Online Auction

ADVANCED CMM INC.

Assets no longer needed in Continuing Operations

ASSETS LOCATED IN WIXOM, MICHIGAN

AUCTION STARTS: FRI // OCT.27.2023

LOTS BEGIN ENDING: TUES // OCT.31.2023 @ 11:00 AM EST

PREVIEW: MON // OCT.30.2023 @ 9:00 AM - 5:00 PM EST

DEA Scirocco 251310 bridge style CMM

Running Video

One owner.  Machine only used for contract measurement, has been at one location in a climate controlled laboratory in a non-manufacturing facility, is fully functional, in like-new condition and is currently in use.  Machine has been very well maintained with calibrations conducted on an annual basis.  All calibrations were within OEM specified accuracies and purchase of machine includes a full history of all calibration certificates/documentation.  Original configuration (wiring) accommodated TP2, TP6, TP6A and TP20 probes.  Machine was upgraded with new wiring, controller circuit board and PI7c probe controller to enable the use of a TP7 probe in addition to all the previous probe types.  Machine has a Tutor-P controller with a TU01 portable joystick control.

Includes:

Renishaw indexable PH10M (autojoint) probe head.

Dell Precision T3600 computer.

PC-DMIS CAD++ software.  License is current and active in perpetuity.  If continued support and updates are desired, SMA (software maintenance agreement) with Hexagon Manufacturing Intelligence will be due in August 2024.

DataPage+ 5.2 (database) software.  License is current and active in perpetuity.

To be sold separately:

Calibration artifacts (calibration spheres), probes, probe modules, probe extensions, probe styli, styli change racks, probe change racks and any other miscellaneous CMM hardware which will be listed in separate lots of this auction.

Specifications:  

Machine weight: 6,700 Kg (14,770 lbs)

Maximum part weight capacity: 5,000 Kg (11,023 lbs)

Measuring volume size (axes stroke): X= 2500 mm (8’ 2”), Y= 1300 mm (4’ 3”), Z= 1000 mm (3’ 3”)

Total volume size: X= 3378 mm (11’ 1”), Y= 1346 mm (4’ 5”), Z= 1194 mm (3’ 11”)

OEM Specified volumetric accuracy: 0.0154 mm (0.00061”)

Most recent calibrated volumetric accuracy: 0.0103 mm (0.00041”)

Most recent calibrated linear accuracy: X= 0.0050 mm (0.00020”), Y= 0.0047 mm (0.00018”), Z= 0.0020 mm (0.00008”)

Most recent calibrated repeatability: X= 0.0009 mm (0.00004”), Y= 0.0005 mm (0.00002”), Z= 0.0004 mm (0.00002”)

OAL machine size: LENGTH=12’ 7” , WIDTH=6’ 0”, HEIGHT=11’ 4

Inspection Equip

Stylus change racks

Probes & Ext.

Styli Kits

Gage Block

Threaded locating plugs

Micrometers

Calibration spheres

2) Renishaw ACRI probe change racks (1 w/ mounting rack controller & cabling)

Rayco modular fixing plates & angles

Precision parallels, cubes & angles

Tru-Stone 107” x 54” x 20-1/2” grey granite surface plate w/ 5/16-18 threaded inserts, w/ stand on leveling jack

70-1/2” X 53-1/2” X 12-1/2” grey granite surface plate w/ 5/16-18 threaded inserts, w/ stand on leveling jack

Hardware

Magnetic indicator stands

Tool boxes (Kennedy), hand tools, magnifier lights, risers, angle plates, inspection tools (Starrett, Bausch & Lomb)

Dial indicators

Height gages

Good selection of Renishaw tooling!

And much more!

Air Compressor

Kaeser SX6 5 HP rotary screw air compressor, w/ KRD025 air dryer & oil separator

Crane

Spanco approx.. 10’8” wide x 10’ high A-frame portable bridge crane w/ Yale 3 ton hoist

Miscellaneous

Conference table w/ 8 chairs, Credenza & matching office/desk furniture, Folding tables, filing cabinets, kitchen, 2 door storage cabinets and more!

Visit www.rjmauctions.com for more information, photos & to bid!