0A

Terms & Conditions
When you register as a new bidder the credit card you register with will have an authorization check performed. In order to successfully register, the address that you register under must match the address on the credit card. The credit card used for registration will be automatically charged following the auction unless you make payment during the scheduled pick up time. If alternative payment is approved we accept cash, personal or cashier’s checks or wire transfers. Certain purchases such as coins, precious metals and vehicles may require payment by wire transfer or certified cashier’s check ONLY. Please read the description of the items to see if these terms apply to your purchase. All purchases over $300 are subject to payment by bank wire transfer only if the bidder is previously unknown to Paul Auction Co. This is entirely at our discretion. Purchases made by check may be held until your check clears.
10% Buyers Fee applies to all purchases. 3% additional convenience fee when payment is made by credit card. Sales tax of 5.5% is also collected unless you have a seller’s permit on file with Paul Auction Co. Sales tax applies to Buyers fee. You must tell us by phone call or email, prior to the close of auction, if you plan to use a resale number EVEN IF YOU ALREADY HAVE ONE ON FILE WITH US.
$10 Handgun transfer fee for each handgun purchased. All FFL Rules & Regulations apply. Firearms transferred at our facility will only be sold to WI residents of legal age. All other bidders must make arrangements to have the firearm shipped to an FFL holder of their choice. Additional shipping charges will apply to all firearms. Call for clarification.
This auction features an auto bid extend. When a bid is placed in the final 2 minutes of bidding the auction bidding will automatically be extended 2 minutes from the time the bid was placed. ie: If an auction is scheduled to close at 7:00PM, receives a bid at 6:59 the close time will automatically extend two minutes. The auto extend feature remains active until no further bids are received within a 2 minute time frame.
Paul Auction Co. Inc. does not test items for authenticity or suitability. Although every effort is made to objectively describe the merchandise, personal inspection on the part of the bidder is strongly encouraged. Measurements are approximate sizes. If the description does not match the photograph please contact us for clarification. Any item(s) not removed on the scheduled pickup date or dates will be considered abandoned and will be forfeited unless alternate pick up or shipping arrangements were made prior to load out. Shipping is available for certain items; call to confirm. Shipped items will incur a minimum $6.00 materials fee in addition to actual shipping charges. Shipping and packing labor is charged out at $26.00 per hour or fraction thereof. Although some packing material or boxes may be available at Paul Auction Hall, it is recommended that you bring adequate supplies with you.
* All items are sold "AS IS, WHERE IS" with all faults.
* No implied or express warranties.
* All descriptions believed accurate but not warranted.
* Bidder inspection is encouraged.
* By placing a bid, bidder signifies that they have examined the items to their satisfaction, or that they have chosen not to personally examine them.
* Paul Auction Co. Inc. reserves the right to reject any bid at our sole discretion.
* Applicable taxes of 5.5% sales tax will be charged unless a sales tax exemption form is provided.
* Buyer's premium of 10% will be charged. An additional charge of 3% applies to credit card purchases.
* In the event of failure of the online bidding system or other technical failure, Paul Auction Co. Inc reserves the right to cancel and/or reopen the auction. The bidder contract entered into is enforceable between the bidder whose name is registered to the account regardless of who placed the bid and Paul Auction Co. Inc. Bidder and auctioneers agree that the terms listed below shall govern this auction. 1. Full payment shall be made before any items leave the premises. 2. Terms of auction: All auctions and all items are sold absolute regardless of price. Paul Auction Co. Inc. reserves the right to bid on behalf of the 3rd party bidders or as principal. Paul Auction Co. Inc. reserves the right to divide any lot, to combine any two or more lots, or withdraw any lot or lots from the auction. Payment for purchases must be made according to terms of each particular auction. All checks must be made payable to Paul Auction Co. Inc. A Buyers fee will be added to bid price to arrive at the sale price. Sales tax will be applied to buyers fee. All sales are subject to State Sales Tax Laws. Bidder agrees not to stop payment on checks or disallow a sight draft and is responsible for any expenses due to collection of bad checks. Bidder agrees not to pursue charge backs on any credit card payments. 3. NO WARRANTY: The descriptions of items in this auction are believed to be correct. Never the less, neither those descriptions nor any oral statements made by Owner, its Officers, Agents or Employees of auctions concerning any item shall be constructed as a warranty, either express or implied. ITEMS ARE SOLD AS IS - WHERE IS. I, the buyer, have examined this merchandise and accept it the way it is. 4. SETTLEMENT: Must be made at the conclusion of the auction. Nothing is to be removed until settled for. Merchandise becomes the full responsibility of the Buyer at time of purchase, and Buyer assumes all risk of loss and damage to property. Owner and Auctioneers agree that merchandise may remain on the auction premises for a period of time following the auction. The date by which all merchandise must be removed from the premises will be announced by Auctioneer. 5. RESALE: Auctioneers reserve the right to resell any property not paid for in full on auction day. The Buyer shall be responsible to Auctioneers for any expenses of resale and collection and damages resulting from the resale. 6. INJURY & DAMAGE: Bidder acknowledges responsibility for any personal injury or property damage caused by Bidder or his Agent, and further agrees to hold Auctioneers, Owners, its Officers, or Employees harmless for any personal injury to himself or his Agents and any property damage incurred on auction premises. 7. By registering for this auction you give Paul Auction Co. Inc. permission to add you to their mailing list. You can unsubscribe at any time.
 

