “Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer. “High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot. “High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price. “High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot. "Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event. “Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer. “No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale. “Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions. “Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online. "Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered. “Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers. “Personal Property” means all tangible and moveable property, including fixtures, designated as Property. “Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer. “Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer). “Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction. “Property” means the Real Property and the Personal Property. “Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction. “Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction. “Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE. “Reserve Price” means the minimum price that Seller is willing to accept for specific Property. “Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer. “Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid. “Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller). "Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid. “Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration. Governing Law. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online: Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
13. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Information
Don't miss this opportunity at Gay Brothers Lumber's absolute auction on July 13th at 10 AM in Oneida, KY. This fourth-generation operation is relocating and has made the decision to revamp their entire operation with new equipment, thus offering their well-maintained, late-model equipment at auction. Discover standout pieces like the 2005 G-Tech grade resaw, Cleereman carriage, #3 Meadows carriage, Komatsu wheel loader, and more. This liquidation will not affect their successful ongoing operations. 00 Information Lot Type of Auction: Sawmill liquidation of Oneida plant only Highlight Pieces: 2005 G-Tech grade resaw w-run around, Cleereman carriage, # 3 Meadows Carriage, Kamotsu wheel loader 01 Preview Information July 12th from 8:00 am to 5:00 pm. Contact Eugene to make an appointment 574-242-1100 02 Loadout Information Free loadout Friday July 14 and Monday July 17 from 8 AM to 3 PM. Contact Mose Troyer 330-763-3780 with loadout questions. From July 18 through July 22nd from 8 AM to 4 PM there will be a $25 per item loadout fee. Contact the rigger by appointment Rigger: Paul Avery 270-543-1919 03 Payment Information 13% Buyers Premium. 6% KY Tax. KY Trailers are Exempt. Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. 04 Bright Star Auctions Die-Cast Metal 1:64 Scale Truck Replica Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 05 3156G Live Heel Log Loader 1/50 Die-Cast Metal Replica Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 98 Heavy Equipment Key Set 36 Keys Shipping available for $20 99 Manual Sealless Steel Strapping Tool Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30 199 Armstrong Air Swage #5 200 3 Strand Log Deck with Stop'N'Load 11' x 20', no support on one end, hydraulic drive 201 CMC Rosserhead Debarker 4' x 6' cab with controls and electrical boxes, AC unit, 4" x 25" wheels, 14' outside wheels, 24 hp electric hydraulic pack, cable cord carrier, 50 hp electric on head, steel head, slant track 201A New Electric Motor Special ordered for CMC debarker, double end shafts 202 3 Strand Log Deck with Stop'N'Load 11'6" x 19', hydraulic drive 203 HMC Rosserhead Debarker Model: V206HST, SN: 1591-95, 3" x 25" wheels, 13'6" outside wheels, 30 hp electric on head, slant track, cable cord carrier, 4' x 4' with controls, aluminum head 204 Barn Sweep Bark Conveyor 44" x 60' flat and 30' elevated, 16" paddles, electric drive 205 3 Strand Log Deck with Stop'N'Load 12' x 20' plus 4' nose skids, hydraulic drive 206 Cleereman Carriage 3 HB (1st of an entirety) Model: 38, SN 38-692-99, 16' carriage, 110 V over air, Silvatech setworks, controls in cab, pantograph arm, bottom dog cant kicker 207 Track and Frame (Part of an entirety) 53" c-c x 50', support frame to ground 208 Tyrone Berry Carriage Drive (Part of an entirety) Model: SMA 240, SN: A2705, Idler pulley, cable drum with hydraulic motor and cable, 60 hp electric drive 209 Meadow Husk 56" with 30" Top Saw (Part of an entirety) 7' x 8' , hydraulic unit, 24" x 66" off-bear belt, 15" belt, 30" top saw with 30 hp electric 210 Lincoln Electric Motor (Part of an entirety) 150 hp, with cutout, 445T Frame, 1780 rpm, no belts 211 Soft Start (Part of an entirety) 212 Meadows Operator Cab (Part of an entirety) AC unit, cracked glass, no controls 213 Meadows Slab drop (Part of an entirety) 32" x 12', 24" belt, air cylinder 214 Mill Entirety of Lots 206 to 213 With 10% raise. 214A HMC Log Turner Model: ZT12, SN: 64999, hydraulic drive 214B Circular Saw Blade 52", P shanks 215 G-Tech Grade Resaw with Run-Around System Model: 3000, SN: 84131090421 C0B001142, infeed deck-deck to edger, 2" x 42" band wheel, 2" bands, steel web feeds through live press down rolls, 16" x 16" capacity, Gtek industries controls, custom built for Gay Brothers Logging 215A Reckart Dust Blower 9" inlet, 8" outlet, 24" blower, includes elevated frame, electric drive 215B 8" PVC Pipe and Flex Pipe 8" x 50' pipe going from blower, flex pipe from saw to blower 215C Cooks Automatic Band Sharper Speed controller, sharpens up to 2" bands 215D Cooks Band Roller Hand crank 215E 2" Bands New, approx. 50 pc. 216 Reckart Edger 4' x 10' infeed rolls, 2 moving saws, 60 hp motor, twin tailing belt, 1 belt 8" x 20' and 1 belt 18" x 20', MR642, includes starter 217 Live Roll Case 32" x 60', 6 1/2" x 24" rolls, electric drive, built in 3 strand pop-up transfer, 8' x 6' 218 Mellot Vibrating Conveyor 29" x 30', 24" pan, 8" side, electric drive 219 Mellot Vibrating Conveyor 5' fiberglass section, 29" x 60', 24" pan, 8" sides, electric drive 219A Flat Conveyor Metal Detector SN: 980513, Model: CR-85, 24" x 38" detector base, working condition 220 Meadows #2 Carriage (1st of an entirety) 3 head block, 110 V over air, includes pantograph bar, 15' carriage, control in cab, digital setworks 221 Carriage Track & Frame (Part of an entirety) 43 1/2" center to center, 54' long 222 Meadows Husk (Part of an entirety) 56" saw, 6' x 8' main frame, 24" x 66" off-bear belt, hydraulic unit 223 Meadows Vertical Edger (Part of an entirety) 6" x 36" capacity, 50 hp electric motor 224 Lincoln Electric Motor (Part of an entirety) 160 hp, 1780 rpm, 445TL Frame, includes cutout 224A Soft Start (Part of an entirety) For 160 hp motor 225 Meadows Operator Cab (Part of an entirety) 4' x 5', cracked glass, AC unit, no controls 226 Transfer Belt (Part of an entirety) 30" x 24', electric drive 227 Entirety of Lots 220 to 226 With 10% raise. 228 Meadows Log Turner 36" hydraulic drive 229 3 Strand Log Deck 11'6" x 21'6", with stop'n'load, hydraulic cylinder, Tulsa winch drive, hydraulic drive, 3' skid sec. 229A Barn Sweep Conveyor Approx. 