Formerly Braxton Lumber Co.
Listing ID#: 1503698

Auction Location

Heaters, WV 26627
Auction Dates and TimesSALE IS COMPLETED
Thursday Jun 8, 2023 Completed
Auction Type
 Live Auction 
Company Information
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

GoToAuction.com ID#: 5286
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
  2. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
  3. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:
“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
  2. Governing Law.
    1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
  3. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
  4. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  5. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
  6. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
  7. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
  8. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
    2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
    3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
    4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
    5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
    6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
    7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
    8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
    9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
    10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
    11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
    12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
    13. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
  9. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
  10. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
  11. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
  12. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
  13. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
  14. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
  15. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
  16. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
  17. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
  18. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  19. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
  20. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
  21. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
  22. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
  23. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
  24. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
  25. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
  26. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
  27. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
  28. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
  29. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
  30. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
  31. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
  32. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
  33. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
  34. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
  35. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
  36. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
  37. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
  38. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Information
Sawmill Liquidation and Heavy Equipment
 

00
Information Lot
Sawmill Liquidation and heavy equipment

HIGHLIGHT PIECES: Wood-Mizer LT-70 sawmill, numerous farm tractors, wheel loaders, trailers, and more.

AUCTION/SELLER STORY: After 50 years in the sawmill industry, Braxton Lumber will sell its complete sawmill operation at live, onsite, no-reserve auction on June 8, 2023, at 9 am. The auction offers a unique opportunity to acquire high-quality, well-maintained equipment, including "like new" Wood-Mizer equipment, top-of-the-line McDonough equipment, and more. Bright Star Auctions is honored to conduct this event, providing a fair and transparent bidding process. Register in advance to bid online or show up onsite the day of the auction to take possession of this equipment and continue the legacy of Braxton Lumber in your own way.

01
Preview Information
June 5th - 7th from 8 am to 4 pm. Contact Jonathon to make an appointment 574-821-7530

02
Loadout Information
Free loading will be available Friday June 9th from 7-5 and Saturday June 10th from 7-noon. After that it will be by appointment only and at the buyers expense.
RIGGERS: Tenex Industrial. Joe Fisher is the contact 717-314-7317

03
Payment Information
Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction.
 

92
CAT 555D Wheel Skidder 1:50 Scale Replica - Die Cast Metal
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s
 

92
CAT 555D Wheel Skidder 1:50 Scale Replica - Die Cast Metal
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s
 

98
Heavy Equipment Key Set 36 Keys
Shipping available for $20

98
Heavy Equipment Key Set 36 Keys
Shipping available for $20

99
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

100
4 Strand Log Deck with Stop'N'Load
(1st lot of an entirety) Electric drive, hydraulic cylinder on loading arm, 14'6" x 27', includes steel log bumpers on sides as marked, includes structural steel to ground and catwalk around sides.

101
Rosserhead Debarker
(Part of entirety) 40 hp electric drive on cutting head, cutting head swivels, air cylinders on truck lift, 3" x 26" bull wheels, hydraulic cylinders on log kickers, hydraulic drive on bull wheels, 9' 6" x 26' 6" overall, 6' x 7' x 8' tall, cab with all controls included.

102
Incline Paddle Chain Waste Conveyor
(Part of entirety) 2 1/2" x 14 1/2" paddles, electric drive located under debarker, includes slide pan, 14" sides, 17" pan, 3' x 75' overall

103
10 hp Hydraulic Pack
(Part of entirety) 2' x 3' x 12" tank, pump, valves, includes all hydraulic lines and hoses to equipment

104
Debarker Entirety of Lots 100-103
With 10% raise.

105
4 Strand Log Deck with Stop'N'Load
Main deck is 13' x 26', includes 3' x 13' 6" nose skids, electric drive with Tulsa gearbox, includes steel tubing as marked

106
64" Bar Type Log Turner
Hydraulic drive, hydraulic cylinder, 28" x 6' frame

107
HMC AC44 3 HB Carriage
(1st of an entirety) SN: AC44-160, includes pantograph, air dogs, 5/8" dogs, tong dog, 1st HB to 2nd HB-66", 2nd HB to 3rd HB-55", 8' x 17', 4 axle, air over 110 setworks, controls in cab included

108
Carriage Truck
(Part of entirety) 64" center to center, 68' long, includes structural steel to ground, includes pulleys mounted in truck

109
Tyrone Berry Carriage Feed and Drive
(Part of entirety) SN: A2850, Model: SMA-225, Spool of 3/4" steel cable, gearbox, hydraulic pumps, 1800 rpm, 1500 psi, 60 hp electric motor, 26 x 32 x 16" tank, includes all hydraulic lines to equipment

110
Slab Dump Conveyor
(Part of entirety) Air cylinder for dump, electric drive, 28" belt, 4' x 15' overall, includes air valve

111
40 Hp Hydraulic Pack
(Part of entirety) 3' x 3' x 30" tank, includes pumps, valve station and all hydraulic lines to equipment

111A
Electric for Carriage Entirety
(Part of an entirety) Motor starters for carriage, carriage drive, and hydraulic pack

112
Sawyer's Cab
(Part of entirety) 55" x 100" x 7' tall, has AC unit, is insulated, does not include any controls, controls go to equipment they were used on

113
HMC AC44 Carriage Entirety of Lots 107-112
With 10% raise.

113A
Jacobson AC/DC Carriage Drive
Setworks box with 250A, 600 VAC 460V transformer, 125 hp electric motor with blower motor, includes conduit from boxes to equipment

114
McDonough 6' Head Rig
SN: 72-MA-344, 11 1/2" x 6' band wheels, 1" mead on top wheel, 9" band, 28" x 5' off-bear slat conveyor with electric drive, lineal positional cylinder, air strain, does not include main electric drive

115
Electric Motor
444T frame, 150 hp, 1770 rpm

115A
VMX Solid State Soft Starter
Model: VMX-361-BP, 126 hp at 208 V, 126 hp at 240 V, 300 hp at 480 V, 360 hp at 800 V

116
Laser System for Band Mill
24' long, includes steel supports

117
Belt Conveyor
16" belt, 6" sides, 20" x 30', electric drive, includes slide pan

118
Paddle Chain Waste Conveyor
Electric drive, 14 1/2" paddles, 2' x 100' long overall, includes structural steel to ground

119
Roll Case
12" x 29.5" rolls, 24" spacing, 44" x 65" long, 16 spiral rolls, 13 regular rolls, electric drive, includes slide ramp for unloading

120
4 Strand Transfer Deck
Missing chain on 2 strands, H78 chain, electric drive, air cylinder on cant loading arm 12.6" x 21'. Includes slide ramp to rails

121
McDonough 6' Line Bar Resaw
(1st of entirety lot) SN: 72-MA-398, Air strain, missing lineal positioning cylinder, 11" x 72" band wheels, 1" meat on top wheel, 34" x 11'6" feed rolls, 3 power feed roll arms, hydraulic on all feeds, hydraulic cylinders, does not include main electric drive, SN on feeds rolls LBR-43, there are no setworks or controls included with this system

122
Electric Motor
(Part of entirety) 150 hp, 1780 rpm, 460 V, 444T frame

123
Infeed Roll Case
(Part of entirety) 8" x 36" rolls, 22"-42" spacing, 3-32" 2 way transfers, hydraulic drive, 4' x 18'

124
Outfeed Roll Case
(Part of entirety) 8.5" x 43" rolls, 24" spacing, hydraulic cylinder for width adjustment, 5' x 28', hydraulic drive

125
4 Strand Transfer Deck
(Part of entirety) 14' 6" x 6', 4-54" pop-up arms, does not include shaft on end against 180 degree deck, hydraulic drive

126
McDonough 4 Strand 180 Degree Transfer Deck
(Part of entirety) 12.6" wide, 23' inside to inside, hydraulic drive, includes support steel to ground

127
4 Strand Transfer Deck
(Part of entirety) Does not include shaft on end against 180 degree deck, hydraulic drive, cant loading arm

127A
Operators Cab
(Part of an entirety) Includes control panels for run around system, 6' x 8' x 7' tall, needs glass replaced

128
Hydraulic Unit
(Part of entirety) (1) 20 hp motor, includes cooling unit and electrical panel, (1) 50 hp motor, includes all pumps and valve stations, 2' x 6' x 28" tank, includes all hydraulic lines to equipment, includes stand

129
5 Hp Hydraulic Pack
(Part of entirety) 14" x 24" x 20" tank, includes all hydraulic lines to equipment

130
Entirety of lots 121-129
With 10% raise. There are no setworks or controls included with this system

131
Belt Conveyor
Electric drive, includes cut off, 9" belt, 36' long

132
Belt Conveyor
Electric drive, 29" belt, 56" x 25'

133
4 Strand Transfer Deck
Electric drive, 12' 6" x 8' 6", (4) 4' pop-up arms

134
4 Strand Transfer Deck
10' 6" x 10', 3' of transfer is pop-up with air cylinder, electric drive

135
Corley Gang Edger
SN: E-648-028, 6" x 48" capacity, 54" x 9' 6" infeed rolls, laser light, hydraulic controls, include 5 hp hydraulic pack, 10" x 25" x 24" tank, 2 blades, 1 moveable, 75 hp electric motor, includes electrical and control box, twin tailing belt outfeed, 6" x 20' belts

136
Belt Conveyor
Electric drive, 30" belt, 4' x 25'

137
Cant Slide Rack
13' x 14' decline with 6' flat section

138
4 Strand Transfer Deck
Electric drive, C55D rooftop chain, 10' x 42', includes 9'6" x 38' steel stacking rack

139
5 Strand Transfer Deck with Rolls
12' 6" x 15', does not include shaft on end against trim saw, (5) 6" x 42" rolls, roller chain with pegs, strands are offset

140
Hemco 10 Head Drop Saw Trimmer
7.5 hp motor on each head, 22" saws, 2 heads are not setup, 20' capacity, includes 6' x 19'6" slide pan, includes control panel, 7' x 22' overall, 18" x 20' waste conveyor

141
4 Strand HMC Green Chain
SN: 872-77, Model: LT24, 10'6" x 98', electric drive

142
Horizontal Air Tank
20" x 5'

143
Horizontal Air Tank
2' x 66"

144
Air Compressor
No drive, 2' x 66"

145
Sullair LS160 Air Compressor
SN: 003-133002, 75 hp electric motor; includes air filter, exhaust pipe, and air line to equipment

146
Sullair LS12 Air Compressor
SN: 003-106899, meter reads: 5,190 hours, 60 hp electric motor; includes air filter, exhaust pipe, and air line to equipment

147
Dust Conveyor Paddle Chain
16" x 90' x 14 1/2" paddles, electric drive

148
Belt Conveyor
26" belt 6" side, 32" x 95', electric drive

149
Belt Conveyor
6" belt, 6" side, 18" x 60', electric drive

150
Fulghum 60" Chipper
(1st of an entirety) 4 knives, no drive

151
Westinghouse Electric Motor
(Part of an entirety) 150 hp 1775 rpm, 445T Frame

152
Westinghouse Soft Start
(Part of an entirety) Model: VMX series

153
Fulghum Shaker Screen
(Part of an entirety) Model: 8X8 screen, SN: FIR-953, includes 6' cyclone with pipe to chipper

154
Phelps Fan Chip Blower
(Part of an entirety) 48" blower with 3 truck loading chutes

155
28" Blower
(Part of an entirety) no motor

156
Chipper Entirety of Lots 150-155
With 10% raise.

157
Fulghum Vibrating Conveyor
35' long, 18" pan, 8" sides, electric drive, chipper feed chute

158
Chain Conveyor
18" x 54', 14" paddles, 32" slide pan, 6" sides, electric drive

159
Chain Conveyor
26' long, 10" sides, 18" wide, electric drive

160
Belt Conveyor
56' long, 30" wide, 28" belt, 6" sides, electric drive

161
Hydraulic Pack
Electric drive, fire damage

162
Clarksville Machinery Rip Saw
SN: R-71, Electric drive, manual width adjustment, 7" x 64" Skate roll outfeed, (2) 6" x 6' chain feeds, no blade, 24" width capacity.

163
Lincoln Electric Motor
150 hp, 1780 rpm, 444T frame, 460 V, 3 3/8" shaft

164
Gator Fast Line DBL End Trim Saw
Electric drive, 18" blades, 6' width capacity, both heads are moveable, includes electrical disconnect, 7' x 9' overall, manual head movement.

165
2 Blade Scragg Edger
20 hp electric motor on each head, no blades included, fits up to 20" blades, 12' 1 strand chain feed, 5' x 12' overall.

167
Belt Conveyor
23" belt, 32" x 31", electric drive.

165A
Square D Model 5 Motor Control Center*
600 amps horizontal, 300 amps vertical, 8 vertical sections, does not include any conduit

165B
Conduit*
Includes all conduit from Lot 165A to equipment, does not include any 110V conduit or any conduit or wiring for the building

166
Yates 612 4 Head Planer/Molder
SN: B29560, 3 upright heads, 8" x 12" capacity, electric drive, includes catwalk around plainer, includes control stand, does not include any dust pipe.

168
2-Strand Log Deck
(1st of an entirety) 80" x 17'6", has Tulsa gearbox but no motor, includes support steel to ground

169
Frick 3 HB Handset Carriage and Track
(Part of an entirety) 36' of track, 34" center to center, 1/4" cable, includes pulleys and cable drum, 52" x 15' carriage wooden frame on track and carriage, 1st HB to 2nd HB is 64", 2nd HB to 3rd HB is 48"

170
60" Frick Husk
(Part of an entirety) 56" saw IX7P style, 40 x 88" wooden frame, 22" x 80" off bear, 2 3/16 x 64 mandrel shaft

171
6 Cylinder Detroit Diesel Power Unit
(Part of an entirety) Includes exhaust pipe, radiator and pulley mounted to clutch

171A
Building and Crib Blocks
(Part of an entirety) Includes all wooden blocks and beams under lots 168-171, includes building

172
Frick Circle Mill Entirety of Lots 168-171A
With 10% raise.

175
Armstrong Band Stretcher Roll
SN: 46267, Model: 5-14 includes all rolls, 12" x 48" x 4" hammering block

176
Armstrong #4 RH Band Saw Sharpener
SN: 16182, includes all swedges as pictured, includes all clamps and stands as marked, Clamp model 58B

177
Welding Table with Grinding Wheels
24" x 57" x 42" tall table mounted on Eastors, Armstrong #16 welding clamp mounted on table, approx. (95) 12" x 7/8" x 1 1/4 grinding wheels, used

178
Carriage Cable
(2) partial rolls of coated 3/4" steel cable, length unknown

179
McDonough Knife Grinder
SN: BDM-673, 4" bench vise mounted on stand, includes all tools plus parts on stand and in drawers

182
Lincoln SP-135 Plus Wire Welder
Code: 10868, SN: U1010510952, 115 V single phase input, includes gas tank, mask, and cart

180
Armstrong #14 Band Shear
Mounted on castors, manually operated

183
Cutting Torch Set
Includes oxygen and Acetylene tanks, gauges, leads, and mask

181
Bands
(12) 12" bands, fit lot # 114 or 121, includes partial rolls of edge guard, (175) sharpening room, (421) smalls

184
Space Heaters
50000 BTU Mr. Heater-110V plus fuel, 45000 BTU Protemp-110V plus fuel, 20" floor fan-110V

185
Hand Tools
36" cant hook, scoop shovel, 48" crow bar, DeWalt 7" corded grinder with wire brush heads

186
4-Strand Log Deck with Stop'n'Load
10'6" x 30', includes 10' x 12' steel plate section and catwalk on side of deck, hydraulic cylinder on arm, has Tulsa gearbox but no drive, includes support steel to ground

187
4-Strand Log Deck with Stop'n'Load
Hydraulic drive with Tulsa gearbox, 10'6" x 16'6", includes support steel to ground, no cylinder on loading arm

188
Reckart 36" Chain Type Log Turner and Nose Skids
(1st of an entirety) No drive or cylinder, 42' x 10'6" section of nose skids

189
Carriage Track and Feed
(Part of an entirety) Drum of 3/4" cable and pulleys, 45" center to center of track, 51' long, includes support steel to ground

190
56" Husk
(Part of an entirety) Includes 56" F8 style saw-not installed, 22" x 64" off bear with 13" belt, runs off mandrel, 2 15/16 x 5" mandrel shaft, includes hydraulic pump and lines hooked to mandrel, 4' x 4' x 6' tall cab included.

191
Balder Electric Motor
(Part of an entirety) 100 hp, 1760 rpm, 405T frame, 230/460V

192
Ajax Motor Starter
(Part of an entirety) 100 hp, 3 ph, 460V

193
2 Blade Vertical Edger
(Part of an entirety) 30 hp electric motor, (2) 20" blades, both moveable, 6 1/2 x 36" capacity, hydraulic cylinders for blade movement

194
Entirety of Lots 188-193
With 10% raise.

195
Belt Conveyor
21 1/2" belt, 30" pan, 3' x 58', electric drive, includes support steel to ground

196
Belt Conveyor
Electric drive, 8" belt, 3 1/2" sides, 14" x 10', located under edger

197
Belt Conveyor
Electric drive, no belt, 8 1/2" pan, 7" sides, 20" x 20"

198
4 Strand Green Chain
C55B rooftop chain, 13' x 25'6", 33" belt between 2 strands, electric drive

199
Double End Trim Saw
2 moveable heads, electric drive, includes control panel, 30" saws, 8' x 20' overall, 18' max board length

200
Circle Mill Building
Includes all steel posts, roof metal, all wall and rafter materials, dues not include small building with all electrical, includes all catwalk and support steel, not lotted otherwise, main part is 43' x 120", 28' x 90' add-on for green chain, 28 x 30' storage room, 13-13'6" wall height

200A
Break Room Building
16 x 24' main building, 10 x 16' front porch addition, 8' walls mounted on blocks, includes all chairs, benches, sinks, etc. in building

200B
Single Wide Trailer
10' x 16' deck, 13' x 53' main trailer, 8 x 12 front porch, 2 bed 1 bath, includes furniture and appliances

201
Fulghum 48" 6 Knife Chipper
(1st of an entirety) 100 hp electric motor

202
Fulghum Shaker Screen, and Cyclone
(Part of an entirety) 5' x 5' screen, 3' x 3' cyclone including chip pipe from blower to cyclone

203
24" Chip Blower
(Part of an entirety) Needs repair, no drive, includes dual chip chute, 10" x 12" top feed

204
Fulghum Chip Pack Entirety of Lots 201-203
With 10% raise.

205
Vibrating Conveyor
2' x 22', includes chipper infeed section, 19" pan 4" sides, no drive

206
Belt Conveyor
No belt, no drive, 12" x 27' overall, 7" pan and sides

207
Double Head Notcher
9" heads, 6' lift capacity, electric drive, 8'6" x 10' overall

208
Maltros Belt Conveyor
SN: MO923, 50" belt, 64" x 10'

209
Roll Case
20" x 8' air cylinder, 4" x 12" rolls, 12" spacing

210
Double End Trim Saw
No blades, one moveable head, 7' width capacity, electric drive, 6' x 8'

211
Kenwell Jackson Chamfering Machine
Model: 3000E, SN: 791697, 480 V, electric drive, 32" x 7'

212
Bronco Pallet Stacker
Model: 238, SN: 200, 40 x 55 max pallet size, air cylinders, 5' x 5' incline feed, no drive

213
Froedge Deduster
Model: 450 LBD, SN: 23719L, 8" width capacity, 4 1/2" height capacity, electric drive

214
Cornell Slab Saw
24" blade electric drive, 15 x 26 x 13" hydraulic tank, includes control panel hydraulic cylinder on head

215
Single Head Notcher
9" head electric drive 7" width capacity, 42" x 64" overall.

216
Roll Case with Pop Up Transfer
Electric drive, air cylinders on pop-up, 3 1/2 x 25" rolls, 18-24" spacing, 3 strand 5' x 14' pop-up skate rolls, 64" x 16'6"

217
Tower Edger
Set up to run off PTO, 4 x 36" capacity, (2) 14" moveable blades, 3' x 7' infeed dead rolls, 40" x 7' outfeed landing table

218
Hobart Mega-Arc Welder
SN tag is missing, powered by a Ford 4 cylinder gas engine (Model: LSG-4231-6005-A, SN: 17565-T-21-TH), mounted on 4 x 8 x 5' tall frame, has rack for gas/oxygen tanks

218A
Swingine Arm Chopsaw
No drive, includes jack shaft for PTO, 26" blade, 16" x 5' skate roll feed, 8' x 10' x 9'6" overall with frame, manual pull on saw

219
10 Head Drop Trim Saw
No chain on feed, no drives included, set up for electric, no saws installed, fits up to 26" blades, 9'6" x 26' overall, 20' max board length.

