Metal Locking Service
Previous Page Listing ID#: 1295215

Auction Location

Williamsville, NY 14221
Auction Dates and TimesSALE IS COMPLETED
Tuesday May 18, 2021 Completed
Auction Type
 Live Auction  VIEW ONLINE CATALOG
Company Information
Blackbird Asset Services, LLC

Website: blackbirdauctions.com

GoToAuction.com ID#: 3317
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Auction Bidder Agreement Bidder and Auctioneer agree that the Terms and Conditions listed below shall govern this Auction sale: 1. All persons seeking to register to bid acknowledges acceptance of these terms of sale, and guarantees prompt payment of all purchases by wire transfer, credit card or company check with bank letter of guarantee. No items will be removed prior to full payment, with all funds having cleared our accounts. 2. The "Bidder" becomes a "Buyer" upon the Auctioneers acceptance of their bid on one or more items in the Auction sale. 3. FULL PAYENT must be made immediately for your purchase at the Auction. This payment should be made in the form of cash, credit card (up to $5,000), company check with bank letter, cashiers check, or wire transfer (wire instructions on request). 4. Items left unpaid for more than 48 hours will be resold at the risk and expense of the Buyer. In the event that a Buyer fails to pay the entire purchase price (in addition to the Buyer's premium and any applicable tax) within 48 hours or otherwise fails to comply with these Terms and Conditions, Auctioneer and the Seller may retain any deposit paid as liquidated damages without notice. Auctioneer and the Seller reserve the right to resell such items without notice, and the defaulting Buyer shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling such items. 5. Auctioneer shall charge and collect from each Buyer a 15% Buyer's premium for each sale at the Auction, in addition to the purchase price as bid. Buyers that utilize our Webcast service shall be charged a buyer's premium of 18% for each sale at the Auction, in addition to the purchaser price. Buyers that pay by credit card will be charged a 3% convenience/credit card fee in addition to any buyers premiums so noted. 6. All items in the Auction shall be sold to the highest bidder; provided, however, that some items may be auctioned with minimum reserve prices, and/or subject to Seller's right of confirmation. Auctioneer reserves the right to reject any bid that is only a minimal increase over the preceding bid, that is not commensurate with the value of the item being offered, or any bid that Auctioneer believes was made illegally or in bad faith. Further, Auctioneer may bid at the Auction either for its own account or on behalf of the Seller or a third party. All sales are final. No returns or refunds will be permitted, unless authorized by the Seller in writing. 7. Collection of applicable taxes will be in accordance with the laws of New York. Auctioneer reserves the right to charge and collect tax on all purchases, shifting the burden of determining any 'tax exempt' status to the purchaser (if applicable). In such case tax refunds will be issued by the respective state. Sales tax for Erie County, NY is 8.75%. 8. For any purchase paid in cash with a value of $10,000 or greater, Buyer is required to complete US Treasury Dept. form #8300 at the time of purchase. 9. Removal and shipment of purchased items will be the sole responsibility of the Buyer. Removal for smalls and hand carry items will be immediately following the sale then Thursday, September 7 through Saturday September 9. Riggers scheduled thereafter by appointment. All purchases must be removed no later than September 16. Riggers are encouraged to review the PDF catalog and submit insurance certificates in advance of the auction. NO MATERIAL HANDLING EQUIPMENT OR TOOLS WILL BE MADE AVAILABLE BY THE SELLER OR AUCTIONEER FOR BUYERS' USE DURING ITEM REMOVAL. All Buyers and/or their agent riggers MUST comply with all insurance requirements as noted in the Auction catalog. 10. The Buyer becomes fully responsible for, and assumes all risk of loss and damage to items immediately upon acceptance of their bid. It shall be the responsibility of the Buyer to insure their purchases immediately. If the Buyer does not remove an item within the announced removal period, Auctioneer and the Seller may, in their sole discretion, deem the item to have been abandoned by the Buyer and the Buyer will have no further rights with respect to the item. 11. In the event of any dispute concerning the winning bid price for an item, the record kept by Auctioneer shall control. In any dispute between two or more bidders, the Auctioneers decision shall be absolute and final. 12. ALL ITEMS ARE SOLD AS IS, WHERE IS AND WITH ALL FAULTS. NEITHER SELLER NOR AUCTIONEER MAKES ANY WARRANTY, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY, VALUE OR CONDITION OF ANY ITEM. AUCTIONEER AND SELLER EXPRESSLY DISCLAIM ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT. 13. No sale shall be invalidated by reason of any defect or inaccuracy in any description or listing, and no liability shall be borne by the Auctioneer with respect to such errors. All information has been obtained from sources generally believed to be reliable, but the accuracy cannot be guaranteed or warranted by the Auctioneer. Bidder acknowledges it is their responsibility to inspect all items and to make their own inquires whether purchasing online via Webcast or live on site. 14. The aggregate respective liability of Seller or Auctioneer in respect of any other loss or damage suffered by a Buyer and arising out of or in connection with these Terms and Conditions or arising out of or in any way connected with a Buyer's participation in the Auction, whether in contract, tort (including negligence) or for breach of statutory duty or in any other way, shall not exceed (i) in the case of the Seller, the amount of the purchase price paid by the Buyer; and (ii) in the case of the Auctioneer, the Buyer's premium paid by the Buyer, in each case in respect of the goods which are the subject of the claim. 15. Computers, drives and other electronic equipment may contain copywritten software that is governed by a license agreement issued to a third party. In such event the Buyer acknowledges that said software and license agreement(s) are not included in their purchase(s). Buyer guarantees the destruction of any personally identifiable information that may be stored on such devices, and shall indemnify and hold harmless the Auction Company and their Seller from any claims, suits or other actions brought against them that relates in any way to personally identifiable information or any other data that remains on such devices, latent or obvious. 16. Buyers acknowledge that an Auction site or the Seller's site is a potentially dangerous place. Flammable, noxious, corrosive and pressurized substances may be present. Heavy equipment may be operated, and electrical circuits may be live. Every person enters such site at his or her own risk with notice of the condition of the premises and the activities that will be or have been conducted on the premises. Buyers shall so advise their agents and employees. No person shall have any claim against Auctioneer, the Seller or their respective agents or employees for any injuries sustained or for damages to or loss of person or property that may occur at such site. 17. These Terms and Conditions are incorporated and merged with any sale specific Terms and Conditions that may be distributed via our online bidding site and or at the physical auction location.
Listing Information
Surplus to the operations of Metal Locking Service, a key provider of cast iron locomotive engine block repairs for GE and Class 1 Railroads (FDL & EVO crankcases), Blackbird Asset Services has been retained to sell the following at auction. The auction of Metal Locking Services surplus has closed.