0B

Inspection Times
Inspection is Monday, April 26 from 2PM-6PM only. All items are available for viewing at N131 County Rd S Kewaskum during this time period.

0C

Merchandise Pick Up
Pick up is scheduled alphabetically for Last name starting with letters A-L on Wednesday, April 28 from 2-6PM and last name M-Z on Thursday April 29 from 2-6PM. It is alright to come on the opposite day if you have a scheduling conflict; you do not need to call ahead to arrange this. You must pick up during these time periods if you intend to pay with cash or check. Customers who do not pick up during the scheduled time period will have their credit card charged after 6PM on Thursday unless other arrangements have been made.

0D

1

Lot of 7 assorted helmets and replacement shields.
As shown.

2

3 box lot of jack stands
As shown

3

6 box lot of asst'd Japanese motorcycle parts
As shown. 

4

Snap On pneumatic drill and 3/8 air ratchet
Cylinder compression testers and other tools.

5

Bostitch finish nailer, NIB
Model N62FN-2

6

2 air hydraulic riveters
Model GP-5055

7

6 asst'd air tools
2 palm sanders, 1/2" Blue Point impact, CP air chisel, Dynabrade sander, DA sander, etc.

8

JAWA engine parts
as shown

9

Super Spool Valve air foot paddle
as shown

10

Harley shovelhead transmission plate
as shown

11

Harley kicker cover
Radial cracks on interior collar.

12

Harley early transmission cover
as shown

13

3 Harley kicker covers
as shown

14

Asst'd Harley transmission cases, covers, gears, etc.
Valves and other parts.

15

Large quantity gaskets and seals
Includes blue point gasket punch set and a adjustable gasket cutter.

16

Large lot of asst'd bike parts
Fuel line, zip ties, etc

17

Large lot of asst'd ignition components
Includes WICO Model 60 magneto analyzer 

18

Harley Sprint engine/tranny with carb
as shown

19

Large quantity of Harley Sprint parts
includes full and partial blocks, covers, heads, cylinders, motor components, exhausts, seal, gauges, transmission gears, motor stand, manyother parts.

20

Motorcycle inner tubes and valve stem parts
as shown

21

Snap On bolt-grip puller set
as shown

22

Westward bearing separator/puller set
as shown

23

Many asst'd motorcycle parts
as shown

24

6 asst'd riding belts
plus gloves, leather caps, etc. There's one pair of glove in particular, probably for a woman due to the hand size, that's a pretty nice pair of vintage gauntlet gloves.