220
Steel I Beams
(4) 7" x 16" x 20' long, 1/2" steel, 15 pieces

290
2019 Wood-Mizer LT70 Super Hydraulic Wide Throat Portable Bandmill
(1st of an entirety) VIN: 456D72415KNGA5224, 457 original hours! Powered by a Yanmar 4TNV86 diesel motor rated at 37-56 kw, 64" wide loading arm, debarker mounted on mill, 8-14.5 tires, 2 fenders included, includes extra debarker, extra support legs, and more misc. extra parts, 30 x 68" landing table, includes Wood-Mizer automated setworks, pulls with 2 5/16" ball. Runs flawlessly.

290A
Wood-Mizer Bed Extension
(Part of an entirety) Fits all Wood-Mizers LT28 and up, 3' x 6', Revision Level-A2.02

291
Wood-Mizer Incline Belt Conveyor
(Part of an entirety) SN: 1C5-S06190796A5.02, Electric drive, 24" cleated belt, 8" flared sides, includes control box, and box of mounting bolts, adjustable legs, 42" x 19'6", 208V, single ph.

292
Bands
(Part of an entirety) All Sharpened, (20) 1 1/2", (25) 2", approx. 45 total blades

293
Wood-Mizer BMT 250 Band Sharpener
(Part of an entirety) SN: BMS/337/2019, 110 V plug in, includes control panel

294
Wood-Mizer BMT 200/250 Band Tooth Setter
(Part of an entirety) 115/230 V, includes control panel, in good condition.

295
Wood-Mizer 2 Strand Log Deck with Stop'n'Load
(Part of an entirety) 64" x 14' plus 4' loading arm, hydraulic drive, hydraulic cylinder on loading arm, set up to run off hydraulic hookups on lot 290

296
Wood-Mizer LT70 Entirety of Lots 290-295
With 10% raise.

297
2019 Wood-Mizer EG 200 Twin Blade Portable Edger
(Part of an entirety) VIN: 456A11417KNCB2274, Meter reads: 1443 original hours, Kohler 26.5 hp gas motor, (2) 14" blades - 1 moveable, 26' x 77" skate roll infeed, 3 x 24" infeed capacity, 28" x 10' skate roll outfeed bolt on, 215/75R14 tires, pulls with 2" ball manual blade movement, in great condition.

298
Skate Rolls
(Part of an entirety) (1) 12" x 8' x 38" tall - 2 x 12" rolls, 13" spacing, (1) 2' x 5' - 2 x 20 1/2" rolls, 3" spacing

320
LB Performance G700 Road Grader
SN: 104416, Cummins Diesel Engine (SN: 73630217), Meter reads: 254 hours, 15-19.5 tires, fully enclosed cab with heat/AC, hand controls, runs and operates great.

299
Wood-Mizer Master Entirety of Lots 290-298
With 10% raise.

300
2001 Bobcat 873 Turbo Skid Steer
SN: 514149041
Meter reads: 2,677 hours
Engine: Deutz BF4M Diesel, rated at 53.6 KW
Fuel type: Diesel
ROPS: Fully enclosed cab, needs new door
2 Speed: Yes
Highflow: Yes
Lift capacity: 2,400 lbs
Attachments: 28" x 78" quick attach bucket
A/C: Yes
Heater: Yes

Features and Notes: 12/16.5 tires, in good condition, hand controls.

301
Kubota RTV X900 Utility Vehicle
PIN: A5KB2FDBHKG053555, SN: 53555, 767 hours, 40' x 5' dump bed, rebuilt rear axle 5/23, diesel engine, runs great with no issues. Has title

302
2012 John Deere 855D Gator
VIN: 1M0855DSECM044487, 999 hours, has 4x4, 44" x 50" dump bed, 1000 lb max capacity for bed, John Deere 3TNV70 motor engine (SN: CH3009D240310), runs and drives good manual dump. Has title.

303
DLA 1979 Forklift
Model: ACP-60-B-PS, SN: 110535, meter reads 474 hours, 6000 lb capacity, 3-stage, 80" tall mast, no sideshift, gas powered, 7.0 x 15-5.5 solid tires on front, 7.5 x 10-5 solid tires on rear, 5 x 40" forks, not running, condition unknown.

304
2005 CAT 924G Wheel Loader
SN: 9SW01004
Meter reads: 27,472 hours
Engine: CAT 356 (SN: 8XJ01383)
Fuel type: Diesel
ROPS: Fully enclosed cab
3rd Valve: Yes
Center to center of pins: 19.5"
Tire Size: 20.5R25
Attachments: Rockland Grapple forks, 7" x 44" forks, 70" width
Heater: Yes
A/C: Yes
Quick Attach: No

Runs and operates like it should. 
 

305
2016 Komatsu WA 270-7 Wheel Loader
Meter reads 8974 hours, Komatsu diesel engine rated at 154 hp, 20.5R245 tires, has quick attach system, includes JRB forks (64" wide, 6 x 54" forks), bucket not included, fully enclosed cab with heat/AC, radio, digital display, and backup camera, SN: begins with 8110 - rest of the tag is missing. Good running machine

305A
WB Quick Attach Loader Bucket
SN: 24984512, 3 1/2 cubic yard capacity, 3' x 100"

305B
New! Wheel Loader Tire
20.5R25, will fit lot 304 and 305

305C
Craig Wheel Loader Forks*
Pin Through style, SN: 88860, fits Komatsu WA120

305D
Craig Wheel Loader Jib Crane*
SN: 88911, Pin through style, 6-10' long,

309
1988 CAT 963 Track Loader
SN: 21Z01777, CAT 3304 Diesel engine (SN: 12Z24950), meter reads: 11745 hours, hand and foot controls, 22" tracks, 32" x 8' tooth bucket. Good running condition. 

310
2004 John Deere 435 Series II Knuckleboom
SN: WC0435X012216
Meter reads: 6,526 hours
Engine: John Deere 6068 Diesel
Fuel type: Diesel
Continuous Grapple: Yes
Trailer: 2004 Pitts (VIN: 5JYKB39264P041272)
Delimber: None
Bucksaw Hookups: Yes
A/C: Yes
Heater: Yes

Features and Notes: Rotobec grapple, Model: 6606HD, SN: 1250001R2-538783, 6' max width, Fully enclosed cab, Pilot joystick controls, 11R 22.5 tires. Runs great, no issues. Trailer has title.

311
1970 Barko 160A Knuckleboom
SN: 15392
Meter reads: 6,565 hours
Engine: Detroit Diesel 351
Fuel type: Diesel
Continuous Grapple: Yes, 64" max width
Trailer: No
Delimber: No
Bucksaw Hookups: No
A/C: No
Heater: No

Features and Notes: Pilot joystick controls, self-propelled. Overall dimension 24' long x 8' wide x 15' tall, 17.5-25 tires, starts and runs strong, operates as it should. Trailer does not have a title, bill of sale only

316
CAT D6H Series II Crawler Dozer
Meter reads: 9,877 hours, hand and foot controls, 36" tracks, CAT diesel engine, 12'6" 4 way blade, serial tag is missing. Good running machine that is ready for work

320A
Galion Road Packer
Model: S4-6B, SN: WD81355, Dresser 4 cylinder diesel engine, 32 x 40" rear drum, 48 x 40" front drum, 9.0-20 tires, not running condition

322
2005 CAT 420D Backhoe
PIN: CAT0420DPBLN12747, meter reads: 5200 hours, 19.5-24 tires on rear, 320/80-18 tires on front, CAT diesel engine (SN: CRS25257) has quick attach system, includes quick attach forks (5" x 54" forks, 5' wide), includes quick attach bucket, 32" x 88", includes 2" excavator bucket with 5 teeth. In good running condition 

326
Hesston 55-56 LM108 Tractor
SN: 078828
Meter reads: 5,562 hours
Engine: Fiat 8035-06
Fuel type: Diesel
Transmission type: 4 speed manual
Drive: RWD
Rear PTO: Yes
3 Point hitch: Yes

Features and Notes: Has auxiliary hydraulic hookup in back 540/1000 PTO, starts right up and runs good, 14.9-28 tires on rear, 9.5-15 tires on front.
 

327
White 255-82008 Tractor
SN: 285848421
Meter reads: 2,391 hours
Engine: White Diesel (SN: 4009554)
Fuel type: Diesel
Transmission type: 6 speed manual
Drive: 4WD
Rear PTO: Yes
3 Point hitch: Yes

Features and Notes: 18.4-26 tires on front, 20.8-38 on rear, can be used with duels, has 6 hose auxiliary hydraulic bookup, starts and runs good.
 

328
White 211-83050 Tractor
SN: 303610436
Meter reads: 8,398 hours
Engine: Diesel Engine (SN: TU70018U734258L)
Fuel type: Diesel
Transmission type: 6 speed manual
Drive: RWD
Rear PTO: Yes
3 Point hitch: Yes

Features and Notes: 16.9-28 tires on front, 18.4-38 on rears setup for duels, has 6 hose auxiliary hydraulic hookup, starts and runs great.
 

329
White 255 Tractor
Meter reads: 4,227 hours
Engine: White Diesel (SN: 4006435)
Fuel type: Diesel
Transmission type: 6 Speed manual
Drive: 4WD
Rear PTO: Yes
3 Point hitch: Yes

Features and Notes: 11-16 tires on front, 480/80R38 on rear, setup for duels, 4 hose auxiliary hydraulic hookup, starts and runs good.
 

329A
White 155-22007 Tractor*
SN: 274994-415
Meter reads: 4,144 hours
Engine: White (SN: 4004263, Model: D5000TX9-155
Fuel type: Diesel
Transmission type: 6 speed manual
Drive: 2 RWD
Rear PTO: Yes
3 Point hitch: Yes

Features and Notes: 20.8R38 tires on rear, set up for duals, 11.0-16 tires on front, starts and runs strong
 

330
McCormick Farmall H Tractor
SN: 74191-X1
Engine: 4 cylinder
Fuel type: Gas
Transmission type: 5 speed manual
Drive: RWD
Rear PTO: Yes
3 Point hitch: No

Features and Notes: 1815 rpm on idle, needs battery, does not start, new seat, 15.5-38 tires on rear, 6.0-16 tires on front.
 

331
2006 John Deere 7520 Tractor
SN: RW7520R051703
Meter reads: 4,520 hours
Engine: John Deere 6.8L Power Tech
Fuel type: Diesel
Transmission type: Power-Shift
Drive: 4WD
Rear PTO: Yes
3 Point hitch: Yes

Features and Notes: 150 hp, 380/85R28 tires on front, 460/85R38 tires on rear, fully enclosed cab with air ride seat, Heat/AC, digital display, runs strong, good tractor.
 

332
John Deere 6310 Tractor
SN: L06310M272389
Meter reads: Meter is blank. Aprox. 2700-2800 hours per previous owner
Engine: John Deere 4045 (SN: CD4045T587090)
Fuel type: Diesel
Transmission type: Power Shift
Drive: 4WD
Rear PTO: Yes
3 Point hitch: Yes

Features and Notes: 99 hp, 380/85R24 tires on front, 18.4-34 tires on rear, auxiliary hydraulic hookups, open cab, starts and runs strong, great tractor.
 

333
John Deere Model 60 Tractor*
SN: 6060776
Fuel type: Gasoline
Transmission type: 6 speed manual
Drive: RWD
Rear PTO: Yes
3 Point hitch: No

Features and Notes: Has power steering, 13.6-38 tires on rear, 6.0-16 tires on front, does not run.
 

334
John Deere Model A Tractor*
SN: 430999
Fuel type: Gasoline
Transmission type: 2 speed manual
Drive: RWD
Rear PTO: No
3 Point hitch: No

Features and Notes: Has drawbar, 12.4-38 tires on rear, 5.5-16 tires on front, does not run
 

335
John Deere 5830 Silage Chopper
John Deere 6619 Diesel (SN: RG6619A055436), meter reads: 1387 hours, fully enclosed cab with heat/AC, 14.9-24 tires on rear, 23.1-26 tires on front, extra counter weight on rear, John Deere chopping head (SN: FORBMDX750156), Does not include Kemper Corn Head. This chopper was recently gone thru and is field ready. Great unit.

335A
Kemper Champion 330 Corn Shopping Head*
10' Wide, Was used on Lot #335,Freshly gone through by shop

335B
John Deere Kernel Processor Head*
SN: E000KPX783143, 7' long, 2' wide infeed, Fully rebuilt by shop, Used for less than 15 acres since rebuild

335C
John Deere 5830 Silage Chopper Entirety of Lots 335-335B*
With 10% Raise to Open the Bid

336
John Deere 5830 Silage Chopper
PIN: E05830X927170, John Deere 6619 engine (SN: RG6619A061234), meter reads: 4,267 hours, 14.9R 24 tires on rear, 750/55R 26 tires on front, fully enclosed cab with heat/AC. Field ready.

336A
John Deere 80" Hay Chopping Head*
SN: E0RBMDX926915, Was used on Lot #336, Was just fully gone through by shop

337
John Deere 4 Bottom Plow
Model: A1450, SN: 124604, 24" plow bottoms, 18" discs, 3 pt. hitch and hydraulic hookups, 11L-14SL tires, 19' long overall

337A
Hay Tetter Rake
Model: RCS8, pulls pin through hitch, hydraulic hookkups, hydraulic cylinder for control arms, (9) discs-56", 19' wide when folded down

338
Bush Hog Disc*
Hydraulic hookups and pin-through hitch, hydraulic cylinders for disc control, 14' x 22' wide when folded down, 20" discs, 11L-15 8 ply tires

338A
Cultivator*
Hydraulic hookups and pin through hitch, hydraulic cylinders for controls, 16 x 54" rolls, 12.5L-15 tires, front 2 rolls need repaired and reinstalled, 12' x 23' wide when folded down

339
80" Brush Hog
SN: 028-8008, 3 pt. hitch, runs off PTO, has stump jumper, hydraulic hookups,

339A
80" Brush Hog
SN: 20902, 3 pt. hitch, runs off PTO, hydraulic hookups, has stump jumper

339B
2013 Vicon Spreader
Model: PS225, SN: VN2160301784, 3 pt. hitch, runs off PTO, holds up to 385 kg

339C
Massey Ferguson 2-Bottom Plow
SN: 248-013541, 3 pt. hitch, 18" plow bottoms

339D
Bush Hog Scraper Blade
Model: 100, SN: 12-10327, 3 pt. hitch, hydraulic hookups, 18" x 9' blade

339E
Woods 75" Brush Bull*
Model: BB720, SN: 859885, 3 pt. hitch and PTO hookup

339F
Bale Spear*
44" long spear

339G
Century 200 Gallon Sprayer*
3 pt. hitch and hydraulic hookup, (4) 90" arm sections

339H
Farm King Grading Rake*
3 pt. hitch, 74" wide, manual angle adjustment

339I
John Deere Lawn Sweeper*
44" wide, pin through hitch for lawn tractor

339J
Bobcat Sweeper*
Standard quick attach plate, hydraulic hookups need repair, 4' x 5' wide

339K
Frontier Spreader*
SN: 1XFSS20BAC0297751, 3 pt. hitch, PTO hookup, 3' wide at top, 28" tall

339L
Spreader*
3 pt. hitch, PTO hookup, 4' wide at top, 3' tall

339M
Snow Blade*
Standard skid steer quick attach plate, 90" wide, hydraulic hookup for blade angle

339O
John Deere Roto-Tiller*
3 pt. hitch and PTO hookup, 80" wide, needs repair

339P
Double Deck Brush Hog
Mounts with belly PTO plate, (1) 64" and (1) 54" deck, hydraulic hookups, includes hydraulic tank, needs repair

339Q
Hydraulic Tanks with Pump
(2) 2' x 2' tanks, pump and hose valves mounted on 1 tank

339R
Jeep Hood
Fits 1975 model Jeep

340
New Holland 354 Feed Mixer
Runs off PTO, pulls with pin through hitch, 31 x 13.5-15 tires, holds up to 5600 lb at 56 lb/bushel, fold up augers, works as it should

341
2003 Mack Dump Truck
VIN: 1M2AG10C03M005353
Meter reads: 604,232 miles
Engine: Mack A1 460 (SN: 201435) rated at 460 hp
Transmission: Maxi Torque 8 speed manual
GVWR: 62,000 lbs
Front axle rating: 18,000 lbs
Rear axle rating: 22,000 lbs
Heat/AC: Yes
Wet kit: Yes

Features and Notes: Air ride seat, starts and runs strong, Beau-Roc. SN-DL324865, 8' x 18' x 5' dee, Tri-Axle 11R24.5 tires on rear, 385/65R22.5 on front. Well maintained truck that is road ready. Has title

342
1991 5 Ton 6x6 Military Truck
VIN: 23704542
Meter reads: 8,778 miles
Engine: Cummins Diesel
Transmission: 5 speed automatic
Heat/AC: No
Wet kit: No

Features and Notes: 92" x 14' flatbed with 14" fold down sides, 14R20 all around.