101
Monarch lathe, 4-jaw chuck, toolpost, tailstock
Monarch 18" x 48" lathe (SN 29135), 4-jaw chuck, toolpost, tailstock, threading, 18-750 RPM, 20.5" swing, 48" between centers

101
Monarch CII engine lathe, 4-jaw chuck, tailstock
Monarch CII 20" x 72" engine lathe, SN: 12808, actual swing 22.5", 4-jaw chuck, tailstock

102
Reed-Prentice tool room lathe, Yuasa tool post
Reed-Prentice 14" x 60" tool room lathe (SN 19023), 18-536 RPM, Yuasa tool post (SN 74-6), 3 jaw chuck, tailstock

103
Rogers IT 36, 36" vertical boring mill
Rogers 36" vertical boring mill model IT 36 (SN 1148), 30" 4 jaw chuck, 5 station turret, 19" under turret

104
Abrasive 3-B surface grinder, magnetic chuck
Abrasive 3-B surface grinder (SN 734), 8" x 22" magnetic chuck

105
Bridgeport series I vertical milling machine
Bridgeport series I vertical milling machine (SN 7588), 2 HP, 9" x 42" T-slot table, power feed

106
Wells Index 747 vertical milling machine, 1.5 HP
Wells Index model 747 vertical milling machine, 1.5 HP, 2 axis Acu-Rite II digital read out (not working), 50" T-slot table, Serial number 18676 (vise in photo not included)

107
Mitts and Merrill #2 Keyseater (SN D2513)
Mitts and Merrill #2 Keyseater (SN D2513)

108
Cincinnati 20" shaper, T-slot box table
Cincinnati 20" shaper, 15" x 14" x 15" T-slot box table

109
Cincinnati Bickford Super Serve drill press
Cincinnati Bickford Super Serve drill press (SN 2L 2706), 24" throat, 19" x 24" T-slot table (vise in photo not included)

110
Toyoda FVN50 vertical machining center, CAT 50
Toyoda FVN50 vertical machining center, CAT 50 taper, 20-position automatic tool changer, 20" x 36" T-slot table, Fanuc Systems 6M control, X=800mm, Y=560mm, Z=560mm, SN: NF1499

111
Rockford F207AS13 28" shaper model
Rockford F207AS13 28" shaper (SN 41 HE 45), 17" x 14" x 17" box table, 10 HP drive

112
Thompson 6 x 18 surface grinder, magnetic chuck
Thompson 6 x 18 surface grinder (SN F41214), 6" x 18" Walker magnetic chuck

113
Baldor pedestal grinder 153C, 1/2 HP, 115 V
Baldor pedestal grinder 153C (SN 461), 1/2 HP, 115 V, 3450 RPM, very heavy steel pedistal

114
Milwaukee horizontal mill #2
Milwaukee horizontal mill #2 (SN A1262H)

115
Cincinnati #2 knee type vertical milling machine
Cincinnati #2 knee type vertical milling machine, 50 taper, SN A1262H

116
Avey twin spindle drill press, M 1/2 heavy
Avey twin spindle drill press (SN A1262H), M 1/2 heavy, 6" throat, 12" x 23" table

117
Milwaukee K #2 horizontal milling machine
Milwaukee horizontal milling machine model K #2, 57" T-slot table

118
Betts double-column boring mill, 96" rotary table
Betts double-column boring mill, 96" rotary table, 4 jaws, 104" between sides (frame opened for 102" swing), right head 5 position turret, left head boring / single tool, operator platform included, no pit required (flush mount)

119
HYD-MECH S-20A band saw, 240V
HYD-MECH S-20A band saw (SN 10196972), 240V, 3 PH, 3 + 2 HP, horizontal pivot band saw, 13"H x 18"W capacity at 90 degrees

121
Cincinnati Bickford Super Service radial drill
Cincinnati Bickford Super Service radial drill, 10" column x 60", 29" x 56" T-Slot table, variable speed, SN: 2E-306

122
Tsudakoma RNCM-401R 4th axis rotary table attach.
Tsudakoma model RNCM-401R 4th axis rotary table attachment, 15 3/4" rotary table, center attachment, 1 1/2" through, SN: 510556

123
Cincinnati Bickford Super Service portable horizon
Cincinnati Bickford Super Service portable horizontal drilling machine, six speed 100-950 RPM, 9" x 60" column, #4MT taper, 10" horizontal spindle travel, 24" column traverse (horizontal on base), 360 degree column swivel, 32" travel of head on colu...