25

Motorcycle seat hardware.
as shown

26

Motorcycle bags and seat trim
as shown

27

5 solo seats
as shown

28

10 motorcycle seats
as shown

29

10 saddle style seats and pans
as shown

30

4 solo seats
as shown

31

Large quantity Harley pan head parts
Includes swing arms, lowers, pistons, heads, exhaust, covers, rocker arms, primary covers, saddle tanks, manifolds, engine components, oil pumps, etc. The oil pump does have a chip out of the casting, as shown.

32

Asst'd frame hardware
as shown

33

Harley cat eye dash
as shown

34

1959 Harley FL dash
as shown

35

Harley dash panels, ignition switches, etc
Includes an interior plate from a cat eye dash.

36

Asst'd motorcycle parts
Brake components and more

37

Asst'd spark plugs
Many NOS, and government contract, some of which are still sealed.

38

Enormous lot of asst'd fasteners
Every nut, bolt and screw you can think of. This is all over the board; some it is almost certainly obscure bike stuff and some of it is from home improvement projects.

39

Asst'd household electrical components
as shown

40

Harley lubricants and related
NOS brake fluid, fork oil, oil filters, plus other brands and products as shown. Trying very hard to come up with a punch line for "fork oil", but so far, nothing.
 

41

NOS Harley metal can 2 cycle oil, full case
only one flap opened, all containers full

42

Tecumseh factory sealed 4 cycle oil case
12/20oz bottles. I believe the bottles are plastic. Like a case of fine wine, this will probably benefit from a few decades of storage.

43

Soo Line railroad pump oil can
by Handlan

44

Large lot of oil cans
Includes, Simmons Blue Jay, McCormick-Deering, Singer, grease cups, grease guns, patent, drain oil pans, etc

45

Linkert M35TP carburetor
fits 47-48 Harley E, EL, F, FL

46

Linkert carb
most info ground off, one end has flange removed

47

Linkert model 31 carb and 2 bowls
plus gas line

48

Linkert model 74 carb
as shown

49

Linkert model 74 carb
bead blasted

50

Linkert model 74 carb
as shown

51

Large quantity Harley and other carbs and parts
carbs, manifolds, floats, jets, new and old.

52

Large qnty Harley & others head and tail lights
New and old includes glass and tombstone tail lights, bulbs. No tombstones lenses.

53

Harley VL & other parts
as shown

54

Harley foot boards
as shown

55

Harley foot boards
bolt repairs, as shown

56

Harley foot boards
rough

57

3 sets of old Harley foot boards
with repro pads

58

Asst'd Harley transmission and engine parts
as shown

59

Large qnty Harley and Indian roller bearings
Tony had these meticulously labeled. Many, but not all are stored in zip locks for moisture protection. 

60

Crank shaft balancing & case lapping tools
includes bearing & seal driver, etc

61

Asst'd Harley Sportster parts
Includes case, heads, cylinders, pistons, engine parts, transmission parts, rocker arm covers, etc

62

Harley Evo cylinders and head
as shown

63

Asst'd motorcycle parts
as shown

64

Early style motorcycle handle bars
as shown

65

Asst'd handle bars and grips
as shown

66

Motorcycle batteries and chargers
includes battery tester and 12v power supply

67

Large qnty custom tools and jigs
Both factory and custom made. Some are single purpose tools made by Tony. 

68

Asst'd motorcycle parts
as shown

69

Asst'd Harley 45 parts
as shown

70

Asst'd cables and controls
plus other loose parts

71

Car and motorcycle license plates
as shown

72

Cloth bound oak machinist's tool chest
Well used. Doesn't appear to be a Gerstner but it's still decent quality.

73

Large lot of machinist and precision tools
Includes dial indicators, telescoping gauges, v blocks, calipers, squares, vernier calipers, rulers, levels, carpenter's level, sine bar, vee vise, inside mic, dial bore, Starrett 24" vernier, Starrett No 98 spirit level, outside mics, feelers, and more. The Vee Vise is a thing of beauty, English made.