339N
Bobcat Packer*
Standard quick attach plate, hydraulic hookups, 2' x 4' roller

343
White RBM64G Semi Truck
VIN: G9GCAAA852161
Meter reads: 386,649 miles
Engine: 6 cylinder diesel
Transmission: 8 speed Eaton Fuller
GVWR: Unknown
Heat/AC: No

Features and Notes: 11R24.5 tires, has air brake lines, does not start or run. Has title

349
1973 Seagrave Ladder Truck
Model: SR20T86, SN: B73161, automatic transmission, 51583 miles, air brakes, does not run, 1 - 32' ladder, 1- 45' ladder, approx. 128' long main ladder. No title, bill of sale only

349A
American Lafrance Fire Truck
Does not run, selling as parts machine, meter reads 28,443 miles, automatic transmission. No title, bill of sale only

344

351
Sullair Portable Air Compressor
Model: 185-DRO-JD, SN: E0A117549, 125 mas psig, John Deere 4039DF engine (SN: CD4039D212219), diesel fueled, meter reads 540 hours, reel of hose mounted on front pulls with pintle hitch, 215/75R15

352
1974 Fruehauf Chip Trailer
VIN: HPR472383, 68000 lb GVWR, 40' long, 92" inside width, 97" inside height, 11R22.5 tires, includes spare tire and 3' 6 tooth backhoe bucket. Has title

353
1974 Fruehauf Chip Trailer
VIN: HPS494725, GVWR: 68000 lb, 40' long, 11R22.5 tires, 93" inside width, 95" inside height. Has title

365
Hydraulic Tension System for Resaw
Includes reservoir, pump and hoses

354
Mobile Office Trailer
VIN: AI19015A, Pulls with 2 5/16" ball, 8' x 32' x 7' high, single axle, has main door and overhead door, includes all contents. Has title

376
Armstrong Stretcher Roll
SN: 16674, Model: 3-60-C, electric drive

355
Dump Bed
8' x 16' x 54" deep, includes main cylinder for dump

356
Shop-Built Boom Crane Gooseneck Trailer*
VIN: WV-152-285, 7'6" x 24' overall, dual tire axle with LT 215/85R16 tires, toolboxes on sides, Versalift crane - 300 lb capacity, hydraulic controls (model: V025-GS, SN: J19111), 25" diameter x 44" deep fiberglass bucket

356A
Aluminum Dump Bed
8' x 18' with 64" sides, in good condition, no cylinder included

357
Flatbed Trailer
285/75R 24.5 tires, 8' x 43', wooden deck, in rough condition, VIN tag is missing, includes tie down straps. No title, bill of sale only

374
John Deere X595 Riding Lawn Mower
60" mowing deck, no issues, John Deere diesel engine (SN: CH3010D110661), hour meter is fogged over, hydrostatic drive

375
Newman G-200 Knife Grinder
Electric drive, 20" max knife length

377
Welding Rods
Antique fridge filled with welding rods and parts

378
Chipper knives
100 or more knives, counter knives, holders, parts

383
Steel Cables
4 pieces with loops on each end

379
Newman G-132 Knife Grinder
32" knife holding bed, 7' long overall, electric drive

380
Yates American Planer knives
2" x 15" x 5/32", 30-40 sets, approx. half are in like new condition

381
Circle Saw Wrenches
For setting teeth

386
Cutting Torch Set
Includes cart, tanks, leads, gauges, and torch

382
Steel Sawhorses
4' x 30" tall, 32" wide at base

384
56" Circle Saw
B8 style, 2" arbor

385
56" Circle Saw
B8 style, 2" arbor, damaged

387
Assorted Saw Blades
(10) 26", (4) 30",(1) 26", (13) 18-20", some broken, need sharpened

388
Edger Blades
(12) 20", (7) 18", 4" and 1 1/2" arbors, need sharpened

391
Loader Rims
8 lug, 14" x 27.5"

389
22" Blades
23 total, most in good condition, will need sharpened

390
Tire Chains
14" wide

392
Husk Wrenches
Includes all wrenches hanging from wall as pictured

394
Pacific Saw and Knife Circle Saw Grinder
64" max saw size, 110 plug in, shavings bag collector, 10" grinding wheel

393
Shelf with Parts
16" x 4' x 4' tall

395
Cutting Torch Parts
2 torches, goggles, 1 new tip, used tips, tip cleaners, 2 ignitors

396
2 Levels
(1) 48", (1) 78"

397
Steel Table with Tools
38" x 78" x 37" tall, assorted hand tools, files, wrenches, sockets, assorted, fasteners

398
Debarker Parts
(2) heads, no teeth, 10 groove 12" pulley on shaft

399
Floor Jack
SN: 548185, 8000 lbs capacity, condition unknown

400
Bablor 6" Bench Grinder
SN: F588, 110 plug in, 3600 rpm,

401
Oregon Chainsaw Sharpener
SN: 265791, Model: 511A, 110 plug in

402
Steel Work Bench with Contents
30" x 14' x 38" tall, includes all contents of bench and contents on wall and shelf above bench, electric motors, bearings, cylinders, hand tools, air impact

403
5" Wilton Bench Vise
18" long when closed

404
Delta Drill Press
SN: 5752, 110 plug in, 12" x 12" tabletop

408
Steel Cabinet
Includes all contents, 5' x 42" x 78" tall, hand tools, chain parts, electric drill, hydraulic parts, sprocket

405
Anvil
4.5" x 14" flat surface

409
Steel shelf with All Content Bearings
3' x 15' x 6' tall, includes all items on and under shelf, electric motors, cylinders, pulleys, hydraulic pumps, and motors

406
60" Pipe Wrench

410
Pallet of Chain
20 rolls of H78 chain, 10' per roll, 10' of brand new roller chain

407
36" Pipe Wrench

411
Fire Hoses
6 rolls of 3" hose

412
Electric Wire
Includes all assorted wire as pictured

413
Water Pump
Honda GX120 gas motor, 2" hose with filter, includes Ross valve

414
Air Compressor Frame
Includes tanks, frame, and pulley, no motor or compressor

416
Shelf
13" x 30" x 66" tall

417
Assorted Saw Blades
14" to 20", 7 new 20" edger blades

418
Fastener Organizer
9" x 34" x 39" tall, includes all parts in organizer and new bearings beside shelf

419
Hydraulic Hoses
32" x 4' x 2' deep box, lots of new hydraulic hoses

415
Portable Hammering Bench
10" x 5' x 35" tall

420
Shelf with Contents
Lights, electric motor, welding mask, saw blades, assorted parts

421
Troy-Bilt Garden Tiller
Comes with extra 5 1/2 hp Honda motor, powered by 11 hp Briggs and Stratton motor, condition unknown

422
Trash Pump
1 1/2" Generae pump, CW15K Water pump, 79 cc motor, includes feed hose and fire hose, also includes 3 pt. hitch frame

423
3 Part Washers
110 V plug in

424
7500 Watt Generator
420 cc motor, Model: SP-GG750E, Homelite 8" blower with 3.5 hp gas motor

425
Ceiling Lights and Bulbs

426
Spools of Rope
(1) 17" x 17" spool with 3/4" rope, (2) 2' x 2' spools with 3/4" rope

427
Pallet of Misc. Hardware*
(2) 3 ton jack-stands, screws, nails, bolts, door hardware, castors

428
Pallet of Misc. Lighting*
Fixtures and parts

429
Pallet of Tools *
2000 psi-4 hp pressure washer, 2 1/2" - 3 1/2" fire hoses, Craftsman 21cc-7" edger, 5 hp, 125 max psi electric air compressor

430
Pallet of Misc. Hardware*
Plumbing fittings, thermal blankets, tie down tools, washing and detailing supplies

431
Pallet of Lights*
(6) Ceiling lights

432
Pallet of Misc. Hardware*
Springs, detailing supplies, 220V, make to female adapters, assorted trailer lights

433
Pallet of Misc. Hardware*
Insect traps, cleaning supplies, plumbing parts, spray paint

434
Pallet of Misc. Hardware*
Tail lights, tire covers, spray paint, insect screens, auto parts and fluids

435
Pallet of Misc. Hardware*
Plastic mats, clamps

436
Crate of Assorted Belts*

437
Crate of Assorted Belts*

438
Pallet of Misc. Hardware*
Clamps, pulleys, wire brushes, home security kits, paint roller, mesh aluminum, car grills, locks, sink fittings, fasteners, gate latches

439
Steel Cutting Saw and Plate Compactor*
Wacker 135 lb upright plate compactor, Stow True 14" metal cutting chop saw

440
Adjustable Skate Rolls*
2' x 7', extendable, removable legs

454
Assorted Rough Cut Lumber
3/4 - 3" thick, 4" - 20" wide, 6' - 20' long, includes all lumber as pictured, air dried

441
Adjustable Skate Rolls*
2' x 7', extendable, removable legs

442
Pallet of Misc. Hardware*
40" - 48" pipe clamps, wall heater, window AC unit, 110 V work lights, pipe threader fittings

443
Tank Cart and Sander*
28" x 5' cart-holds up to 24" diameter tanks, Clarke Super 7" sander-110 plug in, includes case

444
Pallet of Misc. Hardware*
Sink and plumbing parts, steel wire rope, paint sprayer, hand tools, shower and tub parts, toilet parts, assorted fasteners, door knobs and locks, automotive fuses

445
Pallet of Misc. Hardware*
Shower and tub parts, toilet parts, assorted fasteners, door knobs and locks, automotive fuses

446
Bolt Organizers*
(14) 13" x 16" x 13" organizers, (5) 10" x 13" x 7" organizers, all loaded with assorted fasteners

447
11R22.5 Tires*
(5) tires, mounted on steel rim, (4) in good condition, (1) almost gone

448
Fuel Jugs and Carts*
(7) 5 gallon jugs, (1) 2.5 gallon jug, (1) 2 gallon jug, assorted shop carts

449
Scaffolding*
Includes castors, supports, platform sections, and legs

449A
Hand Tools*
Assorted shovels, concrete tools, post hole digger, chisels, pry bars

449B
Assorted Threaded Steal Rods*
6' long sections, 3/16" to 1/2" rods

449C
Sumner Manual Pallet Truck*
650 lb capacity, 22" x 28" forks, hand crank, has stabilizers

449D
Sumner Manual Pallet Truck*
Model: 720, SN: 720-5110, 750 lb capacity, 22 x 26" forks, needs repair

450
Assorted Rough Cut Lumber
3/4 - 3" thick, 4" - 20" wide, 6' - 20' long, includes all lumber as pictured, air dryed

450A
Rough Cut Lumber*
Approx. 6800 BF, 6-12" wide x 16' long, 1 3/4" thick

450B
Rough Cut Lumber*
Approx. 4,600 BF, 6-12" wide x 16' long x 1 3/4" thick

450C
Rough Cut Lumber*
7' long, 5/8" thick, 5-11" wide, approx. 1600 BF

450D
Rough Cut Lumber*
6-12" wide x 10' long x 1 3/4" thick, approx. 2100 BF

450E
Rough Cut Lumber*
6-12" wide x 1 3/4" thick x 10' long, approx. 3000 BF

450F
Rough Cut Lumber*
6-12" wide x 10' long x 1 1/2"-2" thick, approx. 3000 BF

450G
Rough Cut Lumber*
6-12" wide x 10' long x 1 1/2"-2" thick, approx. 3000 BF

450H
Rough Cut Lumber*
6-12" wide x 10' long x 1 1/2"-2" thick, approx. 4600 BF

451
Assorted Rough Cut Lumber
3/4 - 3" thick, 4" - 20" wide, 6' - 20' long, includes all lumber as pictured, air dryed

452
Assorted Rough Cut Lumber
3/4 - 3" thick, 4" - 20" wide, 6' - 20' long, includes all lumber as pictured, air dryed

453
Assorted Rough Cut Lumber
3/4 - 3" thick, 4" - 20" wide, 6' - 20' long, includes all lumber as pictured, air dryed

455
Pallet of Metal Trim
6" wide x 10' long metal ridge cap, approx. 70 pieces

455A
Pallet of Auto Parts
Muffler, fluids, jack stands, door hinges

455B
Pallet of Misc.
Microwave, table saw, RV accessories, work lights, hood scoops

455C
Lawn Mower Tires
(1) 205/65-10 with rim, (1) AT24x8-11, (1) AT24x10-11, (1) lo-lug 16 1/2" rim, (1) 6 lug 17 1/2" rim

456
Pallet of Soffit and Gutters
Vented vinyl soffit, soffit trim, vinyl gutters and fittings

457
Pallet of Metal Trim
Assorted metal trim

458
Pallet of Metal Trim
Vented soffit, ridge trim, F + J channel, fascia

459
Pallet of Vinyl Gutters and Trim
Vented soffit, J channel, gutters and fittings

460
Pallet of Metal Gutter and Trim
Vented soffit, corner roof trim, fascia, J channel, gutters

461
Pallet of Siding and Trim
Vinyl siding and soffit, metal corners and drip edge, Fascia

462
Pallet of RV Parts
TV antenna, RV jacks, sway control bar fuel tank

463
ATV Tops
New 11 pieces

464
Pallet of Misc.
Coolers, vacuum, wire, foam rolls, pipe threader stand, Troy-Bilt sidewalk edger

465
Utility Cart
3/4 ton wheel dolly

466
Shelves and Peg Board
(1) 30 x 36 x 24" tall, (1) 30 x 48 x 22" tall, 3' x 4' sections of peg board, approx. 40 pieces

467
Pallet of Tools
60 gallon air tank, hanging lights, screws, PVC pipe heater,

468
Pallet of Tools
Banding cart, chicken wire, wire shelf, toolbox

469
Pallet of Misc.
Cleaning supplies, light bulbs, exhaust parts

470
Pallet of Misc.
ATV oil, welding leads, chalk for chalk lines, misc. hardware, mixing oil, mirror parts

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend







Sponsored Links

Formerly Braxton Lumber Co.

Bright Star Realty and Auctions, INC

Bright Star Realty and Auctions, INC


Contact: Loren Beachy
Phone: 574-825-0704
Sale Location
5909 Gauley Turnpike
Heaters, WV 26627
Sale Dates and Times
Thursday Jun 8, 2023 Completed
Sale Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
  2. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
  3. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:
“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
  2. Governing Law.
    1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
  3. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
  4. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  5. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
  6. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
  7. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
  8. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
    2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
    3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
    4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
    5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
    6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
    7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
    8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
    9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
    10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
    11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
    12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
    13. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
  9. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
  10. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
  11. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
  12. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
  13. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
  14. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
  15. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
  16. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
  17. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
  18. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  19. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
  20. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
  21. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
  22. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
  23. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
  24. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
  25. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
  26. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
  27. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
  28. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
  29. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
  30. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
  31. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
  32. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
  33. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
  34. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
  35. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
  36. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
  37. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
  38. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Details
Sawmill Liquidation and Heavy Equipment
 

00
Information Lot
Sawmill Liquidation and heavy equipment

HIGHLIGHT PIECES: Wood-Mizer LT-70 sawmill, numerous farm tractors, wheel loaders, trailers, and more.

AUCTION/SELLER STORY: After 50 years in the sawmill industry, Braxton Lumber will sell its complete sawmill operation at live, onsite, no-reserve auction on June 8, 2023, at 9 am. The auction offers a unique opportunity to acquire high-quality, well-maintained equipment, including "like new" Wood-Mizer equipment, top-of-the-line McDonough equipment, and more. Bright Star Auctions is honored to conduct this event, providing a fair and transparent bidding process. Register in advance to bid online or show up onsite the day of the auction to take possession of this equipment and continue the legacy of Braxton Lumber in your own way.

01
Preview Information
June 5th - 7th from 8 am to 4 pm. Contact Jonathon to make an appointment 574-821-7530

02
Loadout Information
Free loading will be available Friday June 9th from 7-5 and Saturday June 10th from 7-noon. After that it will be by appointment only and at the buyers expense.
RIGGERS: Tenex Industrial. Joe Fisher is the contact 717-314-7317

03
Payment Information
Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction.
 

92
CAT 555D Wheel Skidder 1:50 Scale Replica - Die Cast Metal
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s
 

92
CAT 555D Wheel Skidder 1:50 Scale Replica - Die Cast Metal
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s
 

98
Heavy Equipment Key Set 36 Keys
Shipping available for $20

98
Heavy Equipment Key Set 36 Keys
Shipping available for $20

99
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

100
4 Strand Log Deck with Stop'N'Load
(1st lot of an entirety) Electric drive, hydraulic cylinder on loading arm, 14'6" x 27', includes steel log bumpers on sides as marked, includes structural steel to ground and catwalk around sides.

101
Rosserhead Debarker
(Part of entirety) 40 hp electric drive on cutting head, cutting head swivels, air cylinders on truck lift, 3" x 26" bull wheels, hydraulic cylinders on log kickers, hydraulic drive on bull wheels, 9' 6" x 26' 6" overall, 6' x 7' x 8' tall, cab with all controls included.

102
Incline Paddle Chain Waste Conveyor
(Part of entirety) 2 1/2" x 14 1/2" paddles, electric drive located under debarker, includes slide pan, 14" sides, 17" pan, 3' x 75' overall

103
10 hp Hydraulic Pack
(Part of entirety) 2' x 3' x 12" tank, pump, valves, includes all hydraulic lines and hoses to equipment

104
Debarker Entirety of Lots 100-103
With 10% raise.

105
4 Strand Log Deck with Stop'N'Load
Main deck is 13' x 26', includes 3' x 13' 6" nose skids, electric drive with Tulsa gearbox, includes steel tubing as marked

106
64" Bar Type Log Turner
Hydraulic drive, hydraulic cylinder, 28" x 6' frame

107
HMC AC44 3 HB Carriage
(1st of an entirety) SN: AC44-160, includes pantograph, air dogs, 5/8" dogs, tong dog, 1st HB to 2nd HB-66", 2nd HB to 3rd HB-55", 8' x 17', 4 axle, air over 110 setworks, controls in cab included

108
Carriage Truck
(Part of entirety) 64" center to center, 68' long, includes structural steel to ground, includes pulleys mounted in truck

109
Tyrone Berry Carriage Feed and Drive
(Part of entirety) SN: A2850, Model: SMA-225, Spool of 3/4" steel cable, gearbox, hydraulic pumps, 1800 rpm, 1500 psi, 60 hp electric motor, 26 x 32 x 16" tank, includes all hydraulic lines to equipment

110
Slab Dump Conveyor
(Part of entirety) Air cylinder for dump, electric drive, 28" belt, 4' x 15' overall, includes air valve

111
40 Hp Hydraulic Pack
(Part of entirety) 3' x 3' x 30" tank, includes pumps, valve station and all hydraulic lines to equipment

111A
Electric for Carriage Entirety
(Part of an entirety) Motor starters for carriage, carriage drive, and hydraulic pack

112
Sawyer's Cab
(Part of entirety) 55" x 100" x 7' tall, has AC unit, is insulated, does not include any controls, controls go to equipment they were used on

113
HMC AC44 Carriage Entirety of Lots 107-112
With 10% raise.

113A
Jacobson AC/DC Carriage Drive
Setworks box with 250A, 600 VAC 460V transformer, 125 hp electric motor with blower motor, includes conduit from boxes to equipment

114
McDonough 6' Head Rig
SN: 72-MA-344, 11 1/2" x 6' band wheels, 1" mead on top wheel, 9" band, 28" x 5' off-bear slat conveyor with electric drive, lineal positional cylinder, air strain, does not include main electric drive

115
Electric Motor
444T frame, 150 hp, 1770 rpm

115A
VMX Solid State Soft Starter
Model: VMX-361-BP, 126 hp at 208 V, 126 hp at 240 V, 300 hp at 480 V, 360 hp at 800 V

116
Laser System for Band Mill
24' long, includes steel supports

117
Belt Conveyor
16" belt, 6" sides, 20" x 30', electric drive, includes slide pan

118
Paddle Chain Waste Conveyor
Electric drive, 14 1/2" paddles, 2' x 100' long overall, includes structural steel to ground

119
Roll Case
12" x 29.5" rolls, 24" spacing, 44" x 65" long, 16 spiral rolls, 13 regular rolls, electric drive, includes slide ramp for unloading

