May 9th Woodworking Machinist & Mechanic Tool Auction
Listing ID#: 1617719

Auction Location

New Bloomfield, PA 17068
Auction Dates and TimesSALE IS COMPLETED
Bidding Starts: Monday Apr 29
Bidding Ends: Thursday May 9
Auction Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
Fahnestock's Auction Service

Contact: Nevin Fahnestock
Phone: (717) 853-4025
Email: nhfahnestock@gmail.com

GoToAuction.com ID#: 6256
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Auction Terms & Conditions: 1. By bidding in this auction you are agreeing to all of the terms posted below for this auction so please read the full list of terms. 2. This is an internet only auction. All bidding is online. The bidding for this auction will begin to close on Thursday, May 9th at 7:00pm. Lots will close approximately every 20 seconds. This auction uses a soft close, which provides an authentic auction atmosphere. Items will remain open for one minute after the latest bid. At 6:30pm a new, flashing button will appear allowing you to watch the auction close with a live countdown. This allows you to bid on the next 12 items scheduled to close without refreshing the page. 3. A preview will be held on Thursday, May 9th 2pm-6:00pm at Fahnestock's Auction House at 328 Brady Rd. New Bloomfield, PA 17068. 4. Pickup of your winning purchases will be on Friday, May 10th 12:00pm - 6:00pm at Fahnestock's auction house at 328 Brady Rd. New Bloomfield, PA 17068. An email will be sent to each winning bidder including an invoice. IMPORTANT: If you do not receive an invoice, check your SPAM folder. some of the invoices end up there depending on your mail settings. You should set your mail to "always accept" mail from admin@fahnestockauction.com. 5. All items are offered and sold "AS IS, WHERE IS" with all faults. We encourage you to come to the preview to see and inspect the items. 6. All descriptions are believed accurate but not warranted. Measurements are approximate. 7. NOTICE: Fahnestock Auction may not hold any items for pick up beyond the stated times. Everything should be picked up by 6:00pm on Friday, May 11th unless your items are to be shipped. Buyer will be charged the full amount for items not picked up, and may forfeit their right and claim to the property. 8. Your bid is a contract and you must pay for any items you win. By placing a bid, bidder signifies that they have examined the items to their satisfaction, or that they have chosen not to personally examine them. 9. Fahnestock Auction reserves the right to reject any bid and/or bidder at our sole discretion. 10. Applicable taxes include PA sales tax of 6%. If you have a sales tax exemption for resale or another reason, Fahnestock Auction needs a signed Pennsylvania Exemption Certificate (form REV-1220) on file in order to remove sales tax. Please email List.service.email@gmail.com with your copy. If you are having your items shipped out of state, we do not have to collect sales tax. You are responsible for reporting and paying any sales or use tax charged by your state on any items shipped. 11. This auction has a 13% buyer's premium and 6% PA sales tax. This means that a final bid of $100 plus the buyer's premium constitutes the total purchase price of $113 with sales tax of $6.90 for a total due of $119.78 12. You will receive an invoice listing the items won within a few hours of the auction closing. If you do not receive an email with your invoice, please check your spam folder. Your credit card will automatically be charged. Due to the remote auction pick up site, payment processing at pick-up for this auction will not be available. PLEASE bring a "PAID" invoice copy to pick-up. If your card is declined, you will receive an unpaid invoice with instructions on how to make payment. Our office may contact you to make payment before the pickup. Cards accepted include MasterCard, Visa, American Express and Discover only. 13. Shipping is available for most smaller items in this auction. If you are interested in an item and are not sure if it could be practically shipped, please contact us to help determine that. If you need shipping, after the auction, Fahnestock's will transport your items to "The mail room etc." in Lemoyne PA. at no charge. They will be given a copy of your invoice with your contact information and they will contact you to make shipping arrangements. They can be contacted at 717-975-9991. We have been using them for a long time as our shipping partner, and have received only positive feedback. 14. There will be a $40 returned check fee for any declined check received. 15. Declined credit cards can result in a buyer being banned from participating in future auctions. Fahnestock Auction is a member of the National and State Auctioneers Associations. Non-paying and/or fraudulent bidder names WILL be shared with other auction companies. 16. Buyer will be charged the full amount for items not picked up, and may forfeit their right and claim to the property. Unclaimed lots may incur up to a $25 removal fee based on the size of the items. 17. This is a public auction and not a retail setting. All sales are final. No returns or chargebacks are accepted. 18. Some items may be sold per piece. The bid price is multiplied by the amount of items in the lot. This is shown using the bid price x quantity. (Example "$12.50 x 4" equals a total bid of $50.00).
Listing Information
This 300+ lot tool auction features items from a local private workshop that. Higlights include 60 gal upright 220v air compressor, DeWalt double bevel sliding mitre saw on stand, mechanics tools, power & hand carpenter tools, machinist lathe, DeWalt scroll saw, DeWalt thickness board planer, Milwaukee HD portable band saw. There is also 100�s of small tools & hardware lots.






6
Husky Pro 60 Gallon Upright Air Compressor
7hp, 135 max psi, 220V, 67" off the skid

5
MORE LOTS TO COME!
CATALOGING IS ON GOING!

7
DeWalt Double Bevel Sliding Compound Miter Saw
mode DW719 with DW723 stand and Laser guide, 12" cut

8
7 pine lumber 1 x 12's +
there are seven 1x12s Four of them are 6 ft long. two of them are 6'-8". One 1x12 8 ft long, and a 1x10 8 ft long. quality pieces of lumber.


19
Three Hardware Kits
1 empty, 1 filled with various finishing nails, and one with woodworking items.

20
Central pneumatic air & hose reel
25-Ft hose on reel new in box.


22
Drill bit lot
Small bits are Aggressor Blu-Mol brand




26
Snap-on pneumatic gauge set
not sure what it was used with, but it's very oily. One lens on one gauge has a deep scratch or crack.