124
Van Norman Perfect-O 999 boring bar, 54"
Van Norman Perfect-O 999 boring bar, 54", SN 20123-P30

125
Van Norman Perfect-O 999 boring bar, 65"
Van Norman Perfect-O 999 boring bar, 65", SN H1007-854

130
6" machine vise
6" machine vise

131
F&D 6" x 1" milling cutter, 1 1/2" arbor
F&D 6" x 1" milling cutter, 1 1/2" arbor, .060" radius on one side, resharpened RE112681

132
F&D 6" x 1" milling cutter, 1 1/2" arbor
F&D 6" x 1" milling cutter, 1 1/2" arbor, .060" radius on one side, resharpened RE112681

133
F&D 6" x 1" milling cutter, 1 1/2" arbor
F&D 6" x 1" milling cutter, 1 1/2" arbor, .060" radius on one side, resharpened RE112681

134
F&D 6" x 1" milling cutter, 1 1/2" arbor
F&D 6" x 1" milling cutter, 1 1/2" arbor, .060" radius on one side, resharpened RE112681

135
F&D 6" x 1" milling cutter, 1 1/2" arbor
F&D 6" x 1" milling cutter, 1 1/2" arbor, .060" radius on one side, resharpened RE112681

136
F&D 6" x 1" cobalt milling cutter, 1 1/2" arbor
F&D 6" x 1" cobalt milling cutter, tin coated, 1 1/2" arbor, staggered tooth, see photo for other cutter specifications, RE-L601004-092

137
F&D cobalt milling cutter, tin coated
F&D cobalt milling cutter, tin coated, see photo for other cutter specifications, SPT-35295-003

138
F&D 6" x 1" milling cutter, 1 1/2" arbor
F&D 6" x 1" milling cutter, 1 1/2" arbor, .060" radius on one side, resharpened RE112681

139
F&D 6" x 1" cobalt milling cutter, 1 1/2" arbor
F&D 6" x 1" cobalt milling cutter, 1 1/2" arbor, 16 staggered tooth, see photo for other cutter specifications, SPL601004-092

140
Lot of misc. milling cutters
Lot of misc. milling cutters

141
Lot of misc. milling cutters
Lot of misc. milling cutters

142
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

143
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

144
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

145
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

146
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

147
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

148
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

149
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

150
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

151
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

152
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

153
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

154
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

155
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

156
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

157
Lot of (10) misc. tool holders as photographed
Lot of (10) misc. tool holders as photographed

158
Lot of (10) misc. tool holders as photographed
Lot of (10) misc. tool holders as photographed

159
Lot of (11) misc. tool holders as photographed
Lot of (11) misc. tool holders as photographed

160
Lot of (11) misc. tool holders as photographed
Lot of (11) misc. tool holders as photographed

161
Lot of (11) misc. tool holders as photographed
Lot of (11) misc. tool holders as photographed

162
Lot of (12) misc. tool holders as photographed
Lot of (12) misc. tool holders as photographed

163
Lot of (10) misc. tool holders as photographed
Lot of (10) misc. tool holders as photographed

164
Lot of (10) misc. tool holders as photographed
Lot of (10) misc. tool holders as photographed

165
Lot of (10) misc. tool holders as photographed
Lot of (10) misc. tool holders as photographed

166
Lot of (11) misc. tool holders as photographed
Lot of (11) misc. tool holders as photographed

167
Lot of (11) misc. tool holders as photographed
Lot of (11) misc. tool holders as photographed

168
Lot of (10) misc. tool holders as photographed
Lot of (10) misc. tool holders as photographed

169
Lot of cutting tools and bits as photographed
Lot of cutting tools and bits as photographed

170
Lot of cutting tools and bits as photographed
Lot of cutting tools and bits as photographed

171
Lot of (4) misc. tool holders as photographed
Lot of (4) misc. tool holders as photographed


Auction License: PA, MA, FL, NC, VI, WV, OH
Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Sponsored Links