120
4 Strand Transfer Deck
Missing chain on 2 strands, H78 chain, electric drive, air cylinder on cant loading arm 12.6" x 21'. Includes slide ramp to rails

121
McDonough 6' Line Bar Resaw
(1st of entirety lot) SN: 72-MA-398, Air strain, missing lineal positioning cylinder, 11" x 72" band wheels, 1" meat on top wheel, 34" x 11'6" feed rolls, 3 power feed roll arms, hydraulic on all feeds, hydraulic cylinders, does not include main electric drive, SN on feeds rolls LBR-43, there are no setworks or controls included with this system

122
Electric Motor
(Part of entirety) 150 hp, 1780 rpm, 460 V, 444T frame

123
Infeed Roll Case
(Part of entirety) 8" x 36" rolls, 22"-42" spacing, 3-32" 2 way transfers, hydraulic drive, 4' x 18'

124
Outfeed Roll Case
(Part of entirety) 8.5" x 43" rolls, 24" spacing, hydraulic cylinder for width adjustment, 5' x 28', hydraulic drive

125
4 Strand Transfer Deck
(Part of entirety) 14' 6" x 6', 4-54" pop-up arms, does not include shaft on end against 180 degree deck, hydraulic drive

126
McDonough 4 Strand 180 Degree Transfer Deck
(Part of entirety) 12.6" wide, 23' inside to inside, hydraulic drive, includes support steel to ground

127
4 Strand Transfer Deck
(Part of entirety) Does not include shaft on end against 180 degree deck, hydraulic drive, cant loading arm

127A
Operators Cab
(Part of an entirety) Includes control panels for run around system, 6' x 8' x 7' tall, needs glass replaced

128
Hydraulic Unit
(Part of entirety) (1) 20 hp motor, includes cooling unit and electrical panel, (1) 50 hp motor, includes all pumps and valve stations, 2' x 6' x 28" tank, includes all hydraulic lines to equipment, includes stand

129
5 Hp Hydraulic Pack
(Part of entirety) 14" x 24" x 20" tank, includes all hydraulic lines to equipment

130
Entirety of lots 121-129
With 10% raise. There are no setworks or controls included with this system

131
Belt Conveyor
Electric drive, includes cut off, 9" belt, 36' long

132
Belt Conveyor
Electric drive, 29" belt, 56" x 25'

133
4 Strand Transfer Deck
Electric drive, 12' 6" x 8' 6", (4) 4' pop-up arms

134
4 Strand Transfer Deck
10' 6" x 10', 3' of transfer is pop-up with air cylinder, electric drive

135
Corley Gang Edger
SN: E-648-028, 6" x 48" capacity, 54" x 9' 6" infeed rolls, laser light, hydraulic controls, include 5 hp hydraulic pack, 10" x 25" x 24" tank, 2 blades, 1 moveable, 75 hp electric motor, includes electrical and control box, twin tailing belt outfeed, 6" x 20' belts

136
Belt Conveyor
Electric drive, 30" belt, 4' x 25'

137
Cant Slide Rack
13' x 14' decline with 6' flat section

138
4 Strand Transfer Deck
Electric drive, C55D rooftop chain, 10' x 42', includes 9'6" x 38' steel stacking rack

139
5 Strand Transfer Deck with Rolls
12' 6" x 15', does not include shaft on end against trim saw, (5) 6" x 42" rolls, roller chain with pegs, strands are offset

140
Hemco 10 Head Drop Saw Trimmer
7.5 hp motor on each head, 22" saws, 2 heads are not setup, 20' capacity, includes 6' x 19'6" slide pan, includes control panel, 7' x 22' overall, 18" x 20' waste conveyor

141
4 Strand HMC Green Chain
SN: 872-77, Model: LT24, 10'6" x 98', electric drive

142
Horizontal Air Tank
20" x 5'

143
Horizontal Air Tank
2' x 66"

144
Air Compressor
No drive, 2' x 66"

145
Sullair LS160 Air Compressor
SN: 003-133002, 75 hp electric motor; includes air filter, exhaust pipe, and air line to equipment

146
Sullair LS12 Air Compressor
SN: 003-106899, meter reads: 5,190 hours, 60 hp electric motor; includes air filter, exhaust pipe, and air line to equipment

147
Dust Conveyor Paddle Chain
16" x 90' x 14 1/2" paddles, electric drive

148
Belt Conveyor
26" belt 6" side, 32" x 95', electric drive

149
Belt Conveyor
6" belt, 6" side, 18" x 60', electric drive

150
Fulghum 60" Chipper
(1st of an entirety) 4 knives, no drive

151
Westinghouse Electric Motor
(Part of an entirety) 150 hp 1775 rpm, 445T Frame

152
Westinghouse Soft Start
(Part of an entirety) Model: VMX series

153
Fulghum Shaker Screen
(Part of an entirety) Model: 8X8 screen, SN: FIR-953, includes 6' cyclone with pipe to chipper

154
Phelps Fan Chip Blower
(Part of an entirety) 48" blower with 3 truck loading chutes

155
28" Blower
(Part of an entirety) no motor

156
Chipper Entirety of Lots 150-155
With 10% raise.

157
Fulghum Vibrating Conveyor
35' long, 18" pan, 8" sides, electric drive, chipper feed chute

158
Chain Conveyor
18" x 54', 14" paddles, 32" slide pan, 6" sides, electric drive

159
Chain Conveyor
26' long, 10" sides, 18" wide, electric drive

160
Belt Conveyor
56' long, 30" wide, 28" belt, 6" sides, electric drive

161
Hydraulic Pack
Electric drive, fire damage

162
Clarksville Machinery Rip Saw
SN: R-71, Electric drive, manual width adjustment, 7" x 64" Skate roll outfeed, (2) 6" x 6' chain feeds, no blade, 24" width capacity.

163
Lincoln Electric Motor
150 hp, 1780 rpm, 444T frame, 460 V, 3 3/8" shaft

164
Gator Fast Line DBL End Trim Saw
Electric drive, 18" blades, 6' width capacity, both heads are moveable, includes electrical disconnect, 7' x 9' overall, manual head movement.

165
2 Blade Scragg Edger
20 hp electric motor on each head, no blades included, fits up to 20" blades, 12' 1 strand chain feed, 5' x 12' overall.

167
Belt Conveyor
23" belt, 32" x 31", electric drive.

165A
Square D Model 5 Motor Control Center*
600 amps horizontal, 300 amps vertical, 8 vertical sections, does not include any conduit

165B
Conduit*
Includes all conduit from Lot 165A to equipment, does not include any 110V conduit or any conduit or wiring for the building

166
Yates 612 4 Head Planer/Molder
SN: B29560, 3 upright heads, 8" x 12" capacity, electric drive, includes catwalk around plainer, includes control stand, does not include any dust pipe.

168
2-Strand Log Deck
(1st of an entirety) 80" x 17'6", has Tulsa gearbox but no motor, includes support steel to ground

169
Frick 3 HB Handset Carriage and Track
(Part of an entirety) 36' of track, 34" center to center, 1/4" cable, includes pulleys and cable drum, 52" x 15' carriage wooden frame on track and carriage, 1st HB to 2nd HB is 64", 2nd HB to 3rd HB is 48"

170
60" Frick Husk
(Part of an entirety) 56" saw IX7P style, 40 x 88" wooden frame, 22" x 80" off bear, 2 3/16 x 64 mandrel shaft

171
6 Cylinder Detroit Diesel Power Unit
(Part of an entirety) Includes exhaust pipe, radiator and pulley mounted to clutch

171A
Building and Crib Blocks
(Part of an entirety) Includes all wooden blocks and beams under lots 168-171, includes building

172
Frick Circle Mill Entirety of Lots 168-171A
With 10% raise.

175
Armstrong Band Stretcher Roll
SN: 46267, Model: 5-14 includes all rolls, 12" x 48" x 4" hammering block

176
Armstrong #4 RH Band Saw Sharpener
SN: 16182, includes all swedges as pictured, includes all clamps and stands as marked, Clamp model 58B

177
Welding Table with Grinding Wheels
24" x 57" x 42" tall table mounted on Eastors, Armstrong #16 welding clamp mounted on table, approx. (95) 12" x 7/8" x 1 1/4 grinding wheels, used

178
Carriage Cable
(2) partial rolls of coated 3/4" steel cable, length unknown

179
McDonough Knife Grinder
SN: BDM-673, 4" bench vise mounted on stand, includes all tools plus parts on stand and in drawers

182
Lincoln SP-135 Plus Wire Welder
Code: 10868, SN: U1010510952, 115 V single phase input, includes gas tank, mask, and cart

180
Armstrong #14 Band Shear
Mounted on castors, manually operated

183
Cutting Torch Set
Includes oxygen and Acetylene tanks, gauges, leads, and mask

181
Bands
(12) 12" bands, fit lot # 114 or 121, includes partial rolls of edge guard, (175) sharpening room, (421) smalls

184
Space Heaters
50000 BTU Mr. Heater-110V plus fuel, 45000 BTU Protemp-110V plus fuel, 20" floor fan-110V

185
Hand Tools
36" cant hook, scoop shovel, 48" crow bar, DeWalt 7" corded grinder with wire brush heads

186
4-Strand Log Deck with Stop'n'Load
10'6" x 30', includes 10' x 12' steel plate section and catwalk on side of deck, hydraulic cylinder on arm, has Tulsa gearbox but no drive, includes support steel to ground

187
4-Strand Log Deck with Stop'n'Load
Hydraulic drive with Tulsa gearbox, 10'6" x 16'6", includes support steel to ground, no cylinder on loading arm

188
Reckart 36" Chain Type Log Turner and Nose Skids
(1st of an entirety) No drive or cylinder, 42' x 10'6" section of nose skids

189
Carriage Track and Feed
(Part of an entirety) Drum of 3/4" cable and pulleys, 45" center to center of track, 51' long, includes support steel to ground

190
56" Husk
(Part of an entirety) Includes 56" F8 style saw-not installed, 22" x 64" off bear with 13" belt, runs off mandrel, 2 15/16 x 5" mandrel shaft, includes hydraulic pump and lines hooked to mandrel, 4' x 4' x 6' tall cab included.

191
Balder Electric Motor
(Part of an entirety) 100 hp, 1760 rpm, 405T frame, 230/460V

192
Ajax Motor Starter
(Part of an entirety) 100 hp, 3 ph, 460V

193
2 Blade Vertical Edger
(Part of an entirety) 30 hp electric motor, (2) 20" blades, both moveable, 6 1/2 x 36" capacity, hydraulic cylinders for blade movement

194
Entirety of Lots 188-193
With 10% raise.

195
Belt Conveyor
21 1/2" belt, 30" pan, 3' x 58', electric drive, includes support steel to ground

196
Belt Conveyor
Electric drive, 8" belt, 3 1/2" sides, 14" x 10', located under edger

197
Belt Conveyor
Electric drive, no belt, 8 1/2" pan, 7" sides, 20" x 20"

198
4 Strand Green Chain
C55B rooftop chain, 13' x 25'6", 33" belt between 2 strands, electric drive

199
Double End Trim Saw
2 moveable heads, electric drive, includes control panel, 30" saws, 8' x 20' overall, 18' max board length

200
Circle Mill Building
Includes all steel posts, roof metal, all wall and rafter materials, dues not include small building with all electrical, includes all catwalk and support steel, not lotted otherwise, main part is 43' x 120", 28' x 90' add-on for green chain, 28 x 30' storage room, 13-13'6" wall height

200A
Break Room Building
16 x 24' main building, 10 x 16' front porch addition, 8' walls mounted on blocks, includes all chairs, benches, sinks, etc. in building

200B
Single Wide Trailer
10' x 16' deck, 13' x 53' main trailer, 8 x 12 front porch, 2 bed 1 bath, includes furniture and appliances

201
Fulghum 48" 6 Knife Chipper
(1st of an entirety) 100 hp electric motor

202
Fulghum Shaker Screen, and Cyclone
(Part of an entirety) 5' x 5' screen, 3' x 3' cyclone including chip pipe from blower to cyclone

203
24" Chip Blower
(Part of an entirety) Needs repair, no drive, includes dual chip chute, 10" x 12" top feed

204
Fulghum Chip Pack Entirety of Lots 201-203
With 10% raise.

205
Vibrating Conveyor
2' x 22', includes chipper infeed section, 19" pan 4" sides, no drive

206
Belt Conveyor
No belt, no drive, 12" x 27' overall, 7" pan and sides

207
Double Head Notcher
9" heads, 6' lift capacity, electric drive, 8'6" x 10' overall

208
Maltros Belt Conveyor
SN: MO923, 50" belt, 64" x 10'

209
Roll Case
20" x 8' air cylinder, 4" x 12" rolls, 12" spacing

210
Double End Trim Saw
No blades, one moveable head, 7' width capacity, electric drive, 6' x 8'

211
Kenwell Jackson Chamfering Machine
Model: 3000E, SN: 791697, 480 V, electric drive, 32" x 7'

212
Bronco Pallet Stacker
Model: 238, SN: 200, 40 x 55 max pallet size, air cylinders, 5' x 5' incline feed, no drive

213
Froedge Deduster
Model: 450 LBD, SN: 23719L, 8" width capacity, 4 1/2" height capacity, electric drive

214
Cornell Slab Saw
24" blade electric drive, 15 x 26 x 13" hydraulic tank, includes control panel hydraulic cylinder on head

215
Single Head Notcher
9" head electric drive 7" width capacity, 42" x 64" overall.

216
Roll Case with Pop Up Transfer
Electric drive, air cylinders on pop-up, 3 1/2 x 25" rolls, 18-24" spacing, 3 strand 5' x 14' pop-up skate rolls, 64" x 16'6"

217
Tower Edger
Set up to run off PTO, 4 x 36" capacity, (2) 14" moveable blades, 3' x 7' infeed dead rolls, 40" x 7' outfeed landing table

218
Hobart Mega-Arc Welder
SN tag is missing, powered by a Ford 4 cylinder gas engine (Model: LSG-4231-6005-A, SN: 17565-T-21-TH), mounted on 4 x 8 x 5' tall frame, has rack for gas/oxygen tanks

218A
Swingine Arm Chopsaw
No drive, includes jack shaft for PTO, 26" blade, 16" x 5' skate roll feed, 8' x 10' x 9'6" overall with frame, manual pull on saw

219
10 Head Drop Trim Saw
No chain on feed, no drives included, set up for electric, no saws installed, fits up to 26" blades, 9'6" x 26' overall, 20' max board length.

220
Steel I Beams
(4) 7" x 16" x 20' long, 1/2" steel, 15 pieces

290
2019 Wood-Mizer LT70 Super Hydraulic Wide Throat Portable Bandmill
(1st of an entirety) VIN: 456D72415KNGA5224, 457 original hours! Powered by a Yanmar 4TNV86 diesel motor rated at 37-56 kw, 64" wide loading arm, debarker mounted on mill, 8-14.5 tires, 2 fenders included, includes extra debarker, extra support legs, and more misc. extra parts, 30 x 68" landing table, includes Wood-Mizer automated setworks, pulls with 2 5/16" ball. Runs flawlessly.

290A
Wood-Mizer Bed Extension
(Part of an entirety) Fits all Wood-Mizers LT28 and up, 3' x 6', Revision Level-A2.02

291
Wood-Mizer Incline Belt Conveyor
(Part of an entirety) SN: 1C5-S06190796A5.02, Electric drive, 24" cleated belt, 8" flared sides, includes control box, and box of mounting bolts, adjustable legs, 42" x 19'6", 208V, single ph.

292
Bands
(Part of an entirety) All Sharpened, (20) 1 1/2", (25) 2", approx. 45 total blades

293
Wood-Mizer BMT 250 Band Sharpener
(Part of an entirety) SN: BMS/337/2019, 110 V plug in, includes control panel

294
Wood-Mizer BMT 200/250 Band Tooth Setter
(Part of an entirety) 115/230 V, includes control panel, in good condition.

295
Wood-Mizer 2 Strand Log Deck with Stop'n'Load
(Part of an entirety) 64" x 14' plus 4' loading arm, hydraulic drive, hydraulic cylinder on loading arm, set up to run off hydraulic hookups on lot 290

296
Wood-Mizer LT70 Entirety of Lots 290-295
With 10% raise.

297
2019 Wood-Mizer EG 200 Twin Blade Portable Edger
(Part of an entirety) VIN: 456A11417KNCB2274, Meter reads: 1443 original hours, Kohler 26.5 hp gas motor, (2) 14" blades - 1 moveable, 26' x 77" skate roll infeed, 3 x 24" infeed capacity, 28" x 10' skate roll outfeed bolt on, 215/75R14 tires, pulls with 2" ball manual blade movement, in great condition.

298
Skate Rolls
(Part of an entirety) (1) 12" x 8' x 38" tall - 2 x 12" rolls, 13" spacing, (1) 2' x 5' - 2 x 20 1/2" rolls, 3" spacing

320
LB Performance G700 Road Grader
SN: 104416, Cummins Diesel Engine (SN: 73630217), Meter reads: 254 hours, 15-19.5 tires, fully enclosed cab with heat/AC, hand controls, runs and operates great.

299
Wood-Mizer Master Entirety of Lots 290-298
With 10% raise.

300
2001 Bobcat 873 Turbo Skid Steer
SN: 514149041
Meter reads: 2,677 hours
Engine: Deutz BF4M Diesel, rated at 53.6 KW
Fuel type: Diesel
ROPS: Fully enclosed cab, needs new door
2 Speed: Yes
Highflow: Yes
Lift capacity: 2,400 lbs
Attachments: 28" x 78" quick attach bucket
A/C: Yes
Heater: Yes

Features and Notes: 12/16.5 tires, in good condition, hand controls.

301
Kubota RTV X900 Utility Vehicle
PIN: A5KB2FDBHKG053555, SN: 53555, 767 hours, 40' x 5' dump bed, rebuilt rear axle 5/23, diesel engine, runs great with no issues. Has title

302
2012 John Deere 855D Gator
VIN: 1M0855DSECM044487, 999 hours, has 4x4, 44" x 50" dump bed, 1000 lb max capacity for bed, John Deere 3TNV70 motor engine (SN: CH3009D240310), runs and drives good manual dump. Has title.

303
DLA 1979 Forklift
Model: ACP-60-B-PS, SN: 110535, meter reads 474 hours, 6000 lb capacity, 3-stage, 80" tall mast, no sideshift, gas powered, 7.0 x 15-5.5 solid tires on front, 7.5 x 10-5 solid tires on rear, 5 x 40" forks, not running, condition unknown.

304
2005 CAT 924G Wheel Loader
SN: 9SW01004
Meter reads: 27,472 hours
Engine: CAT 356 (SN: 8XJ01383)
Fuel type: Diesel
ROPS: Fully enclosed cab
3rd Valve: Yes
Center to center of pins: 19.5"
Tire Size: 20.5R25
Attachments: Rockland Grapple forks, 7" x 44" forks, 70" width
Heater: Yes
A/C: Yes
Quick Attach: No

Runs and operates like it should. 
 

