00

Information Lot
Type of Auction: Sawmill and Precut Line liquidation 

Highlight Pieces: Komatsu wheel loader, Toyota forklift, 3 Head Baker resaw, like new Millcreek sizer and chop saw, Baker de-duster, John Deere power unit and complete hydraulic system. Buyers have option to buy complete precut line and lease the building for up to two years. 

Auction/Seller Story: Green Ridge Wood Products in Baltic OH, is liquidating their complete sawmill and pre-cut line. Equipment such as Komatsu wheel loaders, Toyota forklifts, a 3 Head Baker resaw, like-new Millcreek sizer and chop saw, Baker de-duster, John Deere power unit, and hydraulic system will be sold at no reserve auction. Most equipment was purchased new in 2018 but is being sold due to the owner's battle with COVID-19 and their decision to pursue other income streams. Consignments are welcome with seller-provided unloading by appointment. Don't miss this chance to buy high-quality equipment from a reputable seller. Buyers have the option to buy the complete, late model, pre-cut line and lease the property for up to two years.

01

Preview Lot
Week of auction from 8-4 or by appointment. 

02

Loadout Information
Daniel (330-897-0909) will provide loading for smalls for the first 2 days after the auction. Everything must be removed in 30 days. 
Riggers: Nick Neuenshwander Metal Monkey 330.231.1490. By appointment only.

03

Payment Information
Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction.
 

10

3156G Live Heel Log Loader 1/50 Die-Cast Metal Replica
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s

11

Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

12

Heavy Equipment Key Set 36 Keys
Shipping available for $20

46

Jockey Grinder
MN: 97H, Milwaukee drill powered

47

Electric Saw Sharpener
Saw arbor guided

48

Signode Poly Banding Cart
MN: DF-10D, 1/2" poly strapping on cart, 1 roll 5/8" poly strapping

49

Signode Poly Banding Cart
MN: DD-1A, has 7/16" poly strapping

50

Banding Tools and Cart
Steel banding tightener and crimper, Signode model DF15 cart

51

Signode Banding Tool
Tightener and cutter, for 1/2" poly banding

60

Meadows # 2 Hydraulic Carriage 3 HB
(1st of an entirety) SN: 20-0027-02, 15' x 38" center to center wheel base, 110 V over hydraulic controls, hydraulic dogs, tapers, setworks, digital electronic setworks, panagraph, 2 headblock have live dogs and tapers, one is manual, New in 2002 not used hard, one owner used mostly for a hobby.

61

Wood Frame Husk 56"
(Part of an entirety) 4' x 7' frame, live outfeed rolls with hydraulic motor, 56" saw, no control valves, 20" dust blower pipe to bin

62

Track and Frame with Carriage Drive
(Part of an entirety) 45' track, cable drum with hydraulic motor and control valve

63

Roll Case
(Part of an entirety) 24" x 6' live roll case, 6 1/2" x 19 1/2" rolls, no drive

64

Meadows Mill Entirety of Lots 60-63
With 10% raise.

65

Meadows 40" Log Turner
Hydraulic drive, control valve

66

3 Strand Log Deck with Stop'n'Load
8' x 22' plus 42" nose skids, Tulsa winch drive with hydraulic motor, hydraulic stop'n'load

66A

56" Sawblade
B style

66B

Cable 3/8" for Carriage Drive
New cable, length unknown

67

Mud Saw
3/4" x 8" cutter, 6' arm, hydraulic drive, control valve

68

Hydraulic Tank and Pumps
(1st of an entirety) 3 hydraulic pumps, 54" x 48" x 36" tank, all hydraulic lines going to equipment and pumps

69

1989 Cummins Diesel Engine
(Part of an entirety) MN: C Series, 150 hp, 3352 hours, 8.3L, Model SP114P1 clutch with pulley, WinCo generator 2400 watts, 120 V, in very good condition

70

Line Shaft and Belts
(Part of an entirety) 2 7/16" x 16' shaft, pulleys and belts, belt tightener, steel supports

71

Diesel and Line Shaft Entirety of Lots 68-70
With 10% raise.

72

Meadows 3 Saw Edger
SN: 867X-66, 2 moving saws, 1 stationary saw, 4" x 36" capacity, hydraulic drive.