Metal Locking Service

Blackbird Asset Services, LLC

Blackbird Asset Services, LLC


Contact:
Phone:
Sale Location
Auction has closed
Williamsville, NY 14221
Sale Dates and Times
Tuesday May 18, 2021 Completed
Sale Terms and Conditions
Auction Bidder Agreement Bidder and Auctioneer agree that the Terms and Conditions listed below shall govern this Auction sale: 1. All persons seeking to register to bid acknowledges acceptance of these terms of sale, and guarantees prompt payment of all purchases by wire transfer, credit card or company check with bank letter of guarantee. No items will be removed prior to full payment, with all funds having cleared our accounts. 2. The "Bidder" becomes a "Buyer" upon the Auctioneers acceptance of their bid on one or more items in the Auction sale. 3. FULL PAYENT must be made immediately for your purchase at the Auction. This payment should be made in the form of cash, credit card (up to $5,000), company check with bank letter, cashiers check, or wire transfer (wire instructions on request). 4. Items left unpaid for more than 48 hours will be resold at the risk and expense of the Buyer. In the event that a Buyer fails to pay the entire purchase price (in addition to the Buyer's premium and any applicable tax) within 48 hours or otherwise fails to comply with these Terms and Conditions, Auctioneer and the Seller may retain any deposit paid as liquidated damages without notice. Auctioneer and the Seller reserve the right to resell such items without notice, and the defaulting Buyer shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling such items. 5. Auctioneer shall charge and collect from each Buyer a 15% Buyer's premium for each sale at the Auction, in addition to the purchase price as bid. Buyers that utilize our Webcast service shall be charged a buyer's premium of 18% for each sale at the Auction, in addition to the purchaser price. Buyers that pay by credit card will be charged a 3% convenience/credit card fee in addition to any buyers premiums so noted. 6. All items in the Auction shall be sold to the highest bidder; provided, however, that some items may be auctioned with minimum reserve prices, and/or subject to Seller's right of confirmation. Auctioneer reserves the right to reject any bid that is only a minimal increase over the preceding bid, that is not commensurate with the value of the item being offered, or any bid that Auctioneer believes was made illegally or in bad faith. Further, Auctioneer may bid at the Auction either for its own account or on behalf of the Seller or a third party. All sales are final. No returns or refunds will be permitted, unless authorized by the Seller in writing. 7. Collection of applicable taxes will be in accordance with the laws of New York. Auctioneer reserves the right to charge and collect tax on all purchases, shifting the burden of determining any 'tax exempt' status to the purchaser (if applicable). In such case tax refunds will be issued by the respective state. Sales tax for Erie County, NY is 8.75%. 8. For any purchase paid in cash with a value of $10,000 or greater, Buyer is required to complete US Treasury Dept. form #8300 at the time of purchase. 9. Removal and shipment of purchased items will be the sole responsibility of the Buyer. Removal for smalls and hand carry items will be immediately following the sale then Thursday, September 7 through Saturday September 9. Riggers scheduled thereafter by appointment. All purchases must be removed no later than September 16. Riggers are encouraged to review the PDF catalog and submit insurance certificates in advance of the auction. NO MATERIAL HANDLING EQUIPMENT OR TOOLS WILL BE MADE AVAILABLE BY THE SELLER OR AUCTIONEER FOR BUYERS' USE DURING ITEM REMOVAL. All Buyers and/or their agent riggers MUST comply with all insurance requirements as noted in the Auction catalog. 10. The Buyer becomes fully responsible for, and assumes all risk of loss and damage to items immediately upon acceptance of their bid. It shall be the responsibility of the Buyer to insure their purchases immediately. If the Buyer does not remove an item within the announced removal period, Auctioneer and the Seller may, in their sole discretion, deem the item to have been abandoned by the Buyer and the Buyer will have no further rights with respect to the item. 11. In the event of any dispute concerning the winning bid price for an item, the record kept by Auctioneer shall control. In any dispute between two or more bidders, the Auctioneers decision shall be absolute and final. 12. ALL ITEMS ARE SOLD AS IS, WHERE IS AND WITH ALL FAULTS. NEITHER SELLER NOR AUCTIONEER MAKES ANY WARRANTY, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY, VALUE OR CONDITION OF ANY ITEM. AUCTIONEER AND SELLER EXPRESSLY DISCLAIM ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT. 13. No sale shall be invalidated by reason of any defect or inaccuracy in any description or listing, and no liability shall be borne by the Auctioneer with respect to such errors. All information has been obtained from sources generally believed to be reliable, but the accuracy cannot be guaranteed or warranted by the Auctioneer. Bidder acknowledges it is their responsibility to inspect all items and to make their own inquires whether purchasing online via Webcast or live on site. 14. The aggregate respective liability of Seller or Auctioneer in respect of any other loss or damage suffered by a Buyer and arising out of or in connection with these Terms and Conditions or arising out of or in any way connected with a Buyer's participation in the Auction, whether in contract, tort (including negligence) or for breach of statutory duty or in any other way, shall not exceed (i) in the case of the Seller, the amount of the purchase price paid by the Buyer; and (ii) in the case of the Auctioneer, the Buyer's premium paid by the Buyer, in each case in respect of the goods which are the subject of the claim. 15. Computers, drives and other electronic equipment may contain copywritten software that is governed by a license agreement issued to a third party. In such event the Buyer acknowledges that said software and license agreement(s) are not included in their purchase(s). Buyer guarantees the destruction of any personally identifiable information that may be stored on such devices, and shall indemnify and hold harmless the Auction Company and their Seller from any claims, suits or other actions brought against them that relates in any way to personally identifiable information or any other data that remains on such devices, latent or obvious. 16. Buyers acknowledge that an Auction site or the Seller's site is a potentially dangerous place. Flammable, noxious, corrosive and pressurized substances may be present. Heavy equipment may be operated, and electrical circuits may be live. Every person enters such site at his or her own risk with notice of the condition of the premises and the activities that will be or have been conducted on the premises. Buyers shall so advise their agents and employees. No person shall have any claim against Auctioneer, the Seller or their respective agents or employees for any injuries sustained or for damages to or loss of person or property that may occur at such site. 17. These Terms and Conditions are incorporated and merged with any sale specific Terms and Conditions that may be distributed via our online bidding site and or at the physical auction location.
Listing Details
Surplus to the operations of Metal Locking Service, a key provider of cast iron locomotive engine block repairs for GE and Class 1 Railroads (FDL & EVO crankcases), Blackbird Asset Services has been retained to sell the following at auction. The auction of Metal Locking Services surplus has closed.

