Murry Communities Construction - Tool & Hardware - Lanc., PA
Previous Page Listing ID#: 1618353

Auction Location

Lancaster, PA 17601
Auction Dates and TimesSALE IS COMPLETED
Bidding Starts: Wednesday May 1
Bidding Ends: Tuesday May 21
Auction Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
Hess Auction Group

Contact: John M. Hess
Phone: (717) 664-5238
Email: contact@hessauctiongroup.com
Website: www.hessauctiongroup.com

GoToAuction.com ID#: 6361
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
John M. Hess Auction Service, Inc. - 717-664-5238 Address: 750 Enterprise Way Lancaster, PA 17601 Pickup Date: Wednesday, May 22nd from 9am - 3pm. **All items MUST be picked up on the stated pickup date. No exceptions can be made. Hess Auction Group will not be able to hold items past the stated pick up date(s). Buyers will be charged full amount and will forfeit the items if they are not picked up on the stated pick up dates. There will not be assistance for loading or moving items. Please come prepared. Any Prospective Bidder (hereinafter referred to as Bidder and sometimes Buyer) who bids on any item, hereby agrees to these Conditions of Sale of John M. Hess Auction Service, Inc. (also d/b/a Conestoga Auction Company, Hess Auction Group) (hereinafter referred to as the Auction Company) relative to property being offered for sale at auction. These Conditions of Sale and all other contents of the catalog are subject to amendment by the Auction Company by the posting of notices or by oral announcements made. Auction Company has made every effort to catalog and correctly describe the property to be sold, however, all lots are sold 'AS IS' and should be examined prior to bidding. Flaws and imperfections caused in the making are not noted. Expect normal wear and oxidation on antique metal wares and crazing and normal glaze loss on pottery and ceramics. Any additional condition questions should be made 24 hours prior to the start of the auction to allow for our staff to review the items. In all matters, the records of the Auction will be final. By participating in any sale, the Bidder agrees to be bound by the following terms and conditions: A. This Auction has a 15% Buyers Premium B. BIDDING INCREMENTS: The auctioneers will be using set bid increments. If you have placed absentee bids that do not follow the set increments, your bid will be executed at the set lower increment. C. ON-LINE BIDDING: Auction Company will not be responsible for any omissions, errors or slow communications. D. PAYMENT: Payment must be made prior to removal from the auction house. Failure to do so may result in forfeiture of items. E. Credit Cards will be processed within 1 hour of the auction or 8:am the following business day F. SHIPPING: No shipping G. AS IS: Bidder agrees that before the Sale, Bidder or Bidder's agents should inspect the property before bidding to determine its condition, size and whether or not it has been repaired or restored. Bidder is responsible for satisfying himself or herself concerning the condition of the property and the matters referred to in the Catalog. Condition reports, photos and video or digital images are provided as a courtesy and should not be used as a substitute for viewing the items in person. All statements made in the catalog or in the condition report or made orally or in writing elsewhere are statements of opinion and are not to be relied on as statements of fact. Auction Company and the underlying owner of the property being sold ('Owner') assume no risk, liability or responsibility for the authenticity of the authorship of any property identified in this catalog. All property is sold "as is" and neither Auction Company nor the Owner make any warranties or representations of any kind or nature with respect to the property being sold, and no statement in the catalog or made at the sale, or in the bill of sale or invoice or elsewhere shall be deemed an assumption of liability or warranty or representation as to the description, genuineness, attribution, provenance or condition of the property. Auction Company and the Owner make no representations as to whether Bidder acquires any reproduction rights in the property being sold at the Sale. H. Withdrawal. Auction Company reserves the right to withdraw any property before sale and shall have no liability for such withdrawal. I. Bid Per Lot. Unless otherwise announced by the auctioneer, all bids are per lot as numbered in the Catalog. J. Video or digital images. At some auctions a video or digital screen may be used. Auction Company is not liable for any errors in the operation or quality of the image presented. K. Reserves. Unless the sale is advertised and announced as a sale without reserves, each lot may be offered subject to reserve. Auction Company may implement such reserves by bidding through its representatives on behalf of the Owner. L. Bidding. Auction Company reserves the right to reject a bid from any bidder. The auctioneer has the right to split any bidding increment and to advance the bidding in any manner as the auctioneer may decide. The highest bidder acknowledged by the auctioneer shall be the buyer. In the event of any dispute between bidders, the auctioneer shall have sole and final discretion either to determine the successful bidder or to re-offer and resell the article in dispute. If any dispute arises after the sale, the sale record of Auction Company shall be conclusive in all respects. M. Auctioneer's Discretion. If the auctioneer determines that any opening bid is not commensurate with the value of the article offered, he may reject the same and withdraw the article from the sale. If having accepted an opening bid, the auctioneer decides that any advance thereafter is not of sufficient amount, he may reject the advance. N. Successful Bid. On the fall of the auctioneer's hammer, title to the offered lot will pass from Owner to the highest bidder acknowledged by the auctioneer, subject to these Conditions of Sale set forth herein, and such bidder (a) assumes full risk and responsibility therefore (b) if requested will sign a confirmation of purchase and (c) will pay the purchase price in full or such part as Auction Company may require for all lots purchased. O. Collateral/Security. The Buyer grants Auction Company a security interest in the purchase property and Auction Company may retain as collateral security for the Bidder's obligations to Auction Company any property or monies held or received by Auction Company for the account of the Bidder. Payment will not be deemed to have been made in full until Auction Company has collected funds represented by checks, or, in the case of bank or cashier?s checks, until Auction Company has confirmed their authenticity. Bidder agrees that a 1-1/2% per month late charge will be imposed on the total purchase price if payment is not made in accordance with all of the conditions set forth herein and agrees to pay any returned check charges that may be incurred. P. Non-Payment. If the Bidder does not make full payment for the purchases within the time required, Auction Company is authorized in its absolute and sole discretion to exercise one or more of the following remedies, in addition to other remedies available to Auction Company and the Owner: Auction Company is authorized to: (a) hold the buyer liable for the total purchase price; (b) cancel the sale, retaining as liquidated damages all payments made by the Buyer; (c) resell the property at public auction or private sale with terms that Auction Company deems appropriate; (d) to resell the property at public auction without reserve and the Buyer shall be liable for any deficiency, cost, handling charges and the expenses of both sales and the commissions on both sales; (e) to offset the full purchase price against any amount owed by Auction Company to the Buyer; (f) to not allow any bids at any upcoming auctions by or on behalf of the Buyer; and (h) to take other actions as Auction Company find necessary and appropriate. The Buyer grants Auction Company a security interest in any property in Auction Company?s possession which is owned by such Buyer and Auction Company is authorized to hold such property as collateral security for such Buyer?s obligations. Buyer shall be liable to Auction Company for all other charges incurred because of Buyer's non-payment, including attorney fees, expenses and incidental damages. As between Auction Company and Owner, if the successful bidder does not pay for the property, collection procedures shall be the responsibility of the Consignor and not Auction Company. Q. Limitation of Liability. If, for any reason a purchased lot cannot delivered in the same condition as at the time of sale, or should any purchased lot be stolen, miss-delivered or lost prior to delivery, Auction Company shall not be liable for any amount more than that paid by the buyer. R. Governing Law and Jurisdiction. The Conditions of Sale, as well as the Buyer's, Owner's and Auction Company's respective rights and obligations shall be governed, construed and enforced in accordance with the laws of the State of Pennsylvania. All persons participating in any auction sale, whether as bidder or consignor, whether present in person or by agent, or by absentee bid, order bid, telephone, internet or other means, consent to the exclusive jurisdiction of the state courts located in Lancaster County, Pennsylvania. S. Severability. If any part of the Conditions of Sale is found by any court to be invalid, illegal or unenforceable, that part shall be discounted and the rest of the conditions shall continue to be valid to the fullest extent of the law. NOTE: Condition reports, photos and video or digital images are provided as a courtesy and should not be used as a substitute for viewing the items in person. All items are sold "as is" in accordance with the Conditions of Sale. YOUR BIDDING ACKNOWLEDGES YOUR ACCEPTANCE OF THESE CONDITIONS OF SALE.
Listing Information
Shop Equipment/Tools: Bridgewood BW-16 Table Saw, Bridgewood Dust Collector, Craftsman Radial Arm Saw, Bridgewood Shaper, Bridgewood Jointer, Rockwell Drill Press, Minimax L55 Belt Sander, Hitachi Miter Saw, scaffolding and many more items too numerous to mention! Hardware/Windows: Large selection of hardware, door latches, blind hinges, deadbolt latches, door knob parts, flush mount ceiling lights, screen doors, vinyl replace windows and more!

