Brooklyn, NY
Listing ID#: 137422

Auction Location
266 Seigel St, Brooklyn NY 11206
Auction Dates and TimesSALE IS COMPLETED
Wednesday Jul 24, 2019 Completed
Friday Jul 26, 2019 Completed
Auction Type
 Live Auction with Online Bidding  VIEW ONLINE CATALOG
Company Information
Alex Lyon and Son Auctioneers, Inc.

Website: www.lyonauction.com/

GoToAuction.com ID#: 4131
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
ALEX LYON & SON SALES MANAGERS & AUCTIONEERS, INC.

PO BOX 610 RD #2 BRIDGEPORT, NY 13030

PHONE: 315-633-2944  FAX: 315-633-8010



***NOTE***

IF YOU HAVE A COMPANY NAME THAT WILL NEED TO BE REGISTERED WITH OUR ONLINE BIDDING SYSTEM FOR VEHICLE TITLE INFORMATION, PLEASE DO SO BY GOING TO THE AUCTION HOME PAGE AND FIND THE "CLICK TO REGISTER" LINK, OR LOGIN TO YOUR ACCOUNT AND MAKE SURE YOUR INFORMATION IS UPDATED

A $10,000 Wire Transfer Deposit is needed for approval.   If you are a successful bidder the wire transfer deposit will be applied to your invoice. If your purchase is less than total deposit, your deposit will be applied to your invoice and you will be refunded the remainder of the total deposit. If you are non successful, your deposit is 100% refundable.  Please contact the Lyon office to begin the refund of your deposit. 

WIRE TRANSFER INSTRUCTIONS

“IMPORTANT”

 

You must include your buyer number and sale date as a reference in your wire transfer to ensure proper credit.  Failure to do so may result in a delay in the release  of your equipment, with subsequent storage charges.  Be specific with your bank as to the importance of this reference number! 

 

***Note: ONLINE BIDDING - please reference your online bidder #.  Also reference the name you have registered under. 

YOUR BUYER # IS_____________________________ 

 

AUCTION DATE IS ____________________________

  

TO BANK:                                       KEY BANK 

                                                      115 GENESEE ST. 

                                                      AUBURN, NY 13021

 

  ACCOUNT NAME:                          ALEX LYON & SON 

                                                      RD #2 BOX 610

                                                      7697 STATE ROUTE 31 

                                                      BRIDGEPORT, NY 13030

ACCOUNT NUMBER                       7900204004

  

ROUTING/ABA NUMBER                021300077

 

SWIFT CODE(INTERNATIONAL)   KEYBUS33

 

OUR SALES TAX ID                       16-1209422

Purchases must be removed from the sale site within 7 days of the sale date.  Loading will be on Monday through Saturday from 8:00 AM to 5:00 PM, and if applicable, Sundays from 8:00 AM to 11:00 AM.  Any equipment remaining on the grounds after 7 days will be subject to storage fees or removed at the buyers expense.  Shipping arrangements and cost are the BUYERS SOLE RESPONSIBILITY.

Purchases become the responsibility of and shall be and remain at the risk of the Purchaser immediately upon acceptance of his bid.  It shall be the responsibility of the Purchaser to insure his purchases immediately.

NOTICE – Policy for international Buyers: all international buyers must provide a current, valid passport for identification purposes and a $10,000.00 deposit. The deposit must be made with US funds in form of cashier’s check or wire transfer.

SALES TAX: All sales are subject to sales tax.

SALES TAX EXEMPTIONS: Buyers with a VALID exemption certificate are not required to pay sales tax for equipment and miscellaneous, but MUST present a copy of their certificate at time of registration at EACH SALE.

EXPORTERS:  If you take possession of your purchase in the United States, you must pay sales tax. You must provide the following in order not to be charged:

Bill of Lading – All export purchases must be removed by a trucking company. The trucking company will provide a Bill of Lading with the purchases listed.

NOTE: No items will be released without this document or you may pay tax and be reimbursed once the Bill of Lading or a Dock Receipt is received.

MOTOR VEHICLES AND TRAILER EXEMPTIONS: Specific for each state. Please call office for exemption details.

No sale shall be invalidated by reason of any defect or inaccuracy in any of the lots by reason of their being incorrectly described in this listing or elsewhere and no liability shall be borne by the Auctioneers in respect of any such fault or errors.  These listings have been prepared only as a guide based on information from sources generally believed to be reliable and from the Consignor but the accuracy thereof cannot be guaranteed or warranted by the Auctioneers.  Bidder acknowledges that it is the responsibility to inspect all equipment and to make his own inquires.

There shall be no guarantees or warranties, expressed or implied statutory or otherwise of any nature whatsoever.  Each and every lot will be sold “as is” “where is”.  Specifically, but not to restrict the generality of the foregoing, the Auctioneers make no representation or warranty on any of the lots which are the subject of the auction.

Since the property sold is second-hand property, seller makes no warranty of any kind and sells the goods on an “as-is” basis, further, seller makes no warranty of any kind whatever, expressed or implied: and all implied warranties of merchantability and fitness for a particular purpose are hereby disclaimed to the seller. 

All necessary documents will be mailed within 7 days of the payment. Availability of these documents is subject to provision of the same by the Consignor.

Every person at the Auction site before, during and after the auction sale shall be deemed to be there at his own risk with notice of the condition of the premises, the activities on the premises, and the conduct of the third parties and the Bidder shall advise his agents and employees.

THIS LISTING IS ONLY A GUIDE AND MAY NOT BE ACCURATE IN ANY WAY.  EVERY ITEM WILL SELL “AS IS” “WHERE IS”.  PLEASE INSPECT THE EQUIPMENT PRIOR TO BIDDING.  ALL SALES ARE FINAL.

Tax exempt entities must have their exemption number and state form at the time of the sale or they will be charged sales tax.

Checks will be accepted up to $1000.  "Cash or Company Check" accompanied by current “Bank Letter of Guarantee”, made payable to Alex Lyon & Son. Everything Sells “AS IS, “WHERE IS.” The following charges will apply on all purchases: 

Checks will be accepted up to $1000.  "Cash or Company Check" accompanied by current “Bank Letter of Guarantee”, made payable to Alex Lyon & Son. Everything Sells “AS IS, “WHERE IS.” The following charges will apply on all purchases: (1.) For each unit $30,001.00 and above, a 5.95% administration fee will be assessed when paying with cash or good check. (The standard fee of 8.95% will be assessed when paying with credit card); and (2.) For each unit $1,001- $30,000, a 10% administration fee will be assessed when paying with cash or good check, and a 13% fee will be assessed when paying with credit card. (3.) For each unit $0- $1,000, a 12.5% administration fee will be assessed when paying with cash or good check, and a 15.5% fee will be assessed when paying with credit card.  (4.) An additional 2.5% internet buyers fee will be charged to successful online bidders with a $700 per item cap. Payment requirements subject to change for onsite bidders.  Please contact the auction house for additional information on payment instructions.

 

 (4.) An additional 2.5% internet buyers fee will be charged to successful online bidders with a $700 per item cap. Payment requirements subject to change for onsite bidders.  Please contact the auction house for additional information on payment instructions.

***NOTE** As of February 1, 2018, successful online bidders will now pay an additional 2.5% internet buyers fee with a $700 per item cap. 

