Ward - Machine Shop Online Auction
Listing ID#: 1448233

Auction Location

Mayville, NY 14757
Auction Dates and TimesSALE IS COMPLETED
Bidding Starts: Sunday Oct 9
Bidding Ends: Tuesday Oct 11
Auction Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
Peterson Auction & Realty LLC.

Website: petersonauction.com

GoToAuction.com ID#: 4337
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
All bidders and other persons participating in this sale agree that they have read and have full knowledge of these terms and agree to be bound thereby. 10% Buyer's Premium All lots sell absolute to the highest bidder. This is a staggered CLOSING. This means the auction will begin to close at 6:00pm with 20 seconds between each lot. The closing time of a lot will be extended automatically an additional 2 minutes if there is active bidding within 2 minutes of that lot closing. All items are sold "AS IS, WHERE IS" with no warrantee on condition or authenticity. It is the responsibility of the bidder/buyer to have thoroughly inspected any and all items prior to bidding, to have satisfied themselves as to the condition and value in order to bid based upon that judgment solely. Seller and/or auctioneer assumes no responsibility for any repairs regardless of any oral statements about the item from any agents or employees of either entity. 1. IDENTIFICATION: All participants and purchasers are required to give full name and address. 2. PAYMENT: Cash, Certified Funds, Credit/Debit Card w/ 3.5% Additional Buyer's Premium Checks from ESTABLISHED customers of Peterson Auction 3. TIME OF PAYMENT: Each purchaser will be required to make full payment in USD on each lot purchased by the end of the designated removal date and time. The full purchase price of all lots to the same buyer must be paid within the time fixed and before removal of any goods. In default of such payment, a 10% of final bid price received (minimum $300) non-payment fee will be charged to card on file. The auctioneer and seller reserve the right to immediately relist and/or sell items. Any and all defaulted bidders are excluded from bidding in future Peterson Auction & Realty LLC. auctions. 4. REMOVAL: All items must be removed no later than Wednesday, October 12th @ 6PM. Removal shall be at the expense, risk and liability of the purchaser. Peterson Auction & Realty LLC. and Seller are not responsible for providing tools, manpower or equipment to aid in removal of purchased items. Purchases will be delivered only on presentation of paid bill. 5. CONDITION OF ARTICLES SOLD: The Auctioneer shall not be responsible for the correct description, genuineness, authenticity of, or defect in any lot, and makes no warranty in connection therewith. No sale shall be set aside, nor allowance made on account of any incorrectness, error in cataloging, or any imperfection not noted. NO DEDUCTION ALLOWED ON DAMAGED ARTICLES. ALL ARTICLES ARE BEING SOLD "AS IS" AND WITHOUT RECOURSE. ARTICLES ARE NOT WARRANTED AS MERCHANTABLE OR FIT FOR ANY PARTICULAR PURPOSE. NO CLAIM MAY BE MADE BY PURCHASER RELATING TO THE CONDITION OR USE OF ARTICLES PURCHASED OR FOR PROXIMATE AND CONSEQUENTIAL DAMAGES ARISING THEREFROM. 6. SAFETY DEVICES: Articles purchased may not incorporate approved activating mechanisms, operating safety devices or safety guards, as required by OSHA or otherwise. It is purchaser's responsibility that articles purchased be so equipped and safeguarded to meet OSHA and any other requirements before placing such articles into operation. 7. INDEMNIFICATION: Purchaser agrees to indemnify and hold the Auctioneer and Seller harmless from and against all claims and liabilities relating to the condition or use of the articles purchased or failure of user to follow instructions, warnings or recommendations of the manufacturer, or to comply with federal, state and local laws applicable to such articles, including OSHA requirements, or for proximate or consequential damages, costs or legal expenses arising therefrom. 8. CLAIMS: No claims will be allowed after removal of goods from premises. 9. RESPONSIBILITY FOR NON-DELIVERY: The Auctioneer or Seller shall not, in any event, be liable for non-delivery of any other matter or thing, to any purchaser of any lot, other than for the return to the purchaser of the sum of amount paid on said lot, should the purchaser be entitled thereto. 10. COMPLIANCE WITH TERMS OF SALE: In default of payment of bills in full within the time therein specified, the auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. Lots not paid for and removed within the time allowed herein may be resold at public or private sale without further notice. 11. RISK TO PERSON AND PROPERTY: Persons attending during exhibition, sale or removal of goods assume all risks of damage of or loss to person and property and specifically release the auctioneer or seller from liability here for. Neither the Auctioneer nor his principal shall be liable by reason of any defect in or condition of the premises on which the sale is held. 12. ADDITION TO OR WITHDRAWAL FROM SALE: The auctioneer reserves the right to withdraw from sale any of the property listed or to sell at this sale property not listed and reserves the right to group one or more lots into one or more selling lots or to subdivide into two or more selling lots. Whenever the best interest of the seller will be served, the auctioneer reserves the right to sell all the property listed, in bulk. 13. SALE BY ESTIMATED WEIGHT, COUNT OR MEASURE: Where items are sold by estimated weight, count or measure, Peterson Auction & Realty LLC. or Seller are not responsible for any shortage or overage. 14. OPENING BIDS: The auctioneer reserves the right to reject all bids on lots upon which there is an opening bid, that do not meet or exceed the opening bid amount. 15. RECORDS: The record of sale kept by the auctioneer and bookkeeper will be taken as final in the event of any dispute. 16. AGENCY: The auctioneer is acting as agent only and is not responsible for the acts of its principals. 17. SALES TAX: Purchaser shall also pay all applicable sales or use taxes imposed by all taxing authorities on such transactions. Items are taxed based on location at time of sale, NOT BY LOCATION OF PURCHASER. This Auction takes place in New York State, county of Chautauqua. Therefore, there is 8% tax. 18. BANKRUPTCY: If at any time prior to payment in full, purchaser files a petition in bankruptcy or for other similar protection from creditors, or an involuntary petition in bankruptcy or other similar proceeding is filed against purchaser, then, at the option of the auctioneer, the sale may be voided. 19. ADDITIONAL TERMS AND CONDITIONS: The auctioneer may add other terms and conditions of sale, such additional terms and conditions to be announced prior to the auction. 20. SHIPMENT: Local Pick-Up Only
Listing Information
Ward Machine Shop Online Auction
 
