Newberg Estate Auction
Listing ID#: 1492460

Auction Location

Newberg, OR 97132
Auction Dates and TimesSALE IS COMPLETED
Bidding Starts: Monday Apr 10
Bidding Ends: Tuesday Apr 18
Auction Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
Auction Sales Co.

Website: www.auctionsalesco.com

GoToAuction.com ID#: 8758
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Auction Terms & Conditions - REGISTRATION & BID NUMBER ACCEPTANCE: By registering and accepting a bid number online, the bidder acknowledges they have read, understand, and agrees to be bound by the terms and conditions of Auction posted online in this document or available at auction site. When you sign up for a bidder number your credit card number will be retained and charged for your purchase(s), unless previous arrangements with management are made prior to auction day. By clicking the accept button online, you enter into a binding legal agreement with Auction Sales Co., LLC. Auction Sales Co., LLC is providing Internet online bidding as a service to Bidder. Bidder acknowledges and understands that internet service may or may not function correctly the day of the auction. Under no circumstances shall Bidder have any kind of claim against Auction Sales Co., LLC or anyone else if their Internet service fails to work correctly before or during the auction. Internet bidders who desire to make certain their bid is acknowledged should use the Pre bidding feature and leave their maximum bid prior to the auction closing. Registered bidders are responsible and liable for all bids they place - intentional or accidental. Lots will have a "STAGGERED" and "SOFT CLOSE". You will be notified by email that you are the winning bidder. Email invoices will be sent as soon as the Auction closes. What is a "STAGGERED CLOSE"? The lots do not close all at the same time. Lots will have a staggered closing using a mixed sequence. Follow the clock to the right of each lot to know the exact closing time of a particular lot. What is a "SOFT CLOSE"?? If a bid is submitted and confirmed during the last 2 minutes before closing, then the time will be extended on that lot by 1 minute. This will continue until no more bids are placed on the lot. GENERAL TERMS OF AUCTION: It is the bidder's responsibility to preview and inspect the items prior to bidding/buying and determine the condition of the item they are bidding on. All articles of merchandise are offered "As Is, Where Is" by lot, individually or in groups as announced by the auctioneer at time of auction. No claim will be considered for allowance adjustment or rescission of any sale based upon the failure of the property to correspond to any particular standards or expectations of the buyer. It is important that the buyer avail themselves of the inspection periods. All items sold "AS IS" meaning the bidder is responsible for due diligence in inspecting all items. Auction Sales Co., LLC will pass on any information, good or bad, that the seller gives to us in describing the items. Auction Sales Co., LLC is not responsible for incorrect listing information, if any. However, it is up to buyer to determine the condition of the item they are bidding on. All sales are final. When a bidder is awarded the winning bid on an item, that bidder instantly becomes the new owner of that item and is completely responsible for that item. AUCTION SALES CO., LLC RESERVES THE RIGHT TO WITHDRAW, CHANGE OR RE-CATALOG ITEMS IN THIS AUCTION. ALL MEASUREMENTS ARE APPROXIMATE. BIDDING - Do not bid unless you agree to ALL of the terms and conditions posted herein. By bidding you are acknowledging agreement with all of the terms and conditions included herein and else where on our website. The highest Bidder shall be the Buyer and no Bidder shall retract their bid. A Buyer is deemed to have accepted an item or lot when they make their bid. A successful bid at auction constitutes a legally binding contract of sale. All sales are final. The acceptable bidding increments are established and controlled by the Auctioneer. Any dispute arising as to any bidding shall be settled by Auctioneer at his sole discretion, and Auctioneer may put the lot in dispute up for sale again. Auctioneer reserves the right to refuse any bid, which it considers to be an insignificant advance over the preceding bid. Certain items in the sale are being offered subject to reserve, which is the confidential minimum price below which such lot will not be sold. The Auctioneer has the right to place a bid for the consignor up to the Lot's reserve. Lots that fail to meet the reserve price may be represented for sale in another auction. Auction Sales Co, LLC reserves the right to allow any and all employees to bid. Seller and/or Auctioneer reserve the right to reject a Bidders registration application and/or bids for any reason in their sole discretion without prior contact to the Bidder. Bidders who bid from off site and are not present at the live auction or preview understand and acknowledge that they may not be able to inspect an item as well as if they examined it in person. PAYMENT: Your credit card number will be retained for this sale only, and charged for your purchase(s) at the close of the auction, unless prior payment arrangements have been made with Auction Sales Co., LLC staff prior to the close of the auction (auctionsalesco@gmail.com) An additional 3% processing fee will be charged for any credit card used. We accept: Visa, Mastercard, American Express and Discover. Purchases cannot be removed from the auction site until paid for in full. If paid for with non-certified funds, items will not be released until funds clear our bank. Payment in full is due prior to pickup. Auction Sales Co., LLC accepts cash, credit cards, wire transfers and cashiers checks. BUYERS PREMIUM: Premium will be added to EACH LOT purchased at the following rate: Items selling up to $5,000.00 - 10% Items selling from $5,001.00 and above - 5% REMOVAL OF ITEMS/SHIPPING & HOLD HARMLESS: The buyer is solely responsible for removal and shipping of their own purchases. Items may be picked up by appointment only. All items must be picked up by the dates listed in this auction's details. ANY ITEM(S) NOT PICKED UP OR PAID FOR BY THE DATES LISTED IN THIS AUCTION'S DETAILS, WITHOUT PRIOR ARRANGEMENTS BEING MADE WITH MANAGEMENT OF AUCTION SALES CO, LLC, WILL BE DEEMED ABANDONED AND WILL BECOME THE PROPERTY OF AUCTION SALES CO. Successful bidders will be required to schedule an appointment for their load out. Successful bidders will be sent an email with their invoice which will include a link to sign up for a load out date and time. PURCHASER SHALL MAKE HIS OWN ARRANGEMENTS FOR INSURANCE COVERAGE FOR ALL ITEMS PURCHASED. The purchaser hereby agrees to indemnify and hold harmless Auction Sales Co., LLC and the seller, against any and all liability, loss, costs, damages and other expenses arising from attending the auction or the loading out of equipment by Auction Sales Co., LLC on the purchaser's behalf. All lots must be removed within the stated load out schedule. Any item not picked up or paid for by during these dates will be deemed abandoned and will become the property of Auction Sales Co., LLC. Items will be removed at purchaser's sole cost and risk, and only in a manner approved by auctioneer. Prior to the commencement of loading, dismantling, rigging or cutting or any operation affecting buildings or land, purchaser shall furnish certificates, satisfactory to auctioneer, holding auctioneer harmless for any claims concerning damage or injury to persons or property arising out of any such acts. All equipment used in connection with removal, shall itself be removed with the purchased lots. All buyers, customers, hauling companies, and their agents release Auction Sales Co., LLC, it's employees, agents, and sellers from all liability during the loading and hauling process. Auction Sales Co., LLC will not be held liable for any damages. It is the sole responsibility of the buyer to tie-down loads appropriately and to DOT regulations. All rights, privileges and powers reserved or granted to Auction Sales Col, LLC in these Terms of Sale shall be deemed reserved and granted to Auction Sales Co., LLC's employees, advertising representatives, and all owners for whom the lots are being sold. Auction Sales Co., LLC does not accept responsibility for the failure of any equipment sold to meet the safety standards on classifications of equipment by the Department of Labor Safety and Health Regulation, Federal OSHA or the Environmental Protection Agencies. It is the express responsibility of the buyer to determine what safety equipment must be in service on any machinery purchased and to comply with these regulatory requirements prior to using any equipment, machinery or vehicles purchased from Auction. In the event Auction Sales Co., LLC is required to employ an attorney to enforce any term of the agreement, purchaser agrees to pay reasonable attorney's fees, in addition to all court costs. Every person at the auction site before, during and after the auction acknowledges that he/she is there at his/her own risk with notice of the condition of the premises. No person shall have any claim against the Auctioneers, their agents, employees, sellers, owners, or principals for any injuries sustained or for any damages to or loss of property which may occur from any causes whatsoever.
Listing Information
Flatbed trailer, tractor implements, yard & garden equipment, log splitter, woodworking tools, hand tools, shelving, fishing & outdoor equipment, wine barrels, vintage collectibles and more!