74

Set of 3 Lufkin outside mics
1 to 2, 2 to 3, 4 to 5. And an orphan 0-1".

75

Modern Harley cases and covers
as shown

76

Asst'd electric power tools
Makita belt sander, Thor bench grinder, Weller soldering gun, Craftsman grinder, DeWalt pad sander, B&D circle saw, Milwaukee heat gun, Bosch rotary hammer, Pro-Tech chop saw & others. There's also a 1/4" drill in there that was probably used on the Arc.

77

Milwaukee corded Sawzall and 1/2" hold shooter
Not many miles on the Sawzall.

78

10 sets letter and number stamps
as shown

79

Small arbor press
No name but decent quality.

80

Soft tail transmission case
as shown

81

Harley K/KH outer primary cover
as shown

82

Asst'd motorcycle horns
as shown

83

Pair of knucklehead heads
as shown

84

Knucklehead head and cylinder
as shown

85

Knucklehead rocker arm covers
as shown

86

Knucklehead rocker arm covers
as shown

87

Harley Knuckehead engine parts
includes 4 heads, oil filters, rocker arms, metal trim, etc.

88

Files and rasps
Includes 3 wood boxes that have nothing to do with the files or the rasps.

89

Indian Scout engine case, cylinders and heads
Engine # BDI 1734. Only what is shown. 

90

Indian Arrow heads only
as shown

91

Indian Arrow complete motor
Motor #ADI 2516 on stand, only what is shown.

92

Indian primary cover set
as shown

93

Indian Arrow case and head
primary cover, sprockets, oil tank, piston and other parts

94

Linkert M344 carb
for Indian Chief 1941 - 1944

95

Indian wheel hub
as shown

96

Indian transmission tower
as shown

97

Splitdorf magneto
type C DH. Untested

98

Asst'd Indian Chief parts
as shown

99

Indian Chief lower
CDF 4203 B

101

Small engine parts
mostly condensers 

102

Indian motor cycle parts
and other items as shown

103

Assorted starters and generators
includes Trucut armature lathe and growlers

104

large qnty asst'd car parts
NIB Corvette 1988 thru 1996 brake rotors, Mopar 383?, exhaust manifolds, Ford and Chevy alternators, Mopar NIB torque converter, hub caps and other parts. 

105

Ford pick up hood latch
fits 1942, 46 and 47. 

106

1964 Mustang rear tail light
as shown

107

2001 Chevy Suburban 1500 LT
93,000 miles, 4 wheel drive, gold color, front brush guard, no third seat, good rubber, has rust. Must be paid for in full at time of purchase. Bidders previously unknown to Paul Auction Co. may be required to pay by Bank Wire Transfer at the discretion of Paul Auction Co.

108

Suzuki GS850 GL motorcycle
No title. Not running. 

109

BMW R9016 motorcycle 1974
Has title. Not running. 

110

Suzuki GT250 motorcycle
No title. Not running. 

111

Toro 826 snowblower
No title.

112

Motorcycle trailer
Needs work

113

Wagon axle with wheels
incl evener

114

Harley '63 Sprint motorcycle 1963
Has title. Not running. 

115

Harley Baja motorcycle
Couldn't find any identifying info on the bike. Don't know the CC. Frame appears to have been both repaired and modified.No title. Not running. 

116

Harley ? sidecar
as shown

117

Harley 1973 Sprint motorcycle
Has title. Title shows as 1974 but VIN numbers match. Not running. 

118

BSA 250 motorcycle 1970
Has title. Not running. 

119

JLO Sparta motorcycle
No title. Not running. 

120

Wheel Horse 877 lawn tractor
With deck. Not running. 

121

Lawn Boy mower
as shown

122

CZ motorcycle. Sort of.
The Czech Wreck. No title. Doesn't have much of anything else, either. Don't think it runs. 

123

Step and 22' alum extension ladders
as shown

124

Steger coaster wagon
as shown

125

Large lot of motorcycle rims and tires
must take all 

126

4 motorcycle tires
Includes drag tire. The three street tires are all in pretty good shape.