101
Monarch lathe, 4-jaw chuck, toolpost, tailstock
Monarch 18" x 48" lathe (SN 29135), 4-jaw chuck, toolpost, tailstock, threading, 18-750 RPM, 20.5" swing, 48" between centers

101
Monarch CII engine lathe, 4-jaw chuck, tailstock
Monarch CII 20" x 72" engine lathe, SN: 12808, actual swing 22.5", 4-jaw chuck, tailstock

102
Reed-Prentice tool room lathe, Yuasa tool post
Reed-Prentice 14" x 60" tool room lathe (SN 19023), 18-536 RPM, Yuasa tool post (SN 74-6), 3 jaw chuck, tailstock

103
Rogers IT 36, 36" vertical boring mill
Rogers 36" vertical boring mill model IT 36 (SN 1148), 30" 4 jaw chuck, 5 station turret, 19" under turret

104
Abrasive 3-B surface grinder, magnetic chuck
Abrasive 3-B surface grinder (SN 734), 8" x 22" magnetic chuck

105
Bridgeport series I vertical milling machine
Bridgeport series I vertical milling machine (SN 7588), 2 HP, 9" x 42" T-slot table, power feed

106
Wells Index 747 vertical milling machine, 1.5 HP
Wells Index model 747 vertical milling machine, 1.5 HP, 2 axis Acu-Rite II digital read out (not working), 50" T-slot table, Serial number 18676 (vise in photo not included)

107
Mitts and Merrill #2 Keyseater (SN D2513)
Mitts and Merrill #2 Keyseater (SN D2513)

108
Cincinnati 20" shaper, T-slot box table
Cincinnati 20" shaper, 15" x 14" x 15" T-slot box table

109
Cincinnati Bickford Super Serve drill press
Cincinnati Bickford Super Serve drill press (SN 2L 2706), 24" throat, 19" x 24" T-slot table (vise in photo not included)

110
Toyoda FVN50 vertical machining center, CAT 50
Toyoda FVN50 vertical machining center, CAT 50 taper, 20-position automatic tool changer, 20" x 36" T-slot table, Fanuc Systems 6M control, X=800mm, Y=560mm, Z=560mm, SN: NF1499

111
Rockford F207AS13 28" shaper model
Rockford F207AS13 28" shaper (SN 41 HE 45), 17" x 14" x 17" box table, 10 HP drive

112
Thompson 6 x 18 surface grinder, magnetic chuck
Thompson 6 x 18 surface grinder (SN F41214), 6" x 18" Walker magnetic chuck

113
Baldor pedestal grinder 153C, 1/2 HP, 115 V
Baldor pedestal grinder 153C (SN 461), 1/2 HP, 115 V, 3450 RPM, very heavy steel pedistal

114
Milwaukee horizontal mill #2
Milwaukee horizontal mill #2 (SN A1262H)

115
Cincinnati #2 knee type vertical milling machine
Cincinnati #2 knee type vertical milling machine, 50 taper, SN A1262H

116
Avey twin spindle drill press, M 1/2 heavy
Avey twin spindle drill press (SN A1262H), M 1/2 heavy, 6" throat, 12" x 23" table

117
Milwaukee K #2 horizontal milling machine
Milwaukee horizontal milling machine model K #2, 57" T-slot table

118
Betts double-column boring mill, 96" rotary table
Betts double-column boring mill, 96" rotary table, 4 jaws, 104" between sides (frame opened for 102" swing), right head 5 position turret, left head boring / single tool, operator platform included, no pit required (flush mount)

119
HYD-MECH S-20A band saw, 240V
HYD-MECH S-20A band saw (SN 10196972), 240V, 3 PH, 3 + 2 HP, horizontal pivot band saw, 13"H x 18"W capacity at 90 degrees

121
Cincinnati Bickford Super Service radial drill
Cincinnati Bickford Super Service radial drill, 10" column x 60", 29" x 56" T-Slot table, variable speed, SN: 2E-306

122
Tsudakoma RNCM-401R 4th axis rotary table attach.
Tsudakoma model RNCM-401R 4th axis rotary table attachment, 15 3/4" rotary table, center attachment, 1 1/2" through, SN: 510556

123
Cincinnati Bickford Super Service portable horizon
Cincinnati Bickford Super Service portable horizontal drilling machine, six speed 100-950 RPM, 9" x 60" column, #4MT taper, 10" horizontal spindle travel, 24" column traverse (horizontal on base), 360 degree column swivel, 32" travel of head on colu...

124
Van Norman Perfect-O 999 boring bar, 54"
Van Norman Perfect-O 999 boring bar, 54", SN 20123-P30

125
Van Norman Perfect-O 999 boring bar, 65"
Van Norman Perfect-O 999 boring bar, 65", SN H1007-854

130
6" machine vise
6" machine vise

131
F&D 6" x 1" milling cutter, 1 1/2" arbor
F&D 6" x 1" milling cutter, 1 1/2" arbor, .060" radius on one side, resharpened RE112681

132
F&D 6" x 1" milling cutter, 1 1/2" arbor
F&D 6" x 1" milling cutter, 1 1/2" arbor, .060" radius on one side, resharpened RE112681

133
F&D 6" x 1" milling cutter, 1 1/2" arbor
F&D 6" x 1" milling cutter, 1 1/2" arbor, .060" radius on one side, resharpened RE112681

134
F&D 6" x 1" milling cutter, 1 1/2" arbor
F&D 6" x 1" milling cutter, 1 1/2" arbor, .060" radius on one side, resharpened RE112681

135
F&D 6" x 1" milling cutter, 1 1/2" arbor
F&D 6" x 1" milling cutter, 1 1/2" arbor, .060" radius on one side, resharpened RE112681

136
F&D 6" x 1" cobalt milling cutter, 1 1/2" arbor
F&D 6" x 1" cobalt milling cutter, tin coated, 1 1/2" arbor, staggered tooth, see photo for other cutter specifications, RE-L601004-092

137
F&D cobalt milling cutter, tin coated
F&D cobalt milling cutter, tin coated, see photo for other cutter specifications, SPT-35295-003

138
F&D 6" x 1" milling cutter, 1 1/2" arbor
F&D 6" x 1" milling cutter, 1 1/2" arbor, .060" radius on one side, resharpened RE112681