1000
BUYER'S NOTE:
Woodworking equipment is in very good working order with most pieces having minimal use. Power to equipment will be disconnected by seller prior to pick-up.

1001
16 " Bridgewood BW-16 Table Saw
9" L, including 2 extensions. 220V, 3 phase electric. 7-1/2 HP motor. Manuf. March 1988.

1098
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1002
Bridgewood Dust Collector
110V operation. Missing duct work or hose.

1099
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1003
Bridgewood 2 HP Dust Collector
110V operation. Good appearing condition. Missing hoses.

1100
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1004
Craftsman 10 " Radial Arm Saw
Expected signs of use.

1101
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1005
(4) Saw Horses
Ranging 30'' - 46'' L. Normal signs of use.

1102
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1006
Bridgewood Shaper
39'' L. 1" spindle. 230V operation. Includes metal tool box with accessories.

1103
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1007
Bridgewood 6" Jointer
45'' L. 110V operation.

1104
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.


1105
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1009
Walnut Partially Finished Lumber
Assorted lengths and widths.

1106
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1010
(3) Poplar Posts
Avg. 5 1/2'' x 7 1/2'' with largest 48" H.

1107
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1011
Rockwell Drill Press
69'' H. 110V operation.

1108
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1012
Bridgewood 20 " Planer
230V operation. BUYER'S NOTE: VERY HEAVY. Bring appropriate labor, transport and tools. Forklift available. Planer located in room by loading dock.

1109
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1013
Bridgewood 12" Jointer
81" L. 230V operation.

1110
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1014
Rockwell 10 " Table Saw
41'' L. 110V operation.

1111
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.


1112
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.


1113
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1017
SCMI 21 " Band Saw
6 HP motor. 220V operation.








1021
(2) Couple-Mates
New appearing condition. Original boxes.

1118


1023


1024
Delta Wet Grinder
Expected signs of use.

1120
Damaged Scaffolding Cross Braces
Assorted sizes are bent, damaged and separated.

1025
Crafted Workbench
97 1/2'' L x 42 1/2'' W. Expected use and wear.

1121
(3) Cable Blocks
Some showing weld repair.

1026
21 " Pedestal Floor Fan
Normal signs of use.




1028
(4) Walnut Boards
8'' W x 1" D x 48" L (avg.). Rough cut ends.


1029
Minimax L55 Belt Sander
120" L. 230V operation.


1030
(2) 40 " Quick Clamps
Expected signs of use.








1034
(7) Assorted Bar Clamps
Ranging 36'' - 55'' L.