73

Dust Blower 16"
6" inlet, 4" outlet, no drive, includes pipe to bin

74

Irvington Swing Arm Chop Saw
Hydraulic motor, 14" blade

75

Skate Rolls
2 sections 20" x 10', 2 pc. 28" x 10'

76

Slab Racks
38" x 40", 4 pc.

77

Fuel Tank on Stand
30" x 48"

78

Air Tank
30" x 10'

100

Baker 3 Head Band Saw
(1st of an entirety) Model: BRR-O, SN: 98-2531, hydraulic motor on heads, hydraulic feed, 7/8" x 28' wheels, 1 1/4" bands, 6" feed belt, Air Bag blade tension, includes hydraulic control valves.

101

Cant Sizer Build By Millcreek Machine
(Part of an entirety) 5" cutter head carbide tips, hydraulic drive, 5" wide feed belt, hydraulic drive side press rolls, 6" dust outlet, includes hydraulic control valves, cant capacity 5 1/2" x 11".

102

Millcreek Machine Up Cut Chop Saw
(1st of an entirety) 22" blade hydraulic drive, air lift cylinder, dual press safety switch, 22" x 8' live out feed roll, air cylinder material stops.

103

Live In Feed Rolls Millcreek Machine
(Part of an entirety) 22" x 12', 4 1/2" x 18" rolls, air side press arms, hydraulic control valve.

104

3 Strand In Feed Deck
(Part of an entirety) 8' x 8' hydraulic drive

105

4 Strand Unscrambler
(Part of an entirety) 9' x 4' hydraulic drive, with air control valve

106

Live Out Feed Rolls
(Part of an entirety) 22" x 7', 4 1/2" x 18" rolls, hydraulic drive, air side kickers, automatic switch for kicker.

107

Skate Rolls
(Part of an entirety) 4 strand, 4 1/2' long, 6" x 6 1/2' landing table.

108

Cut Up Line Entirety of Lots 102 - 107
With 10% raise.

109

Turn Around Belt by Millcreek Machine
(Part of an entirety) 33" 68" belt, 6" x 66" popup transfer belt, sidekick cant transfer, hydraulic driven, air lift cylinder, air hydraulic control valve, 8" x 20" fill in table.

110

Live Transfer Belt
(Part of an entirety) 6" x 17' hydraulic drive, no controls.

111

Turn Around Table
(Part of an entirety) 33" x 88", 44" pop up live rolls.

112

Baker M4I Deduster
(Part of an entirety) Model: BDD-O, SN: 19-553, electric drive, 3 head Nylon brushes, with cut out box.

113

Live Out Feed Belt
(Part of an entirety) 44" x 20' electric drive

114

Groove Cutting Machine
(Part of an entirety) 1" wide cutting head, hydraulic drive, hydraulic feed rolls air press down, air hydraulic control valve.

115

Chop Saw
(Part of an entirety) 12" blade, 15" x 5' dead rolls, material stops, hydraulic drive, with air hydraulic control valve, manual cut.

116

42" Reckart Dust Blower
(Part of an entirety) 18" inlet, 18" outlet, hydraulic drive.

117

Dust Cyclone
(Part of an entirety) 6' x 12' with 18" pipe from blower. 1 pc. 18’’ x 18’ , 1pc. 18’’ x 8’ , 90 degree elbow

118

Dust Pipe
(Part of an entirety) All pipe from equipment to blower. 2 pc. 22 degree elbows , 1 pc 18’’ x 11’6’’ pipe , 58’ pipe stepped down with 6’’ x 6’ drops to equipment

119

John Deere Power Unit
(1st of an entirety) SN: PE6068H732172, 6.8L 225 hp, 3000 hours since complete rebuild, with NACD clutch.

120

Lima Mac Generator
(Part of an entirety) Model: 440MDL0861, SN LC-0000148-1514, 60 KW, 208/240 V, 440 frame, with cut out box, no wires included.

121

GE Transformer
(Part of an entirety) 75.0 KVA, 60HZ, 3 ph., electrical conduit with 50' wire included

122

Air Compressor
(Part of an entirety) SN: 010117-111, belt drive with adjustable mount.

