May 11-14 2020 Online Auction
Listing ID#: 198112

Auction Location

Orlando, FL 32750
Auction Dates and TimesSALE IS COMPLETED
Bidding Starts: Monday May 11
Bidding Ends: Thursday May 14
Auction Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
BAJA Bid LLC

Website: bajabid.com

GoToAuction.com ID#: 3292
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Acceptance of the Terms of Use Welcome to the website of BAJA BID, LLC ("Company", "we" or "us"). The following terms and conditions ("Terms of Use") govern your access to and use of www.bajabid.com (the "Website") and the auction platform offered thereon. Please read the Terms of Use carefully before you start to use the Website. By completing your registration with the Website you accept and agree to be bound and abide by these Terms of Use. This Website is offered and available to users who are 18 years of age or older. By using this Website, you represent and warrant that you are of legal age to form a binding contract with the Company and meet all of the foregoing eligibility requirements. If you do not meet all of these requirements, you must not access or use the Website. Changes to the Terms of Use We may revise and update these Terms of Use from time to time in our sole discretion. All changes are effective immediately when we post them, and apply to all access to and use of the Website thereafter. Your continued use of the Website following the posting of revised Terms of Use means that you accept and agree to the changes. You are expected to check this page each time you access this Website so you are aware of any changes, as they are binding on you. Reliance on Information Posted; Products The information presented on or through the Website is made available by third-party sellers for information purposes. We do not warrant the accuracy, completeness or usefulness of this information. Any reliance you place on such information is strictly at your own risk. We disclaim all liability and responsibility arising from any reliance placed on such materials by you or any other visitor to the Website, or by anyone who may be informed of any of its contents. All products offered for sale and/or auction through the Website ("products") is made available by third-party sellers ("sellers") on an "AS IS" basis without any representations or warranties by us or the seller and no statement anywhere, whether oral or written, whether made on the Website or elsewhere, shall be deemed such a warranty, representation or assumption of liability. We make no representation and warranties, express or implied, as to whether the purchaser acquires any copyrights, trademarks or other intellectual property. You should inspect each product before bidding to determine the condition, and confirm the specifications, of such product. Withdrawal. We reserve the right to withdraw any product before the sale and shall have no liability whatsoever for such withdrawal. Bidding You must honor all successful bids placed in any auction. In the event you complete a successful bid, you will be obligated to pay the full amount of the successful bid and shall complete the transaction with the Company or the respective seller. A "successful bid" is defined as the highest bid in a regular auction (one with no reserve price) or the highest bid in a reserve auction that meets or exceeds the reserve price. By bidding in an auction you agree to honor all listed terms of sale including, but not limited to, method of payment, appropriate state sales tax, and shipping and handling fees. You are required to provide accurate and complete personal information on your registration and you hereby further agree that whether you are acting as a principal, an agent, or an officer or director of a corporation, or otherwise in any capacity whatsoever, you are personally liable for the payment of the purchase price, buyer's premium and taxes payable with respect to any product auction which you are the successful bidder By bidding on a product you represent and warrant that any bids placed by you are not the product of any collusive or other anti-competitive agreement and are otherwise consistent with federal and state antitrust law. We reserve the right to reject any bid, in our sole discretion. Final Sale All purchases through the Website or as a result of visits made by you are governed by these Terms of Use. ALL PURCHASES MUST BE PAID IN FULL WITHIN 48 HOURS OF RECEIPT OF INVOICE. Invoices will be e-mailed within 24 hours of auction closing. All sales are subject to sales tax, unless buyer provides Company with a valid tax exempt form. Payment shall be made by cash, electronic funds transfer, cashiers check or a personal or company check accompanied by a bank letter of credit. Title to a product will not pass until we receive full payment in the form described above. In addition to other remedies available to us by law, in the event payment is not made in full within 48 hours of receipt of invoice, we reserve the right (i) to impose interest on the amount due from the date of sale equal to 18% percent per annum, or the highest rate permissible by law, whichever shall be less, and/or (ii) treat the purchased product as property of the bidder and hold possession and/or resell such product without notice and use the sale proceeds therefrom to recover any loss or cost incurred due to bidder's failure to pay. Rigging/Removal of a sold product is the sole responsibility of the buyer and must be completed by the posted date. Rigging/Removal may not begin until payment has been made in full and the auction sale is complete. Recommendation or approval of Riggers by Company, by any employee or agent of Company, or by any affiliated entity of Company shall be done only as an accommodation to the buyer. Such recommendation or approval shall not cause Company to be liable in any way for any act or omission of any such Rigger. Selection of a Rigger is solely within the discretion of the buyer, and the buyer acknowledges and agrees that it shall have no rights or remedies against Company, any employee or agent of Company or any affiliate of Company based upon any act or omission by a Rigger. Geographic Restrictions The owner of the Website is based in the state of Florida in the United States. We provide this Website for use only by persons located in the United States. We make no claims that the Website or any of its content is accessible or appropriate outside of the United States. Access to the Website may not be legal by certain persons or in certain countries. If you access the Website from outside the United States, you do so on your own initiative and are responsible for compliance with local laws. Disclaimer of Warranties For the avoidance of doubt, COMPANY MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO ANY PRODUCT, INCLUDING ANY (a) WARRANTY OF MERCHANTABILITY; (b) WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE; (c) WARRANTY OF TITLE; OR (d) WARRANTY AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OF A THIRD PARTY; WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. You understand that we cannot and do not guarantee or warrant that files available for downloading from the internet or the Website will be free of viruses or other destructive code. You are responsible for implementing sufficient procedures and checkpoints to satisfy your particular requirements for anti-virus protection and accuracy of data input and output, and for maintaining a means external to our site for any reconstruction of any lost data. WE WILL NOT BE LIABLE FOR ANY LOSS OR DAMAGE CAUSED BY A DISTRIBUTED DENIAL-OF-SERVICE ATTACK, VIRUSES OR OTHER TECHNOLOGICALLY HARMFUL MATERIAL THAT MAY INFECT YOUR COMPUTER EQUIPMENT, COMPUTER PROGRAMS, DATA OR OTHER PROPRIETARY MATERIAL DUE TO YOUR USE OF THE WEBSITE OR ANY SERVICES OR ITEMS OBTAINED THROUGH THE WEBSITE OR TO YOUR DOWNLOADING OF ANY MATERIAL POSTED ON IT, OR ON ANY WEBSITE LINKED TO IT. YOUR USE OF THE WEBSITE, ITS CONTENT AND ANY SERVICES OR ITEMS OBTAINED THROUGH THE WEBSITE IS AT YOUR OWN RISK. THE WEBSITE, ITS CONTENT AND ANY SERVICES OR ITEMS OBTAINED THROUGH THE WEBSITE ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS, WITHOUT ANY WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED. NEITHER THE COMPANY NOR ANY PERSON ASSOCIATED WITH THE COMPANY MAKES ANY WARRANTY OR REPRESENTATION WITH RESPECT TO THE COMPLETENESS, SECURITY, RELIABILITY, QUALITY, ACCURACY OR AVAILABILITY OF THE WEBSITE. WITHOUT LIMITING THE FOREGOING, NEITHER THE COMPANY NOR ANYONE ASSOCIATED WITH THE COMPANY REPRESENTS OR WARRANTS THAT THE WEBSITE, ITS CONTENT OR ANY SERVICES OR ITEMS OBTAINED THROUGH THE WEBSITE WILL BE ACCURATE, RELIABLE, ERROR-FREE OR UNINTERRUPTED, THAT DEFECTS WILL BE CORRECTED, THAT OUR SITE OR THE SERVER THAT MAKES IT AVAILABLE ARE FREE OF VIRUSES OR OTHER HARMFUL COMPONENTS OR THAT THE WEBSITE OR ANY SERVICES OR ITEMS OBTAINED THROUGH THE WEBSITE WILL OTHERWISE MEET YOUR NEEDS OR EXPECTATIONS. THE COMPANY HEREBY DISCLAIMS ALL WARRANTIES OF ANY KIND, WHETHER EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT AND FITNESS FOR PARTICULAR PURPOSE. THE FOREGOING DOES NOT AFFECT ANY WARRANTIES WHICH CANNOT BE EXCLUDED OR LIMITED UNDER APPLICABLE LAW. Limitation on Liability IN NO EVENT WILL THE COMPANY, ITS AFFILIATES OR THEIR LICENSORS, SERVICE PROVIDERS, EMPLOYEES, AGENTS, OFFICERS OR DIRECTORS BE LIABLE FOR DAMAGES OF ANY KIND, UNDER ANY LEGAL THEORY, ARISING OUT OF OR IN CONNECTION WITH YOUR USE, OR INABILITY TO USE, THE WEBSITE, ANY WEBSITES LINKED TO IT, ANY CONTENT ON THE WEBSITE OR SUCH OTHER WEBSITES OR ANY PRODUCT OBTAINED THROUGH THE WEBSITE OR SUCH OTHER WEBSITES, INCLUDING ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, INCLUDING BUT NOT LIMITED TO, PERSONAL INJURY, PAIN AND SUFFERING, EMOTIONAL DISTRESS, LOSS OF REVENUE, LOSS OF PROFITS, LOSS OF BUSINESS OR ANTICIPATED SAVINGS, LOSS OF USE, LOSS OF GOODWILL, LOSS OF DATA, AND WHETHER CAUSED BY TORT (INCLUDING NEGLIGENCE), BREACH OF CONTRACT OR OTHERWISE, EVEN IF FORESEEABLE. THE FOREGOING DOES NOT AFFECT ANY LIABILITY WHICH CANNOT BE EXCLUDED OR LIMITED UNDER APPLICABLE LAW. Indemnification You agree to defend, indemnify and hold harmless the Company, its affiliates, licensors and service providers, and its and their respective officers, directors, employees, contractors, agents, licensors, suppliers, successors and assigns from and against any claims, liabilities, damages, judgments, awards, losses, costs, expenses or fees (including reasonable attorneys' fees) arising out of or relating to your violation of these Terms of Use or your use of the Website, including, but not limited to, any bid on, or purchase of, a Product. Governing Law and Jurisdiction All matters relating to the Website and these Terms of Use and any dispute or claim arising therefrom or related thereto (in each case, including non-contractual disputes or claims), shall be governed by and construed in accordance with the internal laws of the State of Florida without giving effect to any choice or conflict of law provision or rule (whether of the State of Florida or any other jurisdiction). Any legal suit, action or proceeding arising out of, or related to, these Terms of Use or the Website shall be instituted exclusively in the federal courts of the United States or the courts of the State of Florida, although we retain the right to bring any suit, action or proceeding against you for breach of these Terms of Use in your country of residence or any other relevant country. You waive any and all objections to the exercise of jurisdiction over you by such courts and to venue in such courts. Limitation on Time to File Claims ANY CAUSE OF ACTION OR CLAIM YOU MAY HAVE ARISING OUT OF OR RELATING TO THESE TERMS OF USE OR THE WEBSITE MUST BE COMMENCED WITHIN ONE (1) YEAR AFTER THE CAUSE OF ACTION ACCRUES, OTHERWISE, SUCH CAUSE OF ACTION OR CLAIM IS PERMANENTLY BARRED. Waiver and Severability No waiver of by the Company of any term or condition set forth in these Terms of Use shall be deemed a further or continuing waiver of such term or condition or a waiver of any other term or condition, and any failure of the Company to assert a right or provision under these Terms of Use shall not constitute a waiver of such right or provision. If any provision of these Terms of Use is held by a court or other tribunal of competent jurisdiction to be invalid, illegal or unenforceable for any reason, such provision shall be eliminated or limited to the minimum extent such that the remaining provisions of the Terms of Use will continue in full force and effect. Entire Agreement The Terms of Use constitute the sole and entire agreement between you and Company with respect to the Website and supersede all prior and contemporaneous understandings, agreements, representations and warranties, both written and oral, with respect to the Website.
Listing Information
BAJA Bid welcomes you to our Online Internet Auction! We specialize in the equipment specifically utilized in the electronics manufacturing and assembly industry. Bidders may be invited to preview and inspect all of the equipment prior to the beginning of the auction. All on-site preview / inspection visits must be scheduled in advance and completed during normal business hours (9 am - 3 pm) during the preview period. The removal of all equipment must be completed before the deadline date. A 18% Buyer's Premium will be added to the final sale price and included on the corresponding invoice. All appropriate sales taxes will be included in the total price unless the required tax exempt documentation is provided by the buyer. All winning bidders will be contacted after the completion of the auction. An invoice will be provided detailing the items that were purchased and the payment is due at that time. This entire payment must be received within 2 business days after receipt of the corresponding invoice. The preferred payment methods are cash, certified check or bank wire transfer. American Express, Visa or MasterCard credit cards may be accepted depending on the final sale price and specific conditions. The payment must be paid in US dollars. The sellers have the right to set reserve prices and/or purchase their own equipment.