1035
Partially Finished Walnut Boards
Avg. 7" W. Largest, 120" L.








1039
(9) Walnut Boards
Ranging 5 1/2'' - 6 1/2'' W x 1" D. Largest, 102'' L.




1041
(6) Walnut Boards
1'' x 6'' x 96'' L.

1137
(1) Section of 4-1/2 Ft. Scaffolding
Includes 2 bucks and four 7' cross braces.

1042
(Approx. 24) Rough Cut Walnut Boards
Avg. 1-1/4'' D x 4-8" W. Avg. 60" L.

1138
(1) Section of 4-1/2 Ft. Scaffolding
Includes 2 bucks and four 7' cross braces.

1043
Hitachi 16 " Miter Saw
Includes assorted blades.

1139
(1) Section of 4-1/2 Ft. Scaffolding
Includes 2 bucks and four 7' cross braces.

1044
Wall Mounted Hardware Organizer with Hardware
17 1/2'' W x 19'' H. Buyer needs to remove from wall.

1140
(1) Section of 4-1/2 Ft. Scaffolding
Includes 2 bucks and four 7' cross braces.


1141
(1) Section of 4-1/2 Ft. Scaffolding
Includes 2 bucks and four 7' cross braces.




1143
(28) Wood Scaffold Planks
Avg. 8' L. Normal signs of use.




1145
Pine Plank
84" L x 10 3/4'' W x 1 1/4'' D.


1146
(11) Pine Plank Cut-Offs
29'' L x 10 1/2'' W x 1 1/4'' D.



1052
Millers Falls 18C Fore Plane
Good condition. Original box.


1053
Electronic Heat Gun
New appearing condition. Original box.


1054
Imported 1/4" and 3/8" Drive Socket Set
Appears complete in metal case.

1150
1-1/4" Coupling Pins
3/4 full bucket.






1153




1155

1060
Bridgewood Planer Set-Up Gauge
Includes wooden case. Good appearing condition.

1156
1-1/4" Coupling Pins
1/2 full bucket.

1061
Biesemeyer T-Square
Good appearing condition.

1157
1-1/4" Coupling Pins
Partially full plastic bin.


1158
Scaffolding Lock Pins
1/2 full bucket.

1063
(2) Grizzly Carbide Shaper Blades
2 1/4'' D. Model G1717.

1159
(8) Interior Doors
Ranging 29" - 30'' W. Good used condition.

1064
Porter Cable Profile Sander
Includes fitted case with pads, profile plates and profile mounting plates.



1161
Fabricated Steel Ladder
79'' L x 18 1/2'' W.

1066

1162
(2) Pine Loading Ramps
94'' L x 11'' W.


1163
Laminate Boards
Avg 40'' L x 13'' W. Particle board construction.

1068
Chalk Lines with Chalk and Chip Brushes
Brushes and some chalk lines are new in original packaging.


1069
14 " Carbide Tip Blade
New appearing condition.

1165
(2) 4-1/2 Ft. Scaffolding Sections
Includes 2 bucks and 4 cross braces.

1070
16 " Carbide Tip Blade
New appearing condition.

1165
(2) 4-1/2 Ft. Scaffolding Sections
Includes 2 bucks and 4 cross braces.

1071
Iridium File Set
Good appearing condition.

1165
(2) 4-1/2 Ft. Scaffolding Sections
Includes 2 bucks and 4 cross braces.

1072
Assorted Freud 9-1/2 " Dado Knives
New appearing condition.

1165
(2) 4-1/2 Ft. Scaffolding Sections
Includes 2 bucks and 4 cross braces.


1165
(2) 4-1/2 Ft. Scaffolding Sections
Includes 2 bucks and 4 cross braces.



Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend







Sponsored Links

Murry Communities Construction - Tool & Hardware - Lanc., PA

Hess Auction Group

Hess Auction Group


Contact: John M. Hess
Phone: (717) 664-5238
Sale Location
750 Enterprise Way
Lancaster, PA 17601
Sale Dates and Times
Sale Terms and Conditions
John M. Hess Auction Service, Inc. - 717-664-5238 Address: 750 Enterprise Way Lancaster, PA 17601 Pickup Date: Wednesday, May 22nd from 9am - 3pm. **All items MUST be picked up on the stated pickup date. No exceptions can be made. Hess Auction Group will not be able to hold items past the stated pick up date(s). Buyers will be charged full amount and will forfeit the items if they are not picked up on the stated pick up dates. There will not be assistance for loading or moving items. Please come prepared. Any Prospective Bidder (hereinafter referred to as Bidder and sometimes Buyer) who bids on any item, hereby agrees to these Conditions of Sale of John M. Hess Auction Service, Inc. (also d/b/a Conestoga Auction Company, Hess Auction Group) (hereinafter referred to as the Auction Company) relative to property being offered for sale at auction. These Conditions of Sale and all other contents of the catalog are subject to amendment by the Auction Company by the posting of notices or by oral announcements made. Auction Company has made every effort to catalog and correctly describe the property to be sold, however, all lots are sold 'AS IS' and should be examined prior to bidding. Flaws and imperfections caused in the making are not noted. Expect normal wear and oxidation on antique metal wares and crazing and normal glaze loss on pottery and ceramics. Any additional condition questions should be made 24 hours prior to the start of the auction to allow for our staff to review the items. In all matters, the records of the Auction will be final. By participating in any sale, the Bidder agrees to be bound by the following terms and conditions: A. This Auction has a 15% Buyers Premium B. BIDDING INCREMENTS: The auctioneers will be using set bid increments. If you have placed absentee bids that do not follow the set increments, your bid will be executed at the set lower increment. C. ON-LINE BIDDING: Auction Company will not be responsible for any omissions, errors or slow communications. D. PAYMENT: Payment must be made prior to removal from the auction house. Failure to do so may result in forfeiture of items. E. Credit Cards will be processed within 1 hour of the auction or 8:am the following business day F. SHIPPING: No shipping G. AS IS: Bidder agrees that before the Sale, Bidder or Bidder's agents should inspect the property before bidding to determine its condition, size and whether or not it has been repaired or restored. Bidder is responsible for satisfying himself or herself concerning the condition of the property and the matters referred to in the Catalog. Condition reports, photos and video or digital images are provided as a courtesy and should not be used as a substitute for viewing the items in person. All statements made in the catalog or in the condition report or made orally or in writing elsewhere are statements of opinion and are not to be relied on as statements of fact. Auction Company and the underlying owner of the property being sold ('Owner') assume no risk, liability or responsibility for the authenticity of the authorship of any property identified in this catalog. All property is sold "as is" and neither Auction Company nor the Owner make any warranties or representations of any kind or nature with respect to the property being sold, and no statement in the catalog or made at the sale, or in the bill of sale or invoice or elsewhere shall be deemed an assumption of liability or warranty or representation as to the description, genuineness, attribution, provenance or condition of the property. Auction Company and the Owner make no representations as to whether Bidder acquires any reproduction rights in the property being sold at the Sale. H. Withdrawal. Auction Company reserves the right to withdraw any property before sale and shall have no liability for such withdrawal. I. Bid Per Lot. Unless otherwise announced by the auctioneer, all bids are per lot as numbered in the Catalog. J. Video or digital images. At some auctions a video or digital screen may be used. Auction Company is not liable for any errors in the operation or quality of the image presented. K. Reserves. Unless the sale is advertised and announced as a sale without reserves, each lot may be offered subject to reserve. Auction Company may implement such reserves by bidding through its representatives on behalf of the Owner. L. Bidding. Auction Company reserves the right to reject a bid from any bidder. The auctioneer has the right to split any bidding increment and to advance the bidding in any manner as the auctioneer may decide. The highest bidder acknowledged by the auctioneer shall be the buyer. In the event of any dispute between bidders, the auctioneer shall have sole and final discretion either to determine the successful bidder or to re-offer and resell the article in dispute. If any dispute arises after the sale, the sale record of Auction Company shall be conclusive in all respects. M. Auctioneer's Discretion. If the auctioneer determines that any opening bid is not commensurate with the value of the article offered, he may reject the same and withdraw the article from the sale. If having accepted an opening bid, the auctioneer decides that any advance thereafter is not of sufficient amount, he may reject the advance. N. Successful Bid. On the fall of the auctioneer's hammer, title to the offered lot will pass from Owner to the highest bidder acknowledged by the auctioneer, subject to these Conditions of Sale set forth herein, and such bidder (a) assumes full risk and responsibility therefore (b) if requested will sign a confirmation of purchase and (c) will pay the purchase price in full or such part as Auction Company may require for all lots purchased. O. Collateral/Security. The Buyer grants Auction Company a security interest in the purchase property and Auction Company may retain as collateral security for the Bidder's obligations to Auction Company any property or monies held or received by Auction Company for the account of the Bidder. Payment will not be deemed to have been made in full until Auction Company has collected funds represented by checks, or, in the case of bank or cashier?s checks, until Auction Company has confirmed their authenticity. Bidder agrees that a 1-1/2% per month late charge will be imposed on the total purchase price if payment is not made in accordance with all of the conditions set forth herein and agrees to pay any returned check charges that may be incurred. P. Non-Payment. If the Bidder does not make full payment for the purchases within the time required, Auction Company is authorized in its absolute and sole discretion to exercise one or more of the following remedies, in addition to other remedies available to Auction Company and the Owner: Auction Company is authorized to: (a) hold the buyer liable for the total purchase price; (b) cancel the sale, retaining as liquidated damages all payments made by the Buyer; (c) resell the property at public auction or private sale with terms that Auction Company deems appropriate; (d) to resell the property at public auction without reserve and the Buyer shall be liable for any deficiency, cost, handling charges and the expenses of both sales and the commissions on both sales; (e) to offset the full purchase price against any amount owed by Auction Company to the Buyer; (f) to not allow any bids at any upcoming auctions by or on behalf of the Buyer; and (h) to take other actions as Auction Company find necessary and appropriate. The Buyer grants Auction Company a security interest in any property in Auction Company?s possession which is owned by such Buyer and Auction Company is authorized to hold such property as collateral security for such Buyer?s obligations. Buyer shall be liable to Auction Company for all other charges incurred because of Buyer's non-payment, including attorney fees, expenses and incidental damages. As between Auction Company and Owner, if the successful bidder does not pay for the property, collection procedures shall be the responsibility of the Consignor and not Auction Company. Q. Limitation of Liability. If, for any reason a purchased lot cannot delivered in the same condition as at the time of sale, or should any purchased lot be stolen, miss-delivered or lost prior to delivery, Auction Company shall not be liable for any amount more than that paid by the buyer. R. Governing Law and Jurisdiction. The Conditions of Sale, as well as the Buyer's, Owner's and Auction Company's respective rights and obligations shall be governed, construed and enforced in accordance with the laws of the State of Pennsylvania. All persons participating in any auction sale, whether as bidder or consignor, whether present in person or by agent, or by absentee bid, order bid, telephone, internet or other means, consent to the exclusive jurisdiction of the state courts located in Lancaster County, Pennsylvania. S. Severability. If any part of the Conditions of Sale is found by any court to be invalid, illegal or unenforceable, that part shall be discounted and the rest of the conditions shall continue to be valid to the fullest extent of the law. NOTE: Condition reports, photos and video or digital images are provided as a courtesy and should not be used as a substitute for viewing the items in person. All items are sold "as is" in accordance with the Conditions of Sale. YOUR BIDDING ACKNOWLEDGES YOUR ACCEPTANCE OF THESE CONDITIONS OF SALE.
Listing Details
Shop Equipment/Tools: Bridgewood BW-16 Table Saw, Bridgewood Dust Collector, Craftsman Radial Arm Saw, Bridgewood Shaper, Bridgewood Jointer, Rockwell Drill Press, Minimax L55 Belt Sander, Hitachi Miter Saw, scaffolding and many more items too numerous to mention! Hardware/Windows: Large selection of hardware, door latches, blind hinges, deadbolt latches, door knob parts, flush mount ceiling lights, screen doors, vinyl replace windows and more!

