proxi RT Lumber
Previous Page Listing ID#: 1464910

Auction Location
NA, IN na
Full Address Available on Wednesday, Dec 7
Auction Dates and TimesSALE IS COMPLETED
Thursday Dec 8, 2022 Completed
Auction Type
 Live Auction 
Company Information
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

GoToAuction.com ID#: 5286
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Information

00
Information Lot

All items must be removed by December 31st due to real estate being sold. Seller is available to do rigging and loading at buyers expense. 

100
Woodmizer 4000 Thin Kerf Head Rig
SN-WM4000D1206140464A402, 460V, 2' x 90" off bear belt, 30 hp electric motor on head - everything else is fully hydraulic, Meter reads 13,101 hours, 1 x 24" band wheels, 1 1/2" x 16'3" bands, (2)28" chain type log turners, Panograph, 8' x 27' overall, 5' x 5' x 9'6" tall cab w/ controls, AC, and steps, Includes electrical boxes and 4 extra wear plates

101
Baker 3-Strand Log Deck w/ Stop'N'Load
90" x 16', Hydraulic drive and cylinder on loading arm, Model-BLC-0, SN-20-1702, Was brand new in 11/20 and has only been in production for about 8 months

102
15 HP Hydraulic Pack
2' x 3' x 20" tank, Includes electrical box, pumps, valves, and all hoses to equipment

103
Skate Rolls
4' x 8'8", 2 1/2" x 44" rolls, 4" spacing

104
Baker 2-Blade Edger
Model-BE-0, SN-20-526, 13 x 24 x 7" hydraulic tank, 32" x 80" outfeed belt, 32" x 8' infeed rolls, 2' x 2' power feed belt, 4 x 28" capacity, 20 hp electric drive on head, Hydraulic controls, blade movement, and feeds, 12" split blades - 1 moveable, Was brand new in 11/2020 and has only been in production for about 8 months

105
Baker Air Powered Landing Table
52" x 14', Air cylinders for "flip" , Was brand new in 11/20 and has only been in production for about 8 months

106
Baker Belt Conveyor
24" belt, 7" sides, 28" x 28', Hydraulic drive, Model-BLC-0, SN-20-1703, Was brand new in 11/20 and has only been in production for about 8 months

107
Baker 4-Sided Planer/Moulder
Model M-142, SN-07-036, 2 1/2 x 13" capacity, 3 cutting heads, 32" x 12' overall, Electric drive, Was brand new in 11/20 and has only been in production for about 8 months

108
Phelps 36" Blower
19" inlet, 14 x 14" outlet, Includes frame and all flex hose to and from blower, 30 hp electric motor

109
Schulz Air Compressor
15 hp electric motor, 120 gallon horizontal tank, SN-3124103

110
24" Blower Fan
Electric drive, Includes frame, 18 x 24" outlet

111
Electrical Boxes
5 electrical boxes and conduit/wire to equipment

112
Skate Rolls
18" x 10', 2 1/2" x 14 1/2" rolls, 9" spacing, Brand new

113
Skate Rolls
18" x 10', 2 1/2" x 14 1/2" rolls, 9" spacing, Brand new

114
Skate Rolls
18" x 10', 2 1/2" x 14 1/2" rolls, 9" spacing, Brand new

115
Lumber Cart
46" x 6' x 32" tall

116
Lumber Cart
4' x 5' x 42" tall

117
Banding Cart and Tools
Partial roll of 5/8" steel banding, Crimper and strapping tools

118
Bands
(122)1 1/2" x 16'3", (4) 2" x 16'3", All 1 1/2" bands are freshly sharpened and ready to use

119
5x5 Sassafras Posts
8'6"-9' long, 9 posts total, Includes approximately 190 board feet of mixed hardwood, Air dried

120
Skate Rolls w/ Lumber Racks
18" x 10', 2 1/2" x 14 1/2" rolls, 9" spacing, 4' x 5' lumber rack on each side

121
Skate Rolls w/ Lumber Racks
18" x 10', 2 1/2" x 14 1/2" rolls, 9" spacing, 4' x 5' lumber rack on each side

121A
1" Pine Lumber
3-11" wide, 16'6"-17'6" long, Air dried, Approximately 1,385 board feet

122
Skate Rolls
16" x 10', 2 1/2'' x 12'' rolls, 6" spacing

123
Slab Rack
40" x 8' x 32'' tall, Closed on one end

124
Skate Rolls w/ Lumber Racks
18" x 7', 2 x 14" rolls, Varied spacing, 4 x 5' rack on 1 side, 4' x 6' rack on other side

125
Folding Log Bunks
12 total, 92"-8' long, 36-44" tall arms

125A
Skate Rolls w/ Lumber Racks
11" x 10', 2 x 7 1/2" rolls, 4 1/2" spacing, 45" x 6' rack w/ fork pockets

126
Belt Conveyor
No belt or drive, 13" pan, 6" sides, 21" x 52' total(in 3 sections)

127
Rollcase
6 1/2" x 15" rolls, 12" spacing, 2' x 20', No drive

135
Smicksburg Band Mill
1 1/2" x 30" band wheels, No bands included, 26 x 64" off bear, Line shaft ready, 4' x 14'6" 4 HB Handset carriage, 4 axles, track is 30" center to center, 40' of track - in 3 sections