1
2001 Mydata MY15 SMT Pick & Place
Serial: 15108 Features: S/W: 2.4.6b Electrical Two-Pole Test Electrical Transistor Test Optical Centering Hydra Linescan Item Location: Orlando, Florida USA

2
2001 Mydata MY15 SMT Pick & Place
Serial: 15111 Features: Electrical Two-Pole Test Electrical Transistor Test Optical Centering Hydra Linescan Item Location: Orlando, Florida USA

3
Electro-Design EP710W508 Conveyor
Item Location: Orlando, Florida USA

5
(10) Mydata 8-4.7mm Agilis Feeder Inserts
PN: L-014-1319 Item Location: Orlando, Florida USA

10
(10) Mydata 8-4.7mm Agilis Feeder Inserts
PN: L-014-1319 Item Location: Orlando, Florida USA

15
(10) Mydata 8-4.7mm Agilis Feeder Inserts
PN: L-014-1319 Item Location: Orlando, Florida USA

20
(10) Mydata 8-4.7mm Agilis Feeder Inserts
PN: L-014-1319 Item Location: Orlando, Florida USA

25
(10) Mydata 8-4.7mm Agilis Feeder Inserts
PN: L-014-1319 Item Location: Orlando, Florida USA

30
(10) Mydata 8-4.7mm Agilis Feeder Inserts
PN: L-014-1319 Item Location: Orlando, Florida USA

35
(10) Mydata 8-4.7mm Agilis Feeder Inserts
PN: L-014-1319 Item Location: Orlando, Florida USA

40
(10) Mydata 8-4.7mm Agilis Feeder Inserts
PN: L-014-1319 Item Location: Orlando, Florida USA

45
(3) Mydata 8-4.7mm Agilis Feeder Inserts
PN: L-014-1319 Item Location: Orlando, Florida USA

60
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

50
(6) Mydata 8-5.4mm Agilis Feeder Inserts
Features: PN: L-014-1321 Item Location: Orlando, Florida USA

55
(5) Mydata 8-5.4mm Agilis Feeder Inserts
Features: PN: L-014-1321 Item Location: Orlando, Florida USA

65
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

70
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

75
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

80
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

85
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

90
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

95
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

105
(4) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

110
(5) Mydata 8-3.7mm Agilis Feeder Inserts
PN: L-014-1395 Item Location: Orlando, Florida USA

115
(5) Mydata 8-3.7mm Agilis Feeder Inserts
PN: L-014-1395 Item Location: Orlando, Florida USA

120
(5) Mydata 8-3.7mm Agilis Feeder Inserts
PN: L-014-1395 Item Location: Orlando, Florida USA

125
(5) Mydata 8-3.7mm Agilis Feeder Inserts
PN: L-014-1395 Item Location: Orlando, Florida USA

130
(5) Mydata 8-3.7mm Agilis Feeder Inserts
PN: L-014-1395 Item Location: Orlando, Florida USA

135
(5) Mydata 8-3.7mm Agilis Feeder Inserts
PN: L-014-1395 Item Location: Orlando, Florida USA

150
(3) Mydata 8-3.7mm Agilis Feeder Inserts
PN: L-014-1395 Item Location: Orlando, Florida USA

155
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

140
(5) Mydata 8-3.7mm Agilis Feeder Inserts
Features: PN: L-014-1395 Item Location: Orlando, Florida USA

160
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

145
(5) Mydata 8-3.7mm Agilis Feeder Inserts
Features: PN: L-014-1395 Item Location: Orlando, Florida USA

165
(6) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

170
(5) Mydata 8-3.7mm Agilis Feeder Inserts
PN: L-014-1395 Item Location: Orlando, Florida USA

175
(5) Mydata 8-3.7mm Agilis Feeder Inserts
PN: L-014-1395 Item Location: Orlando, Florida USA

185
Mydata LM8 Agilis Feeder Magazine
PN: L-014-1561 Item Location: Orlando, Florida USA

190
Mydata LM8 Agilis Feeder Magazine
PN: L-014-1561 Item Location: Orlando, Florida USA

205
Mydata M8 Agilis Feeder Magazine
PN: L-014-1471 Item Location: Orlando, Florida USA

210
Mydata M8 Agilis Feeder Magazine
PN: L-014-1471 Item Location: Orlando, Florida USA

180
(6) Mydata 8-3.7mm Agilis Feeder Inserts
Features: PN: L-014-1395 Item Location: Orlando, Florida USA

215
Mydata M8 Agilis Feeder Magazine
PN: L-014-1471 Item Location: Orlando, Florida USA

220
Mydata M8 Agilis Feeder Magazine
PN: L-014-1471 Item Location: Orlando, Florida USA

225
Mydata M8 Agilis Feeder Magazine
PN: L-014-1471 Item Location: Orlando, Florida USA

195
Mydata LM8 Agilis Feeder Magazine
Features: PN: L-014-1561 Item Location: Orlando, Florida USA

230
Mydata M8 Agilis Feeder Magazine
PN: L-014-1471 Item Location: Orlando, Florida USA

200
Mydata LM8 Agilis Feeder Magazine
Features: PN: L-014-1561 Item Location: Orlando, Florida USA

235
Mydata M8 Agilis Feeder Magazine
PN: L-014-1471 Item Location: Orlando, Florida USA

240
Mydata M8 Agilis Feeder Magazine
PN: L-014-1471 Item Location: Orlando, Florida USA

245
(2) Mydata TM16C Feeder Magazine
Item Location: Orlando, Florida USA

250
(3) Mydata TM1216C Feeder Magazine
Item Location: Orlando, Florida USA

255
(3) Mydata TM24D Feeder Magazine
Item Location: Orlando, Florida USA

260
(2) Mydata TM32D Feeder Magazine
Item Location: Orlando, Florida USA

265
(2) Mydata TM8C Feeder Magazine
Item Location: Orlando, Florida USA

270
(2) Mydata TM12C Feeder Magazine
Item Location: Orlando, Florida USA

275
(3) Mydata VMF30 Feeder Magazine
Item Location: Orlando, Florida USA

315
2006 VJ Electronix SRT-1948 BGA Rework System
Includes assortment of nozzles as pictured Max. Board Size 18" X 22" (455mm X 560mm) Min. Component Size 0.100" (2.5mm) Placement 0.002" (50µ) mean + 3s Compliance CE mark Top Heater 1.6kW Focused Convection Bottom Heater 4.0kW Convection Plenum Se...