1000
BUYER'S NOTE:
Woodworking equipment is in very good working order with most pieces having minimal use. Power to equipment will be disconnected by seller prior to pick-up.

1001
16 " Bridgewood BW-16 Table Saw
9" L, including 2 extensions. 220V, 3 phase electric. 7-1/2 HP motor. Manuf. March 1988.

1098
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1002
Bridgewood Dust Collector
110V operation. Missing duct work or hose.

1099
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1003
Bridgewood 2 HP Dust Collector
110V operation. Good appearing condition. Missing hoses.

1100
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1004
Craftsman 10 " Radial Arm Saw
Expected signs of use.

1101
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1005
(4) Saw Horses
Ranging 30'' - 46'' L. Normal signs of use.

1102
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1006
Bridgewood Shaper
39'' L. 1" spindle. 230V operation. Includes metal tool box with accessories.

1103
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1007
Bridgewood 6" Jointer
45'' L. 110V operation.

1104
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.


1105
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1009
Walnut Partially Finished Lumber
Assorted lengths and widths.

1106
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1010
(3) Poplar Posts
Avg. 5 1/2'' x 7 1/2'' with largest 48" H.

1107
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1011
Rockwell Drill Press
69'' H. 110V operation.

1108
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1012
Bridgewood 20 " Planer
230V operation. BUYER'S NOTE: VERY HEAVY. Bring appropriate labor, transport and tools. Forklift available. Planer located in room by loading dock.

1109
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1013
Bridgewood 12" Jointer
81" L. 230V operation.

1110
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1014
Rockwell 10 " Table Saw
41'' L. 110V operation.

1111
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.


1112
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.


1113
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1017
SCMI 21 " Band Saw
6 HP motor. 220V operation.








1021
(2) Couple-Mates
New appearing condition. Original boxes.

1118


1023


1024
Delta Wet Grinder
Expected signs of use.

1120
Damaged Scaffolding Cross Braces
Assorted sizes are bent, damaged and separated.

1025
Crafted Workbench
97 1/2'' L x 42 1/2'' W. Expected use and wear.

1121
(3) Cable Blocks
Some showing weld repair.

1026
21 " Pedestal Floor Fan
Normal signs of use.




1028
(4) Walnut Boards
8'' W x 1" D x 48" L (avg.). Rough cut ends.


1029
Minimax L55 Belt Sander
120" L. 230V operation.


1030
(2) 40 " Quick Clamps
Expected signs of use.








1034
(7) Assorted Bar Clamps
Ranging 36'' - 55'' L.


1035
Partially Finished Walnut Boards
Avg. 7" W. Largest, 120" L.








1039
(9) Walnut Boards
Ranging 5 1/2'' - 6 1/2'' W x 1" D. Largest, 102'' L.




1041
(6) Walnut Boards
1'' x 6'' x 96'' L.

1137
(1) Section of 4-1/2 Ft. Scaffolding
Includes 2 bucks and four 7' cross braces.

1042
(Approx. 24) Rough Cut Walnut Boards
Avg. 1-1/4'' D x 4-8" W. Avg. 60" L.

1138
(1) Section of 4-1/2 Ft. Scaffolding
Includes 2 bucks and four 7' cross braces.

1043
Hitachi 16 " Miter Saw
Includes assorted blades.

1139
(1) Section of 4-1/2 Ft. Scaffolding
Includes 2 bucks and four 7' cross braces.

1044
Wall Mounted Hardware Organizer with Hardware
17 1/2'' W x 19'' H. Buyer needs to remove from wall.

1140
(1) Section of 4-1/2 Ft. Scaffolding
Includes 2 bucks and four 7' cross braces.


1141
(1) Section of 4-1/2 Ft. Scaffolding
Includes 2 bucks and four 7' cross braces.




1143
(28) Wood Scaffold Planks
Avg. 8' L. Normal signs of use.




1145
Pine Plank
84" L x 10 3/4'' W x 1 1/4'' D.


1146
(11) Pine Plank Cut-Offs
29'' L x 10 1/2'' W x 1 1/4'' D.



1052
Millers Falls 18C Fore Plane
Good condition. Original box.


1053
Electronic Heat Gun
New appearing condition. Original box.


1054
Imported 1/4" and 3/8" Drive Socket Set
Appears complete in metal case.

1150
1-1/4" Coupling Pins
3/4 full bucket.






1153




1155

1060
Bridgewood Planer Set-Up Gauge
Includes wooden case. Good appearing condition.

1156
1-1/4" Coupling Pins
1/2 full bucket.

1061
Biesemeyer T-Square
Good appearing condition.

1157
1-1/4" Coupling Pins
Partially full plastic bin.


