ABSOLUTE AUCTION OF COLLINS TOOL CORP. PA
Listing ID#: 1545810

Auction Location

LEWISTOWN, PA 17044
Auction Dates and TimesSALE IS COMPLETED
Thursday Sep 21, 2023 Completed
Auction Type
 Live Auction with Online Bidding  VIEW ONLINE CATALOG
Company Information
Tri-State Auction & Realty, LLC

Website: tristate-auction.com

GoToAuction.com ID#: 5821
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
WE DO ACCEPT CREDIT OR DEBIT CARDS. PAYMENT IN FULL REQUIRED DAY OF AUCTION UNLESS APPROVED BY AUCTIONEER BEFORE THE AUCTION. NEW BIDDERS BANK LETTER OF GUARANTEE OR REFUNDABLE DEPOSIT OF 25 PERCENT OF MAXIMUM ANTICIPATED BID IS REQUIRED IN ORDER TO BE APPROVED TO BID. FAX LETTER TO 423-201-9441 OR CALL 800.334.4395 OR EMAIL auctions@tristate-auction.com FOR WIRING INSTRUCTIONS. All descriptions are conscientiously described by the Seller and Auction Company, however, neither assume any liability for errors or omissions. Everything is sold "as is where is" with no expressed or implied warranties. No guarantee of merchantability or suitability for intended usage is given or implied. The successful bidder is responsible for their lot from the time the auctioneer calls item sold. Neither the Auction Company nor the Seller assumes responsibility for any loss, damage or theft occurring after the hammer falls. Neither the Auction Company nor the Seller assumes any responsibility for any injuries suffered while inspecting, buying or removing equipment. Jurisdiction and venue regarding any legal dispute arising here from shall be held in (LOCATION). Most states require collection of sales tax on machinery purchases unless buyer can furnish a valid sales and use tax exemption CERTIFICATE from your state. NOTE: Some states do not accept out of state direct pay permits.
Listing Information

ABSOLUTE AUCTION OF

COLLINS TOOL CORP. PA

(personal property & mill equipment)