1
PLEASE READ & UNDERSTAND ALL TERMS & CONDITIONS
Terms & Conditions can be found in the auction details section. Please read and understand your responsibilities as a buyer. MEASUREMENTS ARE APPROXIMATE BUYER'S PREMIUM: Premium will be added to EACH LOT purchased at the following rate: Items sellin...

2
PREVIEW DATES & TIMES
Monday, April 17th 3-7pm PDT Tuesday, April 18th 10am-2pm PDT No EARLY arrivals please. 16325 NE Kings Grade Newberg, OR 97132

3
LOAD OUT INFORMATION - OFF SITE AUCTION
ALL ITEMS LOCATED IN NEWBERG, OREGON. Load out Wednesday & Thursday April 19th & 20th 9am-4pm - by Appointment Only If these load out dates do not work for you - DO NOT BID No Shipping Offered If you purchase large items - BRING LOADOUT HELP WITH YO...

4
PAYMENT INFORMATION
PAYMENT: Credit cards used to register for this auction will be charged at the close of the auction unless alternate payment requests have been made with our office prior to the close of the auction. Alternate payment requests can be emailed to aucti...

5
2001 Big Tex 18' Utility Trailer
Tandem axle with ramps, electric jack, in-floor tool box, 8-lug aluminum wheels, spare tire. Measures approximately 18'x7'. VIN 16VCX182911333303

6
Jet Heavy Duty Wood Shaper
Model JWX-25CS, 3HP 230V, S/N 0010168.

7
Shop Fox 8" Jointer
Model W1741, 3HP 220V, S/N WJ08-1585.

8
Jet Drum Sander
Model 22-44 PLUS, 1-3/4HP 115V, S/N 131211580.

9
Delta Rockwell 10" Unisaw Table Saw
Model 34-450, 220V, S/N E15112. With workbench and drawers.

10
Milwaukee Heavy Duty 8" Panel Saw
Model 6480-20, 3-3/4HP 120V, S/N 697VB907210046.

11
Craftsman 10" Radial Arm Saw
Contractor Series, Model 113.196380, 3HP 120/240V, 16" slide, S/N 98042P0019.



14
Large Wood Workbench w/Casters & Stabilizers
Measures approximately 96"x48"x36".




22
Speeco Vertical/Horizontal 34 Ton Log Splitter
Model LS401224N with Briggs & Stratton 10.5HP engine. Always stored under cover and has only used non-ethanol gas.