200' chain with 12" paddles, electric drive 230 2 Strand Cant Transfer 51" x 14' electric drive 231 Live Roll Case 3' x 17', 6 1/2" x 24" rolls, electric drive 232 Live Roll Case 34" x 24' - 6 1/2" x 24" rolls with 6' belt sec., 6' x 24" belt, electric drive 233 Conveyor Belt 2' x 29', wood sides, electric drive 234 Conveyor Belt 41 1/2" x 22', electric drive 235 Gtek Conveyor Belt 21" x 15'6", hydraulic drive 236 Live Roll Case 33" x 94" - 6" x 24" rolls, electric drive 237 Hemco Trim Saw 24', 22" blade, no sprockets on in feed, drop saw trimmer, 10 saws, control station 237A 6 Strand Transfer Deck 17' x 16', rubber board transfer wheels, electric drive 238 Mellot 4 Strand Unscrambler 12' x 11' 6" x 44" tall 239 4 Strand Transfer Deck 11' x 22', rooftop chains, electric drive 240 3 Strand Transfer Deck 10' x 20', rooftop chains, electric drive 241 4 Strand Green Chain 9'6" x 57', electric drive 242 4 Strand Green Chain 9'6" x 30', electric drive 243 Mellot Vibrating Conveyor 29" x 30', 21" pan, 8" sides, electric drive 244 Barn Sweep Conveyor 40" x 100' flat and 30' elevated 245 Precision Chipper (1st of an entirety) Model: 58-15, SN: 03894, 58", 6 knives, no motor 246 Nema Premium Electric Motor (Part of an entirety) 150 hp, 445T frame, 1490 rpm 246A Electric Motor Soft Start (Part of an entirety) 150 hp. motor starter 247 Precision Chip Shaker Screen (Part of an entirety) 6 x 6 screen, SN: 5-1653, electric drive 248 Precision Cyclone and Pipe (Part of an entirety) 5' cyclone, pipe to chipper 249 Chipper Entirety of Lots 245 to 248 With 10% raise. 250 250 Barn Sweep 40 1/2" x 34' elevated section, 12' flat section, 12" paddles, electric drive 251 Conveyor Belt 30" x 57', 18" belt, electric drive 252 Sullivan-Palatek Air Compressor Model: DG30, SN: 21GE002326, meter reads: 1509 hours, screw type compressor, like new condition 253 2016 Great Lakes Refrigerant Air Dryer Working condition 254 Electrical Boxes Disconnect and breaker box, transformer, motor box 255 480 V Disconnect Box 256 Control Station 2 pc. Pedestal control boxes 257 Electric Motors and Gearboxes 20 hp, 3 hp Lesson with gearbox, 7.5 hp with hydraulic pump, motor mount 258 Carriage Part and Pulleys Saw guide, Cleereman dog, rack for headblock 259 Electric Motors and Gearboxes 260 Hydraulic Motors for Tyrone Berry Feeds 3 pc., 1 should work 261 Gear Box Reverser for Meadows Mill In good condition 262 Belts and Hoses 2 skids of parts 263 Electric Motor Control Center Siemens 20" x 7'6", assorted starters, 480 V. 800 amp 264 Air Cylinders Cylinders for Cleereman carriage, hydraulic pumps 265 Electric Motor Starters All parts on skid 266 Roller Chain and V-Belts Used roller chain, all parts on 2 skids 267 2 Skids of Parts Radiator, hydraulic hoses, pulleys, sprockets 268 Gearboxes and Parts Idler wheel, pulleys, some Reman parts 269 Rolls and Belting, Carriage Wheels All parts on skid 270 Square D Electrical Control Center 10' x 8' assorted starters, 600 amp 271 Square D Electrical Control Center 6' x 8' assorted starters, 600 amp 272 Electric Motor Soft Start 400 hp at 480 V max 273 Mellott #5 Log Turner Chain type, 3' chain, hydraulic drive 274 Miller Welder Model: AEAD-200LE, 140 amp max, Kohler gas engine, works 275 Dayton Air Compressor with Kohler Model: Z960 compressor, Kohler Magnum 10 hp gas motor, works 299 HMC Rosserhead Debarker Model: V206, SN: 1659-97, Slant track 4' x 4' cab with controls, 3" x 25" wheels, 14' outside wheels, aluminum head, 30 hp electric on head, 30' barn sweep, cat walk 300 Salem 7' Band Headrig (1st of an entirety) Air strain, 13" x 7' band wheel, 28" x 7' steel slat off-bear web, no power 301 Salem 3 Headblock Carriage (Part of an entirety) SN: 13023987, 110 V over air, dogs and tapers, electric setworks drive, 7' x 16' carriage, 40" opening, Silvatech controls 301A Salem Control Panels (Part of an entirety) Electrical boxes, control panel for control panels 301B Silvatech Setworks (Part of an entirety) Complete with monitor and control handles 301C Tong Dog and Cylinder (Part of an entirety) For Salem carriage 301D Replacement Inserts (Part of an entirety) For carriage wheels, 7 1/2" hub, 9 pc. 302 Track and Frame (Part of an entirety) 54" c-c x 55', 6" x 8" I-Beam under track 303 Carriage Drive (Part of an entirety) Cable Drum with hydraulic motor, frame it sits on, includes Tyrone Berry feed with 60 hp electric unit not complete 304 Bar Type Log Turner (Part of an entirety) 7' bar, hydraulic cylinders 305 Operators Cab (Part of an entirety) 5' x 7' x 7', AC unit, some control valves 306 Slab Drop Belt (Part of an entirety) 42" x 13' overall, 30" x 11' belt, electric drive 307 Toshiba Electric Motor (Part of an entirety) 250 hp, 1185 rpm, 460 V, frame N587UZ, 8 groove pulley, spins 308 Salem Mill Entirety of Lots 300 to 307 With 10% raise. 309 Steel Support Frame and Dust Box 5/8" x 10" x 10" I-Beams, 9'10" high, 10'4" x 7'9" wide 310 I-Beams Track Frame Support 3/8" x 6 1/2" x 12 1/2" I-beam track frame sits on, 58' long 311 Steel Support Structure 5/8" x 8" x 10" I-Beams, 9' total height, steel steps 312 Band Saw Blades 12" wide, length unknown, 7 pc. 313 Salem Guide Dressing Machine Enclose cutters, electric drive 313A Guide Blocks 15 pc. New 4 1/2" x 13 x 1 3/8" 321 Mattison 202 Straight Line Rip Saw SN: 19102, 20 hp electric drive, 6" x 24" throat capacity, steel feed web 322 Reckart Dust Blower 22", 10" inlet, 8" x 9" outlet, no motor 323 3 Strand Pop-Up Transfer 76" x 64", no chains, hydraulic drive 324 Skate Rolls 5 pc. 36" x 10' with 2" rolls, 8 pc. 16" x 10' with 2" rolls 325 Skate Rolls 25 pc. 16" x 10' with 2" rolls 326 Skate Rolls 18 pc. 16" x 10' with 2" rolls 327 Precision Chipper SN: C-3176, size: 58 x 15, 6 knives, no motor 328 Tyrone Berry Carriage Drive Feed SN: 50233-6, SMA250, 100 hp electric motor, pump and directional valve 329 Armstrong Stretcher Roller SN: 18202, #5 SR, needs parts 330 Belt Conveyor 27" x 10', 24" belt, 12" sides, no drive 331 Bar Type Log Turner 64" bar, with hydraulic cylinders 332 Eisele Chop Saw NO.12H, 14" blade, 3.5 hp electric motor, 32" x 10' steel table on casters with 5/8" steel top 333 Rim with Tire 16 hole rim, rim 28" 334 Electric Motor 60 hp, 1755 rpm, 445T frame, good motor 335 Reliance Electric Motor 150 hp, 1785 rpm, 445T frame 336 Electric Motor 150 hp, 1790 rpm, 445T frame 337 Gearbox Needs bearing 338 Belt Conveyor 36" x 17', elevated, electric motor, no belt, no gearbox 339 Roll Case with Stops 22" x 20', 6" x 13 1/2" rolls, 3 pop-up stops 24" apart, no drive 340 Live Roll Case 34" x 13', 9" x 24" rolls, electric drive, control box 341 Live Roll Case 32" x 18', 9" x 24" rolls, shaft with 4 sprockets for pop-up transfer, electric drive on shaft, no drive on rolls 342 4 Strand Transfer 112" x 34', cut out section no shafts, sprockets or chain 343 Concave Belt Conveyor 36' x 52', 24" belt, metal cover, electric drive 344 Salem 4 HB Carriage SN: 502937-99, 110 V over air controls, electric setworks drive, 3 extra axles, pantograph arm 345 I-Beams 4pc. 9/16" x 12" x 12" x 27' 346 Dust Blower 38" 20" inlet, 11" x 16" outlet, no motor 347 Dead Rolls and Belt Conveyor 2 pc. 4' x 12', 4 1/2" x 42" rolls, 36" x 104" belt conveyor with 22" belt, no drive 348 Mandrel Shaft 3" x 9' shaft, 2 bearings, saw collar 349 Pantograph Arms and Post 1 pc. 14' x 17' round tube, 10' post, 1 pc. 14' x 17' square tube 350 350 2013 Komat'su WA250-7 Wheel Loader SN: 80180 PIN# KMTWA122J01080180 Meter reads: 17,509 hours Engine: Komat'su 154 hp Fuel type: Diesel ROPS: Enclosed 3rd Valve: Yes Tire Size: 20.5R25 Attachments: none, grapple does not sell with loader Heater: Yes A/C: Yes Quick Attach: Yes Features and Notes: Quick attach system, pilot joystick boom controls, radio, computer screen readout, runs and operates good, small glass is broken, a few cosmetic blemishes but a good loader 351 Quick Attach Forks JRB 5" x 42" 352 Rockland Grapple Forks Model: SG544J, SN: R37707, quick attach 355 Barko 160B TRK Knuckleboom SN: 20695 Meter reads: 8,282 hours Engine: Cummins Fuel type: Diesel Continuous Grapple: Yes Trailer: Self propelled, truck towable Delimber: No Bucksaw Hookups: Yes A/C: No Heater: No Features and Notes: Manual lever boom controls, one flat tire, runs and operates, drive shaft currently removed for truck towing 365 Military 6 x 6 Dump Truck SN: 8623-11201, made by Jeep, 5 ton capacity, 8' x 10' dump bed, 2' sides, could be running engine, mileage unknown, 6 cylinder diesel engine 366 City Aluminum Flatbed Trailer SN: AF530304, 8' x 40', sliding strap ratchets, looks road worthy 367 Log Trailer 8' x 40', on road every day, rough condition 368 Rice Lake Survivor Scales 11' x 30' platform, includes printer, Macor control panel in office, Model: IQ+710-2A, working condition