THURSDAY, SEPT. 21 2023 9:00 AM

3254 OLD STAGE ROAD

LEWISTOWN, PA 17044

PA LIC # AU 006050

CLICK HERE FOR PROXIBID

 INVENTORY

MILL

-MELLOTT MODEL 210 HEAVY DUTY ROSSER HEAD DEBARKER W/ 5’X5’ CONTROL CAB W/ 60HP MOTOR SN#9221019
-PARTS OF MELLOTT DEBARKER
-PRECISION 55’ BARN SWEEP CONVEYOR W/ DRIVE
-PRECISION 30’ 3 STRAND LOG DECK W/ 3 ARM STOP & LOADER W/ HYDRAULIC DRIVE
-L& M BAR TYPE CUT-OFF SAW W/ 7.5 HP MOTOR W/ STOP GATE
-PARTS FOR L & M CUT-OFF SAW
-RECKART 20’ INFEED LOT TROUGH W/ 110 LADDER BACK CHAIN W/ DRIVE
-RECKART 15’ OUTFEED LOT TROUGH W/ 3 ARM KICKERS W/ HYDRAULIC DRIVE
-HMC 30’ 3 STRAND HEAVY DUTY LOG DECK W/ STOP & LOADER W/ HYDRAULIC DRIVE
-MELLOTT 20HP HYDRAULIC POWER PACK (CONTROLS CUT-OFF AREA)
-SINGLE LINE LAZER LITE
-HYDRAULIC CONTROLS
-CLEEREMAN MODEL 36 4 HEAD BLOCK CARRIAGE 18’ LONG W/ SHIFTING HEAD BLOCK W/ AIR ELECTRIC SETWORKS W/ TRACKWAY & PANTAGRAPH W/ CONTROLS
-PARTS FOR CLEEREMAN CARRIAGE
-RECKART 50HP END OF TRACK HYDRAULIC CARRIAGE DRIVE W/ DRUM PACKAGE W/ CONTROLS
-PARTS FOR RECKART CARRIAGE DRIVE
-HMC ALL STEEL HUSK W/ OFF BEARING BELT W/ 4’X4’ CONTROL CAB
-150HP 460 VOLT 1770 RPM MOTOR
-FRONTLINE CHAIN TYPE LOG TURNER
-HMC 20’ 3 STRAND LOG DECK W/ 4 ARM STOP & LOADER W/ HYDRAULIC DRIVE
-MELLOTT 24”X16’ SPIRAL ROLL CASE W/ DRIVE
-HMC 22’ 4 STRAND TRANSFER DECK W/ #78 CHAIN W/ DRIVE
-(2) RECKART 14”X14’ BELT CONVEYOR W/ DRIVE
-RECKART 60”X8’ BELT TRANSFER W/ DRIVE
-RECKART 24” X55’ BELT CONVEYOR W/ 24” X105’ BELT CONVEYOR W/ DRIVE COMING INTO HOG
-HYTROL 8” X16’ BELT CONVEYOR W/ DRIVE
-HYTROL 12”X20’ BELT TRANSFER
-SCMI M3 GAND RIG SAW W/ MOTOR & CONTROLS
-SAWS FOR SCMI GANG SAW & SPACERS
-MONTGOMERY MODEL 42PM HOG W/ TOP FEED BOTTOM DISCHARGE W/ INFEED SHCUTE W/ HYDRAULIC HOOD W/ HYDRAULIC POWER PACK SN#3066
-PARTS FOR MONTGOMERY HOG
-RECKART 80’ BARN SWEEP CONVEYOR W/ DRIVE
-3 LINE LAZER LITE SYSTEM
-8’ ROLLCASE W/ DRIVE
-(2) NEW ORGINAL RADIAL ARM SAW 7.5HP PHASE
-BRUNING & FEDERAL 42” SUCTION BLOWER W/ 25HP MOTOR W/ INCOMING & OUTGOING PIPE
-FRONTLINE 36” SUCTION BLOWER W/ 15HP MOTOR W/ INCOMING & OUTGOING PIPE
-CORNELL 36” BLOWER W/ 15HP MOTOR W/ INCOMING & OUTGOING PIPE
-APPROX 6’ CYCLONE
-APPROX 8’ CYCLONE
-CORNELL 36” BLOWER NOT MOTOR
-SCMI GANG RIP SAW W/ MOTOR & CONTROLS
-FRONTLINE 24” SUCTION BLOWER W/ 15HP MOTOR
-(4) 1HP HANDLE CHIP SAW 3 PHASE
-LOTS OF 56” F STYLE CIRCLE SAW
-(2) SCISSOR LIFT TABLE
-200HP 460 VOLT 1188 RPM MOTOR
-200HP 460 VOLT 1780 RPM MOTOR
-QUINCY 15HP TANK MOUNTED AIR COMPRESSOR
-AIR STORAGE TANK
-AIR HOSE REEL W/ HOSE
-POWER MATIC VERTICAL BAND SAW 3 PHASE
-COUNTY LINE 5’X5’ SELF DUMPING HOPPER
-WRIGHT 40”X5’ SELF DUMPING HOPPER