139
F&D 6" x 1" cobalt milling cutter, 1 1/2" arbor
F&D 6" x 1" cobalt milling cutter, 1 1/2" arbor, 16 staggered tooth, see photo for other cutter specifications, SPL601004-092

140
Lot of misc. milling cutters
Lot of misc. milling cutters

141
Lot of misc. milling cutters
Lot of misc. milling cutters

142
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

143
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

144
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

145
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

146
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

147
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

148
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

149
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

150
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

151
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

152
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

153
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

154
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

155
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

156
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

157
Lot of (10) misc. tool holders as photographed
Lot of (10) misc. tool holders as photographed

158
Lot of (10) misc. tool holders as photographed
Lot of (10) misc. tool holders as photographed

159
Lot of (11) misc. tool holders as photographed
Lot of (11) misc. tool holders as photographed

160
Lot of (11) misc. tool holders as photographed
Lot of (11) misc. tool holders as photographed

161
Lot of (11) misc. tool holders as photographed
Lot of (11) misc. tool holders as photographed

162
Lot of (12) misc. tool holders as photographed
Lot of (12) misc. tool holders as photographed

163
Lot of (10) misc. tool holders as photographed
Lot of (10) misc. tool holders as photographed

164
Lot of (10) misc. tool holders as photographed
Lot of (10) misc. tool holders as photographed

165
Lot of (10) misc. tool holders as photographed
Lot of (10) misc. tool holders as photographed

166
Lot of (11) misc. tool holders as photographed
Lot of (11) misc. tool holders as photographed

167
Lot of (11) misc. tool holders as photographed
Lot of (11) misc. tool holders as photographed

168
Lot of (10) misc. tool holders as photographed
Lot of (10) misc. tool holders as photographed

169
Lot of cutting tools and bits as photographed
Lot of cutting tools and bits as photographed

170
Lot of cutting tools and bits as photographed
Lot of cutting tools and bits as photographed

171
Lot of (4) misc. tool holders as photographed
Lot of (4) misc. tool holders as photographed

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Metal Locking Service
 Live Auction
Auction Date(s)
Tuesday May 18, 2021 Completed
Auction Location

Williamsville, NY 14221
Company
Blackbird Asset Services, LLC

Website: blackbirdauctions.com

Listing Terms and Conditions
Auction Bidder Agreement Bidder and Auctioneer agree that the Terms and Conditions listed below shall govern this Auction sale: 1. All persons seeking to register to bid acknowledges acceptance of these terms of sale, and guarantees prompt payment of all purchases by wire transfer, credit card or company check with bank letter of guarantee. No items will be removed prior to full payment, with all funds having cleared our accounts. 2. The "Bidder" becomes a "Buyer" upon the Auctioneers acceptance of their bid on one or more items in the Auction sale. 3. FULL PAYENT must be made immediately for your purchase at the Auction. This payment should be made in the form of cash, credit card (up to $5,000), company check with bank letter, cashiers check, or wire transfer (wire instructions on request). 4. Items left unpaid for more than 48 hours will be resold at the risk and expense of the Buyer. In the event that a Buyer fails to pay the entire purchase price (in addition to the Buyer's premium and any applicable tax) within 48 hours or otherwise fails to comply with these Terms and Conditions, Auctioneer and the Seller may retain any deposit paid as liquidated damages without notice. Auctioneer and the Seller reserve the right to resell such items without notice, and the defaulting Buyer shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling such items. 5. Auctioneer shall charge and collect from each Buyer a 15% Buyer's premium for each sale at the Auction, in addition to the purchase price as bid. Buyers that utilize our Webcast service shall be charged a buyer's premium of 18% for each sale at the Auction, in addition to the purchaser price. Buyers that pay by credit card will be charged a 3% convenience/credit card fee in addition to any buyers premiums so noted. 6. All items in the Auction shall be sold to the highest bidder; provided, however, that some items may be auctioned with minimum reserve prices, and/or subject to Seller's right of confirmation. Auctioneer reserves the right to reject any bid that is only a minimal increase over the preceding bid, that is not commensurate with the value of the item being offered, or any bid that Auctioneer believes was made illegally or in bad faith. Further, Auctioneer may bid at the Auction either for its own account or on behalf of the Seller or a third party. All sales are final. No returns or refunds will be permitted, unless authorized by the Seller in writing. 7. Collection of applicable taxes will be in accordance with the laws of New York. Auctioneer reserves the right to charge and collect tax on all purchases, shifting the burden of determining any 'tax exempt' status to the purchaser (if applicable). In such case tax refunds will be issued by the respective state. Sales tax for Erie County, NY is 8.75%. 8. For any purchase paid in cash with a value of $10,000 or greater, Buyer is required to complete US Treasury Dept. form #8300 at the time of purchase. 9. Removal and shipment of purchased items will be the sole responsibility of the Buyer. Removal for smalls and hand carry items will be immediately following the sale then Thursday, September 7 through Saturday September 9. Riggers scheduled thereafter by appointment. All purchases must be removed no later than September 16. Riggers are encouraged to review the PDF catalog and submit insurance certificates in advance of the auction. NO MATERIAL HANDLING EQUIPMENT OR TOOLS WILL BE MADE AVAILABLE BY THE SELLER OR AUCTIONEER FOR BUYERS' USE DURING ITEM REMOVAL. All Buyers and/or their agent riggers MUST comply with all insurance requirements as noted in the Auction catalog. 10. The Buyer becomes fully responsible for, and assumes all risk of loss and damage to items immediately upon acceptance of their bid. It shall be the responsibility of the Buyer to insure their purchases immediately. If the Buyer does not remove an item within the announced removal period, Auctioneer and the Seller may, in their sole discretion, deem the item to have been abandoned by the Buyer and the Buyer will have no further rights with respect to the item. 11. In the event of any dispute concerning the winning bid price for an item, the record kept by Auctioneer shall control. In any dispute between two or more bidders, the Auctioneers decision shall be absolute and final. 12. ALL ITEMS ARE SOLD AS IS, WHERE IS AND WITH ALL FAULTS. NEITHER SELLER NOR AUCTIONEER MAKES ANY WARRANTY, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY, VALUE OR CONDITION OF ANY ITEM. AUCTIONEER AND SELLER EXPRESSLY DISCLAIM ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT. 13. No sale shall be invalidated by reason of any defect or inaccuracy in any description or listing, and no liability shall be borne by the Auctioneer with respect to such errors. All information has been obtained from sources generally believed to be reliable, but the accuracy cannot be guaranteed or warranted by the Auctioneer. Bidder acknowledges it is their responsibility to inspect all items and to make their own inquires whether purchasing online via Webcast or live on site. 14. The aggregate respective liability of Seller or Auctioneer in respect of any other loss or damage suffered by a Buyer and arising out of or in connection with these Terms and Conditions or arising out of or in any way connected with a Buyer's participation in the Auction, whether in contract, tort (including negligence) or for breach of statutory duty or in any other way, shall not exceed (i) in the case of the Seller, the amount of the purchase price paid by the Buyer; and (ii) in the case of the Auctioneer, the Buyer's premium paid by the Buyer, in each case in respect of the goods which are the subject of the claim. 15. Computers, drives and other electronic equipment may contain copywritten software that is governed by a license agreement issued to a third party. In such event the Buyer acknowledges that said software and license agreement(s) are not included in their purchase(s). Buyer guarantees the destruction of any personally identifiable information that may be stored on such devices, and shall indemnify and hold harmless the Auction Company and their Seller from any claims, suits or other actions brought against them that relates in any way to personally identifiable information or any other data that remains on such devices, latent or obvious. 16. Buyers acknowledge that an Auction site or the Seller's site is a potentially dangerous place. Flammable, noxious, corrosive and pressurized substances may be present. Heavy equipment may be operated, and electrical circuits may be live. Every person enters such site at his or her own risk with notice of the condition of the premises and the activities that will be or have been conducted on the premises. Buyers shall so advise their agents and employees. No person shall have any claim against Auctioneer, the Seller or their respective agents or employees for any injuries sustained or for damages to or loss of person or property that may occur at such site. 17. These Terms and Conditions are incorporated and merged with any sale specific Terms and Conditions that may be distributed via our online bidding site and or at the physical auction location.
Surplus to the operations of Metal Locking Service, a key provider of cast iron locomotive engine block repairs for GE and Class 1 Railroads (FDL & EVO crankcases), Blackbird Asset Services has been retained to sell the following at auction. The auction of Metal Locking Services surplus has closed.