28
AMT 3 caliper set 11" - 12" long
inside outside and straight calipers.

29
Russell Jennings auger bits & drill brace
drill brace is it Dunlop. The truck seems to operate okay. drill bits in wooden case are Russell Jennings.

30
Coleman Propane fuel stove attachment.
Plastic feet, clean burner, bottle empty.

31
4 ZAG hardware kits - some contents
looks like mostly electrical connectors.

32
Stack on hardware kits
4 kits. Two empty, two with partial contents (screws, hooks, pins).

33
Heavy extension cord
Orange extension cord.

34
Router bit lot
Rabbeting bit with bearing set, straight bit, round over.


36
Antique Lufkin wood lumber rule ruler
used to measure the board footage in a piece of lumber.


38
Blue point or snap-on screw extractor set
Set of 25. Though not marked, I believe them to be blue point or snap-on. Most luck unused some of the smaller ones show some wear.


40
Router bit lot.
See pictures.

41
Dewalt Corded Planer
DW680 planer, rabbetig fence, guage plate, carrying case. Clean!!

42


44

45
Drill Doctor bit sharpener.
New inbox comes with 2 diamond sharpening wheels.

46
Blue Point Computers tool YA2100
maybe one piece missing as there is an empty space.

47
Mechanics tool lot snap ring pliers & more
K-D, Waldss, Blue Point, Snap-on & others

48
3 drill bit index sets - Brad Point masonry & reg
Firestorm masonry bit parcel set with the three smallest nut present. Brad Poinsett that looks fairly complete, partial set of regular drill bits.


50
7 - 24" electrician's drill bits.
run from about 1/8" to 5/8"

51
Pennzoil Motor Oil
5w-30, 5w-20 and sae 30 weights

52
Kreg Shaper Table with Craftsman Professional
Router; router model. 28190, 12.5A, 12-25K rpm

53
Metal tray of rivets and rivet tool
Various sizes of rivets and fasteners.

54
Brass valve and gauge lot
Various brass valves, gauges, and fasteners.

55
Hardware kit with air fittings
Various air fittings, lots of brass.

56
Sentinel commercial door closer
model SN 504 PA. appears unused.

57
Klein nut driver set +
Set of five nut drivers + crank neck electrician screwdriver.

58
41+ var mechanics wrench tool lot
Variety of makers, metric and SAE. The Pittsburgh set is missing 2.

59
20 MAC - Blue Point + 1 Snap On wrench lot
miscellaneous tight wrenches.

60
Misc. tool lot - see pics
Pop riveter and Pop rivets, hammers, carving chisels, Carpenters squares and much more. Review pictures to see everything.




65
DeWalt 10" Compact Table Saw
comes with wooden stand.

66
MAC - Blue Point & other auto mechanic tools
Mac multi-cutter dg1000, Blue point wire tool, AO Duo Check coolant and battery tester, and two other Mac tools.

67
40+ Deltronic machinist inspection pin gauges
a miscellaneous lot of Deltronic pin gauges.

68
Misc clamp and vise lot
bench vise has a 2 -1/4" jaw

69
Blue Point - Matco + mechanics tools
silverline mighty back, Matco tools tight fit angle drill kit, and a blue point screw extractor set. not sure if all parts are there.



72
Bench Vise
11" in length, locking base.

73
Clamp on Bench Vise
Locking swivel base.

74
Spray paint lot
16 cans, new and partially used.

75
Two extension cords, one 16 ga 100' and the black
looks to be 50' and heavier gauge.

76
Dewalt angle grinder corded
Grinder, blade gard, handle, case and various discs.

77
7 forstner type drill bits
1/2" - 2". Taiwan. a couple still have their coating on them and are probably not used.

78
Machinist dial caliber & micrometer lock
Craftsman 0 to 1-in micrometer English and metric, centech dial caliper, and the second electronic digital caliper without a name.

79
3 LG Yankee spiral ratchet screwdrivers.
these are about 27 in Long fully extended.

80
Craftsman & Dremel rotary tools & stand
Dremel Moto tool drill press model 210 with rotary tool. hand a Craftsman single speed rotary tool.


82
Metal Rolling Shop Cart
two tier, Approx 24 x 36? and 32? tall.

83

84

85
Craftsman 12" drive deep socket set
SAE, 22 sockets, magnetic carrying case.



88
Craftsman Excalibur adjustable dado blade
couple of storage marks but not sure it was ever used.


90
Craftsman 1/4" 19 PC socket set
appears to all be there.

91
100's of drill bits
very large lot of drill bits and a couple taps. assorted sizes many divided up into baggies by size.

92
Large Hardware Tote / Carrying Case
Various screws, electrical nuts, conduit connectors, etc

93
Channel Lock Pliers Lot
Adjustable, large adjustable, and cutters.

94
Six Hardware Caddy Totes
hardware show is included. Nuts & bolts, cotter pins etc

95
Snap On 1/4" Drive Ratchet
7 12" long. F 830.

96
Snap On 1/2" Extensions
2", 5" x 2, 9 1/2" extensions.


98
BeadLOCK CANON SYSTEM KIT 3/8" & 1/2"
appears to be unused in the original package.

99
Ridgid pipe threading tools
assortment of sizes and two different ratcheting reversible threading heads. 3/4-In threaded pipe handle is not present.

100
8 asst large USA made wrenches
sizes range from 1-1/16" to 1-1/2". these are larger. very heavy duty wrenches ranging up to 17" in length

101
like new Craftsman 1/2" drill in case
very. appears virtually unused.