All property is sold “AS IS”, WHERE IS" and ALL SALES ARE FINAL. Property is open to thorough public inspection. It is the Bidder’s responsibility to determine condition, age, genuineness, value or any other determinative factor. Alex Lyon & Son may attempt to describe the merchandise in advertising, on the Internet and at the auction but makes no representations. In no event shall Alex Lyon & Son be held responsible for having made or implied any warranty of merchantability or fitness for a particular purpose. Bidder shall be the sole judge of value.

Bidders who bid from off site and are not present at the live auction or preview understand and acknowledge that they may not be able to inspect an item as well as if they examined it in person. It is the Bidder’s responsibility to determine condition, age, genuineness, value or any other determinative factor. Alex Lyon & Son shall endeavor to describe in detail each item and any pertinent information about it.  Alex Lyon & Son will not be responsible for any errors or omissions in the description of the merchandise unless it is a material and intentional misrepresentation of the item itself. Bidder agrees that everything is sold as is and that they may not return any item they purchase.

Please be aware that in addition to the description of each lot being a guide in regards to the condition of the lot, this also applies to the terms in which that lot is sold. It is the buyer's responsibility to listen to the audio or view the chats to know the terms of the purchase. i.e. an individual lot can be sold times the money per piece, per group within the lot, choiced with other lots times the money per piece within each lot, or in any other way the auctioneer announces a lot is to be sold. This will be announced over the audio as well as sent via chat. There is no guarantee this will be noted in the description of a lot, and may not be announced until just prior to a lot being sold. Functionality of the audio or the chat box cannot be guaranteed. A winning internet buyer is still responsible for purchasing a lot or lots in the way in which it or they are sold, regardless of whether or not it is denoted in the description, or if the audio or chat window are fuctioning properly.

Please note that each bid made is legally binding until the lot has been "Sold" online. i.e. the person running the software has hit the "Sold" button and "Sold" is displayed online. This includes if the auctioneer as accepted bid(s) higher than the highest internet bid. The auctioneer reserves the right to revert to the last highest inernet bid, so long as the lot is still open and the bid is still available to "sell" to. This includes if the auctioneer has said "sold" on site. Again, an internet bid is legally binding until the lot is "sold" online, regardless if the auctioneer has attained bids higher than the current highest internet bid or has said "sold" onsite.

Alex Lyon & Son is providing Internet pre-auction and live bidding as a service to Bidder. Bidder acknowledges and understands that this service may or may not function correctly the day of the auction. Under no circumstances shall Bidder have any kind of claim against Alex Lyon & Son or anyone else if the Internet service fails to work correctly before or during the live auction. Alex Lyon & Son will not be responsible for any missed bids from any source. Internet bidders who desire to make certain their bid is acknowledged should use the proxy-bidding feature and leave their maximum bid 24 hours before the auction begins. Alex Lyon & Son reserves the right to withdraw or re-catalog items in this auction.

Purchases must be removed from the sale site within 7 days of the sale date. Loading will be on Monday through Saturday from 8:00 AM to 4:30 PM, and if applicable, Sundays from 8:00 AM to 10:30 AM. These pickup times can change at any time. Any equipment remaining on the grounds after 7 days will be subject to storage fees or removed at the buyers expense. Shipping arrangements and cost are the BUYERS SOLE RESPONSIBILITY

**Notice Regarding Like Kind Exchange

Equipment consigned to this auction may be sold as part of an equipment exchange, pursuant to Section 1031 of the Internal Revenue Code, and the rights of the consignor under the Contract to Auction may be assigned to a third-party Qualified Intermediary