136
150 KW 5.9 Cummins Power Unit
Generator SN-1M-333896-0599, 1800 rpm, 9763 hours, Needs new injector pump

137
2 Strand Log Deck w/ Stop'N'Load
80" x 25', Single phase electric drive

138
Belt Conveyor
32" belt, 38" x 30', Electric drive

139
Carlisle and Hammond Machinist Lathe
16 x 64" bed, 16" 4 jaw chuck, Electric drive, Includes box of tools and parts

140
5.9 Cummins Engine
Approximately 4,000 hours

141
Peterbilt 48" Sleeper
Very clean interior

142
Meadows 48" Circle Mill
4' x 14' 2 headblock handset carriage, 30" center to center of track, 40' of track, Wooden frame, 48" circle saw-needs sharpened, 20" x 6' off bear, Line shaft ready

143
4 Cylinder Detroit Diesel Power Unit
PTO clutch, Starts and runs good, Needs Exhaust manifold work

144
84 Gallon Fuel Tank

145
22" Blower
Line shaft ready, 13" inlet, 8" outlet

146
PVC Pipe
45' of 6", 8' of 8"

147
Skate Rolls
20" x 10', 2 1/4" x 16 1/2" rolls, 8" spacing

148
Leeson Electric Motor
125 hp, 444TS frame, 1680 rpm

149
Electric Motor
50 hp, 436U frame, 1775 rpm, Includes electrical box

150
22" Blower
13" inlet, 8" outlet, Line shaft ready

200
CAT Forklift
Model-TC100D, SN-5LB01002, 10,000 lb capacity, Has sideshift, Pneumatic tires, 5 x 54" forks, 42" x 7' tall mast, Diesel engine, Needs new ignition switch

201
Case W14 Wheel Loader
SN-9158490X, Will be in good running condition by auction date, No 3rd valve, Includes 64" wide Pin through style forks, 6 x 52" forks

201A
Wheel Loader Bucket
Pin-through style, 94" wide, 48" deep

201B
Quick Attach Wheel Loader Bucket
6' x 9' x 5' tall, Needs quick attach repaired/replaced

202
CAT D6C Crawler Dozer
SN-74A2159C, 5 speed manual transmission, 20" tracks w/ approximately 50" tread remaining, Starts and runs good, 9'9" 4-way blade, 6 cylinder CAT diesel engine, Has hydraulic leak on cylinder

203
John Deere 548E Grapple Skidder
PIN-DW548ES542382, 86" 2-way blade, Meter reads 15,846 hours, John Deere Winch w/ like new 1/2" cable, 7' max width grapple, Approximately 1200 hours on rebuilt engine

203A
John Deere 843J Feller Buncher
PIN-WC843JX770049, John Deere 6068 Diesel engine, John Deere Cutting Head(SN-WCFD22B012030, 4' width capacity, 10' tall), Meter reads 11,228 hours, Fully enclosed cab w/ Heat/AC and radio

204
Barko 160B TRK Knuckleboom
SN-20870, Meter reads 9935 hours, Pilot joystick controls, 4' max continuous grapple, 6 cylinder diesel engine, Mounted on Pitts trailer(VIN-1PEKB4520T1960862)

204A
CTR De-Limber
Model-CTR-314-TSC, SN-61955-TSC, 36" bar, 16" width capacity, Mounted on lot #204

204B
Hudson Buck Saw
64" bar, Direct drive, 5x13' log bunk

204C
Prentice 2384 Knuckleboom
20,943 hours, Pilot joystick controls, Cummins diesel engine, Mounted on Kodiak Trailer, Continuous grapple

204E
Serco 8500 Log Loader
Includes hydraulic tank, Grapple, Boom, Control tower, Hydraulic lines, In good condition, Ready to put together and install

204D
De-Limber
Direct drive, 36" width capacity, 48" bar

205
1994 Kenworth W900 Truck, VIN # 1XKWDB9X1RJ627943 w/ Serco 8000 Log Loader
Year: 1994
Make: Kenworth
Model: W900
Vehicle Type: Truck
Mileage:  Meter reads 200,292 miles
Drive Line: 6x4
Engine Type: CAT diesel engine(SN-6TS01529, New ECM installed 9/22)
Fuel Type: Diesel
Transmission: 18 speed Eaton Fuller
VIN #: 1XKWDB9X1RJ627943

Features and Notes: GVWR-50,000 lb, Very good tires, 92" wide x 84" tall log bunks, 24' long log bed w/ pintle hitch, 5' max width grapple, Fully hydraulic log loader, Starts right up and runs great, Very nice truck.