123

Line Shaft and Hydraulics
(Part of an entirety) 700 gallon hydraulic tank, hydraulic pumps, hydraulic valves, line shaft, hydraulic lines going to equipment.

123A

John Deere Power Unit and Hydraulic System Entirety of Lot 119 - 123
With 10% raise.

124

124A

Wood-Mizer HR120 Resaw
MN: HR120G25, SN: 09091010, 25 hp, 2310 hours, Kohler Command Pro 25 gas engine, electric start, 12" x 6' feed belt, 1 1/4" bands, 7/8" x 19" wheels with v belts

124B

3 Electric Motors for Baker Resaw
MN: 1799A, 20 hp, 1765 rpm, 256 T frame, 3 ph, off of Baker resaw, 1 adjustable mount, cord, in good condition

125

Air Tank
9' x 3'

126

Fuel Tank
38" x 60" on skids

127

Fuel Tank
38" x 60" on skids

128

1 1/4" Bandsaw Blades
12 new blades

129

1 1/4" Bandsaw Blades
45 used blades

130

Self Dumping Hopper
1 cu. Yard hopper

131

Self Dumping Hopper
4' x 3' x 2'

132

Trash Hopper
6' x 5' x 4' hopper, with 7" x 3" fork pockets, heavy duty 3/8" metal

133

Scrap Rack
47" x 35" x 38"

134

Material Rack
15' long 40" at one end and 20" at other

135

Metal Shelf
10' long, 4' deep 6' tall

136

Swing Arm Cut Off Saw
Hydraulic drive 14" blade, 17' x 21" live in feed rolls hydraulic drive, 22" x 6' dead out feed rolls with material stops

137

Material Unscrambler
4 strand, 42" tall, 11' wide, hydraulic drive with air hydraulic control valve.

138

3 Strand In Feed Deck
9' x 9' hydraulic drive

139

Rip Saw
Set up for line shaft, 14" blade hydraulic drive feed rolls.

139A

Carbide Tip Blades 14"
1 1/2" arbor, 10 pc. Fresh sharpened

140

Accura Planer
Model: WJ28, SN 31211637, set up for line shaft.

141

Single Head Notcher
Manual loading with power feed, 9" wide head, set up for line shaft.

142

J.A. Fay Planer
Set up for line shaft.

143

Dado Cutter
Hydraulic drive, 1 1/2" wide blade.

144

Heavy Duty Drill Press
Model: 170F, hydraulic drive.

145

10" table saw
Model: TSC-10, SN: 47058, hydraulic drive.

146

Perkins Power Unit
2900 hours since complete rebuild, 4 cylinder diesel, with clutch.

147

Air Compressor
Belt drive, with adjustable mount

148

Line Shaft, Hydraulic Tank, and Hydraulic Pumps
3 hydraulic pumps

149

Air Tank
40" x 8'

150

Fuel Tank
67" x 3' with stand

151

36" Dust Blower
Hydraulic drive, with all pipes to and from blower

152

Storage Cabinet
32" wide x 6' tall x 24" deep

153

Material Rack
3' x 3' square 6' tall, 5 shelves

154

Material Racks
3' wide x 2' deep x 6' tall, 8' wide x 3' deep x 7' tall

155

Material Rack
4' wide x 3' deep x 6' tall

156

Material Rack
5' wide x 3' deep x 6' tall

157

Lumber Cart
3' wide x 6' long, two wheels swivel.

158

Board Stacking Rack
4' x 4' x 8' steel rack.

163

Toyota Forklift
Model: 7FGU18, SN: 61456, 7,742 hours, 2 stage mast, side shift, 4" x 42" forks, propane or regular gas, no tank included, solid rubber tires, 3300 lb capacity, 7' mast.

164

2005 Komatsu WA150-5 Wheel Loader
SN: KMTWA051C01071803
Meter reads: 6,328 hours
Engine: Komatsu 3.9L
Fuel type: Diesel
ROPS: Enclosed
3rd Valve: No
Tire Size: 17.5 R25
Attachments: Log forks
Heater: Yes
A/C: Yes
Quick Attach: No

Features and Notes: Joystick boom control, well maintained, one owner machine that is production ready.