 
 
Preview: Monday, October 10th 3PM-6PM
 
Online bidding to begin: Sunday, October 9th at 9AM
Online bidding to begin to close: Tuesday, October 11th at 6PM (staggered soft close)
 
Pick-Up: Wednesday, October 12th 12PM-6PM
 
 
Please follow the link below to our website for more information and online bidding assistance:
 
https://www.petersonauction.hibid.com
 
 

Auction to include:

1
Reid 618H Surface Grinder
Serial #: 13515 Comes with Operators Manual, Walker ElectroMagnetic Chuck, Extra Wheels. 52" x 9? Table, 18? x 6? Magnetic Chuck. Machine stands 6' Tall. On Pallet read to be loaded. 3 Phase 240V

2
Ab Arboga maskiner drill press
Type GM3508 No 189960 3 phase electric Table is 24 in long 20in wide Chuck is included Machine is 89in tall 29in wide 33in deep

3
Clausing drill press
6in vise and chuck included Table is 18in long 15in wide Machine is 84in tall 19in wide 37in deep 3 phase electric

4
Black diamond drill grinder
Model 3a 1/4-3/4 range Everything in cabinet included collets grinding wheels 110 electric Metal cabinet is 21in long 15in wide 36in tall

5
Brown & Sharpe Center Grinder
32" Work Table. With Dogs and Chuck. 2 Grinding Wheels. Has 2 Wheel mounting points. Up off ground ready to be loaded. 3 Phase 240v whole Machine is 64? tall, 64? wide and 40? deep

6
GROB NS24 Bandsaw
Built in RW-A Welder. 10 Speed. 174" Blade Length. 3 Phase 240V. 24" x 28-1/2? Table. 24? Throat, 8-1/2? height. Whole Machine is 51? x 36? x 91? tall. Extra Blade.

7
Rockwell drilling and tapping machine
Serial#- 27947-01 3 phase Model#- EFI-3T The head won't go up and down Base- 3ft x 3ft 3ft Gear driven