This notice appears as matter of record only.**


Listing Information

101
HAND TRUCK SUPPORT EQUIPMENT

102
HAND TRUCK SUPPORT EQUIPMENT

103
HAND TRUCK SUPPORT EQUIPMENT

104
HAND TRUCK SUPPORT EQUIPMENT

105
CHAPIN BROACAST SPREADER SUPPORT EQUIPMENT

106
2600PSI PRESSURE WASHER SUPPORT EQUIPMENT

107
(2) STEEL BULLARDS SUPPORT EQUIPMENT

108
RED CROWN GAS FUEL PUMP SUPPORT EQUIPMENT

109
PURE OIL CO. FUEL PUMP SUPPORT EQUIPMENT

110
MUSTANG MRD5085 REVERSIBLE PLATE COMPACTGOR SUPPORT EQUIPMENT

111
MUSTANG LF88 PLATE COMPACTOR SUPPORT EQUIPMENT

112
MUSTANG LF88 PLATE COMPACTOR SUPPORT EQUIPMENT

113
AMMANN AVP1240 PLATE COMPACTOR SUPPORT EQUIPMENT

114
WACKER BS700 JUMPING JACK SUPPORT EQUIPMENT

115
TITAN HD INDUSTRIAL AIR COMPRESSOR SUPPORT EQUIPMENT

116
LATE ENTRY

117
STOW 2 BAGGER MORTAR & PLASTER MIXER SUPPORT EQUIPMENT

118
STONE MORTAR & PLASTER MIXER SUPPORT EQUIPMENT BILL OF SALE

119
STONE MORTAR & PLASTER MIXER SUPPORT EQUIPMENT BILL OF SALE

120
(2) STEEL BULLARS SUPPORT EQUIPMENT

121
INGERSOLL RAND AIR WINCH SUPPORT EQUIPMENT

122
SHOP CART

123
SHOP CART SUPPORT EQUIPMENT

124
SHOP CART SUPPORT EQUIPMENT

125
OMNI QUIP 250 CONCRETE BUGGY CONCRETE EQUIPMENT

126
OMNI QUIP WORK PRO 155 CONCRETE BUGGY CONCRETE EQUIPMENT

127
OMNI QUIP WORK PRO 155 CONCRETE BUGGY CONCRETE EQUIPMENT

128
TEMPO GAS CADDY SUPPORT EQUIPMENT

129
AIR LUBRICATION TANK SUPPORT EQUIPMENT

130
BARREL HAND TRUCK SUPPORT EQUIPMENT

131
SWELLEX TEST KIT SUPPORT EQUIPMENT

131
17.5IN. X 22IN. X 5IN. @ 7FT. 4IN., 7FT. 11IN., 15FT. 2IN. (3-TOTAL) STEEL I-BEAMS DRILLING EQUIPMENT

132
WHITEMAN POWER TROWEL SUPPORT EQUIPMENT

133
BARTELL-MORRISON B436 POWER TROWEL SUPPORT EQUIPMENT

134
POWER TROWEL

135
TROWEL BLADES

136
FORK EXTENSIONS ARE 84"

137
BARREL HAND TOOLS

138
BARREL HAND TRUCK

139
LATE ENTRY

140
LATE ENTRY

141
TORCH TANK

142
MILLER BIG BLUE 350 PIPE PRO HRS:286

142
PALLET OF WELDING RODS AND WIRE

143
MILLER MATIC 250 WELDER

144
BURCO MOSA WELDER

145
LINCOLN ELECTRIC AC225 ARC WELDER WELDER

146
VAL 6 INRNA RED OIL HEATER

147
VAL 6 KBE5L RED DIESEL HEATER

148
DAYTON 401C BTU OIL HEATER

148
UNIVERSAL 75-125,000 BTU HEASTER SUPPORT EQUIPMENT

149
R+D PARTS WASHER

150
CENTRAL PNEUMATIC 40LB FLOOR BLAST CABINET SUPPORT EQUIPMENT

151
LATE ENTRY

152
REGENT LIGHT STAND SUPPORT EQUIPMENT

153
CRAFTSMAN LIGHT STAND SUPPORT EQUIPMENT

154
CRAFTSMAN LIGHT STAND SUPPORT EQUIPMENT

155
LATE ENTRY

156
JET J-5550 SHOP DRILL PRESS SUPPORT EQUIPMENT

157
RIDGID 10IN. TABLE SAW W/ PORTABLE STAND SUPPORT EQUIPMENT

158
BOSCH 3PC BATTERY POWERED KIT W/ FLASH LIGHT, DRILL, SAW SUPPORT EQUIPMENT

159
HILTI TE55 HAMMER DRILL SUPPORT EQUIPMENT

160
HILTI TE56 HAMMER DRILL SUPPORT EQUIPMENT

161
MILWAUKEE HD HAMMER DRILL SUPPORT EQUIPMENT

162
BOSCH 11316 DEMO HAMMER SUPPORT EQUIPMENT

163
BOSCH 11316 DEMO HAMMER SUPPORT EQUIPMENT

164
APPROX (14) DRILL BITS SUPPORT EQUIPMENT

165
BOSCH 11224 VSR DRILL SUPPORT EQUIPMENT

166
MAKITA HR2811H HAMMER DRILL SUPPORT EQUIPMENT

167
MAKITA HR2811H HAMMER DRILL SUPPORT EQUIPMENT

168
HILTI UH650 ELECTRIC DRILL SUPPORT EQUIPMENT

169
RYOBI ELECTRIC DRILL SUPPORT EQUIPMENT

170
BOSCH ELECTRIC WRENCH SUPPORT EQUIPMENT

171
BOSCH 1752G RIGHT ANGLE GRINDER SUPPORT EQUIPMENT

172
MAKITA 9227C POLISHER SUPPORT EQUIPMENT

173
HILTI DXE72 POWDER ACUATED NAIL GUN SUPPORT EQUIPMENT

174
HILTI DX36 POWER ACUATED NAIL GUN SUPPORT EQUIPMENT

175
POWER FASTNER P7201 POWDER ACUATED NAIL GUN SUPPORT EQUIPMENT

176
RAMSET SA270 POWDER ACUATED NAIL GUN SUPPORT EQUIPMENT

177
MILWAUKEE ORBITAL SUPER SAWSALL SUPPORT EQUIPMENT

178
CHICAGO ELECTRIC DRILL SUPPORT EQUIPMENT

179
MILWAUKEE SAWSALL SUPPORT EQUIPMENT

180
MILWAUKEE ORBITAL SAWSALL SUPPORT EQUIPMENT

181
7 1/4IN. HD CIRCULAR SAW SUPPORT EQUIPMENT

182
SKILSAW 8 1/4IN. CIRCULAR SAW SUPPORT EQUIPMENT

183
PORTER CABLE ELECT. CIRCULAR SAW SUPPORT EQUIPMENT

184
SKILSAW 8IN. ELECT. CIRCULAR SAW SUPPORT EQUIPMENT

185
MILWAUKEE 7 1/4IN. ELECT. CIRCULAR SAW SUPPORT EQUIPMENT

186
MILWAUKEE 14IN. ABRASIVE CUT-OFF SAW SUPPORT EQUIPMENT

187
DEWALT D28715 ELECT CHOP SAW SUPPORT EQUIPMENT

188
DEWALT DW718 12IN. DOUBLE BEVEL SLIDING COMPOUND MITER SAW SUPPORT EQUIPMENT

189
ROCKWELL RK9000 JAW HORSE SUPPORT EQUIPMENT

190
LATE ENTRY

191
SCHUMACHER BATTERY CHARGER SUPPORT EQUIPMENT

192
NAPA BATTERY CHARGER SUPPORT EQUIPMENT

193
SOLAR BATTERY CHARGER SUPPORT EQUIPMENT

194
JNC 1224 JUMP PACK SUPPORT EQUIPMENT

195
DSR PRO SERIES JUMP PACK SUPPORT EQUIPMENT

196
LATE ENTRY

197
DRAFTING TABLE SUPPORT EQUIPMENT

198
HILTI PR60 ROTARY LASER W/ TRIPOD SUPPORT EQUIPMENT

199
800HV ROTARY LASER SUPPORT EQUIPMENT

200
HILTI PR16 ROTARY LASER SUPPORT EQUIPMENT

201
HILTI PR2-HS ROTARY LASER SUPPORT EQUIPMENT

201
(2) GRADE RODS SUPPORT EQUIPMENT

201
LEKA TCR403 REFLECTORLESS TOTAL STATION SUPPORT EQUIPMENT

202
(2) BOTTLE JACKS SUPPORT EQUIPMENT

203
SUMP PUMP SUPPORT EQUIPMENT