102
Large lot of tools - see pictures
Clamps, flaring tool, squares and much much more.

103
Snap on socket set SAE
11 socket set. 1/4" to 7/8".


105
Hardware Kit Various Taps
Many different sizes.


107

108
Raybestos Safe T Gage brake measure tool
New in the box. vintage gage for brakes.

109
MG welding electrode rods - full pack
austentic manganese steel electrode pack. Sealed 10 lbs.


111
45 PC Greenfield tap & die lot
most are Greenfield a couple others may not be. these are old enough that the taps are set in wood sleeves in the box. appear to be New Old stock.

112
32 misc Craftsman, Billings and other wrenches
largest is a 1-1/8", smallest 1/4". a variety of makers including Craftsman and Billings.



115
Wheel Chocks
9 1/2" x 7 1/2", 6" tall.


117
DustRight Vortex Wood Saw Dust Collection System
for use with shop vac. Many extra hoses.

118
13 small specialized pliers and cutters
two are Mark Lindstrom, Sweden. some not marked. All are about 4 to 5 in in length.

119
4 levels & center finding rule
levels range from 10" to 28". Ruler- Tech 24" center finding rule. One is a combination square and light.

120
20 Bonney mechanics wrenches
most of these are the really thin type. quality made.

121
4 pickup truck rail tie down inserts.
looks like these go in the rectangular holes in a pickup truck bed to create tie downs.

122
4 drill bit sets / indexes
Five-Piece drill Master masonry bit set that has 14-in long drill bits . A seven-piece Brad Point wood bit set that has 12-in bits. And there are two indexes one has Brad Point bits and the other regular bits where a few of the smaller ones are mis...




126
Walnut, Oak and Poplar Lumber
All boards are 3/4" thick, walnut boards are 10+" wide and 76 and 92" long, poplars is 7+ " Wide and 72" long and oak board is 2-1/" wide and 72" long.

127
Lot Craftsman Sockets
SAE deepwell and shallow as well as hex key. Includes Snap-On magnetic holder

128
12 PR pliers cutters channelocks +
Names on tools like Craftsman, wizard, Bernard's. some without names.

132
International Harvester 3/4" Drive 1 1/8" Socket
This is a rare socket from a very collectible brand. 999419R1 - 12 point

133
Craftsman combination wrench lot
SAE, 1 1/4" down to tiny.


135
Snap-On 3/8" Ratchet accessories
1 & 6" extensions, spark plug socket & 1/2" adapter & spinner



138
Snap On Tools Corporation Advertising Pouch
Measures 7" x 4". 1218 Harmon Place Minneapolis, Minnesota. I believe this to be from the 1950's. Do you have one in your collection???

139
Snap On Ratchet Driver
RE36797. Has 2 driver bits in the handle. Used.

140
Snap On Yellow Handle Screwdriver Group
3 stubbies and 2 philips head. SDDI x 2, SDDP22, SDDP42, and SDDP31. Used.

141
Snap On Tire Valve Core Tools, Screwdriver
One philips head screwdriver SDDP42 No. 2, and two tire valve core tools TR107A. Black handles, used.

142
Craftsman 3/4" Drive Large Sockets
1 5/8", 1 11/16", 1 3/4", 1 13/16", and 1 7/8". Monster 12 point sockets!


144
Adjustable Roller Stand
16" wide, 16-24" height

145
Reliant DD79 Belt and Disc Sander
6 X 24" belt and 9" disc.



148
Coleman Red Lantern Model 200A
Used condition. These red Coleman lanterns are hot right now!

149
Snap On / Vacuum Grip Pliers Newport PA
The Snap On Vacuum Grip are #387. The Forged Steel Products are #66.


151
5 SAE Snap On 1/2" Drive Sockets
5/8, 11/16, 3/4, 13/16, 7/8. 6 pt. Used.

152
9 Snap On SAE 1/2" Drive Sockets
1/4 thru 7/8. 6 point. Used.


Auction License: AU-2553-L
Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Other Sales by
This Company