8
Sunnen precision honing machine
Model#- MBB-1290D Serial#- 15477 Extra honing stones

9
Dresser air compressor
Model 5000 Serial# 4005X4809 5hp 3 phase electric motor

10
Big joe 7ft lift
New battery

11
Yankee twist drill grinder
General Electric motor - 1/2hp

12
Tool sharpening grinder
Comes with extra carbide dressing wheel


14

15
Oliver Adrian File Machine
Single Phase 115V. Put a file in it and it runs it up and down.


17
Niagara Roller on Stand
38" wide Rollers. 4' Wide. 4' Tall. 26-1/2" across base. 16 Gauge Capacity.

18
Balancer
New Bearings. Adjustable. 33" max width. 36" x 27" x 38" Tall

19
Harig grind-all fixture
No.1 uni-dex and duo-form


21
Rigid power tools and chargers
3 battery chargers drill and grinder

22
Pallet Forks
One is 42", one is 39"


24
Corded power tools
Jig saws, sander , drill



27

28
Dial and Vernier Calipers
6" Craftsman Dial and Matui Vernier


30
Cincinnati dividing head
Comes with 2 extra plates

31



34
Jones Motorola Co. Hand Tachometer
3 Range. Measures 300 RPM to 15,000 RPM. Model: 3HTC



37


39

40
Inside Micrometer Gauges
Swedish Gauge Co. only has heads to measure .235 to .275 inch. Lufkin measures 1-1/2" to 12". Cindi-Cal universal Bore and Groove Gauge


42
5 hardware cabinets
4- 1ft x 1ft x 1ft

43


45
Lathe tooling w/cabinet
4 drawer metal cabinet 13in long 9in wide 12in high




49
Depth Gauge and Angle Gauge
Lufkin Micrometer Depth Gauge,



52
Vernier Calipers
Brown & Sharpe 25". Chinese 18" Stand Up Vernier Caliper

53
Drill chucks and collets
5c collets Jacobs chucks no.14 6a and no.500



56
Tap and die
Handles and dies




60
Thompson Mill-Drill table
Model-100 Serial# 2839



63
Pair of Rotary Tables
Mounted on 8-1/2" x 10? plate, 8" table. 7" table on 7-3/4" x 8" plate

64
Pair Of Machine Vises
4" Vise, 2-1/2" Angle Vice


66
425+ Cutter Bits
We think part numbers are: 73.31-493, TNRA-3-0 JR. See pictures otherwise.



69
Magnetic V Blocks
For use on a magnetic Table

70
2-Reduction drive and winch
Baldor .5 hp motors


72
C and Machine Clamps
A couple are rusted up.


74





79
Pair Of 3 Jaw Chucks
One is froze up parts. Other is Union MFG. Class S 9" No. 153. With handle

80
Aluminum shim stock
3 1/2in wide 1/16th thick


82
Angle plate fixture plate
12in long 9in wide


84
Challenge machinery lapping table
24in long 18in wide 4in thick


86
Drill Chuck, 3 Jaw Chucks, Cutter Chuck
Morse Tapers. Jacobs No.4 Drill Chuck, Union 4" No.25 3 jaw Chuck, 6" chuck




90
18ft swing beam hoist
I beam is 8in x 4in wide Half ton rolling hoist

91
Contrx swing crane
12ft x 4in x 9in

92
Truck steel carrier
55inX55in 28in high

93
Bushman crane arm
18ft x 6in x 15in

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend







Sponsored Links

Ward - Machine Shop Online Auction

Peterson Auction & Realty LLC.

Peterson Auction & Realty LLC.