23
Troy-Bilt Pro Line Rear Tine Rototiller
Model 3217233 21A-644H766, S/N 1B234G20089, Briggs & Stratton engine. Has only used non-ethanol gas.

24
Mantis Tiller/Cultivator
Has only used non-ethanol gas.

25
John Deere 345 Riding Mower w/48" Deck
1,140 hours, 20HP liquid cooled, hood is damaged.

26
Cosmo 400 P-Model Fertilizer Spreader
PTO drive, S/N 0314251/2014





31
Fuel Tank w/Manual Pump & Filter
Approximately 60 gallon capacity, measures approximately 14"Wx48"Lx27"H. Previously contained diesel.

32
3-Section Roller
Measures approximately 12' wide, each drum 48".


34
Ferguson 2-Bottom Plow
Type 14-AO-28, No. 75524.





39
Dragon Products 3-Point Box Scraper
Measures approximately 4-1/2' wide.


41
Pull-Type Roller
Measures approximately 67" wide.



43
Driveway Drag w/Concrete Weight
Measures approximately 5'x7'.


45
Agri-Fab Lawn Sweeper
Model 45-0522, S/N 17026, measures approximately 52" wide.

46
(2) Sets Scaffolding & Tapered Platform
Includes one full structure and extra parts with walkboard plank.

47
Oxygen/Acetylene Torch Set w/Cart
With Airco Gauges and Gasweld torch.



50
Sears/Craftsman 12" Wood Lathe on Cart
1/2HP 115/230V reversible motor.








57





62
Crain Toe-Kick Saw
Model 785, 2-1/3HP




66
(2) Skil Saw 7-1/4" Circular Saws
Skil Saw 7-1/4" Worm Drive Circular Saw HD77 - needs new cord.



69
(2) Heavy Duty 1/2" Drill Motors
Skil Drill Model 64 and Black & Decker 1/2" Utility Power Drill

70
(2) Drill Motors
Craftsman and Black & Decker




































106
Drill Doctor w/Case
Drill bit sharpener.




110
(2) Pneumatic Sanders & Air Chucks
Ingersoll-Rand and Suntech









119
Box of Miscellaneous
Sockets, bits, 1/2" speed handle, etc.

120
Box of Miscellaneous
Hole saws, bit sets, nut drivers, compression tester, etc.

121
Box of Miscellaneous
Grommets, tools, snap setter, wallpaper tools, etc.

122
Box of Miscellaneous
Magnifying glasses, hole punch, flashlight, misc office supplies.






128
Vintage Measuring Tools & Level
Stanley, Johnson, etc.

129
Castered Shop Cart
Measures approximately 24"x36"x32".

130
Castered Shop Cart
Measures approximately 20"x30"x32".

131
Castered Shop Cart
Measures approximately 28"x42"x33".





136
(3) Fans
(2) box fans, (1) oscillating.







143
Miscellaneous Automotive
Jacks, tire chains, tire iron, etc.


145
Fencing Supplies
(2) buckets double-barb staples, fence stretcher, winch, hardware.

146
Dayton Industrial Motor w/Switch & Teel Pump
Dayton model 5K9616, 115/230V, 2HP.





151
Tubing Benders, Pipe Threader, and
Grinding wheel dresser and pipe cutters.



Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Other Sales by
This Company

May 12 - May 22
La Pine, OR



Sponsored Links

Newberg Estate Auction

Auction Sales Co.

Auction Sales Co.