320
Metcal APR-5000-XLS BGA Rework Machine
Large boards up to 24.5" x 24.5" (622mm x 622mm) to components down to 0.020" x 0.010" (0.5mm x 0.25mm). The flexible APR-5000-XLS System incorporates dual stage pre-heaters and has the thermal capacity and control to execute precise profiles of both...

335
Mitutoyo PH-A14 Optical Comparator
Serial: 504024 Item Location: Orlando, Florida USA

340
2005 ASM AB559A-06 Rotary Head Wedge Bonder
Serial: 59A-18-461 Item Location: Orlando, Florida USA

345
2010 JFP Microtechnic PP5 Die Bonder
Serial: 10-222 Item Location: Orlando, Florida USA

350
2001 F&K Delvotec 6200 Wire Bonder
Serial: _03826 Item Location: Orlando, Florida USA

355
1997 Camelot 1414 Liquid Dispensing System
Serial: 1414 2409 Item Location: Orlando, Florida USA

365
PVA PVA650 Selective Coating Dispensing System
*** WATCH VIDEO *** Serial: W2730 Item Location: Orlando, Florida USA

360
1997 Camelot 1414 Liquid Dispensing System
Serial: 1414 2410 Item Location: Orlando, Florida USA

370
Yestech YTV-F1 Inline AOI
"Parts Machine" Serial: V30608478 Item Location: Orlando, Florida USA

375
2014 Iljin ACC-80LE Conveyor
Serial: IJ01214-3024 Item Location: Orlando, Florida USA

380
2000 Mydata Tex Tray Tower
Serial: 122 Item Location: Orlando, Florida USA

385
2007 Mydata Tex Tray Tower
Serial: 382 Item Location: Orlando, Florida USA

390
2001 Vitronics XPM820 Reflow Oven
Left to Right Edge Rails Mesh Belt Serial: XA80805 Item Location: Orlando, Florida USA

395
Genrad 2286i In-Circuit Tester
1 - Controller, 1- MTG, 1 - HSC, 1 - CST20 1 - DS Reference, 1 - ICA, 20 - Combo 1 1 - DSM, 1 - AFTM, 6 - DUT P/S Features: Windows XP S/W: 5.8 Item Location: Tampa, Florida USA

400
JPW Design & Mfg Industrial Oven
Serial: _000751.01 Item Location: Orlando, Florida USA

415
Nordson Yestech YTV-F1 AOI
Serial: V30608479 Features: Software - 2.7 6 - Cameras Standard Lighting System Item Location: Orlando, Florida USA

405
Nordson Asymtek CW-306 UV Curing System
Serial: 775203B Item Location: Orlando, Florida USA

410
2013 Thermotron SE-300-10-10 Environmental Chamber
Dual 10HP Cascade Refrigeration Thermotron 8800 Controller Exceeds 10C Ramp Rate Per Minute Interior Dimensions : 24 x 26.25 x 28 inches Weight : 1500 pounds Exterior Dimensions : 35 x 70 x 78 inches Serial: 44700 Item Location: Orlando, Florida US...

420
2005 Dek Horizon 02i Screen Printer
Windows XP O/S Instinctiv Software Blue Underscreen Cleaner Adjustable Screen Mount Green Camera Serial: 285944 Item Location: Orlando, Florida USA

425
Nordson Yestech YTV-2050 AOI
Software - 2.7 1 - Top Down Camera 1 - High Mag Camera Item Location: Orlando, Florida USA

500
Agilent 3070 Series 3 In-Circuit Tester
1-B180L Controller 4- ASRU C Cards 4-Control XT Cards 36-Hybrid Double Density Cards 4-6624 DUT Power Supplies 1-External Power Bay 1-PVF "Pin Verification Fixture" Item Location: Tampa, Florida USA

430
2006 Dek Horizon 02i Screen Printer
Windows XP O/S Instinctiv Software Vortex Underscreen Cleaner with Vacuum Adjustable Screen Mount [Allows 20-29" Stencils without adapter] Squeegee Pressure Transducer 620mm Long Board Option Automatic Fiducial Setup Serial: 290264 Item Location: Orl...

435
2007 Dek Horizon 03i Screen Printer
Windows XP O/S Instinctiv Software Blue Underscreen Cleaner with Vacuum 520mm Long Board Clamping System 620mm Long Board Option Automatic Fiducial Setup Serial: 292767 Item Location: Orlando, Florida USA

450
2011 Heller 1809MKIII Reflow Oven
9 Heating Zones 2 Cooling Zones Edge Rails Mesh Belt Edge Oilers 31K Hours Item Location: Orlando, Florida USA

550
2004 Vitronics XPM2-1240 Reflow Oven
Left to Right Edge Rails Serial: X1N120009 Item Location: Orlando, Florida USA

560
2011 Orbotech Symbion S36 AOI
"Parts Machine" Serial: FL114001 Item Location: Orlando, Florida USA

585
2010 Universal 4990E Genesis SMT Pick & Place
*** WATCH VIDEOS *** Windows XP SW: 8.5.5.1 Lightning Feature Cameras: OTHC (Narrow fov) beam 1 firewire 1394 .55 per pixel. OTHC (Narrow fov) beam 2 firewire 1394 .55 per pixel. Pecs: pec beam1 firewire 1394 1.0 mil per pixel. pec beam 2 firewire 13...

645
2011 Orbotech Symbion S36 AOI
Serial: FL113009 Item Location: Orlando, Florida USA

665
2008 Agilent 5DX Series 5000 X-Ray
Windows XP SW: 8.5 Serial: SG42711098 Item Location: Orlando, Florida USA

670
2005 Vitronics 6748 Selective Soldering System
Serial: _0509783301 Item Location: Orlando, Florida USA