Contact:
Phone:
Sale Location
6427 Centralia-Hartfield Rd.
Mayville, NY 14757
Sale Dates and Times
Sale Terms and Conditions
All bidders and other persons participating in this sale agree that they have read and have full knowledge of these terms and agree to be bound thereby. 10% Buyer's Premium All lots sell absolute to the highest bidder. This is a staggered CLOSING. This means the auction will begin to close at 6:00pm with 20 seconds between each lot. The closing time of a lot will be extended automatically an additional 2 minutes if there is active bidding within 2 minutes of that lot closing. All items are sold "AS IS, WHERE IS" with no warrantee on condition or authenticity. It is the responsibility of the bidder/buyer to have thoroughly inspected any and all items prior to bidding, to have satisfied themselves as to the condition and value in order to bid based upon that judgment solely. Seller and/or auctioneer assumes no responsibility for any repairs regardless of any oral statements about the item from any agents or employees of either entity. 1. IDENTIFICATION: All participants and purchasers are required to give full name and address. 2. PAYMENT: Cash, Certified Funds, Credit/Debit Card w/ 3.5% Additional Buyer's Premium Checks from ESTABLISHED customers of Peterson Auction 3. TIME OF PAYMENT: Each purchaser will be required to make full payment in USD on each lot purchased by the end of the designated removal date and time. The full purchase price of all lots to the same buyer must be paid within the time fixed and before removal of any goods. In default of such payment, a 10% of final bid price received (minimum $300) non-payment fee will be charged to card on file. The auctioneer and seller reserve the right to immediately relist and/or sell items. Any and all defaulted bidders are excluded from bidding in future Peterson Auction & Realty LLC. auctions. 4. REMOVAL: All items must be removed no later than Wednesday, October 12th @ 6PM. Removal shall be at the expense, risk and liability of the purchaser. Peterson Auction & Realty LLC. and Seller are not responsible for providing tools, manpower or equipment to aid in removal of purchased items. Purchases will be delivered only on presentation of paid bill. 5. CONDITION OF ARTICLES SOLD: The Auctioneer shall not be responsible for the correct description, genuineness, authenticity of, or defect in any lot, and makes no warranty in connection therewith. No sale shall be set aside, nor allowance made on account of any incorrectness, error in cataloging, or any imperfection not noted. NO DEDUCTION ALLOWED ON DAMAGED ARTICLES. ALL ARTICLES ARE BEING SOLD "AS IS" AND WITHOUT RECOURSE. ARTICLES ARE NOT WARRANTED AS MERCHANTABLE OR FIT FOR ANY PARTICULAR PURPOSE. NO CLAIM MAY BE MADE BY PURCHASER RELATING TO THE CONDITION OR USE OF ARTICLES PURCHASED OR FOR PROXIMATE AND CONSEQUENTIAL DAMAGES ARISING THEREFROM. 6. SAFETY DEVICES: Articles purchased may not incorporate approved activating mechanisms, operating safety devices or safety guards, as required by OSHA or otherwise. It is purchaser's responsibility that articles purchased be so equipped and safeguarded to meet OSHA and any other requirements before placing such articles into operation. 7. INDEMNIFICATION: Purchaser agrees to indemnify and hold the Auctioneer and Seller harmless from and against all claims and liabilities relating to the condition or use of the articles purchased or failure of user to follow instructions, warnings or recommendations of the manufacturer, or to comply with federal, state and local laws applicable to such articles, including OSHA requirements, or for proximate or consequential damages, costs or legal expenses arising therefrom. 8. CLAIMS: No claims will be allowed after removal of goods from premises. 9. RESPONSIBILITY FOR NON-DELIVERY: The Auctioneer or Seller shall not, in any event, be liable for non-delivery of any other matter or thing, to any purchaser of any lot, other than for the return to the purchaser of the sum of amount paid on said lot, should the purchaser be entitled thereto. 10. COMPLIANCE WITH TERMS OF SALE: In default of payment of bills in full within the time therein specified, the auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. Lots not paid for and removed within the time allowed herein may be resold at public or private sale without further notice. 11. RISK TO PERSON AND PROPERTY: Persons attending during exhibition, sale or removal of goods assume all risks of damage of or loss to person and property and specifically release the auctioneer or seller from liability here for. Neither the Auctioneer nor his principal shall be liable by reason of any defect in or condition of the premises on which the sale is held. 12. ADDITION TO OR WITHDRAWAL FROM SALE: The auctioneer reserves the right to withdraw from sale any of the property listed or to sell at this sale property not listed and reserves the right to group one or more lots into one or more selling lots or to subdivide into two or more selling lots. Whenever the best interest of the seller will be served, the auctioneer reserves the right to sell all the property listed, in bulk. 13. SALE BY ESTIMATED WEIGHT, COUNT OR MEASURE: Where items are sold by estimated weight, count or measure, Peterson Auction & Realty LLC. or Seller are not responsible for any shortage or overage. 14. OPENING BIDS: The auctioneer reserves the right to reject all bids on lots upon which there is an opening bid, that do not meet or exceed the opening bid amount. 15. RECORDS: The record of sale kept by the auctioneer and bookkeeper will be taken as final in the event of any dispute. 16. AGENCY: The auctioneer is acting as agent only and is not responsible for the acts of its principals. 17. SALES TAX: Purchaser shall also pay all applicable sales or use taxes imposed by all taxing authorities on such transactions. Items are taxed based on location at time of sale, NOT BY LOCATION OF PURCHASER. This Auction takes place in New York State, county of Chautauqua. Therefore, there is 8% tax. 18. BANKRUPTCY: If at any time prior to payment in full, purchaser files a petition in bankruptcy or for other similar protection from creditors, or an involuntary petition in bankruptcy or other similar proceeding is filed against purchaser, then, at the option of the auctioneer, the sale may be voided. 19. ADDITIONAL TERMS AND CONDITIONS: The auctioneer may add other terms and conditions of sale, such additional terms and conditions to be announced prior to the auction. 20. SHIPMENT: Local Pick-Up Only
Listing Details
Ward Machine Shop Online Auction
 