127

Large lot of Sprint rims
Includes a fork.

128

Schwinn boy's bike
as shown 

129

Mechanical motorcycle lift
Includes some other iron that looked like it should go with it. Even if it doesn't.

130

4' iron pulley
It's a big 'un.
 

131

Harley aftermarket side shift tanks
Shows as 1948 thru 1965 panhead

132

Indian Chief tanks
original but rusted

133

Harley tanks
as shown

134

Harley side shift tanks
as shown

135

Harley ? right hand side shift tanks
The gas tank is designed to slip into the oil tank. I can't find these anywhere and it's killing me. If you know what they are and you're willing to share, please do.

136

Lot of 4 Harley Sprint tanks
as shown

137

Lot of 4 Harley Sprint tanks
as shown

138

Barrett B-375 brake shoe grinder
With bonus brake shoes

139

Wheel balancing stand
as shown

140

Asst'd bench top motor stands
as shown

141

Half ton chain fall
as shown

142

Triumph transmission and parts
as shown 

143

Harley and other speedometers, tachometers and asst'd gauges
as shown

144

Somebody's project carb
as shown 

145

Ford Model A odometer
as shown

146

Benneli 250 and other parts
as shown 

147

Harley shovelhead half case, cylinders and tank
as shown 

148

Asst'd motorcycle chains
And NOS Harley chain tool, etc. 

149

Asst'd motorcycle parts
as shown 

150

Entire table top full of NOS and other Sprint parts
Mostly Sprint. Most marked Made in Italy. It's a big lot.

151

Table top plus of NOS and other Harley parts
Not all boxes are full, this table runs new to old. 

152

6" Snap On swivel base bench vise
Good condition, with jaw protectors. It's probably a rebranded Wilton but I can only image what a 6" Snap-On vise costs from the distributor.

153

4.5" Wilton swivel base bench vise
with jaw protectors, good condition

154

3.5" Wilton swivel base bench vise
Surface rust, but will clean up. 

155

Home made anvil
16.5". They did a decent job. 

156

3.5" Gyro-Vise #73.5
as shown

157

4" drill press vise
as shown

158

Lot of 4 asst'd vises
includes Wilton 4" and others. 

159

Snap On tap and die set
TD-2425

160

Blue Point tap and die set
GA541

161

Lot of asst'd older tools
tap and die set, antique hand tools, etc. 

162

Magnablocks
V and flat. Excellent condition. Probably because he didn't own a surface grinder.

163

Snap On steering wheel tool, clutch aligner set, bearing driver set
as shown

164

Blue Point armature reconditioning tool
Model AT-2

165

2 Snap On timing lights
model MT212 and another. 

166

Lot of asst'd wrenches
Mostly American made. 

167

Lot of all Craftsman wrenches
Sets and loose

168

Set of Snap On combination wrenches
5/16" thru 1 1/4" 

169

Set of Snap On combination wrenches
3/8" thru 1"

170

Snap on combination wrenches
6mm thru 19mm, missing 7 and 8mm

171

Snap on combination wrenches
10mm thru 18mm, short handle 

172

Snap On metric and standard flare nut wrenches
as shown

173

Snap On half moon and other wrenches
1/2" wrench has been altered. 

174

Mixed Snap On wrenches
crows foot, spline shaft, ignition, tappet, and specialty wrenches

175

Snap On 1/4" ratchet set and picks
includes standard and deep socket, swivel socket, extensions, 6 point, 8 point. 

176

Snap On 3/8 drive ratchet set
Includes swivel ratchet, extensions, 12pt standard fractional sockets, 6pt standard fractional sockets, allen sockets, 12pt fractional deep sockets, 12pt metric deep sockets, Torx head, standard and metric swivel sockets, oiler filter strap, and other parts.

177

Snap On 1/2" drive socket set
includes ratchet, breaker bar, extensions, fractional 6pt sockets 3/8 thru 1.5", fractional deep sockets thru 1 1/8, and impact sockets thru 1", etc. 