206
1996 Kenworth T600 Truck, VIN # 1XKADB9X6TR718791
Year: 1996
Make: Kenworth
Model: T600
Vehicle Type: Truck
Mileage: Meter reads 773,051 miles
Drive Line: 6x4
Engine Type: L6, 14.6L (893 CID)
Fuel Type: Diesel
Transmission: 13 speed Eaton Fuller
VIN #: 1XKADB9X6TR718791

Features and Notes: Cat C Model diesel engine, Full sleeper cab, Cab has Heat/AC, sunroof, and radio

207
1979 International 1824 Truck
VIN-AA182JHB14528, GVWR-23,600 lb, 5 speed manual transmission, Condition unknown

208
Ford F600 Dump Truck
SN-F60DCT61283, GVWR-19,200 lb, 4 speed manual transmission, Meter reads 98,485 miles, 90"x16' dump bed w/ 5' tall sides

209
1975 International 1600 Dump Truck
VIN-D0512EHA44503, 5 speed manual transmission, Meter reads 44,864 miles, 90"x16' dump bed w/ 52" sides

210
1993 Lo-Boy Trailer
Partial SN-TA173252, 8' x 9' upper deck, 9' x 19'6" main deck, 5' ramps, 46' long overall, Clean title

211
Log Trailer
7' wide x 92" tall log bunks, 42' long

212
Flatbed Trailer
8' x 48', Good tires, Includes straps, Clean title

214
Log "Pole" Trailer
86" wide x 92" tall bunks, Approximately 35' long

215
Log "Pole" Trailer
90" wide x 105 tall log bunks, 35' long, Hydraulic brakes

216
Equipment Tag Trailer
SN-DRXMVB000100770M0, Pintle hitch, Triple tandem axles, 8'x19' main deck, 3' dovetail, 22"x5' ramps, 28' long overall

217
Step Deck Flatbed Trailer
8' x 9' upper deck, 8' x 28' main deck, 6' dovetail, 22" x 5' ramps, 43' long, Like new tires

218
Power Washer mounted on Trailer
160 hours, 18 hp Vanguard gas motor, Diesel powered water heater, 7' x 14'6" trailer, New water pump, 500 gal. water tank, 65 gal. soap tank, 2 rolls of 5/8" pressure hose, 1 roll of 1'' garden hose, 2 wands, No title

219
Dump Trailer
8' x 11' x 54" tall box, 28' long overall, Pintle hitch, Dual tandem axles, In good condition

275
Rough Cut Cherry Lumber
2'' thick, 5-6" wide, 9-11' long, Approximately 1300 board feet, Air dried

276
Rough Cut 6x6 Pine Posts
9' long, 42 total

277
Rough Cut 6x6 Pine Posts
8 @ 8'6", 27@11', Air dried

278
6x6 Cedar Posts
10'8"-12'8" long, 12 total

279
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 684 board feet, Air dried

280
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 360 board feet, Air dried

281
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 363 board feet, Air dried

282
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 720 board feet, Air dried

283
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 690 board feet, Air dried

284
Rough Cut Hickory Lumber
1" thick, 5-10" wide, 9-11' long, Approximately 550 board feet, Air dried

285
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 550 board feet, Air dried

286
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 10' long, Approximately 785 board feet, Air dried

287
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 725 board feet, Air dried

288
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 495 board feet, Air dried

288A
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 725 board feet, Air dried

289
Rough Cut Cherry Lumber
1" thick, 5-12" wide, 9'-10'8'' long, Approximately 495 board feet, Air dried

290
Rough Cut Hickory Lumber
1" thick, 4-12" wide, 9-11' long, Approximately 1080 board feet, Air dried

291
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 575 board feet, Air dried

292
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 540 board feet, Air dried

293
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 610 board feet, Air dried

294
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 250 board feet, Air dried

295
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9-10' long, Approximately 800 board feet, Air dried

296
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9-11' long, Approximately 1015 board feet, Air dried

297
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 720 board feet, Air dried

298
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 575 board feet, Air dried

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend







Sponsored Links

proxi RT Lumber

Bright Star Realty and Auctions, INC

Bright Star Realty and Auctions, INC


Contact: Loren Beachy
Phone: 574-825-0704
Sale Location
NA, IN na
Full Address Available after 9 am
on Wednesday, Dec 7
Sale Dates and Times
Thursday Dec 8, 2022 Completed
Sale Terms and Conditions

Listing Details

00
Information Lot

All items must be removed by December 31st due to real estate being sold. Seller is available to do rigging and loading at buyers expense. 

100
Woodmizer 4000 Thin Kerf Head Rig
SN-WM4000D1206140464A402, 460V, 2' x 90" off bear belt, 30 hp electric motor on head - everything else is fully hydraulic, Meter reads 13,101 hours, 1 x 24" band wheels, 1 1/2" x 16'3" bands, (2)28" chain type log turners, Panograph, 8' x 27' overall, 5' x 5' x 9'6" tall cab w/ controls, AC, and steps, Includes electrical boxes and 4 extra wear plates

101
Baker 3-Strand Log Deck w/ Stop'N'Load
90" x 16', Hydraulic drive and cylinder on loading arm, Model-BLC-0, SN-20-1702, Was brand new in 11/20 and has only been in production for about 8 months

102
15 HP Hydraulic Pack
2' x 3' x 20" tank, Includes electrical box, pumps, valves, and all hoses to equipment

103
Skate Rolls
4' x 8'8", 2 1/2" x 44" rolls, 4" spacing

104
Baker 2-Blade Edger
Model-BE-0, SN-20-526, 13 x 24 x 7" hydraulic tank, 32" x 80" outfeed belt, 32" x 8' infeed rolls, 2' x 2' power feed belt, 4 x 28" capacity, 20 hp electric drive on head, Hydraulic controls, blade movement, and feeds, 12" split blades - 1 moveable, Was brand new in 11/2020 and has only been in production for about 8 months