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Sponsored Links

May 11-14 2020 Online Auction

BAJA Bid LLC

BAJA Bid LLC


Contact:
Phone:
Sale Location

Orlando, FL 32750
Sale Dates and Times
Sale Terms and Conditions
Acceptance of the Terms of Use Welcome to the website of BAJA BID, LLC ("Company", "we" or "us"). The following terms and conditions ("Terms of Use") govern your access to and use of www.bajabid.com (the "Website") and the auction platform offered thereon. Please read the Terms of Use carefully before you start to use the Website. By completing your registration with the Website you accept and agree to be bound and abide by these Terms of Use. This Website is offered and available to users who are 18 years of age or older. By using this Website, you represent and warrant that you are of legal age to form a binding contract with the Company and meet all of the foregoing eligibility requirements. If you do not meet all of these requirements, you must not access or use the Website. Changes to the Terms of Use We may revise and update these Terms of Use from time to time in our sole discretion. All changes are effective immediately when we post them, and apply to all access to and use of the Website thereafter. Your continued use of the Website following the posting of revised Terms of Use means that you accept and agree to the changes. You are expected to check this page each time you access this Website so you are aware of any changes, as they are binding on you. Reliance on Information Posted; Products The information presented on or through the Website is made available by third-party sellers for information purposes. We do not warrant the accuracy, completeness or usefulness of this information. Any reliance you place on such information is strictly at your own risk. We disclaim all liability and responsibility arising from any reliance placed on such materials by you or any other visitor to the Website, or by anyone who may be informed of any of its contents. All products offered for sale and/or auction through the Website ("products") is made available by third-party sellers ("sellers") on an "AS IS" basis without any representations or warranties by us or the seller and no statement anywhere, whether oral or written, whether made on the Website or elsewhere, shall be deemed such a warranty, representation or assumption of liability. We make no representation and warranties, express or implied, as to whether the purchaser acquires any copyrights, trademarks or other intellectual property. You should inspect each product before bidding to determine the condition, and confirm the specifications, of such product. Withdrawal. We reserve the right to withdraw any product before the sale and shall have no liability whatsoever for such withdrawal. Bidding You must honor all successful bids placed in any auction. In the event you complete a successful bid, you will be obligated to pay the full amount of the successful bid and shall complete the transaction with the Company or the respective seller. A "successful bid" is defined as the highest bid in a regular auction (one with no reserve price) or the highest bid in a reserve auction that meets or exceeds the reserve price. By bidding in an auction you agree to honor all listed terms of sale including, but not limited to, method of payment, appropriate state sales tax, and shipping and handling fees. You are required to provide accurate and complete personal information on your registration and you hereby further agree that whether you are acting as a principal, an agent, or an officer or director of a corporation, or otherwise in any capacity whatsoever, you are personally liable for the payment of the purchase price, buyer's premium and taxes payable with respect to any product auction which you are the successful bidder By bidding on a product you represent and warrant that any bids placed by you are not the product of any collusive or other anti-competitive agreement and are otherwise consistent with federal and state antitrust law. We reserve the right to reject any bid, in our sole discretion. Final Sale All purchases through the Website or as a result of visits made by you are governed by these Terms of Use. ALL PURCHASES MUST BE PAID IN FULL WITHIN 48 HOURS OF RECEIPT OF INVOICE. Invoices will be e-mailed within 24 hours of auction closing. All sales are subject to sales tax, unless buyer provides Company with a valid tax exempt form. Payment shall be made by cash, electronic funds transfer, cashiers check or a personal or company check accompanied by a bank letter of credit. Title to a product will not pass until we receive full payment in the form described above. In addition to other remedies available to us by law, in the event payment is not made in full within 48 hours of receipt of invoice, we reserve the right (i) to impose interest on the amount due from the date of sale equal to 18% percent per annum, or the highest rate permissible by law, whichever shall be less, and/or (ii) treat the purchased product as property of the bidder and hold possession and/or resell such product without notice and use the sale proceeds therefrom to recover any loss or cost incurred due to bidder's failure to pay. Rigging/Removal of a sold product is the sole responsibility of the buyer and must be completed by the posted date. Rigging/Removal may not begin until payment has been made in full and the auction sale is complete. Recommendation or approval of Riggers by Company, by any employee or agent of Company, or by any affiliated entity of Company shall be done only as an accommodation to the buyer. Such recommendation or approval shall not cause Company to be liable in any way for any act or omission of any such Rigger. Selection of a Rigger is solely within the discretion of the buyer, and the buyer acknowledges and agrees that it shall have no rights or remedies against Company, any employee or agent of Company or any affiliate of Company based upon any act or omission by a Rigger. Geographic Restrictions The owner of the Website is based in the state of Florida in the United States. We provide this Website for use only by persons located in the United States. We make no claims that the Website or any of its content is accessible or appropriate outside of the United States. Access to the Website may not be legal by certain persons or in certain countries. If you access the Website from outside the United States, you do so on your own initiative and are responsible for compliance with local laws. Disclaimer of Warranties For the avoidance of doubt, COMPANY MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO ANY PRODUCT, INCLUDING ANY (a) WARRANTY OF MERCHANTABILITY; (b) WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE; (c) WARRANTY OF TITLE; OR (d) WARRANTY AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OF A THIRD PARTY; WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. You understand that we cannot and do not guarantee or warrant that files available for downloading from the internet or the Website will be free of viruses or other destructive code. You are responsible for implementing sufficient procedures and checkpoints to satisfy your particular requirements for anti-virus protection and accuracy of data input and output, and for maintaining a means external to our site for any reconstruction of any lost data. WE WILL NOT BE LIABLE FOR ANY LOSS OR DAMAGE CAUSED BY A DISTRIBUTED DENIAL-OF-SERVICE ATTACK, VIRUSES OR OTHER TECHNOLOGICALLY HARMFUL MATERIAL THAT MAY INFECT YOUR COMPUTER EQUIPMENT, COMPUTER PROGRAMS, DATA OR OTHER PROPRIETARY MATERIAL DUE TO YOUR USE OF THE WEBSITE OR ANY SERVICES OR ITEMS OBTAINED THROUGH THE WEBSITE OR TO YOUR DOWNLOADING OF ANY MATERIAL POSTED ON IT, OR ON ANY WEBSITE LINKED TO IT. YOUR USE OF THE WEBSITE, ITS CONTENT AND ANY SERVICES OR ITEMS OBTAINED THROUGH THE WEBSITE IS AT YOUR OWN RISK. THE WEBSITE, ITS CONTENT AND ANY SERVICES OR ITEMS OBTAINED THROUGH THE WEBSITE ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS, WITHOUT ANY WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED. NEITHER THE COMPANY NOR ANY PERSON ASSOCIATED WITH THE COMPANY MAKES ANY WARRANTY OR REPRESENTATION WITH RESPECT TO THE COMPLETENESS, SECURITY, RELIABILITY, QUALITY, ACCURACY OR AVAILABILITY OF THE WEBSITE. WITHOUT LIMITING THE FOREGOING, NEITHER THE COMPANY NOR ANYONE ASSOCIATED WITH THE COMPANY REPRESENTS OR WARRANTS THAT THE WEBSITE, ITS CONTENT OR ANY SERVICES OR ITEMS OBTAINED THROUGH THE WEBSITE WILL BE ACCURATE, RELIABLE, ERROR-FREE OR UNINTERRUPTED, THAT DEFECTS WILL BE CORRECTED, THAT OUR SITE OR THE SERVER THAT MAKES IT AVAILABLE ARE FREE OF VIRUSES OR OTHER HARMFUL COMPONENTS OR THAT THE WEBSITE OR ANY SERVICES OR ITEMS OBTAINED THROUGH THE WEBSITE WILL OTHERWISE MEET YOUR NEEDS OR EXPECTATIONS. THE COMPANY HEREBY DISCLAIMS ALL WARRANTIES OF ANY KIND, WHETHER EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT AND FITNESS FOR PARTICULAR PURPOSE. THE FOREGOING DOES NOT AFFECT ANY WARRANTIES WHICH CANNOT BE EXCLUDED OR LIMITED UNDER APPLICABLE LAW. Limitation on Liability IN NO EVENT WILL THE COMPANY, ITS AFFILIATES OR THEIR LICENSORS, SERVICE PROVIDERS, EMPLOYEES, AGENTS, OFFICERS OR DIRECTORS BE LIABLE FOR DAMAGES OF ANY KIND, UNDER ANY LEGAL THEORY, ARISING OUT OF OR IN CONNECTION WITH YOUR USE, OR INABILITY TO USE, THE WEBSITE, ANY WEBSITES LINKED TO IT, ANY CONTENT ON THE WEBSITE OR SUCH OTHER WEBSITES OR ANY PRODUCT OBTAINED THROUGH THE WEBSITE OR SUCH OTHER WEBSITES, INCLUDING ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, INCLUDING BUT NOT LIMITED TO, PERSONAL INJURY, PAIN AND SUFFERING, EMOTIONAL DISTRESS, LOSS OF REVENUE, LOSS OF PROFITS, LOSS OF BUSINESS OR ANTICIPATED SAVINGS, LOSS OF USE, LOSS OF GOODWILL, LOSS OF DATA, AND WHETHER CAUSED BY TORT (INCLUDING NEGLIGENCE), BREACH OF CONTRACT OR OTHERWISE, EVEN IF FORESEEABLE. THE FOREGOING DOES NOT AFFECT ANY LIABILITY WHICH CANNOT BE EXCLUDED OR LIMITED UNDER APPLICABLE LAW. Indemnification You agree to defend, indemnify and hold harmless the Company, its affiliates, licensors and service providers, and its and their respective officers, directors, employees, contractors, agents, licensors, suppliers, successors and assigns from and against any claims, liabilities, damages, judgments, awards, losses, costs, expenses or fees (including reasonable attorneys' fees) arising out of or relating to your violation of these Terms of Use or your use of the Website, including, but not limited to, any bid on, or purchase of, a Product. Governing Law and Jurisdiction All matters relating to the Website and these Terms of Use and any dispute or claim arising therefrom or related thereto (in each case, including non-contractual disputes or claims), shall be governed by and construed in accordance with the internal laws of the State of Florida without giving effect to any choice or conflict of law provision or rule (whether of the State of Florida or any other jurisdiction). Any legal suit, action or proceeding arising out of, or related to, these Terms of Use or the Website shall be instituted exclusively in the federal courts of the United States or the courts of the State of Florida, although we retain the right to bring any suit, action or proceeding against you for breach of these Terms of Use in your country of residence or any other relevant country. You waive any and all objections to the exercise of jurisdiction over you by such courts and to venue in such courts. Limitation on Time to File Claims ANY CAUSE OF ACTION OR CLAIM YOU MAY HAVE ARISING OUT OF OR RELATING TO THESE TERMS OF USE OR THE WEBSITE MUST BE COMMENCED WITHIN ONE (1) YEAR AFTER THE CAUSE OF ACTION ACCRUES, OTHERWISE, SUCH CAUSE OF ACTION OR CLAIM IS PERMANENTLY BARRED. Waiver and Severability No waiver of by the Company of any term or condition set forth in these Terms of Use shall be deemed a further or continuing waiver of such term or condition or a waiver of any other term or condition, and any failure of the Company to assert a right or provision under these Terms of Use shall not constitute a waiver of such right or provision. If any provision of these Terms of Use is held by a court or other tribunal of competent jurisdiction to be invalid, illegal or unenforceable for any reason, such provision shall be eliminated or limited to the minimum extent such that the remaining provisions of the Terms of Use will continue in full force and effect. Entire Agreement The Terms of Use constitute the sole and entire agreement between you and Company with respect to the Website and supersede all prior and contemporaneous understandings, agreements, representations and warranties, both written and oral, with respect to the Website.
Listing Details
BAJA Bid welcomes you to our Online Internet Auction! We specialize in the equipment specifically utilized in the electronics manufacturing and assembly industry. Bidders may be invited to preview and inspect all of the equipment prior to the beginning of the auction. All on-site preview / inspection visits must be scheduled in advance and completed during normal business hours (9 am - 3 pm) during the preview period. The removal of all equipment must be completed before the deadline date. A 18% Buyer's Premium will be added to the final sale price and included on the corresponding invoice. All appropriate sales taxes will be included in the total price unless the required tax exempt documentation is provided by the buyer. All winning bidders will be contacted after the completion of the auction. An invoice will be provided detailing the items that were purchased and the payment is due at that time. This entire payment must be received within 2 business days after receipt of the corresponding invoice. The preferred payment methods are cash, certified check or bank wire transfer. American Express, Visa or MasterCard credit cards may be accepted depending on the final sale price and specific conditions. The payment must be paid in US dollars. The sellers have the right to set reserve prices and/or purchase their own equipment.