164A

165

John Deere A Tractor
SN: 616435
Engine: 2 cylinder
Fuel type: Gas
Transmission: 4 speed standard
Drive: 2 wheel
Rear PTO: Yes
3 Point hitch: No

Features and Notes: Belt pulley, aux hydraulic, runs strong.

164B

Case W20C Wheel Loader*
2 lever boom control, no third valve, has heat/AC, pin on forks,sells with forks, runs and operates.

164C

Bucket for W20C*
Pin on dirt bucket.

165A

Massey Ferguson 50 Tractor*
SN: SGM5000I7
Meter reads: 1,367 hours
Engine: 4 cylinder
Transmission type: 3 speed with high and low
Fuel type: Gas
Rear PTO: Yes
3 Point hitch: Yes

Features and Notes: 1,367 hours after rebuilt, new battery, rubber on steel wheels. Contact Allen with any questions 330-600-0754
 

166

2001 John Deere 250 Skid Steer
SN: KV0250A251321
Meter reads: 18.5 hours
Engine: John Deere 2.9L
Fuel type: Diesel
ROPS: Open
2 Speed: No
Highflow: No
Attachments: None
A/C: No
Heater: No

Features and Notes: Over $9000 spent on overhaul for parts alone, new brake system, 18.5 hours on overhaul, low hours on new hydraulics, runs strong. 

166A

Quick Attach Forks
4" x 42" forks, skid steer quick attach

167

Hawk Line 3 Point Drag Grader
8', 3 pt. mount

168

Bessemer Hit and Miss Engine
Pulley with clutch

169

Ford Power Unit
MN: 786091-G15-TB, SN: AHE-0290-2BB, 3.7L, diesel, clutch with pulley

169A

Case Power Unit 4 Cylinder Diesel
SN: M56 CBLCCFCDECFAMKFAAKR, motor reads 3017 hours, clutch, control panel

170

4 Strand Transfer Deck
11' x 13', no drive

170A

2 Strand Transfer Deck
46" x 18', no chain, no sprockets, no drive

171

Dust Blower 36" Portable
13" inlet, 12" outlet, mounted on trailer, no power

172

Electric Motor and Gear Boxes
2 hp. Electric, 2 gear boxes

173

Deck Chain
All chain on pallet

174

Deck Chain 81X
All chain and sprocket on pallet

175

Sprockets and Pulley
Skid of parts, pulleys, sprockets, chain, connecting links

175A

Pulleys
Skid of used pulleys

176

Antique Chain Saws
Includes Stihl, Sears, Pioneer, Craftsman, McCulloch, Wright, Powerline, David Bradley, Condition unknown.

177

Hoffco Scythette Brush Cutter
SN: 9441, hand held brush cutter, 10" cutting bar, condition unknown.

178

Stacking Racks
1 pc. 4' x 4' x 4', 1 pc. 42" x 42" x 48", 1 pc. 36" x 48" x 38"

179

Stacking Shelves
36" x 36" x 8'

180

Pallet Racks
2 pc. 42" x 8' end frames, 6 pc. 8' cross members, 16 pc. 9' cross members, boards for shelfing

181

Slip on Dust Bucket
92" x 5" x 48", tie down chain

182

Wooden Scrap Box
6' x 42" x 42"

183

Deer Transport Box
4' x 44" x 36", 2 compartments, carry handles

184

Truck Box and Air Tanks
4' x 2' x 2' tool box, 2 pc. Vertical air tanks

185

Baker Control Boxes
Electrical breaker and fuse box with variable speed drive

186

Steel Lug Wheels
42" 6 hole steel wheels, 17-5L-24 Bolton tire, 13-6-28 bolt on tire

186A

Solid Rubber Wheels*
7" x 16" inside, 1 rim w/ tire 6.50 - 16. 3 pieces

187

Skid Steer Wheels with Solid Rubber Tires
30-10-16, 8 lugs

187A

Spartan Equipment Generator E9500
SN: GTB 6670, new unit, 20 and 30 amp outlets, portable

188

Lincoln Portable Welder
MN: AC 150, SN: A-952153, Kohler 10 hp gas engine.