105
Baker Air Powered Landing Table
52" x 14', Air cylinders for "flip" , Was brand new in 11/20 and has only been in production for about 8 months

106
Baker Belt Conveyor
24" belt, 7" sides, 28" x 28', Hydraulic drive, Model-BLC-0, SN-20-1703, Was brand new in 11/20 and has only been in production for about 8 months

107
Baker 4-Sided Planer/Moulder
Model M-142, SN-07-036, 2 1/2 x 13" capacity, 3 cutting heads, 32" x 12' overall, Electric drive, Was brand new in 11/20 and has only been in production for about 8 months

108
Phelps 36" Blower
19" inlet, 14 x 14" outlet, Includes frame and all flex hose to and from blower, 30 hp electric motor

109
Schulz Air Compressor
15 hp electric motor, 120 gallon horizontal tank, SN-3124103

110
24" Blower Fan
Electric drive, Includes frame, 18 x 24" outlet

111
Electrical Boxes
5 electrical boxes and conduit/wire to equipment

112
Skate Rolls
18" x 10', 2 1/2" x 14 1/2" rolls, 9" spacing, Brand new

113
Skate Rolls
18" x 10', 2 1/2" x 14 1/2" rolls, 9" spacing, Brand new

114
Skate Rolls
18" x 10', 2 1/2" x 14 1/2" rolls, 9" spacing, Brand new

115
Lumber Cart
46" x 6' x 32" tall

116
Lumber Cart
4' x 5' x 42" tall

117
Banding Cart and Tools
Partial roll of 5/8" steel banding, Crimper and strapping tools

118
Bands
(122)1 1/2" x 16'3", (4) 2" x 16'3", All 1 1/2" bands are freshly sharpened and ready to use

119
5x5 Sassafras Posts
8'6"-9' long, 9 posts total, Includes approximately 190 board feet of mixed hardwood, Air dried

120
Skate Rolls w/ Lumber Racks
18" x 10', 2 1/2" x 14 1/2" rolls, 9" spacing, 4' x 5' lumber rack on each side

121
Skate Rolls w/ Lumber Racks
18" x 10', 2 1/2" x 14 1/2" rolls, 9" spacing, 4' x 5' lumber rack on each side

121A
1" Pine Lumber
3-11" wide, 16'6"-17'6" long, Air dried, Approximately 1,385 board feet

122
Skate Rolls
16" x 10', 2 1/2'' x 12'' rolls, 6" spacing

123
Slab Rack
40" x 8' x 32'' tall, Closed on one end

124
Skate Rolls w/ Lumber Racks
18" x 7', 2 x 14" rolls, Varied spacing, 4 x 5' rack on 1 side, 4' x 6' rack on other side

125
Folding Log Bunks
12 total, 92"-8' long, 36-44" tall arms

125A
Skate Rolls w/ Lumber Racks
11" x 10', 2 x 7 1/2" rolls, 4 1/2" spacing, 45" x 6' rack w/ fork pockets

126
Belt Conveyor
No belt or drive, 13" pan, 6" sides, 21" x 52' total(in 3 sections)

127
Rollcase
6 1/2" x 15" rolls, 12" spacing, 2' x 20', No drive

135
Smicksburg Band Mill
1 1/2" x 30" band wheels, No bands included, 26 x 64" off bear, Line shaft ready, 4' x 14'6" 4 HB Handset carriage, 4 axles, track is 30" center to center, 40' of track - in 3 sections

136
150 KW 5.9 Cummins Power Unit
Generator SN-1M-333896-0599, 1800 rpm, 9763 hours, Needs new injector pump

137
2 Strand Log Deck w/ Stop'N'Load
80" x 25', Single phase electric drive

138
Belt Conveyor
32" belt, 38" x 30', Electric drive

139
Carlisle and Hammond Machinist Lathe
16 x 64" bed, 16" 4 jaw chuck, Electric drive, Includes box of tools and parts

140
5.9 Cummins Engine
Approximately 4,000 hours

141
Peterbilt 48" Sleeper
Very clean interior

142
Meadows 48" Circle Mill
4' x 14' 2 headblock handset carriage, 30" center to center of track, 40' of track, Wooden frame, 48" circle saw-needs sharpened, 20" x 6' off bear, Line shaft ready

143
4 Cylinder Detroit Diesel Power Unit
PTO clutch, Starts and runs good, Needs Exhaust manifold work

144
84 Gallon Fuel Tank

145
22" Blower
Line shaft ready, 13" inlet, 8" outlet

146
PVC Pipe
45' of 6", 8' of 8"

147
Skate Rolls
20" x 10', 2 1/4" x 16 1/2" rolls, 8" spacing

148
Leeson Electric Motor
125 hp, 444TS frame, 1680 rpm

149
Electric Motor
50 hp, 436U frame, 1775 rpm, Includes electrical box

150
22" Blower
13" inlet, 8" outlet, Line shaft ready

200
CAT Forklift
Model-TC100D, SN-5LB01002, 10,000 lb capacity, Has sideshift, Pneumatic tires, 5 x 54" forks, 42" x 7' tall mast, Diesel engine, Needs new ignition switch