Contact:
Phone:
Sale Location
16325 NE Kings Grade
Newberg, OR 97132
Sale Dates and Times
Sale Terms and Conditions
Auction Terms & Conditions - REGISTRATION & BID NUMBER ACCEPTANCE: By registering and accepting a bid number online, the bidder acknowledges they have read, understand, and agrees to be bound by the terms and conditions of Auction posted online in this document or available at auction site. When you sign up for a bidder number your credit card number will be retained and charged for your purchase(s), unless previous arrangements with management are made prior to auction day. By clicking the accept button online, you enter into a binding legal agreement with Auction Sales Co., LLC. Auction Sales Co., LLC is providing Internet online bidding as a service to Bidder. Bidder acknowledges and understands that internet service may or may not function correctly the day of the auction. Under no circumstances shall Bidder have any kind of claim against Auction Sales Co., LLC or anyone else if their Internet service fails to work correctly before or during the auction. Internet bidders who desire to make certain their bid is acknowledged should use the Pre bidding feature and leave their maximum bid prior to the auction closing. Registered bidders are responsible and liable for all bids they place - intentional or accidental. Lots will have a "STAGGERED" and "SOFT CLOSE". You will be notified by email that you are the winning bidder. Email invoices will be sent as soon as the Auction closes. What is a "STAGGERED CLOSE"? The lots do not close all at the same time. Lots will have a staggered closing using a mixed sequence. Follow the clock to the right of each lot to know the exact closing time of a particular lot. What is a "SOFT CLOSE"?? If a bid is submitted and confirmed during the last 2 minutes before closing, then the time will be extended on that lot by 1 minute. This will continue until no more bids are placed on the lot. GENERAL TERMS OF AUCTION: It is the bidder's responsibility to preview and inspect the items prior to bidding/buying and determine the condition of the item they are bidding on. All articles of merchandise are offered "As Is, Where Is" by lot, individually or in groups as announced by the auctioneer at time of auction. No claim will be considered for allowance adjustment or rescission of any sale based upon the failure of the property to correspond to any particular standards or expectations of the buyer. It is important that the buyer avail themselves of the inspection periods. All items sold "AS IS" meaning the bidder is responsible for due diligence in inspecting all items. Auction Sales Co., LLC will pass on any information, good or bad, that the seller gives to us in describing the items. Auction Sales Co., LLC is not responsible for incorrect listing information, if any. However, it is up to buyer to determine the condition of the item they are bidding on. All sales are final. When a bidder is awarded the winning bid on an item, that bidder instantly becomes the new owner of that item and is completely responsible for that item. AUCTION SALES CO., LLC RESERVES THE RIGHT TO WITHDRAW, CHANGE OR RE-CATALOG ITEMS IN THIS AUCTION. ALL MEASUREMENTS ARE APPROXIMATE. BIDDING - Do not bid unless you agree to ALL of the terms and conditions posted herein. By bidding you are acknowledging agreement with all of the terms and conditions included herein and else where on our website. The highest Bidder shall be the Buyer and no Bidder shall retract their bid. A Buyer is deemed to have accepted an item or lot when they make their bid. A successful bid at auction constitutes a legally binding contract of sale. All sales are final. The acceptable bidding increments are established and controlled by the Auctioneer. Any dispute arising as to any bidding shall be settled by Auctioneer at his sole discretion, and Auctioneer may put the lot in dispute up for sale again. Auctioneer reserves the right to refuse any bid, which it considers to be an insignificant advance over the preceding bid. Certain items in the sale are being offered subject to reserve, which is the confidential minimum price below which such lot will not be sold. The Auctioneer has the right to place a bid for the consignor up to the Lot's reserve. Lots that fail to meet the reserve price may be represented for sale in another auction. Auction Sales Co, LLC reserves the right to allow any and all employees to bid. Seller and/or Auctioneer reserve the right to reject a Bidders registration application and/or bids for any reason in their sole discretion without prior contact to the Bidder. Bidders who bid from off site and are not present at the live auction or preview understand and acknowledge that they may not be able to inspect an item as well as if they examined it in person. PAYMENT: Your credit card number will be retained for this sale only, and charged for your purchase(s) at the close of the auction, unless prior payment arrangements have been made with Auction Sales Co., LLC staff prior to the close of the auction (auctionsalesco@gmail.com) An additional 3% processing fee will be charged for any credit card used. We accept: Visa, Mastercard, American Express and Discover. Purchases cannot be removed from the auction site until paid for in full. If paid for with non-certified funds, items will not be released until funds clear our bank. Payment in full is due prior to pickup. Auction Sales Co., LLC accepts cash, credit cards, wire transfers and cashiers checks. BUYERS PREMIUM: Premium will be added to EACH LOT purchased at the following rate: Items selling up to $5,000.00 - 10% Items selling from $5,001.00 and above - 5% REMOVAL OF ITEMS/SHIPPING & HOLD HARMLESS: The buyer is solely responsible for removal and shipping of their own purchases. Items may be picked up by appointment only. All items must be picked up by the dates listed in this auction's details. ANY ITEM(S) NOT PICKED UP OR PAID FOR BY THE DATES LISTED IN THIS AUCTION'S DETAILS, WITHOUT PRIOR ARRANGEMENTS BEING MADE WITH MANAGEMENT OF AUCTION SALES CO, LLC, WILL BE DEEMED ABANDONED AND WILL BECOME THE PROPERTY OF AUCTION SALES CO. Successful bidders will be required to schedule an appointment for their load out. Successful bidders will be sent an email with their invoice which will include a link to sign up for a load out date and time. PURCHASER SHALL MAKE HIS OWN ARRANGEMENTS FOR INSURANCE COVERAGE FOR ALL ITEMS PURCHASED. The purchaser hereby agrees to indemnify and hold harmless Auction Sales Co., LLC and the seller, against any and all liability, loss, costs, damages and other expenses arising from attending the auction or the loading out of equipment by Auction Sales Co., LLC on the purchaser's behalf. All lots must be removed within the stated load out schedule. Any item not picked up or paid for by during these dates will be deemed abandoned and will become the property of Auction Sales Co., LLC. Items will be removed at purchaser's sole cost and risk, and only in a manner approved by auctioneer. Prior to the commencement of loading, dismantling, rigging or cutting or any operation affecting buildings or land, purchaser shall furnish certificates, satisfactory to auctioneer, holding auctioneer harmless for any claims concerning damage or injury to persons or property arising out of any such acts. All equipment used in connection with removal, shall itself be removed with the purchased lots. All buyers, customers, hauling companies, and their agents release Auction Sales Co., LLC, it's employees, agents, and sellers from all liability during the loading and hauling process. Auction Sales Co., LLC will not be held liable for any damages. It is the sole responsibility of the buyer to tie-down loads appropriately and to DOT regulations. All rights, privileges and powers reserved or granted to Auction Sales Col, LLC in these Terms of Sale shall be deemed reserved and granted to Auction Sales Co., LLC's employees, advertising representatives, and all owners for whom the lots are being sold. Auction Sales Co., LLC does not accept responsibility for the failure of any equipment sold to meet the safety standards on classifications of equipment by the Department of Labor Safety and Health Regulation, Federal OSHA or the Environmental Protection Agencies. It is the express responsibility of the buyer to determine what safety equipment must be in service on any machinery purchased and to comply with these regulatory requirements prior to using any equipment, machinery or vehicles purchased from Auction. In the event Auction Sales Co., LLC is required to employ an attorney to enforce any term of the agreement, purchaser agrees to pay reasonable attorney's fees, in addition to all court costs. Every person at the auction site before, during and after the auction acknowledges that he/she is there at his/her own risk with notice of the condition of the premises. No person shall have any claim against the Auctioneers, their agents, employees, sellers, owners, or principals for any injuries sustained or for any damages to or loss of property which may occur from any causes whatsoever.
Listing Details
Flatbed trailer, tractor implements, yard & garden equipment, log splitter, woodworking tools, hand tools, shelving, fishing & outdoor equipment, wine barrels, vintage collectibles and more!