1
2001 Mydata MY15 SMT Pick & Place
Serial: 15108 Features: S/W: 2.4.6b Electrical Two-Pole Test Electrical Transistor Test Optical Centering Hydra Linescan Item Location: Orlando, Florida USA

2
2001 Mydata MY15 SMT Pick & Place
Serial: 15111 Features: Electrical Two-Pole Test Electrical Transistor Test Optical Centering Hydra Linescan Item Location: Orlando, Florida USA

3
Electro-Design EP710W508 Conveyor
Item Location: Orlando, Florida USA

5
(10) Mydata 8-4.7mm Agilis Feeder Inserts
PN: L-014-1319 Item Location: Orlando, Florida USA

10
(10) Mydata 8-4.7mm Agilis Feeder Inserts
PN: L-014-1319 Item Location: Orlando, Florida USA

15
(10) Mydata 8-4.7mm Agilis Feeder Inserts
PN: L-014-1319 Item Location: Orlando, Florida USA

20
(10) Mydata 8-4.7mm Agilis Feeder Inserts
PN: L-014-1319 Item Location: Orlando, Florida USA

25
(10) Mydata 8-4.7mm Agilis Feeder Inserts
PN: L-014-1319 Item Location: Orlando, Florida USA

30
(10) Mydata 8-4.7mm Agilis Feeder Inserts
PN: L-014-1319 Item Location: Orlando, Florida USA

35
(10) Mydata 8-4.7mm Agilis Feeder Inserts
PN: L-014-1319 Item Location: Orlando, Florida USA

40
(10) Mydata 8-4.7mm Agilis Feeder Inserts
PN: L-014-1319 Item Location: Orlando, Florida USA

45
(3) Mydata 8-4.7mm Agilis Feeder Inserts
PN: L-014-1319 Item Location: Orlando, Florida USA

60
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

50
(6) Mydata 8-5.4mm Agilis Feeder Inserts
Features: PN: L-014-1321 Item Location: Orlando, Florida USA

55
(5) Mydata 8-5.4mm Agilis Feeder Inserts
Features: PN: L-014-1321 Item Location: Orlando, Florida USA

65
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

70
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

75
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

80
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

85
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

90
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

95
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

105
(4) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

110
(5) Mydata 8-3.7mm Agilis Feeder Inserts
PN: L-014-1395 Item Location: Orlando, Florida USA

115
(5) Mydata 8-3.7mm Agilis Feeder Inserts
PN: L-014-1395 Item Location: Orlando, Florida USA

120
(5) Mydata 8-3.7mm Agilis Feeder Inserts
PN: L-014-1395 Item Location: Orlando, Florida USA

125
(5) Mydata 8-3.7mm Agilis Feeder Inserts
PN: L-014-1395 Item Location: Orlando, Florida USA

130
(5) Mydata 8-3.7mm Agilis Feeder Inserts
PN: L-014-1395 Item Location: Orlando, Florida USA

135
(5) Mydata 8-3.7mm Agilis Feeder Inserts
PN: L-014-1395 Item Location: Orlando, Florida USA

150
(3) Mydata 8-3.7mm Agilis Feeder Inserts
PN: L-014-1395 Item Location: Orlando, Florida USA

155
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

140
(5) Mydata 8-3.7mm Agilis Feeder Inserts
Features: PN: L-014-1395 Item Location: Orlando, Florida USA

160
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

145
(5) Mydata 8-3.7mm Agilis Feeder Inserts
Features: PN: L-014-1395 Item Location: Orlando, Florida USA

165
(6) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

170
(5) Mydata 8-3.7mm Agilis Feeder Inserts
PN: L-014-1395 Item Location: Orlando, Florida USA

175
(5) Mydata 8-3.7mm Agilis Feeder Inserts
PN: L-014-1395 Item Location: Orlando, Florida USA

185
Mydata LM8 Agilis Feeder Magazine
PN: L-014-1561 Item Location: Orlando, Florida USA

190
Mydata LM8 Agilis Feeder Magazine
PN: L-014-1561 Item Location: Orlando, Florida USA

205
Mydata M8 Agilis Feeder Magazine
PN: L-014-1471 Item Location: Orlando, Florida USA

210
Mydata M8 Agilis Feeder Magazine
PN: L-014-1471 Item Location: Orlando, Florida USA

180
(6) Mydata 8-3.7mm Agilis Feeder Inserts
Features: PN: L-014-1395 Item Location: Orlando, Florida USA

215
Mydata M8 Agilis Feeder Magazine
PN: L-014-1471 Item Location: Orlando, Florida USA

220
Mydata M8 Agilis Feeder Magazine
PN: L-014-1471 Item Location: Orlando, Florida USA

225
Mydata M8 Agilis Feeder Magazine
PN: L-014-1471 Item Location: Orlando, Florida USA

195
Mydata LM8 Agilis Feeder Magazine
Features: PN: L-014-1561 Item Location: Orlando, Florida USA

230
Mydata M8 Agilis Feeder Magazine
PN: L-014-1471 Item Location: Orlando, Florida USA

200
Mydata LM8 Agilis Feeder Magazine
Features: PN: L-014-1561 Item Location: Orlando, Florida USA

235
Mydata M8 Agilis Feeder Magazine
PN: L-014-1471 Item Location: Orlando, Florida USA

240
Mydata M8 Agilis Feeder Magazine
PN: L-014-1471 Item Location: Orlando, Florida USA

245
(2) Mydata TM16C Feeder Magazine
Item Location: Orlando, Florida USA

250
(3) Mydata TM1216C Feeder Magazine
Item Location: Orlando, Florida USA

255
(3) Mydata TM24D Feeder Magazine
Item Location: Orlando, Florida USA

260
(2) Mydata TM32D Feeder Magazine
Item Location: Orlando, Florida USA

265
(2) Mydata TM8C Feeder Magazine
Item Location: Orlando, Florida USA

270
(2) Mydata TM12C Feeder Magazine
Item Location: Orlando, Florida USA

275
(3) Mydata VMF30 Feeder Magazine
Item Location: Orlando, Florida USA

315
2006 VJ Electronix SRT-1948 BGA Rework System
Includes assortment of nozzles as pictured Max. Board Size 18" X 22" (455mm X 560mm) Min. Component Size 0.100" (2.5mm) Placement 0.002" (50µ) mean + 3s Compliance CE mark Top Heater 1.6kW Focused Convection Bottom Heater 4.0kW Convection Plenum Se...

320
Metcal APR-5000-XLS BGA Rework Machine
Large boards up to 24.5" x 24.5" (622mm x 622mm) to components down to 0.020" x 0.010" (0.5mm x 0.25mm). The flexible APR-5000-XLS System incorporates dual stage pre-heaters and has the thermal capacity and control to execute precise profiles of both...

335
Mitutoyo PH-A14 Optical Comparator
Serial: 504024 Item Location: Orlando, Florida USA

340
2005 ASM AB559A-06 Rotary Head Wedge Bonder
Serial: 59A-18-461 Item Location: Orlando, Florida USA

345
2010 JFP Microtechnic PP5 Die Bonder
Serial: 10-222 Item Location: Orlando, Florida USA

350
2001 F&K Delvotec 6200 Wire Bonder
Serial: _03826 Item Location: Orlando, Florida USA

355
1997 Camelot 1414 Liquid Dispensing System
Serial: 1414 2409 Item Location: Orlando, Florida USA

365
PVA PVA650 Selective Coating Dispensing System
*** WATCH VIDEO *** Serial: W2730 Item Location: Orlando, Florida USA

360
1997 Camelot 1414 Liquid Dispensing System
Serial: 1414 2410 Item Location: Orlando, Florida USA

370
Yestech YTV-F1 Inline AOI
"Parts Machine" Serial: V30608478 Item Location: Orlando, Florida USA

375
2014 Iljin ACC-80LE Conveyor
Serial: IJ01214-3024 Item Location: Orlando, Florida USA

380
2000 Mydata Tex Tray Tower
Serial: 122 Item Location: Orlando, Florida USA

385
2007 Mydata Tex Tray Tower
Serial: 382 Item Location: Orlando, Florida USA

390
2001 Vitronics XPM820 Reflow Oven
Left to Right Edge Rails Mesh Belt Serial: XA80805 Item Location: Orlando, Florida USA

395
Genrad 2286i In-Circuit Tester
1 - Controller, 1- MTG, 1 - HSC, 1 - CST20 1 - DS Reference, 1 - ICA, 20 - Combo 1 1 - DSM, 1 - AFTM, 6 - DUT P/S Features: Windows XP S/W: 5.8 Item Location: Tampa, Florida USA

400
JPW Design & Mfg Industrial Oven
Serial: _000751.01 Item Location: Orlando, Florida USA

415
Nordson Yestech YTV-F1 AOI
Serial: V30608479 Features: Software - 2.7 6 - Cameras Standard Lighting System Item Location: Orlando, Florida USA

405
Nordson Asymtek CW-306 UV Curing System
Serial: 775203B Item Location: Orlando, Florida USA

410
2013 Thermotron SE-300-10-10 Environmental Chamber
Dual 10HP Cascade Refrigeration Thermotron 8800 Controller Exceeds 10C Ramp Rate Per Minute Interior Dimensions : 24 x 26.25 x 28 inches Weight : 1500 pounds Exterior Dimensions : 35 x 70 x 78 inches Serial: 44700 Item Location: Orlando, Florida US...