Listing Information

Don't miss this opportunity at Gay Brothers Lumber's absolute auction on July 13th at 10 AM in Oneida, KY. This fourth-generation operation is relocating and has made the decision to revamp their entire operation with new equipment, thus offering their well-maintained, late-model equipment at auction. Discover standout pieces like the 2005 G-Tech grade resaw, Cleereman carriage, #3 Meadows carriage, Komatsu wheel loader, and more. This liquidation will not affect their successful ongoing operations.

Information Lot
Type of Auction: Sawmill liquidation of Oneida plant only
Highlight Pieces: 2005 G-Tech grade resaw w-run around, Cleereman carriage, # 3 Meadows Carriage, Kamotsu wheel loader

Preview Information
July 12th from 8:00 am to 5:00 pm. Contact Eugene to make an appointment 574-242-1100

Loadout Information
Free loadout Friday July 14 and Monday July 17 from 8 AM to 3 PM. Contact Mose Troyer 330-763-3780 with loadout questions. From July 18 through July 22nd from 8 AM to 4 PM there will be a $25 per item loadout fee. Contact the rigger by appointment
Rigger: Paul Avery 270-543-1919

Payment Information
13% Buyers Premium. 6% KY Tax. KY Trailers are Exempt. Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction.

Bright Star Auctions Die-Cast Metal 1:64 Scale Truck Replica
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s

3156G Live Heel Log Loader 1/50 Die-Cast Metal Replica
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s

Heavy Equipment Key Set 36 Keys
Shipping available for $20

Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

199

Armstrong Air Swage #5

200

3 Strand Log Deck with Stop'N'Load
11' x 20', no support on one end, hydraulic drive

201

CMC Rosserhead Debarker
4' x 6' cab with controls and electrical boxes, AC unit, 4" x 25" wheels, 14' outside wheels, 24 hp electric hydraulic pack, cable cord carrier, 50 hp electric on head, steel head, slant track

201A

New Electric Motor
Special ordered for CMC debarker, double end shafts

202

3 Strand Log Deck with Stop'N'Load
11'6" x 19', hydraulic drive

203

HMC Rosserhead Debarker
Model: V206HST, SN: 1591-95, 3" x 25" wheels, 13'6" outside wheels, 30 hp electric on head, slant track, cable cord carrier, 4' x 4' with controls, aluminum head

204

Barn Sweep Bark Conveyor
44" x 60' flat and 30' elevated, 16" paddles, electric drive

205

3 Strand Log Deck with Stop'N'Load
12' x 20' plus 4' nose skids, hydraulic drive

206

Cleereman Carriage 3 HB
(1st of an entirety) Model: 38, SN 38-692-99, 16' carriage, 110 V over air, Silvatech setworks, controls in cab, pantograph arm, bottom dog cant kicker

207

Track and Frame
(Part of an entirety) 53" c-c x 50', support frame to ground

208

Tyrone Berry Carriage Drive
(Part of an entirety) Model: SMA 240, SN: A2705, Idler pulley, cable drum with hydraulic motor and cable, 60 hp electric drive

209

Meadow Husk 56" with 30" Top Saw
(Part of an entirety) 7' x 8' , hydraulic unit, 24" x 66" off-bear belt, 15" belt, 30" top saw with 30 hp electric

210

Lincoln Electric Motor
(Part of an entirety) 150 hp, with cutout, 445T Frame, 1780 rpm, no belts

211

Soft Start
(Part of an entirety)

212

Meadows Operator Cab
(Part of an entirety) AC unit, cracked glass, no controls

213

Meadows Slab drop
(Part of an entirety) 32" x 12', 24" belt, air cylinder

214

Mill Entirety of Lots 206 to 213
With 10% raise.

214A

HMC Log Turner
Model: ZT12, SN: 64999, hydraulic drive

214B

Circular Saw Blade
52", P shanks

215

G-Tech Grade Resaw with Run-Around System
Model: 3000, SN: 84131090421 C0B001142, infeed deck-deck to edger, 2" x 42" band wheel, 2" bands, steel web feeds through live press down rolls, 16" x 16" capacity, Gtek industries controls, custom built for Gay Brothers Logging

215A

Reckart Dust Blower
9" inlet, 8" outlet, 24" blower, includes elevated frame, electric drive

215B

8" PVC Pipe and Flex Pipe
8" x 50' pipe going from blower, flex pipe from saw to blower

215C

Cooks Automatic Band Sharper
Speed controller, sharpens up to 2" bands

215D

Cooks Band Roller
Hand crank

215E

2" Bands
New, approx. 50 pc.

216

Reckart Edger
4' x 10' infeed rolls, 2 moving saws, 60 hp motor, twin tailing belt, 1 belt 8" x 20' and 1 belt 18" x 20', MR642, includes starter

217

Live Roll Case
32" x 60', 6 1/2" x 24" rolls, electric drive, built in 3 strand pop-up transfer, 8' x 6'

218

Mellot Vibrating Conveyor
29" x 30', 24" pan, 8" side, electric drive

219

Mellot Vibrating Conveyor
5' fiberglass section, 29" x 60', 24" pan, 8" sides, electric drive

219A

Flat Conveyor Metal Detector
SN: 980513, Model: CR-85, 24" x 38" detector base, working condition

220

Meadows #2 Carriage
(1st of an entirety) 3 head block, 110 V over air, includes pantograph bar, 15' carriage, control in cab, digital setworks

221

Carriage Track & Frame
(Part of an entirety) 43 1/2" center to center, 54' long

222

Meadows Husk
(Part of an entirety) 56" saw, 6' x 8' main frame, 24" x 66" off-bear belt, hydraulic unit

223

Meadows Vertical Edger
(Part of an entirety) 6" x 36" capacity, 50 hp electric motor

224

Lincoln Electric Motor
(Part of an entirety) 160 hp, 1780 rpm, 445TL Frame, includes cutout

224A

Soft Start
(Part of an entirety) For 160 hp motor

225

Meadows Operator Cab
(Part of an entirety) 4' x 5', cracked glass, AC unit, no controls

226

Transfer Belt
(Part of an entirety) 30" x 24', electric drive

227

Entirety of Lots 220 to 226
With 10% raise.

228

Meadows Log Turner
36" hydraulic drive

229

3 Strand Log Deck
11'6" x 21'6", with stop'n'load, hydraulic cylinder, Tulsa winch drive, hydraulic drive, 3' skid sec.

229A

Barn Sweep Conveyor
Approx. 200' chain with 12" paddles, electric drive

230

2 Strand Cant Transfer
51" x 14' electric drive

231

Live Roll Case
3' x 17', 6 1/2" x 24" rolls, electric drive

232

Live Roll Case
34" x 24' - 6 1/2" x 24" rolls with 6' belt sec., 6' x 24" belt, electric drive

233

Conveyor Belt
2' x 29', wood sides, electric drive

234

Conveyor Belt
41 1/2" x 22', electric drive

235

Gtek Conveyor Belt
21" x 15'6", hydraulic drive

236

Live Roll Case
33" x 94" - 6" x 24" rolls, electric drive

237

Hemco Trim Saw
24', 22" blade, no sprockets on in feed, drop saw trimmer, 10 saws, control station

237A

6 Strand Transfer Deck
17' x 16', rubber board transfer wheels, electric drive

238

Mellot 4 Strand Unscrambler
12' x 11' 6" x 44" tall

239

4 Strand Transfer Deck
11' x 22', rooftop chains, electric drive

240

3 Strand Transfer Deck
10' x 20', rooftop chains, electric drive

241

4 Strand Green Chain
9'6" x 57', electric drive

242

4 Strand Green Chain
9'6" x 30', electric drive

243

Mellot Vibrating Conveyor
29" x 30', 21" pan, 8" sides, electric drive

244

Barn Sweep Conveyor
40" x 100' flat and 30' elevated

245

Precision Chipper
(1st of an entirety) Model: 58-15, SN: 03894, 58", 6 knives, no motor

246

Nema Premium Electric Motor
(Part of an entirety) 150 hp, 445T frame, 1490 rpm

246A

Electric Motor Soft Start
(Part of an entirety) 150 hp. motor starter

247

Precision Chip Shaker Screen
(Part of an entirety) 6 x 6 screen, SN: 5-1653, electric drive

248

Precision Cyclone and Pipe
(Part of an entirety) 5' cyclone, pipe to chipper

249

Chipper Entirety of Lots 245 to 248
With 10% raise.