201
Case W14 Wheel Loader
SN-9158490X, Will be in good running condition by auction date, No 3rd valve, Includes 64" wide Pin through style forks, 6 x 52" forks

201A
Wheel Loader Bucket
Pin-through style, 94" wide, 48" deep

201B
Quick Attach Wheel Loader Bucket
6' x 9' x 5' tall, Needs quick attach repaired/replaced

202
CAT D6C Crawler Dozer
SN-74A2159C, 5 speed manual transmission, 20" tracks w/ approximately 50" tread remaining, Starts and runs good, 9'9" 4-way blade, 6 cylinder CAT diesel engine, Has hydraulic leak on cylinder

203
John Deere 548E Grapple Skidder
PIN-DW548ES542382, 86" 2-way blade, Meter reads 15,846 hours, John Deere Winch w/ like new 1/2" cable, 7' max width grapple, Approximately 1200 hours on rebuilt engine

203A
John Deere 843J Feller Buncher
PIN-WC843JX770049, John Deere 6068 Diesel engine, John Deere Cutting Head(SN-WCFD22B012030, 4' width capacity, 10' tall), Meter reads 11,228 hours, Fully enclosed cab w/ Heat/AC and radio

204
Barko 160B TRK Knuckleboom
SN-20870, Meter reads 9935 hours, Pilot joystick controls, 4' max continuous grapple, 6 cylinder diesel engine, Mounted on Pitts trailer(VIN-1PEKB4520T1960862)

204A
CTR De-Limber
Model-CTR-314-TSC, SN-61955-TSC, 36" bar, 16" width capacity, Mounted on lot #204

204B
Hudson Buck Saw
64" bar, Direct drive, 5x13' log bunk

204C
Prentice 2384 Knuckleboom
20,943 hours, Pilot joystick controls, Cummins diesel engine, Mounted on Kodiak Trailer, Continuous grapple

204E
Serco 8500 Log Loader
Includes hydraulic tank, Grapple, Boom, Control tower, Hydraulic lines, In good condition, Ready to put together and install

204D
De-Limber
Direct drive, 36" width capacity, 48" bar

205
1994 Kenworth W900 Truck, VIN # 1XKWDB9X1RJ627943 w/ Serco 8000 Log Loader
Year: 1994
Make: Kenworth
Model: W900
Vehicle Type: Truck
Mileage:  Meter reads 200,292 miles
Drive Line: 6x4
Engine Type: CAT diesel engine(SN-6TS01529, New ECM installed 9/22)
Fuel Type: Diesel
Transmission: 18 speed Eaton Fuller
VIN #: 1XKWDB9X1RJ627943

Features and Notes: GVWR-50,000 lb, Very good tires, 92" wide x 84" tall log bunks, 24' long log bed w/ pintle hitch, 5' max width grapple, Fully hydraulic log loader, Starts right up and runs great, Very nice truck.

206
1996 Kenworth T600 Truck, VIN # 1XKADB9X6TR718791
Year: 1996
Make: Kenworth
Model: T600
Vehicle Type: Truck
Mileage: Meter reads 773,051 miles
Drive Line: 6x4
Engine Type: L6, 14.6L (893 CID)
Fuel Type: Diesel
Transmission: 13 speed Eaton Fuller
VIN #: 1XKADB9X6TR718791

Features and Notes: Cat C Model diesel engine, Full sleeper cab, Cab has Heat/AC, sunroof, and radio

207
1979 International 1824 Truck
VIN-AA182JHB14528, GVWR-23,600 lb, 5 speed manual transmission, Condition unknown

208
Ford F600 Dump Truck
SN-F60DCT61283, GVWR-19,200 lb, 4 speed manual transmission, Meter reads 98,485 miles, 90"x16' dump bed w/ 5' tall sides

209
1975 International 1600 Dump Truck
VIN-D0512EHA44503, 5 speed manual transmission, Meter reads 44,864 miles, 90"x16' dump bed w/ 52" sides

210
1993 Lo-Boy Trailer
Partial SN-TA173252, 8' x 9' upper deck, 9' x 19'6" main deck, 5' ramps, 46' long overall, Clean title

211
Log Trailer
7' wide x 92" tall log bunks, 42' long

212
Flatbed Trailer
8' x 48', Good tires, Includes straps, Clean title

214
Log "Pole" Trailer
86" wide x 92" tall bunks, Approximately 35' long

215
Log "Pole" Trailer
90" wide x 105 tall log bunks, 35' long, Hydraulic brakes

216
Equipment Tag Trailer
SN-DRXMVB000100770M0, Pintle hitch, Triple tandem axles, 8'x19' main deck, 3' dovetail, 22"x5' ramps, 28' long overall

217
Step Deck Flatbed Trailer
8' x 9' upper deck, 8' x 28' main deck, 6' dovetail, 22" x 5' ramps, 43' long, Like new tires

218
Power Washer mounted on Trailer
160 hours, 18 hp Vanguard gas motor, Diesel powered water heater, 7' x 14'6" trailer, New water pump, 500 gal. water tank, 65 gal. soap tank, 2 rolls of 5/8" pressure hose, 1 roll of 1'' garden hose, 2 wands, No title