178

Snap On foot pound and inch pound torque wrenches and impact drivers
200 foot pounds, 200 inch pounds. 

179

Mac 3/8 drive deep socket set
as shown 

180

Asst'd impact and other sockets
various brands

181

6 Owatonna torque adapters and other socket sets
includes nice Matco 1/2" ratchet wrench, etc. 

182

All the orphan sockets and wrenches
Mostly imported. Good loaners for when your brother in law wants to borrow your tools.

183

Crescent, pipe and Channel Lock wrenches
Yes, I know they're called adjustable wrenches and parallel jaw wrenches. 

184

4 pc Gear puller set
as shown 

185

Blue Point tin snip set
as shown 

186

Asst'd pullers
as shown 

187

Blue Point, Snap On, Mac snap ring pliers
as shown 

188

Asst'd tire spoons and pry bars
Some Snap On 

189

Snap On Phillips and slot screw drivers
as shown 

190

Wire strippers and crimping tools.
as shown 

191

Asst'd screw drivers
as shown 

192

asst'd pliers
as shown 

193

Asst'd C clamps and vise grips
as shown 

194

Asst'd hand tools
includes tubing benders, flaring kits, picture frame clamps, saw sets, brake spring pliers, ball joint separators, etc. 

195

Blue Point drill index, Snap On screw extractor, reamers, etc
The Triumph drill index at the far back is empty.

196

Hammers, spanner wrenches and a come along
as shown 

197

Hammers and other hand tools
includes auto body hammers and dollys, lead, brass copper and leather hammers, ball peen hammers, hand saws, hack saws, diagnostic stethescope and other tools. 

198

Lots of Allen wrenches
Includes ball end and T handle 

199

Asst'd shop materials
includes lashing wire, abrasive paper, honing stones, freon tank conversion kit, casters, and the only Kirby vacuum cleaner flexible shaft tool I've ever seen. 

200

Punches and chisels
pop rivet guns and other tools. 

201

Large lot of misc shop materials
pad locks, staplers, brushes, caulk guns, and much more. 

202

RotoZip Rebel tool
As seen on TV.

203

Asst'd Harley gas tanks
Two pair and 4 rights. The black pair on lower left have been altered. They originally looked like the tanks in lot #135 but somebody cut off the male part and welded it off flat. Also, at least two of the mounting brackets are missing. This specific pair have interior rust. The others are fairly clean but not perfect.

204

Lot of asst'd Harley gas tanks
as shown 

205

Lot of asst'd motorcycle gas tanks and trim parts
Top right is a Yamaha. Bottom left is a Sears Allstate.

206

Fender hardware and other trim pieces and other sheet metal
as shown 

207

Lot of asst'd Harley hinged fenders and parts.
as shown 

208

Asst'd Harley fenders
as shown 

209

Asst'd Indian ? fenders
as shown 

210

Lot of misc asst'd fenders and chain guards
as shown 

211

1916 Harley Davidson invoices
as shown 

212

1915 Harley Davidson Service Dept letter
as shown 

213

3 asst'd radiators
as shown 

214

1 ton Cyclone chain fall
Chisholm-Moore 

215

Leather riding chaps
as shown 

216

Wrangler denim vest with Union Riders MC patch
As a bonus, you get Tony's roach clip. 

217

Leather motorcycle jacket
Rough shape. If you have the cajones to wear this relic, nobody will mistake you for a newbie.

218

Tony's leather motorcycle jacket
Already broken in for you

219

BAC DM 32 flow over cold parts cleaner
with accessories

220

Home made anvil on stand
20". Somebody put some time and effort into this.

221

Wissota arbor grinder/wire wheel on stand
as shown 

222

Bench top drill press on base
as shown 

223

20gl shop vac
as shown 

224

Coleman 11gl portable air compressor
as shown 

225

Metzeler Perfect ME77 4.00-18 64H new tire
rear wheel

226

Motorcycle Drag Race poster
looks legit to me

227

Indian motorcycle windshield advertisement
ca 1925 

228

Oshkosh motorcycle race poster
Over all good, but corner cut out. 