250

Barn Sweep
40 1/2" x 34' elevated section, 12' flat section, 12" paddles, electric drive

251

Conveyor Belt
30" x 57', 18" belt, electric drive

252

Sullivan-Palatek Air Compressor
Model: DG30, SN: 21GE002326, meter reads: 1509 hours, screw type compressor, like new condition

253

2016 Great Lakes Refrigerant Air Dryer
Working condition

254

Electrical Boxes
Disconnect and breaker box, transformer, motor box

255

480 V Disconnect Box

256

Control Station
2 pc. Pedestal control boxes

257

Electric Motors and Gearboxes
20 hp, 3 hp Lesson with gearbox, 7.5 hp with hydraulic pump, motor mount

258

Carriage Part and Pulleys
Saw guide, Cleereman dog, rack for headblock

259

Electric Motors and Gearboxes

260

Hydraulic Motors for Tyrone Berry Feeds
3 pc., 1 should work

261

Gear Box Reverser for Meadows Mill
In good condition

262

Belts and Hoses
2 skids of parts

263

Electric Motor Control Center Siemens
20" x 7'6", assorted starters, 480 V. 800 amp

264

Air Cylinders
Cylinders for Cleereman carriage, hydraulic pumps

265

Electric Motor Starters
All parts on skid

266

Roller Chain and V-Belts
Used roller chain, all parts on 2 skids

267

2 Skids of Parts
Radiator, hydraulic hoses, pulleys, sprockets

268

Gearboxes and Parts
Idler wheel, pulleys, some Reman parts

269

Rolls and Belting, Carriage Wheels
All parts on skid

270

Square D Electrical Control Center
10' x 8' assorted starters, 600 amp

271

Square D Electrical Control Center
6' x 8' assorted starters, 600 amp

272

Electric Motor Soft Start
400 hp at 480 V max

273

Mellott #5 Log Turner
Chain type, 3' chain, hydraulic drive

274

Miller Welder
Model: AEAD-200LE, 140 amp max, Kohler gas engine, works

275

Dayton Air Compressor with Kohler
Model: Z960 compressor, Kohler Magnum 10 hp gas motor, works

299

HMC Rosserhead Debarker
Model: V206, SN: 1659-97, Slant track 4' x 4' cab with controls, 3" x 25" wheels, 14' outside wheels, aluminum head, 30 hp electric on head, 30' barn sweep, cat walk

300

Salem 7' Band Headrig
(1st of an entirety) Air strain, 13" x 7' band wheel, 28" x 7' steel slat off-bear web, no power

301

Salem 3 Headblock Carriage
(Part of an entirety) SN: 13023987, 110 V over air, dogs and tapers, electric setworks drive, 7' x 16' carriage, 40" opening, Silvatech controls

301A

Salem Control Panels
(Part of an entirety) Electrical boxes, control panel for control panels

301B

Silvatech Setworks
(Part of an entirety) Complete with monitor and control handles

301C

Tong Dog and Cylinder
(Part of an entirety) For Salem carriage

301D

Replacement Inserts
(Part of an entirety) For carriage wheels, 7 1/2" hub, 9 pc.

302

Track and Frame
(Part of an entirety) 54" c-c x 55', 6" x 8" I-Beam under track

303

Carriage Drive
(Part of an entirety) Cable Drum with hydraulic motor, frame it sits on, includes Tyrone Berry feed with 60 hp electric unit not complete

304

Bar Type Log Turner
(Part of an entirety) 7' bar, hydraulic cylinders

305

Operators Cab
(Part of an entirety) 5' x 7' x 7', AC unit, some control valves

306

Slab Drop Belt
(Part of an entirety) 42" x 13' overall, 30" x 11' belt, electric drive

307

Toshiba Electric Motor
(Part of an entirety) 250 hp, 1185 rpm, 460 V, frame N587UZ, 8 groove pulley, spins

308

Salem Mill Entirety of Lots 300 to 307
With 10% raise.

309

Steel Support Frame and Dust Box
5/8" x 10" x 10" I-Beams, 9'10" high, 10'4" x 7'9" wide

310

I-Beams Track Frame Support
3/8" x 6 1/2" x 12 1/2" I-beam track frame sits on, 58' long

311

Steel Support Structure
5/8" x 8" x 10" I-Beams, 9' total height, steel steps

312

Band Saw Blades
12" wide, length unknown, 7 pc.

313

Salem Guide Dressing Machine
Enclose cutters, electric drive

313A

Guide Blocks
15 pc. New 4 1/2" x 13 x 1 3/8"

321

Mattison 202 Straight Line Rip Saw
SN: 19102, 20 hp electric drive, 6" x 24" throat capacity, steel feed web

322

Reckart Dust Blower
22", 10" inlet, 8" x 9" outlet, no motor

323

3 Strand Pop-Up Transfer
76" x 64", no chains, hydraulic drive

324

Skate Rolls
5 pc. 36" x 10' with 2" rolls, 8 pc. 16" x 10' with 2" rolls

325

Skate Rolls
25 pc. 16" x 10' with 2" rolls

326

Skate Rolls
18 pc. 16" x 10' with 2" rolls

327

Precision Chipper
SN: C-3176, size: 58 x 15, 6 knives, no motor

328

Tyrone Berry Carriage Drive Feed
SN: 50233-6, SMA250, 100 hp electric motor, pump and directional valve

329

Armstrong Stretcher Roller
SN: 18202, #5 SR, needs parts

330

Belt Conveyor
27" x 10', 24" belt, 12" sides, no drive

331

Bar Type Log Turner
64" bar, with hydraulic cylinders

332

Eisele Chop Saw
NO.12H, 14" blade, 3.5 hp electric motor, 32" x 10' steel table on casters with 5/8" steel top

333

Rim with Tire
16 hole rim, rim 28"

334

Electric Motor
60 hp, 1755 rpm, 445T frame, good motor

335

Reliance Electric Motor
150 hp, 1785 rpm, 445T frame

336

Electric Motor
150 hp, 1790 rpm, 445T frame

337

Gearbox
Needs bearing

338

Belt Conveyor
36" x 17', elevated, electric motor, no belt, no gearbox

339

Roll Case with Stops
22" x 20', 6" x 13 1/2" rolls, 3 pop-up stops 24" apart, no drive

340

Live Roll Case
34" x 13', 9" x 24" rolls, electric drive, control box

341

Live Roll Case
32" x 18', 9" x 24" rolls, shaft with 4 sprockets for pop-up transfer, electric drive on shaft, no drive on rolls

342

4 Strand Transfer
112" x 34', cut out section no shafts, sprockets or chain

343

Concave Belt Conveyor
36' x 52', 24" belt, metal cover, electric drive

344

Salem 4 HB Carriage
SN: 502937-99, 110 V over air controls, electric setworks drive, 3 extra axles, pantograph arm

345

I-Beams
4pc. 9/16" x 12" x 12" x 27'

346

Dust Blower 38"
20" inlet, 11" x 16" outlet, no motor

347

Dead Rolls and Belt Conveyor
2 pc. 4' x 12', 4 1/2" x 42" rolls, 36" x 104" belt conveyor with 22" belt, no drive

348

Mandrel Shaft
3" x 9' shaft, 2 bearings, saw collar

349

Pantograph Arms and Post
1 pc. 14' x 17' round tube, 10' post, 1 pc. 14' x 17' square tube

350

2013 Komat'su WA250-7 Wheel Loader
SN: 80180 PIN# KMTWA122J01080180
Meter reads: 17,509 hours
Engine: Komat'su 154 hp
Fuel type: Diesel
ROPS: Enclosed
3rd Valve: Yes
Tire Size: 20.5R25
Attachments: none, grapple does not sell with loader
Heater: Yes
A/C: Yes
Quick Attach: Yes

Features and Notes: Quick attach system, pilot joystick boom controls, radio, computer screen readout, runs and operates good, small glass is broken, a few cosmetic blemishes but a good loader

351

Quick Attach Forks JRB
5" x 42"