204
EVERBILT SUMP PUMP SUPPORT EQUIPMENT

205
MULTIQUIP SUMP PUMP SUPPORT EQUIPMENT

206
MUSTANG MP4800 SUMP PUMP SUPPORT EQUIPMENT

207
MUSTANG MP4800 SUMP PUMP SUPPORT EQUIPMENT

208
MUSTANG MP4800 SUMP PUMP SUPPORT EQUIPMENT

209
2IN. SUMP PUMP SUPPORT EQUIPMENT

210
WACKER PT3 TRASH PUMP SUPPORT EQUIPMENT

211
TITAN HD 3IN. TRASH PUMP SUPPORT EQUIPMENT

212
HONDA EU1000 GENERATOR SUPPORT EQUIPMENT

213
HONDA EB2500 GENERATOR SUPPORT EQUIPMENT

214
RIDGID FM12180 GENERATOR SUPPORT EQUIPMENT

215
TITAN 8000 HIGH PERFORMANCE GENERATOR SUPPORT EQUIPMENT

216
BRIGGS & STRATTON 5550 WATT GENERATOR SUPPORT EQUIPMENT

217
HOMELIT LB5550 GENERATOR SUPPORT EQUIPMENT

218
8IN. & 6IN. PIPE TESTING PLUGS SUPPORT EQUIPMENT

219
MAKITA ELECT JACK HAMMER W/ HAMMER CART SUPPORT EQUIPMENT

220
DARDA C-12 HYDRAULIUC ROCK SPLITTER SUPPORT EQUIPMENT

221
DARDA C-12 HYDRAULIUC ROCK SPLITTER SUPPORT EQUIPMENT

222
DARDA C-12 HYDRAULIUC ROCK SPLITTER SUPPORT EQUIPMENT

223
DARDA C-12 HYDRAULIUC ROCK SPLITTER SUPPORT EQUIPMENT

224
DARDA C-12 HYDRAULIUC ROCK SPLITTER SUPPORT EQUIPMENT

225
DARDA C-12 HYDRAULIUC ROCK SPLITTER SUPPORT EQUIPMENT

226
HYDRAULIC POWER PACK SUPPORT EQUIPMENT

227
HYDRAULIC POWER PACK SUPPORT EQUIPMENT

228
HYDRAULIC POWER PACK SUPPORT EQUIPMENT

229
HYDRAULIC POWER PACK SUPPORT EQUIPMENT

230
HYDRAULIC POWER PACK SUPPORT EQUIPMENT

231
HYDRAULIC POWER PACK SUPPORT EQUIPMENT

232
REPLACEMENT FEATHERS & WEDGE SUPPORT EQUIPMENT

233
REPLACEMENT FEATHERS & WEDGE SUPPORT EQUIPMENT

234
REPLACEMENT FEATHERS & WEDGE SUPPORT EQUIPMENT

235
REPLACEMENT WEDGES SUPPORT EQUIPMENT

236
SPARE DARDA C-12 HANDLES SUPPORT EQUIPMENT

237
SHOP CART FULL OF NEW GLOVES SUPPORT EQUIPMENT

238
LARGE BOX OF NEW GLOVES SUPPORT EQUIPMENT

239
LARGE BOX OF NEW GLOVES SUPPORT EQUIPMENT

240
LARGE BOX OF NEW GLOVES SUPPORT EQUIPMENT

241
LARGE BOX OF NEW GLOVES SUPPORT EQUIPMENT

242
LARGE BOX OF NEW GLOVES SUPPORT EQUIPMENT

243
(2) ALUMINUM WHEELS SUPPORT EQUIPMENT

244
(2) ALUMINUM WHEELS SUPPORT EQUIPMENT

245
(2) P215/50R17 TIRES ON ALLOY WHEELS SUPPORT EQUIPMENT

246
LATE ENTRY

247
LATE ENTRY

248
LATE ENTRY

249
TOOL BOX SUPPORT EQUIPMENT

250
WALKBEHIND ROLLER SUPPORT EQUIPMENT

251
APPROX 20 ROLLS OF PUMP DISCHARGE HOSE & HOSE COUPLERS SUPPORT EQUIPMENT

252
GRIPHOIST T-20 SUPPORT EQUIPMENT

253
GRIPHOIST T-20 SUPPORT EQUIPMENT

254
GRIPHOIST T-20 SUPPORT EQUIPMENT

255
BATTERY POWERED CONCRETE VIBRATOR SUPPORT EQUIPMENT

256
STOW CONCRETE VIBRATOR SUPPORT EQUIPMENT

257
CONCRETE VIBRATOR SUPPORT EQUIPMENT

258
CONCRETE VIBRATOR SUPPORT EQUIPMENT

259
CONCRETE VIBRATOR SUPPORT EQUIPMENT

260
WACKER CONCRETE VIBRATOR SUPPORT EQUIPMENT

261
CONCRETE VIBRATOR SUPPORT EQUIPMENT

262
CONCRETE VIBRATOR SUPPORT EQUIPMENT

263
CONCRETE VIBRATOR SUPPORT EQUIPMENT

264
BACKPACK CONCRETE VIBRATOR SUPPORT EQUIPMENT

265
RIDGID 60IN. PIPE WRENCH SUPPORT EQUIPMENT

266
(2) RIDGID 48IN. PIPE WRENCHES SUPPORT EQUIPMENT

267
(4) ASSORTED PIPE WRENCHES SUPPORT EQUIPMENT

268
(6) ROLLS OF AIR HOSE SUPPORT EQUIPMENT

269
(3) ROLLS OF GROUT HOSE SUPPORT EQUIPMENT

270
QTY OF SLEDGE HAMMER HEADS, PICK HEADS, HANDLES SUPPORT EQUIPMENT

270
HUSKY 150PSI PORTABLE ELECTRIC AIR COMPRESSOR SUPPORT EQUIPMENT

271
80LB JACK HAMMER SUPPORT EQUIPMENT

272
80LB JACK HAMMER SUPPORT EQUIPMENT

273
80LB JACK HAMMER SUPPORT EQUIPMENT

274
APT JACK HAMMER SUPPORT EQUIPMENT

275
80LB JACK HAMMER SUPPORT EQUIPMENT

276
80LB JACK HAMMER SUPPORT EQUIPMENT

277
SULLAIR JACK HAMMER SUPPORT EQUIPMENT

278
SULLAIR JACK HAMMER SUPPORT EQUIPMENT

279
SULLAIR JACK HAMMER SUPPORT EQUIPMENT

280
APT RIVET BUSTER SUPPORT EQUIPMENT

281
APT RIVET BUSTER SUPPORT EQUIPMENT

282
APT RIVET BUSTER SUPPORT EQUIPMENT

283
APT RIVET BUSTER SUPPORT EQUIPMENT

284
APT RIVET BUSTER SUPPORT EQUIPMENT

285
APT RIVET BUSTER SUPPORT EQUIPMENT

286
APT RIVET BUSTER SUPPORT EQUIPMENT

287
SULLAIR RIVET BUSTER SUPPORT EQUIPMENT

287
LATE ENTRY

288
RIVET BUSTER SUPPORT EQUIPMENT

289
RIVET BUSTER SUPPORT EQUIPMENT

290
RIVET BUSTER SUPPORT EQUIPMENT

291
SULLAIR RIVET BUSTER SUPPORT EQUIPMENT

292
CHIPPING HAMMER SUPPORT EQUIPMENT

293
APT RIVET BUSTER SUPPORT EQUIPMENT

294
CHIPPING HAMMER SUPPORT EQUIPMENT

295
ROCK DRILL SUPPORT EQUIPMENT

296
ROCK DRILL SUPPORT EQUIPMENT

297
ROCK DRILL SUPPORT EQUIPMENT

298
QTY OF AIR & WATER VALVES SUPPORT EQUIPMENT

299
QTY OF JACK HAMMER POINTS & CHISELS SUPPORT EQUIPMENT

300
QTY OF CLAY SPADE BITS SUPPORT EQUIPMENT

301
QTY OF DRILL STEEL SUPPORT EQUIPMENT

302
BIN OF RIVET BUSTER POINTS SUPPORT EQUIPMENT

303
MISC TOOLS SUPPORT EQUIPMENT

304
MISC LIFTING HOOKS SUPPORT EQUIPMENT

305
(5) PICKS SUPPORT EQUIPMENT

306
(14) SMALL SLEDGE HAMMERS SUPPORT EQUIPMENT

307
(9) LARGE SLEDGE HAMMERS SUPPORT EQUIPMENT

308
QTY OF NAIL PULLER BARS & PRY BARS SUPPORT EQUIPMENT

309
(2) MANUAL ROLLERS SUPPORT EQUIPMENT

310
BOX OF FLASHING LIGHTS SUPPORT EQUIPMENT