189

Emglo Twin Tank Portable Air Compressor
10 hp Honda gas engine, engine not starting

190

Air Compressor on Tank
MN: 320, SN: 209605, Honda GX160 gas engine, vertical tank

191

Hawke Shop Press
60,000 lbs., no Jack

192

Slider Window
36" x 32" slider window

193

Work Bench Wood Top
7' x 30" workbench with vise, tool drawer. Contact Allen with any questions 330-600-0754

193A

Work Bench with drawers
6' x 24" x 35"

193B

Work Bench with drawers
6' x 24" x 35"

194

Hydraulic Tank, Rollers, and Deck Chain
24" x 16" x 12" hydraulic tank, 2 1/2" x 17 1/2" conveyor rolls, deck chain

195

Hydraulic Tank
18" x 18" x 16", valve and filter

196

V-Belts
New and used belts

197

New! Fuel Transfer Pump 12 V
New in box, includes wire and hose

197A

Gas Boy Fuel Pump
Manual pump with hose

198

Truck Hitch Adjustable
Fits 2" Reese hitch

199

Hydraulic Hose with Elbow Ends
3/4" hose, male pipe one end JIC elbow one end, assorted length, 11 pc.

199A

3" Coil Pallet Nails
11 boxes

199B

Sure Fit 3 1/2" Wire Coil Pallet Nails
12 1/2 boxes

199C

1" Coil Roofing Nails
1 box

199D

200

Do-All Metal Cutting Bandsaw
Model: DBW, SN: 2462917C, 220V 1ph, variable speed, edging stone, oiler, light, 16" throat capacity, electric drive. Contact Allen with any questions 330-600-0754

201

Kalamazoo Metal Bandsaw
Model: P-46, SN: 10123, 9" x 16" capacity, electric drive, 1 new blade #16. Contact Allen with any questions 330-600-0754

202

Kondia Powermill Milling Machine
Model: FV-1, SN: 102-1, electric drive, extra tools, power feed table. Contact Allen with any questions 330-600-0754

203

Brown Sharper Horizontal Milling Machine
Electric drive, lots of extra tooling. Contact Allen with any questions 330-600-0754

204

SIP Jig Boring Machine
Model: MP-3K, SN: 304, extra tooling, electric drive. Contact Allen with any questions 330-600-0754

205

Covel Surface Grinder
Model: 35, SN: 35-140, 8" x 24" capacity, electric drive. Contact Allen with any questions 330-600-0754

206

Hamond Surface Grinder
Model: 2, SN: 1116-51, 6" x 18" capacity, electric drive, Brown + Sharp Magnetic chuck, extra tooling. Contact Allen with any questions 330-600-0754

207

LeBlond Regal Metal Lathe
13" x 30" capacity, with tooling, electric drive. Contact Allen with any questions 330-600-0754

207A

Layout Plates
15" x 20", 3 pc. Contact Allen with any questions 330-600-0754

207B

Machinist Vice
8 1/2"

208

Klopp Metal Mill
Electric drive. Contact Allen with any questions 330-600-0754

209

Floor Model Drill Press
Heavy duty, electric drive, 6" throat, 4" stroke. Contact Allen with any questions 330-600-0754

210

Index Machine Vertical Mill
Electric drive, powered table. Contact Allen with any questions 330-600-0754

211

Royal Double Drill Press
SN: 16-21204, 8" throat, 5" stroke, electric drive. Contact Allen with any questions 330-600-0754

212

South Bend Lathe
10" x 30 capacity, extra tooling. Contact Allen with any questions 330-600-0754

213

Majestic Grinder Mill
ID-OD grinder. Contact Allen with any questions 330-600-0754

214

Floor Model Drill Press
4" stroke, 7" throat, electric drive, variable speed. Contact Allen with any questions 330-600-0754

215

Sonnet Honing Machine
Electric drive, extra stones. Contact Allen with any questions 330-600-0754

216

Scripta Pantograph Copy Mill
Operators manual. Contact Allen with any questions 330-600-0754

217

K.D. Lee Tool Cutter
Model: A600, SN: 1498, electric drive. Contact Allen with any questions 330-600-0754

218

Niagara Metal Shear
Model: 42-F, SN: 48966, Mild steel capacity 42" -16 ga, guide. Contact Allen with any questions 330-600-0754

219

Stacking Racks
30" x 41" x 8", 10 pc.