352

Rockland Grapple Forks
Model: SG544J, SN: R37707, quick attach

355

Barko 160B TRK Knuckleboom
SN: 20695
Meter reads: 8,282 hours
Engine: Cummins
Fuel type: Diesel
Continuous Grapple: Yes
Trailer: Self propelled, truck towable
Delimber: No
Bucksaw Hookups: Yes
A/C: No
Heater: No

Features and Notes: Manual lever boom controls, one flat tire, runs and operates, drive shaft currently removed for truck towing

365

Military 6 x 6 Dump Truck
SN: 8623-11201, made by Jeep, 5 ton capacity, 8' x 10' dump bed, 2' sides, could be running engine, mileage unknown, 6 cylinder diesel engine

366

City Aluminum Flatbed Trailer
SN: AF530304, 8' x 40', sliding strap ratchets, looks road worthy

367

Log Trailer
8' x 40', on road every day, rough condition

368

Rice Lake Survivor Scales
11' x 30' platform, includes printer, Macor control panel in office, Model: IQ+710-2A, working condition

Photo Gallery

Share This Listing

Other Sales by
This Company

Jun 21
Culpeper, VA

Jun 21
na, IN

Jun 21
na, IN

Jun 24
Burr Oak, MI

Jun 26
Elkin, NC

View all listings

Gay Brothers Lumber

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704

3222 State Hwy 1482
Oneida, KY 40972

Thursday Jul 13, 2023 Completed

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
13. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Details
Don't miss this opportunity at Gay Brothers Lumber's absolute auction on July 13th at 10 AM in Oneida, KY. This fourth-generation operation is relocating and has made the decision to revamp their entire operation with new equipment, thus offering their well-maintained, late-model equipment at auction. Discover standout pieces like the 2005 G-Tech grade resaw, Cleereman carriage, #3 Meadows carriage, Komatsu wheel loader, and more. This liquidation will not affect their successful ongoing operations. 00 Information Lot Type of Auction: Sawmill liquidation of Oneida plant only Highlight Pieces: 2005 G-Tech grade resaw w-run around, Cleereman carriage, # 3 Meadows Carriage, Kamotsu wheel loader 01 Preview Information July 12th from 8:00 am to 5:00 pm. Contact Eugene to make an appointment 574-242-1100 02 Loadout Information Free loadout Friday July 14 and Monday July 17 from 8 AM to 3 PM. Contact Mose Troyer 330-763-3780 with loadout questions. From July 18 through July 22nd from 8 AM to 4 PM there will be a $25 per item loadout fee. Contact the rigger by appointment Rigger: Paul Avery 270-543-1919 03 Payment Information 13% Buyers Premium. 6% KY Tax. KY Trailers are Exempt. Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. 04 Bright Star Auctions Die-Cast Metal 1:64 Scale Truck Replica Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 05 3156G Live Heel Log Loader 1/50 Die-Cast Metal Replica Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 98 Heavy Equipment Key Set 36 Keys Shipping available for $20 99 Manual Sealless Steel Strapping Tool Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30 199 Armstrong Air Swage #5 200 3 Strand Log Deck with Stop'N'Load 11' x 20', no support on one end, hydraulic drive 201 CMC Rosserhead Debarker 4' x 6' cab with controls and electrical boxes, AC unit, 4" x 25" wheels, 14' outside wheels, 24 hp electric hydraulic pack, cable cord carrier, 50 hp electric on head, steel head, slant track 201A New Electric Motor Special ordered for CMC debarker, double end shafts 202 3 Strand Log Deck with Stop'N'Load 11'6" x 19', hydraulic drive 203 HMC Rosserhead Debarker Model: V206HST, SN: 1591-95, 3" x 25" wheels, 13'6" outside wheels, 30 hp electric on head, slant track, cable cord carrier, 4' x 4' with controls, aluminum head 204 Barn Sweep Bark Conveyor 44" x 60' flat and 30' elevated, 16" paddles, electric drive 205 3 Strand Log Deck with Stop'N'Load 12' x 20' plus 4' nose skids, hydraulic drive 206 Cleereman Carriage 3 HB (1st of an entirety) Model: 38, SN 38-692-99, 16' carriage, 110 V over air, Silvatech setworks, controls in cab, pantograph arm, bottom dog cant kicker 207 Track and Frame (Part of an entirety) 53" c-c x 50', support frame to ground 208 Tyrone Berry Carriage Drive (Part of an entirety) Model: SMA 240, SN: A2705, Idler pulley, cable drum with hydraulic motor and cable, 60 hp electric drive 209 Meadow Husk 56" with 30" Top Saw (Part of an entirety) 7' x 8' , hydraulic unit, 24" x 66" off-bear belt, 15" belt, 30" top saw with 30 hp electric 210 Lincoln Electric Motor (Part of an entirety) 150 hp, with cutout, 445T Frame, 1780 rpm, no belts 211 Soft Start (Part of an entirety) 212 Meadows Operator Cab (Part of an entirety) AC unit, cracked glass, no controls 213 Meadows Slab drop (Part of an entirety) 32" x 12', 24" belt, air cylinder 214 Mill Entirety of Lots 206 to 213 With 10% raise. 214A HMC Log Turner Model: ZT12, SN: 64999, hydraulic drive 214B Circular Saw Blade 52", P shanks 215 G-Tech Grade Resaw with Run-Around System Model: 3000, SN: 84131090421 C0B001142, infeed deck-deck to edger, 2" x 42" band wheel, 2" bands, steel web feeds through live press down rolls, 16" x 16" capacity, Gtek industries controls, custom built for Gay Brothers Logging 215A Reckart Dust Blower 9" inlet, 8" outlet, 24" blower, includes elevated frame, electric drive 215B 8" PVC Pipe and Flex Pipe 8" x 50' pipe going from blower, flex pipe from saw to blower 215C Cooks Automatic Band Sharper Speed controller, sharpens up to 2" bands 215D Cooks Band Roller Hand crank 215E 2" Bands New, approx. 50 pc. 216 Reckart Edger 4' x 10' infeed rolls, 2 moving saws, 60 hp motor, twin tailing belt, 1 belt 8" x 20' and 1 belt 18" x 20', MR642, includes starter 217 Live Roll Case 32" x 60', 6 1/2" x 24" rolls, electric drive, built in 3 strand pop-up transfer, 8' x 6' 218 Mellot Vibrating Conveyor 29" x 30', 24" pan, 8" side, electric drive 219 Mellot Vibrating Conveyor 5' fiberglass section, 29" x 60', 24" pan, 8" sides, electric drive 219A Flat Conveyor Metal Detector SN: 980513, Model: CR-85, 24" x 38" detector base, working condition 220 Meadows #2 Carriage (1st of an entirety) 3 head block, 110 V over air, includes pantograph bar, 15' carriage, control in cab, digital setworks 221 Carriage Track & Frame (Part of an entirety) 43 1/2" center to center, 54' long 222 Meadows Husk (Part of an entirety) 56" saw, 6' x 8' main frame, 24" x 66" off-bear belt, hydraulic unit 223 Meadows Vertical Edger (Part of an entirety) 6" x 36" capacity, 50 hp electric motor 224 Lincoln Electric Motor (Part of an entirety) 160 hp, 1780 rpm, 445TL Frame, includes cutout 224A Soft Start (Part of an entirety) For 160 hp motor 225 Meadows Operator Cab (Part of an entirety) 4' x 5', cracked glass, AC unit, no controls 226 Transfer Belt (Part of an entirety) 30" x 24', electric drive 227 Entirety of Lots 220 to 226 With 10% raise. 228 Meadows Log Turner 36" hydraulic drive 229 3 Strand Log Deck 11'6" x 21'6", with stop'n'load, hydraulic cylinder, Tulsa winch drive, hydraulic drive, 3' skid sec. 229A Barn Sweep Conveyor Approx. 200' chain with 12" paddles, electric drive 230 2 Strand Cant Transfer 51" x 14' electric drive 231 Live Roll Case 3' x 17', 6 1/2" x 24" rolls, electric drive 232 Live Roll Case 34" x 24' - 6 1/2" x 24" rolls with 6' belt sec., 6' x 24" belt, electric drive 233 Conveyor Belt 2' x 29', wood sides, electric drive 234 Conveyor Belt 41 1/2" x 22', electric drive 235 Gtek Conveyor Belt 21" x 15'6", hydraulic drive 236 Live Roll Case 33" x 94" - 6" x 24" rolls, electric drive 237 Hemco Trim Saw 24', 22" blade, no sprockets on in feed, drop saw trimmer, 10 saws, control station 237A 6 Strand Transfer Deck 17' x 16', rubber board transfer wheels, electric drive 238 Mellot 4 Strand Unscrambler 12' x 11' 6" x 44" tall 239 4 Strand Transfer Deck 11' x 22', rooftop chains, electric drive 240 3 Strand Transfer Deck 10' x 20', rooftop chains, electric drive 241 4 Strand Green Chain 9'6" x 57', electric drive 242 4 Strand Green Chain 9'6" x 30', electric drive 243 Mellot Vibrating Conveyor 29" x 30', 21" pan, 8" sides, electric drive 244 Barn Sweep Conveyor 40" x 100' flat and 30' elevated 245 Precision Chipper (1st of an entirety) Model: 58-15, SN: 03894, 58", 6 knives, no motor 246 Nema Premium Electric Motor (Part of an entirety) 150 hp, 445T frame, 1490 rpm 246A Electric Motor Soft Start (Part of an entirety) 150 hp. motor starter 247 Precision Chip Shaker Screen (Part of an entirety) 6 x 6 screen, SN: 5-1653, electric drive 248 Precision Cyclone and Pipe (Part of an entirety) 5' cyclone, pipe to chipper 249 Chipper Entirety of Lots 245 to 248 With 10% raise. 