May 16
Enola, PA


May 20
New Bloomfield, PA



Sponsored Links

May 9th Woodworking Machinist & Mechanic Tool Auction

Fahnestock's Auction Service

Fahnestock's Auction Service


Contact: Nevin Fahnestock
Phone: (717) 853-4025
Sale Location
328 Brady Rd.
New Bloomfield, PA 17068
Sale Dates and Times
Sale Terms and Conditions
Auction Terms & Conditions: 1. By bidding in this auction you are agreeing to all of the terms posted below for this auction so please read the full list of terms. 2. This is an internet only auction. All bidding is online. The bidding for this auction will begin to close on Thursday, May 9th at 7:00pm. Lots will close approximately every 20 seconds. This auction uses a soft close, which provides an authentic auction atmosphere. Items will remain open for one minute after the latest bid. At 6:30pm a new, flashing button will appear allowing you to watch the auction close with a live countdown. This allows you to bid on the next 12 items scheduled to close without refreshing the page. 3. A preview will be held on Thursday, May 9th 2pm-6:00pm at Fahnestock's Auction House at 328 Brady Rd. New Bloomfield, PA 17068. 4. Pickup of your winning purchases will be on Friday, May 10th 12:00pm - 6:00pm at Fahnestock's auction house at 328 Brady Rd. New Bloomfield, PA 17068. An email will be sent to each winning bidder including an invoice. IMPORTANT: If you do not receive an invoice, check your SPAM folder. some of the invoices end up there depending on your mail settings. You should set your mail to "always accept" mail from admin@fahnestockauction.com. 5. All items are offered and sold "AS IS, WHERE IS" with all faults. We encourage you to come to the preview to see and inspect the items. 6. All descriptions are believed accurate but not warranted. Measurements are approximate. 7. NOTICE: Fahnestock Auction may not hold any items for pick up beyond the stated times. Everything should be picked up by 6:00pm on Friday, May 11th unless your items are to be shipped. Buyer will be charged the full amount for items not picked up, and may forfeit their right and claim to the property. 8. Your bid is a contract and you must pay for any items you win. By placing a bid, bidder signifies that they have examined the items to their satisfaction, or that they have chosen not to personally examine them. 9. Fahnestock Auction reserves the right to reject any bid and/or bidder at our sole discretion. 10. Applicable taxes include PA sales tax of 6%. If you have a sales tax exemption for resale or another reason, Fahnestock Auction needs a signed Pennsylvania Exemption Certificate (form REV-1220) on file in order to remove sales tax. Please email List.service.email@gmail.com with your copy. If you are having your items shipped out of state, we do not have to collect sales tax. You are responsible for reporting and paying any sales or use tax charged by your state on any items shipped. 11. This auction has a 13% buyer's premium and 6% PA sales tax. This means that a final bid of $100 plus the buyer's premium constitutes the total purchase price of $113 with sales tax of $6.90 for a total due of $119.78 12. You will receive an invoice listing the items won within a few hours of the auction closing. If you do not receive an email with your invoice, please check your spam folder. Your credit card will automatically be charged. Due to the remote auction pick up site, payment processing at pick-up for this auction will not be available. PLEASE bring a "PAID" invoice copy to pick-up. If your card is declined, you will receive an unpaid invoice with instructions on how to make payment. Our office may contact you to make payment before the pickup. Cards accepted include MasterCard, Visa, American Express and Discover only. 13. Shipping is available for most smaller items in this auction. If you are interested in an item and are not sure if it could be practically shipped, please contact us to help determine that. If you need shipping, after the auction, Fahnestock's will transport your items to "The mail room etc." in Lemoyne PA. at no charge. They will be given a copy of your invoice with your contact information and they will contact you to make shipping arrangements. They can be contacted at 717-975-9991. We have been using them for a long time as our shipping partner, and have received only positive feedback. 14. There will be a $40 returned check fee for any declined check received. 15. Declined credit cards can result in a buyer being banned from participating in future auctions. Fahnestock Auction is a member of the National and State Auctioneers Associations. Non-paying and/or fraudulent bidder names WILL be shared with other auction companies. 16. Buyer will be charged the full amount for items not picked up, and may forfeit their right and claim to the property. Unclaimed lots may incur up to a $25 removal fee based on the size of the items. 17. This is a public auction and not a retail setting. All sales are final. No returns or chargebacks are accepted. 18. Some items may be sold per piece. The bid price is multiplied by the amount of items in the lot. This is shown using the bid price x quantity. (Example "$12.50 x 4" equals a total bid of $50.00).
Listing Details
This 300+ lot tool auction features items from a local private workshop that. Higlights include 60 gal upright 220v air compressor, DeWalt double bevel sliding mitre saw on stand, mechanics tools, power & hand carpenter tools, machinist lathe, DeWalt scroll saw, DeWalt thickness board planer, Milwaukee HD portable band saw. There is also 100�s of small tools & hardware lots.






6
Husky Pro 60 Gallon Upright Air Compressor
7hp, 135 max psi, 220V, 67" off the skid

5
MORE LOTS TO COME!
CATALOGING IS ON GOING!

7
DeWalt Double Bevel Sliding Compound Miter Saw
mode DW719 with DW723 stand and Laser guide, 12" cut

8
7 pine lumber 1 x 12's +
there are seven 1x12s Four of them are 6 ft long. two of them are 6'-8". One 1x12 8 ft long, and a 1x10 8 ft long. quality pieces of lumber.


19
Three Hardware Kits
1 empty, 1 filled with various finishing nails, and one with woodworking items.

20
Central pneumatic air & hose reel
25-Ft hose on reel new in box.


22
Drill bit lot
Small bits are Aggressor Blu-Mol brand




26
Snap-on pneumatic gauge set
not sure what it was used with, but it's very oily. One lens on one gauge has a deep scratch or crack.


28
AMT 3 caliper set 11" - 12" long
inside outside and straight calipers.

29
Russell Jennings auger bits & drill brace
drill brace is it Dunlop. The truck seems to operate okay. drill bits in wooden case are Russell Jennings.

30
Coleman Propane fuel stove attachment.
Plastic feet, clean burner, bottle empty.

31
4 ZAG hardware kits - some contents
looks like mostly electrical connectors.

32
Stack on hardware kits
4 kits. Two empty, two with partial contents (screws, hooks, pins).

33
Heavy extension cord
Orange extension cord.

34
Router bit lot
Rabbeting bit with bearing set, straight bit, round over.


36
Antique Lufkin wood lumber rule ruler
used to measure the board footage in a piece of lumber.


38
Blue point or snap-on screw extractor set
Set of 25. Though not marked, I believe them to be blue point or snap-on. Most luck unused some of the smaller ones show some wear.


40
Router bit lot.
See pictures.

41
Dewalt Corded Planer
DW680 planer, rabbetig fence, guage plate, carrying case. Clean!!

42


44

45
Drill Doctor bit sharpener.
New inbox comes with 2 diamond sharpening wheels.

46
Blue Point Computers tool YA2100
maybe one piece missing as there is an empty space.

47
Mechanics tool lot snap ring pliers & more
K-D, Waldss, Blue Point, Snap-on & others

48
3 drill bit index sets - Brad Point masonry & reg
Firestorm masonry bit parcel set with the three smallest nut present. Brad Poinsett that looks fairly complete, partial set of regular drill bits.