305
2016 Komatsu WA 270-7 Wheel Loader
Meter reads 8974 hours, Komatsu diesel engine rated at 154 hp, 20.5R245 tires, has quick attach system, includes JRB forks (64" wide, 6 x 54" forks), bucket not included, fully enclosed cab with heat/AC, radio, digital display, and backup camera, SN: begins with 8110 - rest of the tag is missing. Good running machine

305A
WB Quick Attach Loader Bucket
SN: 24984512, 3 1/2 cubic yard capacity, 3' x 100"

305B
New! Wheel Loader Tire
20.5R25, will fit lot 304 and 305

305C
Craig Wheel Loader Forks*
Pin Through style, SN: 88860, fits Komatsu WA120

305D
Craig Wheel Loader Jib Crane*
SN: 88911, Pin through style, 6-10' long,

309
1988 CAT 963 Track Loader
SN: 21Z01777, CAT 3304 Diesel engine (SN: 12Z24950), meter reads: 11745 hours, hand and foot controls, 22" tracks, 32" x 8' tooth bucket. Good running condition. 

310
2004 John Deere 435 Series II Knuckleboom
SN: WC0435X012216
Meter reads: 6,526 hours
Engine: John Deere 6068 Diesel
Fuel type: Diesel
Continuous Grapple: Yes
Trailer: 2004 Pitts (VIN: 5JYKB39264P041272)
Delimber: None
Bucksaw Hookups: Yes
A/C: Yes
Heater: Yes

Features and Notes: Rotobec grapple, Model: 6606HD, SN: 1250001R2-538783, 6' max width, Fully enclosed cab, Pilot joystick controls, 11R 22.5 tires. Runs great, no issues. Trailer has title.

311
1970 Barko 160A Knuckleboom
SN: 15392
Meter reads: 6,565 hours
Engine: Detroit Diesel 351
Fuel type: Diesel
Continuous Grapple: Yes, 64" max width
Trailer: No
Delimber: No
Bucksaw Hookups: No
A/C: No
Heater: No

Features and Notes: Pilot joystick controls, self-propelled. Overall dimension 24' long x 8' wide x 15' tall, 17.5-25 tires, starts and runs strong, operates as it should. Trailer does not have a title, bill of sale only

316
CAT D6H Series II Crawler Dozer
Meter reads: 9,877 hours, hand and foot controls, 36" tracks, CAT diesel engine, 12'6" 4 way blade, serial tag is missing. Good running machine that is ready for work

320A
Galion Road Packer
Model: S4-6B, SN: WD81355, Dresser 4 cylinder diesel engine, 32 x 40" rear drum, 48 x 40" front drum, 9.0-20 tires, not running condition

322
2005 CAT 420D Backhoe
PIN: CAT0420DPBLN12747, meter reads: 5200 hours, 19.5-24 tires on rear, 320/80-18 tires on front, CAT diesel engine (SN: CRS25257) has quick attach system, includes quick attach forks (5" x 54" forks, 5' wide), includes quick attach bucket, 32" x 88", includes 2" excavator bucket with 5 teeth. In good running condition 

326
Hesston 55-56 LM108 Tractor
SN: 078828
Meter reads: 5,562 hours
Engine: Fiat 8035-06
Fuel type: Diesel
Transmission type: 4 speed manual
Drive: RWD
Rear PTO: Yes
3 Point hitch: Yes

Features and Notes: Has auxiliary hydraulic hookup in back 540/1000 PTO, starts right up and runs good, 14.9-28 tires on rear, 9.5-15 tires on front.
 

327
White 255-82008 Tractor
SN: 285848421
Meter reads: 2,391 hours
Engine: White Diesel (SN: 4009554)
Fuel type: Diesel
Transmission type: 6 speed manual
Drive: 4WD
Rear PTO: Yes
3 Point hitch: Yes

Features and Notes: 18.4-26 tires on front, 20.8-38 on rear, can be used with duels, has 6 hose auxiliary hydraulic bookup, starts and runs good.
 

328
White 211-83050 Tractor
SN: 303610436
Meter reads: 8,398 hours
Engine: Diesel Engine (SN: TU70018U734258L)
Fuel type: Diesel
Transmission type: 6 speed manual
Drive: RWD
Rear PTO: Yes
3 Point hitch: Yes

Features and Notes: 16.9-28 tires on front, 18.4-38 on rears setup for duels, has 6 hose auxiliary hydraulic hookup, starts and runs great.
 

329
White 255 Tractor
Meter reads: 4,227 hours
Engine: White Diesel (SN: 4006435)
Fuel type: Diesel
Transmission type: 6 Speed manual
Drive: 4WD
Rear PTO: Yes
3 Point hitch: Yes

Features and Notes: 11-16 tires on front, 480/80R38 on rear, setup for duels, 4 hose auxiliary hydraulic hookup, starts and runs good.
 

329A
White 155-22007 Tractor*
SN: 274994-415
Meter reads: 4,144 hours
Engine: White (SN: 4004263, Model: D5000TX9-155
Fuel type: Diesel
Transmission type: 6 speed manual
Drive: 2 RWD
Rear PTO: Yes
3 Point hitch: Yes

Features and Notes: 20.8R38 tires on rear, set up for duals, 11.0-16 tires on front, starts and runs strong
 

330
McCormick Farmall H Tractor
SN: 74191-X1
Engine: 4 cylinder
Fuel type: Gas
Transmission type: 5 speed manual
Drive: RWD
Rear PTO: Yes
3 Point hitch: No

Features and Notes: 1815 rpm on idle, needs battery, does not start, new seat, 15.5-38 tires on rear, 6.0-16 tires on front.
 

331
2006 John Deere 7520 Tractor
SN: RW7520R051703
Meter reads: 4,520 hours
Engine: John Deere 6.8L Power Tech
Fuel type: Diesel
Transmission type: Power-Shift
Drive: 4WD
Rear PTO: Yes
3 Point hitch: Yes

Features and Notes: 150 hp, 380/85R28 tires on front, 460/85R38 tires on rear, fully enclosed cab with air ride seat, Heat/AC, digital display, runs strong, good tractor.
 

332
John Deere 6310 Tractor
SN: L06310M272389
Meter reads: Meter is blank. Aprox. 2700-2800 hours per previous owner
Engine: John Deere 4045 (SN: CD4045T587090)
Fuel type: Diesel
Transmission type: Power Shift
Drive: 4WD
Rear PTO: Yes
3 Point hitch: Yes

Features and Notes: 99 hp, 380/85R24 tires on front, 18.4-34 tires on rear, auxiliary hydraulic hookups, open cab, starts and runs strong, great tractor.
 

333
John Deere Model 60 Tractor*
SN: 6060776
Fuel type: Gasoline
Transmission type: 6 speed manual
Drive: RWD
Rear PTO: Yes
3 Point hitch: No

Features and Notes: Has power steering, 13.6-38 tires on rear, 6.0-16 tires on front, does not run.
 

334
John Deere Model A Tractor*
SN: 430999
Fuel type: Gasoline
Transmission type: 2 speed manual
Drive: RWD
Rear PTO: No
3 Point hitch: No

Features and Notes: Has drawbar, 12.4-38 tires on rear, 5.5-16 tires on front, does not run
 

335
John Deere 5830 Silage Chopper
John Deere 6619 Diesel (SN: RG6619A055436), meter reads: 1387 hours, fully enclosed cab with heat/AC, 14.9-24 tires on rear, 23.1-26 tires on front, extra counter weight on rear, John Deere chopping head (SN: FORBMDX750156), Does not include Kemper Corn Head. This chopper was recently gone thru and is field ready. Great unit.

335A
Kemper Champion 330 Corn Shopping Head*
10' Wide, Was used on Lot #335,Freshly gone through by shop

335B
John Deere Kernel Processor Head*
SN: E000KPX783143, 7' long, 2' wide infeed, Fully rebuilt by shop, Used for less than 15 acres since rebuild

335C
John Deere 5830 Silage Chopper Entirety of Lots 335-335B*
With 10% Raise to Open the Bid

336
John Deere 5830 Silage Chopper
PIN: E05830X927170, John Deere 6619 engine (SN: RG6619A061234), meter reads: 4,267 hours, 14.9R 24 tires on rear, 750/55R 26 tires on front, fully enclosed cab with heat/AC. Field ready.

336A
John Deere 80" Hay Chopping Head*
SN: E0RBMDX926915, Was used on Lot #336, Was just fully gone through by shop

337
John Deere 4 Bottom Plow
Model: A1450, SN: 124604, 24" plow bottoms, 18" discs, 3 pt. hitch and hydraulic hookups, 11L-14SL tires, 19' long overall

337A
Hay Tetter Rake
Model: RCS8, pulls pin through hitch, hydraulic hookkups, hydraulic cylinder for control arms, (9) discs-56", 19' wide when folded down

338
Bush Hog Disc*
Hydraulic hookups and pin-through hitch, hydraulic cylinders for disc control, 14' x 22' wide when folded down, 20" discs, 11L-15 8 ply tires

338A
Cultivator*
Hydraulic hookups and pin through hitch, hydraulic cylinders for controls, 16 x 54" rolls, 12.5L-15 tires, front 2 rolls need repaired and reinstalled, 12' x 23' wide when folded down

339
80" Brush Hog
SN: 028-8008, 3 pt. hitch, runs off PTO, has stump jumper, hydraulic hookups,

339A
80" Brush Hog
SN: 20902, 3 pt. hitch, runs off PTO, hydraulic hookups, has stump jumper

339B
2013 Vicon Spreader
Model: PS225, SN: VN2160301784, 3 pt. hitch, runs off PTO, holds up to 385 kg

339C
Massey Ferguson 2-Bottom Plow
SN: 248-013541, 3 pt. hitch, 18" plow bottoms

339D
Bush Hog Scraper Blade
Model: 100, SN: 12-10327, 3 pt. hitch, hydraulic hookups, 18" x 9' blade

339E
Woods 75" Brush Bull*
Model: BB720, SN: 859885, 3 pt. hitch and PTO hookup

339F
Bale Spear*
44" long spear

339G
Century 200 Gallon Sprayer*
3 pt. hitch and hydraulic hookup, (4) 90" arm sections

339H
Farm King Grading Rake*
3 pt. hitch, 74" wide, manual angle adjustment

339I
John Deere Lawn Sweeper*
44" wide, pin through hitch for lawn tractor

339J
Bobcat Sweeper*
Standard quick attach plate, hydraulic hookups need repair, 4' x 5' wide

339K
Frontier Spreader*
SN: 1XFSS20BAC0297751, 3 pt. hitch, PTO hookup, 3' wide at top, 28" tall

339L
Spreader*
3 pt. hitch, PTO hookup, 4' wide at top, 3' tall

339M
Snow Blade*
Standard skid steer quick attach plate, 90" wide, hydraulic hookup for blade angle

339O
John Deere Roto-Tiller*
3 pt. hitch and PTO hookup, 80" wide, needs repair

339P
Double Deck Brush Hog
Mounts with belly PTO plate, (1) 64" and (1) 54" deck, hydraulic hookups, includes hydraulic tank, needs repair

339Q
Hydraulic Tanks with Pump
(2) 2' x 2' tanks, pump and hose valves mounted on 1 tank

339R
Jeep Hood
Fits 1975 model Jeep

340
New Holland 354 Feed Mixer
Runs off PTO, pulls with pin through hitch, 31 x 13.5-15 tires, holds up to 5600 lb at 56 lb/bushel, fold up augers, works as it should

341
2003 Mack Dump Truck
VIN: 1M2AG10C03M005353
Meter reads: 604,232 miles
Engine: Mack A1 460 (SN: 201435) rated at 460 hp
Transmission: Maxi Torque 8 speed manual
GVWR: 62,000 lbs
Front axle rating: 18,000 lbs
Rear axle rating: 22,000 lbs
Heat/AC: Yes
Wet kit: Yes

Features and Notes: Air ride seat, starts and runs strong, Beau-Roc. SN-DL324865, 8' x 18' x 5' dee, Tri-Axle 11R24.5 tires on rear, 385/65R22.5 on front. Well maintained truck that is road ready. Has title

342
1991 5 Ton 6x6 Military Truck
VIN: 23704542
Meter reads: 8,778 miles
Engine: Cummins Diesel
Transmission: 5 speed automatic
Heat/AC: No
Wet kit: No

Features and Notes: 92" x 14' flatbed with 14" fold down sides, 14R20 all around.

339N
Bobcat Packer*
Standard quick attach plate, hydraulic hookups, 2' x 4' roller

343
White RBM64G Semi Truck
VIN: G9GCAAA852161
Meter reads: 386,649 miles
Engine: 6 cylinder diesel
Transmission: 8 speed Eaton Fuller
GVWR: Unknown
Heat/AC: No

Features and Notes: 11R24.5 tires, has air brake lines, does not start or run. Has title

349
1973 Seagrave Ladder Truck
Model: SR20T86, SN: B73161, automatic transmission, 51583 miles, air brakes, does not run, 1 - 32' ladder, 1- 45' ladder, approx. 128' long main ladder. No title, bill of sale only

349A
American Lafrance Fire Truck
Does not run, selling as parts machine, meter reads 28,443 miles, automatic transmission. No title, bill of sale only

344

351
Sullair Portable Air Compressor
Model: 185-DRO-JD, SN: E0A117549, 125 mas psig, John Deere 4039DF engine (SN: CD4039D212219), diesel fueled, meter reads 540 hours, reel of hose mounted on front pulls with pintle hitch, 215/75R15

352
1974 Fruehauf Chip Trailer
VIN: HPR472383, 68000 lb GVWR, 40' long, 92" inside width, 97" inside height, 11R22.5 tires, includes spare tire and 3' 6 tooth backhoe bucket. Has title

353
1974 Fruehauf Chip Trailer
VIN: HPS494725, GVWR: 68000 lb, 40' long, 11R22.5 tires, 93" inside width, 95" inside height. Has title

365
Hydraulic Tension System for Resaw
Includes reservoir, pump and hoses

354
Mobile Office Trailer
VIN: AI19015A, Pulls with 2 5/16" ball, 8' x 32' x 7' high, single axle, has main door and overhead door, includes all contents. Has title

376
Armstrong Stretcher Roll
SN: 16674, Model: 3-60-C, electric drive

355
Dump Bed
8' x 16' x 54" deep, includes main cylinder for dump

356
Shop-Built Boom Crane Gooseneck Trailer*
VIN: WV-152-285, 7'6" x 24' overall, dual tire axle with LT 215/85R16 tires, toolboxes on sides, Versalift crane - 300 lb capacity, hydraulic controls (model: V025-GS, SN: J19111), 25" diameter x 44" deep fiberglass bucket

356A
Aluminum Dump Bed
8' x 18' with 64" sides, in good condition, no cylinder included

357
Flatbed Trailer
285/75R 24.5 tires, 8' x 43', wooden deck, in rough condition, VIN tag is missing, includes tie down straps. No title, bill of sale only

374
John Deere X595 Riding Lawn Mower
60" mowing deck, no issues, John Deere diesel engine (SN: CH3010D110661), hour meter is fogged over, hydrostatic drive

375
Newman G-200 Knife Grinder
Electric drive, 20" max knife length

377
Welding Rods
Antique fridge filled with welding rods and parts

378
Chipper knives
100 or more knives, counter knives, holders, parts

383
Steel Cables
4 pieces with loops on each end

379
Newman G-132 Knife Grinder
32" knife holding bed, 7' long overall, electric drive

380
Yates American Planer knives
2" x 15" x 5/32", 30-40 sets, approx. half are in like new condition

381
Circle Saw Wrenches
For setting teeth

386
Cutting Torch Set
Includes cart, tanks, leads, gauges, and torch

382
Steel Sawhorses
4' x 30" tall, 32" wide at base

384
56" Circle Saw
B8 style, 2" arbor

385
56" Circle Saw
B8 style, 2" arbor, damaged

387
Assorted Saw Blades
(10) 26", (4) 30",(1) 26", (13) 18-20", some broken, need sharpened

388
Edger Blades
(12) 20", (7) 18", 4" and 1 1/2" arbors, need sharpened

391
Loader Rims
8 lug, 14" x 27.5"

389
22" Blades
23 total, most in good condition, will need sharpened

390
Tire Chains
14" wide

392
Husk Wrenches
Includes all wrenches hanging from wall as pictured

394
Pacific Saw and Knife Circle Saw Grinder
64" max saw size, 110 plug in, shavings bag collector, 10" grinding wheel

393
Shelf with Parts
16" x 4' x 4' tall

395
Cutting Torch Parts
2 torches, goggles, 1 new tip, used tips, tip cleaners, 2 ignitors

396
2 Levels
(1) 48", (1) 78"

397
Steel Table with Tools
38" x 78" x 37" tall, assorted hand tools, files, wrenches, sockets, assorted, fasteners

398
Debarker Parts
(2) heads, no teeth, 10 groove 12" pulley on shaft

399
Floor Jack
SN: 548185, 8000 lbs capacity, condition unknown

400
Bablor 6" Bench Grinder
SN: F588, 110 plug in, 3600 rpm,

401
Oregon Chainsaw Sharpener
SN: 265791, Model: 511A, 110 plug in

402
Steel Work Bench with Contents
30" x 14' x 38" tall, includes all contents of bench and contents on wall and shelf above bench, electric motors, bearings, cylinders, hand tools, air impact

403
5" Wilton Bench Vise
18" long when closed

404
Delta Drill Press
SN: 5752, 110 plug in, 12" x 12" tabletop

408
Steel Cabinet
Includes all contents, 5' x 42" x 78" tall, hand tools, chain parts, electric drill, hydraulic parts, sprocket

405
Anvil
4.5" x 14" flat surface

409
Steel shelf with All Content Bearings
3' x 15' x 6' tall, includes all items on and under shelf, electric motors, cylinders, pulleys, hydraulic pumps, and motors

406
60" Pipe Wrench

410
Pallet of Chain
20 rolls of H78 chain, 10' per roll, 10' of brand new roller chain

407
36" Pipe Wrench

411
Fire Hoses
6 rolls of 3" hose

412
Electric Wire
Includes all assorted wire as pictured

413
Water Pump
Honda GX120 gas motor, 2" hose with filter, includes Ross valve

414
Air Compressor Frame
Includes tanks, frame, and pulley, no motor or compressor

416
Shelf
13" x 30" x 66" tall

417
Assorted Saw Blades
14" to 20", 7 new 20" edger blades

418
Fastener Organizer
9" x 34" x 39" tall, includes all parts in organizer and new bearings beside shelf

419
Hydraulic Hoses
32" x 4' x 2' deep box, lots of new hydraulic hoses

415
Portable Hammering Bench
10" x 5' x 35" tall

420
Shelf with Contents
Lights, electric motor, welding mask, saw blades, assorted parts

421
Troy-Bilt Garden Tiller
Comes with extra 5 1/2 hp Honda motor, powered by 11 hp Briggs and Stratton motor, condition unknown

422
Trash Pump
1 1/2" Generae pump, CW15K Water pump, 79 cc motor, includes feed hose and fire hose, also includes 3 pt. hitch frame

423
3 Part Washers
110 V plug in

424
7500 Watt Generator
420 cc motor, Model: SP-GG750E, Homelite 8" blower with 3.5 hp gas motor

425
Ceiling Lights and Bulbs

426
Spools of Rope
(1) 17" x 17" spool with 3/4" rope, (2) 2' x 2' spools with 3/4" rope

427
Pallet of Misc. Hardware*
(2) 3 ton jack-stands, screws, nails, bolts, door hardware, castors

428
Pallet of Misc. Lighting*
Fixtures and parts

429
Pallet of Tools *
2000 psi-4 hp pressure washer, 2 1/2" - 3 1/2" fire hoses, Craftsman 21cc-7" edger, 5 hp, 125 max psi electric air compressor