250 250 Barn Sweep 40 1/2" x 34' elevated section, 12' flat section, 12" paddles, electric drive 251 Conveyor Belt 30" x 57', 18" belt, electric drive 252 Sullivan-Palatek Air Compressor Model: DG30, SN: 21GE002326, meter reads: 1509 hours, screw type compressor, like new condition 253 2016 Great Lakes Refrigerant Air Dryer Working condition 254 Electrical Boxes Disconnect and breaker box, transformer, motor box 255 480 V Disconnect Box 256 Control Station 2 pc. Pedestal control boxes 257 Electric Motors and Gearboxes 20 hp, 3 hp Lesson with gearbox, 7.5 hp with hydraulic pump, motor mount 258 Carriage Part and Pulleys Saw guide, Cleereman dog, rack for headblock 259 Electric Motors and Gearboxes 260 Hydraulic Motors for Tyrone Berry Feeds 3 pc., 1 should work 261 Gear Box Reverser for Meadows Mill In good condition 262 Belts and Hoses 2 skids of parts 263 Electric Motor Control Center Siemens 20" x 7'6", assorted starters, 480 V. 800 amp 264 Air Cylinders Cylinders for Cleereman carriage, hydraulic pumps 265 Electric Motor Starters All parts on skid 266 Roller Chain and V-Belts Used roller chain, all parts on 2 skids 267 2 Skids of Parts Radiator, hydraulic hoses, pulleys, sprockets 268 Gearboxes and Parts Idler wheel, pulleys, some Reman parts 269 Rolls and Belting, Carriage Wheels All parts on skid 270 Square D Electrical Control Center 10' x 8' assorted starters, 600 amp 271 Square D Electrical Control Center 6' x 8' assorted starters, 600 amp 272 Electric Motor Soft Start 400 hp at 480 V max 273 Mellott #5 Log Turner Chain type, 3' chain, hydraulic drive 274 Miller Welder Model: AEAD-200LE, 140 amp max, Kohler gas engine, works 275 Dayton Air Compressor with Kohler Model: Z960 compressor, Kohler Magnum 10 hp gas motor, works 299 HMC Rosserhead Debarker Model: V206, SN: 1659-97, Slant track 4' x 4' cab with controls, 3" x 25" wheels, 14' outside wheels, aluminum head, 30 hp electric on head, 30' barn sweep, cat walk 300 Salem 7' Band Headrig (1st of an entirety) Air strain, 13" x 7' band wheel, 28" x 7' steel slat off-bear web, no power 301 Salem 3 Headblock Carriage (Part of an entirety) SN: 13023987, 110 V over air, dogs and tapers, electric setworks drive, 7' x 16' carriage, 40" opening, Silvatech controls 301A Salem Control Panels (Part of an entirety) Electrical boxes, control panel for control panels 301B Silvatech Setworks (Part of an entirety) Complete with monitor and control handles 301C Tong Dog and Cylinder (Part of an entirety) For Salem carriage 301D Replacement Inserts (Part of an entirety) For carriage wheels, 7 1/2" hub, 9 pc. 302 Track and Frame (Part of an entirety) 54" c-c x 55', 6" x 8" I-Beam under track 303 Carriage Drive (Part of an entirety) Cable Drum with hydraulic motor, frame it sits on, includes Tyrone Berry feed with 60 hp electric unit not complete 304 Bar Type Log Turner (Part of an entirety) 7' bar, hydraulic cylinders 305 Operators Cab (Part of an entirety) 5' x 7' x 7', AC unit, some control valves 306 Slab Drop Belt (Part of an entirety) 42" x 13' overall, 30" x 11' belt, electric drive 307 Toshiba Electric Motor (Part of an entirety) 250 hp, 1185 rpm, 460 V, frame N587UZ, 8 groove pulley, spins 308 Salem Mill Entirety of Lots 300 to 307 With 10% raise. 309 Steel Support Frame and Dust Box 5/8" x 10" x 10" I-Beams, 9'10" high, 10'4" x 7'9" wide 310 I-Beams Track Frame Support 3/8" x 6 1/2" x 12 1/2" I-beam track frame sits on, 58' long 311 Steel Support Structure 5/8" x 8" x 10" I-Beams, 9' total height, steel steps 312 Band Saw Blades 12" wide, length unknown, 7 pc. 313 Salem Guide Dressing Machine Enclose cutters, electric drive 313A Guide Blocks 15 pc. New 4 1/2" x 13 x 1 3/8" 321 Mattison 202 Straight Line Rip Saw SN: 19102, 20 hp electric drive, 6" x 24" throat capacity, steel feed web 322 Reckart Dust Blower 22", 10" inlet, 8" x 9" outlet, no motor 323 3 Strand Pop-Up Transfer 76" x 64", no chains, hydraulic drive 324 Skate Rolls 5 pc. 36" x 10' with 2" rolls, 8 pc. 16" x 10' with 2" rolls 325 Skate Rolls 25 pc. 16" x 10' with 2" rolls 326 Skate Rolls 18 pc. 16" x 10' with 2" rolls 327 Precision Chipper SN: C-3176, size: 58 x 15, 6 knives, no motor 328 Tyrone Berry Carriage Drive Feed SN: 50233-6, SMA250, 100 hp electric motor, pump and directional valve 329 Armstrong Stretcher Roller SN: 18202, #5 SR, needs parts 330 Belt Conveyor 27" x 10', 24" belt, 12" sides, no drive 331 Bar Type Log Turner 64" bar, with hydraulic cylinders 332 Eisele Chop Saw NO.12H, 14" blade, 3.5 hp electric motor, 32" x 10' steel table on casters with 5/8" steel top 333 Rim with Tire 16 hole rim, rim 28" 334 Electric Motor 60 hp, 1755 rpm, 445T frame, good motor 335 Reliance Electric Motor 150 hp, 1785 rpm, 445T frame 336 Electric Motor 150 hp, 1790 rpm, 445T frame 337 Gearbox Needs bearing 338 Belt Conveyor 36" x 17', elevated, electric motor, no belt, no gearbox 339 Roll Case with Stops 22" x 20', 6" x 13 1/2" rolls, 3 pop-up stops 24" apart, no drive 340 Live Roll Case 34" x 13', 9" x 24" rolls, electric drive, control box 341 Live Roll Case 32" x 18', 9" x 24" rolls, shaft with 4 sprockets for pop-up transfer, electric drive on shaft, no drive on rolls 342 4 Strand Transfer 112" x 34', cut out section no shafts, sprockets or chain 343 Concave Belt Conveyor 36' x 52', 24" belt, metal cover, electric drive 344 Salem 4 HB Carriage SN: 502937-99, 110 V over air controls, electric setworks drive, 3 extra axles, pantograph arm 345 I-Beams 4pc. 9/16" x 12" x 12" x 27' 346 Dust Blower 38" 20" inlet, 11" x 16" outlet, no motor 347 Dead Rolls and Belt Conveyor 2 pc. 4' x 12', 4 1/2" x 42" rolls, 36" x 104" belt conveyor with 22" belt, no drive 348 Mandrel Shaft 3" x 9' shaft, 2 bearings, saw collar 349 Pantograph Arms and Post 1 pc. 14' x 17' round tube, 10' post, 1 pc. 14' x 17' square tube 350 350 2013 Komat'su WA250-7 Wheel Loader SN: 80180 PIN# KMTWA122J01080180 Meter reads: 17,509 hours Engine: Komat'su 154 hp Fuel type: Diesel ROPS: Enclosed 3rd Valve: Yes Tire Size: 20.5R25 Attachments: none, grapple does not sell with loader Heater: Yes A/C: Yes Quick Attach: Yes Features and Notes: Quick attach system, pilot joystick boom controls, radio, computer screen readout, runs and operates good, small glass is broken, a few cosmetic blemishes but a good loader 351 Quick Attach Forks JRB 5" x 42" 352 Rockland Grapple Forks Model: SG544J, SN: R37707, quick attach 355 Barko 160B TRK Knuckleboom SN: 20695 Meter reads: 8,282 hours Engine: Cummins Fuel type: Diesel Continuous Grapple: Yes Trailer: Self propelled, truck towable Delimber: No Bucksaw Hookups: Yes A/C: No Heater: No Features and Notes: Manual lever boom controls, one flat tire, runs and operates, drive shaft currently removed for truck towing 365 Military 6 x 6 Dump Truck SN: 8623-11201, made by Jeep, 5 ton capacity, 8' x 10' dump bed, 2' sides, could be running engine, mileage unknown, 6 cylinder diesel engine 366 City Aluminum Flatbed Trailer SN: AF530304, 8' x 40', sliding strap ratchets, looks road worthy 367 Log Trailer 8' x 40', on road every day, rough condition 368 Rice Lake Survivor Scales 11' x 30' platform, includes printer, Macor control panel in office, Model: IQ+710-2A, working condition