50
7 - 24" electrician's drill bits.
run from about 1/8" to 5/8"

51
Pennzoil Motor Oil
5w-30, 5w-20 and sae 30 weights

52
Kreg Shaper Table with Craftsman Professional
Router; router model. 28190, 12.5A, 12-25K rpm

53
Metal tray of rivets and rivet tool
Various sizes of rivets and fasteners.

54
Brass valve and gauge lot
Various brass valves, gauges, and fasteners.

55
Hardware kit with air fittings
Various air fittings, lots of brass.

56
Sentinel commercial door closer
model SN 504 PA. appears unused.

57
Klein nut driver set +
Set of five nut drivers + crank neck electrician screwdriver.

58
41+ var mechanics wrench tool lot
Variety of makers, metric and SAE. The Pittsburgh set is missing 2.

59
20 MAC - Blue Point + 1 Snap On wrench lot
miscellaneous tight wrenches.

60
Misc. tool lot - see pics
Pop riveter and Pop rivets, hammers, carving chisels, Carpenters squares and much more. Review pictures to see everything.




65
DeWalt 10" Compact Table Saw
comes with wooden stand.

66
MAC - Blue Point & other auto mechanic tools
Mac multi-cutter dg1000, Blue point wire tool, AO Duo Check coolant and battery tester, and two other Mac tools.

67
40+ Deltronic machinist inspection pin gauges
a miscellaneous lot of Deltronic pin gauges.

68
Misc clamp and vise lot
bench vise has a 2 -1/4" jaw

69
Blue Point - Matco + mechanics tools
silverline mighty back, Matco tools tight fit angle drill kit, and a blue point screw extractor set. not sure if all parts are there.



72
Bench Vise
11" in length, locking base.

73
Clamp on Bench Vise
Locking swivel base.

74
Spray paint lot
16 cans, new and partially used.

75
Two extension cords, one 16 ga 100' and the black
looks to be 50' and heavier gauge.

76
Dewalt angle grinder corded
Grinder, blade gard, handle, case and various discs.

77
7 forstner type drill bits
1/2" - 2". Taiwan. a couple still have their coating on them and are probably not used.

78
Machinist dial caliber & micrometer lock
Craftsman 0 to 1-in micrometer English and metric, centech dial caliper, and the second electronic digital caliper without a name.

79
3 LG Yankee spiral ratchet screwdrivers.
these are about 27 in Long fully extended.

80
Craftsman & Dremel rotary tools & stand
Dremel Moto tool drill press model 210 with rotary tool. hand a Craftsman single speed rotary tool.


82
Metal Rolling Shop Cart
two tier, Approx 24 x 36? and 32? tall.

83

84

85
Craftsman 12" drive deep socket set
SAE, 22 sockets, magnetic carrying case.



88
Craftsman Excalibur adjustable dado blade
couple of storage marks but not sure it was ever used.


90
Craftsman 1/4" 19 PC socket set
appears to all be there.

91
100's of drill bits
very large lot of drill bits and a couple taps. assorted sizes many divided up into baggies by size.

92
Large Hardware Tote / Carrying Case
Various screws, electrical nuts, conduit connectors, etc

93
Channel Lock Pliers Lot
Adjustable, large adjustable, and cutters.

94
Six Hardware Caddy Totes
hardware show is included. Nuts & bolts, cotter pins etc

95
Snap On 1/4" Drive Ratchet
7 12" long. F 830.

96
Snap On 1/2" Extensions
2", 5" x 2, 9 1/2" extensions.


98
BeadLOCK CANON SYSTEM KIT 3/8" & 1/2"
appears to be unused in the original package.

99
Ridgid pipe threading tools
assortment of sizes and two different ratcheting reversible threading heads. 3/4-In threaded pipe handle is not present.

100
8 asst large USA made wrenches
sizes range from 1-1/16" to 1-1/2". these are larger. very heavy duty wrenches ranging up to 17" in length

101
like new Craftsman 1/2" drill in case
very. appears virtually unused.

102
Large lot of tools - see pictures
Clamps, flaring tool, squares and much much more.

103
Snap on socket set SAE
11 socket set. 1/4" to 7/8".


105
Hardware Kit Various Taps
Many different sizes.


107

108
Raybestos Safe T Gage brake measure tool
New in the box. vintage gage for brakes.

109
MG welding electrode rods - full pack
austentic manganese steel electrode pack. Sealed 10 lbs.


111
45 PC Greenfield tap & die lot
most are Greenfield a couple others may not be. these are old enough that the taps are set in wood sleeves in the box. appear to be New Old stock.

112
32 misc Craftsman, Billings and other wrenches
largest is a 1-1/8", smallest 1/4". a variety of makers including Craftsman and Billings.



115
Wheel Chocks
9 1/2" x 7 1/2", 6" tall.


117
DustRight Vortex Wood Saw Dust Collection System
for use with shop vac. Many extra hoses.

118
13 small specialized pliers and cutters
two are Mark Lindstrom, Sweden. some not marked. All are about 4 to 5 in in length.

119
4 levels & center finding rule
levels range from 10" to 28". Ruler- Tech 24" center finding rule. One is a combination square and light.

120
20 Bonney mechanics wrenches
most of these are the really thin type. quality made.

121
4 pickup truck rail tie down inserts.
looks like these go in the rectangular holes in a pickup truck bed to create tie downs.

122
4 drill bit sets / indexes
Five-Piece drill Master masonry bit set that has 14-in long drill bits . A seven-piece Brad Point wood bit set that has 12-in bits. And there are two indexes one has Brad Point bits and the other regular bits where a few of the smaller ones are mis...




126
Walnut, Oak and Poplar Lumber
All boards are 3/4" thick, walnut boards are 10+" wide and 76 and 92" long, poplars is 7+ " Wide and 72" long and oak board is 2-1/" wide and 72" long.

127
Lot Craftsman Sockets
SAE deepwell and shallow as well as hex key. Includes Snap-On magnetic holder

128
12 PR pliers cutters channelocks +
Names on tools like Craftsman, wizard, Bernard's. some without names.