220

Fairbanks Platform Scales
With parts. Contact Allen with any questions 330-600-0754

221

CAT FC40 Tow Motor Battery Powered
SN: 544374, 15526 hours, 4" x 42" forks, 83" high mast, 2 stage, side shift, brakes need fixed, battery is weak, runs and operates. Contact Allen with any questions 330-600-0754

222

Hydraulic Pak
32" x 68" x 25" tanks, steel platform, 2 Baldor 30 hp. Electric motors with pumps, oil cooler radiator, wires to motors. Contact Allen with any questions 330-600-0754

223

Hydraulic Pak
4' x 5' x 2' tank on stand, 2 hydraulic pumps on mounts, air control valve, no power. Contact Allen with any questions 330-600-0754

224

Lumber Cart
28" x 90", tongue steer, solid rubber wheels. Contact Allen with any questions 330-600-0754

225

Bandsaw Blades and Parts
New 8 pc. 1 1/4" bandsaw blades for Wood-Mizer multi-head resaw, parts for Wood-Mizer resaw. Contact Allen with any questions 330-600-0754

226

Chains 5/16" with hooks
2 pc. 10", 1 pc. 7" Contact Allen with any questions 330-600-0754

227

Stihl MS 290 Chainsaw
20" bar, case. Contact Allen with any questions 330-600-0754

228

Ridge Metal Chopsaw 14"
Electric motor. Contact Allen with any questions 330-600-0754

229

Cleereman 36" Carriage
SN: 36-307, MN: 36, 3 head block, air dogs, tapers, setworks, 16' long, 50" wide center to center wheels, no control, 6" x 6" frame, 5/8" dogs. Contact Daniel Miller with any questions 440-321-5965

230

Timber Wolf Rosser Head Debarker
(1st of an entirety) hydraulic pump, runs and operates, extra pump and head motor, head hydraulic powered, bull wheels hydraulic powered, barn sweep bark conveyor, pantograph, 3" x 24" bull wheels, 12' outside to outside bull wheels, 30" x 16' capacity, 36" x 20' flat 16' slant barn sweep. Sold offsite. Location: 51584 TR 214B, Fresno, OH 43824

231

Perkins Power Unit
(Part of an entirety) MN: 5791/2400, SN: U137125G, 75 hp, 4760 hours, Murphy controls with shut down, no pump, in good condition. Sold offsite. Location: 51584 TR 214B, Fresno, OH 43824

232

Debarker Entirety of Lot 230-231
With 10% raise. Sold offsite. Location: 51584 TR 214B, Fresno, OH 43824

233

90-Degree Green Chain
Made by Mill Innovation Designs

234

Frevert Lathe*
Hydraulic drive. Contact Allen with any questions 330-600-0754

235

Delta Rockwell Drill Press*
3 head drill press, air powered with foot pedal control. Contact Allen with any questions 330-600-0754

236

Craftsman Rip Table*
8" blade, belt drive, no drive motor. Contact Allen with any questions 330-600-0754

237

Hankison After Cooler*
SN: T49097, Model: ACH 300, Air cooled, 2 electric drive fans, 300 CFM. Contact Allen with any questions 330-600-0754

238

22" Squirrel Cage Blower*
SN: 21287, setup for belt drive. Contact Allen with any questions 330-600-0754

239

Trailer Axle with Wheels and Tires*
3' long leaf springs. Contact Allen with any questions 330-600-0754

240

Steel Crate*
60" w x 30" deep, 44" high. Contact Allen with any questions 330-600-0754

241

Banding Tools
10 pc. tighteners and crimpers

242

Control cables, Oil Filters , and Belts
Control cable for encoder to computer, all parts on skid.

243

Welding Helmets
2 pc.

244

Chain Binders, Hydraulic Motor, Gauges, Wheels
All parts on skid

245

246

Tool Lot*
Hand tools, pipe fittings, air hose

247