229

1971 Rupp Hustler mini bike
These are all the pieces we have. I can't guarantee that they all actually go with it but you're getting them anyway. We got the hard part, you just need to finish it. 

230

Harley Sportster front end
as shown 

231

2 NOS Cerrani forks
one still wrapped 

232

asst'd Japanese bike parts
includes Yamaha motor, Suzuki fork, 2 1960's NOS forks. 

233

large lot of Harley frame and suspension parts
includes forks, springs, tubes, brakes, swing arms, crash bars and much more

234

Bultaco motor and other loose parts
as shown 

235

motorcycle windshield and canvas fairing
as shown

236

Ducati ? motor
I fall down a lot of rabbit holes when I'm researching an auction and while I was looking into something else I thought I saw this motor attributed to Ducati. Unfortunately I didn't make a note and now I cant find it again.

237

Ducati 350 motor and loose parts
as shown 

238

Ducati 160 motor
as shown 

239

box of new Ducati ? parts
ordered from Domi Racer, as shown

240

BSA disassembled motor and parts
as shown 

241

asst'd odds and ends motorcycle parts
as shown 

242

English motorcycle motor parts
as shown 

243

2 Pannonia engines.
Hungarian. Took me forever to figure out what they are.

244

2 Maytag gas engines
model 11 and model 31

245

3 Briggs and Statton engines
2 model Y kick start, 1 model N

246

Pneumatic lift motorcycle work stand
Lift mechanism untested.

247

large lot of Harley fly wheels
dolly NOT included

248

Portable air tank
These are handy to have around.

249

Millermatic 200 CV DC welding power source/wire welder
with tank

250

RamAir 60gl ? vert air compressor
Dolly NOT included

251

small oxy/acetylene tanks set
with cutting torch 

252

Superior model JCP cylinder hone
With many stones. Dolly NOT included. 

253

Home made screw press
Well made. Dolly NOT included.

254

Bench top sand blast cabinet
Good condition. Extra media included. Gray cabinet NOT included. 

255

Rolling work station cabinet
Blaster not included. Your just going to pile it up with junk anyway. 

256

MAC 4 drawer tool chest
table NOT included

257

Sioux model 645 valve grinder and seat grinder
Lots of extras include pneumatic and manual overhead valve spring compressors, cylinder hones, ridge reamer, and ring compressors. 

258

22" iron base work table
home made

259

large lot of exhaust pipes
as shown 

260

asst'd hubs, spokes, axels, spoke nuts, etc
includes some re-done, powder coated hubs

261

1971 Harley Sprint frame
Aermacchi 

262

Snap On 2 ton floor jack
rusty, but works

263

2 emergency jacks
If one doesn't work, maybe the other one will.

264

7 powder coated rims
16"

265

Remnants of a Rockwell drill press
Could probably be restored but an excellent cast iron base for another purpose. Bench grinder? Dolly NOT included 

266

foot operated brake riveter
plus 2 hand riveters 

267

Troyke BH 12" rotary table
Dolly NOT included

268

1946 Indian Chief motorcycle
With clean, clear title. History unknown. I think this was used in the Mad Max movies. Not running. Bidders not known to us must pay by bank wire transfer ONLY.

269

Cushman Highlander scooter
late 50'/early 60's. A bit of a project, but worth the effort. 

270

3 piece Snap On tool chest
The center piece of Tony's living room. 

271

Kennedy rolling chest with generic top cabinet
top cabinet cover is unattached 

272

Rolling work cart
Let's be honest, this is just rolling storage. 

273

Rolling shop cart with small parts cabinet
as shown 

274

Harley Heritage ? front end
fork and bars, fender, wheel and tire. 

275

2 electric motors
Half & 3/4 HP.

276

Napa wheel balancer
no instructions, but you shouldn't need any

B