311
QTY OF ASSORTED BUCKET TEETH SUPPORT EQUIPMENT

312
PALLET OF MISC PINS SUPPORT EQUIPMENT

313
ALLEN ENGINEERING VIBRATING SCREED SUPPORT EQUIPMENT

314
VIBRASTRIKE VIBRATING SCREED SUPPORT EQUIPMENT

315
VIBRASTIKE 5FT & 16FT. REPLACEMENT SCREEDS SUPPORT EQUIPMENT

316
(2) CRATES OF CEMENT FINISHING TOOLS SUPPORT EQUIPMENT

317
CRATE OF NEW CONCRETE ANCHOR STRAPS SUPPORT EQUIPMENT

318
LATE ENTRY

319
RIDE ON CONCRETE POWER TROWEL SUPPORT EQUIPMENT

320
RIDE ON CONCRETE POWER TROWEL SUPPORT EQUIPMENT

320
POWER TROWELL TRANSPORT WHEELS AND HANDLE

321
REPLACEMENT POWER TROWEL BLADES SUPPORT EQUIPMENT

321
LATE ENTRY

322
FILL-RITE ELECT. FUEL PUMP W/ NOZZLE SUPPORT EQUIPMENT

323
FILL-RITE ELECT. FUEL PUMP W/ NOZZLE SUPPORT EQUIPMENT

324
FILL-RITE ELECT. FUEL PUMP W/ NOZZLE SUPPORT EQUIPMENT

325
MARATHON FUEL PUMP SUPPORT EQUIPMENT

326
(4) PIPE STANDS SUPPORT EQUIPMENT

327
(4) 2IN. AIR HOSE SUPPORT EQUIPMENT

328
(4) 2IN. AIR HOSE SUPPORT EQUIPMENT

329
(3) 2IN. AIR HOSES & MISC HOSE SUPPORT EQUIPMENT

330
PAIL OF AIR HOSE COUPLERS SUPPORT EQUIPMENT

331
CRATE OF 1/2IN. D-RINGS SUPPORT EQUIPMENT

332
RACK & CONTENTS, FUEL CANS, HOSE, MISC SUPPORT EQUIPMENT

333
(2) HARRINGTON 3 TON HOISTS, LIFTING CHAINS, CABLES, & MISC SUPPORT EQUIPMENT

334
PALLET OF PUMP SUCTION HOSE SUPPORT EQUIPMENT

335
BICYCLE TAXI SUPPORT EQUIPMENT

336
JOHN DEERE 3 SPEED BICYCLE SUPPORT EQUIPMENT

337
LATE ENTRY

338
GENIE RL4 LIGHT PLANT SN:6437 powered by Kubota diesel engine, equipped with 4-1,000 watt lightbulbs, trailer mounted, 5 hours. BILL OF SALE

339
GENIE RL4 LIGHT PLANT SN:6438 powered by Kubota diesel engine, equipped with 4-1,000 watt lightbulbs, trailer mounted, 5 hours. BILL OF SALE

340
CONTENTS OF (2) LOWER RACKS, GRADE RODS, 6FT-10FT. DRILL STEEL, TOOL BOX ON GROUND SUPPORT EQUIPMENT

341
ALLMAND LIGHT PLANT SN:1134PR003 powered by Kubota diesel engine, equipped with 4-1,000 watt lightbulbs, 6KW, trailer mounted, 1,909 hours. BILL OF SALE

342
METAL BENDER SUPPORT EQUIPMENT

343
MULTIQUIP MB-25HD REBAR BENDER SUPPORT EQUIPMENT

344
MULTIQUIP MB-25HD REBAR BENDER SUPPORT EQUIPMENT

345
MANUAL REBAR BENDER SUPPORT EQUIPMENT

345
MULTIQUIP HBC-25N ELECTRO-HYDRAULIC REBAR CUTTER SUPPORT EQUIPMENT

346
HOTSY 4000PSI PRESSURE WASHER SUPPORT EQUIPMENT

347
EMILIANA SERBATOR FUEL TANK W/ PUMP & CONTAINMENT FUEL TANK

348
EMILIANA SERBATOR FUEL TANK W/ PUMP & CONTAINMENT FUEL TANK

349
PALLET OF MISC LIFTING STRAPS SUPPORT EQUIPMENT

350
INGERSOLL RAND G25 GENERATOR SN:387115 powered by Ingersoll Rand diesel engine, equipped with 25KW, trailer mounted. BILL OF SALE

351
INGERSOLL RAND POWERSOURCE G10 AIR COMPRESSOR SN:373894 powered by Ingersoll Rand diesel engine, equipped with 10KW, 1,046 hours. BILL OF SALE

352
2009 DOOSAN G25E-5 FORKLIFT SN:MF-00653 powered by LP engine, equipped with OROPS, 5,000lb lift capacity, 3-stage mast, Cam sytem hydraulic side shift, 48in. Forks.

352
TOYOTA FGC15 FORKLIFT SN:1195 powered by LP engine, equipped with OROPS, 2-stage mast, 42in. Forks, 2,076 hours.

353
HYSTER 30 FORKLIFT SN:C001B04958G electric powered, equipped with OROPS, 3,000lb lift capacity, 2-stage mast, 60in. Forks.

353
FORKLIFT PROPANE TANK

353
FORKLIFT PROPANE TANK

353
FORKLIFT PROPANE TANK

354
LIFTING HOOKS, LIFTING EYES ON GROUND SUPPORT EQUIPMENT

355
PALLET OF FILTER FABRIC SUPPORT EQUIPMENT

356
QTY OF 4IN. X 4IN. CONCRETE FORMING, TIMBERS UP ON RACKS CONCRETE EQUIPMENT

357
FIRST (2) LIFTS OF ADVANCE LATCHING CONCRETE FORMS: 2FT X 8FT PANELS & MISC CONCRETE EQUIPMENT

358
SECOND (2) LIFTS OF ADVANCE LATCHING CONCRETE FORMS: 8FT. 2FT. & 8FT. X 1FT. CONCRETE EQUIPMENT

359
THIRD (2) LIFTS OF ADVANCE LATCHING CONCRETE FORMS: 8FT. 2FT. & MISC FORMS CONCRETE EQUIPMENT

360
FOURTH (2) LIFTS OF ADVANCE LATHCING FORMS: 8FT. 2FT. & MISC FORMS CONCRETE EQUIPMENT

361
QTY OF FORM HARDWARE ON THE GROUND IN PAILS & STACKED UP & ON RACKS CONCRETE EQUIPMENT

362
INGERSOLL RAND 7/26E AIR COMPRESSOR SN:5Y106295 powered by Ingersoll Rand diesel engine, trailer mounted. BILL OF SALE

363
AIRMAN PDS185S AIR COMPRESSOR SN:B46B41554 powered by Nissan diesel engine, equipped with 185CFM, trailer mounted. BILL OF SALE

364
SULLAIR 250 AIR COMPRESSOR SN:N/A powered by John Deere diesel engine, equipped with 250CFM, trailer mounted. BILL OF SALE

365
SULLAIR 1600HAF AIR COMPRESSOR SN:N/A powered by Cat C15 diesel engine, 535HP, equipped with 1600CFM, ST235/80R16 tires, trailer mounted. BILL OF SALE

366
KUBOTA UTILITY VEHICLE 4x4, powered by diesel engine, equipped with OROPS, utility body. BILL OF SALE

367
BENFORD TX1200DPR ASPHALT ROLLER SN:EX11CC212 powered by Deutz diesel engine, equipped with ROPS, 47in. Smooth drum, vibratory drum, double drum, water system.

368
DYNAPAC CC1000 ASPHALT ROLLER SN:90130072 powered by diesel engine, equipped with ROPS, 40in. Smooth drum, vibratory drum, double drum, drum drive, water system, 197 hours. 

