Timed Machinery and Tool Auction
Previous Page Listing ID#: 1475516

Auction Location

Poseyville, IN 47633
Auction Dates and TimesSALE IS COMPLETED
Bidding Starts: Thursday Jan 12
Bidding Ends: Monday Jan 30
Auction Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
George Auction Group

Contact: Zachary George
Phone: (812) 431-3501
Email: zack@georgeauctiongroup.com
Website: https://www.georgeauctiongroup.com/

GoToAuction.com ID#: 10618
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Check out our website to view all listings at www.georgeauctiongroup.com Auction Features John Deere Skid steer, Wacker Mini Excavator, Golf carts, welders, pressure washers, hand grinders, band saws, school bus, fork lifts, scaffolding, walk boards, shears, many tools and much more! Equipment can be inspected at 241 North Saint Francis St, Poseyville, IN 47633. All Items can be previewed January 27th from 12:00pm to 4:00pm and 28th from 8:00am to 11:00am CST. Buyers Premium: 10% on all items Prior to bidding, all Internet Buyers must provide the information required by the auctioneer in order to be approved. All hour meters, odometers, tachometers are assumed correct, but will not be verified by George Auction Group. That is the buyers responsibility. Payments must be paid in FULL within 3 Business days. Pick up Times: January 31st - February 1st and 2nd from 8:00 - 4:00. Payment and Pick up may be made at same time ONLY if paying by cash. NO EXCEPTIONS Other payments can be made via the following methods: Wire Transfer: All Winning bids over $1000 are wire transfer only. Wire Fee of $25.00 for domestic and $70.00 for out of USA. Cashier's Check: Cashier's check, personal check or money order are all subject to a 7-10 day holding period before items can be picked up. Credit Card: A 3.25% fee will be added to all credit card payments. Successful bidders must contact us within 24 hours of the completion of the auction to verify method of payment. Out of the US purchases MUST be paid by wire. A $70.00 fee Will be added to all wire transfers to cover Bank Fees. Applicable Indiana State Sales Tax will be charged on all Lots. Bidders from outside the State will be exempt from Sales Tax if they provide an approved tax exemption status form and exception certificates that are acceptable to the State. Items must be picked up within 3 days or there will be a $25.00/day storage fee applied unless other arrangements are made. After 30 days, items will be resold, and no refund will be returned to customer. Buyer is responsible for all freight and handling charges. All shipping quotes are a $20.00 fee. ANY labor involved with shipping and/or loading with be billed at $85.00 per hour. WE DO NOT SHIP OUT OF US. Any buyers outside of US are responsible for ALL shipping and shipping Documents. We encourage self-inspections before bidding on any item. All Items Are Sold "AS IS WHERE IS" with no guarantees. All sales are final. Call with questions regarding this auction before making a bid. All title lots will have the titles sent 30 days after auction completion via certified mail. PLEASE DO NOT BID IF YOU DO NOT HAVE THE FUNDS!
Listing Information
Auction Features John Deere Skid steer, Wacker Mini Excavator, Several newer forkl ifts, Golf carts, welders, pressure washers, hand grinders, band saws, school bus, fork lifts, scaffolding, walk boards, shears, many tools and much more!

107
Leroi 660A Air Compressor
7.5hp Baldor Motor, Single phase, 230 Volt, V-Twin compressor. SN: 4018X7293

108
Job Box and contents
AG and S box, screw jacks, and some caster wheels

109
Job Box and Contents
Ag and S box, has jackets, scaffold joints, caster wheels

110
Scaffolding, Brackets and Braces
Several pallets of scaffolding, 3ft sections, 50- 4ft sections, several braces, some scaffolding with caster wheels, All one money

111
Large Crate of Welding Rod Ovens
several welding rods ovens, Phoenix brand ovens and several others. All one money

112
Portable Electric Panel
200 Amp Siemens breaker panel, 4 boxes with 4 outlets per box, Transformer from 440V to 220V, mounted on cart, cord with no end. EPP-400

113
Westinghouse Transformer
Westing house Transformer, Type EP single phase, Square D 30 amp 220 Volt 3 fuse box, 2- 70 amp load center with 2- 110v plug on each cord, Twist lock plug in on.

114
Portable Electric Panel
600 volt, 100 amp plug on cord, westing house box with 12 breakers, 12 110V plug-ins, 1- 220 Volt plug in Eppc-11

115
Portable Electric Panel
Appleton 600 Volt, 100 amp cord, westinghouse breaker panel with 8 -110v breakers and 2-220V breakers, has 220V and 110V plug ins EPPC-10

116
Portable Electric Panel
Siemens breaker box, with 8- 110V breakers and 2- 220V breakers, several 110V outlets, and 1 - 220V outlets, EPPC8

117
Portable Electric Panel
Appleton ACP-1033CD 600V 100Amp plug with cord, Seimens breaker box, 2-220 breakers, 8-110V breakers, several 110V plug-in, 1- 220V plug in EPPC-6

118
Portable Electric Panel
Westinghouse breaker box with breakers, 110v and 220V outlets EPPC4

119
Portable Electric Panel
GE breaker box, several outlets, 100amp cord with plug, EPPC3

120
Portable Electric Panel
Breaker box with 110V and 220V plug in 100 amp cord missing end. EPPC1

121
Portable Electric Panel
Acme transformer, breaker box with breakers, power outlets Disconnect and cord, no ends EPP-39

122
Karcher Parts Washer
Model H20-2530, Cude Parts washer, 230V single phase, was working unit when used last,

123
Red-D-Arc E300 Welder
SN: C1010400300 "Extreme duty DC electric welder" 40-250 amp, 250 amps, 30 volt

124
Red-D-Arc E300 Electric Welder
SN: C1950200390, 40-250 amp, AC/DC 250, Cord with end, Appleton ACP1034CD, no leads.

125
Red-D-Arc E300 Welder
SN: C197014725 Cord with no end, 40-250 amp, AC/DC Electric welder, no leads.

126
Red-D-Arc E300 Welder, AC/DC Electric
SN: C1990600636, No leads, Short cord with no end, 40-250 amp, DC, No leads.

127
Red-D-Arc E300 Welder, AC/DC Electric
SN: C1950200367, 40-250 amp, Cord with no end, no leads.

128
Red-D-Arc E300 Welder, AC/DC Electric
SN: C1010400305, 40-250 amp, Cord with no end, no leads.

129
Red-D-Arc E300 Welder, AC/DC Electric
SN: C1990600589, 40-250 amp, Cord with no end, no leads.

130
Red-D-Arc E300 Welder
SN: C1960200232, Electric Welder, 40-250 amp, On cart with wheels, cord with no end.

131
Red-D-Arc E300 Welder, AC/DC Electric
SN: C1950600209, 40-250 amp, Electric cord with no end, No leads on cart.

132
Central Machinery Drill Press
12 Speed, 1.5hp Motor, 120 Volt, 3/4" Chuck, 5ft Stand, Unit works.

133
Central Machinery 8" Drill Press
120 Volt, Adustable RPM, 4TM69, Unit works.

134
Delta 12" Drill Press DP-350
120 Volt, 12" Table, Varible speed. SN: 17-XL006981

135
4" Coppus Blower
120 Volt, with switch, has 20ft of cord, Unit works.

136
Greenlee 1399 Band Saw
115 Volt, 9 1/2" to 11" Capacity, 1/2 Baldor motor. Units work.

137
Holmatro Hydraulic Shear
1 1/2 hp, 115 Volt, 6" Jaws, Hydraulic tank, Working unit, JOL-3.

138
Lukas Hydraulic Shear
115 Volt, 5" Jaws, Self contained unit on cart, Unit works.

139
Lukas Hydraulic Shear
5" Jaws, 115 Volt, Self contained unit on wheels, JOL-1, Working unit.

140
Miller SRH-444 Welder
SN: HE762964, 230/400 Volt, 60% Duty cycle, 110V outlet, has groud clamp, missing plug-in, 3 phase.

141
Miller SRH333 Welder
SN: HK286507, 230/460 Volt, 3 Phase, 60 amp, No leads, missing power plug-in.

142
Miller Gold Star 600SS Welder
SN: JF889192, 230/460 Volt, No leads, missing power plug-in, 3 phase, 600 amp.

143
Miller DeHaweld 451 Wire Welder
SN: KA839698, 25KW, 3 phase, 200/260/460 Volt, has leads and pwoer plug-in, comes with Cobramatic wire feeder and gun, has Bernard gas regulator. All one money.

144
Pressure Testing Unit
Has cart and several valves

145
Pro Weld International Stud Welder
Single phase, 240 Volt, Includes gun, leads and power cord.

146
Tote of Rod Ovens
All different brands, Contents of tote.

147
Tote of Rod Ovens
All different brands, Contents of tote.

148
Knaack Job Box and Contents
Several Rod Ovens, 46-94

149
Knaack Job Box and Bench Grinders
Several Dewalt, portacable, etc, bench grinders, and all contents.

150
Knaack Job Box, Band Saws and Grinders
Contents of Job Box 73-03. Several portable band saws, Dewalt, Milwakee, several 4" grinders, 110V, Metabo, Bosech, Dewalt, All one money.