Close X

Gallery Images Loading, Please Wait...

Close X

Save this sale to your Saved Sales list!

Your Saved Sales list is an easy way to return to sale listings which are of interest to you.

Login

Username:

Password:

Sign Up

FREE EMAIL NOTIFICATIONS
auction listings delivered to your inbox

Close X

Sign Up

FREE EMAIL NOTIFICATIONS
auction listings delivered to your inbox

Login

Username:

Password:

Return

Gay Brothers Lumber

Live Auction

View Gallery (153)

Auction Date(s)

Thursday Jul 13, 2023 Completed

Auction Location

Oneida, KY 40972

View Map

Company

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Website: brightstarauctions.com

Listing Terms and Conditions

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
13. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Preview Information
July 12th from 8:00 am to 5:00 pm. Contact Eugene to make an appointment 574-242-1100

Heavy Equipment Key Set 36 Keys
Shipping available for $20

Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

199

Armstrong Air Swage #5

200

3 Strand Log Deck with Stop'N'Load
11' x 20', no support on one end, hydraulic drive

201

201A

New Electric Motor
Special ordered for CMC debarker, double end shafts

202

3 Strand Log Deck with Stop'N'Load
11'6" x 19', hydraulic drive

203

HMC Rosserhead Debarker
Model: V206HST, SN: 1591-95, 3" x 25" wheels, 13'6" outside wheels, 30 hp electric on head, slant track, cable cord carrier, 4' x 4' with controls, aluminum head

204

Barn Sweep Bark Conveyor
44" x 60' flat and 30' elevated, 16" paddles, electric drive

205

3 Strand Log Deck with Stop'N'Load
12' x 20' plus 4' nose skids, hydraulic drive

206

Cleereman Carriage 3 HB
(1st of an entirety) Model: 38, SN 38-692-99, 16' carriage, 110 V over air, Silvatech setworks, controls in cab, pantograph arm, bottom dog cant kicker

207

Track and Frame
(Part of an entirety) 53" c-c x 50', support frame to ground

208

Tyrone Berry Carriage Drive
(Part of an entirety) Model: SMA 240, SN: A2705, Idler pulley, cable drum with hydraulic motor and cable, 60 hp electric drive

209

Meadow Husk 56" with 30" Top Saw
(Part of an entirety) 7' x 8' , hydraulic unit, 24" x 66" off-bear belt, 15" belt, 30" top saw with 30 hp electric

210

Lincoln Electric Motor
(Part of an entirety) 150 hp, with cutout, 445T Frame, 1780 rpm, no belts

211

Soft Start
(Part of an entirety)

212

Meadows Operator Cab
(Part of an entirety) AC unit, cracked glass, no controls

213

Meadows Slab drop
(Part of an entirety) 32" x 12', 24" belt, air cylinder

214

Mill Entirety of Lots 206 to 213
With 10% raise.

214A

HMC Log Turner
Model: ZT12, SN: 64999, hydraulic drive

214B

Circular Saw Blade
52", P shanks

215

215A

Reckart Dust Blower
9" inlet, 8" outlet, 24" blower, includes elevated frame, electric drive

215B

8" PVC Pipe and Flex Pipe
8" x 50' pipe going from blower, flex pipe from saw to blower

215C

Cooks Automatic Band Sharper
Speed controller, sharpens up to 2" bands

215D

Cooks Band Roller
Hand crank

215E

2" Bands
New, approx. 50 pc.

216

Reckart Edger
4' x 10' infeed rolls, 2 moving saws, 60 hp motor, twin tailing belt, 1 belt 8" x 20' and 1 belt 18" x 20', MR642, includes starter

217

Live Roll Case
32" x 60', 6 1/2" x 24" rolls, electric drive, built in 3 strand pop-up transfer, 8' x 6'

218

Mellot Vibrating Conveyor
29" x 30', 24" pan, 8" side, electric drive

219

Mellot Vibrating Conveyor
5' fiberglass section, 29" x 60', 24" pan, 8" sides, electric drive

219A

Flat Conveyor Metal Detector
SN: 980513, Model: CR-85, 24" x 38" detector base, working condition

220

Meadows #2 Carriage
(1st of an entirety) 3 head block, 110 V over air, includes pantograph bar, 15' carriage, control in cab, digital setworks

221

Carriage Track & Frame
(Part of an entirety) 43 1/2" center to center, 54' long

222

Meadows Husk
(Part of an entirety) 56" saw, 6' x 8' main frame, 24" x 66" off-bear belt, hydraulic unit

223

Meadows Vertical Edger
(Part of an entirety) 6" x 36" capacity, 50 hp electric motor

224

Lincoln Electric Motor
(Part of an entirety) 160 hp, 1780 rpm, 445TL Frame, includes cutout

224A

Soft Start
(Part of an entirety) For 160 hp motor

225

Meadows Operator Cab
(Part of an entirety) 4' x 5', cracked glass, AC unit, no controls

226

Transfer Belt
(Part of an entirety) 30" x 24', electric drive

227

Entirety of Lots 220 to 226
With 10% raise.

228

Meadows Log Turner
36" hydraulic drive

229

3 Strand Log Deck
11'6" x 21'6", with stop'n'load, hydraulic cylinder, Tulsa winch drive, hydraulic drive, 3' skid sec.

229A

Barn Sweep Conveyor
Approx. 200' chain with 12" paddles, electric drive

230

2 Strand Cant Transfer
51" x 14' electric drive

231

Live Roll Case
3' x 17', 6 1/2" x 24" rolls, electric drive

232

Live Roll Case
34" x 24' - 6 1/2" x 24" rolls with 6' belt sec., 6' x 24" belt, electric drive

233

Conveyor Belt
2' x 29', wood sides, electric drive

234

Conveyor Belt
41 1/2" x 22', electric drive

235

Gtek Conveyor Belt
21" x 15'6", hydraulic drive

236

Live Roll Case
33" x 94" - 6" x 24" rolls, electric drive

237

Hemco Trim Saw
24', 22" blade, no sprockets on in feed, drop saw trimmer, 10 saws, control station

237A

6 Strand Transfer Deck
17' x 16', rubber board transfer wheels, electric drive

238

Mellot 4 Strand Unscrambler
12' x 11' 6" x 44" tall

239

4 Strand Transfer Deck
11' x 22', rooftop chains, electric drive

240

3 Strand Transfer Deck
10' x 20', rooftop chains, electric drive

241

4 Strand Green Chain
9'6" x 57', electric drive

242

4 Strand Green Chain
9'6" x 30', electric drive

243

Mellot Vibrating Conveyor
29" x 30', 21" pan, 8" sides, electric drive

244

Barn Sweep Conveyor
40" x 100' flat and 30' elevated

245

Precision Chipper
(1st of an entirety) Model: 58-15, SN: 03894, 58", 6 knives, no motor

246

Nema Premium Electric Motor
(Part of an entirety) 150 hp, 445T frame, 1490 rpm

246A

Electric Motor Soft Start
(Part of an entirety) 150 hp. motor starter

247

Precision Chip Shaker Screen
(Part of an entirety) 6 x 6 screen, SN: 5-1653, electric drive

248

Precision Cyclone and Pipe
(Part of an entirety) 5' cyclone, pipe to chipper

249

Chipper Entirety of Lots 245 to 248
With 10% raise.