1
PLEASE READ & UNDERSTAND ALL TERMS & CONDITIONS
Terms & Conditions can be found in the auction details section. Please read and understand your responsibilities as a buyer. MEASUREMENTS ARE APPROXIMATE BUYER'S PREMIUM: Premium will be added to EACH LOT purchased at the following rate: Items sellin...

2
PREVIEW DATES & TIMES
Monday, April 17th 3-7pm PDT Tuesday, April 18th 10am-2pm PDT No EARLY arrivals please. 16325 NE Kings Grade Newberg, OR 97132

3
LOAD OUT INFORMATION - OFF SITE AUCTION
ALL ITEMS LOCATED IN NEWBERG, OREGON. Load out Wednesday & Thursday April 19th & 20th 9am-4pm - by Appointment Only If these load out dates do not work for you - DO NOT BID No Shipping Offered If you purchase large items - BRING LOADOUT HELP WITH YO...

4
PAYMENT INFORMATION
PAYMENT: Credit cards used to register for this auction will be charged at the close of the auction unless alternate payment requests have been made with our office prior to the close of the auction. Alternate payment requests can be emailed to aucti...

5
2001 Big Tex 18' Utility Trailer
Tandem axle with ramps, electric jack, in-floor tool box, 8-lug aluminum wheels, spare tire. Measures approximately 18'x7'. VIN 16VCX182911333303

6
Jet Heavy Duty Wood Shaper
Model JWX-25CS, 3HP 230V, S/N 0010168.

7
Shop Fox 8" Jointer
Model W1741, 3HP 220V, S/N WJ08-1585.

8
Jet Drum Sander
Model 22-44 PLUS, 1-3/4HP 115V, S/N 131211580.

9
Delta Rockwell 10" Unisaw Table Saw
Model 34-450, 220V, S/N E15112. With workbench and drawers.

10
Milwaukee Heavy Duty 8" Panel Saw
Model 6480-20, 3-3/4HP 120V, S/N 697VB907210046.

11
Craftsman 10" Radial Arm Saw
Contractor Series, Model 113.196380, 3HP 120/240V, 16" slide, S/N 98042P0019.



14
Large Wood Workbench w/Casters & Stabilizers
Measures approximately 96"x48"x36".




22
Speeco Vertical/Horizontal 34 Ton Log Splitter
Model LS401224N with Briggs & Stratton 10.5HP engine. Always stored under cover and has only used non-ethanol gas.

23
Troy-Bilt Pro Line Rear Tine Rototiller
Model 3217233 21A-644H766, S/N 1B234G20089, Briggs & Stratton engine. Has only used non-ethanol gas.

24
Mantis Tiller/Cultivator
Has only used non-ethanol gas.

25
John Deere 345 Riding Mower w/48" Deck
1,140 hours, 20HP liquid cooled, hood is damaged.

26
Cosmo 400 P-Model Fertilizer Spreader
PTO drive, S/N 0314251/2014





31
Fuel Tank w/Manual Pump & Filter
Approximately 60 gallon capacity, measures approximately 14"Wx48"Lx27"H. Previously contained diesel.

32
3-Section Roller
Measures approximately 12' wide, each drum 48".


34
Ferguson 2-Bottom Plow
Type 14-AO-28, No. 75524.





39
Dragon Products 3-Point Box Scraper
Measures approximately 4-1/2' wide.


41
Pull-Type Roller
Measures approximately 67" wide.



43
Driveway Drag w/Concrete Weight
Measures approximately 5'x7'.


45
Agri-Fab Lawn Sweeper
Model 45-0522, S/N 17026, measures approximately 52" wide.

46
(2) Sets Scaffolding & Tapered Platform
Includes one full structure and extra parts with walkboard plank.

47
Oxygen/Acetylene Torch Set w/Cart
With Airco Gauges and Gasweld torch.



50
Sears/Craftsman 12" Wood Lathe on Cart
1/2HP 115/230V reversible motor.








57





62
Crain Toe-Kick Saw
Model 785, 2-1/3HP




66
(2) Skil Saw 7-1/4" Circular Saws
Skil Saw 7-1/4" Worm Drive Circular Saw HD77 - needs new cord.



