THIS IS A COMPLETED SALE
View current listings by this company

Ashley River Lumber Co., Inc.
Previous Page Listing ID#: 1301679

Auction Location
Ridgeville, SC 29472

Auction Dates and TimesSALE IS COMPLETED
Thursday Sep 16, 2021 Completed

Auction Type
Live Auction

Company Information
Bright Star Realty and Auctions, INC Contact: Loren Beachy Phone: 574-825-0704 Email: beachyauctions@gmail.com Website: brightstarauctions.com GoToAuction.com ID#: 5286 View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area! You may set up alerts by area (zip and radius), keywords, and by company. It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
There is a 13% buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. (additional 2% CC fee will be charged for CC payments). All items are pick-up only. Smalls must be removed within 2 days. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items. Bidder Terms and Conditions These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows: IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO . Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid. “Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION. “Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids. “Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property. “Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder. “Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms. “Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer. "Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property. "Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation. “Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation. “Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer. “High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property. “High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price. “High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property. "Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event. “Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer. “No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale. “Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions. “Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online. "Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered. “Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers. “Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer). “Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction. “Property” means the Real Property and the Personal Property. “Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction. “Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction. “Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE. “Reserve Price” means the minimum price that Seller is willing to accept for specific Property. “Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer. “Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid. “Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller). "Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid. “Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction. “Without Reserve” means Absolute. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration. Auction Conducted in the State of Indiana. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium. The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction. The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion. Nature of the Auction. X The Auction for the Personal Property is an Absolute Auction. The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online: Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification. Online Bids. Online bids may not be reduced or retracted. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

Listing Terms and Conditions

There is a 13% buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. (additional 2% CC fee will be charged for CC payments). All items are pick-up only. Smalls must be removed within 2 days. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.

Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:

IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .

Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.

“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.

“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

Auction Conducted in the State of Indiana.

1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.

Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.

Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.

Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.

No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.

Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:

1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.

1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.

1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.

1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.

1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.

1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.

1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.

1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.

1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,

(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.

1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.

1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.

1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.

1. Online Bids. Online bids may not be reduced or retracted.

Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.

Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.

Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.

Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.

Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.

All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.

Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.

Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.

Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or

representation by Auctioneer

Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.

Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.

Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.

Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.

All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.

Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.

Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.

Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.

Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.

Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.

No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.

Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.

Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.

Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled

to specific performance or other equitable relief.

Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.

Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.

Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.

Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.

Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.

Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.

Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

Listing Information
After almost 70 years in operation Ashley River Lumber Company is changing gears and selling At Absolute Auction on Thursday September 16, 2020: Complete logging operation to include but not limited to: TigerCat 718 Feller Buncher, TigerCAT 610E Grapple Skidder, TigerCat 240B knuckleboom Loader, (2) JD 548 trailers, service trucks, Sawmill and Shavings Operation to Include but not limited to: (2) Baker Sawmills with Brewco Grade Resaw, Planing and finishing equipment for rustic slab tables and mantles Hutto Wood Shavings Mill Complete, over 1000 slabs of live edge slabs, and much more 1 Information Lot After almost 70 years in operation Ashley River Lumber Company is changing gears and selling At Absolute Auction on Thursday September 16, 2020: Complete logging operation to include but not limited to: TigerCat 718 Feller Buncher, TigerCAT 610E Grapple Skidder, TigerCat 240B knuckleboom Loader, (2) JD 548 trailers, service trucks, Sawmill and Shavings Operation to Include but not limited to: (2) Baker Sawmills with Brewco Grade Resaw, Planing and finishing equipment for rustic slab tables and mantles Hutto Wood Shavings Mill Complete! and much more 2 Custom Wood Slab Processing From Wood to Finish -2019 Baker Model LQ72 Horizontal Band Mill Custom Design, 50 HP Head Saw, Break, Hydraulic Strain, Model BBS-O-"LQ-72", S/N 19-964, (4) Dogs, 30' Bed, Sawyer's Console Controls & Setworks, Includes 5 HP Hydraulic Power Pack, Motor Controls, 3-Phase, Dust Removal: 50" x 14" W Split Level Box Chain Conveyor W/ 81X Paddle Chain, Shaft Mount Gear Reduction Drive & 7.5 HP Motor, Incline Stacking Conveyor - Loyal 35' x 14" Wide Paddle Chain Stacking Conveyor W/ Gear Motor Drive, Bottom Ware Plate, 24" Sterling Dust/Shavings Collector Fan, Model IIMS W/ Approx. 10 HP Motor & Cyclone Collector -Oliver Strait-O-Plane Roughing Planer Model 170, S/N 96386, Super Nice & Good Working Condition, Newman Helical Planer Heads W/ New Carbide Tips, 50 HP Top, 25 Hp Bottom, One Complete Set of Used Carbide Tips, (3) 10' x 24" Adjustable Height Gravity Roll Cases -Tannewitz Band Saw Wide Cut for Thick and Wide Live Edge Slabs W/ Brake Newly Rewound Motor -Dewalt Radial Arm Saw 30", 5 HP, 220/440V 3 Ph -Wood Wiz Leveler by Baker Model CX6, S/N 1129, 5" Dia. Head W/ Table 6' x 17' x 8" Thick Capacity, Planer Head/Sanding Head & Edge Jointer Bit -Wood Clamps, Rolling Material Handling Table every style & size you can image, Rolling Material Handling Table for easy transfer of Slab Pieces -Ingersoll Rand Air Compressor Vertical Tank Mount Model # 2340, S/N NAR10184973 W/ Air Reserve Tank and Inline Air Dryer -Kundig Top Sander Wide Belt 48" W/ Various Grit of Sand Paper on Hand -Oliver Jointer Model 166 LD, 30" Wide, S/N 50084 -Misc. Chargeable Hand Tools Radial Chop Saw, accessories(Sprayers, needed for Completing) -Delta Table Saw -Vacutherm Vacupress Vacuum Dry Kiln W/ Small Diesel Fuel Boiler newly replaced membrane and hoses -8' x 8' x 40' Tall Reefer W/ Dehumidifier, Spray Foam Insulation, Lights, Exhaust Fans & updraft (Paint Booth) -8' x 9' x 48' Insulated Roofer Container(Utility), Very Controlled Environment for Epoxy Work -9' x 8' x 28' Kidron Storage Finished Good Climate Controlled See Links in Additional Description https://arlumber.com https://www.instagram.com/ashleyriverlumber/?hl=en 100 2019 Baker LQ72 Band Sawmill Model BBS-0"LQ-72", serial # 19-964, 72" x 30' logs, 36" bandwheels, 50 HP electric motor, late model with very little use, 1 1/2" x 334" bands 3 Slab Inventory that is Included See the photos and list added to this lot 100A New and Used Bands for Baker Approximately 30 new and 50 used, 1 1/2" x 334" bands 101 36" Double Surface Oliver Straitoplane Machine #107, serial #96386, spiral cutter heads, 50 HP on top cutter, 25 HP on bottom cutter, good condition, 6" capacity, has brand new teeth 101a carbide teeth for planer 3 full boxes approx 120 per box 1 big box of misc used teeth 101b Oliver strait-o-plane model 170 parts 102 Diehl Straight-line Ripsaw 10 HP electric motor, chain has wear 103 Porter Sliding Chopsaw Model 47-A-20, serial # 69-5186, 18" blade, 20' infeed/outfeed rolls, electric drive 103a air hose and reel Has quick disconnect 104 Single Head Brewco Resaw with Return* Model BEZCH, serial # BEZEO1367, 1" band, 20" bandwheels, 20 HP electric motor 104a new band blades for brewco ez cut 105 Gravity roll case* 24" x 10' x 33" high, adjustable legs 106 Gravity roll case 24" x 10' x 33" high, adjustable legs 107 Gravity feed roll 24" x 10' x 33" high, adjustable legs 108 Waste Chain Conveyor 14" x 60' with 7" sides, electric drive along side the baker saw 109 24" Sterling Dust Blower Electric drive Wsteel structure 110 60" Dust Cyclone . 111 Waste Chain Conveyor 19" x 34' with 7" sides, electric drive 112 Baker Wood Wizz Surfacer Model BWW"6X", serial # 17-021, 6' x 15' 6" capacity, up to 9" thick material, electric motor, in very good condition 113 Logosol 4-Sided Moulder #PH260, 10" x 16" capacity, includes blower and box of profiles 112A WoodWizz winch for loading and unloading large slabs Never used 114 Kundig Single Head Belt Sander* 43" belt, good condition 114A Gravity Rolls Steel plate 16" x 60" x 31" high, 2 pieces 115 12"-14" Delta Rockwell Tilting Arbor Saw . 116 24" Oliver Jointer Machine # 166-ED, serial # 50084, 10 HP electric motor 116A Oliver Jointer for Blades On Straightoplane 1/2 HP grinder for planer 116B * Oliver jointer sharpner Head mount 117 Gravity feed roll 24" x 10' x 33" high, adjustable legs 117a Stretcher roll for small bands Includes personnel fan. 118 Tannewitz 24" Bandsaw* Model GH, serial # 78134, 7 1/2 HP electric drive motor, 2 1/4" x 36" bandwheels 119 DeWalt Radial Arm Saw 14" blade, 5 HP electric drive, 3 phase 124A Steel Building beside Hoop Building 40' x 160' with 16' eves, roof only, no sides, rated to withstand winds up to 120 mph 120 Ingersoll Rand Air Compressor Model 2340, serial # NAR10184973, 5 HP electric motor, 60 gallon vertical tank 121 Vertical Air Tank 32" x 72" tank 122 Dongan Transformer . 123 Square D Transformer . 124 Hoop Building 45' x 50', 2 man doors, 1 18' door, has new tarp still in box 124B Steel Building behind Hoop Building 45' x 50' with 16' eves, roof only, no sides, rated to withstand winds up to 120 mph 124C Kiln Direct Lumber Kiln Inside measurements are 11'6" x 27' x 12' high, LP furnace, in like new condition 125 Spray Booth 48' van trailer converted to spray booth, has lights, A/C, etc. nice setup 126 Brewco B-1600 The Wolf Run Around Resaw System Serial # BBFO22, 16" capacity, complete run around system, 40 HP electric motor, run around is hydraulic drive, 18' x 40' overall dimensions, 2" x 244" bands 126a * brewco 1600 parts Set of crowned wheels. Feed chain and end feed sprocket. Hydraulic motors; serves guides. New 2" blades 127 40 HP Hydraulic Pack Was used for runaround 128 4 Strand Transfer Deck 12' x 16' x 36" high, hydraulic drive 129 Dead Rolls 3' x 14' x 90" high, 8" x 30" rolls, 36" roll spacing, 2 7/16" shaft 130 4 Strand Transfer Deck 9' x 12' x 40" high, hydraulic drive 131 10 HP Hydraulic Pack Was used for decks 132 4 Strand Transfer Deck 7' x 10' x 30" high, hydraulic drive, missing 1 chain 133 Brewco B-4840 Grade Edger Model BGBE, serial # BWD436, 16" blades, 8' infeed, 6' x 26' tailing belt, laser system, 5 HP hydraulic pack 134 Roll Case 40" x 50', 8 1/2" x 30" rolls, 42" roll spacing, 2 1/2" shaft, electric drive 135 Belt Conveyor 27" x 30' x 36" high, 20" belt (needs replaced), hydraulic drive 136 4 Strand Transfer Deck 12' 4" x 24' x 34" high, electric drive, H-130 rooftop chain 137 4 Strand Transfer Deck 12'4" x 12', electric drive 138 Newman K-2S Trim Saw 80" x 30', 24" blades, electric 139 Outfeed from Trim Saw 11' x 12', electric drive 140 Barnsweep under Brewco 48" x 25', electric drive 141 Waste Conveyor 25" x 75' with 12" sides, electric drive 142 Waste Conveyor on Incline 25" x 36' with 12" sides, electric drive 147 Steel Building 50' x 140', 18' sidewalls, roof only, open sides, rated to withstand winds up to 120 mph 143 Waste Conveyor 32" x 150' with 12" sides, electric drive 148 Steel Building 25' x 44', 16' sidewalls, 36" man door, has divider wall, roof is insulated but not sides, 1-18' roll up door, 1-12' roll up door, rated to withstand winds up to 120 mph 144 Waste Belt 30" x 40', 16" belt, 12" sides, electric drive 145 Quincy Compressor Model QTH-120AMPRO, 10 HP electric motor, 120 gallon horizontal tank 145A Electrical Boxes and Transformer In building with Brewco 146 Steel Structure and Catwalk in Building with Brewco Includes frame that scragg mill used to sit on. 149 Vacutherm Model 500, serial # 06-502-8, 4' x 18' pan, diesel boiler, good condition 150 Go Fast Manual Chop Saw 80" infeed, 60" outfeed, 28" blade, electric motor 151 Holtec Pack Saw 60" cutting capacity, 25' infeed with lift arms, 21' outfeed, 15 HP electric motor, includes hydraulic pack 152 Waste Conveyor under Pack Saw 30" x 18' with additional 18' on incline, 30" belt, 12" sides, electric drive 153 Precision Chipper Chipper size 66-18, serial # 6-2588, no drive, rough condition 153a * 2 pallets of parts for precision chipper Fits lot 153. Knives. Babbitt pot ladles counter knives fans ect. 154 Lincoln Electric Motor 400 HP, 1780 RPM, frame 449T 154A Electrical under Chipper Soft start, main cutoff. 155 Precision Vibrating Conveyor 37" x 20', 24" pan, electric drive, infeed for chipper, does not include fiberglass section 156 Fiberglass Section and MDI XR-300 Metal Detector 24" pan x 60", has a few cracks 157 Chain Conveyor under Chipper 22" x 36' with 14" chain, electric drive 158 Precision Chip Screen Serial # S-1927, 10' x 10', electric drive 159 Chain Conveyor 18" x 26', paddle chain, electric drive 160 Chain Conveyor 10" x 38', paddle chain, no drive 161 Phelps 2 Van Chip Blower 20 HP electric motor 162 Baker Super Streak Band Sawmill Model BBS-0"3650E", serial # 13-721, up to 30' logs, chain turners, 90" off bearer belt, includes hydraulic pack, 1 1/4" x 36" bandwheels, 1 1/2" x 240" bands 162a * pallet of parts for Baker 3650 band mill 162b * Baker parts 3650 Band wheel Sheave and center main bearings. 162c * Baker 3650 band mill parts Full pallet 162d * baker 3650 band mill blades 1 pallet 163 Baker 4 Strand Log Deck with Stop and Load 16' x 20' 6" x 74" high, hydraulic drive 164 Barnsweep underneath Baker 48" x 36', hydraulic drive 165 Waste Conveyor 18" x 40', hydraulic drive, paddle chain 166 Ingersoll Rand Air Compressor Model 2545, serial # 1139425, 120 gallon vertical tank, electric motor 167 Wood-Mizer Single Head Resaw Model SHR, serial # SHR25-HD1204100200A1.05, 10' infeed and outfeed, 25 HP electric motor, 1 1/2" bands, 24" bandwheels, 10" x 10" capacity, 1 1/2" x 158" bands 167a * lot of blades for Woodmizer SHR 167b * slat feed chain Slat chain for resaw feed chain 81x chain 168 Meadows 3 Blade Edger Serial # 36D-1936-17, 16" blades, 4" x 36" capacity, feed rolls are worn, built in dust discharge blower, includes lasers, 2 moveable blades, 8' infeed and 8' outfeed clean and in good condition. 40 HP motor 169 Skate Roller 48" x 15' x 32" high 170 HWP Tilting Roll Case 40" x 20' x 54" high, 6" x 31" rolls, 16" roll spacing, 1 7/16" shaft, hydraulic drive 171 HWP Tilting Roll Case 40" x 10' x 54" high, 6" x 31" rolls, 16" roll spacing, 1 7/16" shaft, hydraulic drive 172 20 HP Hydraulic Pack Was used for tilting roll cases. 173 Roll Case with Kickoffs 32" x 35' x 58" high, hydraulic drive, 6" x 24" rolls, 25"-33" roll spacing 174 Baker 4 Strand Transfer Deck 16' x 16' x 36" high, hydraulic drive 175 5 HP Hydraulic Pack . 176 Pipers Saw Shop Chipper Knife Grinder Electric drive. 48" Bed 177 Wood-Mizer Band Sharpener Model LTAGAP-UM, serial # LTAGA/450/2012, electric drive 178 Wood-Mizer BMT200/250 Dual Tooth Setter . 179 Shipping Container set up as Sharpening Room 8' x 40', fully wired 180 HWP Shaving Machine 36" x 59" infeed box, 50 HP electric motor, 40 HP hydraulic pack, includes conveyor underneath, good working condition 181 HWP Log Deck 6' x 21', hydraulic drive, needs work 182 Paddle Chain Conveyor 20" x 25' with 9" sides, hydraulic drive 182A Holtec Transcut II #96226, 60" max cutting capacity, 3 phase electric motor 183 Yates-American A20 4 Sided Planer Matcher 15" wide, no drive, belt driven. Includes Infeed Table w/ (8) knife heads - top & bottom profile, 6 knife side heads belt driven, 20' pineapple feed table 183a Planer knives For Yates American 183B Transfer Deck* 3-strand, 4-strand, 183C Belt Conveyor* 12" belt, electric drive, 22' long 183D Green Chain* 3-strand, electric drive, 24' long 184 Lincoln Electric Motor 100 HP, 1775 RPM, frame 404T 185 Tooling for Yates A20 Planer 2" arbor 186 Tooling for Yates A20 Planer 2" arbor 187 Tooling for Yates A20 Planer 2" arbor 188 Tooling for Yates American A20 Planer 2" arbor 189 Tooling for Yates A20 Planer 2" arbor 190 Tooling for Yates A20 Planer 2" arbor 191 Parts for Yates A20 Planer . 192 Belt Drive Shaft . 192A Side Head Grinder* W/side head bits and wrenches, for A20 Planer, 193 Pulley Assembly For Yates Planer . 194 48" Dust Blower 50 HP electric motor 195 Mettler Toledo Scales Model LYNX, serial # 5521261-5DH, 12' x 75' 196 2000 Gallon Fuel Tank With Fill Hose 197 2000 Gallon Fuel Tank With Fill Hose 198 Fuel Tank 199 Fuel Tank 200 Fuel Tank Was used for hydraulic oil 300 2016 Tigercat 610E Grapple Skidder Serial # 6101154, enclosed cab, joystick, winch, heat & A/C, came straight out of the woods, was being used daily, good working condition. 3980 on the hour meter. 301 John Deere 548G Grapple Skidder PIN DW548GX577880, winch, open cab, meter reads 11,061 hrs. this was the backup machine so hasn't been used much in the last 3 years, works good 301A Skidder Grapple* Rough condition 302 Tigercat 718 Feller Buncher Serial # 7180607, just came out of woods, good working condition, the one door is bent but will try to have fixed by auction time, watch for updates. 303 Tigercat 240B Knuckleboom On Pitts trailer, enclosed cab, delimber, continuous swivel grapple, bucksaw hookups, came straight out of the woods, was being used daily, good working condition 304 Prentice 410E Knuckleboom Serial # E410PR60838, on trailer, enclosed cab, joystick, CTR Delimber, bucksaw hookup, continuous swivel grapple, Cummins Diesel engine, meter shows 1406 hours, has hydraulic leaks, was used being used daily, good working condition, one owner 305 CSI Bucksaw DL-4400 Classic, 50" bar, 73" x 25' 5" deck, lever controls, was used wit lot # 304 305A CSI Bucksaw 60" bar, 20' bunk 305AA Prentice 4100 Track Knuckleboom Model 3306, serial # 64732937, full cab, Cat Diesel engine, hours unknown, has some hydraulic leaks, lever controls, continuous swivel grapple, starter button is busted so needs to be hot wired to start, this machine is still being used daily, good working condition, 150" wide 306 410B Prentice Knuckleboom Serial # CP555-A-408, meter shows 794 hours, trailer is cut off, needs work or for parts only, enclosed cab 307 Volvo L90F Wheel Loader PIN L90FV68400, engine model DE6-LAE3, 160 HP, 5.7 L, full cab, heat and A/C, meter shows 12,141 hours, 4 speed, good working condition, does not include any attachments 308 Volvo L90E Wheel Loader PIN L90EV67825, engine model D6D-LAE2, 160 HP, 5.7 L full cab, heat and A/C, meter shows 5355 hours, 4 speed, good working condition, does not include any attachments 308A Sellick S80 Forklift Model S80, serial # 6199508582, 8000 pound lift, 3 stage mast, side shift, 2WD meter shows 6423 hours, good working condition, this lift will be retained for 3 weeks for loadout. Buyer will be able to pick up on October 7th 308B Cat LP Forklift Meter reads 1673 hrs. 2 stage mast, side shift, includes tank, works good 309 International S1900 Dump Truck Model 1954, VIN 1HTLDUXPXEHA24431, Eaton Transmission, meter shows 274,597 miles, was used as a yard truck, runs and operates 310 1989 Ford L8000 Dump Truck VIN 1FDYU82A3KVA53157, GVWR 53,100 pounds, meter shows 72,920 miles, was used as a yard truck, runs and operates, need to file for lost title. 311 1995 International 4900 Truck, VIN # 1HTSDAAN5SH605894 Year: 1995 Make: International Model: 4900 Vehicle Type: Truck Mileage: Plate: Body Type: Trim Level: Drive Line: 4x2 Engine Type: L6, 7.6L (466 CID) Fuel Type: Diesel Horsepower: Transmission: VIN #: 1HTSDAAN5SH605894 Features and Notes: meter shows 44,244 miles, works good, Barko loader sells separate, 1st lot of an entirety 311A Barko 80 Knuckleboom Model 5222, serial # 119522260006, extendable boom, with hydraulic power pack, very low hours, in excellent condition 311B Entirety Lot 311 & 311A With 10% raise 312 2002 Freightliner FL70 Crane Truck, VIN # 1FVABUAK42HK95912, Year: 2002 Make: Freightliner Model: FL70 Vehicle Type: Truck Mileage: Plate: Body Type: Trim Level: Drive Line: 4x2 Engine Type: L6, 7.2L (439 CID) Fuel Type: Diesel Horsepower: Transmission: VIN #: 1FVABUAK42HK95912 Features and Notes: GVWR 35,000 with Altec winch/Crane, 45' reach, meter shows 25,291 miles, 7434 hours, fully retractable, 30,000 pounds lift, fully extended 14,980 pounds, mon winch pull cap, 20,000 pounds, Cat Diesel engine, runs and operates, needs to file for lost title. 313 2007 Ford F-750 Truck, VIN # 3FRWF75T47V517861 Year: 2007 Make: Ford Model: F-750 Vehicle Type: Truck Mileage: Plate: Body Type: Regular Cab Trim Level: Drive Line: 4x2; Dual Rear Wheels Engine Type: L6, 7.2L Fuel Type: Diesel Horsepower: Transmission: VIN #: 3FRWF75T47V517861 Features and Notes: meter shows 41,497 miles, automatic transmission, heat and A/C, bed measures 92" x 14', 7.2L Cat Diesel engine, gooseneck hitch, works good 314 2003 International 9200i Truck, VIN # 2HSCEASR33C072489 Year: 2003 Make: International Model: 9200i Vehicle Type: Truck Mileage: Plate: Body Type: Trim Level: Drive Line: 6x4 Engine Type: L6, 14.6L (893 CID) Fuel Type: Diesel Horsepower: Transmission: VIN #: 2HSCEASR33C072489 Features and Notes: 475 HP Cat engine serial MBNO2528, GVWR 52,000, meter shows 1,155,906 miles, was used as a yard truck the last 4 years, runs and operates 315 2006 GMC C6500 Chip Truck, VIN # 1GDJ6C1G66F410643 Year: 2006 Make: GMC Model: C6500 Vehicle Type: Truck Mileage: Plate: Body Type: Conventional Cab & Chassis Trim Level: Drive Line: 4x2 Engine Type: V8, 8.1L; MFI Fuel Type: Gasoline Horsepower: Transmission: VIN #: 1GDJ6C1G66F410643 Features and Notes: 6 speed, used for tree trimming service, no front bumper, door handles on outside don't work 316 2008 Ford F-350 Pickup Truck, VIN # 1FTSX31538EE36520 Year: 2008 Make: Ford Model: F-350 Vehicle Type: Pickup Truck Mileage: 180,900 Plate: Body Type: 4 Door Cab; Super Cab Trim Level: XL; XLT; Lariat Drive Line: 4WD Engine Type: V8, 5.4L; SOHC Fuel Type: Gasoline Horsepower: 250-300HP Transmission: VIN #: 1FTSX31538EE36520 Features and Notes: Good working truck 317 2003 Ford F-150 Pickup Truck, VIN # 1FTRW07L33KB71307 Year: 2003 Make: Ford Model: F-150 Vehicle Type: Pickup Truck Mileage: Plate: Body Type: 4 Door Cab; Super Crew Trim Level: XLT; Lariat; King Ranch; Harley-Davidson Drive Line: RWD Engine Type: V8, 5.4L (330 CID); SOHC 16V; EFI Fuel Type: Gasoline Horsepower: 235-260HP Transmission: VIN #: 1FTRW07L33KB71307 Features and Notes: meter shows 165,918 miles, crew cab, Triton V8 engine 318 Tiger Special 6640 Tractor Enclosed cab, meter shows 2585 hours, PTO, engine runs, but needs clutch 319 2007 Electric Golf Car VIN SHAQ0728778001, club car, rear seat, built in charger 334 1993 Strick Van Trailer VIN 1S12E848XPE362384, box only, GVWR 65,000 pounds, 48' long, 102" wide, 119" sides 320 40' Genstar Chip Trailer 96" wide, 100" sides, good title and road ready 321 40' Chip Trailer 96" wide, 100" sides, good title and road ready 322 2000 ITI Open Top Chip Trailer VIN 1Z92A4328YT029276, model SDS-A3, GVWR 29,484, 42' x 94" x 106" sides, good title and road ready 323 40' Genstar Open Top Chip Trailer 96" wide, 96" sides, with tarp cover, good condition, good title and road ready 324 1995 40' Peerless Chip Trailer VIN 1PLE04229SPc18253, 94" wide x 109" sides, open top, good condition, good title and road ready 325 40' Open Top Chip Trailer 96" wide, 100" sides, good title and road ready 326 40' Maersk Open Top Chip Trailer 96" wide, 96" sides, with tarp cover, good title and road ready 326A Tri-Axle Equipment Trailer With Ramps 25' deck, hydraulic ramps, has self contained hydraulic unit. No Title 327 Equipment Trailer 48' overall, main deck 25', upper deck 115", 48" flip up ramps, good title and road ready 328 Equipment Trailer 34' overall, deck 246", 102" wide, pintle hitch, 72" flip up ramps, good title and road ready 329 1995 Pitts Lag Trailer Model LT-42-4, serial # LT42T35P950271, GVW 84,000, good title and road ready 330 42' AMC Log Trailer Good condition, good title and road ready 331 40' Log Trailer Flat bed with log bunks, 96" wide, good title and road ready 331A 40' Log Trailer Rough condition 337 Contents inside off Lot 336 Electrical boxes and wires 331B 48' Strick Van Trailers* Includes all content, Used for a chain saw shop, fully wired , No Axles, No title, 3- Chain saw grinders , oregon brand, 15- 3/4" deck saw chain, 24- 3/8 for 20" bar chains, 3-ctr bars for bunk saws, 332 40' Triton Chip Box 96" wide, 96" sides, open top, box only 333 40' ITEL Storage Container Serial # 733603, 96" wide, 108" sides 335 Steel Storage Container 20' long 96" wide, 101" sides, rough condition 336 Steel Storage Container 20' long 96" wide, 101" sides 336A Trailer Frame* Approx 42' , no axles 338 FMC Logging Skidder Complete but does not run 339 Allis Chalmers 7G Track Front End Loader Was running but weak power. Not cranked in couple years 340 Windham All Terrain Forklift Complete, motor blew gasket and is not running 341 Hydro-Tec Steam Pressure Washer Was bought in working condition but never used 372 Loader Forks 373 113" Loader Bucket Quick attach 374 115" Loader Bucket Quick attach 375 Loader Forks 60" forks, 3 5/8" hole, 7" wide 376 Quick Attach Loader Forks 88" forks, 25 1/2" from center of bottom pin to top of top pin, 40" center to center 377 110" Bucket Rough condition 378 Cat 3 In 1 Skid Steer Bucket 70", Needs new hydraulic hoses 379 Cat Loader Bucket 100", 2.4 yard bold on cutting edge 380 Cat Loader Bucket 100", approximately 2.75 yard bolt on cutting edge 381 Loader Forks 5" wide, 48" long, 3 1/4" hole 382 Loader Forks 53" forks, quick attach 383 Dual Cylinder 9' Loader Rake Serial # 29116ASH007, special VOLVO L90, quick attach 384 Extendaboom with Fork Pockets 36' reach, fork pockets are 4" x 6 1/2" 385 Quick Attach Loader Forks 50" forks, 64" wide 386 Quick Attach Loader Forks 56" forks, 80" wide 387 Quick Attach Bucket with Removable Forks 3 in 1 bucket, 94" wide, 42" forks 388 Quick Attach Grapple 90" wide, 58" forks 389 Quick Attach Grapple 64" wide, 53" forks 390 Wicker Quick Attach Grapple Model WEQL110E, serial # 13254, 88" wide, 54" forks 390A 14' Grader for Loader Fork pockets are 69" apart 391 Skid of Hubs 5 total Various growser teeth pieces 392 8 Chain Binders . 393 Skid of Wire Protectors . 394 Skid of Logging Safety Signs and Cones . 395 Loader Seat and Transmission . 396 Hydraulic Cylinders 56", 3" mounting hole, 3 smaller ones 397 4 Skids of Fans for Dry Kilns . 398 Tiger Boom Flail Serial # TBF-0525HP, 50" flail, hydraulic oil tank 399 60" mower Hydraulic motor 400 7' Marden Stalk Chopper Model SHLA36, serial # 99-92, needs new wheel 401 Woods Bat-Wing Mower Model 9318, serial # 661350, 15' overall, PTO drive 402 72" Dust Cyclone 13" round inlet, 24" round outlet 403 Mellott Drop Belt 40" x 15', up to 24" belt, no drive, air cylinder 404 Roto Flow Chip Screen Model BS-66, serial # 6-63-12, 1 7/8" screen, 6' x 6', electric drive 405 36" NYB Dust Blower No drive 406 Fuel Tank 64" x 144" 407 48" Mellott Chain Turner Hydraulic drive 408 15 HP Mellott Hydraulic Pack . 409 100 HP Hydraulic Pack . 410 Sumitomo Gear Box Model CHHS-6195Y-R2-43, serial # IL0119443, 1750 RPM 411 Swing Chop Saw 5 HP electric motor 412 24" Dust Blower No drive 412A Lumber Rack* 47" X 80" X 42" , Fork Pocket 413 3 Strand Log Deck 128" x 15' x 80" high, electric drive 414 3 Strand Transfer Deck 10' x 23', hydraulic drive 415 Loading Arms 102" x 128" 416 112" John Deere Blade 3 point attach 417 Sockets, Gaskets, Cant Hooks, Etc. 3/4" drive socket set 417A Steel Shafts and Pipe 2"-5" diameter 417B Drain Pipe 8" x 16'. 7 pieces 418 Dead Rolls 18" x 20' x 34" high, 2 1/2" x 14 1/2" rolls 418a * flat belt conveyor With tensioner. 15' x 26". No belt or drive. Includes skate roll section included 419 Yates Bandsaw #53590, 44" bandwheels, 5" bands, 40 HP electric motor 420 Dead Rolls 65" x 191", 6 1/2" x 60" rolls, 27" roll spacing 421 36" Chip Blower 15 HP electric motor 422 CM & E Norman Chipper Model 48, 8 knife, for parts or to rebuilt, no drive 423 Hourglass Rollcase 50" x 28' x 44" high, 17" x 36" rolls, 30" roll spacing, 2 1/2" shaft, no drive 424 Hourglass Rollcase 50" x 15' x 44" high, 17" x 36" rolls, 30" roll spacing, 2 1/2" shaft, hydraulic drive 425 Lightning 480 Resaw #134424 426 36" Dust Blower 20 HP electric motor 427 4 Strand Transfer Deck 128" x 17' x 8' high, has steel slide off 428 36" Catwalk and Structure . 429 CTR Bucksaw Model CTR50-1A, serial # 50-123, 9' bunk 430 2-Lift RMS 63" X 100" 431 1/2 Ton Dayton Hoist System . 432 Log Splitter Up to 6' logs, 10 HP electric motor 432A Loader Tires 20.5 R25 432B Live Roll Case* No drive, 48" X 6' 6" 433 Chop Saw 12' infeed, 9' outfeed, electric motor, 30" blade, air cylinders 433A Shop Built Upcut Saw 20" blade, 10 hp direct drive electric motor, 13' infeed, air operated kicker and saw 434 Drive Shaft 2 1/2" x 26' 435 Gardner Denver Air Compressor 40 HP electric motor, meter reads 46,637 hours 436 Round Fuel Tank 42" x 94" 437 Lumber Cart 56" x 57 1/2", steel wheels, 50 1/2" center to center of wheels 437A Lumber Cart 56" x 57 1/2", steel wheels, 50 1/2" center to center of wheels 437B Lumber Cart 56" x 57 1/2", steel wheels, 50 1/2" center to center of wheels 437C Lumber Cart 56" x 57 1/2", steel wheels, 50 1/2" center to center of wheels 437D Lumber Cart 56" x 57 1/2", steel wheels, 50 1/2" center to center of wheels 437E Lumber Cart 56" x 57 1/2", steel wheels, 50 1/2" center to center of wheels 438 Dust Collector 4- 22" outlets on bottom 438A Tires* 325/65R18, 275/65R18 438B Tires* Variety of sizes 438C Tires* Variety of sizes 438D Tires* Variety of sizes, 231/2" , 10 lug 438E Tires* Variety of Sizes, 25" rims , 10 lug 438F Cat Walk* 25" X 12' w/ 2 steps, Stairs 19 steps 20' long 438G Steel Frame* 20' X 53" high 438H Steel Frame* 12' high 439 Grader Wheels 14.00-24 tires, set of 4 440 North Star Power Washer and Air Compressor on Trailer Approximately 250 gallon water tank, Honda motor on both units 623 Kiln Dried Live Edge Slabs 5 pine 32"-40" x 12', 7 red oak 12"-18" x 12', 21 gum 16"-24" x 12', 8 white oak 18"-24" x 12', 8 sycamore 16"-20" x 12', 49 total, labeled Shed 4 441 Overhead Crane on Wheels 8' x 12' x 14' high 442 Frame and Axles . 443 Frame and Axles . 444 Frame and Single Axle 445 Asbury Multi-Purpose Bucket Model M125B, 3 1/2 yard, 10' wide 445A Rims* 34 1/2" dia, 32" wide, set of 4, 10 lug 445B Knuckleboom Grapple* . 445C Trash Bin* 48" X 72" X 49" deep, w/flip out door, Fork pockets 445D Trash Bin* 48" X 76" X 49" , W/flip out door, fork pockets 445E Self Dumping Hopper* Bes-pac, model SDH, Ser# 105487, 60" X 72" 446 Drain Pipe 8"-20" x 16' long 447 PVC Drain Pipe 8"-20' long 447A Pallet of Plumbing Parts* Couplers, etc. 448 115" Loader Bucket . 449 Pallet of Starters 450 Signumat split stopper hammer and clips 451 Signumat wood barcode hammer and couple hundred barcode clips 452 GEM sander / polisher Lots of extra sander paper for it and buffer rags 453 GEM sander buffer & extras 454 Uattend time clock system works with online website 455 Metal Pallet Cages 6 per lot 456 Metal Pallet Cages 6 per lot 457 Metal Pallet Cages 6 per lot 458 Metal Pallet Cages 6 per lot 600 Kiln Dried Live Edge Slabs* 22 pine 22"-34" x 12', 18 pine 16"-24" x 12', 14 pine 18"-24" x 12', 10 pine 16"-22" x 12', 12 pine 14"-20" x 12', 76 total, labeled 4A 601 Kiln Dried Live Edge Slabs 20 pine 20"-26" x 12', 14 pine 21"-36" x 12', 10 pine 21"-30" x 12', 10 pine 12"-24" x 12', 4 maple 12"-24" x 12', 12 pignut hickory 12"-18" x 12', 5 pecan 18"-39" x 12', 75 total, labeled 3A 602 Kiln Dried Live Edge Slabs 22 cypress 13"-37" x 12', 4 cypress 22"-26" x 12', 6 hickory 12"-21" x 12', 6 sycamore 16"-20" x 12', 6 cherry 12"-16" x 12', 1 live oak crotch 24"-40" x 12' (middle bad, only ends are good), 4 oak crotch 24"-40" x 10', 2 maple 18"-24" x 10', 2 cypress 16"-20" x 12', 53 total, labeled 2A 603 Kiln Dried Live Edge Slabs 5 white oak crotch 22"-40" x 12', 1 live oak 28"-34" x 8', 1 pine 22"-27" x 10', 4 white oak 18"-24" x 8' (crotch), 2 red oak 19"-29" x 8', 1 walnut 24" x 3' (thick) , labeled 1A 604 Kiln Dried Live Edge Slabs 6 oak 16"20" x 10', 6 pine 12"-18" x 12', 7 beech 12"-22" x 10', 4 sycamore 12"-18" x 10', 1 hickory 18" x 10', 2 white oak 14"-21" x 12', 10 pine 21"-24" x 12', 4 sap gum 19"-21" x 12', 2 sycamore 18"-24" x 8', 3 cherry 12" x 12', 8 red oak 2" x 8" and 10's x 12', 4 pignut hickory 8"-20" x 10', 3 maple 16"-20" x 10', 60 total, labeled 2B 605 Kiln Dried Live Edge Slabs 18 cypress 12"-18" x 12', 5 hickory 17"-24" x 10', 5 maple 16"-19" x 10', 2 pecan 18"-20" x 10', 30 total, labeled 1B 606 Kiln Dried Live Edge Slabs 4 spalted ash 14"-19" x 12', 4 pine 36" x 11' (thick), 4 spalted white oak 28"-34" x 11', 5 pine 27"-42" x 11', 1 red oak 24"-50" x 9', 18 total, labeled 1E 607 Kiln Dried Live Edge Slabs 10 maple 56"-60" x 60", labeled 1C 608 Kiln Dried Live Edge Slabs 11 sycamore 20"-30" x 12', 2 maple 12"-24" x 12', 4 pine 12"-18" x 12', 6 live oak 12"20" x 10', 3 sycamore 24"-30" x 12', 33 total, labeled 1D 609 Kiln Dried Live Edge Slabs 14 sycamore 10"-18" x 16', 8 hickory 10"-18" x 16', 4 pine 22"-26" x 16', 6 pine 14"-22" x 16', 5 crap oak boards, 1 hickory 12"-16" x 16', 2 white oak 3 x 11 x 16' beams, 1 pine 16"-18" x 16', 1 poplar 18" x 20" x 16', 2 hickory 18"-20" x 12', 4 sycamore 12"-20" x 16', 1 poplar 16"-18" x 16', 1 cypress 18"-20" x 16', 3 spalted red oak 20"-22" x 16', 4 spalted poplar 30"-36" x 16', 57 total, labeled 3E 610 Kiln Dried Live Edge Slabs 12 poplar 16"-32" x 16', 7 sycamore 16"-28" x 16', 6 poplar 12"-28" x 16', 18 cedar 9"-18" x 16', 2 oaks 17"-28" x 14', 2 hickory 12"-16" x 16', 6 spalted hickory 10"-18" x 14', 2 maple 16"-20" x 16', 6 ash 12"-20" x 16', 5 ash 10" x 16" x 16', 1 white oak 22"-24" x 16', 69 total, labeled 2E 611 Kiln Dried Live Edge Slabs 4 red oak 34"-40" x 7', 3 live oak 24" x 31" x 5' (thick), 9 walnut 20"-30" x 5' (crotch), 2 live oak 24"-27" x 5', 18 total, labeled 1F 612 Kiln Dried Live Edge Slabs 6 maple 40"-57" x 9', 4 live oak 26"-48" x 8', 4 maple 20"-36" x 7', 7 oak 21"-43" x 6', 21 total, labeled 2G 613 Kiln Dried Live Edge Slabs 4 red oak 32"-56" x 6', 4 live oak 20"-24" x 6', 1 red oak 36"-42" x 5', 3 red oak 22"-36" x 6', 2 live oak 15"-24" x 5', 14 total, labeled 1G 614 Kiln Dried Live Edge Slabs 25 poplar 3 x 6 x 8', 25 maple 3 x 6 x 8', 2 hickory 12"-22" x 8', 2 hickory 12"-18" x 8', 1 sinker heart cypress 24" x 8', 3 beech 2 x 10 x 7', 1 red oak 31" x 7', 1 ash 12" x 8', 1 sinker heart cypress 22" x 6', 1 walnut 24" - 40" x 6', 2 osage orange 22"-30" x 8', 3 ash 14"-19" x 8', 1 ash 12" x 8', 2 elm 18"-22" x 8', 5 red oak 14"-30" x 8', 3 white oak 12"-20" x 8', 78 total, labeled 4H 615 Kiln Dried Live Edge Slabs 3 live oak 34"-50" x 8', 6 white oak 14"-24" x 8', 6 white oak 12"-22" x 8', 6 maple 10"-18" x 8', 9 maple 12"-22" x 8', 4 cedar 12"-17" x 8', 7 maple 22"-36" x 8', 41 total, labeled 3H 616 Kiln Dried Live Edge Slabs 7 red oak 20"-24" x 8', 21 sinker heart pine 10"-15" x 7', 5 sinker pecky cypress 22"-27" x 7', 1 sinker pecky 24" x 5', 6 white oak 14"-24" x 8', 53 total, labeled 2H 617 Kiln Dried Live Edge Slabs 16 river birch 12"-19" x 9', 4 pine 12"-24" x 7', 6 pignut hickory 12"-21" x 8', 9 red oak 22"-49" x 7', 6 white oak 16"-28" x 7', 41 total, labeled 1H 618 Air Dried Mantels 44- 4"-8" thick x 8"-20" wide x 10 ' long mixed hardwood- oak, maple, hickory, gum, sycamore, ash, elm, 38- 4"-8" x 8"-18" wide x 8' long, same mixed hardwood, 82 total, labeled Mantels 1 619 Air Dried Mantels 3 cherry 6 x 6 x 8", 9 mixed oak, 2 pine 6 x 16 x 8', 3 sycamore 6"-10" x 8', 2 pine 12" x 20" x 8', total of 31, labeled Mantels 2 620 Kiln Dried Live Edge Slabs 5 pecan 24"-40" x 16', 34 maple and ash 12"-24" x 16', 39 total, labeled Shed 1 621 Kiln Dried Live Edge Slabs 7 white oak 16"-34" x 12', 1 red oak 20" x 12', 7 sinker heart pecky cypress 12"-18" x 12', 1 poplar 25" x 12', 11 pine 27"-42" x 12', 44 total, labeled Shed 2 622 Kiln Dried Live Edge Slabs 3 spalted maple 40"-47" x 12', 1 pine 34" x 12', 16 red cedar 14"-20" x 12', 11 pine 20"-30" x 12', 5 spalted maple 20"-28" x 12', 2 pine 18"-20" x 12', 1 cypress 16" x 12', 39 total, labeled Shed 3 622A Lumber Rack* 48" X 52" X 82" high, Fork Pockets 700 4 drawer file cabinets. Total of 12 behind hoop building 701 1 5 drawer and 2 lateral file cabinets behind hoop building 702 * pillow block taper lock bearings 1 pallet baker 3650 building 703 * maintenance tools Come a longs pipe wrenches energpac 704 * 2 pallets of drive v belts 705 * belting and tools Belt lacing. Lacing machine. Belt tighter belting 706 pallet of jockey grinders For headsaw and edger diamond wheel. Saw wrenches bit setter 707 aceyelyne hoses gauges welding rods Entire pallet 708 * pallet of solid tooth carbide tip saws Various diameter and arbor size. 709 * pallet of air cylinders and 1 hyd 710 pallet of misc Pulleys Babbitt filled bearings bushings sprockets 711 pallet of rods Keyway copper tube pipe wrench misc 712 * lot of steel banding. Clips and tool 713 * plastic strapping clamps 6 boxes. No strapping 714 polyester plastic strapping buckles and strapping tools Includes phosphated wire buckles. 6 boxes 14 boxes 2 coil box 3/4 inch. Includes 4 strapping tools 715 pallet of 81x chain 716 * 2 pallets of sprockets 1 large 1 small 717 * 1 pallet of roller chain. 718 * 1 pallet of roller chain 719 * pallet of roller drive chain Includes chain drags 720 * pallet of chain repair kits and more Pallet of roller chain and 81x. There are 2 pallets total in this lot 721 * 2 pallets of PQR size bushings 722 * pallet of R bushings . 723 * pallet of hydraulic cylinders 724 * box pallet of air parts Hoses. Directional valves filters cylinders 725 * lot of wood squares and 1/2 x 2 x 37 1/2 pieces 2 lots for 1. Baker 3650 building. 726 * 4’ stacking sticks as follows 45”. - 48” range 7 bins with contents 727 * new 5 bundles of 4’ stacking sticks All for one money 728 * 1 lot of 8 ‘ stacking sticks 729 loggibg tools Impact set radiator 730 logging parts Coolers and spool of cable 731 * logging parts Air hose lights 732 * logging parts Grease power packs. Mud flaps. And fuel tank 733 * 5” metal pipe tire tubes Firestone tire tubes. 9.0/10.00/16 734 * approx 27 alum. Crate 3 x 3 x 4. 735 * conveyor drive section with end sprocket section 736 * steel grating thread rod stick Weatherhead electrical entrance 737 * floursant light fixtures Approx 5 738 * Pendu 15” blower 5 hp 739 * cable pulley and steel section Includes 2 pallets. One with h 78 and RTR chain. 741 * chipper shroud steel 742 * lumber racking 4' x 10, package packing rack 743 * lumber racking 4' x 10, package packing rack 744 * 2 roll stand 747 Belt Conveyor* 20" X 35' 8" , no belt , no drive 748 Track & Frame* 60' track, 60" on center, 60' extra track, 749 Scrap Steel* I beams, Rods 750 Excel Gang Saw* Needs rebuilt 751 Vibrating Conveyor* 26" X 14' X 32" high, electric drive 752 3-Strand Log Deck* 12' X 30' X 100" high , no chain, no drive 758 Pallet of Misc* Benchtop Drill Press, electric drive, electric wire 759 Wrenches* 4" dust hose, sockets, etc 760 Nyle Dry Kiln System* Model L1200, Ser# 982297, Honeywell controls, inludes duct work 761 Pallet of Misc* Bolts, electric motors, Chain Hoist 762 Westair Drymatic* . 763 Westair Drymatic* Model Dac39a4/4 TS5, Ser# 391860, 3ph, 220 volts, Type R 22 764 Pentacryl Stabilizer* Green wood stabilizer, 5 gal, 5- full Containers, 765 Pallet of Hand Tools* Wrenches, grease guns, 40" 3/4 drive torque wrench, 766 Box of Misc* Tool box , bolts, etc 767 Pallet of Motors* 1/ hp, 2hp, 15hp 768 Pallet of Electric Motors* 5hp, 3hp, gear drives 769 Pallet of Nails* Variety of nails & screws 770 Pallet of electrical wire* . 771 Brand New Wood-Wiz Hand Winch* Straps, Pulleys 772 Grizzly Dust Collection* Model G0671, Ser# M161682, 4hp 773 Pallet of electrical parts* . 774 4 Ton Chain Hoist* . 775 Electrical Panels* . 776 * electrical entire pallet Starters push button. Fuses 777 2 pallets electrical Boxes motor controls 0-3 778 electrical connectors copper wire 1 pallet. 1 box of copper wire 779 * work table and drop cord 780 * electrical boxes and lights 2 pallets as marked 781 * 2 pallets. Motors. Electrical boxes 782 * propane lift cylinders Some fuel inside 783 * hobart handler 135 welder Includes helmets and rods 784 * show display package 2 tables and back drops 785 * pallet of fire extinguishers 786 * huge copper wire 2 pallets 787 * 3 x 4 roller table Good working height 788 Pallet of Nail guns* Paslode 789 Acme Transformer* No T3030K0023B, MODEL Doe2016 790 Air Compressor* Model Th5030, Ser# 70357, portable, 5hp honda, Westinghouse generator, Ryobi Radial Arm saw 790a Air compressor with Honda off of 790 791 Pallet of Misc* Oil sample kits, lug nuts 792 Metal Cart* 28" X 55" X 22" high, on casters 793 Pallet of Misc 794 * Table with contents Dewalt 2.5 gallon 135 psi electric air compressor. Two DEWALT FLEXVOLT 6AH BATTERIES. craftsman router Ryobi sawzall. Drills angle grinders skil saw desalt charging units 796 * roller table for slabs 2 space heaters, safety equipment, had casters first aide boxes 797 * Tri deck Steel clamps 798 * lumber tag inventory application. 799 * cleaning supplies Mop. Bucket. Broom hand waste pan 800 * North Star power washer Honda GC 190. Engine. 801 * saw horses Slab heavy duty saw hirses and table