151
Wire Spooler on Stand
Wire spooling unit on heavy metal stand.

152
Sky Stage Ultra Man Basket
Basket for scaffolding with casters, aluminum frame. Comes with cables.

153
Sky Stage Ultra Man Basket
Basket for scaffolding with casters, aluminum frame. No cables included.

154
Scat Blast Sand Blasting Cabinet
Has air hose and regulator, glass window, and gloves.

155
Miller Bobcat Welder/Generator
Duetz diesel, Newer tires, Runs good, 8460 hrs, SN KK019719, Welds 40 to 400, Will need battery, L2286, Pintle hitch.

156
Miller Bobcat 250 Welder/Generator
Kubota Diesel, 944 hrs, 250 amps, Runs good, will need a battery, has lead racks, good tires, pintle hitch.

157
Speed Cut Chop Saw
480 Volt, Model 20, 10hp motor, 60 amp, missing plug-in.

158
Speed Cut Chop Saw
Model 20, 10hp, 220/440 Volt, SN: 210.100.03481, missing plug-in.

159
Concrete Saw-Sturdi-Saw
10hp Gas engine, water injection line, comes with blade.

160
Ridgid 535 Pipe Threader
Cart mounted, has some dies, foot pedal, 110 Volt, 24-005, unit does run.

161
Ridgid 535 Pipe Threader
Cart mounted, has some dies, foot pedal, 110 Volt, 535-15, unit does run.

162
Ridgid 535 Pipe Threader
110 Volt, cart mounted, has ID cutter, X2080, unit works.

163
Ridgid 1822 Pipe Threader
110 Volt, foot pedal, cart mounted, no dies, unit works.

164
Ridgid 535 Pipe Threader
110 Volt, cart mounted, 2 dies, working unit, X2083

165
Ridgid 535 Pipe Threader
110 Volt, cart mounted, 2 dies, working unit, X2083

166
Ridgid 535 Pipe Threader
X2085, 110 Volt, cart mounted, working unit.

167
Wilton Band Saw
6" Cut capacity, 120 Volt, 1/2 Motor, Working unit.

168
Greenlee Band Saw
1/2 hp, 120 Volt, 8" Cut capacity, Working unit.

169
Alkota Hot Water Pressure Washer
220 Volt, 50ft Hose and gun, Working unit, The heat does not work properly, has book, Stored inside. SN: 187477

170
2018 Wacker Neuson ET90 Excavator
2018 Wacker ET90, Brand new roadliner pads, 24" Bucket, Hydraulic thumb, Hydraulic coupler, Selectable controls, 2418hrs, Cab with heat and air, Runs and operates great. SN: WNCE1404LPAL01127

171
2007 Yale Veracitor 80V8 Forklift
GLP080LJNGBE089, Truck weight 15,420lbs, 9087 hrs, Lift weight 8000lbs, Pneumatic tire, LP Gas, Tank not included, No side shift, Load height 185 inches. SN:E813V04464D

172
Nissan 50 Cushion Tire Forklift
Nissan 50 Cushion Tire Forklift, LP Gas, 187" Lift height, 4750lb lift, 6ft Forks, Like new tires, Side shift, Triple stage mast, Lights work. LP Tank not included. SN: E837015

173
Nissan KCPH01A15PV Cushion Tire Forklift
Nissan KCPH01A15PV Cushion Tire Forklift, LP Gas, 130" Lift height, 3000lb Lift capacity, 42" Forks, Truck weights 5755lbs. LP Tank not included. SN: A906979

174
2014 Doosan D355-4 Pneumatic Tire Forklift
2014 Doosan D355-4 Pneumatic Tire Forklift, Diesel, 2591 hrs, 2 Speed, Triple stage mast, Sideshift, 60" Forks, Cab with heat and air, 7000lb Lift capacity, Brand new tires, Hydraulic fork positioners, Very nice forklift. SN: FD801-1880-02393

175
Caterpillar VC60C Pneumatic Tire Forklift
Caterpillar VC60C Pneumatic Tire Forklift, LP Gas, 6000lb Max lift, 188" Lift height, 48" Forks, Auxiliary hydraulics, Show 1569 hrs, LP tank not included, Runs and operates. SN: 89W093

177
2015 Toyota 8FG025 Pneumatic Tire Forklift
2015 Toyota 8FG025 Pneumatic Tire Forklift, Dual fuel gas or propane, Open cab, LP Gas, Tank not included, Triple stage mast with 42" forks, Side shift, 4750 Max lift, 170 Lift height, Toyota 4Y-ECS engine. SN: 63098

178
Toyota F620 Pneumatic Tire Forklift
LP Gas, 2 Stage lift, 4,000lb Lift, 42" Forks, 118" Lift height, Runs and operates, Does have coolant leak and wiring issue. LP Tank not included. SN: 19227

179
2001 John Deere 260 Skid Steer
2637 hrs, Open Station, H- pattern controls, Steel tracks over tires, Aux hydraulics on foot pedal, rear weights, no bucket, recent service, 69HP Diesel, 8250 lb operation weight, SN: KV0250A160454

180
1993 Chevy C60 School Bus
180,535 miles, 66 passenger, Automatic Transmission, 366 CI gas engine, steer tires are like new, Runs and Drives, brakes DO NOT work. SN: 1GBL7T1P6PJ109030

181
2010 Freightliner Sprinter 3500
Mercedes Diesel, 265,034 miles, Automatic transmission, Box measures 14ft long, 8ft wide, 1 ton chassis, has Thieman Electric Lift Gate that works good, Check engine light is on, Like new front tires. Runs and drives good. SN: WDPPF4CC5A9440215

182
2011 Isuzu NPR Box Truck
2011 Isuzu MPR Box Truck, Diesel engine, Automatic transmission, Cold A/C, Power windows, 16ft Box, Side door, Lift gate, Neptune bulk oil pump with 50ft hose, Runs and drives good, ABS light is on, 259,645 miles. SN: JALE5W164B7301554

183
2015 JLG 1932RS Slab Lift
2015 JLG 1932RS Slab Lift, Trogan Batteries, 260 hrs, 19ft Lift, 32" wide extendable platform, Runs and operates well. SN: 0200240760

184
Komatsu FG455T-7 Cushion Tire Forklift
Komatsu FG455T-7 Cushion Tire Forklift, 13,616 hrs, Open cab, LP Gas, Tank not included, 9,200lb lift capacity, 130" Lift height, 40" Forks, Side shift, 13,616 hrs, Lights work, New tires, Runs good, Side shift cylinder does leak. SN: 102173A

185
2006 Yale CP080L Pneumatic Tire Forklift
Yale CP080L Pneumatic Tire Forklift, Enclosed cab, 41.5 hrs, Gas engine, 122" Lift, 6,200lb capacity, 60" Forks, Hydraulic fork positioners, 19" to 78" wide,cab with heat, Front and rear wipers, Brand new tires, Runs and operates good. SN: E813V05338...

186
2008 Yale GLC080VX Cushion Tire Forklift
Yale GLC080VX Cushion Tire Forklift, LP Gas, Tank not included, 8300lb Lift capacity, 120" Lift height, 48" Forks, Side shift, Side curtain lights, LED Lights, Good tires. SN: E818V02589F

187
2006 Genie GS1930 Scissor Lift
2006 Genie GS1930 Scissor Lift, 472 hrs, 19ft Lift, 30" Extendable platform, on board charger, 110v outlet, Runs and operates good. SN: 076727

188
2018 Wacker Neuson EZ53 Mini Excavator
2018 Wacker Neuson EZ53 Mini Excavator, 1542 hrs, Hydraulic thumb, Like new tracks, Closed cab, VDS (cab tilts hydraulic for digging of grade), Manual coupler, 24" Tooth buckert, Perkins diesel, Fresh service, Cold A/C, Two speed, Runs and operates g...

194
2014 Polaris Ranger Diesel UTV
Diesel, 4x4, Differential lock, Hydrostatic transmission, Roof, Back glass, Tip-out front glass, 739 hrs, 4,139 miles, Runs and drives good, 12v outlet, Indiana title. SN: 4XA1D9JD2E7570196

189
Yale GLC030VX Cushion Tire Fork Lift
LP Gas, Finger tip controls, Sideshift, 187" Lift height, 2,800lb Max lift, 16,025 hrs, Open cab, Runs and operates good, New battery, New rear tires, LP tank not included. SN: C809V04958H

190
Danuser 19-16 Blade
6ft Rear blade, CAT 1 hitch, Reversable. SN: 8801

191
Club Car DS Golf Cart
48V Electric Cart, 8 Brand new batteries, Comes with charger, Aluminum dump bed, Top, Headlights, Fold down windshield, Runs and operates great. SN: AQ0328-299365

192
EZ-GO TXT Gas Freedom Golf Cart
EZ Go TXT Freedom Golf Cart, Gas, Has top, Windshield, Flat deck on back, Does not have a key, Has on/off switch, Runs and drives good, Headlights and tail lights, New seat cover. SN: 3215056

193
EZ-Go TXT Gas Golf Cart
EZ-Go TXT Gas Golf Cart, Has top windshield, Rear seat, Headlights, Kawasaki engine, Open cab, New battery, Runs and operates good.