132
International Harvester 3/4" Drive 1 1/8" Socket
This is a rare socket from a very collectible brand. 999419R1 - 12 point

133
Craftsman combination wrench lot
SAE, 1 1/4" down to tiny.


135
Snap-On 3/8" Ratchet accessories
1 & 6" extensions, spark plug socket & 1/2" adapter & spinner



138
Snap On Tools Corporation Advertising Pouch
Measures 7" x 4". 1218 Harmon Place Minneapolis, Minnesota. I believe this to be from the 1950's. Do you have one in your collection???

139
Snap On Ratchet Driver
RE36797. Has 2 driver bits in the handle. Used.

140
Snap On Yellow Handle Screwdriver Group
3 stubbies and 2 philips head. SDDI x 2, SDDP22, SDDP42, and SDDP31. Used.

141
Snap On Tire Valve Core Tools, Screwdriver
One philips head screwdriver SDDP42 No. 2, and two tire valve core tools TR107A. Black handles, used.

142
Craftsman 3/4" Drive Large Sockets
1 5/8", 1 11/16", 1 3/4", 1 13/16", and 1 7/8". Monster 12 point sockets!


144
Adjustable Roller Stand
16" wide, 16-24" height

145
Reliant DD79 Belt and Disc Sander
6 X 24" belt and 9" disc.



148
Coleman Red Lantern Model 200A
Used condition. These red Coleman lanterns are hot right now!

149
Snap On / Vacuum Grip Pliers Newport PA
The Snap On Vacuum Grip are #387. The Forged Steel Products are #66.


151
5 SAE Snap On 1/2" Drive Sockets
5/8, 11/16, 3/4, 13/16, 7/8. 6 pt. Used.

152
9 Snap On SAE 1/2" Drive Sockets
1/4 thru 7/8. 6 point. Used.

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
May 9th Woodworking Machinist & Mechanic Tool Auction
 Online Only Auction
Auction Date(s)
Bidding Starts: Monday Apr 29
Bidding Ends: Thursday May 9
Auction Location

New Bloomfield, PA 17068
Company
Fahnestock's Auction Service

Contact: Nevin Fahnestock
Phone: (717) 853-4025

Listing Terms and Conditions
Auction Terms & Conditions: 1. By bidding in this auction you are agreeing to all of the terms posted below for this auction so please read the full list of terms. 2. This is an internet only auction. All bidding is online. The bidding for this auction will begin to close on Thursday, May 9th at 7:00pm. Lots will close approximately every 20 seconds. This auction uses a soft close, which provides an authentic auction atmosphere. Items will remain open for one minute after the latest bid. At 6:30pm a new, flashing button will appear allowing you to watch the auction close with a live countdown. This allows you to bid on the next 12 items scheduled to close without refreshing the page. 3. A preview will be held on Thursday, May 9th 2pm-6:00pm at Fahnestock's Auction House at 328 Brady Rd. New Bloomfield, PA 17068. 4. Pickup of your winning purchases will be on Friday, May 10th 12:00pm - 6:00pm at Fahnestock's auction house at 328 Brady Rd. New Bloomfield, PA 17068. An email will be sent to each winning bidder including an invoice. IMPORTANT: If you do not receive an invoice, check your SPAM folder. some of the invoices end up there depending on your mail settings. You should set your mail to "always accept" mail from admin@fahnestockauction.com. 5. All items are offered and sold "AS IS, WHERE IS" with all faults. We encourage you to come to the preview to see and inspect the items. 6. All descriptions are believed accurate but not warranted. Measurements are approximate. 7. NOTICE: Fahnestock Auction may not hold any items for pick up beyond the stated times. Everything should be picked up by 6:00pm on Friday, May 11th unless your items are to be shipped. Buyer will be charged the full amount for items not picked up, and may forfeit their right and claim to the property. 8. Your bid is a contract and you must pay for any items you win. By placing a bid, bidder signifies that they have examined the items to their satisfaction, or that they have chosen not to personally examine them. 9. Fahnestock Auction reserves the right to reject any bid and/or bidder at our sole discretion. 10. Applicable taxes include PA sales tax of 6%. If you have a sales tax exemption for resale or another reason, Fahnestock Auction needs a signed Pennsylvania Exemption Certificate (form REV-1220) on file in order to remove sales tax. Please email List.service.email@gmail.com with your copy. If you are having your items shipped out of state, we do not have to collect sales tax. You are responsible for reporting and paying any sales or use tax charged by your state on any items shipped. 11. This auction has a 13% buyer's premium and 6% PA sales tax. This means that a final bid of $100 plus the buyer's premium constitutes the total purchase price of $113 with sales tax of $6.90 for a total due of $119.78 12. You will receive an invoice listing the items won within a few hours of the auction closing. If you do not receive an email with your invoice, please check your spam folder. Your credit card will automatically be charged. Due to the remote auction pick up site, payment processing at pick-up for this auction will not be available. PLEASE bring a "PAID" invoice copy to pick-up. If your card is declined, you will receive an unpaid invoice with instructions on how to make payment. Our office may contact you to make payment before the pickup. Cards accepted include MasterCard, Visa, American Express and Discover only. 13. Shipping is available for most smaller items in this auction. If you are interested in an item and are not sure if it could be practically shipped, please contact us to help determine that. If you need shipping, after the auction, Fahnestock's will transport your items to "The mail room etc." in Lemoyne PA. at no charge. They will be given a copy of your invoice with your contact information and they will contact you to make shipping arrangements. They can be contacted at 717-975-9991. We have been using them for a long time as our shipping partner, and have received only positive feedback. 14. There will be a $40 returned check fee for any declined check received. 15. Declined credit cards can result in a buyer being banned from participating in future auctions. Fahnestock Auction is a member of the National and State Auctioneers Associations. Non-paying and/or fraudulent bidder names WILL be shared with other auction companies. 16. Buyer will be charged the full amount for items not picked up, and may forfeit their right and claim to the property. Unclaimed lots may incur up to a $25 removal fee based on the size of the items. 17. This is a public auction and not a retail setting. All sales are final. No returns or chargebacks are accepted. 18. Some items may be sold per piece. The bid price is multiplied by the amount of items in the lot. This is shown using the bid price x quantity. (Example "$12.50 x 4" equals a total bid of $50.00).
This 300+ lot tool auction features items from a local private workshop that. Higlights include 60 gal upright 220v air compressor, DeWalt double bevel sliding mitre saw on stand, mechanics tools, power & hand carpenter tools, machinist lathe, DeWalt scroll saw, DeWalt thickness board planer, Milwaukee HD portable band saw. There is also 100�s of small tools & hardware lots.