1158
Scaffolding Lock Pins
1/2 full bucket.

1063
(2) Grizzly Carbide Shaper Blades
2 1/4'' D. Model G1717.

1159
(8) Interior Doors
Ranging 29" - 30'' W. Good used condition.

1064
Porter Cable Profile Sander
Includes fitted case with pads, profile plates and profile mounting plates.



1161
Fabricated Steel Ladder
79'' L x 18 1/2'' W.

1066

1162
(2) Pine Loading Ramps
94'' L x 11'' W.


1163
Laminate Boards
Avg 40'' L x 13'' W. Particle board construction.

1068
Chalk Lines with Chalk and Chip Brushes
Brushes and some chalk lines are new in original packaging.


1069
14 " Carbide Tip Blade
New appearing condition.

1165
(2) 4-1/2 Ft. Scaffolding Sections
Includes 2 bucks and 4 cross braces.

1070
16 " Carbide Tip Blade
New appearing condition.

1165
(2) 4-1/2 Ft. Scaffolding Sections
Includes 2 bucks and 4 cross braces.

1071
Iridium File Set
Good appearing condition.

1165
(2) 4-1/2 Ft. Scaffolding Sections
Includes 2 bucks and 4 cross braces.

1072
Assorted Freud 9-1/2 " Dado Knives
New appearing condition.

1165
(2) 4-1/2 Ft. Scaffolding Sections
Includes 2 bucks and 4 cross braces.


1165
(2) 4-1/2 Ft. Scaffolding Sections
Includes 2 bucks and 4 cross braces.



Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Murry Communities Construction - Tool & Hardware - Lanc., PA
 Online Only Auction
Auction Date(s)
Bidding Starts: Wednesday May 1
Bidding Ends: Tuesday May 21
Auction Location