195
2000 JLG 450AJ Z Boom Lift
2000 JLG 450AJ Z Boom Lift, GM Engine, Dual fuel, 45ft Max reach, 550 lb capacity, 38-15.5-16.5 Tires, 14,320 lbs, 4433 hrs.

196
2012 Yale GLC50VX Cushion Tire Forklift
2012 Yale GLC50VX Cushion Tire Forklift, LP Gas, 3 Stage with 189" Lift height, 4800 lb Max lift, Finger tip controls, 42" Forks, Side shift, LP tank not included, 34,971 hrs,Fork carrier is bent slightly - see photos. SN: A910V0668D

197
Custom made tilt trailer
Custom made trailer, 13ft long, 66" wide, Tilt deck trailer, 2-7,000lb axles, is missing front wheel and hub assemblies. No title.

198
McKiernan-Terry Hammer Attachment NO7
Pneumatic hammer, 2 sections with it weighs 5,200lbs, SN: 126885

199
McKiernan-Terry 9-B3 Pile Driving Hammer
Diesel hammer, 20 x 20 Hammer base, weighs 71lbs, Max 145 strokes per minute, 8750ft lb blow.


201
Scaffolding Walk Boards Titan
qty 6 Max load 500lb 24' x 24" x 5 1/4 walk boards

202
Scaffolding Walk Boards
qty 2 Titan 500lb Max load, 24' x 24" x 5 1/4 qty 3 Green Bull 25' x 24" x 6 1/2 750lb max load qty 1 Unknown brand 25' x 24" x 6 1/2 500lb max load

203
Scaffolding Walk Boards Werner Model 2620
qty 7 20' x 24" x 6", Task master aluminum stag, 500lb max load

204
Scaffolding Walk Boards
qty 1 Titan 20' x 24" x 5 1/4 500lb max load qty 1 S&K 20' x 20" x 6" 500lb max load qty 3 2620 20' x 24" x 6" 500lb max load qty 1 Greenbull 20' x 24" x 5" 500lb max load qty 1 Louisville 20' x 24" 6" 500lb max load

205
Scaffolding Walk Boards
qty 3 Tital 20' x 24" x 5 1/4, 500lb Walk boards qty 2 Greenbull 20' x 24" x 5 1/4" 500lb max load qty 3 Werner 2520 20' x 24" 5 1/4" 500lb max load qty 1 Werner 2520 Has walk railing 500lb max load

206
Scaffolding Walk Boards
qty 1 22' x 20" x 5 1/4" 500lb max load qty 1 16' x 20" x 5 1/4" 500lb max load qty 1 Werner cut 14' x 24" x 5" 500lb max load qty 1 cut 18' x 20" x 6" 500lb max load qty 1 cut 14' x 20" x 4" 500lb max load qty 1 Werner cut 16' x 24" x 6" 500lb max l...

207
Scaffolding Walk Boards
qty 1 Louisville 30' x 24" x 6" not cut, 500lb max load qty 2 Green Bull 26' x 24" x 6" not cut, 500lb max load qty 1 Werner 29' x 24" x 6" cut off, 500lb max load qty 1 Werner 30' x 24" x 6" cut off, 500lb max load qty 1 Werner 2632 27' x 24" x 6" c...

208
Scaffolding Walk Boards
qty 1 Werner 2024 24' x 12" x 5" 250lbs load capacity qty 1 Werner Taskmaster 2320 20" x 12" x 6' 500lb qty 1 Louisville 18' x 12" x 5 1/4" 250lb load capacity qty 1 Unknown 16' x 18" x 5/14" 250lb load capacity qty 1 Unknown 24' x 12" x 6" cut off...

209
Decking Walk Boards
qty 14 7' x 19" x 3 1/2" Aluminum scaffold platform with plywood deck.

210
Decking Walk Boards
7' x 19" x 3 1/2" Aluminum scaffold platform with plywood deck, Steel head decking, 750lb load psf.

211
11ft Rung Aluminum Ladder
15' total length 2" Square tubing 1" Round rungs



214
40 - High Bay Dome Lights
Cooper, Lithonia, Hiteck Brands, 120/208/240/277 Voltage capabilities.

215
Reznor Hanging Heater
115v, 95,900 BTU, 3" Exhaust, Natural or LP Gas. SN: 36279

216
Reznor Hanging Heater
Model LUS-125-F, 115v, 125,000 BTU, Natural or LP Gas. SN: GE182659

217
Reznor Hanging Heater
mODEL lus-125f, 115, 125,000 BTU. SN: GE18L660

218
Briggs and Stratton 3" Pump
8 hp Gas engine, 3" Pump, Does not run.

219
Stainless Steel Tank
48" Tall x 34" Across, Has ball valve drain kit.

220
Stainless Steel Tank
40"Tall x 32" Across, Has drain valve.

221
Stainless Steel Tank
51" Tall x 36" Across, Has 2" drain valve, Steel frame.

224
Yale Industrial Battery Charger
48v, 240v, 3 Phase charger for forklift, Working unit.

225
3 11R24.5 Tires on Alcoa aluminum wheels, 10 lug
3 11R24.5 Tires on Alcoa aluminum wheels, 10 lug. Tires are located off site.

226
2 445-50-22.5 Tires and wheels
2 445-50-22.5 Tires and wheels, Alcoa super single wheels, 10 lug wheels. Tires are located off site.

227
4 445/55/22.5 Tires
4 445/55/22.5 Tires on Aluminum Alcoa wheels. Tires are located off site.

228
4 275/80/22.5 Tires
4 275/80/22.5 Tires, no wheels. Tires are located off site.

229
4 445/35/22.5 Tires
4 445/35/22.5 Tires, comes with wheels. Tires are located off site.

230
Craftsman 2 Head Work Light
2 Bulbs, 115V, Stand and case.

231
Box of clamps
Contents of box. All one money.

232
Crate of Hand Trowels
Contents of crate. All one money.

233
John Deere Glass Door
Glass door for John Deere Skid Steer, unsure of model fitment. Buyer responsible for fitment.

234
Antique Bell
Bell and stand. Bell does have ringer.

235
WEN 8" Electric Pole Saw
Brand new 115V, Pole Saw


Auction License: Indiana
Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Sponsored Links

Timed Machinery and Tool Auction

George Auction Group

George Auction Group


Contact: Zachary George
Phone: (812) 431-3501
Sale Location
241 North Saint Francis St
Poseyville, IN 47633
Sale Dates and Times
Sale Terms and Conditions
Check out our website to view all listings at www.georgeauctiongroup.com Auction Features John Deere Skid steer, Wacker Mini Excavator, Golf carts, welders, pressure washers, hand grinders, band saws, school bus, fork lifts, scaffolding, walk boards, shears, many tools and much more! Equipment can be inspected at 241 North Saint Francis St, Poseyville, IN 47633. All Items can be previewed January 27th from 12:00pm to 4:00pm and 28th from 8:00am to 11:00am CST. Buyers Premium: 10% on all items Prior to bidding, all Internet Buyers must provide the information required by the auctioneer in order to be approved. All hour meters, odometers, tachometers are assumed correct, but will not be verified by George Auction Group. That is the buyers responsibility. Payments must be paid in FULL within 3 Business days. Pick up Times: January 31st - February 1st and 2nd from 8:00 - 4:00. Payment and Pick up may be made at same time ONLY if paying by cash. NO EXCEPTIONS Other payments can be made via the following methods: Wire Transfer: All Winning bids over $1000 are wire transfer only. Wire Fee of $25.00 for domestic and $70.00 for out of USA. Cashier's Check: Cashier's check, personal check or money order are all subject to a 7-10 day holding period before items can be picked up. Credit Card: A 3.25% fee will be added to all credit card payments. Successful bidders must contact us within 24 hours of the completion of the auction to verify method of payment. Out of the US purchases MUST be paid by wire. A $70.00 fee Will be added to all wire transfers to cover Bank Fees. Applicable Indiana State Sales Tax will be charged on all Lots. Bidders from outside the State will be exempt from Sales Tax if they provide an approved tax exemption status form and exception certificates that are acceptable to the State. Items must be picked up within 3 days or there will be a $25.00/day storage fee applied unless other arrangements are made. After 30 days, items will be resold, and no refund will be returned to customer. Buyer is responsible for all freight and handling charges. All shipping quotes are a $20.00 fee. ANY labor involved with shipping and/or loading with be billed at $85.00 per hour. WE DO NOT SHIP OUT OF US. Any buyers outside of US are responsible for ALL shipping and shipping Documents. We encourage self-inspections before bidding on any item. All Items Are Sold "AS IS WHERE IS" with no guarantees. All sales are final. Call with questions regarding this auction before making a bid. All title lots will have the titles sent 30 days after auction completion via certified mail. PLEASE DO NOT BID IF YOU DO NOT HAVE THE FUNDS!
Listing Details
Auction Features John Deere Skid steer, Wacker Mini Excavator, Several newer forkl ifts, Golf carts, welders, pressure washers, hand grinders, band saws, school bus, fork lifts, scaffolding, walk boards, shears, many tools and much more!