1

2

3

4

5

6
Husky Pro 60 Gallon Upright Air Compressor
7hp, 135 max psi, 220V, 67" off the skid

5
MORE LOTS TO COME!
CATALOGING IS ON GOING!

7
DeWalt Double Bevel Sliding Compound Miter Saw
mode DW719 with DW723 stand and Laser guide, 12" cut

8
7 pine lumber 1 x 12's +
there are seven 1x12s Four of them are 6 ft long. two of them are 6'-8". One 1x12 8 ft long, and a 1x10 8 ft long. quality pieces of lumber.

9

19
Three Hardware Kits
1 empty, 1 filled with various finishing nails, and one with woodworking items.

20
Central pneumatic air & hose reel
25-Ft hose on reel new in box.

21

22
Drill bit lot
Small bits are Aggressor Blu-Mol brand

23

24

25

26
Snap-on pneumatic gauge set
not sure what it was used with, but it's very oily. One lens on one gauge has a deep scratch or crack.

27

28
AMT 3 caliper set 11" - 12" long
inside outside and straight calipers.

29
Russell Jennings auger bits & drill brace
drill brace is it Dunlop. The truck seems to operate okay. drill bits in wooden case are Russell Jennings.

30
Coleman Propane fuel stove attachment.
Plastic feet, clean burner, bottle empty.

31
4 ZAG hardware kits - some contents
looks like mostly electrical connectors.

32
Stack on hardware kits
4 kits. Two empty, two with partial contents (screws, hooks, pins).

33
Heavy extension cord
Orange extension cord.

34
Router bit lot
Rabbeting bit with bearing set, straight bit, round over.

35

36
Antique Lufkin wood lumber rule ruler
used to measure the board footage in a piece of lumber.

37

38
Blue point or snap-on screw extractor set
Set of 25. Though not marked, I believe them to be blue point or snap-on. Most luck unused some of the smaller ones show some wear.

39

40
Router bit lot.
See pictures.

41
Dewalt Corded Planer
DW680 planer, rabbetig fence, guage plate, carrying case. Clean!!

42

43

44

45
Drill Doctor bit sharpener.
New inbox comes with 2 diamond sharpening wheels.

46
Blue Point Computers tool YA2100
maybe one piece missing as there is an empty space.

47
Mechanics tool lot snap ring pliers & more
K-D, Waldss, Blue Point, Snap-on & others

48
3 drill bit index sets - Brad Point masonry & reg
Firestorm masonry bit parcel set with the three smallest nut present. Brad Poinsett that looks fairly complete, partial set of regular drill bits.

49

50
7 - 24" electrician's drill bits.
run from about 1/8" to 5/8"

51
Pennzoil Motor Oil
5w-30, 5w-20 and sae 30 weights

52
Kreg Shaper Table with Craftsman Professional
Router; router model. 28190, 12.5A, 12-25K rpm

53
Metal tray of rivets and rivet tool
Various sizes of rivets and fasteners.

54
Brass valve and gauge lot
Various brass valves, gauges, and fasteners.

55
Hardware kit with air fittings
Various air fittings, lots of brass.

56
Sentinel commercial door closer
model SN 504 PA. appears unused.

57
Klein nut driver set +
Set of five nut drivers + crank neck electrician screwdriver.

58
41+ var mechanics wrench tool lot
Variety of makers, metric and SAE. The Pittsburgh set is missing 2.

59
20 MAC - Blue Point + 1 Snap On wrench lot
miscellaneous tight wrenches.

60
Misc. tool lot - see pics
Pop riveter and Pop rivets, hammers, carving chisels, Carpenters squares and much more. Review pictures to see everything.

62

63

64

65
DeWalt 10" Compact Table Saw
comes with wooden stand.

66
MAC - Blue Point & other auto mechanic tools
Mac multi-cutter dg1000, Blue point wire tool, AO Duo Check coolant and battery tester, and two other Mac tools.

67
40+ Deltronic machinist inspection pin gauges
a miscellaneous lot of Deltronic pin gauges.

68
Misc clamp and vise lot
bench vise has a 2 -1/4" jaw

69
Blue Point - Matco + mechanics tools
silverline mighty back, Matco tools tight fit angle drill kit, and a blue point screw extractor set. not sure if all parts are there.

70

71

72
Bench Vise
11" in length, locking base.

73
Clamp on Bench Vise
Locking swivel base.

74
Spray paint lot
16 cans, new and partially used.

75
Two extension cords, one 16 ga 100' and the black
looks to be 50' and heavier gauge.

76
Dewalt angle grinder corded
Grinder, blade gard, handle, case and various discs.

77
7 forstner type drill bits
1/2" - 2". Taiwan. a couple still have their coating on them and are probably not used.

78
Machinist dial caliber & micrometer lock
Craftsman 0 to 1-in micrometer English and metric, centech dial caliper, and the second electronic digital caliper without a name.