219
Dump Trailer
8' x 11' x 54" tall box, 28' long overall, Pintle hitch, Dual tandem axles, In good condition

275
Rough Cut Cherry Lumber
2'' thick, 5-6" wide, 9-11' long, Approximately 1300 board feet, Air dried

276
Rough Cut 6x6 Pine Posts
9' long, 42 total

277
Rough Cut 6x6 Pine Posts
8 @ 8'6", 27@11', Air dried

278
6x6 Cedar Posts
10'8"-12'8" long, 12 total

279
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 684 board feet, Air dried

280
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 360 board feet, Air dried

281
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 363 board feet, Air dried

282
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 720 board feet, Air dried

283
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 690 board feet, Air dried

284
Rough Cut Hickory Lumber
1" thick, 5-10" wide, 9-11' long, Approximately 550 board feet, Air dried

285
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 550 board feet, Air dried

286
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 10' long, Approximately 785 board feet, Air dried

287
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 725 board feet, Air dried

288
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 495 board feet, Air dried

288A
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 725 board feet, Air dried

289
Rough Cut Cherry Lumber
1" thick, 5-12" wide, 9'-10'8'' long, Approximately 495 board feet, Air dried

290
Rough Cut Hickory Lumber
1" thick, 4-12" wide, 9-11' long, Approximately 1080 board feet, Air dried

291
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 575 board feet, Air dried

292
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 540 board feet, Air dried

293
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 610 board feet, Air dried

294
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 250 board feet, Air dried

295
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9-10' long, Approximately 800 board feet, Air dried

296
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9-11' long, Approximately 1015 board feet, Air dried

297
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 720 board feet, Air dried

298
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 575 board feet, Air dried

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
proxi RT Lumber
 Live Auction
 
Auction Date(s)
Thursday Dec 8, 2022 Completed
Auction Location
NA, IN na
Full Address Available on Wednesday, Dec 7
Company
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Website: brightstarauctions.com


00
Information Lot

All items must be removed by December 31st due to real estate being sold. Seller is available to do rigging and loading at buyers expense. 

100
Woodmizer 4000 Thin Kerf Head Rig
SN-WM4000D1206140464A402, 460V, 2' x 90" off bear belt, 30 hp electric motor on head - everything else is fully hydraulic, Meter reads 13,101 hours, 1 x 24" band wheels, 1 1/2" x 16'3" bands, (2)28" chain type log turners, Panograph, 8' x 27' overall, 5' x 5' x 9'6" tall cab w/ controls, AC, and steps, Includes electrical boxes and 4 extra wear plates

101
Baker 3-Strand Log Deck w/ Stop'N'Load
90" x 16', Hydraulic drive and cylinder on loading arm, Model-BLC-0, SN-20-1702, Was brand new in 11/20 and has only been in production for about 8 months

102
15 HP Hydraulic Pack
2' x 3' x 20" tank, Includes electrical box, pumps, valves, and all hoses to equipment

103
Skate Rolls
4' x 8'8", 2 1/2" x 44" rolls, 4" spacing

104
Baker 2-Blade Edger
Model-BE-0, SN-20-526, 13 x 24 x 7" hydraulic tank, 32" x 80" outfeed belt, 32" x 8' infeed rolls, 2' x 2' power feed belt, 4 x 28" capacity, 20 hp electric drive on head, Hydraulic controls, blade movement, and feeds, 12" split blades - 1 moveable, Was brand new in 11/2020 and has only been in production for about 8 months

105
Baker Air Powered Landing Table
52" x 14', Air cylinders for "flip" , Was brand new in 11/20 and has only been in production for about 8 months

106
Baker Belt Conveyor
24" belt, 7" sides, 28" x 28', Hydraulic drive, Model-BLC-0, SN-20-1703, Was brand new in 11/20 and has only been in production for about 8 months

107
Baker 4-Sided Planer/Moulder
Model M-142, SN-07-036, 2 1/2 x 13" capacity, 3 cutting heads, 32" x 12' overall, Electric drive, Was brand new in 11/20 and has only been in production for about 8 months

108
Phelps 36" Blower
19" inlet, 14 x 14" outlet, Includes frame and all flex hose to and from blower, 30 hp electric motor

109
Schulz Air Compressor
15 hp electric motor, 120 gallon horizontal tank, SN-3124103

110
24" Blower Fan
Electric drive, Includes frame, 18 x 24" outlet

111
Electrical Boxes
5 electrical boxes and conduit/wire to equipment

112
Skate Rolls
18" x 10', 2 1/2" x 14 1/2" rolls, 9" spacing, Brand new

113
Skate Rolls
18" x 10', 2 1/2" x 14 1/2" rolls, 9" spacing, Brand new

114
Skate Rolls
18" x 10', 2 1/2" x 14 1/2" rolls, 9" spacing, Brand new

115
Lumber Cart
46" x 6' x 32" tall

116
Lumber Cart
4' x 5' x 42" tall

117
Banding Cart and Tools
Partial roll of 5/8" steel banding, Crimper and strapping tools

118
Bands
(122)1 1/2" x 16'3", (4) 2" x 16'3", All 1 1/2" bands are freshly sharpened and ready to use

119
5x5 Sassafras Posts
8'6"-9' long, 9 posts total, Includes approximately 190 board feet of mixed hardwood, Air dried