 
 
Preview: Monday, October 10th 3PM-6PM
 
Online bidding to begin: Sunday, October 9th at 9AM
Online bidding to begin to close: Tuesday, October 11th at 6PM (staggered soft close)
 
Pick-Up: Wednesday, October 12th 12PM-6PM
 
 
Please follow the link below to our website for more information and online bidding assistance:
 
https://www.petersonauction.hibid.com
 
 

Auction to include:

1
Reid 618H Surface Grinder
Serial #: 13515 Comes with Operators Manual, Walker ElectroMagnetic Chuck, Extra Wheels. 52" x 9? Table, 18? x 6? Magnetic Chuck. Machine stands 6' Tall. On Pallet read to be loaded. 3 Phase 240V

2
Ab Arboga maskiner drill press
Type GM3508 No 189960 3 phase electric Table is 24 in long 20in wide Chuck is included Machine is 89in tall 29in wide 33in deep

3
Clausing drill press
6in vise and chuck included Table is 18in long 15in wide Machine is 84in tall 19in wide 37in deep 3 phase electric

4
Black diamond drill grinder
Model 3a 1/4-3/4 range Everything in cabinet included collets grinding wheels 110 electric Metal cabinet is 21in long 15in wide 36in tall

5
Brown & Sharpe Center Grinder
32" Work Table. With Dogs and Chuck. 2 Grinding Wheels. Has 2 Wheel mounting points. Up off ground ready to be loaded. 3 Phase 240v whole Machine is 64? tall, 64? wide and 40? deep

6
GROB NS24 Bandsaw
Built in RW-A Welder. 10 Speed. 174" Blade Length. 3 Phase 240V. 24" x 28-1/2? Table. 24? Throat, 8-1/2? height. Whole Machine is 51? x 36? x 91? tall. Extra Blade.

7
Rockwell drilling and tapping machine
Serial#- 27947-01 3 phase Model#- EFI-3T The head won't go up and down Base- 3ft x 3ft 3ft Gear driven

8
Sunnen precision honing machine
Model#- MBB-1290D Serial#- 15477 Extra honing stones

9
Dresser air compressor
Model 5000 Serial# 4005X4809 5hp 3 phase electric motor

10
Big joe 7ft lift
New battery

11
Yankee twist drill grinder
General Electric motor - 1/2hp

12
Tool sharpening grinder
Comes with extra carbide dressing wheel


14

15
Oliver Adrian File Machine
Single Phase 115V. Put a file in it and it runs it up and down.


17
Niagara Roller on Stand
38" wide Rollers. 4' Wide. 4' Tall. 26-1/2" across base. 16 Gauge Capacity.

18
Balancer
New Bearings. Adjustable. 33" max width. 36" x 27" x 38" Tall

19
Harig grind-all fixture
No.1 uni-dex and duo-form


21
Rigid power tools and chargers
3 battery chargers drill and grinder

22
Pallet Forks
One is 42", one is 39"


24
Corded power tools
Jig saws, sander , drill



27

28
Dial and Vernier Calipers
6" Craftsman Dial and Matui Vernier


30
Cincinnati dividing head
Comes with 2 extra plates

31



34
Jones Motorola Co. Hand Tachometer
3 Range. Measures 300 RPM to 15,000 RPM. Model: 3HTC



37


39

40
Inside Micrometer Gauges
Swedish Gauge Co. only has heads to measure .235 to .275 inch. Lufkin measures 1-1/2" to 12". Cindi-Cal universal Bore and Groove Gauge


42
5 hardware cabinets
4- 1ft x 1ft x 1ft

43


45
Lathe tooling w/cabinet
4 drawer metal cabinet 13in long 9in wide 12in high




49
Depth Gauge and Angle Gauge
Lufkin Micrometer Depth Gauge,



52
Vernier Calipers
Brown & Sharpe 25". Chinese 18" Stand Up Vernier Caliper

53
Drill chucks and collets
5c collets Jacobs chucks no.14 6a and no.500



56
Tap and die
Handles and dies




60
Thompson Mill-Drill table
Model-100 Serial# 2839



63
Pair of Rotary Tables
Mounted on 8-1/2" x 10? plate, 8" table. 7" table on 7-3/4" x 8" plate

64
Pair Of Machine Vises
4" Vise, 2-1/2" Angle Vice


66
425+ Cutter Bits
We think part numbers are: 73.31-493, TNRA-3-0 JR. See pictures otherwise.