107
Leroi 660A Air Compressor
7.5hp Baldor Motor, Single phase, 230 Volt, V-Twin compressor. SN: 4018X7293

108
Job Box and contents
AG and S box, screw jacks, and some caster wheels

109
Job Box and Contents
Ag and S box, has jackets, scaffold joints, caster wheels

110
Scaffolding, Brackets and Braces
Several pallets of scaffolding, 3ft sections, 50- 4ft sections, several braces, some scaffolding with caster wheels, All one money

111
Large Crate of Welding Rod Ovens
several welding rods ovens, Phoenix brand ovens and several others. All one money

112
Portable Electric Panel
200 Amp Siemens breaker panel, 4 boxes with 4 outlets per box, Transformer from 440V to 220V, mounted on cart, cord with no end. EPP-400

113
Westinghouse Transformer
Westing house Transformer, Type EP single phase, Square D 30 amp 220 Volt 3 fuse box, 2- 70 amp load center with 2- 110v plug on each cord, Twist lock plug in on.

114
Portable Electric Panel
600 volt, 100 amp plug on cord, westing house box with 12 breakers, 12 110V plug-ins, 1- 220 Volt plug in Eppc-11

115
Portable Electric Panel
Appleton 600 Volt, 100 amp cord, westinghouse breaker panel with 8 -110v breakers and 2-220V breakers, has 220V and 110V plug ins EPPC-10

116
Portable Electric Panel
Siemens breaker box, with 8- 110V breakers and 2- 220V breakers, several 110V outlets, and 1 - 220V outlets, EPPC8

117
Portable Electric Panel
Appleton ACP-1033CD 600V 100Amp plug with cord, Seimens breaker box, 2-220 breakers, 8-110V breakers, several 110V plug-in, 1- 220V plug in EPPC-6

118
Portable Electric Panel
Westinghouse breaker box with breakers, 110v and 220V outlets EPPC4

119
Portable Electric Panel
GE breaker box, several outlets, 100amp cord with plug, EPPC3

120
Portable Electric Panel
Breaker box with 110V and 220V plug in 100 amp cord missing end. EPPC1

121
Portable Electric Panel
Acme transformer, breaker box with breakers, power outlets Disconnect and cord, no ends EPP-39

122
Karcher Parts Washer
Model H20-2530, Cude Parts washer, 230V single phase, was working unit when used last,

123
Red-D-Arc E300 Welder
SN: C1010400300 "Extreme duty DC electric welder" 40-250 amp, 250 amps, 30 volt

124
Red-D-Arc E300 Electric Welder
SN: C1950200390, 40-250 amp, AC/DC 250, Cord with end, Appleton ACP1034CD, no leads.

125
Red-D-Arc E300 Welder
SN: C197014725 Cord with no end, 40-250 amp, AC/DC Electric welder, no leads.

126
Red-D-Arc E300 Welder, AC/DC Electric
SN: C1990600636, No leads, Short cord with no end, 40-250 amp, DC, No leads.

127
Red-D-Arc E300 Welder, AC/DC Electric
SN: C1950200367, 40-250 amp, Cord with no end, no leads.

128
Red-D-Arc E300 Welder, AC/DC Electric
SN: C1010400305, 40-250 amp, Cord with no end, no leads.

129
Red-D-Arc E300 Welder, AC/DC Electric
SN: C1990600589, 40-250 amp, Cord with no end, no leads.

130
Red-D-Arc E300 Welder
SN: C1960200232, Electric Welder, 40-250 amp, On cart with wheels, cord with no end.

131
Red-D-Arc E300 Welder, AC/DC Electric
SN: C1950600209, 40-250 amp, Electric cord with no end, No leads on cart.

132
Central Machinery Drill Press
12 Speed, 1.5hp Motor, 120 Volt, 3/4" Chuck, 5ft Stand, Unit works.

133
Central Machinery 8" Drill Press
120 Volt, Adustable RPM, 4TM69, Unit works.

134
Delta 12" Drill Press DP-350
120 Volt, 12" Table, Varible speed. SN: 17-XL006981

135
4" Coppus Blower
120 Volt, with switch, has 20ft of cord, Unit works.

136
Greenlee 1399 Band Saw
115 Volt, 9 1/2" to 11" Capacity, 1/2 Baldor motor. Units work.

137
Holmatro Hydraulic Shear
1 1/2 hp, 115 Volt, 6" Jaws, Hydraulic tank, Working unit, JOL-3.

138
Lukas Hydraulic Shear
115 Volt, 5" Jaws, Self contained unit on cart, Unit works.

139
Lukas Hydraulic Shear
5" Jaws, 115 Volt, Self contained unit on wheels, JOL-1, Working unit.

140
Miller SRH-444 Welder
SN: HE762964, 230/400 Volt, 60% Duty cycle, 110V outlet, has groud clamp, missing plug-in, 3 phase.

141
Miller SRH333 Welder
SN: HK286507, 230/460 Volt, 3 Phase, 60 amp, No leads, missing power plug-in.

142
Miller Gold Star 600SS Welder
SN: JF889192, 230/460 Volt, No leads, missing power plug-in, 3 phase, 600 amp.

143
Miller DeHaweld 451 Wire Welder
SN: KA839698, 25KW, 3 phase, 200/260/460 Volt, has leads and pwoer plug-in, comes with Cobramatic wire feeder and gun, has Bernard gas regulator. All one money.

144
Pressure Testing Unit
Has cart and several valves

145
Pro Weld International Stud Welder
Single phase, 240 Volt, Includes gun, leads and power cord.

146
Tote of Rod Ovens
All different brands, Contents of tote.

147
Tote of Rod Ovens
All different brands, Contents of tote.

148
Knaack Job Box and Contents
Several Rod Ovens, 46-94

149
Knaack Job Box and Bench Grinders
Several Dewalt, portacable, etc, bench grinders, and all contents.

150
Knaack Job Box, Band Saws and Grinders
Contents of Job Box 73-03. Several portable band saws, Dewalt, Milwakee, several 4" grinders, 110V, Metabo, Bosech, Dewalt, All one money.

151
Wire Spooler on Stand
Wire spooling unit on heavy metal stand.

152
Sky Stage Ultra Man Basket
Basket for scaffolding with casters, aluminum frame. Comes with cables.

153
Sky Stage Ultra Man Basket
Basket for scaffolding with casters, aluminum frame. No cables included.

154
Scat Blast Sand Blasting Cabinet
Has air hose and regulator, glass window, and gloves.

155
Miller Bobcat Welder/Generator
Duetz diesel, Newer tires, Runs good, 8460 hrs, SN KK019719, Welds 40 to 400, Will need battery, L2286, Pintle hitch.

156
Miller Bobcat 250 Welder/Generator
Kubota Diesel, 944 hrs, 250 amps, Runs good, will need a battery, has lead racks, good tires, pintle hitch.

157
Speed Cut Chop Saw
480 Volt, Model 20, 10hp motor, 60 amp, missing plug-in.

158
Speed Cut Chop Saw
Model 20, 10hp, 220/440 Volt, SN: 210.100.03481, missing plug-in.

159
Concrete Saw-Sturdi-Saw
10hp Gas engine, water injection line, comes with blade.

160
Ridgid 535 Pipe Threader
Cart mounted, has some dies, foot pedal, 110 Volt, 24-005, unit does run.

161
Ridgid 535 Pipe Threader
Cart mounted, has some dies, foot pedal, 110 Volt, 535-15, unit does run.

162
Ridgid 535 Pipe Threader
110 Volt, cart mounted, has ID cutter, X2080, unit works.

163
Ridgid 1822 Pipe Threader
110 Volt, foot pedal, cart mounted, no dies, unit works.

164
Ridgid 535 Pipe Threader
110 Volt, cart mounted, 2 dies, working unit, X2083

165
Ridgid 535 Pipe Threader
110 Volt, cart mounted, 2 dies, working unit, X2083

166
Ridgid 535 Pipe Threader
X2085, 110 Volt, cart mounted, working unit.

167
Wilton Band Saw
6" Cut capacity, 120 Volt, 1/2 Motor, Working unit.

168
Greenlee Band Saw
1/2 hp, 120 Volt, 8" Cut capacity, Working unit.

169
Alkota Hot Water Pressure Washer
220 Volt, 50ft Hose and gun, Working unit, The heat does not work properly, has book, Stored inside. SN: 187477

170
2018 Wacker Neuson ET90 Excavator
2018 Wacker ET90, Brand new roadliner pads, 24" Bucket, Hydraulic thumb, Hydraulic coupler, Selectable controls, 2418hrs, Cab with heat and air, Runs and operates great. SN: WNCE1404LPAL01127

171
2007 Yale Veracitor 80V8 Forklift
GLP080LJNGBE089, Truck weight 15,420lbs, 9087 hrs, Lift weight 8000lbs, Pneumatic tire, LP Gas, Tank not included, No side shift, Load height 185 inches. SN:E813V04464D

172
Nissan 50 Cushion Tire Forklift
Nissan 50 Cushion Tire Forklift, LP Gas, 187" Lift height, 4750lb lift, 6ft Forks, Like new tires, Side shift, Triple stage mast, Lights work. LP Tank not included. SN: E837015