120
Skate Rolls w/ Lumber Racks
18" x 10', 2 1/2" x 14 1/2" rolls, 9" spacing, 4' x 5' lumber rack on each side

121
Skate Rolls w/ Lumber Racks
18" x 10', 2 1/2" x 14 1/2" rolls, 9" spacing, 4' x 5' lumber rack on each side

121A
1" Pine Lumber
3-11" wide, 16'6"-17'6" long, Air dried, Approximately 1,385 board feet

122
Skate Rolls
16" x 10', 2 1/2'' x 12'' rolls, 6" spacing

123
Slab Rack
40" x 8' x 32'' tall, Closed on one end

124
Skate Rolls w/ Lumber Racks
18" x 7', 2 x 14" rolls, Varied spacing, 4 x 5' rack on 1 side, 4' x 6' rack on other side

125
Folding Log Bunks
12 total, 92"-8' long, 36-44" tall arms

125A
Skate Rolls w/ Lumber Racks
11" x 10', 2 x 7 1/2" rolls, 4 1/2" spacing, 45" x 6' rack w/ fork pockets

126
Belt Conveyor
No belt or drive, 13" pan, 6" sides, 21" x 52' total(in 3 sections)

127
Rollcase
6 1/2" x 15" rolls, 12" spacing, 2' x 20', No drive

135
Smicksburg Band Mill
1 1/2" x 30" band wheels, No bands included, 26 x 64" off bear, Line shaft ready, 4' x 14'6" 4 HB Handset carriage, 4 axles, track is 30" center to center, 40' of track - in 3 sections

136
150 KW 5.9 Cummins Power Unit
Generator SN-1M-333896-0599, 1800 rpm, 9763 hours, Needs new injector pump

137
2 Strand Log Deck w/ Stop'N'Load
80" x 25', Single phase electric drive

138
Belt Conveyor
32" belt, 38" x 30', Electric drive

139
Carlisle and Hammond Machinist Lathe
16 x 64" bed, 16" 4 jaw chuck, Electric drive, Includes box of tools and parts

140
5.9 Cummins Engine
Approximately 4,000 hours

141
Peterbilt 48" Sleeper
Very clean interior

142
Meadows 48" Circle Mill
4' x 14' 2 headblock handset carriage, 30" center to center of track, 40' of track, Wooden frame, 48" circle saw-needs sharpened, 20" x 6' off bear, Line shaft ready

143
4 Cylinder Detroit Diesel Power Unit
PTO clutch, Starts and runs good, Needs Exhaust manifold work

144
84 Gallon Fuel Tank

145
22" Blower
Line shaft ready, 13" inlet, 8" outlet

146
PVC Pipe
45' of 6", 8' of 8"

147
Skate Rolls
20" x 10', 2 1/4" x 16 1/2" rolls, 8" spacing

148
Leeson Electric Motor
125 hp, 444TS frame, 1680 rpm

149
Electric Motor
50 hp, 436U frame, 1775 rpm, Includes electrical box

150
22" Blower
13" inlet, 8" outlet, Line shaft ready

200
CAT Forklift
Model-TC100D, SN-5LB01002, 10,000 lb capacity, Has sideshift, Pneumatic tires, 5 x 54" forks, 42" x 7' tall mast, Diesel engine, Needs new ignition switch

201
Case W14 Wheel Loader
SN-9158490X, Will be in good running condition by auction date, No 3rd valve, Includes 64" wide Pin through style forks, 6 x 52" forks

201A
Wheel Loader Bucket
Pin-through style, 94" wide, 48" deep

201B
Quick Attach Wheel Loader Bucket
6' x 9' x 5' tall, Needs quick attach repaired/replaced

202
CAT D6C Crawler Dozer
SN-74A2159C, 5 speed manual transmission, 20" tracks w/ approximately 50" tread remaining, Starts and runs good, 9'9" 4-way blade, 6 cylinder CAT diesel engine, Has hydraulic leak on cylinder

203
John Deere 548E Grapple Skidder
PIN-DW548ES542382, 86" 2-way blade, Meter reads 15,846 hours, John Deere Winch w/ like new 1/2" cable, 7' max width grapple, Approximately 1200 hours on rebuilt engine

203A
John Deere 843J Feller Buncher
PIN-WC843JX770049, John Deere 6068 Diesel engine, John Deere Cutting Head(SN-WCFD22B012030, 4' width capacity, 10' tall), Meter reads 11,228 hours, Fully enclosed cab w/ Heat/AC and radio

204
Barko 160B TRK Knuckleboom
SN-20870, Meter reads 9935 hours, Pilot joystick controls, 4' max continuous grapple, 6 cylinder diesel engine, Mounted on Pitts trailer(VIN-1PEKB4520T1960862)

204A
CTR De-Limber
Model-CTR-314-TSC, SN-61955-TSC, 36" bar, 16" width capacity, Mounted on lot #204

204B
Hudson Buck Saw
64" bar, Direct drive, 5x13' log bunk

204C
Prentice 2384 Knuckleboom
20,943 hours, Pilot joystick controls, Cummins diesel engine, Mounted on Kodiak Trailer, Continuous grapple