79
3 LG Yankee spiral ratchet screwdrivers.
these are about 27 in Long fully extended.

80
Craftsman & Dremel rotary tools & stand
Dremel Moto tool drill press model 210 with rotary tool. hand a Craftsman single speed rotary tool.

81

82
Metal Rolling Shop Cart
two tier, Approx 24 x 36? and 32? tall.

83

84

85
Craftsman 12" drive deep socket set
SAE, 22 sockets, magnetic carrying case.

86

87

88
Craftsman Excalibur adjustable dado blade
couple of storage marks but not sure it was ever used.

89

90
Craftsman 1/4" 19 PC socket set
appears to all be there.

91
100's of drill bits
very large lot of drill bits and a couple taps. assorted sizes many divided up into baggies by size.

92
Large Hardware Tote / Carrying Case
Various screws, electrical nuts, conduit connectors, etc

93
Channel Lock Pliers Lot
Adjustable, large adjustable, and cutters.

94
Six Hardware Caddy Totes
hardware show is included. Nuts & bolts, cotter pins etc

95
Snap On 1/4" Drive Ratchet
7 12" long. F 830.

96
Snap On 1/2" Extensions
2", 5" x 2, 9 1/2" extensions.

97

98
BeadLOCK CANON SYSTEM KIT 3/8" & 1/2"
appears to be unused in the original package.

99
Ridgid pipe threading tools
assortment of sizes and two different ratcheting reversible threading heads. 3/4-In threaded pipe handle is not present.

100
8 asst large USA made wrenches
sizes range from 1-1/16" to 1-1/2". these are larger. very heavy duty wrenches ranging up to 17" in length

101
like new Craftsman 1/2" drill in case
very. appears virtually unused.

102
Large lot of tools - see pictures
Clamps, flaring tool, squares and much much more.

103
Snap on socket set SAE
11 socket set. 1/4" to 7/8".

104

105
Hardware Kit Various Taps
Many different sizes.

106

107

108
Raybestos Safe T Gage brake measure tool
New in the box. vintage gage for brakes.

109
MG welding electrode rods - full pack
austentic manganese steel electrode pack. Sealed 10 lbs.

110

111
45 PC Greenfield tap & die lot
most are Greenfield a couple others may not be. these are old enough that the taps are set in wood sleeves in the box. appear to be New Old stock.

112
32 misc Craftsman, Billings and other wrenches
largest is a 1-1/8", smallest 1/4". a variety of makers including Craftsman and Billings.

113

114

115
Wheel Chocks
9 1/2" x 7 1/2", 6" tall.

116

117
DustRight Vortex Wood Saw Dust Collection System
for use with shop vac. Many extra hoses.

118
13 small specialized pliers and cutters
two are Mark Lindstrom, Sweden. some not marked. All are about 4 to 5 in in length.

119
4 levels & center finding rule
levels range from 10" to 28". Ruler- Tech 24" center finding rule. One is a combination square and light.

120
20 Bonney mechanics wrenches
most of these are the really thin type. quality made.

121
4 pickup truck rail tie down inserts.
looks like these go in the rectangular holes in a pickup truck bed to create tie downs.

122
4 drill bit sets / indexes
Five-Piece drill Master masonry bit set that has 14-in long drill bits . A seven-piece Brad Point wood bit set that has 12-in bits. And there are two indexes one has Brad Point bits and the other regular bits where a few of the smaller ones are mis...

123

124

125

126
Walnut, Oak and Poplar Lumber
All boards are 3/4" thick, walnut boards are 10+" wide and 76 and 92" long, poplars is 7+ " Wide and 72" long and oak board is 2-1/" wide and 72" long.

127
Lot Craftsman Sockets
SAE deepwell and shallow as well as hex key. Includes Snap-On magnetic holder

128
12 PR pliers cutters channelocks +
Names on tools like Craftsman, wizard, Bernard's. some without names.

132
International Harvester 3/4" Drive 1 1/8" Socket
This is a rare socket from a very collectible brand. 999419R1 - 12 point

133
Craftsman combination wrench lot
SAE, 1 1/4" down to tiny.

134

135
Snap-On 3/8" Ratchet accessories
1 & 6" extensions, spark plug socket & 1/2" adapter & spinner

136

137

138
Snap On Tools Corporation Advertising Pouch
Measures 7" x 4". 1218 Harmon Place Minneapolis, Minnesota. I believe this to be from the 1950's. Do you have one in your collection???

139
Snap On Ratchet Driver
RE36797. Has 2 driver bits in the handle. Used.

140
Snap On Yellow Handle Screwdriver Group
3 stubbies and 2 philips head. SDDI x 2, SDDP22, SDDP42, and SDDP31. Used.

141
Snap On Tire Valve Core Tools, Screwdriver
One philips head screwdriver SDDP42 No. 2, and two tire valve core tools TR107A. Black handles, used.

142
Craftsman 3/4" Drive Large Sockets
1 5/8", 1 11/16", 1 3/4", 1 13/16", and 1 7/8". Monster 12 point sockets!

143

144
Adjustable Roller Stand
16" wide, 16-24" height

145
Reliant DD79 Belt and Disc Sander
6 X 24" belt and 9" disc.

146

147

148
Coleman Red Lantern Model 200A
Used condition. These red Coleman lanterns are hot right now!

149
Snap On / Vacuum Grip Pliers Newport PA
The Snap On Vacuum Grip are #387. The Forged Steel Products are #66.

150

151
5 SAE Snap On 1/2" Drive Sockets
5/8, 11/16, 3/4, 13/16, 7/8. 6 pt. Used.

152
9 Snap On SAE 1/2" Drive Sockets
1/4 thru 7/8. 6 point. Used.