369
LEEBOY 8500LD ASPHALT PAVER SN:2877LD powered by 4 cylinder diesel engine, truck hitch, 480 hours. 

370
2009 WACKER 1001 FRONT END DUMP SN:AB101041H AWD, powered by Yanmar diesel engine, equipped with ROPS, front end dumper, 10.0/75-15.3 tires.

371
BENFORD 6000 FRONT END DUMP SN:AH334 AWD, powered by diesel engine, equipped with OROPS, front end dump.

372
LATE ENTRY

373
LATE ENTRY

374
LATE ENTRY

375
2017 FREIGHTLINER ARGOSY COE GLIDER TRUCK TRACTOR VN:HT8713 powered by Detroit Series 60 diesel engine, equipped with Road Ranger 18 speed transmission with 2 speed rear axle, DCF, rear view camera, Airliner suspension Hendrickson air lift steerable pu
2017 FREIGHTLINER ARGOSY COE GLIDER TRUCK TRACTOR VN:HT8713 powered by Detroit Series 60 diesel engine, equipped with Road Ranger 18 speed transmission with 2 speed rear axle, DCF, rear view camer...

376
2008 NOOTEBOOME EURO 92-04 DETACHABLE GOOSENECK TRAILER VN:000701 equipped with non ground bearing, steel deck over wheels, variable extendable deck up to 18'3", 9'10" wide deck, outriggers, Hatz diesel power pack, 4 amber beacon lights, 2 axle interdolly
2008 NOOTEBOOME EURO 92-04 DETACHABLE GOOSENECK TRAILER VN:000701 equipped with non ground bearing, steel deck over wheels, variable extendable deck up to 18'3", 9'10" wide deck, outriggers, Hatz d...

377
1983 STECO DUMP TRUCK VN:N/A powered by diesel engine, equipped with dump body, tarp system, 80,000lb single point suspension, all matching 24in. Radial rubber, truck is a tandem axle, trailer portion is a tandem axle.
1983 STECO DUMP TRUCK VN:N/A powered by diesel engine, equipped with dump body, tarp system, 80,000lb single point suspension, all matching 24in. Radial rubber, truck is a tandem axle, trailer port...

378
1996 FORD E350 VAN TRUCK VN:A12088 powered by Powerstroke diesel engine, equipped with automatic transmission, power steering, van body, LA440 hydraulic lowering rear door/gate, dual wheel single axle.
1996 FORD E350 VAN TRUCK VN:A12088 powered by Powerstroke diesel engine, equipped with automatic transmission, power steering, van body, LA440 hydraulic lowering rear door/gate, dual wheel single a...

379
2008 FORD F250 PICKUP TRUCK VN:15467 2008 Ford F250 pickup truck, VIN 1FTSX20578ED15467, 5.4L gas engine, 177261 miles

380
1984 CHEVY 30 PICKUP TRUCK VN:133508 powered by gas engine, equipped with automatic transmission, power steering, dual wheel single axle.

381
1991 MERCEDES BENZ 350SEL TURBO VIN:591465 4 DOOR MILES:91,277.

382
LATE ENTRY

383
LATE ENTRY

384
CAT 428C TRACTOR LOADER BACKHOE SN:2CR21714 4x4, powered by Cat diesel engine, equipped with EROPS, 3rd valve hydraulics, side shift backhoe with extendahoe, rear auxiliary hydraulics, vertical outriggers, rear hydraulic coupler, 4-in-1 front bucket w/ te
CAT 428C TRACTOR LOADER BACKHOE SN:2CR21714 4x4, powered by Cat diesel engine, equipped with EROPS, 3rd valve hydraulics, side shift backhoe with extendahoe, rear auxiliary hydraulics, vertical out...

385
HYDRAULIC HAMMER TRACTOR LOADER BACKHOE ATTACHMENT

386
30IN. DIGGING BUCKET TRACTOR LOADER BACKHOE ATTACHMENT fits Cat 428.

387
40IN. SLAB BUCKET TRACTOR LOADER BACKHOE ATTACHMENT

387
WERK BRAU RIPPER TOOTH TRACTOR LOADER BACKHOE ATTACHMENT

388
CAT 980F SERIES II RUBBER TIRED LOADER SN:8JN00448 powered by Cat diesel engine, equipped with EROPS, SKF Vogel autolube system, GP bucket w/ BOCE, 29.5R25 rubber.

389
LATE ENTRY

390
2015 WEBER STAHL MULDY 3500 DUMP TRAILER VN:W88001 equipped with tilting body, tail gate, ramps, T85R14C tires, tandem axle.

391
2007 ROUGH RIDER UTILITY TRAILER VN:024950 equipped with 5ft. X 10ft. Deck, aluminum, removeable sides, single axle.

392
EAGER BEAVER 20HAL TAGALONG TRAILER VN:N/A equipped with 20 ton capacity, rear ramps, air brakes, dual wheels, tandem axle.

393
(2) CONCRETE HOPPERS CONCRETE EQUIPMENT

394
CONCRETE BULL FLOATS & FINISHING BROOMS CONCRETE EQUIPMENT

395
CONCRETE COME-A-LONGS & FINISHING TOOLS CONCRETE EQUIPMENT

396
PIN CONNECT EXTENSION HANDLES CONCRETE EQUIPMENT

397
THREADED EXTENSION HANDLES & MOUNTING CONNECTORS CONCRETE EQUIPMENT

398
(6) NEW THREADED EXTENSION HANDLES CONCRETE EQUIPMENT

399
(7) MORTAR TUBS CONCRETE EQUIPMENT

400
CONCRETE BUCKET CONCRETE EQUIPMENT

401
(2) MAGNESIUM SCREEDS CONCRETE EQUIPMENT

402
(5) CONCRETE CHUTES CONCRETE EQUIPMENT

403
CONCRETE LAYDOWN BUCKET CONCRETE EQUIPMENT

404
GAR-BRO CONCRETE LAYDOWN BUCKET CONCRETE EQUIPMENT

405
ALUMINUM CONCRETE LAYDOWN BUCKET CONCRETE EQUIPMENT

406
LATE ENTRY

407
21FT. HOOKLIFT FLATBED HOOK LIFT ATTACHMENT

408
J.C. INDUSTRIES HOOKLIFT CONTAINER HOOK LIFT ATTACHMENT 42in. Walls, swing tailgate.

409
COOPER TANK 20FT. HOOKLIFT CONTAINER HOOK LIFT ATTACHMENT 42in. Walls, swing tailgate.

410
J.C. INDUSTRIES 20FT. HOOKLIFT CONTAINER HOOK LIFT ATTACHMENT 63in. Walls, swing tailgate.

411
J.C. INDUSTRIES 20FT. HOOKLIFT CONTAINER HOOK LIFT ATTACHMENT 63in. Walls, swing tailgate.

412
LATE ENTRY

413
LATE ENTRY

414
HITACHI EX550 HYDRAULIC EXCAVATOR SN:17A1016 powered by diesel engine, equipped with Cab, reach boom, digging bucket, long undercarriage.

414
QUICK COUPLER LIFTING HOOK

415
MSB HYDRAULIC HAMMER HYDRAULIC HAMMER SN:9009D012 fot EX550.

416
2015 DOOSAN DX480LCA-HD HYDRAULIC EXCAVATOR SN:1010598 powered by Doosan DE12T1S diesel engine, equipped with Cab, air, auxiliary hydraulics, 24in. pads, hydraulic quick coupler, 60in. digging bucket, expandable undercarriage, long undercarriage, 525 hour
2015 DOOSAN DX480LCA-HD HYDRAULIC EXCAVATOR SN:1010598 powered by Doosan DE12T1S diesel engine, equipped with Cab, air, auxiliary hydraulics, 24in. pads, hydraulic quick coupler, 60in. digging buck...