204E
Serco 8500 Log Loader
Includes hydraulic tank, Grapple, Boom, Control tower, Hydraulic lines, In good condition, Ready to put together and install

204D
De-Limber
Direct drive, 36" width capacity, 48" bar

205
1994 Kenworth W900 Truck, VIN # 1XKWDB9X1RJ627943 w/ Serco 8000 Log Loader
Year: 1994
Make: Kenworth
Model: W900
Vehicle Type: Truck
Mileage:  Meter reads 200,292 miles
Drive Line: 6x4
Engine Type: CAT diesel engine(SN-6TS01529, New ECM installed 9/22)
Fuel Type: Diesel
Transmission: 18 speed Eaton Fuller
VIN #: 1XKWDB9X1RJ627943

Features and Notes: GVWR-50,000 lb, Very good tires, 92" wide x 84" tall log bunks, 24' long log bed w/ pintle hitch, 5' max width grapple, Fully hydraulic log loader, Starts right up and runs great, Very nice truck.

206
1996 Kenworth T600 Truck, VIN # 1XKADB9X6TR718791
Year: 1996
Make: Kenworth
Model: T600
Vehicle Type: Truck
Mileage: Meter reads 773,051 miles
Drive Line: 6x4
Engine Type: L6, 14.6L (893 CID)
Fuel Type: Diesel
Transmission: 13 speed Eaton Fuller
VIN #: 1XKADB9X6TR718791

Features and Notes: Cat C Model diesel engine, Full sleeper cab, Cab has Heat/AC, sunroof, and radio

207
1979 International 1824 Truck
VIN-AA182JHB14528, GVWR-23,600 lb, 5 speed manual transmission, Condition unknown

208
Ford F600 Dump Truck
SN-F60DCT61283, GVWR-19,200 lb, 4 speed manual transmission, Meter reads 98,485 miles, 90"x16' dump bed w/ 5' tall sides

209
1975 International 1600 Dump Truck
VIN-D0512EHA44503, 5 speed manual transmission, Meter reads 44,864 miles, 90"x16' dump bed w/ 52" sides

210
1993 Lo-Boy Trailer
Partial SN-TA173252, 8' x 9' upper deck, 9' x 19'6" main deck, 5' ramps, 46' long overall, Clean title

211
Log Trailer
7' wide x 92" tall log bunks, 42' long

212
Flatbed Trailer
8' x 48', Good tires, Includes straps, Clean title

214
Log "Pole" Trailer
86" wide x 92" tall bunks, Approximately 35' long

215
Log "Pole" Trailer
90" wide x 105 tall log bunks, 35' long, Hydraulic brakes

216
Equipment Tag Trailer
SN-DRXMVB000100770M0, Pintle hitch, Triple tandem axles, 8'x19' main deck, 3' dovetail, 22"x5' ramps, 28' long overall

217
Step Deck Flatbed Trailer
8' x 9' upper deck, 8' x 28' main deck, 6' dovetail, 22" x 5' ramps, 43' long, Like new tires

218
Power Washer mounted on Trailer
160 hours, 18 hp Vanguard gas motor, Diesel powered water heater, 7' x 14'6" trailer, New water pump, 500 gal. water tank, 65 gal. soap tank, 2 rolls of 5/8" pressure hose, 1 roll of 1'' garden hose, 2 wands, No title

219
Dump Trailer
8' x 11' x 54" tall box, 28' long overall, Pintle hitch, Dual tandem axles, In good condition

275
Rough Cut Cherry Lumber
2'' thick, 5-6" wide, 9-11' long, Approximately 1300 board feet, Air dried

276
Rough Cut 6x6 Pine Posts
9' long, 42 total

277
Rough Cut 6x6 Pine Posts
8 @ 8'6", 27@11', Air dried

278
6x6 Cedar Posts
10'8"-12'8" long, 12 total

279
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 684 board feet, Air dried

280
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 360 board feet, Air dried

281
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 363 board feet, Air dried

282
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 720 board feet, Air dried

283
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 690 board feet, Air dried

284
Rough Cut Hickory Lumber
1" thick, 5-10" wide, 9-11' long, Approximately 550 board feet, Air dried

285
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 550 board feet, Air dried

286
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 10' long, Approximately 785 board feet, Air dried

287
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 725 board feet, Air dried

288
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 495 board feet, Air dried

288A
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 725 board feet, Air dried

289
Rough Cut Cherry Lumber
1" thick, 5-12" wide, 9'-10'8'' long, Approximately 495 board feet, Air dried

290
Rough Cut Hickory Lumber
1" thick, 4-12" wide, 9-11' long, Approximately 1080 board feet, Air dried

291
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 575 board feet, Air dried

292
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 540 board feet, Air dried

293
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 610 board feet, Air dried

294
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 250 board feet, Air dried

295
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9-10' long, Approximately 800 board feet, Air dried

296
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9-11' long, Approximately 1015 board feet, Air dried

297
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 720 board feet, Air dried

298
Rough Cut Hickory Lumber
1" thick, 4-10" wide, 9' long, Approximately 575 board feet, Air dried