MISC
-BANDING CART
-NEW BANDING CART FOR METAL BANDING
-RENS HAND HELD METAL DETECTOR
-LOT OF PAINT MARTKERS FOR LUMBER
-(2) LUMBER GRADING STICKS
-TORCH CART W/ HOSES & GUAGES
-MILL 250 AC-DC WELDER
-LOT OF BELT LACER AND LACING
-ELECTRIC PALLET JACK W/ BUILT IN CHARGER & (2) PALLET JACKS
-LOT OF PEDISTIAL FANS
-CLEAN UP TOOLS & LADDERS
-LOG TONG-
-DEWALT SIDE GRINDER
-SHOP VACS
-BARRELS OF CAM 2 PROMAX AW 46 MVI HYDRUALIC OIL
-JOCKEY GRINDER
-ORGAN CHAIN SHARPENER
-42”X8’ STEEL WORK TABLE
-4’X8’ STEEL WORK TABLE W/ VISE
-STEEL WORK TABLE
-LOTS OF MATERIAL CARTS
-DOCK PLATE
-BTEK 4’X4’ PALLET SCALES W/ DIGITAL READ OUT
-PALLET W/ STRETCH WRAP
-DUAL BENCH GRINDER
-BELT SANDER
-BOLT BIN W/ CONTENTS
-CRAFTMAN 15 ½” DRILL PRESS
-18 SPEED DRILL PRESS
-20TON SHOP PRESS
-LOTS OF MISC BELTS
-LOTS OF MATERIAL RACKS
-PICNIC TABLES

ELECTRIC
-SCHNEIDER 150HP SOFTYPE STARTER W/ SQUARE D 200 AMP DISCONNECT
-SCHNEIDER 200HP SOFTYPE STARTER (STARTING THE HOG)
-SQUARE D 400AMP DISCONNECT
-ABB 150HP SOFTYPE STARTER


Auction License: JAMES SAVAGE LIC #5120
Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Other Sales by
This Company

Jul 27
SOUTH PITTSBURG, TN



Sponsored Links

ABSOLUTE AUCTION OF COLLINS TOOL CORP. PA

Tri-State Auction & Realty, LLC

Tri-State Auction & Realty, LLC


Contact:
Phone:
Sale Location
3254 OLD STAGE ROAD 3254 OLD STAGE ROAD
LEWISTOWN, PA 17044
Sale Dates and Times
Thursday Sep 21, 2023 Completed
Sale Terms and Conditions
WE DO ACCEPT CREDIT OR DEBIT CARDS. PAYMENT IN FULL REQUIRED DAY OF AUCTION UNLESS APPROVED BY AUCTIONEER BEFORE THE AUCTION. NEW BIDDERS BANK LETTER OF GUARANTEE OR REFUNDABLE DEPOSIT OF 25 PERCENT OF MAXIMUM ANTICIPATED BID IS REQUIRED IN ORDER TO BE APPROVED TO BID. FAX LETTER TO 423-201-9441 OR CALL 800.334.4395 OR EMAIL auctions@tristate-auction.com FOR WIRING INSTRUCTIONS. All descriptions are conscientiously described by the Seller and Auction Company, however, neither assume any liability for errors or omissions. Everything is sold "as is where is" with no expressed or implied warranties. No guarantee of merchantability or suitability for intended usage is given or implied. The successful bidder is responsible for their lot from the time the auctioneer calls item sold. Neither the Auction Company nor the Seller assumes responsibility for any loss, damage or theft occurring after the hammer falls. Neither the Auction Company nor the Seller assumes any responsibility for any injuries suffered while inspecting, buying or removing equipment. Jurisdiction and venue regarding any legal dispute arising here from shall be held in (LOCATION). Most states require collection of sales tax on machinery purchases unless buyer can furnish a valid sales and use tax exemption CERTIFICATE from your state. NOTE: Some states do not accept out of state direct pay permits.
Listing Details

ABSOLUTE AUCTION OF

COLLINS TOOL CORP. PA

(personal property & mill equipment)