417
NEW D & A SILENCE 450DP HYDRAULIC HAMMER HYDRAULIC HAMMER autogrease, chisel point, bull point and blunt end tools, Tool box with nitrogen charging kit.

418
2016 DOOSAN DX225LC-3 HYDRAULIC EXCAVATOR SN:2074 powered by Doosan 5.89L diesel engine, equipped with Cab, air, rearview camera, auxiliary hydraulics, Miller hydraulic quick coupler, Cab care guardrail system, digging bucket, 759 hours.
2016 DOOSAN DX225LC-3 HYDRAULIC EXCAVATOR SN:2074 powered by Doosan 5.89L diesel engine, equipped with Cab, air, rearview camera, auxiliary hydraulics, Miller hydraulic quick coupler, Cab care guar...

419
KOMATSU PC228UCLC-3 HYDRAULIC EXCAVATOR SN:20890 powered by Komatsu diesel engine, equipped with Cab, air, Lincoln autolube, auxiliary hydraulics, 31.5" TBG pads, hydraulic coupler, 42in. Digging bucket, long undercarriage.
KOMATSU PC228UCLC-3 HYDRAULIC EXCAVATOR SN:20890 powered by Komatsu diesel engine, equipped with Cab, air, Lincoln autolube, auxiliary hydraulics, 31.5" TBG pads, hydraulic coupler, 42in. Digging b...

420
FURUKAWA FX275 HYDRAULIC HAMMER HYDRAULIC HAMMER

421
SAMSUNG SE130CL HYDRAULIC EXCAVATOR SN:DAY0435 powered by Cummins diesel engine, equipped with Cab, auxiliary hydraulics, 28" TBG pads, 36in. Digging bucket w/ Mazz hydraulic thumb, long undercarriage.
SAMSUNG SE130CL HYDRAULIC EXCAVATOR SN:DAY0435 powered by Cummins diesel engine, equipped with Cab, auxiliary hydraulics, 28" TBG pads, 36in. Digging bucket w/ Mazz hydraulic thumb, long undercarri...

422
JOHN DEERE 110 HYDRAULIC EXCAVATOR SN:20025 powered by John Deere diesel engine, equipped with Cab, front blade, 28" TBG pads, 32in. Digging bucket.

423
NEW D & A SILENCE 180DP HYDRAULIC HAMMER HYDRAULIC HAMMER with chisel point, bull point and blunt end tools, tool box with nitrogen charging kit.

424
NEW D & A SILENCE 230DP HYDRAULIC HAMMER HYDRAULIC HAMMER with chisel point, bull point and blunt end tools, tool box with nitrogen charging kit.

424
TRAMAC BRV32 HYDRAULIC HAMMER HYDRAULIC HAMMER

425
MSB HYDRAULIC HAMMER HYDRAULIC HAMMER

426
2025 DAEDONG FNG BR24 VIBRO PICK VIBRO RIPPER SN:MBF041

427
PRO DRILL EXCAVATOR ATTACHMENT

428
2016 DOYLE ENGINEERING RAPID HITCH 100E VIBRO POST DRIVER 

429
DAEDONG FNG VIBRATING SHEATHING DRIVER VIBRATING SHEATHING DRIVER rotating head, new jaw.

430
NEW BODINE T1-200 CONCRETE PULVERIZER CONCRETE PULVERIZER 80/80mm, to fit Cat 320/325, Komatsu PC200/250 and similar size machines.

431
NEW BODINE T1-200 MULTI SHEAR MULTI SHEAR 80/80mm, to fit Cat 320/325, Komatsu PC200/250 and similar size machines.

432
SEC 5-TYNE HYDRAULIC DEMO GRAPPLE 

433
NEW BODINE T1-200 GRAPPLE GRAPPLE 80/80mm, to fit Cat 320/325, Komatsu PC200/250 and similar size machines.

434
72IN. DIGGING BUCKET EXCAVATOR BUCKET fot DX480.

435
72IN. DITCHING BUCKET EXCAVATOR BUCKET for PC228.

436
18IN. DIGGING BUCKET EXCAVATOR BUCKET for PC228.

437
RIPPER TOOTH XTRA TIPS EXCAVATOR ATTACHMENT for PC228.

438
CP 54IN. DIGGING BUCKET EXCAVATOR BUCKET for PC228.

439
BODINE 40IN. SLAB BUCKET EXCAVATOR BUCKET

440
HYDRAULIC SIDESHIFT 76IN. FORKS EXCAVATOR ATTACHMENT

441
BOBCAT 66IN. GRAPPLE BUCKET SKID STEER ATTACHMENT

442
KOMATSU 9FT. 6IN. STICK EXCAVATOR ATTACHMENT

443
25FT. LONG REACH STICK W/ LINKAGE & 36IN. DIGGING BUCKET EXCAVATOR ATTACHMENT

444
LATE ENTRY

445
LATE ENTRY

446
HUTTE & CO. BOHRTECHNIK HRR605 TIE BACK DRILL DRILLING RIG powered by Deutz 6 cylinder air cooled diesel engine, equipped with water injection system, 18" TBG pads, 1,465 hours.

447
2008 CASA GRANDE B135 DEEP FOUNDATION DRILLING RIG DRILLING SN:B135Z00111 powered by Cummins diesel engine, equipped with 23" TBG pads, Kelly Bar, hydraulic extendable U/C, with components to convert ot a micropile or double wall caisson drill, torque red
2008 CASA GRANDE B135 DEEP FOUNDATION DRILLING RIG DRILLING SN:B135Z00111 powered by Cummins diesel engine, equipped with 23" TBG pads, Kelly Bar, hydraulic extendable U/C, with components to conve...

448
LATE ENTRY

449
BUNDLE OF 30FT. THREADED ROD DRILLING EQUIPMENT

450
BUNDLE OF MISC THREADED ROD, REBAR, & STEEL FLATBAR DRILLING EQUIPMENT

451
21FT. 10IN. X 9 5/8IN. DRILL ROD W/ 7IN. BEECO THREAD DRILLING EQUIPMENT

452
20FT. 2 X 10FT. X 9 5/8IN. DRILL ROD W/ 7IN. BEECO THREAD DRILLING EQUIPMENT

453
20FT. 2 X 10FT. X 9 5/8IN. DRILL ROD W/ 7IN. BEECO THREAD DRILLING EQUIPMENT

454
16FT. (1FT., 10FT., 5FT.) X 9 5/8IN. DRILL ROD W/ 7IN. BEECO THREAD DRILLING EQUIPMENT

455
10FT. X 9 5/8IN. DRILL ROD W/ 7IN. BEECO THREAD DRILLING EQUIPMENT

456
2FT. X 9 5/8IN. DRILL ROD W/ 7IN. BEECO THREAD DRILLING EQUIPMENT

457
12IN. X 9 5/8IN. DRILL ROD W/ 7IN. BEECO THREAD DRILLING EQUIPMENT

458
35FT. 2.5IN. (6IN, (3) 5FT, 10FT, 2FT; (2) 3FT, 21 1/2IN.) X 4.5IN. DRILL ROD W/ BOX PIN API REGULAR THREAD DRILLING EQUIPMENT