430
Pallet of Misc. Hardware*
Plumbing fittings, thermal blankets, tie down tools, washing and detailing supplies

431
Pallet of Lights*
(6) Ceiling lights

432
Pallet of Misc. Hardware*
Springs, detailing supplies, 220V, make to female adapters, assorted trailer lights

433
Pallet of Misc. Hardware*
Insect traps, cleaning supplies, plumbing parts, spray paint

434
Pallet of Misc. Hardware*
Tail lights, tire covers, spray paint, insect screens, auto parts and fluids

435
Pallet of Misc. Hardware*
Plastic mats, clamps

436
Crate of Assorted Belts*

437
Crate of Assorted Belts*

438
Pallet of Misc. Hardware*
Clamps, pulleys, wire brushes, home security kits, paint roller, mesh aluminum, car grills, locks, sink fittings, fasteners, gate latches

439
Steel Cutting Saw and Plate Compactor*
Wacker 135 lb upright plate compactor, Stow True 14" metal cutting chop saw

440
Adjustable Skate Rolls*
2' x 7', extendable, removable legs

454
Assorted Rough Cut Lumber
3/4 - 3" thick, 4" - 20" wide, 6' - 20' long, includes all lumber as pictured, air dried

441
Adjustable Skate Rolls*
2' x 7', extendable, removable legs

442
Pallet of Misc. Hardware*
40" - 48" pipe clamps, wall heater, window AC unit, 110 V work lights, pipe threader fittings

443
Tank Cart and Sander*
28" x 5' cart-holds up to 24" diameter tanks, Clarke Super 7" sander-110 plug in, includes case

444
Pallet of Misc. Hardware*
Sink and plumbing parts, steel wire rope, paint sprayer, hand tools, shower and tub parts, toilet parts, assorted fasteners, door knobs and locks, automotive fuses

445
Pallet of Misc. Hardware*
Shower and tub parts, toilet parts, assorted fasteners, door knobs and locks, automotive fuses

446
Bolt Organizers*
(14) 13" x 16" x 13" organizers, (5) 10" x 13" x 7" organizers, all loaded with assorted fasteners

447
11R22.5 Tires*
(5) tires, mounted on steel rim, (4) in good condition, (1) almost gone

448
Fuel Jugs and Carts*
(7) 5 gallon jugs, (1) 2.5 gallon jug, (1) 2 gallon jug, assorted shop carts

449
Scaffolding*
Includes castors, supports, platform sections, and legs

449A
Hand Tools*
Assorted shovels, concrete tools, post hole digger, chisels, pry bars

449B
Assorted Threaded Steal Rods*
6' long sections, 3/16" to 1/2" rods

449C
Sumner Manual Pallet Truck*
650 lb capacity, 22" x 28" forks, hand crank, has stabilizers

449D
Sumner Manual Pallet Truck*
Model: 720, SN: 720-5110, 750 lb capacity, 22 x 26" forks, needs repair

450
Assorted Rough Cut Lumber
3/4 - 3" thick, 4" - 20" wide, 6' - 20' long, includes all lumber as pictured, air dryed

450A
Rough Cut Lumber*
Approx. 6800 BF, 6-12" wide x 16' long, 1 3/4" thick

450B
Rough Cut Lumber*
Approx. 4,600 BF, 6-12" wide x 16' long x 1 3/4" thick

450C
Rough Cut Lumber*
7' long, 5/8" thick, 5-11" wide, approx. 1600 BF

450D
Rough Cut Lumber*
6-12" wide x 10' long x 1 3/4" thick, approx. 2100 BF

450E
Rough Cut Lumber*
6-12" wide x 1 3/4" thick x 10' long, approx. 3000 BF

450F
Rough Cut Lumber*
6-12" wide x 10' long x 1 1/2"-2" thick, approx. 3000 BF

450G
Rough Cut Lumber*
6-12" wide x 10' long x 1 1/2"-2" thick, approx. 3000 BF

450H
Rough Cut Lumber*
6-12" wide x 10' long x 1 1/2"-2" thick, approx. 4600 BF

451
Assorted Rough Cut Lumber
3/4 - 3" thick, 4" - 20" wide, 6' - 20' long, includes all lumber as pictured, air dryed

452
Assorted Rough Cut Lumber
3/4 - 3" thick, 4" - 20" wide, 6' - 20' long, includes all lumber as pictured, air dryed

453
Assorted Rough Cut Lumber
3/4 - 3" thick, 4" - 20" wide, 6' - 20' long, includes all lumber as pictured, air dryed

455
Pallet of Metal Trim
6" wide x 10' long metal ridge cap, approx. 70 pieces

455A
Pallet of Auto Parts
Muffler, fluids, jack stands, door hinges

455B
Pallet of Misc.
Microwave, table saw, RV accessories, work lights, hood scoops

455C
Lawn Mower Tires
(1) 205/65-10 with rim, (1) AT24x8-11, (1) AT24x10-11, (1) lo-lug 16 1/2" rim, (1) 6 lug 17 1/2" rim

456
Pallet of Soffit and Gutters
Vented vinyl soffit, soffit trim, vinyl gutters and fittings

457
Pallet of Metal Trim
Assorted metal trim

458
Pallet of Metal Trim
Vented soffit, ridge trim, F + J channel, fascia

459
Pallet of Vinyl Gutters and Trim
Vented soffit, J channel, gutters and fittings

460
Pallet of Metal Gutter and Trim
Vented soffit, corner roof trim, fascia, J channel, gutters

461
Pallet of Siding and Trim
Vinyl siding and soffit, metal corners and drip edge, Fascia

462
Pallet of RV Parts
TV antenna, RV jacks, sway control bar fuel tank

463
ATV Tops
New 11 pieces

464
Pallet of Misc.
Coolers, vacuum, wire, foam rolls, pipe threader stand, Troy-Bilt sidewalk edger

465
Utility Cart
3/4 ton wheel dolly

466
Shelves and Peg Board
(1) 30 x 36 x 24" tall, (1) 30 x 48 x 22" tall, 3' x 4' sections of peg board, approx. 40 pieces

467
Pallet of Tools
60 gallon air tank, hanging lights, screws, PVC pipe heater,

468
Pallet of Tools
Banding cart, chicken wire, wire shelf, toolbox

469
Pallet of Misc.
Cleaning supplies, light bulbs, exhaust parts

470
Pallet of Misc.
ATV oil, welding leads, chalk for chalk lines, misc. hardware, mixing oil, mirror parts

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Formerly Braxton Lumber Co.
 Live Auction
 
Auction Date(s)
Thursday Jun 8, 2023 Completed
Auction Location

Heaters, WV 26627
Company
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Website: brightstarauctions.com

Listing Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
  2. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
  3. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:
“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
  2. Governing Law.
    1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
  3. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
  4. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  5. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
  6. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
  7. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
  8. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
    2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
    3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
    4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
    5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
    6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
    7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
    8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
    9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
    10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
    11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
    12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
    13. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
  9. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
  10. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
  11. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
  12. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
  13. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
  14. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
  15. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
  16. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
  17. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
  18. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  19. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
  20. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
  21. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
  22. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
  23. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
  24. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
  25. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
  26. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
  27. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
  28. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
  29. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
  30. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
  31. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
  32. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
  33. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
  34. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
  35. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
  36. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
  37. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
  38. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Sawmill Liquidation and Heavy Equipment
 

00
Information Lot
Sawmill Liquidation and heavy equipment

HIGHLIGHT PIECES: Wood-Mizer LT-70 sawmill, numerous farm tractors, wheel loaders, trailers, and more.

AUCTION/SELLER STORY: After 50 years in the sawmill industry, Braxton Lumber will sell its complete sawmill operation at live, onsite, no-reserve auction on June 8, 2023, at 9 am. The auction offers a unique opportunity to acquire high-quality, well-maintained equipment, including "like new" Wood-Mizer equipment, top-of-the-line McDonough equipment, and more. Bright Star Auctions is honored to conduct this event, providing a fair and transparent bidding process. Register in advance to bid online or show up onsite the day of the auction to take possession of this equipment and continue the legacy of Braxton Lumber in your own way.

01
Preview Information
June 5th - 7th from 8 am to 4 pm. Contact Jonathon to make an appointment 574-821-7530

02
Loadout Information
Free loading will be available Friday June 9th from 7-5 and Saturday June 10th from 7-noon. After that it will be by appointment only and at the buyers expense.
RIGGERS: Tenex Industrial. Joe Fisher is the contact 717-314-7317

03
Payment Information
Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction.
 

92
CAT 555D Wheel Skidder 1:50 Scale Replica - Die Cast Metal
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s
 

92
CAT 555D Wheel Skidder 1:50 Scale Replica - Die Cast Metal
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s
 

98
Heavy Equipment Key Set 36 Keys
Shipping available for $20

98
Heavy Equipment Key Set 36 Keys
Shipping available for $20

99
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

100
4 Strand Log Deck with Stop'N'Load
(1st lot of an entirety) Electric drive, hydraulic cylinder on loading arm, 14'6" x 27', includes steel log bumpers on sides as marked, includes structural steel to ground and catwalk around sides.

101
Rosserhead Debarker
(Part of entirety) 40 hp electric drive on cutting head, cutting head swivels, air cylinders on truck lift, 3" x 26" bull wheels, hydraulic cylinders on log kickers, hydraulic drive on bull wheels, 9' 6" x 26' 6" overall, 6' x 7' x 8' tall, cab with all controls included.

102
Incline Paddle Chain Waste Conveyor
(Part of entirety) 2 1/2" x 14 1/2" paddles, electric drive located under debarker, includes slide pan, 14" sides, 17" pan, 3' x 75' overall

103
10 hp Hydraulic Pack
(Part of entirety) 2' x 3' x 12" tank, pump, valves, includes all hydraulic lines and hoses to equipment

104
Debarker Entirety of Lots 100-103
With 10% raise.

105
4 Strand Log Deck with Stop'N'Load
Main deck is 13' x 26', includes 3' x 13' 6" nose skids, electric drive with Tulsa gearbox, includes steel tubing as marked

106
64" Bar Type Log Turner
Hydraulic drive, hydraulic cylinder, 28" x 6' frame

107
HMC AC44 3 HB Carriage
(1st of an entirety) SN: AC44-160, includes pantograph, air dogs, 5/8" dogs, tong dog, 1st HB to 2nd HB-66", 2nd HB to 3rd HB-55", 8' x 17', 4 axle, air over 110 setworks, controls in cab included

108
Carriage Truck
(Part of entirety) 64" center to center, 68' long, includes structural steel to ground, includes pulleys mounted in truck

109
Tyrone Berry Carriage Feed and Drive
(Part of entirety) SN: A2850, Model: SMA-225, Spool of 3/4" steel cable, gearbox, hydraulic pumps, 1800 rpm, 1500 psi, 60 hp electric motor, 26 x 32 x 16" tank, includes all hydraulic lines to equipment

110
Slab Dump Conveyor
(Part of entirety) Air cylinder for dump, electric drive, 28" belt, 4' x 15' overall, includes air valve

111
40 Hp Hydraulic Pack
(Part of entirety) 3' x 3' x 30" tank, includes pumps, valve station and all hydraulic lines to equipment

111A
Electric for Carriage Entirety
(Part of an entirety) Motor starters for carriage, carriage drive, and hydraulic pack

112
Sawyer's Cab
(Part of entirety) 55" x 100" x 7' tall, has AC unit, is insulated, does not include any controls, controls go to equipment they were used on

113
HMC AC44 Carriage Entirety of Lots 107-112
With 10% raise.

113A
Jacobson AC/DC Carriage Drive
Setworks box with 250A, 600 VAC 460V transformer, 125 hp electric motor with blower motor, includes conduit from boxes to equipment

114
McDonough 6' Head Rig
SN: 72-MA-344, 11 1/2" x 6' band wheels, 1" mead on top wheel, 9" band, 28" x 5' off-bear slat conveyor with electric drive, lineal positional cylinder, air strain, does not include main electric drive

115
Electric Motor
444T frame, 150 hp, 1770 rpm

115A
VMX Solid State Soft Starter
Model: VMX-361-BP, 126 hp at 208 V, 126 hp at 240 V, 300 hp at 480 V, 360 hp at 800 V

116
Laser System for Band Mill
24' long, includes steel supports

117
Belt Conveyor
16" belt, 6" sides, 20" x 30', electric drive, includes slide pan

118
Paddle Chain Waste Conveyor
Electric drive, 14 1/2" paddles, 2' x 100' long overall, includes structural steel to ground

119
Roll Case
12" x 29.5" rolls, 24" spacing, 44" x 65" long, 16 spiral rolls, 13 regular rolls, electric drive, includes slide ramp for unloading

120
4 Strand Transfer Deck
Missing chain on 2 strands, H78 chain, electric drive, air cylinder on cant loading arm 12.6" x 21'. Includes slide ramp to rails

121
McDonough 6' Line Bar Resaw
(1st of entirety lot) SN: 72-MA-398, Air strain, missing lineal positioning cylinder, 11" x 72" band wheels, 1" meat on top wheel, 34" x 11'6" feed rolls, 3 power feed roll arms, hydraulic on all feeds, hydraulic cylinders, does not include main electric drive, SN on feeds rolls LBR-43, there are no setworks or controls included with this system

122
Electric Motor
(Part of entirety) 150 hp, 1780 rpm, 460 V, 444T frame

123
Infeed Roll Case
(Part of entirety) 8" x 36" rolls, 22"-42" spacing, 3-32" 2 way transfers, hydraulic drive, 4' x 18'

124
Outfeed Roll Case
(Part of entirety) 8.5" x 43" rolls, 24" spacing, hydraulic cylinder for width adjustment, 5' x 28', hydraulic drive

125
4 Strand Transfer Deck
(Part of entirety) 14' 6" x 6', 4-54" pop-up arms, does not include shaft on end against 180 degree deck, hydraulic drive

126
McDonough 4 Strand 180 Degree Transfer Deck
(Part of entirety) 12.6" wide, 23' inside to inside, hydraulic drive, includes support steel to ground

127
4 Strand Transfer Deck
(Part of entirety) Does not include shaft on end against 180 degree deck, hydraulic drive, cant loading arm

127A
Operators Cab
(Part of an entirety) Includes control panels for run around system, 6' x 8' x 7' tall, needs glass replaced

128
Hydraulic Unit
(Part of entirety) (1) 20 hp motor, includes cooling unit and electrical panel, (1) 50 hp motor, includes all pumps and valve stations, 2' x 6' x 28" tank, includes all hydraulic lines to equipment, includes stand

129
5 Hp Hydraulic Pack
(Part of entirety) 14" x 24" x 20" tank, includes all hydraulic lines to equipment

130
Entirety of lots 121-129
With 10% raise. There are no setworks or controls included with this system

131
Belt Conveyor
Electric drive, includes cut off, 9" belt, 36' long

132
Belt Conveyor
Electric drive, 29" belt, 56" x 25'

133
4 Strand Transfer Deck
Electric drive, 12' 6" x 8' 6", (4) 4' pop-up arms

134
4 Strand Transfer Deck
10' 6" x 10', 3' of transfer is pop-up with air cylinder, electric drive

135
Corley Gang Edger
SN: E-648-028, 6" x 48" capacity, 54" x 9' 6" infeed rolls, laser light, hydraulic controls, include 5 hp hydraulic pack, 10" x 25" x 24" tank, 2 blades, 1 moveable, 75 hp electric motor, includes electrical and control box, twin tailing belt outfeed, 6" x 20' belts

136
Belt Conveyor
Electric drive, 30" belt, 4' x 25'

137
Cant Slide Rack
13' x 14' decline with 6' flat section

138
4 Strand Transfer Deck
Electric drive, C55D rooftop chain, 10' x 42', includes 9'6" x 38' steel stacking rack

139
5 Strand Transfer Deck with Rolls
12' 6" x 15', does not include shaft on end against trim saw, (5) 6" x 42" rolls, roller chain with pegs, strands are offset

140
Hemco 10 Head Drop Saw Trimmer
7.5 hp motor on each head, 22" saws, 2 heads are not setup, 20' capacity, includes 6' x 19'6" slide pan, includes control panel, 7' x 22' overall, 18" x 20' waste conveyor

141
4 Strand HMC Green Chain
SN: 872-77, Model: LT24, 10'6" x 98', electric drive

142
Horizontal Air Tank
20" x 5'

143
Horizontal Air Tank
2' x 66"

144
Air Compressor
No drive, 2' x 66"

145
Sullair LS160 Air Compressor
SN: 003-133002, 75 hp electric motor; includes air filter, exhaust pipe, and air line to equipment

146
Sullair LS12 Air Compressor
SN: 003-106899, meter reads: 5,190 hours, 60 hp electric motor; includes air filter, exhaust pipe, and air line to equipment

147
Dust Conveyor Paddle Chain
16" x 90' x 14 1/2" paddles, electric drive

148
Belt Conveyor
26" belt 6" side, 32" x 95', electric drive

149
Belt Conveyor
6" belt, 6" side, 18" x 60', electric drive

150
Fulghum 60" Chipper
(1st of an entirety) 4 knives, no drive

151
Westinghouse Electric Motor
(Part of an entirety) 150 hp 1775 rpm, 445T Frame

152
Westinghouse Soft Start
(Part of an entirety) Model: VMX series

153
Fulghum Shaker Screen
(Part of an entirety) Model: 8X8 screen, SN: FIR-953, includes 6' cyclone with pipe to chipper

154
Phelps Fan Chip Blower
(Part of an entirety) 48" blower with 3 truck loading chutes

155
28" Blower
(Part of an entirety) no motor

156
Chipper Entirety of Lots 150-155
With 10% raise.

157
Fulghum Vibrating Conveyor
35' long, 18" pan, 8" sides, electric drive, chipper feed chute

158
Chain Conveyor
18" x 54', 14" paddles, 32" slide pan, 6" sides, electric drive

159
Chain Conveyor
26' long, 10" sides, 18" wide, electric drive

160
Belt Conveyor
56' long, 30" wide, 28" belt, 6" sides, electric drive

161
Hydraulic Pack
Electric drive, fire damage

162
Clarksville Machinery Rip Saw
SN: R-71, Electric drive, manual width adjustment, 7" x 64" Skate roll outfeed, (2) 6" x 6' chain feeds, no blade, 24" width capacity.

163
Lincoln Electric Motor
150 hp, 1780 rpm, 444T frame, 460 V, 3 3/8" shaft

164
Gator Fast Line DBL End Trim Saw
Electric drive, 18" blades, 6' width capacity, both heads are moveable, includes electrical disconnect, 7' x 9' overall, manual head movement.

165
2 Blade Scragg Edger
20 hp electric motor on each head, no blades included, fits up to 20" blades, 12' 1 strand chain feed, 5' x 12' overall.

167
Belt Conveyor
23" belt, 32" x 31", electric drive.

165A
Square D Model 5 Motor Control Center*
600 amps horizontal, 300 amps vertical, 8 vertical sections, does not include any conduit

165B
Conduit*
Includes all conduit from Lot 165A to equipment, does not include any 110V conduit or any conduit or wiring for the building

166
Yates 612 4 Head Planer/Molder
SN: B29560, 3 upright heads, 8" x 12" capacity, electric drive, includes catwalk around plainer, includes control stand, does not include any dust pipe.