Listing Information

After almost 70 years in operation Ashley River Lumber Company is changing gears and selling At Absolute Auction on Thursday September 16, 2020:
Complete logging operation to include but not limited to: TigerCat 718 Feller Buncher, TigerCAT 610E Grapple Skidder, TigerCat 240B knuckleboom Loader, (2) JD 548 trailers, service trucks, Sawmill and Shavings Operation to Include but not limited to: (2) Baker Sawmills with Brewco Grade Resaw, Planing and finishing equipment for rustic slab tables and mantles Hutto Wood Shavings Mill Complete, over 1000 slabs of live edge slabs, and much more

Information Lot
After almost 70 years in operation Ashley River Lumber Company is changing gears and selling At Absolute Auction on Thursday September 16, 2020:
Complete logging operation to include but not limited to: TigerCat 718 Feller Buncher, TigerCAT 610E Grapple Skidder, TigerCat 240B knuckleboom Loader, (2) JD 548 trailers, service trucks, Sawmill and Shavings Operation to Include but not limited to: (2) Baker Sawmills with Brewco Grade Resaw, Planing and finishing equipment for rustic slab tables and mantles Hutto Wood Shavings Mill Complete! and much more

Custom Wood Slab Processing From Wood to Finish
-2019 Baker Model LQ72 Horizontal Band Mill Custom Design, 50 HP Head Saw, Break, Hydraulic Strain, Model BBS-O-"LQ-72", S/N 19-964, (4) Dogs, 30' Bed, Sawyer's Console Controls & Setworks, Includes 5 HP Hydraulic Power Pack, Motor Controls, 3-Phase,
Dust Removal: 50" x 14" W Split Level Box Chain Conveyor W/ 81X Paddle Chain, Shaft Mount Gear Reduction Drive & 7.5 HP Motor, Incline Stacking Conveyor - Loyal 35' x 14" Wide Paddle Chain Stacking Conveyor W/ Gear Motor Drive, Bottom Ware Plate, 24" Sterling Dust/Shavings Collector Fan, Model IIMS W/ Approx. 10 HP Motor & Cyclone Collector

-Oliver Strait-O-Plane Roughing Planer Model 170, S/N 96386, Super Nice & Good Working Condition, Newman Helical Planer Heads W/ New Carbide Tips, 50 HP Top, 25 Hp Bottom, One Complete Set of Used Carbide Tips, (3) 10' x 24" Adjustable Height Gravity Roll Cases

-Tannewitz Band Saw Wide Cut for Thick and Wide Live Edge Slabs W/ Brake Newly Rewound Motor

-Dewalt Radial Arm Saw 30", 5 HP, 220/440V 3 Ph

-Wood Wiz Leveler by Baker Model CX6, S/N 1129, 5" Dia. Head W/ Table 6' x 17' x 8" Thick Capacity, Planer Head/Sanding Head & Edge Jointer Bit

-Wood Clamps, Rolling Material Handling Table every style & size you can image, Rolling Material Handling Table for easy transfer of Slab Pieces

-Ingersoll Rand Air Compressor Vertical Tank Mount Model # 2340, S/N NAR10184973 W/ Air Reserve Tank and Inline Air Dryer

-Kundig Top Sander Wide Belt 48" W/ Various Grit of Sand Paper on Hand

-Oliver Jointer Model 166 LD, 30" Wide, S/N 50084

-Misc. Chargeable Hand Tools Radial Chop Saw, accessories(Sprayers, needed for Completing)

-Delta Table Saw

-Vacutherm Vacupress Vacuum Dry Kiln W/ Small Diesel Fuel Boiler
newly replaced membrane and hoses

-8' x 8' x 40' Tall Reefer W/ Dehumidifier, Spray Foam Insulation, Lights, Exhaust Fans & updraft (Paint Booth)

-8' x 9' x 48' Insulated Roofer Container(Utility), Very Controlled Environment for Epoxy Work

-9' x 8' x 28' Kidron Storage Finished Good Climate Controlled

See Links in Additional Description
https://arlumber.com
https://www.instagram.com/ashleyriverlumber/?hl=en

100

2019 Baker LQ72 Band Sawmill
Model BBS-0"LQ-72", serial # 19-964, 72" x 30' logs, 36" bandwheels, 50 HP electric motor, late model with very little use, 1 1/2" x 334" bands

Slab Inventory that is Included
See the photos and list added to this lot

100A

New and Used Bands for Baker
Approximately 30 new and 50 used, 1 1/2" x 334" bands

101

36" Double Surface Oliver Straitoplane
Machine #107, serial #96386, spiral cutter heads, 50 HP on top cutter, 25 HP on bottom cutter, good condition, 6" capacity, has brand new teeth

101a

*carbide teeth for planer
3 full boxes approx 120 per box 1 big box of misc used teeth

101b

* Oliver strait-o-plane model 170 parts

102

Diehl Straight-line Ripsaw
10 HP electric motor, chain has wear

103

Porter Sliding Chopsaw
Model 47-A-20, serial # 69-5186, 18" blade, 20' infeed/outfeed rolls, electric drive

103a

*air hose and reel
Has quick disconnect

104

Single Head Brewco Resaw with Return
Model BEZCH, serial # BEZEO1367, 1" band, 20" bandwheels, 20 HP electric motor

104a

*new band blades for brewco ez cut

105

Gravity roll case
24" x 10' x 33" high, adjustable legs

106

Gravity roll case
24" x 10' x 33" high, adjustable legs

107

Gravity feed roll
24" x 10' x 33" high, adjustable legs

108

Waste Chain Conveyor
14" x 60' with 7" sides, electric drive along side the baker saw

109

24" Sterling Dust Blower
Electric drive Wsteel structure

110

60" Dust Cyclone
.

111

Waste Chain Conveyor
19" x 34' with 7" sides, electric drive

112

Baker Wood Wizz Surfacer
Model BWW"6X", serial # 17-021, 6' x 15' 6" capacity, up to 9" thick material, electric motor, in very good condition

113

Logosol 4-Sided Moulder
#PH260, 10" x 16" capacity, includes blower and box of profiles

112A

*WoodWizz winch for loading and unloading large slabs
Never used

114

Kundig Single Head Belt Sander
43" belt, good condition

114A

Gravity Rolls
Steel plate 16" x 60" x 31" high, 2 pieces

115

12"-14" Delta Rockwell Tilting Arbor Saw
.

116

24" Oliver Jointer
Machine # 166-ED, serial # 50084, 10 HP electric motor

116A

Oliver Jointer for Blades On Straightoplane
1/2 HP grinder for planer

116B

* Oliver jointer sharpner
Head mount

117

Gravity feed roll
24" x 10' x 33" high, adjustable legs

117a

*Stretcher roll for small bands
Includes personnel fan.

118

Tannewitz 24" Bandsaw
Model GH, serial # 78134, 7 1/2 HP electric drive motor, 2 1/4" x 36" bandwheels

119

DeWalt Radial Arm Saw
14" blade, 5 HP electric drive, 3 phase

124A

Steel Building beside Hoop Building
40' x 160' with 16' eves, roof only, no sides, rated to withstand winds up to 120 mph

120

Ingersoll Rand Air Compressor
Model 2340, serial # NAR10184973, 5 HP electric motor, 60 gallon vertical tank

121

Vertical Air Tank
32" x 72" tank

122

Dongan Transformer
.

123

Square D Transformer
.

124

Hoop Building
45' x 50', 2 man doors, 1 18' door, has new tarp still in box

124B

Steel Building behind Hoop Building
45' x 50' with 16' eves, roof only, no sides, rated to withstand winds up to 120 mph

124C

Kiln Direct Lumber Kiln
Inside measurements are 11'6" x 27' x 12' high, LP furnace, in like new condition

125

Spray Booth
48' van trailer converted to spray booth, has lights, A/C, etc. nice setup

126

Brewco B-1600 The Wolf Run Around Resaw System
Serial # BBFO22, 16" capacity, complete run around system, 40 HP electric motor, run around is hydraulic drive, 18' x 40' overall dimensions, 2" x 244" bands

126a

* brewco 1600 parts
Set of crowned wheels. Feed chain and end feed sprocket. Hydraulic motors; serves guides. New 2" blades

127

40 HP Hydraulic Pack
Was used for runaround

128

4 Strand Transfer Deck
12' x 16' x 36" high, hydraulic drive

129

Dead Rolls
3' x 14' x 90" high, 8" x 30" rolls, 36" roll spacing, 2 7/16" shaft

130

4 Strand Transfer Deck
9' x 12' x 40" high, hydraulic drive

131

10 HP Hydraulic Pack
Was used for decks

132

4 Strand Transfer Deck
7' x 10' x 30" high, hydraulic drive, missing 1 chain

133

Brewco B-4840 Grade Edger
Model BGBE, serial # BWD436, 16" blades, 8' infeed, 6' x 26' tailing belt, laser system, 5 HP hydraulic pack

134

Roll Case
40" x 50', 8 1/2" x 30" rolls, 42" roll spacing, 2 1/2" shaft, electric drive

135

Belt Conveyor
27" x 30' x 36" high, 20" belt (needs replaced), hydraulic drive

136

4 Strand Transfer Deck
12' 4" x 24' x 34" high, electric drive, H-130 rooftop chain

137

4 Strand Transfer Deck
12'4" x 12', electric drive

138

Newman K-2S Trim Saw
80" x 30', 24" blades, electric

139

Outfeed from Trim Saw
11' x 12', electric drive

140

Barnsweep under Brewco
48" x 25', electric drive

141

Waste Conveyor
25" x 75' with 12" sides, electric drive

142

Waste Conveyor on Incline
25" x 36' with 12" sides, electric drive

147

Steel Building
50' x 140', 18' sidewalls, roof only, open sides, rated to withstand winds up to 120 mph

143

Waste Conveyor
32" x 150' with 12" sides, electric drive

148

Steel Building
25' x 44', 16' sidewalls, 36" man door, has divider wall, roof is insulated but not sides, 1-18' roll up door, 1-12' roll up door, rated to withstand winds up to 120 mph

144

Waste Belt
30" x 40', 16" belt, 12" sides, electric drive

145

Quincy Compressor
Model QTH-120AMPRO, 10 HP electric motor, 120 gallon horizontal tank

145A

Electrical Boxes and Transformer
In building with Brewco

146

Steel Structure and Catwalk in Building with Brewco
Includes frame that scragg mill used to sit on.

149

Vacutherm
Model 500, serial # 06-502-8, 4' x 18' pan, diesel boiler, good condition

150

Go Fast Manual Chop Saw
80" infeed, 60" outfeed, 28" blade, electric motor

151

Holtec Pack Saw
60" cutting capacity, 25' infeed with lift arms, 21' outfeed, 15 HP electric motor, includes hydraulic pack

152

Waste Conveyor under Pack Saw
30" x 18' with additional 18' on incline, 30" belt, 12" sides, electric drive

153

Precision Chipper
Chipper size 66-18, serial # 6-2588, no drive, rough condition

153a

* 2 pallets of parts for precision chipper
Fits lot 153. Knives. Babbitt pot ladles counter knives fans
ect.

154

Lincoln Electric Motor
400 HP, 1780 RPM, frame 449T

154A

Electrical under Chipper
Soft start, main cutoff.

155

Precision Vibrating Conveyor
37" x 20', 24" pan, electric drive, infeed for chipper, does not include fiberglass section

156

Fiberglass Section and MDI XR-300 Metal Detector
24" pan x 60", has a few cracks

157

Chain Conveyor under Chipper
22" x 36' with 14" chain, electric drive

158

Precision Chip Screen
Serial # S-1927, 10' x 10', electric drive

159

Chain Conveyor
18" x 26', paddle chain, electric drive

160

Chain Conveyor
10" x 38', paddle chain, no drive

161

Phelps 2 Van Chip Blower
20 HP electric motor

162

Baker Super Streak Band Sawmill
Model BBS-0"3650E", serial # 13-721, up to 30' logs, chain turners, 90" off bearer belt, includes hydraulic pack, 1 1/4" x 36" bandwheels, 1 1/2" x 240" bands

162a

* pallet of parts for Baker 3650 band mill

162b

* Baker parts 3650
Band wheel Sheave and center main bearings.

162c

* Baker 3650 band mill parts
Full pallet

162d

* baker 3650 band mill blades
1 pallet

163

Baker 4 Strand Log Deck with Stop and Load
16' x 20' 6" x 74" high, hydraulic drive

164

Barnsweep underneath Baker
48" x 36', hydraulic drive

165

Waste Conveyor
18" x 40', hydraulic drive, paddle chain

166

Ingersoll Rand Air Compressor
Model 2545, serial # 1139425, 120 gallon vertical tank, electric motor

167

Wood-Mizer Single Head Resaw
Model SHR, serial # SHR25-HD1204100200A1.05, 10' infeed and outfeed, 25 HP electric motor, 1 1/2" bands, 24" bandwheels, 10" x 10" capacity, 1 1/2" x 158" bands

167a

* lot of blades for Woodmizer SHR

167b

* slat feed chain
Slat chain for resaw feed chain 81x chain

168

Meadows 3 Blade Edger
Serial # 36D-1936-17, 16" blades, 4" x 36" capacity, feed rolls are worn, built in dust discharge blower, includes lasers, 2 moveable blades, 8' infeed and 8' outfeed clean and in good condition. 40 HP motor

169

Skate Roller
48" x 15' x 32" high

170

HWP Tilting Roll Case
40" x 20' x 54" high, 6" x 31" rolls, 16" roll spacing, 1 7/16" shaft, hydraulic drive

171

HWP Tilting Roll Case
40" x 10' x 54" high, 6" x 31" rolls, 16" roll spacing, 1 7/16" shaft, hydraulic drive

172

20 HP Hydraulic Pack
Was used for tilting roll cases.

173

Roll Case with Kickoffs
32" x 35' x 58" high, hydraulic drive, 6" x 24" rolls, 25"-33" roll spacing

174

Baker 4 Strand Transfer Deck
16' x 16' x 36" high, hydraulic drive

175

5 HP Hydraulic Pack
.

176

Pipers Saw Shop Chipper Knife Grinder
Electric drive. 48" Bed

177

Wood-Mizer Band Sharpener
Model LTAGAP-UM, serial # LTAGA/450/2012, electric drive

178

Wood-Mizer BMT200/250 Dual Tooth Setter
.

179

Shipping Container set up as Sharpening Room
8' x 40', fully wired

180

HWP Shaving Machine
36" x 59" infeed box, 50 HP electric motor, 40 HP hydraulic pack, includes conveyor underneath, good working condition

181

HWP Log Deck
6' x 21', hydraulic drive, needs work

182

Paddle Chain Conveyor
20" x 25' with 9" sides, hydraulic drive

182A

Holtec Transcut II
#96226, 60" max cutting capacity, 3 phase electric motor

183

Yates-American A20 4 Sided Planer Matcher
15" wide, no drive, belt driven. Includes Infeed Table
w/ (8) knife heads - top & bottom profile, 6 knife side heads
belt driven,
20' pineapple feed table

183a

Planer knives
For Yates American

183B

Transfer Deck*
3-strand, 4-strand,

183C

Belt Conveyor*
12" belt, electric drive, 22' long

183D

Green Chain*
3-strand, electric drive, 24' long

184

Lincoln Electric Motor
100 HP, 1775 RPM, frame 404T

185

Tooling for Yates A20 Planer
2" arbor

186

Tooling for Yates A20 Planer
2" arbor

187

Tooling for Yates A20 Planer
2" arbor

188

Tooling for Yates American A20 Planer
2" arbor

189

Tooling for Yates A20 Planer
2" arbor

190

Tooling for Yates A20 Planer
2" arbor

191

Parts for Yates A20 Planer
.

192

Belt Drive Shaft
.

192A

Side Head Grinder*
W/side head bits and wrenches, for A20 Planer,

193

Pulley Assembly For Yates Planer
.

194

48" Dust Blower
50 HP electric motor

195

Mettler Toledo Scales
Model LYNX, serial # 5521261-5DH, 12' x 75'

196

2000 Gallon Fuel Tank With Fill Hose

197

2000 Gallon Fuel Tank With Fill Hose

198

Fuel Tank

199

Fuel Tank

200

Fuel Tank
Was used for hydraulic oil

300

2016 Tigercat 610E Grapple Skidder
Serial # 6101154, enclosed cab, joystick, winch, heat & A/C, came straight out of the woods, was being used daily, good working condition. 3980 on the hour meter.

301

John Deere 548G Grapple Skidder
PIN DW548GX577880, winch, open cab, meter reads 11,061 hrs. this was the backup machine so hasn't been used much in the last 3 years, works good

301A

Skidder Grapple*
Rough condition

302

Tigercat 718 Feller Buncher
Serial # 7180607, just came out of woods, good working condition, the one door is bent but will try to have fixed by auction time, watch for updates.

303

Tigercat 240B Knuckleboom
On Pitts trailer, enclosed cab, delimber, continuous swivel grapple, bucksaw hookups, came straight out of the woods, was being used daily, good working condition

304

Prentice 410E Knuckleboom
Serial # E410PR60838, on trailer, enclosed cab, joystick, CTR Delimber, bucksaw hookup, continuous swivel grapple, Cummins Diesel engine, meter shows 1406 hours, has hydraulic leaks, was used being used daily, good working condition, one owner

305

CSI Bucksaw
DL-4400 Classic, 50" bar, 73" x 25' 5" deck, lever controls, was used wit lot # 304

305A

CSI Bucksaw
60" bar, 20' bunk

305AA

Prentice 4100 Track Knuckleboom
Model 3306, serial # 64732937, full cab, Cat Diesel engine, hours unknown, has some hydraulic leaks, lever controls, continuous swivel grapple, starter button is busted so needs to be hot wired to start, this machine is still being used daily, good working condition, 150" wide

306

410B Prentice Knuckleboom
Serial # CP555-A-408, meter shows 794 hours, trailer is cut off, needs work or for parts only, enclosed cab

307

Volvo L90F Wheel Loader
PIN L90FV68400, engine model DE6-LAE3, 160 HP, 5.7 L, full cab, heat and A/C, meter shows 12,141 hours, 4 speed, good working condition, does not include any attachments

308

Volvo L90E Wheel Loader
PIN L90EV67825, engine model D6D-LAE2, 160 HP, 5.7 L full cab, heat and A/C, meter shows 5355 hours, 4 speed, good working condition, does not include any attachments

308A

Sellick S80 Forklift
Model S80, serial # 6199508582, 8000 pound lift, 3 stage mast, side shift, 2WD meter shows 6423 hours, good working condition, this lift will be retained for 3 weeks for loadout. Buyer will be able to pick up on October 7th

308B

Cat LP Forklift
Meter reads 1673 hrs. 2 stage mast, side shift, includes tank, works good

309

International S1900 Dump Truck
Model 1954, VIN 1HTLDUXPXEHA24431, Eaton Transmission, meter shows 274,597 miles, was used as a yard truck, runs and operates

310

1989 Ford L8000 Dump Truck
VIN 1FDYU82A3KVA53157, GVWR 53,100 pounds, meter shows 72,920 miles, was used as a yard truck, runs and operates, need to file for lost title.