69
Magnetic V Blocks
For use on a magnetic Table

70
2-Reduction drive and winch
Baldor .5 hp motors


72
C and Machine Clamps
A couple are rusted up.


74





79
Pair Of 3 Jaw Chucks
One is froze up parts. Other is Union MFG. Class S 9" No. 153. With handle

80
Aluminum shim stock
3 1/2in wide 1/16th thick


82
Angle plate fixture plate
12in long 9in wide


84
Challenge machinery lapping table
24in long 18in wide 4in thick


86
Drill Chuck, 3 Jaw Chucks, Cutter Chuck
Morse Tapers. Jacobs No.4 Drill Chuck, Union 4" No.25 3 jaw Chuck, 6" chuck




90
18ft swing beam hoist
I beam is 8in x 4in wide Half ton rolling hoist

91
Contrx swing crane
12ft x 4in x 9in

92
Truck steel carrier
55inX55in 28in high

93
Bushman crane arm
18ft x 6in x 15in

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Ward - Machine Shop Online Auction
 Online Only Auction
Auction Date(s)
Bidding Starts: Sunday Oct 9
Bidding Ends: Tuesday Oct 11
Auction Location

Mayville, NY 14757
Company
Peterson Auction & Realty LLC.

Website: petersonauction.com

Listing Terms and Conditions
All bidders and other persons participating in this sale agree that they have read and have full knowledge of these terms and agree to be bound thereby. 10% Buyer's Premium All lots sell absolute to the highest bidder. This is a staggered CLOSING. This means the auction will begin to close at 6:00pm with 20 seconds between each lot. The closing time of a lot will be extended automatically an additional 2 minutes if there is active bidding within 2 minutes of that lot closing. All items are sold "AS IS, WHERE IS" with no warrantee on condition or authenticity. It is the responsibility of the bidder/buyer to have thoroughly inspected any and all items prior to bidding, to have satisfied themselves as to the condition and value in order to bid based upon that judgment solely. Seller and/or auctioneer assumes no responsibility for any repairs regardless of any oral statements about the item from any agents or employees of either entity. 1. IDENTIFICATION: All participants and purchasers are required to give full name and address. 2. PAYMENT: Cash, Certified Funds, Credit/Debit Card w/ 3.5% Additional Buyer's Premium Checks from ESTABLISHED customers of Peterson Auction 3. TIME OF PAYMENT: Each purchaser will be required to make full payment in USD on each lot purchased by the end of the designated removal date and time. The full purchase price of all lots to the same buyer must be paid within the time fixed and before removal of any goods. In default of such payment, a 10% of final bid price received (minimum $300) non-payment fee will be charged to card on file. The auctioneer and seller reserve the right to immediately relist and/or sell items. Any and all defaulted bidders are excluded from bidding in future Peterson Auction & Realty LLC. auctions. 4. REMOVAL: All items must be removed no later than Wednesday, October 12th @ 6PM. Removal shall be at the expense, risk and liability of the purchaser. Peterson Auction & Realty LLC. and Seller are not responsible for providing tools, manpower or equipment to aid in removal of purchased items. Purchases will be delivered only on presentation of paid bill. 5. CONDITION OF ARTICLES SOLD: The Auctioneer shall not be responsible for the correct description, genuineness, authenticity of, or defect in any lot, and makes no warranty in connection therewith. No sale shall be set aside, nor allowance made on account of any incorrectness, error in cataloging, or any imperfection not noted. NO DEDUCTION ALLOWED ON DAMAGED ARTICLES. ALL ARTICLES ARE BEING SOLD "AS IS" AND WITHOUT RECOURSE. ARTICLES ARE NOT WARRANTED AS MERCHANTABLE OR FIT FOR ANY PARTICULAR PURPOSE. NO CLAIM MAY BE MADE BY PURCHASER RELATING TO THE CONDITION OR USE OF ARTICLES PURCHASED OR FOR PROXIMATE AND CONSEQUENTIAL DAMAGES ARISING THEREFROM. 6. SAFETY DEVICES: Articles purchased may not incorporate approved activating mechanisms, operating safety devices or safety guards, as required by OSHA or otherwise. It is purchaser's responsibility that articles purchased be so equipped and safeguarded to meet OSHA and any other requirements before placing such articles into operation. 7. INDEMNIFICATION: Purchaser agrees to indemnify and hold the Auctioneer and Seller harmless from and against all claims and liabilities relating to the condition or use of the articles purchased or failure of user to follow instructions, warnings or recommendations of the manufacturer, or to comply with federal, state and local laws applicable to such articles, including OSHA requirements, or for proximate or consequential damages, costs or legal expenses arising therefrom. 