69
(2) Heavy Duty 1/2" Drill Motors
Skil Drill Model 64 and Black & Decker 1/2" Utility Power Drill

70
(2) Drill Motors
Craftsman and Black & Decker




































106
Drill Doctor w/Case
Drill bit sharpener.




110
(2) Pneumatic Sanders & Air Chucks
Ingersoll-Rand and Suntech









119
Box of Miscellaneous
Sockets, bits, 1/2" speed handle, etc.

120
Box of Miscellaneous
Hole saws, bit sets, nut drivers, compression tester, etc.

121
Box of Miscellaneous
Grommets, tools, snap setter, wallpaper tools, etc.

122
Box of Miscellaneous
Magnifying glasses, hole punch, flashlight, misc office supplies.






128
Vintage Measuring Tools & Level
Stanley, Johnson, etc.

129
Castered Shop Cart
Measures approximately 24"x36"x32".

130
Castered Shop Cart
Measures approximately 20"x30"x32".

131
Castered Shop Cart
Measures approximately 28"x42"x33".





136
(3) Fans
(2) box fans, (1) oscillating.







143
Miscellaneous Automotive
Jacks, tire chains, tire iron, etc.


145
Fencing Supplies
(2) buckets double-barb staples, fence stretcher, winch, hardware.

146
Dayton Industrial Motor w/Switch & Teel Pump
Dayton model 5K9616, 115/230V, 2HP.





151
Tubing Benders, Pipe Threader, and
Grinding wheel dresser and pipe cutters.



Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Newberg Estate Auction
 Online Only Auction
Auction Date(s)
Bidding Starts: Monday Apr 10
Bidding Ends: Tuesday Apr 18
Auction Location