311

1995 International 4900 Truck, VIN # 1HTSDAAN5SH605894
Year: 1995
Make: International
Model: 4900
Vehicle Type: Truck
Mileage:
Plate:
Body Type:
Trim Level:
Drive Line: 4x2
Engine Type: L6, 7.6L (466 CID)
Fuel Type: Diesel
Horsepower:
Transmission:
VIN #: 1HTSDAAN5SH605894

Features and Notes: meter shows 44,244 miles, works good, Barko loader sells separate, 1st lot of an entirety

311A

Barko 80 Knuckleboom
Model 5222, serial # 119522260006, extendable boom, with hydraulic power pack, very low hours, in excellent condition

311B

Entirety Lot 311 & 311A
With 10% raise

312

2002 Freightliner FL70 Crane Truck, VIN # 1FVABUAK42HK95912,
Year: 2002
Make: Freightliner
Model: FL70
Vehicle Type: Truck
Mileage:
Plate:
Body Type:
Trim Level:
Drive Line: 4x2
Engine Type: L6, 7.2L (439 CID)
Fuel Type: Diesel
Horsepower:
Transmission:
VIN #: 1FVABUAK42HK95912

Features and Notes: GVWR 35,000 with Altec winch/Crane, 45' reach, meter shows 25,291 miles, 7434 hours, fully retractable, 30,000 pounds lift, fully extended 14,980 pounds, mon winch pull cap, 20,000 pounds, Cat Diesel engine, runs and operates, needs to file for lost title.

313

2007 Ford F-750 Truck, VIN # 3FRWF75T47V517861
Year: 2007
Make: Ford
Model: F-750
Vehicle Type: Truck
Mileage:
Plate:
Body Type: Regular Cab
Trim Level:
Drive Line: 4x2; Dual Rear Wheels
Engine Type: L6, 7.2L
Fuel Type: Diesel
Horsepower:
Transmission:
VIN #: 3FRWF75T47V517861

Features and Notes: meter shows 41,497 miles, automatic transmission, heat and A/C, bed measures 92" x 14', 7.2L Cat Diesel engine, gooseneck hitch, works good

314

2003 International 9200i Truck, VIN # 2HSCEASR33C072489
Year: 2003
Make: International
Model: 9200i
Vehicle Type: Truck
Mileage:
Plate:
Body Type:
Trim Level:
Drive Line: 6x4
Engine Type: L6, 14.6L (893 CID)
Fuel Type: Diesel
Horsepower:
Transmission:
VIN #: 2HSCEASR33C072489

Features and Notes: 475 HP Cat engine serial MBNO2528, GVWR 52,000, meter shows 1,155,906 miles, was used as a yard truck the last 4 years, runs and operates

315

2006 GMC C6500 Chip Truck, VIN # 1GDJ6C1G66F410643
Year: 2006
Make: GMC
Model: C6500
Vehicle Type: Truck
Mileage:
Plate:
Body Type: Conventional Cab & Chassis
Trim Level:
Drive Line: 4x2
Engine Type: V8, 8.1L; MFI
Fuel Type: Gasoline
Horsepower:
Transmission:
VIN #: 1GDJ6C1G66F410643

Features and Notes: 6 speed, used for tree trimming service, no front bumper, door handles on outside don't work

316

2008 Ford F-350 Pickup Truck, VIN # 1FTSX31538EE36520
Year: 2008
Make: Ford
Model: F-350
Vehicle Type: Pickup Truck
Mileage: 180,900
Plate:
Body Type: 4 Door Cab; Super Cab
Trim Level: XL; XLT; Lariat
Drive Line: 4WD
Engine Type: V8, 5.4L; SOHC
Fuel Type: Gasoline
Horsepower: 250-300HP
Transmission:
VIN #: 1FTSX31538EE36520

Features and Notes: Good working truck

317

2003 Ford F-150 Pickup Truck, VIN # 1FTRW07L33KB71307
Year: 2003
Make: Ford
Model: F-150
Vehicle Type: Pickup Truck
Mileage:
Plate:
Body Type: 4 Door Cab; Super Crew
Trim Level: XLT; Lariat; King Ranch; Harley-Davidson
Drive Line: RWD
Engine Type: V8, 5.4L (330 CID); SOHC 16V; EFI
Fuel Type: Gasoline
Horsepower: 235-260HP
Transmission:
VIN #: 1FTRW07L33KB71307

Features and Notes: meter shows 165,918 miles, crew cab, Triton V8 engine

318

Tiger Special 6640 Tractor
Enclosed cab, meter shows 2585 hours, PTO, engine runs, but needs clutch

319

2007 Electric Golf Car
VIN SHAQ0728778001, club car, rear seat, built in charger

334

1993 Strick Van Trailer
VIN 1S12E848XPE362384, box only, GVWR 65,000 pounds, 48' long, 102" wide, 119" sides

320

40' Genstar Chip Trailer
96" wide, 100" sides, good title and road ready

321

40' Chip Trailer
96" wide, 100" sides, good title and road ready

322

2000 ITI Open Top Chip Trailer
VIN 1Z92A4328YT029276, model SDS-A3, GVWR 29,484, 42' x 94" x 106" sides, good title and road ready

323

40' Genstar Open Top Chip Trailer
96" wide, 96" sides, with tarp cover, good condition, good title and road ready

324

1995 40' Peerless Chip Trailer
VIN 1PLE04229SPc18253, 94" wide x 109" sides, open top, good condition, good title and road ready

325

40' Open Top Chip Trailer
96" wide, 100" sides, good title and road ready

326

40' Maersk Open Top Chip Trailer
96" wide, 96" sides, with tarp cover, good title and road ready

326A

Tri-Axle Equipment Trailer With Ramps
25' deck, hydraulic ramps, has self contained hydraulic unit. No Title

327

Equipment Trailer
48' overall, main deck 25', upper deck 115", 48" flip up ramps, good title and road ready

328

Equipment Trailer
34' overall, deck 246", 102" wide, pintle hitch, 72" flip up ramps, good title and road ready

329

1995 Pitts Lag Trailer
Model LT-42-4, serial # LT42T35P950271, GVW 84,000, good title and road ready

330

42' AMC Log Trailer
Good condition, good title and road ready

331

40' Log Trailer
Flat bed with log bunks, 96" wide, good title and road ready

331A

40' Log Trailer
Rough condition

337

Contents inside off Lot 336
Electrical boxes and wires

331B

48' Strick Van Trailers*
Includes all content, Used for a chain saw shop, fully wired , No Axles, No title, 3- Chain saw grinders , oregon brand, 15- 3/4" deck saw chain, 24- 3/8 for 20" bar chains, 3-ctr bars for bunk saws,

332

40' Triton Chip Box
96" wide, 96" sides, open top, box only

333

40' ITEL Storage Container
Serial # 733603, 96" wide, 108" sides

335

Steel Storage Container
20' long 96" wide, 101" sides, rough condition

336

Steel Storage Container
20' long 96" wide, 101" sides

336A

Trailer Frame*
Approx 42' , no axles

338

*FMC Logging Skidder
Complete but does not run

339

*Allis Chalmers 7G Track Front End Loader
Was running but weak power. Not cranked in couple years

340

*Windham All Terrain Forklift
Complete, motor blew gasket and is not running

341

*Hydro-Tec Steam Pressure Washer
Was bought in working condition but never used

372

Loader Forks

373

113" Loader Bucket
Quick attach

374

115" Loader Bucket
Quick attach

375

Loader Forks
60" forks, 3 5/8" hole, 7" wide

376

Quick Attach Loader Forks
88" forks, 25 1/2" from center of bottom pin to top of top pin, 40" center to center

377

110" Bucket
Rough condition

378

Cat 3 In 1 Skid Steer Bucket
70", Needs new hydraulic hoses

379

Cat Loader Bucket
100", 2.4 yard bold on cutting edge

380

Cat Loader Bucket
100", approximately 2.75 yard bolt on cutting edge

381

Loader Forks
5" wide, 48" long, 3 1/4" hole

382

Loader Forks
53" forks, quick attach

383

Dual Cylinder 9' Loader Rake
Serial # 29116ASH007, special VOLVO L90, quick attach

384

Extendaboom with Fork Pockets
36' reach, fork pockets are 4" x 6 1/2"

385

Quick Attach Loader Forks
50" forks, 64" wide

386

Quick Attach Loader Forks
56" forks, 80" wide

387

Quick Attach Bucket with Removable Forks
3 in 1 bucket, 94" wide, 42" forks

388

Quick Attach Grapple
90" wide, 58" forks

389

Quick Attach Grapple
64" wide, 53" forks

390

Wicker Quick Attach Grapple
Model WEQL110E, serial # 13254, 88" wide, 54" forks

390A

14' Grader for Loader
Fork pockets are 69" apart

391

Skid of Hubs
5 total Various growser teeth pieces

392

8 Chain Binders
.

393

Skid of Wire Protectors
.

394

Skid of Logging Safety Signs and Cones
.

395

Loader Seat and Transmission
.

396

Hydraulic Cylinders
56", 3" mounting hole, 3 smaller ones

397

4 Skids of Fans for Dry Kilns
.

398

Tiger Boom Flail
Serial # TBF-0525HP, 50" flail, hydraulic oil tank

399

60" mower
Hydraulic motor

400

7' Marden Stalk Chopper
Model SHLA36, serial # 99-92, needs new wheel

401

Woods Bat-Wing Mower
Model 9318, serial # 661350, 15' overall, PTO drive

402

72" Dust Cyclone
13" round inlet, 24" round outlet

403

Mellott Drop Belt
40" x 15', up to 24" belt, no drive, air cylinder

404

Roto Flow Chip Screen
Model BS-66, serial # 6-63-12, 1 7/8" screen, 6' x 6', electric drive

405

36" NYB Dust Blower
No drive

406

Fuel Tank
64" x 144"

407

48" Mellott Chain Turner
Hydraulic drive

408

15 HP Mellott Hydraulic Pack
.

409

100 HP Hydraulic Pack
.

410

Sumitomo Gear Box
Model CHHS-6195Y-R2-43, serial # IL0119443, 1750 RPM

411

Swing Chop Saw
5 HP electric motor

412

24" Dust Blower
No drive

412A

Lumber Rack*
47" X 80" X 42" , Fork Pocket

413

3 Strand Log Deck
128" x 15' x 80" high, electric drive

414

3 Strand Transfer Deck
10' x 23', hydraulic drive

415

Loading Arms
102" x 128"

416

112" John Deere Blade
3 point attach

417

Sockets, Gaskets, Cant Hooks, Etc.
3/4" drive socket set

417A

Steel Shafts and Pipe
2"-5" diameter

417B

Drain Pipe
8" x 16'. 7 pieces

418

Dead Rolls
18" x 20' x 34" high, 2 1/2" x 14 1/2" rolls

418a

* flat belt conveyor
With tensioner. 15' x 26". No belt or drive. Includes
skate roll section included

419

Yates Bandsaw
#53590, 44" bandwheels, 5" bands, 40 HP electric motor

420

Dead Rolls
65" x 191", 6 1/2" x 60" rolls, 27" roll spacing

421

36" Chip Blower
15 HP electric motor

422

CM & E Norman Chipper
Model 48, 8 knife, for parts or to rebuilt, no drive

423

Hourglass Rollcase
50" x 28' x 44" high, 17" x 36" rolls, 30" roll spacing, 2 1/2" shaft, no drive

424

Hourglass Rollcase
50" x 15' x 44" high, 17" x 36" rolls, 30" roll spacing, 2 1/2" shaft, hydraulic drive

425

Lightning 480 Resaw
#134424

426

36" Dust Blower
20 HP electric motor

427

4 Strand Transfer Deck
128" x 17' x 8' high, has steel slide off

428

36" Catwalk and Structure
.

429

CTR Bucksaw
Model CTR50-1A, serial # 50-123, 9' bunk

430

2-Lift RMS
63" X 100"

431

1/2 Ton Dayton Hoist System
.

432

Log Splitter
Up to 6' logs, 10 HP electric motor

432A

Loader Tires
20.5 R25

432B

Live Roll Case*
No drive, 48" X 6' 6"

433

Chop Saw
12' infeed, 9' outfeed, electric motor, 30" blade, air cylinders

433A

Shop Built Upcut Saw
20" blade, 10 hp direct drive electric motor, 13' infeed, air operated kicker and saw

434

Drive Shaft
2 1/2" x 26'

435

Gardner Denver Air Compressor
40 HP electric motor, meter reads 46,637 hours

436

Round Fuel Tank
42" x 94"

437

Lumber Cart
56" x 57 1/2", steel wheels, 50 1/2" center to center of wheels

437A

Lumber Cart
56" x 57 1/2", steel wheels, 50 1/2" center to center of wheels

437B

Lumber Cart
56" x 57 1/2", steel wheels, 50 1/2" center to center of wheels

437C

Lumber Cart
56" x 57 1/2", steel wheels, 50 1/2" center to center of wheels

437D

Lumber Cart
56" x 57 1/2", steel wheels, 50 1/2" center to center of wheels

437E

Lumber Cart
56" x 57 1/2", steel wheels, 50 1/2" center to center of wheels

438

Dust Collector
4- 22" outlets on bottom

438A

Tires*
325/65R18, 275/65R18

438B

Tires*
Variety of sizes

438C

Tires*
Variety of sizes

438D

Tires*
Variety of sizes, 231/2" , 10 lug

438E

Tires*
Variety of Sizes, 25" rims , 10 lug

438F

Cat Walk*
25" X 12' w/ 2 steps, Stairs 19 steps 20' long

438G

Steel Frame*
20' X 53" high

438H

Steel Frame*
12' high

439

Grader Wheels
14.00-24 tires, set of 4

440

North Star Power Washer and Air Compressor on Trailer
Approximately 250 gallon water tank, Honda motor on both units

623

Kiln Dried Live Edge Slabs
5 pine 32"-40" x 12', 7 red oak 12"-18" x 12', 21 gum 16"-24" x 12', 8 white oak 18"-24" x 12', 8 sycamore 16"-20" x 12', 49 total, labeled Shed 4

441

Overhead Crane on Wheels
8' x 12' x 14' high

442

Frame and Axles
.

443

Frame and Axles
.

444

Frame and Single Axle

445

Asbury Multi-Purpose Bucket
Model M125B, 3 1/2 yard, 10' wide

445A

Rims*
34 1/2" dia, 32" wide, set of 4, 10 lug

445B

Knuckleboom Grapple*
.

445C

Trash Bin*
48" X 72" X 49" deep, w/flip out door, Fork pockets

445D

Trash Bin*
48" X 76" X 49" , W/flip out door, fork pockets

445E

Self Dumping Hopper*
Bes-pac, model SDH, Ser# 105487, 60" X 72"

446

Drain Pipe
8"-20" x 16' long

447

PVC Drain Pipe
8"-20' long

447A

Pallet of Plumbing Parts*
Couplers, etc.

448

115" Loader Bucket
.

449

Pallet of Starters

450

*Signumat split stopper hammer and clips

451

*Signumat wood barcode hammer and couple hundred barcode clips

452

*GEM sander / polisher
Lots of extra sander paper for it and buffer rags

453

*GEM sander buffer & extras

454

*Uattend time clock system
works with online website

455

*Metal Pallet Cages
6 per lot

456

*Metal Pallet Cages
6 per lot

457

*Metal Pallet Cages
6 per lot

458

*Metal Pallet Cages
6 per lot

600

Kiln Dried Live Edge Slabs
22 pine 22"-34" x 12', 18 pine 16"-24" x 12', 14 pine 18"-24" x 12', 10 pine 16"-22" x 12', 12 pine 14"-20" x 12', 76 total, labeled 4A

601

Kiln Dried Live Edge Slabs
20 pine 20"-26" x 12', 14 pine 21"-36" x 12', 10 pine 21"-30" x 12', 10 pine 12"-24" x 12', 4 maple 12"-24" x 12', 12 pignut hickory 12"-18" x 12', 5 pecan 18"-39" x 12', 75 total, labeled 3A

602

Kiln Dried Live Edge Slabs
22 cypress 13"-37" x 12', 4 cypress 22"-26" x 12', 6 hickory 12"-21" x 12', 6 sycamore 16"-20" x 12', 6 cherry 12"-16" x 12', 1 live oak crotch 24"-40" x 12' (middle bad, only ends are good), 4 oak crotch 24"-40" x 10', 2 maple 18"-24" x 10', 2 cypress 16"-20" x 12', 53 total, labeled 2A

603

Kiln Dried Live Edge Slabs
5 white oak crotch 22"-40" x 12', 1 live oak 28"-34" x 8', 1 pine 22"-27" x 10', 4 white oak 18"-24" x 8' (crotch), 2 red oak 19"-29" x 8', 1 walnut 24" x 3' (thick) , labeled 1A

604

Kiln Dried Live Edge Slabs
6 oak 16"20" x 10', 6 pine 12"-18" x 12', 7 beech 12"-22" x 10', 4 sycamore 12"-18" x 10', 1 hickory 18" x 10', 2 white oak 14"-21" x 12', 10 pine 21"-24" x 12', 4 sap gum 19"-21" x 12', 2 sycamore 18"-24" x 8', 3 cherry 12" x 12', 8 red oak 2" x 8" and 10's x 12', 4 pignut hickory 8"-20" x 10', 3 maple 16"-20" x 10', 60 total, labeled 2B

605

Kiln Dried Live Edge Slabs
18 cypress 12"-18" x 12', 5 hickory 17"-24" x 10', 5 maple 16"-19" x 10', 2 pecan 18"-20" x 10', 30 total, labeled 1B

606

Kiln Dried Live Edge Slabs
4 spalted ash 14"-19" x 12', 4 pine 36" x 11' (thick), 4 spalted white oak 28"-34" x 11', 5 pine 27"-42" x 11', 1 red oak 24"-50" x 9', 18 total, labeled 1E

607

Kiln Dried Live Edge Slabs
10 maple 56"-60" x 60", labeled 1C

608

Kiln Dried Live Edge Slabs
11 sycamore 20"-30" x 12', 2 maple 12"-24" x 12', 4 pine 12"-18" x 12', 6 live oak 12"20" x 10', 3 sycamore 24"-30" x 12', 33 total, labeled 1D

609

Kiln Dried Live Edge Slabs
14 sycamore 10"-18" x 16', 8 hickory 10"-18" x 16', 4 pine 22"-26" x 16', 6 pine 14"-22" x 16', 5 crap oak boards, 1 hickory 12"-16" x 16', 2 white oak 3 x 11 x 16' beams, 1 pine 16"-18" x 16', 1 poplar 18" x 20" x 16', 2 hickory 18"-20" x 12', 4 sycamore 12"-20" x 16', 1 poplar 16"-18" x 16', 1 cypress 18"-20" x 16', 3 spalted red oak 20"-22" x 16', 4 spalted poplar 30"-36" x 16', 57 total, labeled 3E

610

Kiln Dried Live Edge Slabs
12 poplar 16"-32" x 16', 7 sycamore 16"-28" x 16', 6 poplar 12"-28" x 16', 18 cedar 9"-18" x 16', 2 oaks 17"-28" x 14', 2 hickory 12"-16" x 16', 6 spalted hickory 10"-18" x 14', 2 maple 16"-20" x 16', 6 ash 12"-20" x 16', 5 ash 10" x 16" x 16', 1 white oak 22"-24" x 16', 69 total, labeled 2E

611

Kiln Dried Live Edge Slabs
4 red oak 34"-40" x 7', 3 live oak 24" x 31" x 5' (thick), 9 walnut 20"-30" x 5' (crotch), 2 live oak 24"-27" x 5', 18 total, labeled 1F

612

Kiln Dried Live Edge Slabs
6 maple 40"-57" x 9', 4 live oak 26"-48" x 8', 4 maple 20"-36" x 7', 7 oak 21"-43" x 6', 21 total, labeled 2G

613

Kiln Dried Live Edge Slabs
4 red oak 32"-56" x 6', 4 live oak 20"-24" x 6', 1 red oak 36"-42" x 5', 3 red oak 22"-36" x 6', 2 live oak 15"-24" x 5', 14 total, labeled 1G

614

Kiln Dried Live Edge Slabs
25 poplar 3 x 6 x 8', 25 maple 3 x 6 x 8', 2 hickory 12"-22" x 8', 2 hickory 12"-18" x 8', 1 sinker heart cypress 24" x 8', 3 beech 2 x 10 x 7', 1 red oak 31" x 7', 1 ash 12" x 8', 1 sinker heart cypress 22" x 6', 1 walnut 24" - 40" x 6', 2 osage orange 22"-30" x 8', 3 ash 14"-19" x 8', 1 ash 12" x 8', 2 elm 18"-22" x 8', 5 red oak 14"-30" x 8', 3 white oak 12"-20" x 8', 78 total, labeled 4H

615

Kiln Dried Live Edge Slabs
3 live oak 34"-50" x 8', 6 white oak 14"-24" x 8', 6 white oak 12"-22" x 8', 6 maple 10"-18" x 8', 9 maple 12"-22" x 8', 4 cedar 12"-17" x 8', 7 maple 22"-36" x 8', 41 total, labeled 3H

616

Kiln Dried Live Edge Slabs
7 red oak 20"-24" x 8', 21 sinker heart pine 10"-15" x 7', 5 sinker pecky cypress 22"-27" x 7', 1 sinker pecky 24" x 5', 6 white oak 14"-24" x 8', 53 total, labeled 2H

617

Kiln Dried Live Edge Slabs
16 river birch 12"-19" x 9', 4 pine 12"-24" x 7', 6 pignut hickory 12"-21" x 8', 9 red oak 22"-49" x 7', 6 white oak 16"-28" x 7', 41 total, labeled 1H

618

Air Dried Mantels
44- 4"-8" thick x 8"-20" wide x 10 ' long mixed hardwood- oak, maple, hickory, gum, sycamore, ash, elm, 38- 4"-8" x 8"-18" wide x 8' long, same mixed hardwood, 82 total, labeled Mantels 1

619

Air Dried Mantels
3 cherry 6 x 6 x 8", 9 mixed oak, 2 pine 6 x 16 x 8', 3 sycamore 6"-10" x 8', 2 pine 12" x 20" x 8', total of 31, labeled Mantels 2

620

Kiln Dried Live Edge Slabs
5 pecan 24"-40" x 16', 34 maple and ash 12"-24" x 16', 39 total, labeled Shed 1

621

Kiln Dried Live Edge Slabs
7 white oak 16"-34" x 12', 1 red oak 20" x 12', 7 sinker heart pecky cypress 12"-18" x 12', 1 poplar 25" x 12', 11 pine 27"-42" x 12', 44 total, labeled Shed 2

622

Kiln Dried Live Edge Slabs
3 spalted maple 40"-47" x 12', 1 pine 34" x 12', 16 red cedar 14"-20" x 12', 11 pine 20"-30" x 12', 5 spalted maple 20"-28" x 12', 2 pine 18"-20" x 12', 1 cypress 16" x 12', 39 total, labeled Shed 3

622A

Lumber Rack*
48" X 52" X 82" high, Fork Pockets

700

*4 drawer file cabinets.
Total of 12 behind hoop building

701

*1 5 drawer and 2 lateral file cabinets
behind hoop building

702

* pillow block taper lock bearings
1 pallet baker 3650 building

703

* maintenance tools
Come a longs pipe wrenches energpac

704

* 2 pallets of drive v belts

705

* belting and tools
Belt lacing. Lacing machine. Belt tighter belting

706

*pallet of jockey grinders
For headsaw and edger diamond wheel. Saw wrenches bit setter

707

*aceyelyne hoses gauges welding rods
Entire pallet

708

* pallet of solid tooth carbide tip saws
Various diameter and arbor size.