8. CLAIMS: No claims will be allowed after removal of goods from premises. 9. RESPONSIBILITY FOR NON-DELIVERY: The Auctioneer or Seller shall not, in any event, be liable for non-delivery of any other matter or thing, to any purchaser of any lot, other than for the return to the purchaser of the sum of amount paid on said lot, should the purchaser be entitled thereto. 10. COMPLIANCE WITH TERMS OF SALE: In default of payment of bills in full within the time therein specified, the auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. Lots not paid for and removed within the time allowed herein may be resold at public or private sale without further notice. 11. RISK TO PERSON AND PROPERTY: Persons attending during exhibition, sale or removal of goods assume all risks of damage of or loss to person and property and specifically release the auctioneer or seller from liability here for. Neither the Auctioneer nor his principal shall be liable by reason of any defect in or condition of the premises on which the sale is held. 12. ADDITION TO OR WITHDRAWAL FROM SALE: The auctioneer reserves the right to withdraw from sale any of the property listed or to sell at this sale property not listed and reserves the right to group one or more lots into one or more selling lots or to subdivide into two or more selling lots. Whenever the best interest of the seller will be served, the auctioneer reserves the right to sell all the property listed, in bulk. 13. SALE BY ESTIMATED WEIGHT, COUNT OR MEASURE: Where items are sold by estimated weight, count or measure, Peterson Auction & Realty LLC. or Seller are not responsible for any shortage or overage. 14. OPENING BIDS: The auctioneer reserves the right to reject all bids on lots upon which there is an opening bid, that do not meet or exceed the opening bid amount. 15. RECORDS: The record of sale kept by the auctioneer and bookkeeper will be taken as final in the event of any dispute. 16. AGENCY: The auctioneer is acting as agent only and is not responsible for the acts of its principals. 17. SALES TAX: Purchaser shall also pay all applicable sales or use taxes imposed by all taxing authorities on such transactions. Items are taxed based on location at time of sale, NOT BY LOCATION OF PURCHASER. This Auction takes place in New York State, county of Chautauqua. Therefore, there is 8% tax. 18. BANKRUPTCY: If at any time prior to payment in full, purchaser files a petition in bankruptcy or for other similar protection from creditors, or an involuntary petition in bankruptcy or other similar proceeding is filed against purchaser, then, at the option of the auctioneer, the sale may be voided. 19. ADDITIONAL TERMS AND CONDITIONS: The auctioneer may add other terms and conditions of sale, such additional terms and conditions to be announced prior to the auction. 20. SHIPMENT: Local Pick-Up Only
Ward Machine Shop Online Auction
 
 
 
Preview: Monday, October 10th 3PM-6PM
 
Online bidding to begin: Sunday, October 9th at 9AM
Online bidding to begin to close: Tuesday, October 11th at 6PM (staggered soft close)
 
Pick-Up: Wednesday, October 12th 12PM-6PM
 
 
Please follow the link below to our website for more information and online bidding assistance:
 
https://www.petersonauction.hibid.com
 
 

Auction to include:

1
Reid 618H Surface Grinder
Serial #: 13515 Comes with Operators Manual, Walker ElectroMagnetic Chuck, Extra Wheels. 52" x 9? Table, 18? x 6? Magnetic Chuck. Machine stands 6' Tall. On Pallet read to be loaded. 3 Phase 240V

2
Ab Arboga maskiner drill press
Type GM3508 No 189960 3 phase electric Table is 24 in long 20in wide Chuck is included Machine is 89in tall 29in wide 33in deep

3
Clausing drill press
6in vise and chuck included Table is 18in long 15in wide Machine is 84in tall 19in wide 37in deep 3 phase electric

4
Black diamond drill grinder
Model 3a 1/4-3/4 range Everything in cabinet included collets grinding wheels 110 electric Metal cabinet is 21in long 15in wide 36in tall

5
Brown & Sharpe Center Grinder
32" Work Table. With Dogs and Chuck. 2 Grinding Wheels. Has 2 Wheel mounting points. Up off ground ready to be loaded. 3 Phase 240v whole Machine is 64? tall, 64? wide and 40? deep

6
GROB NS24 Bandsaw
Built in RW-A Welder. 10 Speed. 174" Blade Length. 3 Phase 240V. 24" x 28-1/2? Table. 24? Throat, 8-1/2? height. Whole Machine is 51? x 36? x 91? tall. Extra Blade.