173
Nissan KCPH01A15PV Cushion Tire Forklift
Nissan KCPH01A15PV Cushion Tire Forklift, LP Gas, 130" Lift height, 3000lb Lift capacity, 42" Forks, Truck weights 5755lbs. LP Tank not included. SN: A906979

174
2014 Doosan D355-4 Pneumatic Tire Forklift
2014 Doosan D355-4 Pneumatic Tire Forklift, Diesel, 2591 hrs, 2 Speed, Triple stage mast, Sideshift, 60" Forks, Cab with heat and air, 7000lb Lift capacity, Brand new tires, Hydraulic fork positioners, Very nice forklift. SN: FD801-1880-02393

175
Caterpillar VC60C Pneumatic Tire Forklift
Caterpillar VC60C Pneumatic Tire Forklift, LP Gas, 6000lb Max lift, 188" Lift height, 48" Forks, Auxiliary hydraulics, Show 1569 hrs, LP tank not included, Runs and operates. SN: 89W093

177
2015 Toyota 8FG025 Pneumatic Tire Forklift
2015 Toyota 8FG025 Pneumatic Tire Forklift, Dual fuel gas or propane, Open cab, LP Gas, Tank not included, Triple stage mast with 42" forks, Side shift, 4750 Max lift, 170 Lift height, Toyota 4Y-ECS engine. SN: 63098

178
Toyota F620 Pneumatic Tire Forklift
LP Gas, 2 Stage lift, 4,000lb Lift, 42" Forks, 118" Lift height, Runs and operates, Does have coolant leak and wiring issue. LP Tank not included. SN: 19227

179
2001 John Deere 260 Skid Steer
2637 hrs, Open Station, H- pattern controls, Steel tracks over tires, Aux hydraulics on foot pedal, rear weights, no bucket, recent service, 69HP Diesel, 8250 lb operation weight, SN: KV0250A160454

180
1993 Chevy C60 School Bus
180,535 miles, 66 passenger, Automatic Transmission, 366 CI gas engine, steer tires are like new, Runs and Drives, brakes DO NOT work. SN: 1GBL7T1P6PJ109030

181
2010 Freightliner Sprinter 3500
Mercedes Diesel, 265,034 miles, Automatic transmission, Box measures 14ft long, 8ft wide, 1 ton chassis, has Thieman Electric Lift Gate that works good, Check engine light is on, Like new front tires. Runs and drives good. SN: WDPPF4CC5A9440215

182
2011 Isuzu NPR Box Truck
2011 Isuzu MPR Box Truck, Diesel engine, Automatic transmission, Cold A/C, Power windows, 16ft Box, Side door, Lift gate, Neptune bulk oil pump with 50ft hose, Runs and drives good, ABS light is on, 259,645 miles. SN: JALE5W164B7301554

183
2015 JLG 1932RS Slab Lift
2015 JLG 1932RS Slab Lift, Trogan Batteries, 260 hrs, 19ft Lift, 32" wide extendable platform, Runs and operates well. SN: 0200240760

184
Komatsu FG455T-7 Cushion Tire Forklift
Komatsu FG455T-7 Cushion Tire Forklift, 13,616 hrs, Open cab, LP Gas, Tank not included, 9,200lb lift capacity, 130" Lift height, 40" Forks, Side shift, 13,616 hrs, Lights work, New tires, Runs good, Side shift cylinder does leak. SN: 102173A

185
2006 Yale CP080L Pneumatic Tire Forklift
Yale CP080L Pneumatic Tire Forklift, Enclosed cab, 41.5 hrs, Gas engine, 122" Lift, 6,200lb capacity, 60" Forks, Hydraulic fork positioners, 19" to 78" wide,cab with heat, Front and rear wipers, Brand new tires, Runs and operates good. SN: E813V05338...

186
2008 Yale GLC080VX Cushion Tire Forklift
Yale GLC080VX Cushion Tire Forklift, LP Gas, Tank not included, 8300lb Lift capacity, 120" Lift height, 48" Forks, Side shift, Side curtain lights, LED Lights, Good tires. SN: E818V02589F

187
2006 Genie GS1930 Scissor Lift
2006 Genie GS1930 Scissor Lift, 472 hrs, 19ft Lift, 30" Extendable platform, on board charger, 110v outlet, Runs and operates good. SN: 076727

188
2018 Wacker Neuson EZ53 Mini Excavator
2018 Wacker Neuson EZ53 Mini Excavator, 1542 hrs, Hydraulic thumb, Like new tracks, Closed cab, VDS (cab tilts hydraulic for digging of grade), Manual coupler, 24" Tooth buckert, Perkins diesel, Fresh service, Cold A/C, Two speed, Runs and operates g...

194
2014 Polaris Ranger Diesel UTV
Diesel, 4x4, Differential lock, Hydrostatic transmission, Roof, Back glass, Tip-out front glass, 739 hrs, 4,139 miles, Runs and drives good, 12v outlet, Indiana title. SN: 4XA1D9JD2E7570196

189
Yale GLC030VX Cushion Tire Fork Lift
LP Gas, Finger tip controls, Sideshift, 187" Lift height, 2,800lb Max lift, 16,025 hrs, Open cab, Runs and operates good, New battery, New rear tires, LP tank not included. SN: C809V04958H

190
Danuser 19-16 Blade
6ft Rear blade, CAT 1 hitch, Reversable. SN: 8801

191
Club Car DS Golf Cart
48V Electric Cart, 8 Brand new batteries, Comes with charger, Aluminum dump bed, Top, Headlights, Fold down windshield, Runs and operates great. SN: AQ0328-299365

192
EZ-GO TXT Gas Freedom Golf Cart
EZ Go TXT Freedom Golf Cart, Gas, Has top, Windshield, Flat deck on back, Does not have a key, Has on/off switch, Runs and drives good, Headlights and tail lights, New seat cover. SN: 3215056

193
EZ-Go TXT Gas Golf Cart
EZ-Go TXT Gas Golf Cart, Has top windshield, Rear seat, Headlights, Kawasaki engine, Open cab, New battery, Runs and operates good.

195
2000 JLG 450AJ Z Boom Lift
2000 JLG 450AJ Z Boom Lift, GM Engine, Dual fuel, 45ft Max reach, 550 lb capacity, 38-15.5-16.5 Tires, 14,320 lbs, 4433 hrs.

196
2012 Yale GLC50VX Cushion Tire Forklift
2012 Yale GLC50VX Cushion Tire Forklift, LP Gas, 3 Stage with 189" Lift height, 4800 lb Max lift, Finger tip controls, 42" Forks, Side shift, LP tank not included, 34,971 hrs,Fork carrier is bent slightly - see photos. SN: A910V0668D

197
Custom made tilt trailer
Custom made trailer, 13ft long, 66" wide, Tilt deck trailer, 2-7,000lb axles, is missing front wheel and hub assemblies. No title.

198
McKiernan-Terry Hammer Attachment NO7
Pneumatic hammer, 2 sections with it weighs 5,200lbs, SN: 126885

199
McKiernan-Terry 9-B3 Pile Driving Hammer
Diesel hammer, 20 x 20 Hammer base, weighs 71lbs, Max 145 strokes per minute, 8750ft lb blow.


201
Scaffolding Walk Boards Titan
qty 6 Max load 500lb 24' x 24" x 5 1/4 walk boards

202
Scaffolding Walk Boards
qty 2 Titan 500lb Max load, 24' x 24" x 5 1/4 qty 3 Green Bull 25' x 24" x 6 1/2 750lb max load qty 1 Unknown brand 25' x 24" x 6 1/2 500lb max load

203
Scaffolding Walk Boards Werner Model 2620
qty 7 20' x 24" x 6", Task master aluminum stag, 500lb max load

204
Scaffolding Walk Boards
qty 1 Titan 20' x 24" x 5 1/4 500lb max load qty 1 S&K 20' x 20" x 6" 500lb max load qty 3 2620 20' x 24" x 6" 500lb max load qty 1 Greenbull 20' x 24" x 5" 500lb max load qty 1 Louisville 20' x 24" 6" 500lb max load

205
Scaffolding Walk Boards
qty 3 Tital 20' x 24" x 5 1/4, 500lb Walk boards qty 2 Greenbull 20' x 24" x 5 1/4" 500lb max load qty 3 Werner 2520 20' x 24" 5 1/4" 500lb max load qty 1 Werner 2520 Has walk railing 500lb max load

206
Scaffolding Walk Boards
qty 1 22' x 20" x 5 1/4" 500lb max load qty 1 16' x 20" x 5 1/4" 500lb max load qty 1 Werner cut 14' x 24" x 5" 500lb max load qty 1 cut 18' x 20" x 6" 500lb max load qty 1 cut 14' x 20" x 4" 500lb max load qty 1 Werner cut 16' x 24" x 6" 500lb max l...

207
Scaffolding Walk Boards
qty 1 Louisville 30' x 24" x 6" not cut, 500lb max load qty 2 Green Bull 26' x 24" x 6" not cut, 500lb max load qty 1 Werner 29' x 24" x 6" cut off, 500lb max load qty 1 Werner 30' x 24" x 6" cut off, 500lb max load qty 1 Werner 2632 27' x 24" x 6" c...