250

Barn Sweep
40 1/2" x 34' elevated section, 12' flat section, 12" paddles, electric drive

251

Conveyor Belt
30" x 57', 18" belt, electric drive

252

Sullivan-Palatek Air Compressor
Model: DG30, SN: 21GE002326, meter reads: 1509 hours, screw type compressor, like new condition

253

2016 Great Lakes Refrigerant Air Dryer
Working condition

254

Electrical Boxes
Disconnect and breaker box, transformer, motor box

255

480 V Disconnect Box

256

Control Station
2 pc. Pedestal control boxes

257

Electric Motors and Gearboxes
20 hp, 3 hp Lesson with gearbox, 7.5 hp with hydraulic pump, motor mount

258

Carriage Part and Pulleys
Saw guide, Cleereman dog, rack for headblock

259

Electric Motors and Gearboxes

260

Hydraulic Motors for Tyrone Berry Feeds
3 pc., 1 should work

261

Gear Box Reverser for Meadows Mill
In good condition

262

Belts and Hoses
2 skids of parts

263

Electric Motor Control Center Siemens
20" x 7'6", assorted starters, 480 V. 800 amp

264

Air Cylinders
Cylinders for Cleereman carriage, hydraulic pumps

265

Electric Motor Starters
All parts on skid

266

Roller Chain and V-Belts
Used roller chain, all parts on 2 skids

267

2 Skids of Parts
Radiator, hydraulic hoses, pulleys, sprockets

268

Gearboxes and Parts
Idler wheel, pulleys, some Reman parts

269

Rolls and Belting, Carriage Wheels
All parts on skid

270

Square D Electrical Control Center
10' x 8' assorted starters, 600 amp

271

Square D Electrical Control Center
6' x 8' assorted starters, 600 amp

272

Electric Motor Soft Start
400 hp at 480 V max

273

Mellott #5 Log Turner
Chain type, 3' chain, hydraulic drive

274

Miller Welder
Model: AEAD-200LE, 140 amp max, Kohler gas engine, works

275

Dayton Air Compressor with Kohler
Model: Z960 compressor, Kohler Magnum 10 hp gas motor, works

299

HMC Rosserhead Debarker
Model: V206, SN: 1659-97, Slant track 4' x 4' cab with controls, 3" x 25" wheels, 14' outside wheels, aluminum head, 30 hp electric on head, 30' barn sweep, cat walk

300

Salem 7' Band Headrig
(1st of an entirety) Air strain, 13" x 7' band wheel, 28" x 7' steel slat off-bear web, no power

301

Salem 3 Headblock Carriage
(Part of an entirety) SN: 13023987, 110 V over air, dogs and tapers, electric setworks drive, 7' x 16' carriage, 40" opening, Silvatech controls

301A

Salem Control Panels
(Part of an entirety) Electrical boxes, control panel for control panels

301B

Silvatech Setworks
(Part of an entirety) Complete with monitor and control handles

301C

Tong Dog and Cylinder
(Part of an entirety) For Salem carriage

301D

Replacement Inserts
(Part of an entirety) For carriage wheels, 7 1/2" hub, 9 pc.

302

Track and Frame
(Part of an entirety) 54" c-c x 55', 6" x 8" I-Beam under track

303

Carriage Drive
(Part of an entirety) Cable Drum with hydraulic motor, frame it sits on, includes Tyrone Berry feed with 60 hp electric unit not complete

304

Bar Type Log Turner
(Part of an entirety) 7' bar, hydraulic cylinders

305

Operators Cab
(Part of an entirety) 5' x 7' x 7', AC unit, some control valves

306

Slab Drop Belt
(Part of an entirety) 42" x 13' overall, 30" x 11' belt, electric drive

307

Toshiba Electric Motor
(Part of an entirety) 250 hp, 1185 rpm, 460 V, frame N587UZ, 8 groove pulley, spins

308

Salem Mill Entirety of Lots 300 to 307
With 10% raise.

309

Steel Support Frame and Dust Box
5/8" x 10" x 10" I-Beams, 9'10" high, 10'4" x 7'9" wide

310

I-Beams Track Frame Support
3/8" x 6 1/2" x 12 1/2" I-beam track frame sits on, 58' long

311

Steel Support Structure
5/8" x 8" x 10" I-Beams, 9' total height, steel steps

312

Band Saw Blades
12" wide, length unknown, 7 pc.

313

Salem Guide Dressing Machine
Enclose cutters, electric drive

313A

Guide Blocks
15 pc. New 4 1/2" x 13 x 1 3/8"

321

Mattison 202 Straight Line Rip Saw
SN: 19102, 20 hp electric drive, 6" x 24" throat capacity, steel feed web

322

Reckart Dust Blower
22", 10" inlet, 8" x 9" outlet, no motor

323

3 Strand Pop-Up Transfer
76" x 64", no chains, hydraulic drive

324

Skate Rolls
5 pc. 36" x 10' with 2" rolls, 8 pc. 16" x 10' with 2" rolls

325

Skate Rolls
25 pc. 16" x 10' with 2" rolls

326

Skate Rolls
18 pc. 16" x 10' with 2" rolls

327

Precision Chipper
SN: C-3176, size: 58 x 15, 6 knives, no motor

328

Tyrone Berry Carriage Drive Feed
SN: 50233-6, SMA250, 100 hp electric motor, pump and directional valve

329

Armstrong Stretcher Roller
SN: 18202, #5 SR, needs parts

330

Belt Conveyor
27" x 10', 24" belt, 12" sides, no drive

331

Bar Type Log Turner
64" bar, with hydraulic cylinders

332

Eisele Chop Saw
NO.12H, 14" blade, 3.5 hp electric motor, 32" x 10' steel table on casters with 5/8" steel top

333

Rim with Tire
16 hole rim, rim 28"

334

Electric Motor
60 hp, 1755 rpm, 445T frame, good motor

335

Reliance Electric Motor
150 hp, 1785 rpm, 445T frame

336

Electric Motor
150 hp, 1790 rpm, 445T frame

337

Gearbox
Needs bearing

338

Belt Conveyor
36" x 17', elevated, electric motor, no belt, no gearbox

339

Roll Case with Stops
22" x 20', 6" x 13 1/2" rolls, 3 pop-up stops 24" apart, no drive

340

Live Roll Case
34" x 13', 9" x 24" rolls, electric drive, control box

341

Live Roll Case
32" x 18', 9" x 24" rolls, shaft with 4 sprockets for pop-up transfer, electric drive on shaft, no drive on rolls

342

4 Strand Transfer
112" x 34', cut out section no shafts, sprockets or chain

343

Concave Belt Conveyor
36' x 52', 24" belt, metal cover, electric drive

344

Salem 4 HB Carriage
SN: 502937-99, 110 V over air controls, electric setworks drive, 3 extra axles, pantograph arm

345

I-Beams
4pc. 9/16" x 12" x 12" x 27'

346

Dust Blower 38"
20" inlet, 11" x 16" outlet, no motor

347

Dead Rolls and Belt Conveyor
2 pc. 4' x 12', 4 1/2" x 42" rolls, 36" x 104" belt conveyor with 22" belt, no drive

348

Mandrel Shaft
3" x 9' shaft, 2 bearings, saw collar

349

Pantograph Arms and Post
1 pc. 14' x 17' round tube, 10' post, 1 pc. 14' x 17' square tube

350

351

Quick Attach Forks JRB
5" x 42"

352

Rockland Grapple Forks
Model: SG544J, SN: R37707, quick attach

355

365

Military 6 x 6 Dump Truck
SN: 8623-11201, made by Jeep, 5 ton capacity, 8' x 10' dump bed, 2' sides, could be running engine, mileage unknown, 6 cylinder diesel engine

366

City Aluminum Flatbed Trailer
SN: AF530304, 8' x 40', sliding strap ratchets, looks road worthy

367

Log Trailer
8' x 40', on road every day, rough condition

368

Rice Lake Survivor Scales
11' x 30' platform, includes printer, Macor control panel in office, Model: IQ+710-2A, working condition

Gay Brothers LumberPrevious Page Listing ID#: 1523576

Free Email Notifications

Share This Listing

Other Sales byThis Company

Sponsored Links

Gay Brothers Lumber

Login

Sign Up

Sign Up

Login

Gay Brothers Lumber
Previous Page Listing ID#: 1523576

Other Sales by
This Company