168
2-Strand Log Deck
(1st of an entirety) 80" x 17'6", has Tulsa gearbox but no motor, includes support steel to ground

169
Frick 3 HB Handset Carriage and Track
(Part of an entirety) 36' of track, 34" center to center, 1/4" cable, includes pulleys and cable drum, 52" x 15' carriage wooden frame on track and carriage, 1st HB to 2nd HB is 64", 2nd HB to 3rd HB is 48"

170
60" Frick Husk
(Part of an entirety) 56" saw IX7P style, 40 x 88" wooden frame, 22" x 80" off bear, 2 3/16 x 64 mandrel shaft

171
6 Cylinder Detroit Diesel Power Unit
(Part of an entirety) Includes exhaust pipe, radiator and pulley mounted to clutch

171A
Building and Crib Blocks
(Part of an entirety) Includes all wooden blocks and beams under lots 168-171, includes building

172
Frick Circle Mill Entirety of Lots 168-171A
With 10% raise.

175
Armstrong Band Stretcher Roll
SN: 46267, Model: 5-14 includes all rolls, 12" x 48" x 4" hammering block

176
Armstrong #4 RH Band Saw Sharpener
SN: 16182, includes all swedges as pictured, includes all clamps and stands as marked, Clamp model 58B

177
Welding Table with Grinding Wheels
24" x 57" x 42" tall table mounted on Eastors, Armstrong #16 welding clamp mounted on table, approx. (95) 12" x 7/8" x 1 1/4 grinding wheels, used

178
Carriage Cable
(2) partial rolls of coated 3/4" steel cable, length unknown

179
McDonough Knife Grinder
SN: BDM-673, 4" bench vise mounted on stand, includes all tools plus parts on stand and in drawers

182
Lincoln SP-135 Plus Wire Welder
Code: 10868, SN: U1010510952, 115 V single phase input, includes gas tank, mask, and cart

180
Armstrong #14 Band Shear
Mounted on castors, manually operated

183
Cutting Torch Set
Includes oxygen and Acetylene tanks, gauges, leads, and mask

181
Bands
(12) 12" bands, fit lot # 114 or 121, includes partial rolls of edge guard, (175) sharpening room, (421) smalls

184
Space Heaters
50000 BTU Mr. Heater-110V plus fuel, 45000 BTU Protemp-110V plus fuel, 20" floor fan-110V

185
Hand Tools
36" cant hook, scoop shovel, 48" crow bar, DeWalt 7" corded grinder with wire brush heads

186
4-Strand Log Deck with Stop'n'Load
10'6" x 30', includes 10' x 12' steel plate section and catwalk on side of deck, hydraulic cylinder on arm, has Tulsa gearbox but no drive, includes support steel to ground

187
4-Strand Log Deck with Stop'n'Load
Hydraulic drive with Tulsa gearbox, 10'6" x 16'6", includes support steel to ground, no cylinder on loading arm

188
Reckart 36" Chain Type Log Turner and Nose Skids
(1st of an entirety) No drive or cylinder, 42' x 10'6" section of nose skids

189
Carriage Track and Feed
(Part of an entirety) Drum of 3/4" cable and pulleys, 45" center to center of track, 51' long, includes support steel to ground

190
56" Husk
(Part of an entirety) Includes 56" F8 style saw-not installed, 22" x 64" off bear with 13" belt, runs off mandrel, 2 15/16 x 5" mandrel shaft, includes hydraulic pump and lines hooked to mandrel, 4' x 4' x 6' tall cab included.

191
Balder Electric Motor
(Part of an entirety) 100 hp, 1760 rpm, 405T frame, 230/460V

192
Ajax Motor Starter
(Part of an entirety) 100 hp, 3 ph, 460V

193
2 Blade Vertical Edger
(Part of an entirety) 30 hp electric motor, (2) 20" blades, both moveable, 6 1/2 x 36" capacity, hydraulic cylinders for blade movement

194
Entirety of Lots 188-193
With 10% raise.

195
Belt Conveyor
21 1/2" belt, 30" pan, 3' x 58', electric drive, includes support steel to ground

196
Belt Conveyor
Electric drive, 8" belt, 3 1/2" sides, 14" x 10', located under edger

197
Belt Conveyor
Electric drive, no belt, 8 1/2" pan, 7" sides, 20" x 20"

198
4 Strand Green Chain
C55B rooftop chain, 13' x 25'6", 33" belt between 2 strands, electric drive

199
Double End Trim Saw
2 moveable heads, electric drive, includes control panel, 30" saws, 8' x 20' overall, 18' max board length

200
Circle Mill Building
Includes all steel posts, roof metal, all wall and rafter materials, dues not include small building with all electrical, includes all catwalk and support steel, not lotted otherwise, main part is 43' x 120", 28' x 90' add-on for green chain, 28 x 30' storage room, 13-13'6" wall height

200A
Break Room Building
16 x 24' main building, 10 x 16' front porch addition, 8' walls mounted on blocks, includes all chairs, benches, sinks, etc. in building

200B
Single Wide Trailer
10' x 16' deck, 13' x 53' main trailer, 8 x 12 front porch, 2 bed 1 bath, includes furniture and appliances

201
Fulghum 48" 6 Knife Chipper
(1st of an entirety) 100 hp electric motor

202
Fulghum Shaker Screen, and Cyclone
(Part of an entirety) 5' x 5' screen, 3' x 3' cyclone including chip pipe from blower to cyclone

203
24" Chip Blower
(Part of an entirety) Needs repair, no drive, includes dual chip chute, 10" x 12" top feed

204
Fulghum Chip Pack Entirety of Lots 201-203
With 10% raise.

205
Vibrating Conveyor
2' x 22', includes chipper infeed section, 19" pan 4" sides, no drive

206
Belt Conveyor
No belt, no drive, 12" x 27' overall, 7" pan and sides

207
Double Head Notcher
9" heads, 6' lift capacity, electric drive, 8'6" x 10' overall

208
Maltros Belt Conveyor
SN: MO923, 50" belt, 64" x 10'

209
Roll Case
20" x 8' air cylinder, 4" x 12" rolls, 12" spacing

210
Double End Trim Saw
No blades, one moveable head, 7' width capacity, electric drive, 6' x 8'

211
Kenwell Jackson Chamfering Machine
Model: 3000E, SN: 791697, 480 V, electric drive, 32" x 7'

212
Bronco Pallet Stacker
Model: 238, SN: 200, 40 x 55 max pallet size, air cylinders, 5' x 5' incline feed, no drive

213
Froedge Deduster
Model: 450 LBD, SN: 23719L, 8" width capacity, 4 1/2" height capacity, electric drive

214
Cornell Slab Saw
24" blade electric drive, 15 x 26 x 13" hydraulic tank, includes control panel hydraulic cylinder on head

215
Single Head Notcher
9" head electric drive 7" width capacity, 42" x 64" overall.

216
Roll Case with Pop Up Transfer
Electric drive, air cylinders on pop-up, 3 1/2 x 25" rolls, 18-24" spacing, 3 strand 5' x 14' pop-up skate rolls, 64" x 16'6"

217
Tower Edger
Set up to run off PTO, 4 x 36" capacity, (2) 14" moveable blades, 3' x 7' infeed dead rolls, 40" x 7' outfeed landing table

218
Hobart Mega-Arc Welder
SN tag is missing, powered by a Ford 4 cylinder gas engine (Model: LSG-4231-6005-A, SN: 17565-T-21-TH), mounted on 4 x 8 x 5' tall frame, has rack for gas/oxygen tanks

218A
Swingine Arm Chopsaw
No drive, includes jack shaft for PTO, 26" blade, 16" x 5' skate roll feed, 8' x 10' x 9'6" overall with frame, manual pull on saw

219
10 Head Drop Trim Saw
No chain on feed, no drives included, set up for electric, no saws installed, fits up to 26" blades, 9'6" x 26' overall, 20' max board length.

220
Steel I Beams
(4) 7" x 16" x 20' long, 1/2" steel, 15 pieces

290
2019 Wood-Mizer LT70 Super Hydraulic Wide Throat Portable Bandmill
(1st of an entirety) VIN: 456D72415KNGA5224, 457 original hours! Powered by a Yanmar 4TNV86 diesel motor rated at 37-56 kw, 64" wide loading arm, debarker mounted on mill, 8-14.5 tires, 2 fenders included, includes extra debarker, extra support legs, and more misc. extra parts, 30 x 68" landing table, includes Wood-Mizer automated setworks, pulls with 2 5/16" ball. Runs flawlessly.

290A
Wood-Mizer Bed Extension
(Part of an entirety) Fits all Wood-Mizers LT28 and up, 3' x 6', Revision Level-A2.02

291
Wood-Mizer Incline Belt Conveyor
(Part of an entirety) SN: 1C5-S06190796A5.02, Electric drive, 24" cleated belt, 8" flared sides, includes control box, and box of mounting bolts, adjustable legs, 42" x 19'6", 208V, single ph.

292
Bands
(Part of an entirety) All Sharpened, (20) 1 1/2", (25) 2", approx. 45 total blades

293
Wood-Mizer BMT 250 Band Sharpener
(Part of an entirety) SN: BMS/337/2019, 110 V plug in, includes control panel

294
Wood-Mizer BMT 200/250 Band Tooth Setter
(Part of an entirety) 115/230 V, includes control panel, in good condition.

295
Wood-Mizer 2 Strand Log Deck with Stop'n'Load
(Part of an entirety) 64" x 14' plus 4' loading arm, hydraulic drive, hydraulic cylinder on loading arm, set up to run off hydraulic hookups on lot 290

296
Wood-Mizer LT70 Entirety of Lots 290-295
With 10% raise.

297
2019 Wood-Mizer EG 200 Twin Blade Portable Edger
(Part of an entirety) VIN: 456A11417KNCB2274, Meter reads: 1443 original hours, Kohler 26.5 hp gas motor, (2) 14" blades - 1 moveable, 26' x 77" skate roll infeed, 3 x 24" infeed capacity, 28" x 10' skate roll outfeed bolt on, 215/75R14 tires, pulls with 2" ball manual blade movement, in great condition.

298
Skate Rolls
(Part of an entirety) (1) 12" x 8' x 38" tall - 2 x 12" rolls, 13" spacing, (1) 2' x 5' - 2 x 20 1/2" rolls, 3" spacing

320
LB Performance G700 Road Grader
SN: 104416, Cummins Diesel Engine (SN: 73630217), Meter reads: 254 hours, 15-19.5 tires, fully enclosed cab with heat/AC, hand controls, runs and operates great.

299
Wood-Mizer Master Entirety of Lots 290-298
With 10% raise.

300
2001 Bobcat 873 Turbo Skid Steer
SN: 514149041
Meter reads: 2,677 hours
Engine: Deutz BF4M Diesel, rated at 53.6 KW
Fuel type: Diesel
ROPS: Fully enclosed cab, needs new door
2 Speed: Yes
Highflow: Yes
Lift capacity: 2,400 lbs
Attachments: 28" x 78" quick attach bucket
A/C: Yes
Heater: Yes

Features and Notes: 12/16.5 tires, in good condition, hand controls.

301
Kubota RTV X900 Utility Vehicle
PIN: A5KB2FDBHKG053555, SN: 53555, 767 hours, 40' x 5' dump bed, rebuilt rear axle 5/23, diesel engine, runs great with no issues. Has title

302
2012 John Deere 855D Gator
VIN: 1M0855DSECM044487, 999 hours, has 4x4, 44" x 50" dump bed, 1000 lb max capacity for bed, John Deere 3TNV70 motor engine (SN: CH3009D240310), runs and drives good manual dump. Has title.

303
DLA 1979 Forklift
Model: ACP-60-B-PS, SN: 110535, meter reads 474 hours, 6000 lb capacity, 3-stage, 80" tall mast, no sideshift, gas powered, 7.0 x 15-5.5 solid tires on front, 7.5 x 10-5 solid tires on rear, 5 x 40" forks, not running, condition unknown.

304
2005 CAT 924G Wheel Loader
SN: 9SW01004
Meter reads: 27,472 hours
Engine: CAT 356 (SN: 8XJ01383)
Fuel type: Diesel
ROPS: Fully enclosed cab
3rd Valve: Yes
Center to center of pins: 19.5"
Tire Size: 20.5R25
Attachments: Rockland Grapple forks, 7" x 44" forks, 70" width
Heater: Yes
A/C: Yes
Quick Attach: No

Runs and operates like it should. 
 

305
2016 Komatsu WA 270-7 Wheel Loader
Meter reads 8974 hours, Komatsu diesel engine rated at 154 hp, 20.5R245 tires, has quick attach system, includes JRB forks (64" wide, 6 x 54" forks), bucket not included, fully enclosed cab with heat/AC, radio, digital display, and backup camera, SN: begins with 8110 - rest of the tag is missing. Good running machine

305A
WB Quick Attach Loader Bucket
SN: 24984512, 3 1/2 cubic yard capacity, 3' x 100"

305B
New! Wheel Loader Tire
20.5R25, will fit lot 304 and 305

305C
Craig Wheel Loader Forks*
Pin Through style, SN: 88860, fits Komatsu WA120

305D
Craig Wheel Loader Jib Crane*
SN: 88911, Pin through style, 6-10' long,

309
1988 CAT 963 Track Loader
SN: 21Z01777, CAT 3304 Diesel engine (SN: 12Z24950), meter reads: 11745 hours, hand and foot controls, 22" tracks, 32" x 8' tooth bucket. Good running condition. 

310
2004 John Deere 435 Series II Knuckleboom
SN: WC0435X012216
Meter reads: 6,526 hours
Engine: John Deere 6068 Diesel
Fuel type: Diesel
Continuous Grapple: Yes
Trailer: 2004 Pitts (VIN: 5JYKB39264P041272)
Delimber: None
Bucksaw Hookups: Yes
A/C: Yes
Heater: Yes

Features and Notes: Rotobec grapple, Model: 6606HD, SN: 1250001R2-538783, 6' max width, Fully enclosed cab, Pilot joystick controls, 11R 22.5 tires. Runs great, no issues. Trailer has title.

311
1970 Barko 160A Knuckleboom
SN: 15392
Meter reads: 6,565 hours
Engine: Detroit Diesel 351
Fuel type: Diesel
Continuous Grapple: Yes, 64" max width
Trailer: No
Delimber: No
Bucksaw Hookups: No
A/C: No
Heater: No

Features and Notes: Pilot joystick controls, self-propelled. Overall dimension 24' long x 8' wide x 15' tall, 17.5-25 tires, starts and runs strong, operates as it should. Trailer does not have a title, bill of sale only

316
CAT D6H Series II Crawler Dozer
Meter reads: 9,877 hours, hand and foot controls, 36" tracks, CAT diesel engine, 12'6" 4 way blade, serial tag is missing. Good running machine that is ready for work

320A
Galion Road Packer
Model: S4-6B, SN: WD81355, Dresser 4 cylinder diesel engine, 32 x 40" rear drum, 48 x 40" front drum, 9.0-20 tires, not running condition

322
2005 CAT 420D Backhoe
PIN: CAT0420DPBLN12747, meter reads: 5200 hours, 19.5-24 tires on rear, 320/80-18 tires on front, CAT diesel engine (SN: CRS25257) has quick attach system, includes quick attach forks (5" x 54" forks, 5' wide), includes quick attach bucket, 32" x 88", includes 2" excavator bucket with 5 teeth. In good running condition 

326
Hesston 55-56 LM108 Tractor
SN: 078828
Meter reads: 5,562 hours
Engine: Fiat 8035-06
Fuel type: Diesel
Transmission type: 4 speed manual
Drive: RWD
Rear PTO: Yes
3 Point hitch: Yes

Features and Notes: Has auxiliary hydraulic hookup in back 540/1000 PTO, starts right up and runs good, 14.9-28 tires on rear, 9.5-15 tires on front.
 

327
White 255-82008 Tractor
SN: 285848421
Meter reads: 2,391 hours
Engine: White Diesel (SN: 4009554)
Fuel type: Diesel
Transmission type: 6 speed manual
Drive: 4WD
Rear PTO: Yes
3 Point hitch: Yes

Features and Notes: 18.4-26 tires on front, 20.8-38 on rear, can be used with duels, has 6 hose auxiliary hydraulic bookup, starts and runs good.
 

328
White 211-83050 Tractor
SN: 303610436
Meter reads: 8,398 hours
Engine: Diesel Engine (SN: TU70018U734258L)
Fuel type: Diesel
Transmission type: 6 speed manual
Drive: RWD
Rear PTO: Yes
3 Point hitch: Yes

Features and Notes: 16.9-28 tires on front, 18.4-38 on rears setup for duels, has 6 hose auxiliary hydraulic hookup, starts and runs great.
 

329
White 255 Tractor
Meter reads: 4,227 hours
Engine: White Diesel (SN: 4006435)
Fuel type: Diesel
Transmission type: 6 Speed manual
Drive: 4WD
Rear PTO: Yes
3 Point hitch: Yes

Features and Notes: 11-16 tires on front, 480/80R38 on rear, setup for duels, 4 hose auxiliary hydraulic hookup, starts and runs good.
 

329A
White 155-22007 Tractor*
SN: 274994-415
Meter reads: 4,144 hours
Engine: White (SN: 4004263, Model: D5000TX9-155
Fuel type: Diesel
Transmission type: 6 speed manual
Drive: 2 RWD
Rear PTO: Yes
3 Point hitch: Yes

Features and Notes: 20.8R38 tires on rear, set up for duals, 11.0-16 tires on front, starts and runs strong
 

330
McCormick Farmall H Tractor
SN: 74191-X1
Engine: 4 cylinder
Fuel type: Gas
Transmission type: 5 speed manual
Drive: RWD
Rear PTO: Yes
3 Point hitch: No

Features and Notes: 1815 rpm on idle, needs battery, does not start, new seat, 15.5-38 tires on rear, 6.0-16 tires on front.
 

331
2006 John Deere 7520 Tractor
SN: RW7520R051703
Meter reads: 4,520 hours
Engine: John Deere 6.8L Power Tech
Fuel type: Diesel
Transmission type: Power-Shift
Drive: 4WD
Rear PTO: Yes
3 Point hitch: Yes

Features and Notes: 150 hp, 380/85R28 tires on front, 460/85R38 tires on rear, fully enclosed cab with air ride seat, Heat/AC, digital display, runs strong, good tractor.
 

332
John Deere 6310 Tractor
SN: L06310M272389
Meter reads: Meter is blank. Aprox. 2700-2800 hours per previous owner
Engine: John Deere 4045 (SN: CD4045T587090)
Fuel type: Diesel
Transmission type: Power Shift
Drive: 4WD
Rear PTO: Yes
3 Point hitch: Yes

Features and Notes: 99 hp, 380/85R24 tires on front, 18.4-34 tires on rear, auxiliary hydraulic hookups, open cab, starts and runs strong, great tractor.
 

333
John Deere Model 60 Tractor*
SN: 6060776
Fuel type: Gasoline
Transmission type: 6 speed manual
Drive: RWD
Rear PTO: Yes
3 Point hitch: No

Features and Notes: Has power steering, 13.6-38 tires on rear, 6.0-16 tires on front, does not run.
 