THURSDAY, SEPT. 21 2023 9:00 AM

3254 OLD STAGE ROAD

LEWISTOWN, PA 17044

PA LIC # AU 006050

CLICK HERE FOR PROXIBID

 INVENTORY

MILL

-MELLOTT MODEL 210 HEAVY DUTY ROSSER HEAD DEBARKER W/ 5’X5’ CONTROL CAB W/ 60HP MOTOR SN#9221019
-PARTS OF MELLOTT DEBARKER
-PRECISION 55’ BARN SWEEP CONVEYOR W/ DRIVE
-PRECISION 30’ 3 STRAND LOG DECK W/ 3 ARM STOP & LOADER W/ HYDRAULIC DRIVE
-L& M BAR TYPE CUT-OFF SAW W/ 7.5 HP MOTOR W/ STOP GATE
-PARTS FOR L & M CUT-OFF SAW
-RECKART 20’ INFEED LOT TROUGH W/ 110 LADDER BACK CHAIN W/ DRIVE
-RECKART 15’ OUTFEED LOT TROUGH W/ 3 ARM KICKERS W/ HYDRAULIC DRIVE
-HMC 30’ 3 STRAND HEAVY DUTY LOG DECK W/ STOP & LOADER W/ HYDRAULIC DRIVE
-MELLOTT 20HP HYDRAULIC POWER PACK (CONTROLS CUT-OFF AREA)
-SINGLE LINE LAZER LITE
-HYDRAULIC CONTROLS
-CLEEREMAN MODEL 36 4 HEAD BLOCK CARRIAGE 18’ LONG W/ SHIFTING HEAD BLOCK W/ AIR ELECTRIC SETWORKS W/ TRACKWAY & PANTAGRAPH W/ CONTROLS
-PARTS FOR CLEEREMAN CARRIAGE
-RECKART 50HP END OF TRACK HYDRAULIC CARRIAGE DRIVE W/ DRUM PACKAGE W/ CONTROLS
-PARTS FOR RECKART CARRIAGE DRIVE
-HMC ALL STEEL HUSK W/ OFF BEARING BELT W/ 4’X4’ CONTROL CAB
-150HP 460 VOLT 1770 RPM MOTOR
-FRONTLINE CHAIN TYPE LOG TURNER
-HMC 20’ 3 STRAND LOG DECK W/ 4 ARM STOP & LOADER W/ HYDRAULIC DRIVE
-MELLOTT 24”X16’ SPIRAL ROLL CASE W/ DRIVE
-HMC 22’ 4 STRAND TRANSFER DECK W/ #78 CHAIN W/ DRIVE
-(2) RECKART 14”X14’ BELT CONVEYOR W/ DRIVE
-RECKART 60”X8’ BELT TRANSFER W/ DRIVE
-RECKART 24” X55’ BELT CONVEYOR W/ 24” X105’ BELT CONVEYOR W/ DRIVE COMING INTO HOG
-HYTROL 8” X16’ BELT CONVEYOR W/ DRIVE
-HYTROL 12”X20’ BELT TRANSFER
-SCMI M3 GAND RIG SAW W/ MOTOR & CONTROLS
-SAWS FOR SCMI GANG SAW & SPACERS
-MONTGOMERY MODEL 42PM HOG W/ TOP FEED BOTTOM DISCHARGE W/ INFEED SHCUTE W/ HYDRAULIC HOOD W/ HYDRAULIC POWER PACK SN#3066
-PARTS FOR MONTGOMERY HOG
-RECKART 80’ BARN SWEEP CONVEYOR W/ DRIVE
-3 LINE LAZER LITE SYSTEM
-8’ ROLLCASE W/ DRIVE
-(2) NEW ORGINAL RADIAL ARM SAW 7.5HP PHASE
-BRUNING & FEDERAL 42” SUCTION BLOWER W/ 25HP MOTOR W/ INCOMING & OUTGOING PIPE
-FRONTLINE 36” SUCTION BLOWER W/ 15HP MOTOR W/ INCOMING & OUTGOING PIPE
-CORNELL 36” BLOWER W/ 15HP MOTOR W/ INCOMING & OUTGOING PIPE
-APPROX 6’ CYCLONE
-APPROX 8’ CYCLONE
-CORNELL 36” BLOWER NOT MOTOR
-SCMI GANG RIP SAW W/ MOTOR & CONTROLS
-FRONTLINE 24” SUCTION BLOWER W/ 15HP MOTOR
-(4) 1HP HANDLE CHIP SAW 3 PHASE
-LOTS OF 56” F STYLE CIRCLE SAW
-(2) SCISSOR LIFT TABLE
-200HP 460 VOLT 1188 RPM MOTOR
-200HP 460 VOLT 1780 RPM MOTOR
-QUINCY 15HP TANK MOUNTED AIR COMPRESSOR
-AIR STORAGE TANK
-AIR HOSE REEL W/ HOSE
-POWER MATIC VERTICAL BAND SAW 3 PHASE
-COUNTY LINE 5’X5’ SELF DUMPING HOPPER
-WRIGHT 40”X5’ SELF DUMPING HOPPER