7
Rockwell drilling and tapping machine
Serial#- 27947-01 3 phase Model#- EFI-3T The head won't go up and down Base- 3ft x 3ft 3ft Gear driven

8
Sunnen precision honing machine
Model#- MBB-1290D Serial#- 15477 Extra honing stones

9
Dresser air compressor
Model 5000 Serial# 4005X4809 5hp 3 phase electric motor

10
Big joe 7ft lift
New battery

11
Yankee twist drill grinder
General Electric motor - 1/2hp

12
Tool sharpening grinder
Comes with extra carbide dressing wheel

13

14

15
Oliver Adrian File Machine
Single Phase 115V. Put a file in it and it runs it up and down.

16

17
Niagara Roller on Stand
38" wide Rollers. 4' Wide. 4' Tall. 26-1/2" across base. 16 Gauge Capacity.

18
Balancer
New Bearings. Adjustable. 33" max width. 36" x 27" x 38" Tall

19
Harig grind-all fixture
No.1 uni-dex and duo-form

20

21
Rigid power tools and chargers
3 battery chargers drill and grinder

22
Pallet Forks
One is 42", one is 39"

23

24
Corded power tools
Jig saws, sander , drill

25

26

27

28
Dial and Vernier Calipers
6" Craftsman Dial and Matui Vernier

29

30
Cincinnati dividing head
Comes with 2 extra plates

31

32

33

34
Jones Motorola Co. Hand Tachometer
3 Range. Measures 300 RPM to 15,000 RPM. Model: 3HTC

35

36

37

38

39

40
Inside Micrometer Gauges
Swedish Gauge Co. only has heads to measure .235 to .275 inch. Lufkin measures 1-1/2" to 12". Cindi-Cal universal Bore and Groove Gauge

41

42
5 hardware cabinets
4- 1ft x 1ft x 1ft

43

44

45
Lathe tooling w/cabinet
4 drawer metal cabinet 13in long 9in wide 12in high

46

47

48

49
Depth Gauge and Angle Gauge
Lufkin Micrometer Depth Gauge,

50

51

52
Vernier Calipers
Brown & Sharpe 25". Chinese 18" Stand Up Vernier Caliper

53
Drill chucks and collets
5c collets Jacobs chucks no.14 6a and no.500

54

55

56
Tap and die
Handles and dies

57

58

59

60
Thompson Mill-Drill table
Model-100 Serial# 2839

61

62

63
Pair of Rotary Tables
Mounted on 8-1/2" x 10? plate, 8" table. 7" table on 7-3/4" x 8" plate

64
Pair Of Machine Vises
4" Vise, 2-1/2" Angle Vice

65

66
425+ Cutter Bits
We think part numbers are: 73.31-493, TNRA-3-0 JR. See pictures otherwise.

67

68

69
Magnetic V Blocks
For use on a magnetic Table

70
2-Reduction drive and winch
Baldor .5 hp motors

71

72
C and Machine Clamps
A couple are rusted up.

73

74

75

76

77

78

79
Pair Of 3 Jaw Chucks
One is froze up parts. Other is Union MFG. Class S 9" No. 153. With handle

80
Aluminum shim stock
3 1/2in wide 1/16th thick

81

82
Angle plate fixture plate
12in long 9in wide

83

84
Challenge machinery lapping table
24in long 18in wide 4in thick

85

86
Drill Chuck, 3 Jaw Chucks, Cutter Chuck
Morse Tapers. Jacobs No.4 Drill Chuck, Union 4" No.25 3 jaw Chuck, 6" chuck

87

88

89

90
18ft swing beam hoist
I beam is 8in x 4in wide Half ton rolling hoist

91
Contrx swing crane
12ft x 4in x 9in

92
Truck steel carrier
55inX55in 28in high

93
Bushman crane arm
18ft x 6in x 15in

94