709

* pallet of air cylinders and 1 hyd

710

*pallet of misc
Pulleys Babbitt filled bearings bushings sprockets

711

* pallet of rods
Keyway copper tube pipe wrench misc

712

* lot of steel banding. Clips and tool

713

* plastic strapping clamps
6 boxes. No strapping

714

*polyester plastic strapping buckles and strapping tools
Includes phosphated wire buckles. 6 boxes
14 boxes 2 coil box 3/4 inch. Includes 4 strapping tools

715

*pallet of 81x chain

716

* 2 pallets of sprockets
1 large 1 small

717

* 1 pallet of roller chain.

718

* 1 pallet of roller chain

719

* pallet of roller drive chain
Includes chain drags

720

* pallet of chain repair kits and more
Pallet of roller chain and 81x. There are 2 pallets total in this lot

721

* 2 pallets of PQR size bushings

722

* pallet of R bushings
.

723

* pallet of hydraulic cylinders

724

* box pallet of air parts
Hoses. Directional valves filters cylinders

725

* lot of wood squares and 1/2 x 2 x 37 1/2 pieces
2 lots for 1. Baker 3650 building.

726

* 4’ stacking sticks as follows 45”. - 48” range
7 bins with contents

727

* new 5 bundles of 4’ stacking sticks
All for one money

728

* 1 lot of 8 ‘ stacking sticks

729

*loggibg tools
Impact set radiator

730

* logging parts
Coolers and spool of cable

731

* logging parts
Air hose lights

732

* logging parts
Grease power packs. Mud flaps. And fuel tank

733

* 5” metal pipe tire tubes
Firestone tire tubes. 9.0/10.00/16

734

* approx 27 alum. Crate
3 x 3 x 4.

735

* conveyor drive section with end sprocket section

736

* steel grating thread rod stick
Weatherhead electrical entrance

737

* floursant light fixtures
Approx 5

738

* Pendu 15” blower 5 hp

739

* cable pulley and steel section
Includes 2 pallets. One with h 78 and RTR chain.

741

* chipper shroud steel

742

* lumber racking
4' x 10, package packing rack

743

* lumber racking
4' x 10, package packing rack

744

* 2 roll stand

747

Belt Conveyor*
20" X 35' 8" , no belt , no drive

748

Track & Frame*
60' track, 60" on center, 60' extra track,

749

Scrap Steel*
I beams, Rods

750

Excel Gang Saw*
Needs rebuilt

751

Vibrating Conveyor*
26" X 14' X 32" high, electric drive

752

3-Strand Log Deck*
12' X 30' X 100" high , no chain, no drive

758

Pallet of Misc*
Benchtop Drill Press, electric drive, electric wire

759

Wrenches*
4" dust hose, sockets, etc

760

Nyle Dry Kiln System*
Model L1200, Ser# 982297, Honeywell controls, inludes duct work

761

Pallet of Misc*
Bolts, electric motors, Chain Hoist

762

Westair Drymatic*
.

763

Westair Drymatic*
Model Dac39a4/4 TS5, Ser# 391860, 3ph, 220 volts, Type R 22

764

Pentacryl Stabilizer*
Green wood stabilizer, 5 gal, 5- full Containers,

765

Pallet of Hand Tools*
Wrenches, grease guns, 40" 3/4 drive torque wrench,

766

Box of Misc*
Tool box , bolts, etc

767

Pallet of Motors*
1/ hp, 2hp, 15hp

768

Pallet of Electric Motors*
5hp, 3hp, gear drives

769

Pallet of Nails*
Variety of nails & screws

770

Pallet of electrical wire*
.

771

Brand New Wood-Wiz Hand Winch*
Straps, Pulleys

772

Grizzly Dust Collection*
Model G0671, Ser# M161682, 4hp

773

Pallet of electrical parts*
.

774

4 Ton Chain Hoist*
.

775

Electrical Panels*
.

776

* electrical entire pallet
Starters push button. Fuses

777

*2 pallets electrical
Boxes motor controls 0-3

778

* electrical connectors copper wire
1 pallet. 1 box of copper wire

779

* work table and drop cord

780

* electrical boxes and lights
2 pallets as marked

781

* 2 pallets. Motors. Electrical boxes

782

* propane lift cylinders
Some fuel inside

783

* hobart handler 135 welder
Includes helmets and rods

784

* show display package
2 tables and back drops

785

* pallet of fire extinguishers

786

* huge copper wire
2 pallets

787

* 3 x 4 roller table
Good working height

788

Pallet of Nail guns*
Paslode

789

Acme Transformer*
No T3030K0023B, MODEL Doe2016

790

Air Compressor*
Model Th5030, Ser# 70357, portable, 5hp honda, Westinghouse generator, Ryobi Radial Arm saw

790a

Air compressor with Honda off of 790

791

Pallet of Misc*
Oil sample kits, lug nuts

792

Metal Cart*
28" X 55" X 22" high, on casters

793

Pallet of Misc

794

* Table with contents
Dewalt 2.5 gallon 135 psi electric air compressor. Two DEWALT FLEXVOLT 6AH BATTERIES.
craftsman router
Ryobi sawzall. Drills angle grinders skil saw desalt charging units

796

* roller table for slabs
2 space heaters, safety equipment, had casters first aide boxes

797

* Tri deck
Steel clamps

798

* lumber tag inventory application.

799

* cleaning supplies
Mop. Bucket. Broom hand waste pan

800

* North Star power washer
Honda GC 190. Engine.

801

* saw horses
Slab heavy duty saw hirses and table

Photo Gallery

Gallery 1 (2000 images) Gallery 2 (463 images)

Share This Listing

Other Sales by
This Company

Jun 6
Orland, IN

Jun 11
Union City, MI

Jun 11
Various, IN

Jun 11
West Baden Springs, IN

Jun 11
Spencerville, IN

View all listings

Ashley River Lumber Co., Inc.

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704

449 Campbell Thickett Road
Ridgeville, SC 29472

Thursday Sep 16, 2021 Completed

There is a 13% buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. (additional 2% CC fee will be charged for CC payments). All items are pick-up only. Smalls must be removed within 2 days. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.

Bidder Terms and Conditions

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.

Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:

IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .

Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

Auction Conducted in the State of Indiana.

1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.

Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction.

Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.

No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.

Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:

1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.

1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.

1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.

1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.

1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.

1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.

1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.

1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.

1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,

1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.

1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.

1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.

1. Online Bids. Online bids may not be reduced or retracted.

Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.

Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.

Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.

Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.

Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.

All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.

Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.

Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.

Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or

representation by Auctioneer

Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.

Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.

Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.

All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.

Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.

Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.

Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.

Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.

Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.

No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.

Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.

Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.

Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled

to specific performance or other equitable relief.

Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.

Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.

Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.

Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.

Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.

Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.

Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

Listing Details
After almost 70 years in operation Ashley River Lumber Company is changing gears and selling At Absolute Auction on Thursday September 16, 2020: Complete logging operation to include but not limited to: TigerCat 718 Feller Buncher, TigerCAT 610E Grapple Skidder, TigerCat 240B knuckleboom Loader, (2) JD 548 trailers, service trucks, Sawmill and Shavings Operation to Include but not limited to: (2) Baker Sawmills with Brewco Grade Resaw, Planing and finishing equipment for rustic slab tables and mantles Hutto Wood Shavings Mill Complete, over 1000 slabs of live edge slabs, and much more 1 Information Lot After almost 70 years in operation Ashley River Lumber Company is changing gears and selling At Absolute Auction on Thursday September 16, 2020: Complete logging operation to include but not limited to: TigerCat 718 Feller Buncher, TigerCAT 610E Grapple Skidder, TigerCat 240B knuckleboom Loader, (2) JD 548 trailers, service trucks, Sawmill and Shavings Operation to Include but not limited to: (2) Baker Sawmills with Brewco Grade Resaw, Planing and finishing equipment for rustic slab tables and mantles Hutto Wood Shavings Mill Complete! and much more 2 Custom Wood Slab Processing From Wood to Finish -2019 Baker Model LQ72 Horizontal Band Mill Custom Design, 50 HP Head Saw, Break, Hydraulic Strain, Model BBS-O-"LQ-72", S/N 19-964, (4) Dogs, 30' Bed, Sawyer's Console Controls & Setworks, Includes 5 HP Hydraulic Power Pack, Motor Controls, 3-Phase, Dust Removal: 50" x 14" W Split Level Box Chain Conveyor W/ 81X Paddle Chain, Shaft Mount Gear Reduction Drive & 7.5 HP Motor, Incline Stacking Conveyor - Loyal 35' x 14" Wide Paddle Chain Stacking Conveyor W/ Gear Motor Drive, Bottom Ware Plate, 24" Sterling Dust/Shavings Collector Fan, Model IIMS W/ Approx. 10 HP Motor & Cyclone Collector -Oliver Strait-O-Plane Roughing Planer Model 170, S/N 96386, Super Nice & Good Working Condition, Newman Helical Planer Heads W/ New Carbide Tips, 50 HP Top, 25 Hp Bottom, One Complete Set of Used Carbide Tips, (3) 10' x 24" Adjustable Height Gravity Roll Cases -Tannewitz Band Saw Wide Cut for Thick and Wide Live Edge Slabs W/ Brake Newly Rewound Motor -Dewalt Radial Arm Saw 30", 5 HP, 220/440V 3 Ph -Wood Wiz Leveler by Baker Model CX6, S/N 1129, 5" Dia. Head W/ Table 6' x 17' x 8" Thick Capacity, Planer Head/Sanding Head & Edge Jointer Bit -Wood Clamps, Rolling Material Handling Table every style & size you can image, Rolling Material Handling Table for easy transfer of Slab Pieces -Ingersoll Rand Air Compressor Vertical Tank Mount Model # 2340, S/N NAR10184973 W/ Air Reserve Tank and Inline Air Dryer -Kundig Top Sander Wide Belt 48" W/ Various Grit of Sand Paper on Hand -Oliver Jointer Model 166 LD, 30" Wide, S/N 50084 -Misc. Chargeable Hand Tools Radial Chop Saw, accessories(Sprayers, needed for Completing) -Delta Table Saw -Vacutherm Vacupress Vacuum Dry Kiln W/ Small Diesel Fuel Boiler newly replaced membrane and hoses -8' x 8' x 40' Tall Reefer W/ Dehumidifier, Spray Foam Insulation, Lights, Exhaust Fans & updraft (Paint Booth) -8' x 9' x 48' Insulated Roofer Container(Utility), Very Controlled Environment for Epoxy Work -9' x 8' x 28' Kidron Storage Finished Good Climate Controlled See Links in Additional Description https://arlumber.com https://www.instagram.com/ashleyriverlumber/?hl=en 100 2019 Baker LQ72 Band Sawmill Model BBS-0"LQ-72", serial # 19-964, 72" x 30' logs, 36" bandwheels, 50 HP electric motor, late model with very little use, 1 1/2" x 334" bands 3 Slab Inventory that is Included See the photos and list added to this lot 100A New and Used Bands for Baker Approximately 30 new and 50 used, 1 1/2" x 334" bands 101 36" Double Surface Oliver Straitoplane Machine #107, serial #96386, spiral cutter heads, 50 HP on top cutter, 25 HP on bottom cutter, good condition, 6" capacity, has brand new teeth 101a carbide teeth for planer 3 full boxes approx 120 per box 1 big box of misc used teeth 101b Oliver strait-o-plane model 170 parts 102 Diehl Straight-line Ripsaw 10 HP electric motor, chain has wear 103 Porter Sliding Chopsaw Model 47-A-20, serial # 69-5186, 18" blade, 20' infeed/outfeed rolls, electric drive 103a air hose and reel Has quick disconnect 104 Single Head Brewco Resaw with Return* Model BEZCH, serial # BEZEO1367, 1" band, 20" bandwheels, 20 HP electric motor 104a new band blades for brewco ez cut 105 Gravity roll case* 24" x 10' x 33" high, adjustable legs 106 Gravity roll case 24" x 10' x 33" high, adjustable legs 107 Gravity feed roll 24" x 10' x 33" high, adjustable legs 108 Waste Chain Conveyor 14" x 60' with 7" sides, electric drive along side the baker saw 109 24" Sterling Dust Blower Electric drive Wsteel structure 110 60" Dust Cyclone . 111 Waste Chain Conveyor 19" x 34' with 7" sides, electric drive 112 Baker Wood Wizz Surfacer Model BWW"6X", serial # 17-021, 6' x 15' 6" capacity, up to 9" thick material, electric motor, in very good condition 113 Logosol 4-Sided Moulder #PH260, 10" x 16" capacity, includes blower and box of profiles 112A WoodWizz winch for loading and unloading large slabs Never used 114 Kundig Single Head Belt Sander* 43" belt, good condition 114A Gravity Rolls Steel plate 16" x 60" x 31" high, 2 pieces 115 12"-14" Delta Rockwell Tilting Arbor Saw . 116 24" Oliver Jointer Machine # 166-ED, serial # 50084, 10 HP electric motor 116A Oliver Jointer for Blades On Straightoplane 1/2 HP grinder for planer 116B * Oliver jointer sharpner Head mount 117 Gravity feed roll 24" x 10' x 33" high, adjustable legs 117a Stretcher roll for small bands Includes personnel fan. 118 Tannewitz 24" Bandsaw* Model GH, serial # 78134, 7 1/2 HP electric drive motor, 2 1/4" x 36" bandwheels 119 DeWalt Radial Arm Saw 14" blade, 5 HP electric drive, 3 phase 124A Steel Building beside Hoop Building 40' x 160' with 16' eves, roof only, no sides, rated to withstand winds up to 120 mph 120 Ingersoll Rand Air Compressor Model 2340, serial # NAR10184973, 5 HP electric motor, 60 gallon vertical tank 121 Vertical Air Tank 32" x 72" tank 122 Dongan Transformer . 123 Square D Transformer . 124 Hoop Building 45' x 50', 2 man doors, 1 18' door, has new tarp still in box 124B Steel Building behind Hoop Building 45' x 50' with 16' eves, roof only, no sides, rated to withstand winds up to 120 mph 124C Kiln Direct Lumber Kiln Inside measurements are 11'6" x 27' x 12' high, LP furnace, in like new condition 125 Spray Booth 48' van trailer converted to spray booth, has lights, A/C, etc. nice setup 126 Brewco B-1600 The Wolf Run Around Resaw System Serial # BBFO22, 16" capacity, complete run around system, 40 HP electric motor, run around is hydraulic drive, 18' x 40' overall dimensions, 2" x 244" bands 126a * brewco 1600 parts Set of crowned wheels. Feed chain and end feed sprocket. Hydraulic motors; serves guides. New 2" blades 127 40 HP Hydraulic Pack Was used for runaround 128 4 Strand Transfer Deck 12' x 16' x 36" high, hydraulic drive 129 Dead Rolls 3' x 14' x 90" high, 8" x 30" rolls, 36" roll spacing, 2 7/16" shaft 130 4 Strand Transfer Deck 9' x 12' x 40" high, hydraulic drive 131 10 HP Hydraulic Pack Was used for decks 132 4 Strand Transfer Deck 7' x 10' x 30" high, hydraulic drive, missing 1 chain 133 Brewco B-4840 Grade Edger Model BGBE, serial # BWD436, 16" blades, 8' infeed, 6' x 26' tailing belt, laser system, 5 HP hydraulic pack 134 Roll Case 40" x 50', 8 1/2" x 30" rolls, 42" roll spacing, 2 1/2" shaft, electric drive 135 Belt Conveyor 27" x 30' x 36" high, 20" belt (needs replaced), hydraulic drive 136 4 Strand Transfer Deck 12' 4" x 24' x 34" high, electric drive, H-130 rooftop chain 137 4 Strand Transfer Deck 12'4" x 12', electric drive 138 Newman K-2S Trim Saw 80" x 30', 24" blades, electric 139 Outfeed from Trim Saw 11' x 12', electric drive 140 Barnsweep under Brewco 48" x 25', electric drive 141 Waste Conveyor 25" x 75' with 12" sides, electric drive 142 Waste Conveyor on Incline 25" x 36' with 12" sides, electric drive 147 Steel Building 50' x 140', 18' sidewalls, roof only, open sides, rated to withstand winds up to 120 mph 143 Waste Conveyor 32" x 150' with 12" sides, electric drive 148 Steel Building 25' x 44', 16' sidewalls, 36" man door, has divider wall, roof is insulated but not sides, 1-18' roll up door, 1-12' roll up door, rated to withstand winds up to 120 mph 144 Waste Belt 30" x 40', 16" belt, 12" sides, electric drive 145 Quincy Compressor Model QTH-120AMPRO, 10 HP electric motor, 120 gallon horizontal tank 145A Electrical Boxes and Transformer In building with Brewco 146 Steel Structure and Catwalk in Building with Brewco Includes frame that scragg mill used to sit on. 149 Vacutherm Model 500, serial # 06-502-8, 4' x 18' pan, diesel boiler, good condition 150 Go Fast Manual Chop Saw 80" infeed, 60" outfeed, 28" blade, electric motor 151 Holtec Pack Saw 60" cutting capacity, 25' infeed with lift arms, 21' outfeed, 15 HP electric motor, includes hydraulic pack 152 Waste Conveyor under Pack Saw 30" x 18' with additional 18' on incline, 30" belt, 12" sides, electric drive 153 Precision Chipper Chipper size 66-18, serial # 6-2588, no drive, rough condition 153a * 2 pallets of parts for precision chipper Fits lot 153. Knives. Babbitt pot ladles counter knives fans ect. 154 Lincoln Electric Motor 400 HP, 1780 RPM, frame 449T 154A Electrical under Chipper Soft start, main cutoff. 155 Precision Vibrating Conveyor 37" x 20', 24" pan, electric drive, infeed for chipper, does not include fiberglass section 156 Fiberglass Section and MDI XR-300 Metal Detector 24" pan x 60", has a few cracks 157 Chain Conveyor under Chipper 22" x 36' with 14" chain, electric drive 158 Precision Chip Screen Serial # S-1927, 10' x 10', electric drive 159 Chain Conveyor 18" x 26', paddle chain, electric drive 160 Chain Conveyor 10" x 38', paddle chain, no drive 161 Phelps 2 Van Chip Blower 20 HP electric motor 162 Baker Super Streak Band Sawmill Model BBS-0"3650E", serial # 13-721, up to 30' logs, chain turners, 90" off bearer belt, includes hydraulic pack, 1 1/4" x 36" bandwheels, 1 1/2" x 240" bands 162a * pallet of parts for Baker 3650 band mill 162b * Baker parts 3650 Band wheel Sheave and center main bearings. 162c * Baker 3650 band mill parts Full pallet 162d * baker 3650 band mill blades 1 pallet 163 Baker 4 Strand Log Deck with Stop and Load 16' x 20' 6" x 74" high, hydraulic drive 164 Barnsweep underneath Baker 48" x 36', hydraulic drive 165 Waste Conveyor 18" x 40', hydraulic drive, paddle chain 166 Ingersoll Rand Air Compressor Model 2545, serial # 1139425, 120 gallon vertical tank, electric motor 167 Wood-Mizer Single Head Resaw Model SHR, serial # SHR25-HD1204100200A1.05, 10' infeed and outfeed, 25 HP electric motor, 1 1/2" bands, 24" bandwheels, 10" x 10" capacity, 1 1/2" x 158" bands 167a * lot of blades for Woodmizer SHR 167b * slat feed chain Slat chain for resaw feed chain 81x chain 168 Meadows 3 Blade Edger Serial # 36D-1936-17, 16" blades, 4" x 36" capacity, feed rolls are worn, built in dust discharge blower, includes lasers, 2 moveable blades, 8' infeed and 8' outfeed clean and in good condition. 40 HP motor 169 Skate Roller 48" x 15' x 32" high 170 HWP Tilting Roll Case 40" x 20' x 54" high, 6" x 31" rolls, 16" roll spacing, 1 7/16" shaft, hydraulic drive 171 HWP Tilting Roll Case 40" x 10' x 54" high, 6" x 31" rolls, 16" roll spacing, 1 7/16" shaft, hydraulic drive 172 20 HP Hydraulic Pack Was used for tilting roll cases. 173 Roll Case with Kickoffs 32" x 35' x 58" high, hydraulic drive, 6" x 24" rolls, 25"-33" roll spacing 174 Baker 4 Strand Transfer Deck 16' x 16' x 36" high, hydraulic drive 175 5 HP Hydraulic Pack . 176 Pipers Saw Shop Chipper Knife Grinder Electric drive. 48" Bed 177 Wood-Mizer Band Sharpener Model LTAGAP-UM, serial # LTAGA/450/2012, electric drive 178 Wood-Mizer BMT200/250 Dual Tooth Setter . 179 Shipping Container set up as Sharpening Room 8' x 40', fully wired 180 HWP Shaving Machine 36" x 59" infeed box, 50 HP electric motor, 40 HP hydraulic pack, includes conveyor underneath, good working condition 181 HWP Log Deck 6' x 21', hydraulic drive, needs work 182 Paddle Chain Conveyor 20" x 25' with 9" sides, hydraulic drive 182A Holtec Transcut II #96226, 60" max cutting capacity, 3 phase electric motor 183 Yates-American A20 4 Sided Planer Matcher 15" wide, no drive, belt driven. Includes Infeed Table w/ (8) knife heads - top & bottom profile, 6 knife side heads belt driven, 20' pineapple feed table 183a Planer knives For Yates American 183B Transfer Deck* 3-strand, 4-strand, 183C Belt Conveyor* 12" belt, electric drive, 22' long 183D Green Chain* 3-strand, electric drive, 24' long 184 Lincoln Electric Motor 100 HP, 1775 RPM, frame 404T 185 Tooling for Yates A20 Planer 2" arbor 186 Tooling for Yates A20 Planer 2" arbor 187 Tooling for Yates A20 Planer 2" arbor 188 Tooling for Yates American A20 Planer 2" arbor 189 Tooling for Yates A20 Planer 2" arbor 190 Tooling for Yates A20 Planer 2" arbor 191 Parts for Yates A20 Planer . 192 Belt Drive Shaft . 192A Side Head Grinder* W/side head bits and wrenches, for A20 Planer, 193 Pulley Assembly For Yates Planer . 194 48" Dust Blower 50 HP electric motor 195 Mettler Toledo Scales Model LYNX, serial # 5521261-5DH, 12' x 75' 196 2000 Gallon Fuel Tank With Fill Hose 197 2000 Gallon Fuel Tank With Fill Hose 198 Fuel Tank 199 Fuel Tank 200 Fuel Tank Was used for hydraulic oil 300 2016 Tigercat 610E Grapple Skidder Serial # 6101154, enclosed cab, joystick, winch, heat & A/C, came straight out of the woods, was being used daily, good working condition. 3980 on the hour meter. 301 John Deere 548G Grapple Skidder PIN DW548GX577880, winch, open cab, meter reads 11,061 hrs. this was the backup machine so hasn't been used much in the last 3 years, works good 301A Skidder Grapple* Rough condition 302 Tigercat 718 Feller Buncher Serial # 7180607, just came out of woods, good working condition, the one door is bent but will try to have fixed by auction time, watch for updates. 303 Tigercat 240B Knuckleboom On Pitts trailer, enclosed cab, delimber, continuous swivel grapple, bucksaw hookups, came straight out of the woods, was being used daily, good working condition 304 Prentice 410E Knuckleboom Serial # E410PR60838, on trailer, enclosed cab, joystick, CTR Delimber, bucksaw hookup, continuous swivel grapple, Cummins Diesel engine, meter shows 1406 hours, has hydraulic leaks, was used being used daily, good working condition, one owner 305 CSI Bucksaw DL-4400 Classic, 50" bar, 73" x 25' 5" deck, lever controls, was used wit lot # 304 305A CSI Bucksaw 60" bar, 20' bunk 305AA Prentice 4100 Track Knuckleboom Model 3306, serial # 64732937, full cab, Cat Diesel engine, hours unknown, has some hydraulic leaks, lever controls, continuous swivel grapple, starter button is busted so needs to be hot wired to start, this machine is still being used daily, good working condition, 150" wide 306 410B Prentice Knuckleboom Serial # CP555-A-408, meter shows 794 hours, trailer is cut off, needs work or for parts only, enclosed cab 307 Volvo L90F Wheel Loader PIN L90FV68400, engine model DE6-LAE3, 160 HP, 5.7 L, full cab, heat and A/C, meter shows 12,141 hours, 4 speed, good working condition, does not include any attachments 308 Volvo L90E Wheel Loader PIN L90EV67825, engine model D6D-LAE2, 160 HP, 5.7 L full cab, heat and A/C, meter shows 5355 hours, 4 speed, good working condition, does not include any attachments 308A Sellick S80 Forklift Model S80, serial # 6199508582, 8000 pound lift, 3 stage mast, side shift, 2WD meter shows 6423 hours, good working condition, this lift will be retained for 3 weeks for loadout. Buyer will be able to pick up on October 7th 308B Cat LP Forklift Meter reads 1673 hrs. 2 stage mast, side shift, includes tank, works good 309 International S1900 Dump Truck Model 1954, VIN 1HTLDUXPXEHA24431, Eaton Transmission, meter shows 274,597 miles, was used as a yard truck, runs and operates 310 1989 Ford L8000 Dump Truck VIN 1FDYU82A3KVA53157, GVWR 53,100 pounds, meter shows 72,920 miles, was used as a yard truck, runs and operates, need to file for lost title. 311 1995 International 4900 Truck, VIN # 1HTSDAAN5SH605894 Year: 1995 Make: International Model: 4900 Vehicle Type: Truck Mileage: Plate: Body Type: Trim Level: Drive Line: 4x2 Engine Type: L6, 7.6L (466 CID) Fuel Type: Diesel Horsepower: Transmission: VIN #: 1HTSDAAN5SH605894 Features and Notes: meter shows 44,244 miles, works good, Barko loader sells separate, 1st lot of an entirety 311A Barko 80 Knuckleboom Model 5222, serial # 119522260006, extendable boom, with hydraulic power pack, very low hours, in excellent condition 311B Entirety Lot 311 & 311A With 10% raise 312 2002 Freightliner FL70 Crane Truck, VIN # 1FVABUAK42HK95912, Year: 2002 Make: Freightliner Model: FL70 Vehicle Type: Truck Mileage: Plate: Body Type: Trim Level: Drive Line: 4x2 Engine Type: L6, 7.2L (439 CID) Fuel Type: Diesel Horsepower: Transmission: VIN #: 1FVABUAK42HK95912 Features and Notes: GVWR 35,000 with Altec winch/Crane, 45' reach, meter shows 25,291 miles, 7434 hours, fully retractable, 30,000 pounds lift, fully extended 14,980 pounds, mon winch pull cap, 20,000 pounds, Cat Diesel engine, runs and operates, needs to file for lost title. 313 2007 Ford F-750 Truck, VIN # 3FRWF75T47V517861 Year: 2007 Make: Ford Model: F-750 Vehicle Type: Truck Mileage: Plate: Body Type: Regular Cab Trim Level: Drive Line: 4x2; Dual Rear Wheels Engine Type: L6, 7.2L Fuel Type: Diesel Horsepower: Transmission: VIN #: 3FRWF75T47V517861 Features and Notes: meter shows 41,497 miles, automatic transmission, heat and A/C, bed measures 92" x 14', 7.2L Cat Diesel engine, gooseneck hitch, works good 314 2003 International 9200i Truck, VIN # 2HSCEASR33C072489 Year: 2003 Make: International Model: 9200i Vehicle Type: Truck Mileage: Plate: Body Type: Trim Level: Drive Line: 6x4 Engine Type: L6, 14.6L (893 CID) Fuel Type: Diesel Horsepower: Transmission: VIN #: 2HSCEASR33C072489 Features and Notes: 475 HP Cat engine serial MBNO2528, GVWR 52,000, meter shows 1,155,906 miles, was used as a yard truck the last 4 years, runs and operates 315 2006 GMC C6500 Chip Truck, VIN # 1GDJ6C1G66F410643 Year: 2006 Make: GMC Model: C6500 Vehicle Type: Truck Mileage: Plate: Body Type: Conventional Cab & Chassis Trim Level: Drive Line: 4x2 Engine Type: V8, 8.1L; MFI Fuel Type: Gasoline Horsepower: Transmission: VIN #: 1GDJ6C1G66F410643 Features and Notes: 6 speed, used for tree trimming service, no front bumper, door handles on outside don't work 316 2008 Ford F-350 Pickup Truck, VIN # 1FTSX31538EE36520 Year: 2008 Make: Ford Model: F-350 Vehicle Type: Pickup Truck Mileage: 180,900 Plate: Body Type: 4 Door Cab; Super Cab Trim Level: XL; XLT; Lariat Drive Line: 4WD Engine Type: V8, 5.4L; SOHC Fuel Type: Gasoline Horsepower: 250-300HP Transmission: VIN #: 1FTSX31538EE36520 Features and Notes: Good working truck 317 2003 Ford F-150 Pickup Truck, VIN # 1FTRW07L33KB71307 Year: 2003 Make: Ford Model: F-150 Vehicle Type: Pickup Truck Mileage: Plate: Body Type: 4 Door Cab; Super Crew Trim Level: XLT; Lariat; King Ranch; Harley-Davidson Drive Line: RWD Engine Type: V8, 5.4L (330 CID); SOHC 16V; EFI Fuel Type: Gasoline Horsepower: 235-260HP Transmission: VIN #: 1FTRW07L33KB71307 Features and Notes: meter shows 165,918 miles, crew cab, Triton V8 engine 318 Tiger Special 6640 Tractor Enclosed cab, meter shows 2585 hours, PTO, engine runs, but needs clutch 319 2007 Electric Golf Car VIN SHAQ0728778001, club car, rear seat, built in charger 334 1993 Strick Van Trailer VIN 1S12E848XPE362384, box only, GVWR 65,000 pounds, 48' long, 102" wide, 119" sides 320 40' Genstar Chip Trailer 96" wide, 100" sides, good title and road ready 321 40' Chip Trailer 96" wide, 100" sides, good title and road ready 322 2000 ITI Open Top Chip Trailer VIN 1Z92A4328YT029276, model SDS-A3, GVWR 29,484, 42' x 94" x 106" sides, good title and road ready 323 40' Genstar Open Top Chip Trailer 96" wide, 96" sides, with tarp cover, good condition, good title and road ready 324 1995 40' Peerless Chip Trailer VIN 1PLE04229SPc18253, 94" wide x 109" sides, open top, good condition, good title and road ready 325 40' Open Top Chip Trailer 96" wide, 100" sides, good title and road ready 326 40' Maersk Open Top Chip Trailer 96" wide, 96" sides, with tarp cover, good title and road ready 326A Tri-Axle Equipment Trailer With Ramps 25' deck, hydraulic ramps, has self contained hydraulic unit. No Title 327 Equipment Trailer 48' overall, main deck 25', upper deck 115", 48" flip up ramps, good title and road ready 328 Equipment Trailer 34' overall, deck 246", 102" wide, pintle hitch, 72" flip up ramps, good title and road ready 329 1995 Pitts Lag Trailer Model LT-42-4, serial # LT42T35P950271, GVW 84,000, good title and road ready 330 42' AMC Log Trailer Good condition, good title and road ready 331 40' Log Trailer Flat bed with log bunks, 96" wide, good title and road ready 331A 40' Log Trailer Rough condition 337 Contents inside off Lot 336 Electrical boxes and wires 331B 48' Strick Van Trailers* Includes all content, Used for a chain saw shop, fully wired , No Axles, No title, 3- Chain saw grinders , oregon brand, 15- 3/4" deck saw chain, 24- 3/8 for 20" bar chains, 3-ctr bars for bunk saws, 332 40' Triton Chip Box 96" wide, 96" sides, open top, box only 333 40' ITEL Storage Container Serial # 733603, 96" wide, 108" sides 335 Steel Storage Container 20' long 96" wide, 101" sides, rough condition 336 Steel Storage Container 20' long 96" wide, 101" sides 336A Trailer Frame* Approx 42' , no axles 338 FMC Logging Skidder Complete but does not run 339 Allis Chalmers 7G Track Front End Loader Was running but weak power. Not cranked in couple years 340 Windham All Terrain Forklift Complete, motor blew gasket and is not running 341 Hydro-Tec Steam Pressure Washer Was bought in working condition but never used 372 Loader Forks 373 113" Loader Bucket Quick attach 374 115" Loader Bucket Quick attach 375 Loader Forks 60" forks, 3 5/8" hole, 7" wide 376 Quick Attach Loader Forks 88" forks, 25 1/2" from center of bottom pin to top of top pin, 40" center to center 377 110" Bucket Rough condition 378 Cat 3 In 1 Skid Steer Bucket 70", Needs new hydraulic hoses 379 Cat Loader Bucket 100", 2.4 yard bold on cutting edge 380 Cat Loader Bucket 100", approximately 2.75 yard bolt on cutting edge 381 Loader Forks 5" wide, 48" long, 3 1/4" hole 382 Loader Forks 53" forks, quick attach 383 Dual Cylinder 9' Loader Rake Serial # 29116ASH007, special VOLVO L90, quick attach 384 Extendaboom with Fork Pockets 36' reach, fork pockets are 4" x 6 1/2" 385 Quick Attach Loader Forks 50" forks, 64" wide 386 Quick Attach Loader Forks 56" forks, 80" wide 387 Quick Attach Bucket with Removable Forks 3 in 1 bucket, 94" wide, 42" forks 388 Quick Attach Grapple 90" wide, 58" forks 389 Quick Attach Grapple 64" wide, 53" forks 390 Wicker Quick Attach Grapple Model WEQL110E, serial # 13254, 88" wide, 54" forks 390A 14' Grader for Loader Fork pockets are 69" apart 391 Skid of Hubs 5 total Various growser teeth pieces 392 8 Chain Binders . 393 Skid of Wire Protectors . 394 Skid of Logging Safety Signs and Cones . 395 Loader Seat and Transmission . 396 Hydraulic Cylinders 56", 3" mounting hole, 3 smaller ones 397 4 Skids of Fans for Dry Kilns . 398 Tiger Boom Flail Serial # TBF-0525HP, 50" flail, hydraulic oil tank 399 60" mower Hydraulic motor 400 7' Marden Stalk Chopper Model SHLA36, serial # 99-92, needs new wheel 401 Woods Bat-Wing Mower Model 9318, serial # 661350, 15' overall, PTO drive 402 72" Dust Cyclone 13" round inlet, 24" round outlet 403 Mellott Drop Belt 40" x 15', up to 24" belt, no drive, air cylinder 404 Roto Flow Chip Screen Model BS-66, serial # 6-63-12, 1 7/8" screen, 6' x 6', electric drive 405 36" NYB Dust Blower No drive 406 Fuel Tank 64" x 144" 407 48" Mellott Chain Turner Hydraulic drive 408 15 HP Mellott Hydraulic Pack . 409 100 HP Hydraulic Pack . 410 Sumitomo Gear Box Model CHHS-6195Y-R2-43, serial # IL0119443, 1750 RPM 411 Swing Chop Saw 5 HP electric motor 412 24" Dust Blower No drive 412A Lumber Rack* 47" X 80" X 42" , Fork Pocket 413 3 Strand Log Deck 128" x 15' x 80" high, electric drive 414 3 Strand Transfer Deck 10' x 23', hydraulic drive 415 Loading Arms 102" x 128" 416 112" John Deere Blade 3 point attach 417 Sockets, Gaskets, Cant Hooks, Etc. 3/4" drive socket set 417A Steel Shafts and Pipe 2"-5" diameter 417B Drain Pipe 8" x 16'. 7 pieces 418 Dead Rolls 18" x 20' x 34" high, 2 1/2" x 14 1/2" rolls 418a * flat belt conveyor With tensioner. 15' x 26". No belt or drive. Includes skate roll section included 419 Yates Bandsaw #53590, 44" bandwheels, 5" bands, 40 HP electric motor 420 Dead Rolls 65" x 191", 6 1/2" x 60" rolls, 27" roll spacing 421 36" Chip Blower 15 HP electric motor 422 CM & E Norman Chipper Model 48, 8 knife, for parts or to rebuilt, no drive 423 Hourglass Rollcase 50" x 28' x 44" high, 17" x 36" rolls, 30" roll spacing, 2 1/2" shaft, no drive 424 Hourglass Rollcase 50" x 15' x 44" high, 17" x 36" rolls, 30" roll spacing, 2 1/2" shaft, hydraulic drive 425 Lightning 480 Resaw #134424 426 36" Dust Blower 20 HP electric motor 427 4 Strand Transfer Deck 128" x 17' x 8' high, has steel slide off 428 36" Catwalk and Structure . 429 CTR Bucksaw Model CTR50-1A, serial # 50-123, 9' bunk 430 2-Lift RMS 63" X 100" 431 1/2 Ton Dayton Hoist System . 432 Log Splitter Up to 6' logs, 10 HP electric motor 432A Loader Tires 20.5 R25 432B Live Roll Case* No drive, 48" X 6' 6" 433 Chop Saw 12' infeed, 9' outfeed, electric motor, 30" blade, air cylinders 433A Shop Built Upcut Saw 20" blade, 10 hp direct drive electric motor, 13' infeed, air operated kicker and saw 434 Drive Shaft 2 1/2" x 26' 435 Gardner Denver Air Compressor 40 HP electric motor, meter reads 46,637 hours 436 Round Fuel Tank 42" x 94" 437 Lumber Cart 56" x 57 1/2", steel wheels, 50 1/2" center to center of wheels 437A Lumber Cart 56" x 57 1/2", steel wheels, 50 1/2" center to center of wheels 437B Lumber Cart 56" x 57 1/2", steel wheels, 50 1/2" center to center of wheels 437C Lumber Cart 56" x 57 1/2", steel wheels, 50 1/2" center to center of wheels 437D Lumber Cart 56" x 57 1/2", steel wheels, 50 1/2" center to center of wheels 437E Lumber Cart 56" x 57 1/2", steel wheels, 50 1/2" center to center of wheels 438 Dust Collector 4- 22" outlets on bottom 438A Tires* 325/65R18, 275/65R18 438B Tires* Variety of sizes 438C Tires* Variety of sizes 438D Tires* Variety of sizes, 231/2" , 10 lug 438E Tires* Variety of Sizes, 25" rims , 10 lug 438F Cat Walk* 25" X 12' w/ 2 steps, Stairs 19 steps 20' long 438G Steel Frame* 20' X 53" high 438H Steel Frame* 12' high 439 Grader Wheels 14.00-24 tires, set of 4 440 North Star Power Washer and Air Compressor on Trailer Approximately 250 gallon water tank, Honda motor on both units 623 Kiln Dried Live Edge Slabs 5 pine 32"-40" x 12', 7 red oak 12"-18" x 12', 21 gum 16"-24" x 12', 8 white oak 18"-24" x 12', 8 sycamore 16"-20" x 12', 49 total, labeled Shed 4 441 Overhead Crane on Wheels 8' x 12' x 14' high 442 Frame and Axles . 443 Frame and Axles . 444 Frame and Single Axle 445 Asbury Multi-Purpose Bucket Model M125B, 3 1/2 yard, 10' wide 445A Rims* 34 1/2" dia, 32" wide, set of 4, 10 lug 445B Knuckleboom Grapple* . 445C Trash Bin* 48" X 72" X 49" deep, w/flip out door, Fork pockets 445D Trash Bin* 48" X 76" X 49" , W/flip out door, fork pockets 445E Self Dumping Hopper* Bes-pac, model SDH, Ser# 105487, 60" X 72" 446 Drain Pipe 8"-20" x 16' long 447 PVC Drain Pipe 8"-20' long 447A Pallet of Plumbing Parts* Couplers, etc. 448 115" Loader Bucket . 449 Pallet of Starters 450 Signumat split stopper hammer and clips 451 Signumat wood barcode hammer and couple hundred barcode clips 452 GEM sander / polisher Lots of extra sander paper for it and buffer rags 453 GEM sander buffer & extras 454 Uattend time clock system works with online website 455 Metal Pallet Cages 6 per lot 456 Metal Pallet Cages 6 per lot 457 Metal Pallet Cages 6 per lot 458 Metal Pallet Cages 6 per lot 600 Kiln Dried Live Edge Slabs* 22 pine 22"-34" x 12', 18 pine 16"-24" x 12', 14 pine 18"-24" x 12', 10 pine 16"-22" x 12', 12 pine 14"-20" x 12', 76 total, labeled 4A 601 Kiln Dried Live Edge Slabs 20 pine 20"-26" x 12', 14 pine 21"-36" x 12', 10 pine 21"-30" x 12', 10 pine 12"-24" x 12', 4 maple 12"-24" x 12', 12 pignut hickory 12"-18" x 12', 5 pecan 18"-39" x 12', 75 total, labeled 3A 602 Kiln Dried Live Edge Slabs 22 cypress 13"-37" x 12', 4 cypress 22"-26" x 12', 6 hickory 12"-21" x 12', 6 sycamore 16"-20" x 12', 6 cherry 12"-16" x 12', 1 live oak crotch 24"-40" x 12' (middle bad, only ends are good), 4 oak crotch 24"-40" x 10', 2 maple 18"-24" x 10', 2 cypress 16"-20" x 12', 53 total, labeled 2A 603 Kiln Dried Live Edge Slabs 5 white oak crotch 22"-40" x 12', 1 live oak 28"-34" x 8', 1 pine 22"-27" x 10', 4 white oak 18"-24" x 8' (crotch), 2 red oak 19"-29" x 8', 1 walnut 24" x 3' (thick) , labeled 1A 604 Kiln Dried Live Edge Slabs 6 oak 16"20" x 10', 6 pine 12"-18" x 12', 7 beech 12"-22" x 10', 4 sycamore 12"-18" x 10', 1 hickory 18" x 10', 2 white oak 14"-21" x 12', 10 pine 21"-24" x 12', 4 sap gum 19"-21" x 12', 2 sycamore 18"-24" x 8', 3 cherry 12" x 12', 8 red oak 2" x 8" and 10's x 12', 4 pignut hickory 8"-20" x 10', 3 maple 16"-20" x 10', 60 total, labeled 2B 605 Kiln Dried Live Edge Slabs 18 cypress 12"-18" x 12', 5 hickory 17"-24" x 10', 5 maple 16"-19" x 10', 2 pecan 18"-20" x 10', 30 total, labeled 1B 606 Kiln Dried Live Edge Slabs 4 spalted ash 14"-19" x 12', 4 pine 36" x 11' (thick), 4 spalted white oak 28"-34" x 11', 5 pine 27"-42" x 11', 1 red oak 24"-50" x 9', 18 total, labeled 1E 607 Kiln Dried Live Edge Slabs 10 maple 56"-60" x 60", labeled 1C 608 Kiln Dried Live Edge Slabs 11 sycamore 20"-30" x 12', 2 maple 12"-24" x 12', 4 pine 12"-18" x 12', 6 live oak 12"20" x 10', 3 sycamore 24"-30" x 12', 33 total, labeled 1D 609 Kiln Dried Live Edge Slabs 14 sycamore 10"-18" x 16', 8 hickory 10"-18" x 16', 4 pine 22"-26" x 16', 6 pine 14"-22" x 16', 5 crap oak boards, 1 hickory 12"-16" x 16', 2 white oak 3 x 11 x 16' beams, 1 pine 16"-18" x 16', 1 poplar 18" x 20" x 16', 2 hickory 18"-20" x 12', 4 sycamore 12"-20" x 16', 1 poplar 16"-18" x 16', 1 cypress 18"-20" x 16', 3 spalted red oak 20"-22" x 16', 4 spalted poplar 30"-36" x 16', 57 total, labeled 3E 610 Kiln Dried Live Edge Slabs 12 poplar 16"-32" x 16', 7 sycamore 16"-28" x 16', 6 poplar 12"-28" x 16', 18 cedar 9"-18" x 16', 2 oaks 17"-28" x 14', 2 hickory 12"-16" x 16', 6 spalted hickory 10"-18" x 14', 2 maple 16"-20" x 16', 6 ash 12"-20" x 16', 5 ash 10" x 16" x 16', 1 white oak 22"-24" x 16', 69 total, labeled 2E 611 Kiln Dried Live Edge Slabs 4 red oak 34"-40" x 7', 3 live oak 24" x 31" x 5' (thick), 9 walnut 20"-30" x 5' (crotch), 2 live oak 24"-27" x 5', 18 total, labeled 1F 612 Kiln Dried Live Edge Slabs 6 maple 40"-57" x 9', 4 live oak 26"-48" x 8', 4 maple 20"-36" x 7', 7 oak 21"-43" x 6', 21 total, labeled 2G 613 Kiln Dried Live Edge Slabs 4 red oak 32"-56" x 6', 4 live oak 20"-24" x 6', 1 red oak 36"-42" x 5', 3 red oak 22"-36" x 6', 2 live oak 15"-24" x 5', 14 total, labeled 1G 614 Kiln Dried Live Edge Slabs 25 poplar 3 x 6 x 8', 25 maple 3 x 6 x 8', 2 hickory 12"-22" x 8', 2 hickory 12"-18" x 8', 1 sinker heart cypress 24" x 8', 3 beech 2 x 10 x 7', 1 red oak 31" x 7', 1 ash 12" x 8', 1 sinker heart cypress 22" x 6', 1 walnut 24" - 40" x 6', 2 osage orange 22"-30" x 8', 3 ash 14"-19" x 8', 1 ash 12" x 8', 2 elm 18"-22" x 8', 5 red oak 14"-30" x 8', 3 white oak 12"-20" x 8', 78 total, labeled 4H 615 Kiln Dried Live Edge Slabs 3 live oak 34"-50" x 8', 6 white oak 14"-24" x 8', 6 white oak 12"-22" x 8', 6 maple 10"-18" x 8', 9 maple 12"-22" x 8', 4 cedar 12"-17" x 8', 7 maple 22"-36" x 8', 41 total, labeled 3H 616 Kiln Dried Live Edge Slabs 7 red oak 20"-24" x 8', 21 sinker heart pine 10"-15" x 7', 5 sinker pecky cypress 22"-27" x 7', 1 sinker pecky 24" x 5', 6 white oak 14"-24" x 8', 53 total, labeled 2H 617 Kiln Dried Live Edge Slabs 16 river birch 12"-19" x 9', 4 pine 12"-24" x 7', 6 pignut hickory 12"-21" x 8', 9 red oak 22"-49" x 7', 6 white oak 16"-28" x 7', 41 total, labeled 1H 618 Air Dried Mantels 44- 4"-8" thick x 8"-20" wide x 10 ' long mixed hardwood- oak, maple, hickory, gum, sycamore, ash, elm, 38- 4"-8" x 8"-18" wide x 8' long, same mixed hardwood, 82 total, labeled Mantels 1 619 Air Dried Mantels 3 cherry 6 x 6 x 8", 9 mixed oak, 2 pine 6 x 16 x 8', 3 sycamore 6"-10" x 8', 2 pine 12" x 20" x 8', total of 31, labeled Mantels 2 620 Kiln Dried Live Edge Slabs 5 pecan 24"-40" x 16', 34 maple and ash 12"-24" x 16', 39 total, labeled Shed 1 621 Kiln Dried Live Edge Slabs 7 white oak 16"-34" x 12', 1 red oak 20" x 12', 7 sinker heart pecky cypress 12"-18" x 12', 1 poplar 25" x 12', 11 pine 27"-42" x 12', 44 total, labeled Shed 2 622 Kiln Dried Live Edge Slabs 3 spalted maple 40"-47" x 12', 1 pine 34" x 12', 16 red cedar 14"-20" x 12', 11 pine 20"-30" x 12', 5 spalted maple 20"-28" x 12', 2 pine 18"-20" x 12', 1 cypress 16" x 12', 39 total, labeled Shed 3 622A Lumber Rack* 48" X 52" X 82" high, Fork Pockets 700 4 drawer file cabinets. Total of 12 behind hoop building 701 1 5 drawer and 2 lateral file cabinets behind hoop building 702 * pillow block taper lock bearings 1 pallet baker 3650 building 703 * maintenance tools Come a longs pipe wrenches energpac 704 * 2 pallets of drive v belts 705 * belting and tools Belt lacing. Lacing machine. Belt tighter belting 706 pallet of jockey grinders For headsaw and edger diamond wheel. Saw wrenches bit setter 707 aceyelyne hoses gauges welding rods Entire pallet 708 * pallet of solid tooth carbide tip saws Various diameter and arbor size. 709 * pallet of air cylinders and 1 hyd 710 pallet of misc Pulleys Babbitt filled bearings bushings sprockets 711 pallet of rods Keyway copper tube pipe wrench misc 712 * lot of steel banding. Clips and tool 713 * plastic strapping clamps 6 boxes. No strapping 714 polyester plastic strapping buckles and strapping tools Includes phosphated wire buckles. 6 boxes 14 boxes 2 coil box 3/4 inch. Includes 4 strapping tools 715 pallet of 81x chain 716 * 2 pallets of sprockets 1 large 1 small 717 * 1 pallet of roller chain. 718 * 1 pallet of roller chain 719 * pallet of roller drive chain Includes chain drags 720 * pallet of chain repair kits and more Pallet of roller chain and 81x. There are 2 pallets total in this lot 721 * 2 pallets of PQR size bushings 722 * pallet of R bushings . 723 * pallet of hydraulic cylinders 724 * box pallet of air parts Hoses. Directional valves filters cylinders 725 * lot of wood squares and 1/2 x 2 x 37 1/2 pieces 2 lots for 1. Baker 3650 building. 726 * 4’ stacking sticks as follows 45”. - 48” range 7 bins with contents 727 * new 5 bundles of 4’ stacking sticks All for one money 728 * 1 lot of 8 ‘ stacking sticks 729 loggibg tools Impact set radiator 730 logging parts Coolers and spool of cable 731 * logging parts Air hose lights 732 * logging parts Grease power packs. Mud flaps. And fuel tank 733 * 5” metal pipe tire tubes Firestone tire tubes. 9.0/10.00/16 734 * approx 27 alum. Crate 3 x 3 x 4. 735 * conveyor drive section with end sprocket section 736 * steel grating thread rod stick Weatherhead electrical entrance 737 * floursant light fixtures Approx 5 738 * Pendu 15” blower 5 hp 739 * cable pulley and steel section Includes 2 pallets. One with h 78 and RTR chain. 741 * chipper shroud steel 742 * lumber racking 4' x 10, package packing rack 743 * lumber racking 4' x 10, package packing rack 744 * 2 roll stand 747 Belt Conveyor* 20" X 35' 8" , no belt , no drive 748 Track & Frame* 60' track, 60" on center, 60' extra track, 749 Scrap Steel* I beams, Rods 750 Excel Gang Saw* Needs rebuilt 751 Vibrating Conveyor* 26" X 14' X 32" high, electric drive 752 3-Strand Log Deck* 12' X 30' X 100" high , no chain, no drive 758 Pallet of Misc* Benchtop Drill Press, electric drive, electric wire 759 Wrenches* 4" dust hose, sockets, etc 760 Nyle Dry Kiln System* Model L1200, Ser# 982297, Honeywell controls, inludes duct work 761 Pallet of Misc* Bolts, electric motors, Chain Hoist 762 Westair Drymatic* . 763 Westair Drymatic* Model Dac39a4/4 TS5, Ser# 391860, 3ph, 220 volts, Type R 22 764 Pentacryl Stabilizer* Green wood stabilizer, 5 gal, 5- full Containers, 765 Pallet of Hand Tools* Wrenches, grease guns, 40" 3/4 drive torque wrench, 766 Box of Misc* Tool box , bolts, etc 767 Pallet of Motors* 1/ hp, 2hp, 15hp 768 Pallet of Electric Motors* 5hp, 3hp, gear drives 769 Pallet of Nails* Variety of nails & screws 770 Pallet of electrical wire* . 771 Brand New Wood-Wiz Hand Winch* Straps, Pulleys 772 Grizzly Dust Collection* Model G0671, Ser# M161682, 4hp 773 Pallet of electrical parts* . 774 4 Ton Chain Hoist* . 775 Electrical Panels* . 776 * electrical entire pallet Starters push button. Fuses 777 2 pallets electrical Boxes motor controls 0-3 778 electrical connectors copper wire 1 pallet. 1 box of copper wire 779 * work table and drop cord 780 * electrical boxes and lights 2 pallets as marked 781 * 2 pallets. Motors. Electrical boxes 782 * propane lift cylinders Some fuel inside 783 * hobart handler 135 welder Includes helmets and rods 784 * show display package 2 tables and back drops 785 * pallet of fire extinguishers 786 * huge copper wire 2 pallets 787 * 3 x 4 roller table Good working height 788 Pallet of Nail guns* Paslode 789 Acme Transformer* No T3030K0023B, MODEL Doe2016 790 Air Compressor* Model Th5030, Ser# 70357, portable, 5hp honda, Westinghouse generator, Ryobi Radial Arm saw 790a Air compressor with Honda off of 790 791 Pallet of Misc* Oil sample kits, lug nuts 792 Metal Cart* 28" X 55" X 22" high, on casters 793 Pallet of Misc 794 * Table with contents Dewalt 2.5 gallon 135 psi electric air compressor. Two DEWALT FLEXVOLT 6AH BATTERIES. craftsman router Ryobi sawzall. Drills angle grinders skil saw desalt charging units 796 * roller table for slabs 2 space heaters, safety equipment, had casters first aide boxes 797 * Tri deck Steel clamps 798 * lumber tag inventory application. 799 * cleaning supplies Mop. Bucket. Broom hand waste pan 800 * North Star power washer Honda GC 190. Engine. 801 * saw horses Slab heavy duty saw hirses and table