MISC
-BANDING CART
-NEW BANDING CART FOR METAL BANDING
-RENS HAND HELD METAL DETECTOR
-LOT OF PAINT MARTKERS FOR LUMBER
-(2) LUMBER GRADING STICKS
-TORCH CART W/ HOSES & GUAGES
-MILL 250 AC-DC WELDER
-LOT OF BELT LACER AND LACING
-ELECTRIC PALLET JACK W/ BUILT IN CHARGER & (2) PALLET JACKS
-LOT OF PEDISTIAL FANS
-CLEAN UP TOOLS & LADDERS
-LOG TONG-
-DEWALT SIDE GRINDER
-SHOP VACS
-BARRELS OF CAM 2 PROMAX AW 46 MVI HYDRUALIC OIL
-JOCKEY GRINDER
-ORGAN CHAIN SHARPENER
-42”X8’ STEEL WORK TABLE
-4’X8’ STEEL WORK TABLE W/ VISE
-STEEL WORK TABLE
-LOTS OF MATERIAL CARTS
-DOCK PLATE
-BTEK 4’X4’ PALLET SCALES W/ DIGITAL READ OUT
-PALLET W/ STRETCH WRAP
-DUAL BENCH GRINDER
-BELT SANDER
-BOLT BIN W/ CONTENTS
-CRAFTMAN 15 ½” DRILL PRESS
-18 SPEED DRILL PRESS
-20TON SHOP PRESS
-LOTS OF MISC BELTS
-LOTS OF MATERIAL RACKS
-PICNIC TABLES

ELECTRIC
-SCHNEIDER 150HP SOFTYPE STARTER W/ SQUARE D 200 AMP DISCONNECT
-SCHNEIDER 200HP SOFTYPE STARTER (STARTING THE HOG)
-SQUARE D 400AMP DISCONNECT
-ABB 150HP SOFTYPE STARTER

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
ABSOLUTE AUCTION OF COLLINS TOOL CORP. PA
 Live Auction w/Online Bidding
Auction Date(s)
Thursday Sep 21, 2023 Completed
Auction Location

LEWISTOWN, PA 17044
Company
Tri-State Auction & Realty, LLC

Website: tristate-auction.com

Listing Terms and Conditions
WE DO ACCEPT CREDIT OR DEBIT CARDS. PAYMENT IN FULL REQUIRED DAY OF AUCTION UNLESS APPROVED BY AUCTIONEER BEFORE THE AUCTION. NEW BIDDERS BANK LETTER OF GUARANTEE OR REFUNDABLE DEPOSIT OF 25 PERCENT OF MAXIMUM ANTICIPATED BID IS REQUIRED IN ORDER TO BE APPROVED TO BID. FAX LETTER TO 423-201-9441 OR CALL 800.334.4395 OR EMAIL auctions@tristate-auction.com FOR WIRING INSTRUCTIONS. All descriptions are conscientiously described by the Seller and Auction Company, however, neither assume any liability for errors or omissions. Everything is sold "as is where is" with no expressed or implied warranties. No guarantee of merchantability or suitability for intended usage is given or implied. The successful bidder is responsible for their lot from the time the auctioneer calls item sold. Neither the Auction Company nor the Seller assumes responsibility for any loss, damage or theft occurring after the hammer falls. Neither the Auction Company nor the Seller assumes any responsibility for any injuries suffered while inspecting, buying or removing equipment. Jurisdiction and venue regarding any legal dispute arising here from shall be held in (LOCATION). Most states require collection of sales tax on machinery purchases unless buyer can furnish a valid sales and use tax exemption CERTIFICATE from your state. NOTE: Some states do not accept out of state direct pay permits.