420
2005 Dek Horizon 02i Screen Printer
Windows XP O/S Instinctiv Software Blue Underscreen Cleaner Adjustable Screen Mount Green Camera Serial: 285944 Item Location: Orlando, Florida USA

425
Nordson Yestech YTV-2050 AOI
Software - 2.7 1 - Top Down Camera 1 - High Mag Camera Item Location: Orlando, Florida USA

500
Agilent 3070 Series 3 In-Circuit Tester
1-B180L Controller 4- ASRU C Cards 4-Control XT Cards 36-Hybrid Double Density Cards 4-6624 DUT Power Supplies 1-External Power Bay 1-PVF "Pin Verification Fixture" Item Location: Tampa, Florida USA

430
2006 Dek Horizon 02i Screen Printer
Windows XP O/S Instinctiv Software Vortex Underscreen Cleaner with Vacuum Adjustable Screen Mount [Allows 20-29" Stencils without adapter] Squeegee Pressure Transducer 620mm Long Board Option Automatic Fiducial Setup Serial: 290264 Item Location: Orl...

435
2007 Dek Horizon 03i Screen Printer
Windows XP O/S Instinctiv Software Blue Underscreen Cleaner with Vacuum 520mm Long Board Clamping System 620mm Long Board Option Automatic Fiducial Setup Serial: 292767 Item Location: Orlando, Florida USA

450
2011 Heller 1809MKIII Reflow Oven
9 Heating Zones 2 Cooling Zones Edge Rails Mesh Belt Edge Oilers 31K Hours Item Location: Orlando, Florida USA

550
2004 Vitronics XPM2-1240 Reflow Oven
Left to Right Edge Rails Serial: X1N120009 Item Location: Orlando, Florida USA

560
2011 Orbotech Symbion S36 AOI
"Parts Machine" Serial: FL114001 Item Location: Orlando, Florida USA

585
2010 Universal 4990E Genesis SMT Pick & Place
*** WATCH VIDEOS *** Windows XP SW: 8.5.5.1 Lightning Feature Cameras: OTHC (Narrow fov) beam 1 firewire 1394 .55 per pixel. OTHC (Narrow fov) beam 2 firewire 1394 .55 per pixel. Pecs: pec beam1 firewire 1394 1.0 mil per pixel. pec beam 2 firewire 13...

645
2011 Orbotech Symbion S36 AOI
Serial: FL113009 Item Location: Orlando, Florida USA

665
2008 Agilent 5DX Series 5000 X-Ray
Windows XP SW: 8.5 Serial: SG42711098 Item Location: Orlando, Florida USA

670
2005 Vitronics 6748 Selective Soldering System
Serial: _0509783301 Item Location: Orlando, Florida USA

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
May 11-14 2020 Online Auction
 Online Only Auction
Auction Date(s)
Bidding Starts: Monday May 11
Bidding Ends: Thursday May 14
Auction Location