Newberg, OR 97132
Company
Listing Terms and Conditions
Auction Terms & Conditions - REGISTRATION & BID NUMBER ACCEPTANCE: By registering and accepting a bid number online, the bidder acknowledges they have read, understand, and agrees to be bound by the terms and conditions of Auction posted online in this document or available at auction site. When you sign up for a bidder number your credit card number will be retained and charged for your purchase(s), unless previous arrangements with management are made prior to auction day. By clicking the accept button online, you enter into a binding legal agreement with Auction Sales Co., LLC. Auction Sales Co., LLC is providing Internet online bidding as a service to Bidder. Bidder acknowledges and understands that internet service may or may not function correctly the day of the auction. Under no circumstances shall Bidder have any kind of claim against Auction Sales Co., LLC or anyone else if their Internet service fails to work correctly before or during the auction. Internet bidders who desire to make certain their bid is acknowledged should use the Pre bidding feature and leave their maximum bid prior to the auction closing. Registered bidders are responsible and liable for all bids they place - intentional or accidental. Lots will have a "STAGGERED" and "SOFT CLOSE". You will be notified by email that you are the winning bidder. Email invoices will be sent as soon as the Auction closes. What is a "STAGGERED CLOSE"? The lots do not close all at the same time. Lots will have a staggered closing using a mixed sequence. Follow the clock to the right of each lot to know the exact closing time of a particular lot. What is a "SOFT CLOSE"?? If a bid is submitted and confirmed during the last 2 minutes before closing, then the time will be extended on that lot by 1 minute. This will continue until no more bids are placed on the lot. GENERAL TERMS OF AUCTION: It is the bidder's responsibility to preview and inspect the items prior to bidding/buying and determine the condition of the item they are bidding on. All articles of merchandise are offered "As Is, Where Is" by lot, individually or in groups as announced by the auctioneer at time of auction. No claim will be considered for allowance adjustment or rescission of any sale based upon the failure of the property to correspond to any particular standards or expectations of the buyer. It is important that the buyer avail themselves of the inspection periods. All items sold "AS IS" meaning the bidder is responsible for due diligence in inspecting all items. Auction Sales Co., LLC will pass on any information, good or bad, that the seller gives to us in describing the items. Auction Sales Co., LLC is not responsible for incorrect listing information, if any. However, it is up to buyer to determine the condition of the item they are bidding on. All sales are final. When a bidder is awarded the winning bid on an item, that bidder instantly becomes the new owner of that item and is completely responsible for that item. AUCTION SALES CO., LLC RESERVES THE RIGHT TO WITHDRAW, CHANGE OR RE-CATALOG ITEMS IN THIS AUCTION. ALL MEASUREMENTS ARE APPROXIMATE. BIDDING - Do not bid unless you agree to ALL of the terms and conditions posted herein. By bidding you are acknowledging agreement with all of the terms and conditions included herein and else where on our website. The highest Bidder shall be the Buyer and no Bidder shall retract their bid. A Buyer is deemed to have accepted an item or lot when they make their bid. A successful bid at auction constitutes a legally binding contract of sale. All sales are final. The acceptable bidding increments are established and controlled by the Auctioneer. Any dispute arising as to any bidding shall be settled by Auctioneer at his sole discretion, and Auctioneer may put the lot in dispute up for sale again. Auctioneer reserves the right to refuse any bid, which it considers to be an insignificant advance over the preceding bid. Certain items in the sale are being offered subject to reserve, which is the confidential minimum price below which such lot will not be sold. The Auctioneer has the right to place a bid for the consignor up to the Lot's reserve. Lots that fail to meet the reserve price may be represented for sale in another auction. Auction Sales Co, LLC reserves the right to allow any and all employees to bid. Seller and/or Auctioneer reserve the right to reject a Bidders registration application and/or bids for any reason in their sole discretion without prior contact to the Bidder. Bidders who bid from off site and are not present at the live auction or preview understand and acknowledge that they may not be able to inspect an item as well as if they examined it in person. PAYMENT: Your credit card number will be retained for this sale only, and charged for your purchase(s) at the close of the auction, unless prior payment arrangements have been made with Auction Sales Co., LLC staff prior to the close of the auction (auctionsalesco@gmail.com) An additional 3% processing fee will be charged for any credit card used. We accept: Visa, Mastercard, American Express and Discover. Purchases cannot be removed from the auction site until paid for in full. If paid for with non-certified funds, items will not be released until funds clear our bank. Payment in full is due prior to pickup. Auction Sales Co., LLC accepts cash, credit cards, wire transfers and cashiers checks. BUYERS PREMIUM: Premium will be added to EACH LOT purchased at the following rate: Items selling up to $5,000.00 - 10% Items selling from $5,001.00 and above - 5% REMOVAL OF ITEMS/SHIPPING & HOLD HARMLESS: The buyer is solely responsible for removal and shipping of their own purchases. Items may be picked up by appointment only. All items must be picked up by the dates listed in this auction's details. ANY ITEM(S) NOT PICKED UP OR PAID FOR BY THE DATES LISTED IN THIS AUCTION'S DETAILS, WITHOUT PRIOR ARRANGEMENTS BEING MADE WITH MANAGEMENT OF AUCTION SALES CO, LLC, WILL BE DEEMED ABANDONED AND WILL BECOME THE PROPERTY OF AUCTION SALES CO. Successful bidders will be required to schedule an appointment for their load out. Successful bidders will be sent an email with their invoice which will include a link to sign up for a load out date and time. PURCHASER SHALL MAKE HIS OWN ARRANGEMENTS FOR INSURANCE COVERAGE FOR ALL ITEMS PURCHASED. The purchaser hereby agrees to indemnify and hold harmless Auction Sales Co., LLC and the seller, against any and all liability, loss, costs, damages and other expenses arising from attending the auction or the loading out of equipment by Auction Sales Co., LLC on the purchaser's behalf. All lots must be removed within the stated load out schedule. Any item not picked up or paid for by during these dates will be deemed abandoned and will become the property of Auction Sales Co., LLC. Items will be removed at purchaser's sole cost and risk, and only in a manner approved by auctioneer. Prior to the commencement of loading, dismantling, rigging or cutting or any operation affecting buildings or land, purchaser shall furnish certificates, satisfactory to auctioneer, holding auctioneer harmless for any claims concerning damage or injury to persons or property arising out of any such acts. All equipment used in connection with removal, shall itself be removed with the purchased lots. All buyers, customers, hauling companies, and their agents release Auction Sales Co., LLC, it's employees, agents, and sellers from all liability during the loading and hauling process. Auction Sales Co., LLC will not be held liable for any damages. It is the sole responsibility of the buyer to tie-down loads appropriately and to DOT regulations. All rights, privileges and powers reserved or granted to Auction Sales Col, LLC in these Terms of Sale shall be deemed reserved and granted to Auction Sales Co., LLC's employees, advertising representatives, and all owners for whom the lots are being sold. Auction Sales Co., LLC does not accept responsibility for the failure of any equipment sold to meet the safety standards on classifications of equipment by the Department of Labor Safety and Health Regulation, Federal OSHA or the Environmental Protection Agencies. It is the express responsibility of the buyer to determine what safety equipment must be in service on any machinery purchased and to comply with these regulatory requirements prior to using any equipment, machinery or vehicles purchased from Auction. In the event Auction Sales Co., LLC is required to employ an attorney to enforce any term of the agreement, purchaser agrees to pay reasonable attorney's fees, in addition to all court costs. Every person at the auction site before, during and after the auction acknowledges that he/she is there at his/her own risk with notice of the condition of the premises. No person shall have any claim against the Auctioneers, their agents, employees, sellers, owners, or principals for any injuries sustained or for any damages to or loss of property which may occur from any causes whatsoever.
Flatbed trailer, tractor implements, yard & garden equipment, log splitter, woodworking tools, hand tools, shelving, fishing & outdoor equipment, wine barrels, vintage collectibles and more!

1
PLEASE READ & UNDERSTAND ALL TERMS & CONDITIONS
Terms & Conditions can be found in the auction details section. Please read and understand your responsibilities as a buyer. MEASUREMENTS ARE APPROXIMATE BUYER'S PREMIUM: Premium will be added to EACH LOT purchased at the following rate: Items sellin...

2
PREVIEW DATES & TIMES
Monday, April 17th 3-7pm PDT Tuesday, April 18th 10am-2pm PDT No EARLY arrivals please. 16325 NE Kings Grade Newberg, OR 97132

3
LOAD OUT INFORMATION - OFF SITE AUCTION
ALL ITEMS LOCATED IN NEWBERG, OREGON. Load out Wednesday & Thursday April 19th & 20th 9am-4pm - by Appointment Only If these load out dates do not work for you - DO NOT BID No Shipping Offered If you purchase large items - BRING LOADOUT HELP WITH YO...