ABSOLUTE AUCTION OF

COLLINS TOOL CORP. PA

(personal property & mill equipment)

THURSDAY, SEPT. 21 2023 9:00 AM

3254 OLD STAGE ROAD

LEWISTOWN, PA 17044

PA LIC # AU 006050

CLICK HERE FOR PROXIBID

 INVENTORY

MILL

-MELLOTT MODEL 210 HEAVY DUTY ROSSER HEAD DEBARKER W/ 5’X5’ CONTROL CAB W/ 60HP MOTOR SN#9221019
-PARTS OF MELLOTT DEBARKER
-PRECISION 55’ BARN SWEEP CONVEYOR W/ DRIVE
-PRECISION 30’ 3 STRAND LOG DECK W/ 3 ARM STOP & LOADER W/ HYDRAULIC DRIVE
-L& M BAR TYPE CUT-OFF SAW W/ 7.5 HP MOTOR W/ STOP GATE
-PARTS FOR L & M CUT-OFF SAW
-RECKART 20’ INFEED LOT TROUGH W/ 110 LADDER BACK CHAIN W/ DRIVE
-RECKART 15’ OUTFEED LOT TROUGH W/ 3 ARM KICKERS W/ HYDRAULIC DRIVE
-HMC 30’ 3 STRAND HEAVY DUTY LOG DECK W/ STOP & LOADER W/ HYDRAULIC DRIVE
-MELLOTT 20HP HYDRAULIC POWER PACK (CONTROLS CUT-OFF AREA)
-SINGLE LINE LAZER LITE
-HYDRAULIC CONTROLS
-CLEEREMAN MODEL 36 4 HEAD BLOCK CARRIAGE 18’ LONG W/ SHIFTING HEAD BLOCK W/ AIR ELECTRIC SETWORKS W/ TRACKWAY & PANTAGRAPH W/ CONTROLS
-PARTS FOR CLEEREMAN CARRIAGE
-RECKART 50HP END OF TRACK HYDRAULIC CARRIAGE DRIVE W/ DRUM PACKAGE W/ CONTROLS
-PARTS FOR RECKART CARRIAGE DRIVE
-HMC ALL STEEL HUSK W/ OFF BEARING BELT W/ 4’X4’ CONTROL CAB
-150HP 460 VOLT 1770 RPM MOTOR
-FRONTLINE CHAIN TYPE LOG TURNER
-HMC 20’ 3 STRAND LOG DECK W/ 4 ARM STOP & LOADER W/ HYDRAULIC DRIVE
-MELLOTT 24”X16’ SPIRAL ROLL CASE W/ DRIVE
-HMC 22’ 4 STRAND TRANSFER DECK W/ #78 CHAIN W/ DRIVE
-(2) RECKART 14”X14’ BELT CONVEYOR W/ DRIVE
-RECKART 60”X8’ BELT TRANSFER W/ DRIVE
-RECKART 24” X55’ BELT CONVEYOR W/ 24” X105’ BELT CONVEYOR W/ DRIVE COMING INTO HOG
-HYTROL 8” X16’ BELT CONVEYOR W/ DRIVE
-HYTROL 12”X20’ BELT TRANSFER
-SCMI M3 GAND RIG SAW W/ MOTOR & CONTROLS
-SAWS FOR SCMI GANG SAW & SPACERS
-MONTGOMERY MODEL 42PM HOG W/ TOP FEED BOTTOM DISCHARGE W/ INFEED SHCUTE W/ HYDRAULIC HOOD W/ HYDRAULIC POWER PACK SN#3066
-PARTS FOR MONTGOMERY HOG
-RECKART 80’ BARN SWEEP CONVEYOR W/ DRIVE
-3 LINE LAZER LITE SYSTEM
-8’ ROLLCASE W/ DRIVE
-(2) NEW ORGINAL RADIAL ARM SAW 7.5HP PHASE
-BRUNING & FEDERAL 42” SUCTION BLOWER W/ 25HP MOTOR W/ INCOMING & OUTGOING PIPE
-FRONTLINE 36” SUCTION BLOWER W/ 15HP MOTOR W/ INCOMING & OUTGOING PIPE
-CORNELL 36” BLOWER W/ 15HP MOTOR W/ INCOMING & OUTGOING PIPE
-APPROX 6’ CYCLONE
-APPROX 8’ CYCLONE
-CORNELL 36” BLOWER NOT MOTOR
-SCMI GANG RIP SAW W/ MOTOR & CONTROLS
-FRONTLINE 24” SUCTION BLOWER W/ 15HP MOTOR
-(4) 1HP HANDLE CHIP SAW 3 PHASE
-LOTS OF 56” F STYLE CIRCLE SAW
-(2) SCISSOR LIFT TABLE
-200HP 460 VOLT 1188 RPM MOTOR
-200HP 460 VOLT 1780 RPM MOTOR
-QUINCY 15HP TANK MOUNTED AIR COMPRESSOR
-AIR STORAGE TANK
-AIR HOSE REEL W/ HOSE
-POWER MATIC VERTICAL BAND SAW 3 PHASE
-COUNTY LINE 5’X5’ SELF DUMPING HOPPER
-WRIGHT 40”X5’ SELF DUMPING HOPPER