Close X

Gallery Images Loading, Please Wait...

Close X

Save this sale to your Saved Sales list!

Your Saved Sales list is an easy way to return to sale listings which are of interest to you.

Login

Username:

Password:

Sign Up

FREE EMAIL NOTIFICATIONS
auction listings delivered to your inbox

Close X

Sign Up

FREE EMAIL NOTIFICATIONS
auction listings delivered to your inbox

Login

Username:

Password:

Return

Ashley River Lumber Co., Inc.

Live Auction

View Gallery (2000)

Auction Date(s)

Thursday Sep 16, 2021 Completed

Auction Location

Ridgeville, SC 29472

View Map

Company

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Website: brightstarauctions.com

Listing Terms and Conditions

There is a 13% buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. (additional 2% CC fee will be charged for CC payments). All items are pick-up only. Smalls must be removed within 2 days. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.

Bidder Terms and Conditions

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.

Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:

IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .

Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

Auction Conducted in the State of Indiana.

1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.

Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction.

Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.

No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.

Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:

1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.

1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.

1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.

1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.

1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.

1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.

1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.

1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.

1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,

1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.

1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.

1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.

1. Online Bids. Online bids may not be reduced or retracted.

Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.

Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.

Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.

Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.

Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.

All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.

Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.

Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.

Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or

representation by Auctioneer

Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.

Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.

Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.

All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.

Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.

Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.

Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.

Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.

Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.

No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.

Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.

Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.

Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled

to specific performance or other equitable relief.

Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.

Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.

Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.

Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.

Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.

Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.

Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

100

2019 Baker LQ72 Band Sawmill
Model BBS-0"LQ-72", serial # 19-964, 72" x 30' logs, 36" bandwheels, 50 HP electric motor, late model with very little use, 1 1/2" x 334" bands

Slab Inventory that is Included
See the photos and list added to this lot

100A

New and Used Bands for Baker
Approximately 30 new and 50 used, 1 1/2" x 334" bands

101

36" Double Surface Oliver Straitoplane
Machine #107, serial #96386, spiral cutter heads, 50 HP on top cutter, 25 HP on bottom cutter, good condition, 6" capacity, has brand new teeth

101a

*carbide teeth for planer
3 full boxes approx 120 per box 1 big box of misc used teeth

101b

* Oliver strait-o-plane model 170 parts

102

Diehl Straight-line Ripsaw
10 HP electric motor, chain has wear

103

Porter Sliding Chopsaw
Model 47-A-20, serial # 69-5186, 18" blade, 20' infeed/outfeed rolls, electric drive

103a

*air hose and reel
Has quick disconnect

104

Single Head Brewco Resaw with Return
Model BEZCH, serial # BEZEO1367, 1" band, 20" bandwheels, 20 HP electric motor

104a

*new band blades for brewco ez cut

105

Gravity roll case
24" x 10' x 33" high, adjustable legs

106

Gravity roll case
24" x 10' x 33" high, adjustable legs

107

Gravity feed roll
24" x 10' x 33" high, adjustable legs

108

Waste Chain Conveyor
14" x 60' with 7" sides, electric drive along side the baker saw

109

24" Sterling Dust Blower
Electric drive Wsteel structure

110

60" Dust Cyclone
.

111

Waste Chain Conveyor
19" x 34' with 7" sides, electric drive

112

Baker Wood Wizz Surfacer
Model BWW"6X", serial # 17-021, 6' x 15' 6" capacity, up to 9" thick material, electric motor, in very good condition

113

Logosol 4-Sided Moulder
#PH260, 10" x 16" capacity, includes blower and box of profiles

112A

*WoodWizz winch for loading and unloading large slabs
Never used

114

Kundig Single Head Belt Sander
43" belt, good condition

114A

Gravity Rolls
Steel plate 16" x 60" x 31" high, 2 pieces

115

12"-14" Delta Rockwell Tilting Arbor Saw
.

116

24" Oliver Jointer
Machine # 166-ED, serial # 50084, 10 HP electric motor

116A

Oliver Jointer for Blades On Straightoplane
1/2 HP grinder for planer

116B

* Oliver jointer sharpner
Head mount

117

Gravity feed roll
24" x 10' x 33" high, adjustable legs

117a

*Stretcher roll for small bands
Includes personnel fan.

118

Tannewitz 24" Bandsaw
Model GH, serial # 78134, 7 1/2 HP electric drive motor, 2 1/4" x 36" bandwheels

119

DeWalt Radial Arm Saw
14" blade, 5 HP electric drive, 3 phase

124A

Steel Building beside Hoop Building
40' x 160' with 16' eves, roof only, no sides, rated to withstand winds up to 120 mph

120

Ingersoll Rand Air Compressor
Model 2340, serial # NAR10184973, 5 HP electric motor, 60 gallon vertical tank

121

Vertical Air Tank
32" x 72" tank

122

Dongan Transformer
.

123

Square D Transformer
.

124

Hoop Building
45' x 50', 2 man doors, 1 18' door, has new tarp still in box

124B

Steel Building behind Hoop Building
45' x 50' with 16' eves, roof only, no sides, rated to withstand winds up to 120 mph

124C

Kiln Direct Lumber Kiln
Inside measurements are 11'6" x 27' x 12' high, LP furnace, in like new condition

125

Spray Booth
48' van trailer converted to spray booth, has lights, A/C, etc. nice setup

126

126a

* brewco 1600 parts
Set of crowned wheels. Feed chain and end feed sprocket. Hydraulic motors; serves guides. New 2" blades

127

40 HP Hydraulic Pack
Was used for runaround

128

4 Strand Transfer Deck
12' x 16' x 36" high, hydraulic drive

129

Dead Rolls
3' x 14' x 90" high, 8" x 30" rolls, 36" roll spacing, 2 7/16" shaft

130

4 Strand Transfer Deck
9' x 12' x 40" high, hydraulic drive

131

10 HP Hydraulic Pack
Was used for decks

132

4 Strand Transfer Deck
7' x 10' x 30" high, hydraulic drive, missing 1 chain

133

Brewco B-4840 Grade Edger
Model BGBE, serial # BWD436, 16" blades, 8' infeed, 6' x 26' tailing belt, laser system, 5 HP hydraulic pack

134

Roll Case
40" x 50', 8 1/2" x 30" rolls, 42" roll spacing, 2 1/2" shaft, electric drive

135

Belt Conveyor
27" x 30' x 36" high, 20" belt (needs replaced), hydraulic drive

136

4 Strand Transfer Deck
12' 4" x 24' x 34" high, electric drive, H-130 rooftop chain

137

4 Strand Transfer Deck
12'4" x 12', electric drive

138

Newman K-2S Trim Saw
80" x 30', 24" blades, electric

139

Outfeed from Trim Saw
11' x 12', electric drive

140

Barnsweep under Brewco
48" x 25', electric drive

141

Waste Conveyor
25" x 75' with 12" sides, electric drive

142

Waste Conveyor on Incline
25" x 36' with 12" sides, electric drive

147

Steel Building
50' x 140', 18' sidewalls, roof only, open sides, rated to withstand winds up to 120 mph

143

Waste Conveyor
32" x 150' with 12" sides, electric drive

148

Steel Building
25' x 44', 16' sidewalls, 36" man door, has divider wall, roof is insulated but not sides, 1-18' roll up door, 1-12' roll up door, rated to withstand winds up to 120 mph

144

Waste Belt
30" x 40', 16" belt, 12" sides, electric drive

145

Quincy Compressor
Model QTH-120AMPRO, 10 HP electric motor, 120 gallon horizontal tank

145A

Electrical Boxes and Transformer
In building with Brewco

146

Steel Structure and Catwalk in Building with Brewco
Includes frame that scragg mill used to sit on.

149

Vacutherm
Model 500, serial # 06-502-8, 4' x 18' pan, diesel boiler, good condition

150

Go Fast Manual Chop Saw
80" infeed, 60" outfeed, 28" blade, electric motor

151

Holtec Pack Saw
60" cutting capacity, 25' infeed with lift arms, 21' outfeed, 15 HP electric motor, includes hydraulic pack

152

Waste Conveyor under Pack Saw
30" x 18' with additional 18' on incline, 30" belt, 12" sides, electric drive

153

Precision Chipper
Chipper size 66-18, serial # 6-2588, no drive, rough condition

153a

* 2 pallets of parts for precision chipper
Fits lot 153. Knives. Babbitt pot ladles counter knives fans
ect.

154

Lincoln Electric Motor
400 HP, 1780 RPM, frame 449T

154A

Electrical under Chipper
Soft start, main cutoff.

155

Precision Vibrating Conveyor
37" x 20', 24" pan, electric drive, infeed for chipper, does not include fiberglass section

156

Fiberglass Section and MDI XR-300 Metal Detector
24" pan x 60", has a few cracks

157

Chain Conveyor under Chipper
22" x 36' with 14" chain, electric drive

158

Precision Chip Screen
Serial # S-1927, 10' x 10', electric drive

159

Chain Conveyor
18" x 26', paddle chain, electric drive

160

Chain Conveyor
10" x 38', paddle chain, no drive

161

Phelps 2 Van Chip Blower
20 HP electric motor

162

Baker Super Streak Band Sawmill
Model BBS-0"3650E", serial # 13-721, up to 30' logs, chain turners, 90" off bearer belt, includes hydraulic pack, 1 1/4" x 36" bandwheels, 1 1/2" x 240" bands

162a

* pallet of parts for Baker 3650 band mill

162b

* Baker parts 3650
Band wheel Sheave and center main bearings.

162c

* Baker 3650 band mill parts
Full pallet

162d

* baker 3650 band mill blades
1 pallet

163

Baker 4 Strand Log Deck with Stop and Load
16' x 20' 6" x 74" high, hydraulic drive

164

Barnsweep underneath Baker
48" x 36', hydraulic drive

165

Waste Conveyor
18" x 40', hydraulic drive, paddle chain

166

Ingersoll Rand Air Compressor
Model 2545, serial # 1139425, 120 gallon vertical tank, electric motor

167

Wood-Mizer Single Head Resaw
Model SHR, serial # SHR25-HD1204100200A1.05, 10' infeed and outfeed, 25 HP electric motor, 1 1/2" bands, 24" bandwheels, 10" x 10" capacity, 1 1/2" x 158" bands

167a

* lot of blades for Woodmizer SHR

167b

* slat feed chain
Slat chain for resaw feed chain 81x chain

168

169

Skate Roller
48" x 15' x 32" high

170

HWP Tilting Roll Case
40" x 20' x 54" high, 6" x 31" rolls, 16" roll spacing, 1 7/16" shaft, hydraulic drive

171

HWP Tilting Roll Case
40" x 10' x 54" high, 6" x 31" rolls, 16" roll spacing, 1 7/16" shaft, hydraulic drive

172

20 HP Hydraulic Pack
Was used for tilting roll cases.

173

Roll Case with Kickoffs
32" x 35' x 58" high, hydraulic drive, 6" x 24" rolls, 25"-33" roll spacing

174

Baker 4 Strand Transfer Deck
16' x 16' x 36" high, hydraulic drive

175

5 HP Hydraulic Pack
.

176

Pipers Saw Shop Chipper Knife Grinder
Electric drive. 48" Bed

177

Wood-Mizer Band Sharpener
Model LTAGAP-UM, serial # LTAGA/450/2012, electric drive

178

Wood-Mizer BMT200/250 Dual Tooth Setter
.

179

Shipping Container set up as Sharpening Room
8' x 40', fully wired

180

HWP Shaving Machine
36" x 59" infeed box, 50 HP electric motor, 40 HP hydraulic pack, includes conveyor underneath, good working condition

181

HWP Log Deck
6' x 21', hydraulic drive, needs work

182

Paddle Chain Conveyor
20" x 25' with 9" sides, hydraulic drive

182A

Holtec Transcut II
#96226, 60" max cutting capacity, 3 phase electric motor

183

183a

Planer knives
For Yates American

183B

Transfer Deck*
3-strand, 4-strand,

183C

Belt Conveyor*
12" belt, electric drive, 22' long

183D

Green Chain*
3-strand, electric drive, 24' long

184

Lincoln Electric Motor
100 HP, 1775 RPM, frame 404T

185

Tooling for Yates A20 Planer
2" arbor

186

Tooling for Yates A20 Planer
2" arbor

187

Tooling for Yates A20 Planer
2" arbor

188

Tooling for Yates American A20 Planer
2" arbor

189

Tooling for Yates A20 Planer
2" arbor

190

Tooling for Yates A20 Planer
2" arbor

191

Parts for Yates A20 Planer
.

192

Belt Drive Shaft
.

192A

Side Head Grinder*
W/side head bits and wrenches, for A20 Planer,

193

Pulley Assembly For Yates Planer
.