208
Scaffolding Walk Boards
qty 1 Werner 2024 24' x 12" x 5" 250lbs load capacity qty 1 Werner Taskmaster 2320 20" x 12" x 6' 500lb qty 1 Louisville 18' x 12" x 5 1/4" 250lb load capacity qty 1 Unknown 16' x 18" x 5/14" 250lb load capacity qty 1 Unknown 24' x 12" x 6" cut off...

209
Decking Walk Boards
qty 14 7' x 19" x 3 1/2" Aluminum scaffold platform with plywood deck.

210
Decking Walk Boards
7' x 19" x 3 1/2" Aluminum scaffold platform with plywood deck, Steel head decking, 750lb load psf.

211
11ft Rung Aluminum Ladder
15' total length 2" Square tubing 1" Round rungs



214
40 - High Bay Dome Lights
Cooper, Lithonia, Hiteck Brands, 120/208/240/277 Voltage capabilities.

215
Reznor Hanging Heater
115v, 95,900 BTU, 3" Exhaust, Natural or LP Gas. SN: 36279

216
Reznor Hanging Heater
Model LUS-125-F, 115v, 125,000 BTU, Natural or LP Gas. SN: GE182659

217
Reznor Hanging Heater
mODEL lus-125f, 115, 125,000 BTU. SN: GE18L660

218
Briggs and Stratton 3" Pump
8 hp Gas engine, 3" Pump, Does not run.

219
Stainless Steel Tank
48" Tall x 34" Across, Has ball valve drain kit.

220
Stainless Steel Tank
40"Tall x 32" Across, Has drain valve.

221
Stainless Steel Tank
51" Tall x 36" Across, Has 2" drain valve, Steel frame.

224
Yale Industrial Battery Charger
48v, 240v, 3 Phase charger for forklift, Working unit.

225
3 11R24.5 Tires on Alcoa aluminum wheels, 10 lug
3 11R24.5 Tires on Alcoa aluminum wheels, 10 lug. Tires are located off site.

226
2 445-50-22.5 Tires and wheels
2 445-50-22.5 Tires and wheels, Alcoa super single wheels, 10 lug wheels. Tires are located off site.

227
4 445/55/22.5 Tires
4 445/55/22.5 Tires on Aluminum Alcoa wheels. Tires are located off site.

228
4 275/80/22.5 Tires
4 275/80/22.5 Tires, no wheels. Tires are located off site.

229
4 445/35/22.5 Tires
4 445/35/22.5 Tires, comes with wheels. Tires are located off site.

230
Craftsman 2 Head Work Light
2 Bulbs, 115V, Stand and case.

231
Box of clamps
Contents of box. All one money.

232
Crate of Hand Trowels
Contents of crate. All one money.

233
John Deere Glass Door
Glass door for John Deere Skid Steer, unsure of model fitment. Buyer responsible for fitment.

234
Antique Bell
Bell and stand. Bell does have ringer.

235
WEN 8" Electric Pole Saw
Brand new 115V, Pole Saw

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Timed Machinery and Tool Auction
 Online Only Auction
Auction Date(s)
Bidding Starts: Thursday Jan 12
Bidding Ends: Monday Jan 30
Auction Location

Poseyville, IN 47633
Company
George Auction Group

Contact: Zachary George
Phone: (812) 431-3501
Website: https://www.georgeauctiongroup.com/

Listing Terms and Conditions
Check out our website to view all listings at www.georgeauctiongroup.com Auction Features John Deere Skid steer, Wacker Mini Excavator, Golf carts, welders, pressure washers, hand grinders, band saws, school bus, fork lifts, scaffolding, walk boards, shears, many tools and much more! Equipment can be inspected at 241 North Saint Francis St, Poseyville, IN 47633. All Items can be previewed January 27th from 12:00pm to 4:00pm and 28th from 8:00am to 11:00am CST. Buyers Premium: 10% on all items Prior to bidding, all Internet Buyers must provide the information required by the auctioneer in order to be approved. All hour meters, odometers, tachometers are assumed correct, but will not be verified by George Auction Group. That is the buyers responsibility. Payments must be paid in FULL within 3 Business days. Pick up Times: January 31st - February 1st and 2nd from 8:00 - 4:00. Payment and Pick up may be made at same time ONLY if paying by cash. NO EXCEPTIONS Other payments can be made via the following methods: Wire Transfer: All Winning bids over $1000 are wire transfer only. Wire Fee of $25.00 for domestic and $70.00 for out of USA. Cashier's Check: Cashier's check, personal check or money order are all subject to a 7-10 day holding period before items can be picked up. Credit Card: A 3.25% fee will be added to all credit card payments. Successful bidders must contact us within 24 hours of the completion of the auction to verify method of payment. Out of the US purchases MUST be paid by wire. A $70.00 fee Will be added to all wire transfers to cover Bank Fees. Applicable Indiana State Sales Tax will be charged on all Lots. Bidders from outside the State will be exempt from Sales Tax if they provide an approved tax exemption status form and exception certificates that are acceptable to the State. Items must be picked up within 3 days or there will be a $25.00/day storage fee applied unless other arrangements are made. After 30 days, items will be resold, and no refund will be returned to customer. Buyer is responsible for all freight and handling charges. All shipping quotes are a $20.00 fee. ANY labor involved with shipping and/or loading with be billed at $85.00 per hour. WE DO NOT SHIP OUT OF US. Any buyers outside of US are responsible for ALL shipping and shipping Documents. We encourage self-inspections before bidding on any item. All Items Are Sold "AS IS WHERE IS" with no guarantees. All sales are final. Call with questions regarding this auction before making a bid. All title lots will have the titles sent 30 days after auction completion via certified mail. PLEASE DO NOT BID IF YOU DO NOT HAVE THE FUNDS!
Auction Features John Deere Skid steer, Wacker Mini Excavator, Several newer forkl ifts, Golf carts, welders, pressure washers, hand grinders, band saws, school bus, fork lifts, scaffolding, walk boards, shears, many tools and much more!

107
Leroi 660A Air Compressor
7.5hp Baldor Motor, Single phase, 230 Volt, V-Twin compressor. SN: 4018X7293

108
Job Box and contents
AG and S box, screw jacks, and some caster wheels

109
Job Box and Contents
Ag and S box, has jackets, scaffold joints, caster wheels

110
Scaffolding, Brackets and Braces
Several pallets of scaffolding, 3ft sections, 50- 4ft sections, several braces, some scaffolding with caster wheels, All one money

111
Large Crate of Welding Rod Ovens
several welding rods ovens, Phoenix brand ovens and several others. All one money

112
Portable Electric Panel
200 Amp Siemens breaker panel, 4 boxes with 4 outlets per box, Transformer from 440V to 220V, mounted on cart, cord with no end. EPP-400

113
Westinghouse Transformer
Westing house Transformer, Type EP single phase, Square D 30 amp 220 Volt 3 fuse box, 2- 70 amp load center with 2- 110v plug on each cord, Twist lock plug in on.

114
Portable Electric Panel
600 volt, 100 amp plug on cord, westing house box with 12 breakers, 12 110V plug-ins, 1- 220 Volt plug in Eppc-11

115
Portable Electric Panel
Appleton 600 Volt, 100 amp cord, westinghouse breaker panel with 8 -110v breakers and 2-220V breakers, has 220V and 110V plug ins EPPC-10

116
Portable Electric Panel
Siemens breaker box, with 8- 110V breakers and 2- 220V breakers, several 110V outlets, and 1 - 220V outlets, EPPC8

117
Portable Electric Panel
Appleton ACP-1033CD 600V 100Amp plug with cord, Seimens breaker box, 2-220 breakers, 8-110V breakers, several 110V plug-in, 1- 220V plug in EPPC-6

118
Portable Electric Panel
Westinghouse breaker box with breakers, 110v and 220V outlets EPPC4

119
Portable Electric Panel
GE breaker box, several outlets, 100amp cord with plug, EPPC3

120
Portable Electric Panel
Breaker box with 110V and 220V plug in 100 amp cord missing end. EPPC1

121
Portable Electric Panel
Acme transformer, breaker box with breakers, power outlets Disconnect and cord, no ends EPP-39

122
Karcher Parts Washer
Model H20-2530, Cude Parts washer, 230V single phase, was working unit when used last,

123
Red-D-Arc E300 Welder
SN: C1010400300 "Extreme duty DC electric welder" 40-250 amp, 250 amps, 30 volt

124
Red-D-Arc E300 Electric Welder
SN: C1950200390, 40-250 amp, AC/DC 250, Cord with end, Appleton ACP1034CD, no leads.

125
Red-D-Arc E300 Welder
SN: C197014725 Cord with no end, 40-250 amp, AC/DC Electric welder, no leads.

126
Red-D-Arc E300 Welder, AC/DC Electric
SN: C1990600636, No leads, Short cord with no end, 40-250 amp, DC, No leads.

127
Red-D-Arc E300 Welder, AC/DC Electric
SN: C1950200367, 40-250 amp, Cord with no end, no leads.

128
Red-D-Arc E300 Welder, AC/DC Electric
SN: C1010400305, 40-250 amp, Cord with no end, no leads.

129
Red-D-Arc E300 Welder, AC/DC Electric
SN: C1990600589, 40-250 amp, Cord with no end, no leads.

130
Red-D-Arc E300 Welder
SN: C1960200232, Electric Welder, 40-250 amp, On cart with wheels, cord with no end.

131
Red-D-Arc E300 Welder, AC/DC Electric
SN: C1950600209, 40-250 amp, Electric cord with no end, No leads on cart.

132
Central Machinery Drill Press
12 Speed, 1.5hp Motor, 120 Volt, 3/4" Chuck, 5ft Stand, Unit works.

133
Central Machinery 8" Drill Press
120 Volt, Adustable RPM, 4TM69, Unit works.

134
Delta 12" Drill Press DP-350
120 Volt, 12" Table, Varible speed. SN: 17-XL006981

135
4" Coppus Blower
120 Volt, with switch, has 20ft of cord, Unit works.