101
Monarch lathe, 4-jaw chuck, toolpost, tailstock
Monarch 18" x 48" lathe (SN 29135), 4-jaw chuck, toolpost, tailstock, threading, 18-750 RPM, 20.5" swing, 48" between centers

101
Monarch CII engine lathe, 4-jaw chuck, tailstock
Monarch CII 20" x 72" engine lathe, SN: 12808, actual swing 22.5", 4-jaw chuck, tailstock

102
Reed-Prentice tool room lathe, Yuasa tool post
Reed-Prentice 14" x 60" tool room lathe (SN 19023), 18-536 RPM, Yuasa tool post (SN 74-6), 3 jaw chuck, tailstock

103
Rogers IT 36, 36" vertical boring mill
Rogers 36" vertical boring mill model IT 36 (SN 1148), 30" 4 jaw chuck, 5 station turret, 19" under turret

104
Abrasive 3-B surface grinder, magnetic chuck
Abrasive 3-B surface grinder (SN 734), 8" x 22" magnetic chuck

105
Bridgeport series I vertical milling machine
Bridgeport series I vertical milling machine (SN 7588), 2 HP, 9" x 42" T-slot table, power feed

106
Wells Index 747 vertical milling machine, 1.5 HP
Wells Index model 747 vertical milling machine, 1.5 HP, 2 axis Acu-Rite II digital read out (not working), 50" T-slot table, Serial number 18676 (vise in photo not included)

107
Mitts and Merrill #2 Keyseater (SN D2513)
Mitts and Merrill #2 Keyseater (SN D2513)

108
Cincinnati 20" shaper, T-slot box table
Cincinnati 20" shaper, 15" x 14" x 15" T-slot box table

109
Cincinnati Bickford Super Serve drill press
Cincinnati Bickford Super Serve drill press (SN 2L 2706), 24" throat, 19" x 24" T-slot table (vise in photo not included)

110
Toyoda FVN50 vertical machining center, CAT 50
Toyoda FVN50 vertical machining center, CAT 50 taper, 20-position automatic tool changer, 20" x 36" T-slot table, Fanuc Systems 6M control, X=800mm, Y=560mm, Z=560mm, SN: NF1499

111
Rockford F207AS13 28" shaper model
Rockford F207AS13 28" shaper (SN 41 HE 45), 17" x 14" x 17" box table, 10 HP drive

112
Thompson 6 x 18 surface grinder, magnetic chuck
Thompson 6 x 18 surface grinder (SN F41214), 6" x 18" Walker magnetic chuck

113
Baldor pedestal grinder 153C, 1/2 HP, 115 V
Baldor pedestal grinder 153C (SN 461), 1/2 HP, 115 V, 3450 RPM, very heavy steel pedistal