194

48" Dust Blower
50 HP electric motor

195

Mettler Toledo Scales
Model LYNX, serial # 5521261-5DH, 12' x 75'

196

2000 Gallon Fuel Tank With Fill Hose

197

2000 Gallon Fuel Tank With Fill Hose

198

Fuel Tank

199

Fuel Tank

200

Fuel Tank
Was used for hydraulic oil

300

301

John Deere 548G Grapple Skidder
PIN DW548GX577880, winch, open cab, meter reads 11,061 hrs. this was the backup machine so hasn't been used much in the last 3 years, works good

301A

Skidder Grapple*
Rough condition

302

Tigercat 718 Feller Buncher
Serial # 7180607, just came out of woods, good working condition, the one door is bent but will try to have fixed by auction time, watch for updates.

303

Tigercat 240B Knuckleboom
On Pitts trailer, enclosed cab, delimber, continuous swivel grapple, bucksaw hookups, came straight out of the woods, was being used daily, good working condition

304

305

CSI Bucksaw
DL-4400 Classic, 50" bar, 73" x 25' 5" deck, lever controls, was used wit lot # 304

305A

CSI Bucksaw
60" bar, 20' bunk

305AA

306

410B Prentice Knuckleboom
Serial # CP555-A-408, meter shows 794 hours, trailer is cut off, needs work or for parts only, enclosed cab

307

Volvo L90F Wheel Loader
PIN L90FV68400, engine model DE6-LAE3, 160 HP, 5.7 L, full cab, heat and A/C, meter shows 12,141 hours, 4 speed, good working condition, does not include any attachments

308

Volvo L90E Wheel Loader
PIN L90EV67825, engine model D6D-LAE2, 160 HP, 5.7 L full cab, heat and A/C, meter shows 5355 hours, 4 speed, good working condition, does not include any attachments

308A

308B

Cat LP Forklift
Meter reads 1673 hrs. 2 stage mast, side shift, includes tank, works good

309

International S1900 Dump Truck
Model 1954, VIN 1HTLDUXPXEHA24431, Eaton Transmission, meter shows 274,597 miles, was used as a yard truck, runs and operates

310

1989 Ford L8000 Dump Truck
VIN 1FDYU82A3KVA53157, GVWR 53,100 pounds, meter shows 72,920 miles, was used as a yard truck, runs and operates, need to file for lost title.

311

311A

Barko 80 Knuckleboom
Model 5222, serial # 119522260006, extendable boom, with hydraulic power pack, very low hours, in excellent condition

311B

Entirety Lot 311 & 311A
With 10% raise

312

313

314

315

316

317

318

Tiger Special 6640 Tractor
Enclosed cab, meter shows 2585 hours, PTO, engine runs, but needs clutch

319

2007 Electric Golf Car
VIN SHAQ0728778001, club car, rear seat, built in charger

334

1993 Strick Van Trailer
VIN 1S12E848XPE362384, box only, GVWR 65,000 pounds, 48' long, 102" wide, 119" sides

320

40' Genstar Chip Trailer
96" wide, 100" sides, good title and road ready

321

40' Chip Trailer
96" wide, 100" sides, good title and road ready

322

2000 ITI Open Top Chip Trailer
VIN 1Z92A4328YT029276, model SDS-A3, GVWR 29,484, 42' x 94" x 106" sides, good title and road ready

323

40' Genstar Open Top Chip Trailer
96" wide, 96" sides, with tarp cover, good condition, good title and road ready

324

1995 40' Peerless Chip Trailer
VIN 1PLE04229SPc18253, 94" wide x 109" sides, open top, good condition, good title and road ready

325

40' Open Top Chip Trailer
96" wide, 100" sides, good title and road ready

326

40' Maersk Open Top Chip Trailer
96" wide, 96" sides, with tarp cover, good title and road ready

326A

Tri-Axle Equipment Trailer With Ramps
25' deck, hydraulic ramps, has self contained hydraulic unit. No Title

327

Equipment Trailer
48' overall, main deck 25', upper deck 115", 48" flip up ramps, good title and road ready

328

Equipment Trailer
34' overall, deck 246", 102" wide, pintle hitch, 72" flip up ramps, good title and road ready

329

1995 Pitts Lag Trailer
Model LT-42-4, serial # LT42T35P950271, GVW 84,000, good title and road ready

330

42' AMC Log Trailer
Good condition, good title and road ready

331

40' Log Trailer
Flat bed with log bunks, 96" wide, good title and road ready

331A

40' Log Trailer
Rough condition

337

Contents inside off Lot 336
Electrical boxes and wires

331B

332

40' Triton Chip Box
96" wide, 96" sides, open top, box only

333

40' ITEL Storage Container
Serial # 733603, 96" wide, 108" sides

335

Steel Storage Container
20' long 96" wide, 101" sides, rough condition

336

Steel Storage Container
20' long 96" wide, 101" sides

336A

Trailer Frame*
Approx 42' , no axles

338

*FMC Logging Skidder
Complete but does not run

339

*Allis Chalmers 7G Track Front End Loader
Was running but weak power. Not cranked in couple years

340

*Windham All Terrain Forklift
Complete, motor blew gasket and is not running

341

*Hydro-Tec Steam Pressure Washer
Was bought in working condition but never used

372

Loader Forks

373

113" Loader Bucket
Quick attach

374

115" Loader Bucket
Quick attach

375

Loader Forks
60" forks, 3 5/8" hole, 7" wide

376

Quick Attach Loader Forks
88" forks, 25 1/2" from center of bottom pin to top of top pin, 40" center to center

377

110" Bucket
Rough condition

378

Cat 3 In 1 Skid Steer Bucket
70", Needs new hydraulic hoses

379

Cat Loader Bucket
100", 2.4 yard bold on cutting edge

380

Cat Loader Bucket
100", approximately 2.75 yard bolt on cutting edge

381

Loader Forks
5" wide, 48" long, 3 1/4" hole

382

Loader Forks
53" forks, quick attach

383

Dual Cylinder 9' Loader Rake
Serial # 29116ASH007, special VOLVO L90, quick attach

384

Extendaboom with Fork Pockets
36' reach, fork pockets are 4" x 6 1/2"

385

Quick Attach Loader Forks
50" forks, 64" wide

386

Quick Attach Loader Forks
56" forks, 80" wide

387

Quick Attach Bucket with Removable Forks
3 in 1 bucket, 94" wide, 42" forks

388

Quick Attach Grapple
90" wide, 58" forks

389

Quick Attach Grapple
64" wide, 53" forks

390

Wicker Quick Attach Grapple
Model WEQL110E, serial # 13254, 88" wide, 54" forks

390A

14' Grader for Loader
Fork pockets are 69" apart

391

Skid of Hubs
5 total Various growser teeth pieces

392

8 Chain Binders
.

393

Skid of Wire Protectors
.

394

Skid of Logging Safety Signs and Cones
.

395

Loader Seat and Transmission
.

396

Hydraulic Cylinders
56", 3" mounting hole, 3 smaller ones

397

4 Skids of Fans for Dry Kilns
.

398

Tiger Boom Flail
Serial # TBF-0525HP, 50" flail, hydraulic oil tank

399

60" mower
Hydraulic motor

400

7' Marden Stalk Chopper
Model SHLA36, serial # 99-92, needs new wheel

401

Woods Bat-Wing Mower
Model 9318, serial # 661350, 15' overall, PTO drive

402

72" Dust Cyclone
13" round inlet, 24" round outlet

403

Mellott Drop Belt
40" x 15', up to 24" belt, no drive, air cylinder

404

Roto Flow Chip Screen
Model BS-66, serial # 6-63-12, 1 7/8" screen, 6' x 6', electric drive

405

36" NYB Dust Blower
No drive

406

Fuel Tank
64" x 144"

407

48" Mellott Chain Turner
Hydraulic drive

408

15 HP Mellott Hydraulic Pack
.

409

100 HP Hydraulic Pack
.

410

Sumitomo Gear Box
Model CHHS-6195Y-R2-43, serial # IL0119443, 1750 RPM

411

Swing Chop Saw
5 HP electric motor

412

24" Dust Blower
No drive

412A

Lumber Rack*
47" X 80" X 42" , Fork Pocket

413

3 Strand Log Deck
128" x 15' x 80" high, electric drive

414

3 Strand Transfer Deck
10' x 23', hydraulic drive

415

Loading Arms
102" x 128"

416

112" John Deere Blade
3 point attach

417

Sockets, Gaskets, Cant Hooks, Etc.
3/4" drive socket set

417A

Steel Shafts and Pipe
2"-5" diameter

417B

Drain Pipe
8" x 16'. 7 pieces

418

Dead Rolls
18" x 20' x 34" high, 2 1/2" x 14 1/2" rolls

418a

* flat belt conveyor
With tensioner. 15' x 26". No belt or drive. Includes
skate roll section included

419

Yates Bandsaw
#53590, 44" bandwheels, 5" bands, 40 HP electric motor

420

Dead Rolls
65" x 191", 6 1/2" x 60" rolls, 27" roll spacing

421

36" Chip Blower
15 HP electric motor

422

CM & E Norman Chipper
Model 48, 8 knife, for parts or to rebuilt, no drive

423

Hourglass Rollcase
50" x 28' x 44" high, 17" x 36" rolls, 30" roll spacing, 2 1/2" shaft, no drive

424

Hourglass Rollcase
50" x 15' x 44" high, 17" x 36" rolls, 30" roll spacing, 2 1/2" shaft, hydraulic drive

425

Lightning 480 Resaw
#134424

426

36" Dust Blower
20 HP electric motor

427

4 Strand Transfer Deck
128" x 17' x 8' high, has steel slide off

428

36" Catwalk and Structure
.

429

CTR Bucksaw
Model CTR50-1A, serial # 50-123, 9' bunk

430

2-Lift RMS
63" X 100"

431

1/2 Ton Dayton Hoist System
.

432

Log Splitter
Up to 6' logs, 10 HP electric motor

432A

Loader Tires
20.5 R25

432B

Live Roll Case*
No drive, 48" X 6' 6"

433

Chop Saw
12' infeed, 9' outfeed, electric motor, 30" blade, air cylinders

433A

Shop Built Upcut Saw
20" blade, 10 hp direct drive electric motor, 13' infeed, air operated kicker and saw

434

Drive Shaft
2 1/2" x 26'

435

Gardner Denver Air Compressor
40 HP electric motor, meter reads 46,637 hours

436

Round Fuel Tank
42" x 94"

437

Lumber Cart
56" x 57 1/2", steel wheels, 50 1/2" center to center of wheels

437A

Lumber Cart
56" x 57 1/2", steel wheels, 50 1/2" center to center of wheels

437B

Lumber Cart
56" x 57 1/2", steel wheels, 50 1/2" center to center of wheels

437C

Lumber Cart
56" x 57 1/2", steel wheels, 50 1/2" center to center of wheels

437D

Lumber Cart
56" x 57 1/2", steel wheels, 50 1/2" center to center of wheels

437E

Lumber Cart
56" x 57 1/2", steel wheels, 50 1/2" center to center of wheels

438

Dust Collector
4- 22" outlets on bottom

438A

Tires*
325/65R18, 275/65R18

438B

Tires*
Variety of sizes

438C

Tires*
Variety of sizes

438D

Tires*
Variety of sizes, 231/2" , 10 lug

438E

Tires*
Variety of Sizes, 25" rims , 10 lug

438F

Cat Walk*
25" X 12' w/ 2 steps, Stairs 19 steps 20' long

438G

Steel Frame*
20' X 53" high

438H

Steel Frame*
12' high

439

Grader Wheels
14.00-24 tires, set of 4

440

North Star Power Washer and Air Compressor on Trailer
Approximately 250 gallon water tank, Honda motor on both units

623

Kiln Dried Live Edge Slabs
5 pine 32"-40" x 12', 7 red oak 12"-18" x 12', 21 gum 16"-24" x 12', 8 white oak 18"-24" x 12', 8 sycamore 16"-20" x 12', 49 total, labeled Shed 4

441

Overhead Crane on Wheels
8' x 12' x 14' high

442

Frame and Axles
.

443

Frame and Axles
.

444

Frame and Single Axle

445

Asbury Multi-Purpose Bucket
Model M125B, 3 1/2 yard, 10' wide

445A

Rims*
34 1/2" dia, 32" wide, set of 4, 10 lug

445B

Knuckleboom Grapple*
.

445C

Trash Bin*
48" X 72" X 49" deep, w/flip out door, Fork pockets

445D

Trash Bin*
48" X 76" X 49" , W/flip out door, fork pockets

445E

Self Dumping Hopper*
Bes-pac, model SDH, Ser# 105487, 60" X 72"

446

Drain Pipe
8"-20" x 16' long

447

PVC Drain Pipe
8"-20' long

447A

Pallet of Plumbing Parts*
Couplers, etc.

448

115" Loader Bucket
.

449

Pallet of Starters

450

*Signumat split stopper hammer and clips

451

*Signumat wood barcode hammer and couple hundred barcode clips

452

*GEM sander / polisher
Lots of extra sander paper for it and buffer rags

453

*GEM sander buffer & extras

454

*Uattend time clock system
works with online website

455

*Metal Pallet Cages
6 per lot

456

*Metal Pallet Cages
6 per lot

457

*Metal Pallet Cages
6 per lot

458

*Metal Pallet Cages
6 per lot

600

Kiln Dried Live Edge Slabs
22 pine 22"-34" x 12', 18 pine 16"-24" x 12', 14 pine 18"-24" x 12', 10 pine 16"-22" x 12', 12 pine 14"-20" x 12', 76 total, labeled 4A

601

602

603

604

605

Kiln Dried Live Edge Slabs
18 cypress 12"-18" x 12', 5 hickory 17"-24" x 10', 5 maple 16"-19" x 10', 2 pecan 18"-20" x 10', 30 total, labeled 1B

606

Kiln Dried Live Edge Slabs
4 spalted ash 14"-19" x 12', 4 pine 36" x 11' (thick), 4 spalted white oak 28"-34" x 11', 5 pine 27"-42" x 11', 1 red oak 24"-50" x 9', 18 total, labeled 1E

607

Kiln Dried Live Edge Slabs
10 maple 56"-60" x 60", labeled 1C

608

Kiln Dried Live Edge Slabs
11 sycamore 20"-30" x 12', 2 maple 12"-24" x 12', 4 pine 12"-18" x 12', 6 live oak 12"20" x 10', 3 sycamore 24"-30" x 12', 33 total, labeled 1D

609

610

611

Kiln Dried Live Edge Slabs
4 red oak 34"-40" x 7', 3 live oak 24" x 31" x 5' (thick), 9 walnut 20"-30" x 5' (crotch), 2 live oak 24"-27" x 5', 18 total, labeled 1F

612

Kiln Dried Live Edge Slabs
6 maple 40"-57" x 9', 4 live oak 26"-48" x 8', 4 maple 20"-36" x 7', 7 oak 21"-43" x 6', 21 total, labeled 2G

613

Kiln Dried Live Edge Slabs
4 red oak 32"-56" x 6', 4 live oak 20"-24" x 6', 1 red oak 36"-42" x 5', 3 red oak 22"-36" x 6', 2 live oak 15"-24" x 5', 14 total, labeled 1G

614

615

616

Kiln Dried Live Edge Slabs
7 red oak 20"-24" x 8', 21 sinker heart pine 10"-15" x 7', 5 sinker pecky cypress 22"-27" x 7', 1 sinker pecky 24" x 5', 6 white oak 14"-24" x 8', 53 total, labeled 2H

617

Kiln Dried Live Edge Slabs
16 river birch 12"-19" x 9', 4 pine 12"-24" x 7', 6 pignut hickory 12"-21" x 8', 9 red oak 22"-49" x 7', 6 white oak 16"-28" x 7', 41 total, labeled 1H

618

619

Air Dried Mantels
3 cherry 6 x 6 x 8", 9 mixed oak, 2 pine 6 x 16 x 8', 3 sycamore 6"-10" x 8', 2 pine 12" x 20" x 8', total of 31, labeled Mantels 2

620

Kiln Dried Live Edge Slabs
5 pecan 24"-40" x 16', 34 maple and ash 12"-24" x 16', 39 total, labeled Shed 1

621

Kiln Dried Live Edge Slabs
7 white oak 16"-34" x 12', 1 red oak 20" x 12', 7 sinker heart pecky cypress 12"-18" x 12', 1 poplar 25" x 12', 11 pine 27"-42" x 12', 44 total, labeled Shed 2

622

622A

Lumber Rack*
48" X 52" X 82" high, Fork Pockets

700

*4 drawer file cabinets.
Total of 12 behind hoop building

701

*1 5 drawer and 2 lateral file cabinets
behind hoop building

702

* pillow block taper lock bearings
1 pallet baker 3650 building

703

* maintenance tools
Come a longs pipe wrenches energpac

704

* 2 pallets of drive v belts

705

* belting and tools
Belt lacing. Lacing machine. Belt tighter belting

706

*pallet of jockey grinders
For headsaw and edger diamond wheel. Saw wrenches bit setter

707

*aceyelyne hoses gauges welding rods
Entire pallet

708

* pallet of solid tooth carbide tip saws
Various diameter and arbor size.

709

* pallet of air cylinders and 1 hyd

710

*pallet of misc
Pulleys Babbitt filled bearings bushings sprockets

711

* pallet of rods
Keyway copper tube pipe wrench misc

712

* lot of steel banding. Clips and tool

713

* plastic strapping clamps
6 boxes. No strapping

714

*polyester plastic strapping buckles and strapping tools
Includes phosphated wire buckles. 6 boxes
14 boxes 2 coil box 3/4 inch. Includes 4 strapping tools

715

*pallet of 81x chain

716

* 2 pallets of sprockets
1 large 1 small

717

* 1 pallet of roller chain.

718

* 1 pallet of roller chain

719

* pallet of roller drive chain
Includes chain drags

720

* pallet of chain repair kits and more
Pallet of roller chain and 81x. There are 2 pallets total in this lot

721

* 2 pallets of PQR size bushings

722

* pallet of R bushings
.

723

* pallet of hydraulic cylinders

724

* box pallet of air parts
Hoses. Directional valves filters cylinders

725

* lot of wood squares and 1/2 x 2 x 37 1/2 pieces
2 lots for 1. Baker 3650 building.

726

* 4’ stacking sticks as follows 45”. - 48” range
7 bins with contents

727

* new 5 bundles of 4’ stacking sticks
All for one money

728

* 1 lot of 8 ‘ stacking sticks

729

*loggibg tools
Impact set radiator

730

* logging parts
Coolers and spool of cable

731

* logging parts
Air hose lights

732

* logging parts
Grease power packs. Mud flaps. And fuel tank

733

* 5” metal pipe tire tubes
Firestone tire tubes. 9.0/10.00/16

734

* approx 27 alum. Crate
3 x 3 x 4.

735

* conveyor drive section with end sprocket section

736

* steel grating thread rod stick
Weatherhead electrical entrance

737

* floursant light fixtures
Approx 5

738

* Pendu 15” blower 5 hp

739

* cable pulley and steel section
Includes 2 pallets. One with h 78 and RTR chain.

741

* chipper shroud steel

742

* lumber racking
4' x 10, package packing rack

743

* lumber racking
4' x 10, package packing rack

744

* 2 roll stand

747

Belt Conveyor*
20" X 35' 8" , no belt , no drive

748

Track & Frame*
60' track, 60" on center, 60' extra track,

749

Scrap Steel*
I beams, Rods

750

Excel Gang Saw*
Needs rebuilt

751

Vibrating Conveyor*
26" X 14' X 32" high, electric drive

752

3-Strand Log Deck*
12' X 30' X 100" high , no chain, no drive

758

Pallet of Misc*
Benchtop Drill Press, electric drive, electric wire

759

Wrenches*
4" dust hose, sockets, etc

760

Nyle Dry Kiln System*
Model L1200, Ser# 982297, Honeywell controls, inludes duct work

761

Pallet of Misc*
Bolts, electric motors, Chain Hoist

762

Westair Drymatic*
.

763

Westair Drymatic*
Model Dac39a4/4 TS5, Ser# 391860, 3ph, 220 volts, Type R 22

764

Pentacryl Stabilizer*
Green wood stabilizer, 5 gal, 5- full Containers,

765

Pallet of Hand Tools*
Wrenches, grease guns, 40" 3/4 drive torque wrench,

766

Box of Misc*
Tool box , bolts, etc

767

Pallet of Motors*
1/ hp, 2hp, 15hp

768

Pallet of Electric Motors*
5hp, 3hp, gear drives

769

Pallet of Nails*
Variety of nails & screws

770

Pallet of electrical wire*
.

771

Brand New Wood-Wiz Hand Winch*
Straps, Pulleys

772

Grizzly Dust Collection*
Model G0671, Ser# M161682, 4hp

773

Pallet of electrical parts*
.

774

4 Ton Chain Hoist*
.

775

Electrical Panels*
.

776

* electrical entire pallet
Starters push button. Fuses

777

*2 pallets electrical
Boxes motor controls 0-3

778

* electrical connectors copper wire
1 pallet. 1 box of copper wire

779

* work table and drop cord

780

* electrical boxes and lights
2 pallets as marked

781

* 2 pallets. Motors. Electrical boxes

782

* propane lift cylinders
Some fuel inside

783

* hobart handler 135 welder
Includes helmets and rods

784

* show display package
2 tables and back drops

785

* pallet of fire extinguishers

786

* huge copper wire
2 pallets

787

* 3 x 4 roller table
Good working height

788

Pallet of Nail guns*
Paslode

789

Acme Transformer*
No T3030K0023B, MODEL Doe2016

790

Air Compressor*
Model Th5030, Ser# 70357, portable, 5hp honda, Westinghouse generator, Ryobi Radial Arm saw

790a

Air compressor with Honda off of 790

791

Pallet of Misc*
Oil sample kits, lug nuts

792

Metal Cart*
28" X 55" X 22" high, on casters

793

Pallet of Misc

794

* Table with contents
Dewalt 2.5 gallon 135 psi electric air compressor. Two DEWALT FLEXVOLT 6AH BATTERIES.
craftsman router
Ryobi sawzall. Drills angle grinders skil saw desalt charging units

796

* roller table for slabs
2 space heaters, safety equipment, had casters first aide boxes

797

* Tri deck
Steel clamps

798

* lumber tag inventory application.

799

* cleaning supplies
Mop. Bucket. Broom hand waste pan

800

* North Star power washer
Honda GC 190. Engine.

801

* saw horses
Slab heavy duty saw hirses and table

Ashley River Lumber Co., Inc.Previous Page Listing ID#: 1301679

Free Email Notifications

Bidder Terms and Conditions

Share This Listing

Other Sales byThis Company

Sponsored Links

Ashley River Lumber Co., Inc.

Bidder Terms and Conditions

Login

Sign Up

Sign Up

Login

Bidder Terms and Conditions

Ashley River Lumber Co., Inc.
Previous Page Listing ID#: 1301679

Other Sales by
This Company