MISC
-BANDING CART
-NEW BANDING CART FOR METAL BANDING
-RENS HAND HELD METAL DETECTOR
-LOT OF PAINT MARTKERS FOR LUMBER
-(2) LUMBER GRADING STICKS
-TORCH CART W/ HOSES & GUAGES
-MILL 250 AC-DC WELDER
-LOT OF BELT LACER AND LACING
-ELECTRIC PALLET JACK W/ BUILT IN CHARGER & (2) PALLET JACKS
-LOT OF PEDISTIAL FANS
-CLEAN UP TOOLS & LADDERS
-LOG TONG-
-DEWALT SIDE GRINDER
-SHOP VACS
-BARRELS OF CAM 2 PROMAX AW 46 MVI HYDRUALIC OIL
-JOCKEY GRINDER
-ORGAN CHAIN SHARPENER
-42”X8’ STEEL WORK TABLE
-4’X8’ STEEL WORK TABLE W/ VISE
-STEEL WORK TABLE
-LOTS OF MATERIAL CARTS
-DOCK PLATE
-BTEK 4’X4’ PALLET SCALES W/ DIGITAL READ OUT
-PALLET W/ STRETCH WRAP
-DUAL BENCH GRINDER
-BELT SANDER
-BOLT BIN W/ CONTENTS
-CRAFTMAN 15 ½” DRILL PRESS
-18 SPEED DRILL PRESS
-20TON SHOP PRESS
-LOTS OF MISC BELTS
-LOTS OF MATERIAL RACKS
-PICNIC TABLES

ELECTRIC
-SCHNEIDER 150HP SOFTYPE STARTER W/ SQUARE D 200 AMP DISCONNECT
-SCHNEIDER 200HP SOFTYPE STARTER (STARTING THE HOG)
-SQUARE D 400AMP DISCONNECT
-ABB 150HP SOFTYPE STARTER