4
PAYMENT INFORMATION
PAYMENT: Credit cards used to register for this auction will be charged at the close of the auction unless alternate payment requests have been made with our office prior to the close of the auction. Alternate payment requests can be emailed to aucti...

5
2001 Big Tex 18' Utility Trailer
Tandem axle with ramps, electric jack, in-floor tool box, 8-lug aluminum wheels, spare tire. Measures approximately 18'x7'. VIN 16VCX182911333303

6
Jet Heavy Duty Wood Shaper
Model JWX-25CS, 3HP 230V, S/N 0010168.

7
Shop Fox 8" Jointer
Model W1741, 3HP 220V, S/N WJ08-1585.

8
Jet Drum Sander
Model 22-44 PLUS, 1-3/4HP 115V, S/N 131211580.

9
Delta Rockwell 10" Unisaw Table Saw
Model 34-450, 220V, S/N E15112. With workbench and drawers.

10
Milwaukee Heavy Duty 8" Panel Saw
Model 6480-20, 3-3/4HP 120V, S/N 697VB907210046.

11
Craftsman 10" Radial Arm Saw
Contractor Series, Model 113.196380, 3HP 120/240V, 16" slide, S/N 98042P0019.

12

13

14
Large Wood Workbench w/Casters & Stabilizers
Measures approximately 96"x48"x36".

15

16

17

22
Speeco Vertical/Horizontal 34 Ton Log Splitter
Model LS401224N with Briggs & Stratton 10.5HP engine. Always stored under cover and has only used non-ethanol gas.

23
Troy-Bilt Pro Line Rear Tine Rototiller
Model 3217233 21A-644H766, S/N 1B234G20089, Briggs & Stratton engine. Has only used non-ethanol gas.

24
Mantis Tiller/Cultivator
Has only used non-ethanol gas.

25
John Deere 345 Riding Mower w/48" Deck
1,140 hours, 20HP liquid cooled, hood is damaged.

26
Cosmo 400 P-Model Fertilizer Spreader
PTO drive, S/N 0314251/2014

27

28

29

30

31
Fuel Tank w/Manual Pump & Filter
Approximately 60 gallon capacity, measures approximately 14"Wx48"Lx27"H. Previously contained diesel.

32
3-Section Roller
Measures approximately 12' wide, each drum 48".

33

34
Ferguson 2-Bottom Plow
Type 14-AO-28, No. 75524.

35

36

37

38

39
Dragon Products 3-Point Box Scraper
Measures approximately 4-1/2' wide.

40

41
Pull-Type Roller
Measures approximately 67" wide.

42

43

43
Driveway Drag w/Concrete Weight
Measures approximately 5'x7'.

44

45
Agri-Fab Lawn Sweeper
Model 45-0522, S/N 17026, measures approximately 52" wide.

46
(2) Sets Scaffolding & Tapered Platform
Includes one full structure and extra parts with walkboard plank.

47
Oxygen/Acetylene Torch Set w/Cart
With Airco Gauges and Gasweld torch.

48

49

50
Sears/Craftsman 12" Wood Lathe on Cart
1/2HP 115/230V reversible motor.

51

52

53

53

54

55

56

57

58

59

60

61

62
Crain Toe-Kick Saw
Model 785, 2-1/3HP

63

64

65

66
(2) Skil Saw 7-1/4" Circular Saws
Skil Saw 7-1/4" Worm Drive Circular Saw HD77 - needs new cord.

67

68

69
(2) Heavy Duty 1/2" Drill Motors
Skil Drill Model 64 and Black & Decker 1/2" Utility Power Drill

70
(2) Drill Motors
Craftsman and Black & Decker

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99

100

101

102

103

104

105

106
Drill Doctor w/Case
Drill bit sharpener.

107

108

109

110
(2) Pneumatic Sanders & Air Chucks
Ingersoll-Rand and Suntech

111

112

113

114

115

116

117

118

119
Box of Miscellaneous
Sockets, bits, 1/2" speed handle, etc.

120
Box of Miscellaneous
Hole saws, bit sets, nut drivers, compression tester, etc.

121
Box of Miscellaneous
Grommets, tools, snap setter, wallpaper tools, etc.

122
Box of Miscellaneous
Magnifying glasses, hole punch, flashlight, misc office supplies.

123

124

125

126

127

128
Vintage Measuring Tools & Level
Stanley, Johnson, etc.

129
Castered Shop Cart
Measures approximately 24"x36"x32".

130
Castered Shop Cart
Measures approximately 20"x30"x32".

131
Castered Shop Cart
Measures approximately 28"x42"x33".

132

133

134

135

136
(3) Fans
(2) box fans, (1) oscillating.

137

138

139

140

141

142

143
Miscellaneous Automotive
Jacks, tire chains, tire iron, etc.

144

145
Fencing Supplies
(2) buckets double-barb staples, fence stretcher, winch, hardware.

146
Dayton Industrial Motor w/Switch & Teel Pump
Dayton model 5K9616, 115/230V, 2HP.

147

148

149

150

151
Tubing Benders, Pipe Threader, and
Grinding wheel dresser and pipe cutters.

152

153