334
John Deere Model A Tractor*
SN: 430999
Fuel type: Gasoline
Transmission type: 2 speed manual
Drive: RWD
Rear PTO: No
3 Point hitch: No

Features and Notes: Has drawbar, 12.4-38 tires on rear, 5.5-16 tires on front, does not run
 

335
John Deere 5830 Silage Chopper
John Deere 6619 Diesel (SN: RG6619A055436), meter reads: 1387 hours, fully enclosed cab with heat/AC, 14.9-24 tires on rear, 23.1-26 tires on front, extra counter weight on rear, John Deere chopping head (SN: FORBMDX750156), Does not include Kemper Corn Head. This chopper was recently gone thru and is field ready. Great unit.

335A
Kemper Champion 330 Corn Shopping Head*
10' Wide, Was used on Lot #335,Freshly gone through by shop

335B
John Deere Kernel Processor Head*
SN: E000KPX783143, 7' long, 2' wide infeed, Fully rebuilt by shop, Used for less than 15 acres since rebuild

335C
John Deere 5830 Silage Chopper Entirety of Lots 335-335B*
With 10% Raise to Open the Bid

336
John Deere 5830 Silage Chopper
PIN: E05830X927170, John Deere 6619 engine (SN: RG6619A061234), meter reads: 4,267 hours, 14.9R 24 tires on rear, 750/55R 26 tires on front, fully enclosed cab with heat/AC. Field ready.

336A
John Deere 80" Hay Chopping Head*
SN: E0RBMDX926915, Was used on Lot #336, Was just fully gone through by shop

337
John Deere 4 Bottom Plow
Model: A1450, SN: 124604, 24" plow bottoms, 18" discs, 3 pt. hitch and hydraulic hookups, 11L-14SL tires, 19' long overall

337A
Hay Tetter Rake
Model: RCS8, pulls pin through hitch, hydraulic hookkups, hydraulic cylinder for control arms, (9) discs-56", 19' wide when folded down

338
Bush Hog Disc*
Hydraulic hookups and pin-through hitch, hydraulic cylinders for disc control, 14' x 22' wide when folded down, 20" discs, 11L-15 8 ply tires

338A
Cultivator*
Hydraulic hookups and pin through hitch, hydraulic cylinders for controls, 16 x 54" rolls, 12.5L-15 tires, front 2 rolls need repaired and reinstalled, 12' x 23' wide when folded down

339
80" Brush Hog
SN: 028-8008, 3 pt. hitch, runs off PTO, has stump jumper, hydraulic hookups,

339A
80" Brush Hog
SN: 20902, 3 pt. hitch, runs off PTO, hydraulic hookups, has stump jumper

339B
2013 Vicon Spreader
Model: PS225, SN: VN2160301784, 3 pt. hitch, runs off PTO, holds up to 385 kg

339C
Massey Ferguson 2-Bottom Plow
SN: 248-013541, 3 pt. hitch, 18" plow bottoms

339D
Bush Hog Scraper Blade
Model: 100, SN: 12-10327, 3 pt. hitch, hydraulic hookups, 18" x 9' blade

339E
Woods 75" Brush Bull*
Model: BB720, SN: 859885, 3 pt. hitch and PTO hookup

339F
Bale Spear*
44" long spear

339G
Century 200 Gallon Sprayer*
3 pt. hitch and hydraulic hookup, (4) 90" arm sections

339H
Farm King Grading Rake*
3 pt. hitch, 74" wide, manual angle adjustment

339I
John Deere Lawn Sweeper*
44" wide, pin through hitch for lawn tractor

339J
Bobcat Sweeper*
Standard quick attach plate, hydraulic hookups need repair, 4' x 5' wide

339K
Frontier Spreader*
SN: 1XFSS20BAC0297751, 3 pt. hitch, PTO hookup, 3' wide at top, 28" tall

339L
Spreader*
3 pt. hitch, PTO hookup, 4' wide at top, 3' tall

339M
Snow Blade*
Standard skid steer quick attach plate, 90" wide, hydraulic hookup for blade angle

339O
John Deere Roto-Tiller*
3 pt. hitch and PTO hookup, 80" wide, needs repair

339P
Double Deck Brush Hog
Mounts with belly PTO plate, (1) 64" and (1) 54" deck, hydraulic hookups, includes hydraulic tank, needs repair

339Q
Hydraulic Tanks with Pump
(2) 2' x 2' tanks, pump and hose valves mounted on 1 tank

339R
Jeep Hood
Fits 1975 model Jeep

340
New Holland 354 Feed Mixer
Runs off PTO, pulls with pin through hitch, 31 x 13.5-15 tires, holds up to 5600 lb at 56 lb/bushel, fold up augers, works as it should

341
2003 Mack Dump Truck
VIN: 1M2AG10C03M005353
Meter reads: 604,232 miles
Engine: Mack A1 460 (SN: 201435) rated at 460 hp
Transmission: Maxi Torque 8 speed manual
GVWR: 62,000 lbs
Front axle rating: 18,000 lbs
Rear axle rating: 22,000 lbs
Heat/AC: Yes
Wet kit: Yes

Features and Notes: Air ride seat, starts and runs strong, Beau-Roc. SN-DL324865, 8' x 18' x 5' dee, Tri-Axle 11R24.5 tires on rear, 385/65R22.5 on front. Well maintained truck that is road ready. Has title

342
1991 5 Ton 6x6 Military Truck
VIN: 23704542
Meter reads: 8,778 miles
Engine: Cummins Diesel
Transmission: 5 speed automatic
Heat/AC: No
Wet kit: No

Features and Notes: 92" x 14' flatbed with 14" fold down sides, 14R20 all around.

339N
Bobcat Packer*
Standard quick attach plate, hydraulic hookups, 2' x 4' roller

343
White RBM64G Semi Truck
VIN: G9GCAAA852161
Meter reads: 386,649 miles
Engine: 6 cylinder diesel
Transmission: 8 speed Eaton Fuller
GVWR: Unknown
Heat/AC: No

Features and Notes: 11R24.5 tires, has air brake lines, does not start or run. Has title

349
1973 Seagrave Ladder Truck
Model: SR20T86, SN: B73161, automatic transmission, 51583 miles, air brakes, does not run, 1 - 32' ladder, 1- 45' ladder, approx. 128' long main ladder. No title, bill of sale only

349A
American Lafrance Fire Truck
Does not run, selling as parts machine, meter reads 28,443 miles, automatic transmission. No title, bill of sale only

344

351
Sullair Portable Air Compressor
Model: 185-DRO-JD, SN: E0A117549, 125 mas psig, John Deere 4039DF engine (SN: CD4039D212219), diesel fueled, meter reads 540 hours, reel of hose mounted on front pulls with pintle hitch, 215/75R15

352
1974 Fruehauf Chip Trailer
VIN: HPR472383, 68000 lb GVWR, 40' long, 92" inside width, 97" inside height, 11R22.5 tires, includes spare tire and 3' 6 tooth backhoe bucket. Has title

353
1974 Fruehauf Chip Trailer
VIN: HPS494725, GVWR: 68000 lb, 40' long, 11R22.5 tires, 93" inside width, 95" inside height. Has title

365
Hydraulic Tension System for Resaw
Includes reservoir, pump and hoses

354
Mobile Office Trailer
VIN: AI19015A, Pulls with 2 5/16" ball, 8' x 32' x 7' high, single axle, has main door and overhead door, includes all contents. Has title

376
Armstrong Stretcher Roll
SN: 16674, Model: 3-60-C, electric drive

355
Dump Bed
8' x 16' x 54" deep, includes main cylinder for dump

356
Shop-Built Boom Crane Gooseneck Trailer*
VIN: WV-152-285, 7'6" x 24' overall, dual tire axle with LT 215/85R16 tires, toolboxes on sides, Versalift crane - 300 lb capacity, hydraulic controls (model: V025-GS, SN: J19111), 25" diameter x 44" deep fiberglass bucket

356A
Aluminum Dump Bed
8' x 18' with 64" sides, in good condition, no cylinder included

357
Flatbed Trailer
285/75R 24.5 tires, 8' x 43', wooden deck, in rough condition, VIN tag is missing, includes tie down straps. No title, bill of sale only

374
John Deere X595 Riding Lawn Mower
60" mowing deck, no issues, John Deere diesel engine (SN: CH3010D110661), hour meter is fogged over, hydrostatic drive

375
Newman G-200 Knife Grinder
Electric drive, 20" max knife length

377
Welding Rods
Antique fridge filled with welding rods and parts

378
Chipper knives
100 or more knives, counter knives, holders, parts

383
Steel Cables
4 pieces with loops on each end

379
Newman G-132 Knife Grinder
32" knife holding bed, 7' long overall, electric drive

380
Yates American Planer knives
2" x 15" x 5/32", 30-40 sets, approx. half are in like new condition

381
Circle Saw Wrenches
For setting teeth

386
Cutting Torch Set
Includes cart, tanks, leads, gauges, and torch

382
Steel Sawhorses
4' x 30" tall, 32" wide at base

384
56" Circle Saw
B8 style, 2" arbor

385
56" Circle Saw
B8 style, 2" arbor, damaged

387
Assorted Saw Blades
(10) 26", (4) 30",(1) 26", (13) 18-20", some broken, need sharpened

388
Edger Blades
(12) 20", (7) 18", 4" and 1 1/2" arbors, need sharpened

391
Loader Rims
8 lug, 14" x 27.5"

389
22" Blades
23 total, most in good condition, will need sharpened

390
Tire Chains
14" wide

392
Husk Wrenches
Includes all wrenches hanging from wall as pictured

394
Pacific Saw and Knife Circle Saw Grinder
64" max saw size, 110 plug in, shavings bag collector, 10" grinding wheel

393
Shelf with Parts
16" x 4' x 4' tall

395
Cutting Torch Parts
2 torches, goggles, 1 new tip, used tips, tip cleaners, 2 ignitors

396
2 Levels
(1) 48", (1) 78"

397
Steel Table with Tools
38" x 78" x 37" tall, assorted hand tools, files, wrenches, sockets, assorted, fasteners

398
Debarker Parts
(2) heads, no teeth, 10 groove 12" pulley on shaft

399
Floor Jack
SN: 548185, 8000 lbs capacity, condition unknown

400
Bablor 6" Bench Grinder
SN: F588, 110 plug in, 3600 rpm,

401
Oregon Chainsaw Sharpener
SN: 265791, Model: 511A, 110 plug in

402
Steel Work Bench with Contents
30" x 14' x 38" tall, includes all contents of bench and contents on wall and shelf above bench, electric motors, bearings, cylinders, hand tools, air impact

403
5" Wilton Bench Vise
18" long when closed

404
Delta Drill Press
SN: 5752, 110 plug in, 12" x 12" tabletop

408
Steel Cabinet
Includes all contents, 5' x 42" x 78" tall, hand tools, chain parts, electric drill, hydraulic parts, sprocket

405
Anvil
4.5" x 14" flat surface

409
Steel shelf with All Content Bearings
3' x 15' x 6' tall, includes all items on and under shelf, electric motors, cylinders, pulleys, hydraulic pumps, and motors

406
60" Pipe Wrench

410
Pallet of Chain
20 rolls of H78 chain, 10' per roll, 10' of brand new roller chain

407
36" Pipe Wrench

411
Fire Hoses
6 rolls of 3" hose

412
Electric Wire
Includes all assorted wire as pictured

413
Water Pump
Honda GX120 gas motor, 2" hose with filter, includes Ross valve

414
Air Compressor Frame
Includes tanks, frame, and pulley, no motor or compressor

416
Shelf
13" x 30" x 66" tall

417
Assorted Saw Blades
14" to 20", 7 new 20" edger blades

418
Fastener Organizer
9" x 34" x 39" tall, includes all parts in organizer and new bearings beside shelf

419
Hydraulic Hoses
32" x 4' x 2' deep box, lots of new hydraulic hoses

415
Portable Hammering Bench
10" x 5' x 35" tall

420
Shelf with Contents
Lights, electric motor, welding mask, saw blades, assorted parts

421
Troy-Bilt Garden Tiller
Comes with extra 5 1/2 hp Honda motor, powered by 11 hp Briggs and Stratton motor, condition unknown

422
Trash Pump
1 1/2" Generae pump, CW15K Water pump, 79 cc motor, includes feed hose and fire hose, also includes 3 pt. hitch frame

423
3 Part Washers
110 V plug in

424
7500 Watt Generator
420 cc motor, Model: SP-GG750E, Homelite 8" blower with 3.5 hp gas motor

425
Ceiling Lights and Bulbs

426
Spools of Rope
(1) 17" x 17" spool with 3/4" rope, (2) 2' x 2' spools with 3/4" rope

427
Pallet of Misc. Hardware*
(2) 3 ton jack-stands, screws, nails, bolts, door hardware, castors

428
Pallet of Misc. Lighting*
Fixtures and parts

429
Pallet of Tools *
2000 psi-4 hp pressure washer, 2 1/2" - 3 1/2" fire hoses, Craftsman 21cc-7" edger, 5 hp, 125 max psi electric air compressor

430
Pallet of Misc. Hardware*
Plumbing fittings, thermal blankets, tie down tools, washing and detailing supplies

431
Pallet of Lights*
(6) Ceiling lights

432
Pallet of Misc. Hardware*
Springs, detailing supplies, 220V, make to female adapters, assorted trailer lights

433
Pallet of Misc. Hardware*
Insect traps, cleaning supplies, plumbing parts, spray paint

434
Pallet of Misc. Hardware*
Tail lights, tire covers, spray paint, insect screens, auto parts and fluids

435
Pallet of Misc. Hardware*
Plastic mats, clamps

436
Crate of Assorted Belts*

437
Crate of Assorted Belts*

438
Pallet of Misc. Hardware*
Clamps, pulleys, wire brushes, home security kits, paint roller, mesh aluminum, car grills, locks, sink fittings, fasteners, gate latches

439
Steel Cutting Saw and Plate Compactor*
Wacker 135 lb upright plate compactor, Stow True 14" metal cutting chop saw

440
Adjustable Skate Rolls*
2' x 7', extendable, removable legs

454
Assorted Rough Cut Lumber
3/4 - 3" thick, 4" - 20" wide, 6' - 20' long, includes all lumber as pictured, air dried

441
Adjustable Skate Rolls*
2' x 7', extendable, removable legs

442
Pallet of Misc. Hardware*
40" - 48" pipe clamps, wall heater, window AC unit, 110 V work lights, pipe threader fittings

443
Tank Cart and Sander*
28" x 5' cart-holds up to 24" diameter tanks, Clarke Super 7" sander-110 plug in, includes case

444
Pallet of Misc. Hardware*
Sink and plumbing parts, steel wire rope, paint sprayer, hand tools, shower and tub parts, toilet parts, assorted fasteners, door knobs and locks, automotive fuses

445
Pallet of Misc. Hardware*
Shower and tub parts, toilet parts, assorted fasteners, door knobs and locks, automotive fuses

446
Bolt Organizers*
(14) 13" x 16" x 13" organizers, (5) 10" x 13" x 7" organizers, all loaded with assorted fasteners

447
11R22.5 Tires*
(5) tires, mounted on steel rim, (4) in good condition, (1) almost gone

448
Fuel Jugs and Carts*
(7) 5 gallon jugs, (1) 2.5 gallon jug, (1) 2 gallon jug, assorted shop carts

449
Scaffolding*
Includes castors, supports, platform sections, and legs

449A
Hand Tools*
Assorted shovels, concrete tools, post hole digger, chisels, pry bars

449B
Assorted Threaded Steal Rods*
6' long sections, 3/16" to 1/2" rods

449C
Sumner Manual Pallet Truck*
650 lb capacity, 22" x 28" forks, hand crank, has stabilizers

449D
Sumner Manual Pallet Truck*
Model: 720, SN: 720-5110, 750 lb capacity, 22 x 26" forks, needs repair

450
Assorted Rough Cut Lumber
3/4 - 3" thick, 4" - 20" wide, 6' - 20' long, includes all lumber as pictured, air dryed

450A
Rough Cut Lumber*
Approx. 6800 BF, 6-12" wide x 16' long, 1 3/4" thick

450B
Rough Cut Lumber*
Approx. 4,600 BF, 6-12" wide x 16' long x 1 3/4" thick

450C
Rough Cut Lumber*
7' long, 5/8" thick, 5-11" wide, approx. 1600 BF

450D
Rough Cut Lumber*
6-12" wide x 10' long x 1 3/4" thick, approx. 2100 BF

450E
Rough Cut Lumber*
6-12" wide x 1 3/4" thick x 10' long, approx. 3000 BF

450F
Rough Cut Lumber*
6-12" wide x 10' long x 1 1/2"-2" thick, approx. 3000 BF

450G
Rough Cut Lumber*
6-12" wide x 10' long x 1 1/2"-2" thick, approx. 3000 BF

450H
Rough Cut Lumber*
6-12" wide x 10' long x 1 1/2"-2" thick, approx. 4600 BF

451
Assorted Rough Cut Lumber
3/4 - 3" thick, 4" - 20" wide, 6' - 20' long, includes all lumber as pictured, air dryed

452
Assorted Rough Cut Lumber
3/4 - 3" thick, 4" - 20" wide, 6' - 20' long, includes all lumber as pictured, air dryed

453
Assorted Rough Cut Lumber
3/4 - 3" thick, 4" - 20" wide, 6' - 20' long, includes all lumber as pictured, air dryed

455
Pallet of Metal Trim
6" wide x 10' long metal ridge cap, approx. 70 pieces

455A
Pallet of Auto Parts
Muffler, fluids, jack stands, door hinges

455B
Pallet of Misc.
Microwave, table saw, RV accessories, work lights, hood scoops

455C
Lawn Mower Tires
(1) 205/65-10 with rim, (1) AT24x8-11, (1) AT24x10-11, (1) lo-lug 16 1/2" rim, (1) 6 lug 17 1/2" rim

456
Pallet of Soffit and Gutters
Vented vinyl soffit, soffit trim, vinyl gutters and fittings

457
Pallet of Metal Trim
Assorted metal trim

458
Pallet of Metal Trim
Vented soffit, ridge trim, F + J channel, fascia

459
Pallet of Vinyl Gutters and Trim
Vented soffit, J channel, gutters and fittings

460
Pallet of Metal Gutter and Trim
Vented soffit, corner roof trim, fascia, J channel, gutters

461
Pallet of Siding and Trim
Vinyl siding and soffit, metal corners and drip edge, Fascia

462
Pallet of RV Parts
TV antenna, RV jacks, sway control bar fuel tank

463
ATV Tops
New 11 pieces

464
Pallet of Misc.
Coolers, vacuum, wire, foam rolls, pipe threader stand, Troy-Bilt sidewalk edger

465
Utility Cart
3/4 ton wheel dolly

466
Shelves and Peg Board
(1) 30 x 36 x 24" tall, (1) 30 x 48 x 22" tall, 3' x 4' sections of peg board, approx. 40 pieces

467
Pallet of Tools
60 gallon air tank, hanging lights, screws, PVC pipe heater,

468
Pallet of Tools
Banding cart, chicken wire, wire shelf, toolbox

469
Pallet of Misc.
Cleaning supplies, light bulbs, exhaust parts

470
Pallet of Misc.
ATV oil, welding leads, chalk for chalk lines, misc. hardware, mixing oil, mirror parts