Orlando, FL 32750
Company
BAJA Bid LLC

Website: bajabid.com

Listing Terms and Conditions
Acceptance of the Terms of Use Welcome to the website of BAJA BID, LLC ("Company", "we" or "us"). The following terms and conditions ("Terms of Use") govern your access to and use of www.bajabid.com (the "Website") and the auction platform offered thereon. Please read the Terms of Use carefully before you start to use the Website. By completing your registration with the Website you accept and agree to be bound and abide by these Terms of Use. This Website is offered and available to users who are 18 years of age or older. By using this Website, you represent and warrant that you are of legal age to form a binding contract with the Company and meet all of the foregoing eligibility requirements. If you do not meet all of these requirements, you must not access or use the Website. Changes to the Terms of Use We may revise and update these Terms of Use from time to time in our sole discretion. All changes are effective immediately when we post them, and apply to all access to and use of the Website thereafter. Your continued use of the Website following the posting of revised Terms of Use means that you accept and agree to the changes. You are expected to check this page each time you access this Website so you are aware of any changes, as they are binding on you. Reliance on Information Posted; Products The information presented on or through the Website is made available by third-party sellers for information purposes. We do not warrant the accuracy, completeness or usefulness of this information. Any reliance you place on such information is strictly at your own risk. We disclaim all liability and responsibility arising from any reliance placed on such materials by you or any other visitor to the Website, or by anyone who may be informed of any of its contents. All products offered for sale and/or auction through the Website ("products") is made available by third-party sellers ("sellers") on an "AS IS" basis without any representations or warranties by us or the seller and no statement anywhere, whether oral or written, whether made on the Website or elsewhere, shall be deemed such a warranty, representation or assumption of liability. We make no representation and warranties, express or implied, as to whether the purchaser acquires any copyrights, trademarks or other intellectual property. You should inspect each product before bidding to determine the condition, and confirm the specifications, of such product. Withdrawal. We reserve the right to withdraw any product before the sale and shall have no liability whatsoever for such withdrawal. Bidding You must honor all successful bids placed in any auction. In the event you complete a successful bid, you will be obligated to pay the full amount of the successful bid and shall complete the transaction with the Company or the respective seller. A "successful bid" is defined as the highest bid in a regular auction (one with no reserve price) or the highest bid in a reserve auction that meets or exceeds the reserve price. By bidding in an auction you agree to honor all listed terms of sale including, but not limited to, method of payment, appropriate state sales tax, and shipping and handling fees. You are required to provide accurate and complete personal information on your registration and you hereby further agree that whether you are acting as a principal, an agent, or an officer or director of a corporation, or otherwise in any capacity whatsoever, you are personally liable for the payment of the purchase price, buyer's premium and taxes payable with respect to any product auction which you are the successful bidder By bidding on a product you represent and warrant that any bids placed by you are not the product of any collusive or other anti-competitive agreement and are otherwise consistent with federal and state antitrust law. We reserve the right to reject any bid, in our sole discretion. Final Sale All purchases through the Website or as a result of visits made by you are governed by these Terms of Use. ALL PURCHASES MUST BE PAID IN FULL WITHIN 48 HOURS OF RECEIPT OF INVOICE. Invoices will be e-mailed within 24 hours of auction closing. All sales are subject to sales tax, unless buyer provides Company with a valid tax exempt form. Payment shall be made by cash, electronic funds transfer, cashiers check or a personal or company check accompanied by a bank letter of credit. Title to a product will not pass until we receive full payment in the form described above. In addition to other remedies available to us by law, in the event payment is not made in full within 48 hours of receipt of invoice, we reserve the right (i) to impose interest on the amount due from the date of sale equal to 18% percent per annum, or the highest rate permissible by law, whichever shall be less, and/or (ii) treat the purchased product as property of the bidder and hold possession and/or resell such product without notice and use the sale proceeds therefrom to recover any loss or cost incurred due to bidder's failure to pay. Rigging/Removal of a sold product is the sole responsibility of the buyer and must be completed by the posted date. Rigging/Removal may not begin until payment has been made in full and the auction sale is complete. Recommendation or approval of Riggers by Company, by any employee or agent of Company, or by any affiliated entity of Company shall be done only as an accommodation to the buyer. Such recommendation or approval shall not cause Company to be liable in any way for any act or omission of any such Rigger. Selection of a Rigger is solely within the discretion of the buyer, and the buyer acknowledges and agrees that it shall have no rights or remedies against Company, any employee or agent of Company or any affiliate of Company based upon any act or omission by a Rigger. Geographic Restrictions The owner of the Website is based in the state of Florida in the United States. We provide this Website for use only by persons located in the United States. We make no claims that the Website or any of its content is accessible or appropriate outside of the United States. Access to the Website may not be legal by certain persons or in certain countries. If you access the Website from outside the United States, you do so on your own initiative and are responsible for compliance with local laws. Disclaimer of Warranties For the avoidance of doubt, COMPANY MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO ANY PRODUCT, INCLUDING ANY (a) WARRANTY OF MERCHANTABILITY; (b) WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE; (c) WARRANTY OF TITLE; OR (d) WARRANTY AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OF A THIRD PARTY; WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. You understand that we cannot and do not guarantee or warrant that files available for downloading from the internet or the Website will be free of viruses or other destructive code. You are responsible for implementing sufficient procedures and checkpoints to satisfy your particular requirements for anti-virus protection and accuracy of data input and output, and for maintaining a means external to our site for any reconstruction of any lost data. WE WILL NOT BE LIABLE FOR ANY LOSS OR DAMAGE CAUSED BY A DISTRIBUTED DENIAL-OF-SERVICE ATTACK, VIRUSES OR OTHER TECHNOLOGICALLY HARMFUL MATERIAL THAT MAY INFECT YOUR COMPUTER EQUIPMENT, COMPUTER PROGRAMS, DATA OR OTHER PROPRIETARY MATERIAL DUE TO YOUR USE OF THE WEBSITE OR ANY SERVICES OR ITEMS OBTAINED THROUGH THE WEBSITE OR TO YOUR DOWNLOADING OF ANY MATERIAL POSTED ON IT, OR ON ANY WEBSITE LINKED TO IT. YOUR USE OF THE WEBSITE, ITS CONTENT AND ANY SERVICES OR ITEMS OBTAINED THROUGH THE WEBSITE IS AT YOUR OWN RISK. THE WEBSITE, ITS CONTENT AND ANY SERVICES OR ITEMS OBTAINED THROUGH THE WEBSITE ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS, WITHOUT ANY WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED. NEITHER THE COMPANY NOR ANY PERSON ASSOCIATED WITH THE COMPANY MAKES ANY WARRANTY OR REPRESENTATION WITH RESPECT TO THE COMPLETENESS, SECURITY, RELIABILITY, QUALITY, ACCURACY OR AVAILABILITY OF THE WEBSITE. WITHOUT LIMITING THE FOREGOING, NEITHER THE COMPANY NOR ANYONE ASSOCIATED WITH THE COMPANY REPRESENTS OR WARRANTS THAT THE WEBSITE, ITS CONTENT OR ANY SERVICES OR ITEMS OBTAINED THROUGH THE WEBSITE WILL BE ACCURATE, RELIABLE, ERROR-FREE OR UNINTERRUPTED, THAT DEFECTS WILL BE CORRECTED, THAT OUR SITE OR THE SERVER THAT MAKES IT AVAILABLE ARE FREE OF VIRUSES OR OTHER HARMFUL COMPONENTS OR THAT THE WEBSITE OR ANY SERVICES OR ITEMS OBTAINED THROUGH THE WEBSITE WILL OTHERWISE MEET YOUR NEEDS OR EXPECTATIONS. THE COMPANY HEREBY DISCLAIMS ALL WARRANTIES OF ANY KIND, WHETHER EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT AND FITNESS FOR PARTICULAR PURPOSE. THE FOREGOING DOES NOT AFFECT ANY WARRANTIES WHICH CANNOT BE EXCLUDED OR LIMITED UNDER APPLICABLE LAW. Limitation on Liability IN NO EVENT WILL THE COMPANY, ITS AFFILIATES OR THEIR LICENSORS, SERVICE PROVIDERS, EMPLOYEES, AGENTS, OFFICERS OR DIRECTORS BE LIABLE FOR DAMAGES OF ANY KIND, UNDER ANY LEGAL THEORY, ARISING OUT OF OR IN CONNECTION WITH YOUR USE, OR INABILITY TO USE, THE WEBSITE, ANY WEBSITES LINKED TO IT, ANY CONTENT ON THE WEBSITE OR SUCH OTHER WEBSITES OR ANY PRODUCT OBTAINED THROUGH THE WEBSITE OR SUCH OTHER WEBSITES, INCLUDING ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, INCLUDING BUT NOT LIMITED TO, PERSONAL INJURY, PAIN AND SUFFERING, EMOTIONAL DISTRESS, LOSS OF REVENUE, LOSS OF PROFITS, LOSS OF BUSINESS OR ANTICIPATED SAVINGS, LOSS OF USE, LOSS OF GOODWILL, LOSS OF DATA, AND WHETHER CAUSED BY TORT (INCLUDING NEGLIGENCE), BREACH OF CONTRACT OR OTHERWISE, EVEN IF FORESEEABLE. THE FOREGOING DOES NOT AFFECT ANY LIABILITY WHICH CANNOT BE EXCLUDED OR LIMITED UNDER APPLICABLE LAW. Indemnification You agree to defend, indemnify and hold harmless the Company, its affiliates, licensors and service providers, and its and their respective officers, directors, employees, contractors, agents, licensors, suppliers, successors and assigns from and against any claims, liabilities, damages, judgments, awards, losses, costs, expenses or fees (including reasonable attorneys' fees) arising out of or relating to your violation of these Terms of Use or your use of the Website, including, but not limited to, any bid on, or purchase of, a Product. Governing Law and Jurisdiction All matters relating to the Website and these Terms of Use and any dispute or claim arising therefrom or related thereto (in each case, including non-contractual disputes or claims), shall be governed by and construed in accordance with the internal laws of the State of Florida without giving effect to any choice or conflict of law provision or rule (whether of the State of Florida or any other jurisdiction). Any legal suit, action or proceeding arising out of, or related to, these Terms of Use or the Website shall be instituted exclusively in the federal courts of the United States or the courts of the State of Florida, although we retain the right to bring any suit, action or proceeding against you for breach of these Terms of Use in your country of residence or any other relevant country. You waive any and all objections to the exercise of jurisdiction over you by such courts and to venue in such courts. Limitation on Time to File Claims ANY CAUSE OF ACTION OR CLAIM YOU MAY HAVE ARISING OUT OF OR RELATING TO THESE TERMS OF USE OR THE WEBSITE MUST BE COMMENCED WITHIN ONE (1) YEAR AFTER THE CAUSE OF ACTION ACCRUES, OTHERWISE, SUCH CAUSE OF ACTION OR CLAIM IS PERMANENTLY BARRED. Waiver and Severability No waiver of by the Company of any term or condition set forth in these Terms of Use shall be deemed a further or continuing waiver of such term or condition or a waiver of any other term or condition, and any failure of the Company to assert a right or provision under these Terms of Use shall not constitute a waiver of such right or provision. If any provision of these Terms of Use is held by a court or other tribunal of competent jurisdiction to be invalid, illegal or unenforceable for any reason, such provision shall be eliminated or limited to the minimum extent such that the remaining provisions of the Terms of Use will continue in full force and effect. Entire Agreement The Terms of Use constitute the sole and entire agreement between you and Company with respect to the Website and supersede all prior and contemporaneous understandings, agreements, representations and warranties, both written and oral, with respect to the Website.
BAJA Bid welcomes you to our Online Internet Auction! We specialize in the equipment specifically utilized in the electronics manufacturing and assembly industry. Bidders may be invited to preview and inspect all of the equipment prior to the beginning of the auction. All on-site preview / inspection visits must be scheduled in advance and completed during normal business hours (9 am - 3 pm) during the preview period. The removal of all equipment must be completed before the deadline date. A 18% Buyer's Premium will be added to the final sale price and included on the corresponding invoice. All appropriate sales taxes will be included in the total price unless the required tax exempt documentation is provided by the buyer. All winning bidders will be contacted after the completion of the auction. An invoice will be provided detailing the items that were purchased and the payment is due at that time. This entire payment must be received within 2 business days after receipt of the corresponding invoice. The preferred payment methods are cash, certified check or bank wire transfer. American Express, Visa or MasterCard credit cards may be accepted depending on the final sale price and specific conditions. The payment must be paid in US dollars. The sellers have the right to set reserve prices and/or purchase their own equipment.

1

1
2001 Mydata MY15 SMT Pick & Place
Serial: 15108 Features: S/W: 2.4.6b Electrical Two-Pole Test Electrical Transistor Test Optical Centering Hydra Linescan Item Location: Orlando, Florida USA

2
2001 Mydata MY15 SMT Pick & Place
Serial: 15111 Features: Electrical Two-Pole Test Electrical Transistor Test Optical Centering Hydra Linescan Item Location: Orlando, Florida USA

3
Electro-Design EP710W508 Conveyor
Item Location: Orlando, Florida USA

5
(10) Mydata 8-4.7mm Agilis Feeder Inserts
PN: L-014-1319 Item Location: Orlando, Florida USA

10
(10) Mydata 8-4.7mm Agilis Feeder Inserts
PN: L-014-1319 Item Location: Orlando, Florida USA

15
(10) Mydata 8-4.7mm Agilis Feeder Inserts
PN: L-014-1319 Item Location: Orlando, Florida USA

20
(10) Mydata 8-4.7mm Agilis Feeder Inserts
PN: L-014-1319 Item Location: Orlando, Florida USA

25
(10) Mydata 8-4.7mm Agilis Feeder Inserts
PN: L-014-1319 Item Location: Orlando, Florida USA

30
(10) Mydata 8-4.7mm Agilis Feeder Inserts
PN: L-014-1319 Item Location: Orlando, Florida USA

35
(10) Mydata 8-4.7mm Agilis Feeder Inserts
PN: L-014-1319 Item Location: Orlando, Florida USA

40
(10) Mydata 8-4.7mm Agilis Feeder Inserts
PN: L-014-1319 Item Location: Orlando, Florida USA

45
(3) Mydata 8-4.7mm Agilis Feeder Inserts
PN: L-014-1319 Item Location: Orlando, Florida USA

60
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

50
(6) Mydata 8-5.4mm Agilis Feeder Inserts
Features: PN: L-014-1321 Item Location: Orlando, Florida USA

55
(5) Mydata 8-5.4mm Agilis Feeder Inserts
Features: PN: L-014-1321 Item Location: Orlando, Florida USA

65
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

70
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

75
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

80
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

85
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

90
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

95
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

105
(4) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

110
(5) Mydata 8-3.7mm Agilis Feeder Inserts
PN: L-014-1395 Item Location: Orlando, Florida USA

115
(5) Mydata 8-3.7mm Agilis Feeder Inserts
PN: L-014-1395 Item Location: Orlando, Florida USA

120
(5) Mydata 8-3.7mm Agilis Feeder Inserts
PN: L-014-1395 Item Location: Orlando, Florida USA

125
(5) Mydata 8-3.7mm Agilis Feeder Inserts
PN: L-014-1395 Item Location: Orlando, Florida USA

130
(5) Mydata 8-3.7mm Agilis Feeder Inserts
PN: L-014-1395 Item Location: Orlando, Florida USA