136
Greenlee 1399 Band Saw
115 Volt, 9 1/2" to 11" Capacity, 1/2 Baldor motor. Units work.

137
Holmatro Hydraulic Shear
1 1/2 hp, 115 Volt, 6" Jaws, Hydraulic tank, Working unit, JOL-3.

138
Lukas Hydraulic Shear
115 Volt, 5" Jaws, Self contained unit on cart, Unit works.

139
Lukas Hydraulic Shear
5" Jaws, 115 Volt, Self contained unit on wheels, JOL-1, Working unit.

140
Miller SRH-444 Welder
SN: HE762964, 230/400 Volt, 60% Duty cycle, 110V outlet, has groud clamp, missing plug-in, 3 phase.

141
Miller SRH333 Welder
SN: HK286507, 230/460 Volt, 3 Phase, 60 amp, No leads, missing power plug-in.

142
Miller Gold Star 600SS Welder
SN: JF889192, 230/460 Volt, No leads, missing power plug-in, 3 phase, 600 amp.

143
Miller DeHaweld 451 Wire Welder
SN: KA839698, 25KW, 3 phase, 200/260/460 Volt, has leads and pwoer plug-in, comes with Cobramatic wire feeder and gun, has Bernard gas regulator. All one money.

144
Pressure Testing Unit
Has cart and several valves

145
Pro Weld International Stud Welder
Single phase, 240 Volt, Includes gun, leads and power cord.

146
Tote of Rod Ovens
All different brands, Contents of tote.

147
Tote of Rod Ovens
All different brands, Contents of tote.

148
Knaack Job Box and Contents
Several Rod Ovens, 46-94

149
Knaack Job Box and Bench Grinders
Several Dewalt, portacable, etc, bench grinders, and all contents.

150
Knaack Job Box, Band Saws and Grinders
Contents of Job Box 73-03. Several portable band saws, Dewalt, Milwakee, several 4" grinders, 110V, Metabo, Bosech, Dewalt, All one money.

151
Wire Spooler on Stand
Wire spooling unit on heavy metal stand.

152
Sky Stage Ultra Man Basket
Basket for scaffolding with casters, aluminum frame. Comes with cables.

153
Sky Stage Ultra Man Basket
Basket for scaffolding with casters, aluminum frame. No cables included.

154
Scat Blast Sand Blasting Cabinet
Has air hose and regulator, glass window, and gloves.

155
Miller Bobcat Welder/Generator
Duetz diesel, Newer tires, Runs good, 8460 hrs, SN KK019719, Welds 40 to 400, Will need battery, L2286, Pintle hitch.

156
Miller Bobcat 250 Welder/Generator
Kubota Diesel, 944 hrs, 250 amps, Runs good, will need a battery, has lead racks, good tires, pintle hitch.

157
Speed Cut Chop Saw
480 Volt, Model 20, 10hp motor, 60 amp, missing plug-in.

158
Speed Cut Chop Saw
Model 20, 10hp, 220/440 Volt, SN: 210.100.03481, missing plug-in.

159
Concrete Saw-Sturdi-Saw
10hp Gas engine, water injection line, comes with blade.

160
Ridgid 535 Pipe Threader
Cart mounted, has some dies, foot pedal, 110 Volt, 24-005, unit does run.

161
Ridgid 535 Pipe Threader
Cart mounted, has some dies, foot pedal, 110 Volt, 535-15, unit does run.

162
Ridgid 535 Pipe Threader
110 Volt, cart mounted, has ID cutter, X2080, unit works.

163
Ridgid 1822 Pipe Threader
110 Volt, foot pedal, cart mounted, no dies, unit works.

164
Ridgid 535 Pipe Threader
110 Volt, cart mounted, 2 dies, working unit, X2083

165
Ridgid 535 Pipe Threader
110 Volt, cart mounted, 2 dies, working unit, X2083

166
Ridgid 535 Pipe Threader
X2085, 110 Volt, cart mounted, working unit.

167
Wilton Band Saw
6" Cut capacity, 120 Volt, 1/2 Motor, Working unit.

168
Greenlee Band Saw
1/2 hp, 120 Volt, 8" Cut capacity, Working unit.

169
Alkota Hot Water Pressure Washer
220 Volt, 50ft Hose and gun, Working unit, The heat does not work properly, has book, Stored inside. SN: 187477

170
2018 Wacker Neuson ET90 Excavator
2018 Wacker ET90, Brand new roadliner pads, 24" Bucket, Hydraulic thumb, Hydraulic coupler, Selectable controls, 2418hrs, Cab with heat and air, Runs and operates great. SN: WNCE1404LPAL01127

171
2007 Yale Veracitor 80V8 Forklift
GLP080LJNGBE089, Truck weight 15,420lbs, 9087 hrs, Lift weight 8000lbs, Pneumatic tire, LP Gas, Tank not included, No side shift, Load height 185 inches. SN:E813V04464D

172
Nissan 50 Cushion Tire Forklift
Nissan 50 Cushion Tire Forklift, LP Gas, 187" Lift height, 4750lb lift, 6ft Forks, Like new tires, Side shift, Triple stage mast, Lights work. LP Tank not included. SN: E837015

173
Nissan KCPH01A15PV Cushion Tire Forklift
Nissan KCPH01A15PV Cushion Tire Forklift, LP Gas, 130" Lift height, 3000lb Lift capacity, 42" Forks, Truck weights 5755lbs. LP Tank not included. SN: A906979

174
2014 Doosan D355-4 Pneumatic Tire Forklift
2014 Doosan D355-4 Pneumatic Tire Forklift, Diesel, 2591 hrs, 2 Speed, Triple stage mast, Sideshift, 60" Forks, Cab with heat and air, 7000lb Lift capacity, Brand new tires, Hydraulic fork positioners, Very nice forklift. SN: FD801-1880-02393

175
Caterpillar VC60C Pneumatic Tire Forklift
Caterpillar VC60C Pneumatic Tire Forklift, LP Gas, 6000lb Max lift, 188" Lift height, 48" Forks, Auxiliary hydraulics, Show 1569 hrs, LP tank not included, Runs and operates. SN: 89W093

177
2015 Toyota 8FG025 Pneumatic Tire Forklift
2015 Toyota 8FG025 Pneumatic Tire Forklift, Dual fuel gas or propane, Open cab, LP Gas, Tank not included, Triple stage mast with 42" forks, Side shift, 4750 Max lift, 170 Lift height, Toyota 4Y-ECS engine. SN: 63098

178
Toyota F620 Pneumatic Tire Forklift
LP Gas, 2 Stage lift, 4,000lb Lift, 42" Forks, 118" Lift height, Runs and operates, Does have coolant leak and wiring issue. LP Tank not included. SN: 19227

179
2001 John Deere 260 Skid Steer
2637 hrs, Open Station, H- pattern controls, Steel tracks over tires, Aux hydraulics on foot pedal, rear weights, no bucket, recent service, 69HP Diesel, 8250 lb operation weight, SN: KV0250A160454

180
1993 Chevy C60 School Bus
180,535 miles, 66 passenger, Automatic Transmission, 366 CI gas engine, steer tires are like new, Runs and Drives, brakes DO NOT work. SN: 1GBL7T1P6PJ109030

181
2010 Freightliner Sprinter 3500
Mercedes Diesel, 265,034 miles, Automatic transmission, Box measures 14ft long, 8ft wide, 1 ton chassis, has Thieman Electric Lift Gate that works good, Check engine light is on, Like new front tires. Runs and drives good. SN: WDPPF4CC5A9440215

182
2011 Isuzu NPR Box Truck
2011 Isuzu MPR Box Truck, Diesel engine, Automatic transmission, Cold A/C, Power windows, 16ft Box, Side door, Lift gate, Neptune bulk oil pump with 50ft hose, Runs and drives good, ABS light is on, 259,645 miles. SN: JALE5W164B7301554

183
2015 JLG 1932RS Slab Lift
2015 JLG 1932RS Slab Lift, Trogan Batteries, 260 hrs, 19ft Lift, 32" wide extendable platform, Runs and operates well. SN: 0200240760

184
Komatsu FG455T-7 Cushion Tire Forklift
Komatsu FG455T-7 Cushion Tire Forklift, 13,616 hrs, Open cab, LP Gas, Tank not included, 9,200lb lift capacity, 130" Lift height, 40" Forks, Side shift, 13,616 hrs, Lights work, New tires, Runs good, Side shift cylinder does leak. SN: 102173A

185
2006 Yale CP080L Pneumatic Tire Forklift
Yale CP080L Pneumatic Tire Forklift, Enclosed cab, 41.5 hrs, Gas engine, 122" Lift, 6,200lb capacity, 60" Forks, Hydraulic fork positioners, 19" to 78" wide,cab with heat, Front and rear wipers, Brand new tires, Runs and operates good. SN: E813V05338...