Lancaster, PA 17601
Company
Hess Auction Group

Contact: John M. Hess
Phone: (717) 664-5238
Website: www.hessauctiongroup.com

Listing Terms and Conditions
John M. Hess Auction Service, Inc. - 717-664-5238 Address: 750 Enterprise Way Lancaster, PA 17601 Pickup Date: Wednesday, May 22nd from 9am - 3pm. **All items MUST be picked up on the stated pickup date. No exceptions can be made. Hess Auction Group will not be able to hold items past the stated pick up date(s). Buyers will be charged full amount and will forfeit the items if they are not picked up on the stated pick up dates. There will not be assistance for loading or moving items. Please come prepared. Any Prospective Bidder (hereinafter referred to as Bidder and sometimes Buyer) who bids on any item, hereby agrees to these Conditions of Sale of John M. Hess Auction Service, Inc. (also d/b/a Conestoga Auction Company, Hess Auction Group) (hereinafter referred to as the Auction Company) relative to property being offered for sale at auction. These Conditions of Sale and all other contents of the catalog are subject to amendment by the Auction Company by the posting of notices or by oral announcements made. Auction Company has made every effort to catalog and correctly describe the property to be sold, however, all lots are sold 'AS IS' and should be examined prior to bidding. Flaws and imperfections caused in the making are not noted. Expect normal wear and oxidation on antique metal wares and crazing and normal glaze loss on pottery and ceramics. Any additional condition questions should be made 24 hours prior to the start of the auction to allow for our staff to review the items. In all matters, the records of the Auction will be final. By participating in any sale, the Bidder agrees to be bound by the following terms and conditions: A. This Auction has a 15% Buyers Premium B. BIDDING INCREMENTS: The auctioneers will be using set bid increments. If you have placed absentee bids that do not follow the set increments, your bid will be executed at the set lower increment. C. ON-LINE BIDDING: Auction Company will not be responsible for any omissions, errors or slow communications. D. PAYMENT: Payment must be made prior to removal from the auction house. Failure to do so may result in forfeiture of items. E. Credit Cards will be processed within 1 hour of the auction or 8:am the following business day F. SHIPPING: No shipping G. AS IS: Bidder agrees that before the Sale, Bidder or Bidder's agents should inspect the property before bidding to determine its condition, size and whether or not it has been repaired or restored. Bidder is responsible for satisfying himself or herself concerning the condition of the property and the matters referred to in the Catalog. Condition reports, photos and video or digital images are provided as a courtesy and should not be used as a substitute for viewing the items in person. All statements made in the catalog or in the condition report or made orally or in writing elsewhere are statements of opinion and are not to be relied on as statements of fact. Auction Company and the underlying owner of the property being sold ('Owner') assume no risk, liability or responsibility for the authenticity of the authorship of any property identified in this catalog. All property is sold "as is" and neither Auction Company nor the Owner make any warranties or representations of any kind or nature with respect to the property being sold, and no statement in the catalog or made at the sale, or in the bill of sale or invoice or elsewhere shall be deemed an assumption of liability or warranty or representation as to the description, genuineness, attribution, provenance or condition of the property. Auction Company and the Owner make no representations as to whether Bidder acquires any reproduction rights in the property being sold at the Sale. H. Withdrawal. Auction Company reserves the right to withdraw any property before sale and shall have no liability for such withdrawal. I. Bid Per Lot. Unless otherwise announced by the auctioneer, all bids are per lot as numbered in the Catalog. J. Video or digital images. At some auctions a video or digital screen may be used. Auction Company is not liable for any errors in the operation or quality of the image presented. K. Reserves. Unless the sale is advertised and announced as a sale without reserves, each lot may be offered subject to reserve. Auction Company may implement such reserves by bidding through its representatives on behalf of the Owner. L. Bidding. Auction Company reserves the right to reject a bid from any bidder. The auctioneer has the right to split any bidding increment and to advance the bidding in any manner as the auctioneer may decide. The highest bidder acknowledged by the auctioneer shall be the buyer. In the event of any dispute between bidders, the auctioneer shall have sole and final discretion either to determine the successful bidder or to re-offer and resell the article in dispute. If any dispute arises after the sale, the sale record of Auction Company shall be conclusive in all respects. M. Auctioneer's Discretion. If the auctioneer determines that any opening bid is not commensurate with the value of the article offered, he may reject the same and withdraw the article from the sale. If having accepted an opening bid, the auctioneer decides that any advance thereafter is not of sufficient amount, he may reject the advance. N. Successful Bid. On the fall of the auctioneer's hammer, title to the offered lot will pass from Owner to the highest bidder acknowledged by the auctioneer, subject to these Conditions of Sale set forth herein, and such bidder (a) assumes full risk and responsibility therefore (b) if requested will sign a confirmation of purchase and (c) will pay the purchase price in full or such part as Auction Company may require for all lots purchased. O. Collateral/Security. The Buyer grants Auction Company a security interest in the purchase property and Auction Company may retain as collateral security for the Bidder's obligations to Auction Company any property or monies held or received by Auction Company for the account of the Bidder. Payment will not be deemed to have been made in full until Auction Company has collected funds represented by checks, or, in the case of bank or cashier?s checks, until Auction Company has confirmed their authenticity. Bidder agrees that a 1-1/2% per month late charge will be imposed on the total purchase price if payment is not made in accordance with all of the conditions set forth herein and agrees to pay any returned check charges that may be incurred. P. Non-Payment. If the Bidder does not make full payment for the purchases within the time required, Auction Company is authorized in its absolute and sole discretion to exercise one or more of the following remedies, in addition to other remedies available to Auction Company and the Owner: Auction Company is authorized to: (a) hold the buyer liable for the total purchase price; (b) cancel the sale, retaining as liquidated damages all payments made by the Buyer; (c) resell the property at public auction or private sale with terms that Auction Company deems appropriate; (d) to resell the property at public auction without reserve and the Buyer shall be liable for any deficiency, cost, handling charges and the expenses of both sales and the commissions on both sales; (e) to offset the full purchase price against any amount owed by Auction Company to the Buyer; (f) to not allow any bids at any upcoming auctions by or on behalf of the Buyer; and (h) to take other actions as Auction Company find necessary and appropriate. The Buyer grants Auction Company a security interest in any property in Auction Company?s possession which is owned by such Buyer and Auction Company is authorized to hold such property as collateral security for such Buyer?s obligations. Buyer shall be liable to Auction Company for all other charges incurred because of Buyer's non-payment, including attorney fees, expenses and incidental damages. As between Auction Company and Owner, if the successful bidder does not pay for the property, collection procedures shall be the responsibility of the Consignor and not Auction Company. Q. Limitation of Liability. If, for any reason a purchased lot cannot delivered in the same condition as at the time of sale, or should any purchased lot be stolen, miss-delivered or lost prior to delivery, Auction Company shall not be liable for any amount more than that paid by the buyer. R. Governing Law and Jurisdiction. The Conditions of Sale, as well as the Buyer's, Owner's and Auction Company's respective rights and obligations shall be governed, construed and enforced in accordance with the laws of the State of Pennsylvania. All persons participating in any auction sale, whether as bidder or consignor, whether present in person or by agent, or by absentee bid, order bid, telephone, internet or other means, consent to the exclusive jurisdiction of the state courts located in Lancaster County, Pennsylvania. S. Severability. If any part of the Conditions of Sale is found by any court to be invalid, illegal or unenforceable, that part shall be discounted and the rest of the conditions shall continue to be valid to the fullest extent of the law. NOTE: Condition reports, photos and video or digital images are provided as a courtesy and should not be used as a substitute for viewing the items in person. All items are sold "as is" in accordance with the Conditions of Sale. YOUR BIDDING ACKNOWLEDGES YOUR ACCEPTANCE OF THESE CONDITIONS OF SALE.
Shop Equipment/Tools: Bridgewood BW-16 Table Saw, Bridgewood Dust Collector, Craftsman Radial Arm Saw, Bridgewood Shaper, Bridgewood Jointer, Rockwell Drill Press, Minimax L55 Belt Sander, Hitachi Miter Saw, scaffolding and many more items too numerous to mention! Hardware/Windows: Large selection of hardware, door latches, blind hinges, deadbolt latches, door knob parts, flush mount ceiling lights, screen doors, vinyl replace windows and more!

1000
BUYER'S NOTE:
Woodworking equipment is in very good working order with most pieces having minimal use. Power to equipment will be disconnected by seller prior to pick-up.

1001
16 " Bridgewood BW-16 Table Saw
9" L, including 2 extensions. 220V, 3 phase electric. 7-1/2 HP motor. Manuf. March 1988.

1098
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1002
Bridgewood Dust Collector
110V operation. Missing duct work or hose.

1099
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1003
Bridgewood 2 HP Dust Collector
110V operation. Good appearing condition. Missing hoses.

1100
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1004
Craftsman 10 " Radial Arm Saw
Expected signs of use.

1101
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1005
(4) Saw Horses
Ranging 30'' - 46'' L. Normal signs of use.

1102
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1006
Bridgewood Shaper
39'' L. 1" spindle. 230V operation. Includes metal tool box with accessories.

1103
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1007
Bridgewood 6" Jointer
45'' L. 110V operation.

1104
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1008

1105
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1009
Walnut Partially Finished Lumber
Assorted lengths and widths.

1106
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1010
(3) Poplar Posts
Avg. 5 1/2'' x 7 1/2'' with largest 48" H.