114
Milwaukee horizontal mill #2
Milwaukee horizontal mill #2 (SN A1262H)

115
Cincinnati #2 knee type vertical milling machine
Cincinnati #2 knee type vertical milling machine, 50 taper, SN A1262H

116
Avey twin spindle drill press, M 1/2 heavy
Avey twin spindle drill press (SN A1262H), M 1/2 heavy, 6" throat, 12" x 23" table

117
Milwaukee K #2 horizontal milling machine
Milwaukee horizontal milling machine model K #2, 57" T-slot table

118
Betts double-column boring mill, 96" rotary table
Betts double-column boring mill, 96" rotary table, 4 jaws, 104" between sides (frame opened for 102" swing), right head 5 position turret, left head boring / single tool, operator platform included, no pit required (flush mount)

119
HYD-MECH S-20A band saw, 240V
HYD-MECH S-20A band saw (SN 10196972), 240V, 3 PH, 3 + 2 HP, horizontal pivot band saw, 13"H x 18"W capacity at 90 degrees

121
Cincinnati Bickford Super Service radial drill
Cincinnati Bickford Super Service radial drill, 10" column x 60", 29" x 56" T-Slot table, variable speed, SN: 2E-306

122
Tsudakoma RNCM-401R 4th axis rotary table attach.
Tsudakoma model RNCM-401R 4th axis rotary table attachment, 15 3/4" rotary table, center attachment, 1 1/2" through, SN: 510556

123
Cincinnati Bickford Super Service portable horizon
Cincinnati Bickford Super Service portable horizontal drilling machine, six speed 100-950 RPM, 9" x 60" column, #4MT taper, 10" horizontal spindle travel, 24" column traverse (horizontal on base), 360 degree column swivel, 32" travel of head on colu...

124
Van Norman Perfect-O 999 boring bar, 54"
Van Norman Perfect-O 999 boring bar, 54", SN 20123-P30

125
Van Norman Perfect-O 999 boring bar, 65"
Van Norman Perfect-O 999 boring bar, 65", SN H1007-854

130
6" machine vise
6" machine vise

131
F&D 6" x 1" milling cutter, 1 1/2" arbor
F&D 6" x 1" milling cutter, 1 1/2" arbor, .060" radius on one side, resharpened RE112681

132
F&D 6" x 1" milling cutter, 1 1/2" arbor
F&D 6" x 1" milling cutter, 1 1/2" arbor, .060" radius on one side, resharpened RE112681

133
F&D 6" x 1" milling cutter, 1 1/2" arbor
F&D 6" x 1" milling cutter, 1 1/2" arbor, .060" radius on one side, resharpened RE112681

134
F&D 6" x 1" milling cutter, 1 1/2" arbor
F&D 6" x 1" milling cutter, 1 1/2" arbor, .060" radius on one side, resharpened RE112681

135
F&D 6" x 1" milling cutter, 1 1/2" arbor
F&D 6" x 1" milling cutter, 1 1/2" arbor, .060" radius on one side, resharpened RE112681

136
F&D 6" x 1" cobalt milling cutter, 1 1/2" arbor
F&D 6" x 1" cobalt milling cutter, tin coated, 1 1/2" arbor, staggered tooth, see photo for other cutter specifications, RE-L601004-092

137
F&D cobalt milling cutter, tin coated
F&D cobalt milling cutter, tin coated, see photo for other cutter specifications, SPT-35295-003

138
F&D 6" x 1" milling cutter, 1 1/2" arbor
F&D 6" x 1" milling cutter, 1 1/2" arbor, .060" radius on one side, resharpened RE112681

139
F&D 6" x 1" cobalt milling cutter, 1 1/2" arbor
F&D 6" x 1" cobalt milling cutter, 1 1/2" arbor, 16 staggered tooth, see photo for other cutter specifications, SPL601004-092

140
Lot of misc. milling cutters
Lot of misc. milling cutters

141
Lot of misc. milling cutters
Lot of misc. milling cutters

142
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

143
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

144
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

145
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

146
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

147
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

148
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

149
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

150
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

151
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

152
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

153
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

154
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

155
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

156
(1) Unused 40 taper tool holder as photographed
(1) Unused 40 taper tool holder as photographed

157
Lot of (10) misc. tool holders as photographed
Lot of (10) misc. tool holders as photographed

158
Lot of (10) misc. tool holders as photographed
Lot of (10) misc. tool holders as photographed

159
Lot of (11) misc. tool holders as photographed
Lot of (11) misc. tool holders as photographed

160
Lot of (11) misc. tool holders as photographed
Lot of (11) misc. tool holders as photographed

161
Lot of (11) misc. tool holders as photographed
Lot of (11) misc. tool holders as photographed

162
Lot of (12) misc. tool holders as photographed
Lot of (12) misc. tool holders as photographed

163
Lot of (10) misc. tool holders as photographed
Lot of (10) misc. tool holders as photographed

164
Lot of (10) misc. tool holders as photographed
Lot of (10) misc. tool holders as photographed

165
Lot of (10) misc. tool holders as photographed
Lot of (10) misc. tool holders as photographed

166
Lot of (11) misc. tool holders as photographed
Lot of (11) misc. tool holders as photographed

167
Lot of (11) misc. tool holders as photographed
Lot of (11) misc. tool holders as photographed

168
Lot of (10) misc. tool holders as photographed
Lot of (10) misc. tool holders as photographed

169
Lot of cutting tools and bits as photographed
Lot of cutting tools and bits as photographed

170
Lot of cutting tools and bits as photographed
Lot of cutting tools and bits as photographed

171
Lot of (4) misc. tool holders as photographed
Lot of (4) misc. tool holders as photographed