186
2008 Yale GLC080VX Cushion Tire Forklift
Yale GLC080VX Cushion Tire Forklift, LP Gas, Tank not included, 8300lb Lift capacity, 120" Lift height, 48" Forks, Side shift, Side curtain lights, LED Lights, Good tires. SN: E818V02589F

187
2006 Genie GS1930 Scissor Lift
2006 Genie GS1930 Scissor Lift, 472 hrs, 19ft Lift, 30" Extendable platform, on board charger, 110v outlet, Runs and operates good. SN: 076727

188
2018 Wacker Neuson EZ53 Mini Excavator
2018 Wacker Neuson EZ53 Mini Excavator, 1542 hrs, Hydraulic thumb, Like new tracks, Closed cab, VDS (cab tilts hydraulic for digging of grade), Manual coupler, 24" Tooth buckert, Perkins diesel, Fresh service, Cold A/C, Two speed, Runs and operates g...

194
2014 Polaris Ranger Diesel UTV
Diesel, 4x4, Differential lock, Hydrostatic transmission, Roof, Back glass, Tip-out front glass, 739 hrs, 4,139 miles, Runs and drives good, 12v outlet, Indiana title. SN: 4XA1D9JD2E7570196

189
Yale GLC030VX Cushion Tire Fork Lift
LP Gas, Finger tip controls, Sideshift, 187" Lift height, 2,800lb Max lift, 16,025 hrs, Open cab, Runs and operates good, New battery, New rear tires, LP tank not included. SN: C809V04958H

190
Danuser 19-16 Blade
6ft Rear blade, CAT 1 hitch, Reversable. SN: 8801

191
Club Car DS Golf Cart
48V Electric Cart, 8 Brand new batteries, Comes with charger, Aluminum dump bed, Top, Headlights, Fold down windshield, Runs and operates great. SN: AQ0328-299365

192
EZ-GO TXT Gas Freedom Golf Cart
EZ Go TXT Freedom Golf Cart, Gas, Has top, Windshield, Flat deck on back, Does not have a key, Has on/off switch, Runs and drives good, Headlights and tail lights, New seat cover. SN: 3215056

193
EZ-Go TXT Gas Golf Cart
EZ-Go TXT Gas Golf Cart, Has top windshield, Rear seat, Headlights, Kawasaki engine, Open cab, New battery, Runs and operates good.

195
2000 JLG 450AJ Z Boom Lift
2000 JLG 450AJ Z Boom Lift, GM Engine, Dual fuel, 45ft Max reach, 550 lb capacity, 38-15.5-16.5 Tires, 14,320 lbs, 4433 hrs.

196
2012 Yale GLC50VX Cushion Tire Forklift
2012 Yale GLC50VX Cushion Tire Forklift, LP Gas, 3 Stage with 189" Lift height, 4800 lb Max lift, Finger tip controls, 42" Forks, Side shift, LP tank not included, 34,971 hrs,Fork carrier is bent slightly - see photos. SN: A910V0668D

197
Custom made tilt trailer
Custom made trailer, 13ft long, 66" wide, Tilt deck trailer, 2-7,000lb axles, is missing front wheel and hub assemblies. No title.

198
McKiernan-Terry Hammer Attachment NO7
Pneumatic hammer, 2 sections with it weighs 5,200lbs, SN: 126885

199
McKiernan-Terry 9-B3 Pile Driving Hammer
Diesel hammer, 20 x 20 Hammer base, weighs 71lbs, Max 145 strokes per minute, 8750ft lb blow.

200

201
Scaffolding Walk Boards Titan
qty 6 Max load 500lb 24' x 24" x 5 1/4 walk boards

202
Scaffolding Walk Boards
qty 2 Titan 500lb Max load, 24' x 24" x 5 1/4 qty 3 Green Bull 25' x 24" x 6 1/2 750lb max load qty 1 Unknown brand 25' x 24" x 6 1/2 500lb max load

203
Scaffolding Walk Boards Werner Model 2620
qty 7 20' x 24" x 6", Task master aluminum stag, 500lb max load

204
Scaffolding Walk Boards
qty 1 Titan 20' x 24" x 5 1/4 500lb max load qty 1 S&K 20' x 20" x 6" 500lb max load qty 3 2620 20' x 24" x 6" 500lb max load qty 1 Greenbull 20' x 24" x 5" 500lb max load qty 1 Louisville 20' x 24" 6" 500lb max load

205
Scaffolding Walk Boards
qty 3 Tital 20' x 24" x 5 1/4, 500lb Walk boards qty 2 Greenbull 20' x 24" x 5 1/4" 500lb max load qty 3 Werner 2520 20' x 24" 5 1/4" 500lb max load qty 1 Werner 2520 Has walk railing 500lb max load

206
Scaffolding Walk Boards
qty 1 22' x 20" x 5 1/4" 500lb max load qty 1 16' x 20" x 5 1/4" 500lb max load qty 1 Werner cut 14' x 24" x 5" 500lb max load qty 1 cut 18' x 20" x 6" 500lb max load qty 1 cut 14' x 20" x 4" 500lb max load qty 1 Werner cut 16' x 24" x 6" 500lb max l...

207
Scaffolding Walk Boards
qty 1 Louisville 30' x 24" x 6" not cut, 500lb max load qty 2 Green Bull 26' x 24" x 6" not cut, 500lb max load qty 1 Werner 29' x 24" x 6" cut off, 500lb max load qty 1 Werner 30' x 24" x 6" cut off, 500lb max load qty 1 Werner 2632 27' x 24" x 6" c...

208
Scaffolding Walk Boards
qty 1 Werner 2024 24' x 12" x 5" 250lbs load capacity qty 1 Werner Taskmaster 2320 20" x 12" x 6' 500lb qty 1 Louisville 18' x 12" x 5 1/4" 250lb load capacity qty 1 Unknown 16' x 18" x 5/14" 250lb load capacity qty 1 Unknown 24' x 12" x 6" cut off...

209
Decking Walk Boards
qty 14 7' x 19" x 3 1/2" Aluminum scaffold platform with plywood deck.

210
Decking Walk Boards
7' x 19" x 3 1/2" Aluminum scaffold platform with plywood deck, Steel head decking, 750lb load psf.

211
11ft Rung Aluminum Ladder
15' total length 2" Square tubing 1" Round rungs

212

213

214
40 - High Bay Dome Lights
Cooper, Lithonia, Hiteck Brands, 120/208/240/277 Voltage capabilities.

215
Reznor Hanging Heater
115v, 95,900 BTU, 3" Exhaust, Natural or LP Gas. SN: 36279

216
Reznor Hanging Heater
Model LUS-125-F, 115v, 125,000 BTU, Natural or LP Gas. SN: GE182659

217
Reznor Hanging Heater
mODEL lus-125f, 115, 125,000 BTU. SN: GE18L660

218
Briggs and Stratton 3" Pump
8 hp Gas engine, 3" Pump, Does not run.

219
Stainless Steel Tank
48" Tall x 34" Across, Has ball valve drain kit.

220
Stainless Steel Tank
40"Tall x 32" Across, Has drain valve.

221
Stainless Steel Tank
51" Tall x 36" Across, Has 2" drain valve, Steel frame.

224
Yale Industrial Battery Charger
48v, 240v, 3 Phase charger for forklift, Working unit.

225
3 11R24.5 Tires on Alcoa aluminum wheels, 10 lug
3 11R24.5 Tires on Alcoa aluminum wheels, 10 lug. Tires are located off site.

226
2 445-50-22.5 Tires and wheels
2 445-50-22.5 Tires and wheels, Alcoa super single wheels, 10 lug wheels. Tires are located off site.

227
4 445/55/22.5 Tires
4 445/55/22.5 Tires on Aluminum Alcoa wheels. Tires are located off site.

228
4 275/80/22.5 Tires
4 275/80/22.5 Tires, no wheels. Tires are located off site.

229
4 445/35/22.5 Tires
4 445/35/22.5 Tires, comes with wheels. Tires are located off site.

230
Craftsman 2 Head Work Light
2 Bulbs, 115V, Stand and case.

231
Box of clamps
Contents of box. All one money.

232
Crate of Hand Trowels
Contents of crate. All one money.

233
John Deere Glass Door
Glass door for John Deere Skid Steer, unsure of model fitment. Buyer responsible for fitment.

234
Antique Bell
Bell and stand. Bell does have ringer.

235
WEN 8" Electric Pole Saw
Brand new 115V, Pole Saw