1107
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1011
Rockwell Drill Press
69'' H. 110V operation.

1108
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1012
Bridgewood 20 " Planer
230V operation. BUYER'S NOTE: VERY HEAVY. Bring appropriate labor, transport and tools. Forklift available. Planer located in room by loading dock.

1109
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1013
Bridgewood 12" Jointer
81" L. 230V operation.

1110
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1014
Rockwell 10 " Table Saw
41'' L. 110V operation.

1111
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1015

1112
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1016

1113
(1) Section of 6-1/2 Ft. Scaffolding
Each set includes 2 bucks and four 7' cross braces.

1017
SCMI 21 " Band Saw
6 HP motor. 220V operation.

1114

1018

1115

1019

1116

1020

1117

1021
(2) Couple-Mates
New appearing condition. Original boxes.

1118

1022

1023

1119

1024
Delta Wet Grinder
Expected signs of use.

1120
Damaged Scaffolding Cross Braces
Assorted sizes are bent, damaged and separated.

1025
Crafted Workbench
97 1/2'' L x 42 1/2'' W. Expected use and wear.

1121
(3) Cable Blocks
Some showing weld repair.

1026
21 " Pedestal Floor Fan
Normal signs of use.

1122

1027

1123

1028
(4) Walnut Boards
8'' W x 1" D x 48" L (avg.). Rough cut ends.

1124

1029
Minimax L55 Belt Sander
120" L. 230V operation.

1125

1030
(2) 40 " Quick Clamps
Expected signs of use.

1126

1031

1127

1032

1128

1033

1129

1034
(7) Assorted Bar Clamps
Ranging 36'' - 55'' L.

1130

1035
Partially Finished Walnut Boards
Avg. 7" W. Largest, 120" L.

1131

1036

1132

1037

1133

1038

1134

1039
(9) Walnut Boards
Ranging 5 1/2'' - 6 1/2'' W x 1" D. Largest, 102'' L.

1135

1040

1136

1041
(6) Walnut Boards
1'' x 6'' x 96'' L.

1137
(1) Section of 4-1/2 Ft. Scaffolding
Includes 2 bucks and four 7' cross braces.

1042
(Approx. 24) Rough Cut Walnut Boards
Avg. 1-1/4'' D x 4-8" W. Avg. 60" L.

1138
(1) Section of 4-1/2 Ft. Scaffolding
Includes 2 bucks and four 7' cross braces.

1043
Hitachi 16 " Miter Saw
Includes assorted blades.

1139
(1) Section of 4-1/2 Ft. Scaffolding
Includes 2 bucks and four 7' cross braces.

1044
Wall Mounted Hardware Organizer with Hardware
17 1/2'' W x 19'' H. Buyer needs to remove from wall.

1140
(1) Section of 4-1/2 Ft. Scaffolding
Includes 2 bucks and four 7' cross braces.

1045

1141
(1) Section of 4-1/2 Ft. Scaffolding
Includes 2 bucks and four 7' cross braces.

1046

1142

1047

1143
(28) Wood Scaffold Planks
Avg. 8' L. Normal signs of use.

1048

1144

1049

1145
Pine Plank
84" L x 10 3/4'' W x 1 1/4'' D.

1050

1146
(11) Pine Plank Cut-Offs
29'' L x 10 1/2'' W x 1 1/4'' D.

1051

1147

1052
Millers Falls 18C Fore Plane
Good condition. Original box.

1148

1053
Electronic Heat Gun
New appearing condition. Original box.

1149

1054
Imported 1/4" and 3/8" Drive Socket Set
Appears complete in metal case.

1150
1-1/4" Coupling Pins
3/4 full bucket.

1055

1151

1056

1152

1057

1153

1058

1154

1059

1155

1060
Bridgewood Planer Set-Up Gauge
Includes wooden case. Good appearing condition.

1156
1-1/4" Coupling Pins
1/2 full bucket.

1061
Biesemeyer T-Square
Good appearing condition.

1157
1-1/4" Coupling Pins
Partially full plastic bin.

1062

1158
Scaffolding Lock Pins
1/2 full bucket.

1063
(2) Grizzly Carbide Shaper Blades
2 1/4'' D. Model G1717.

1159
(8) Interior Doors
Ranging 29" - 30'' W. Good used condition.

1064
Porter Cable Profile Sander
Includes fitted case with pads, profile plates and profile mounting plates.

1160

1065

1161
Fabricated Steel Ladder
79'' L x 18 1/2'' W.

1066

1162
(2) Pine Loading Ramps
94'' L x 11'' W.

1067

1163
Laminate Boards
Avg 40'' L x 13'' W. Particle board construction.

1068
Chalk Lines with Chalk and Chip Brushes
Brushes and some chalk lines are new in original packaging.

1164

1069
14 " Carbide Tip Blade
New appearing condition.

1165
(2) 4-1/2 Ft. Scaffolding Sections
Includes 2 bucks and 4 cross braces.

1070
16 " Carbide Tip Blade
New appearing condition.

1165
(2) 4-1/2 Ft. Scaffolding Sections
Includes 2 bucks and 4 cross braces.

1071
Iridium File Set
Good appearing condition.

1165
(2) 4-1/2 Ft. Scaffolding Sections
Includes 2 bucks and 4 cross braces.

1072
Assorted Freud 9-1/2 " Dado Knives
New appearing condition.

1165
(2) 4-1/2 Ft. Scaffolding Sections
Includes 2 bucks and 4 cross braces.

1073

1165
(2) 4-1/2 Ft. Scaffolding Sections
Includes 2 bucks and 4 cross braces.

1074

1166