135
(5) Mydata 8-3.7mm Agilis Feeder Inserts
PN: L-014-1395 Item Location: Orlando, Florida USA

150
(3) Mydata 8-3.7mm Agilis Feeder Inserts
PN: L-014-1395 Item Location: Orlando, Florida USA

155
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

140
(5) Mydata 8-3.7mm Agilis Feeder Inserts
Features: PN: L-014-1395 Item Location: Orlando, Florida USA

160
(5) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

145
(5) Mydata 8-3.7mm Agilis Feeder Inserts
Features: PN: L-014-1395 Item Location: Orlando, Florida USA

165
(6) Mydata 8-4.0mm Agilis Feeder Inserts
PN: L-014-1320 Item Location: Orlando, Florida USA

170
(5) Mydata 8-3.7mm Agilis Feeder Inserts
PN: L-014-1395 Item Location: Orlando, Florida USA

175
(5) Mydata 8-3.7mm Agilis Feeder Inserts
PN: L-014-1395 Item Location: Orlando, Florida USA

185
Mydata LM8 Agilis Feeder Magazine
PN: L-014-1561 Item Location: Orlando, Florida USA

190
Mydata LM8 Agilis Feeder Magazine
PN: L-014-1561 Item Location: Orlando, Florida USA

205
Mydata M8 Agilis Feeder Magazine
PN: L-014-1471 Item Location: Orlando, Florida USA

210
Mydata M8 Agilis Feeder Magazine
PN: L-014-1471 Item Location: Orlando, Florida USA

180
(6) Mydata 8-3.7mm Agilis Feeder Inserts
Features: PN: L-014-1395 Item Location: Orlando, Florida USA

215
Mydata M8 Agilis Feeder Magazine
PN: L-014-1471 Item Location: Orlando, Florida USA

220
Mydata M8 Agilis Feeder Magazine
PN: L-014-1471 Item Location: Orlando, Florida USA

225
Mydata M8 Agilis Feeder Magazine
PN: L-014-1471 Item Location: Orlando, Florida USA

195
Mydata LM8 Agilis Feeder Magazine
Features: PN: L-014-1561 Item Location: Orlando, Florida USA

230
Mydata M8 Agilis Feeder Magazine
PN: L-014-1471 Item Location: Orlando, Florida USA

200
Mydata LM8 Agilis Feeder Magazine
Features: PN: L-014-1561 Item Location: Orlando, Florida USA

235
Mydata M8 Agilis Feeder Magazine
PN: L-014-1471 Item Location: Orlando, Florida USA

240
Mydata M8 Agilis Feeder Magazine
PN: L-014-1471 Item Location: Orlando, Florida USA

245
(2) Mydata TM16C Feeder Magazine
Item Location: Orlando, Florida USA

250
(3) Mydata TM1216C Feeder Magazine
Item Location: Orlando, Florida USA

255
(3) Mydata TM24D Feeder Magazine
Item Location: Orlando, Florida USA

260
(2) Mydata TM32D Feeder Magazine
Item Location: Orlando, Florida USA

265
(2) Mydata TM8C Feeder Magazine
Item Location: Orlando, Florida USA

270
(2) Mydata TM12C Feeder Magazine
Item Location: Orlando, Florida USA

275
(3) Mydata VMF30 Feeder Magazine
Item Location: Orlando, Florida USA

315
2006 VJ Electronix SRT-1948 BGA Rework System
Includes assortment of nozzles as pictured Max. Board Size 18" X 22" (455mm X 560mm) Min. Component Size 0.100" (2.5mm) Placement 0.002" (50µ) mean + 3s Compliance CE mark Top Heater 1.6kW Focused Convection Bottom Heater 4.0kW Convection Plenum Se...

320
Metcal APR-5000-XLS BGA Rework Machine
Large boards up to 24.5" x 24.5" (622mm x 622mm) to components down to 0.020" x 0.010" (0.5mm x 0.25mm). The flexible APR-5000-XLS System incorporates dual stage pre-heaters and has the thermal capacity and control to execute precise profiles of both...

335
Mitutoyo PH-A14 Optical Comparator
Serial: 504024 Item Location: Orlando, Florida USA

340
2005 ASM AB559A-06 Rotary Head Wedge Bonder
Serial: 59A-18-461 Item Location: Orlando, Florida USA

345
2010 JFP Microtechnic PP5 Die Bonder
Serial: 10-222 Item Location: Orlando, Florida USA

350
2001 F&K Delvotec 6200 Wire Bonder
Serial: _03826 Item Location: Orlando, Florida USA

355
1997 Camelot 1414 Liquid Dispensing System
Serial: 1414 2409 Item Location: Orlando, Florida USA

365
PVA PVA650 Selective Coating Dispensing System
*** WATCH VIDEO *** Serial: W2730 Item Location: Orlando, Florida USA

360
1997 Camelot 1414 Liquid Dispensing System
Serial: 1414 2410 Item Location: Orlando, Florida USA

370
Yestech YTV-F1 Inline AOI
"Parts Machine" Serial: V30608478 Item Location: Orlando, Florida USA

375
2014 Iljin ACC-80LE Conveyor
Serial: IJ01214-3024 Item Location: Orlando, Florida USA

380
2000 Mydata Tex Tray Tower
Serial: 122 Item Location: Orlando, Florida USA

385
2007 Mydata Tex Tray Tower
Serial: 382 Item Location: Orlando, Florida USA

390
2001 Vitronics XPM820 Reflow Oven
Left to Right Edge Rails Mesh Belt Serial: XA80805 Item Location: Orlando, Florida USA

395
Genrad 2286i In-Circuit Tester
1 - Controller, 1- MTG, 1 - HSC, 1 - CST20 1 - DS Reference, 1 - ICA, 20 - Combo 1 1 - DSM, 1 - AFTM, 6 - DUT P/S Features: Windows XP S/W: 5.8 Item Location: Tampa, Florida USA

400
JPW Design & Mfg Industrial Oven
Serial: _000751.01 Item Location: Orlando, Florida USA

415
Nordson Yestech YTV-F1 AOI
Serial: V30608479 Features: Software - 2.7 6 - Cameras Standard Lighting System Item Location: Orlando, Florida USA

405
Nordson Asymtek CW-306 UV Curing System
Serial: 775203B Item Location: Orlando, Florida USA

410
2013 Thermotron SE-300-10-10 Environmental Chamber
Dual 10HP Cascade Refrigeration Thermotron 8800 Controller Exceeds 10C Ramp Rate Per Minute Interior Dimensions : 24 x 26.25 x 28 inches Weight : 1500 pounds Exterior Dimensions : 35 x 70 x 78 inches Serial: 44700 Item Location: Orlando, Florida US...

420
2005 Dek Horizon 02i Screen Printer
Windows XP O/S Instinctiv Software Blue Underscreen Cleaner Adjustable Screen Mount Green Camera Serial: 285944 Item Location: Orlando, Florida USA

425
Nordson Yestech YTV-2050 AOI
Software - 2.7 1 - Top Down Camera 1 - High Mag Camera Item Location: Orlando, Florida USA

500
Agilent 3070 Series 3 In-Circuit Tester
1-B180L Controller 4- ASRU C Cards 4-Control XT Cards 36-Hybrid Double Density Cards 4-6624 DUT Power Supplies 1-External Power Bay 1-PVF "Pin Verification Fixture" Item Location: Tampa, Florida USA

430
2006 Dek Horizon 02i Screen Printer
Windows XP O/S Instinctiv Software Vortex Underscreen Cleaner with Vacuum Adjustable Screen Mount [Allows 20-29" Stencils without adapter] Squeegee Pressure Transducer 620mm Long Board Option Automatic Fiducial Setup Serial: 290264 Item Location: Orl...

435
2007 Dek Horizon 03i Screen Printer
Windows XP O/S Instinctiv Software Blue Underscreen Cleaner with Vacuum 520mm Long Board Clamping System 620mm Long Board Option Automatic Fiducial Setup Serial: 292767 Item Location: Orlando, Florida USA

450
2011 Heller 1809MKIII Reflow Oven
9 Heating Zones 2 Cooling Zones Edge Rails Mesh Belt Edge Oilers 31K Hours Item Location: Orlando, Florida USA

550
2004 Vitronics XPM2-1240 Reflow Oven
Left to Right Edge Rails Serial: X1N120009 Item Location: Orlando, Florida USA

560
2011 Orbotech Symbion S36 AOI
"Parts Machine" Serial: FL114001 Item Location: Orlando, Florida USA

585
2010 Universal 4990E Genesis SMT Pick & Place
*** WATCH VIDEOS *** Windows XP SW: 8.5.5.1 Lightning Feature Cameras: OTHC (Narrow fov) beam 1 firewire 1394 .55 per pixel. OTHC (Narrow fov) beam 2 firewire 1394 .55 per pixel. Pecs: pec beam1 firewire 1394 1.0 mil per pixel. pec beam 2 firewire 13...

645
2011 Orbotech Symbion S36 AOI
Serial: FL113009 Item Location: Orlando, Florida USA

665
2008 Agilent 5DX Series 5000 X-Ray
Windows XP SW: 8.5 Serial: SG42711098 Item Location: Orlando, Florida USA

670
2005 Vitronics 6748 Selective Soldering System
Serial: _0509783301 Item Location: Orlando, Florida USA