459
29FT. 6IN. (6IN, 1FT, 5FT, 20FT) X 4.5IN. DRILL ROD W/ BOX PIN API REGULAR THREAD & 5IN. STEEL TRICONE BIT DRILLING EQUIPMENT

460
25FT. (20FT, 5FT) X 4.5IN. DRILL ROD W/ BOX PIN API REGULAR THREAD DRILLING EQUIPMENT

461
15FT. (10FT, 5FT) X 4.5IN. DRILL ROD W/ BOX PIN API REGULAR THREAD DRILLING EQUIPMENT

462
10FT. X 4.5IN. DRILL ROD W/ BOX PIN API REGULAR THREAD DRILLING EQUIPMENT

463
16IN. X 4.5IN.; 3FT. X 4.5IN.; 6IN. X 4.5IN.; 16IN. X 5.5IN. DRILL ROD SECTIONS BOX PIN API REGULAR THREAD DRILLING EQUIPMENT

464
LATE ENTRY

465
LATE ENTRY

466
UNUSED HM 27000 AUGER DRIVE EXCAVATOR ATTACHMENT

467
HM 27000 AUGER DRIVE EXCAVATOR ATTACHMENT

468
10FT. X 20IN. AUGER BIT DRILLING EQUIPMENT

469
9FT. 6IN. X 20IN. AUGER BIT EXTENSION DRILLING EQUIPMENT

470
5FT. X 42IN. AUGER BIT DRILLING EQUIPMENT

471
UNUSED 4FT. X 20IN. AUGER BIT DRILLING EQUIPMENT

472
UNUSED 4FT. X 16IN. AUGER BIT DRILLING EQUIPMENT

473
4FT. X 20IN. AUGER BIT DRILLING EQUIPMENT

474
4FT. X 16IN. AUGER BIT DRILLING EQUIPMENT

475
42IN. X 16IN. AUGER BIT DRILLING EQUIPMENT

476
42IN. X 12IN. AUGER BIT DRILLING EQUIPMENT

477
UNUSED 42IN. X 4IN. AUGER BIT DRILLING EQUIPMENT

478
UNUSED 42IN. X 6IN. AUGER BIT DRILLING EQUIPMENT

479
UNUSED 42IN. X 8IN. AUGER BIT DRILLING EQUIPMENT

480
4IN. TO 3IN. AUGER DRIVE COUPLING W/ (3) 3IN. COUPLERS DRILLING EQUIPMENT

481
12.5FT. AUGER EXTENSION DRILLING EQUIPMENT

482
9FT. AUGER EXTENSION DRILLING EQUIPMENT

483
9FT. AUGER EXTENSION DRILLING EQUIPMENT

484
6FT. 2IN. AUGER EXTENSION DRILLING EQUIPMENT

485
6FT. 2IN. AUGER EXTENSION DRILLING EQUIPMENT

486
5FT. 8IN. AUGER EXTENSION DRILLING EQUIPMENT

487
5FT. 1IN. AUGER EXTENSION DRILLING EQUIPMENT

488
5FT. 1IN. AUGER EXTENSION DRILLING EQUIPMENT

489
4FT. AUGER EXTENSION DRILLING EQUIPMENT

490
4FT. AUGER EXTENSION DRILLING EQUIPMENT

491
3FT. AUGER EXTENSION DRILLING EQUIPMENT

492
3FT. AUGER EXTENSION DRILLING EQUIPMENT

493
LATE ENTRY

494
CAISSON DRIVE ADAPTER DRILLING EQUIPMENT

495
CAISSON DRIVE ADAPTER DRILLING EQUIPMENT

496
HOMEMADE J-SLOT DRIVE ADAPTER DRILLING EQUIPMENT

497
24IN. DOUBLE WALL CAISSON MALE/ FEMALR WELD-ON ADAPTER DRILLING EQUIPMENT

498
24IN. DOUBLE WALL CAISSON MALE/ FEMALR WELD-ON ADAPTER DRILLING EQUIPMENT

499
24IN. CUTTING SHOE DRILLING EQUIPMENT

500
20IN. BULLET TOOTH CORE BARREL, 8IN. KELLY BOX DRILLING EQUIPMENT

501
20IN. MUCK BUCKET, 8IN. KELLY BOX DRILLING EQUIPMENT

502
20IN. ROLLER BIT CORE BARREL, 8IN. KELLY BOX DRILLING EQUIPMENT

503
24IN. ROCK AUGER, 8IN. KELLY BOX DRILLING EQUIPMENT

504
20IN. FILL AUGER, 8IN. KELLY BOX DRILLING EQUIPMENT

505
20IN. ROCK AUGER, 8IN. KELLY BOX DRILLING EQUIPMENT

506
20IN. ROCK AUGER, 8IN. KELLY BOX DRILLING EQUIPMENT

507
(2) BOXES OF BULLET TEETH DRILLING EQUIPMENT

507
(2) BOXES OF BULLET TOOTH HOLDERS DRILLING EQUIPMENT

508
24IN. X 5 METER DOUBLE WALL CAISSON W/ CONICAL BOLTS DRILLING EQUIPMENT

509
24IN. X 5 METER DOUBLE WALL CAISSON W/ CONICAL BOLTS & CUTTING SHOE DRILLING EQUIPMENT

509
24" CUTTING SHOE

510
24IN. X 4 METER DOUBLE WALL CAISSON W/ CONICAL BOLTS DRILLING EQUIPMENT

511
24IN. X 4 METER DOUBLE WALL CAISSON W/ CONICAL BOLTS DRILLING EQUIPMENT

512
24IN. X 4 METER DOUBLE WALL CAISSON W/ CONICAL BOLTS DRILLING EQUIPMENT

513
24IN. X 15 METER STARTER PIPE W/ J-TEETH DRILLING EQUIPMENT

514
24IN. X 15 METER STARTER PIPE W/ J-TEETH DRILLING EQUIPMENT

515
24IN. X 15 SINGLE WALL MALE-FEMAL CAISSON DRILLING EQUIPMENT

516
24IN. X 15 SINGLE WALL MALE-FEMAL CAISSON DRILLING EQUIPMENT

517
24IN. X 15 SINGLE WALL MALE-FEMAL CAISSON DRILLING EQUIPMENT

518
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

519
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

520
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

521
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

522
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

523
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

524
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

525
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

526
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

527
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

528
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

529
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

530
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

531
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

532
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

533
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

534
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

535
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

536
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

537
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

538
BOX OF 20 CAISSON CUTTING SHOE TEETH DRILLING EQUIPMENT

539
BOX OF 20 CAISSON CUTTING SHOE TEETH DRILLING EQUIPMENT

540
BOX OF 20 CAISSON CUTTING SHOE TEETH DRILLING EQUIPMENT

541
BOX OF 20 CAISSON CUTTING SHOE TEETH DRILLING EQUIPMENT

542
BOX OF 20 CAISSON CUTTING SHOE TEETH DRILLING EQUIPMENT

543
BOX OF 8 CAISSON CUTTING SHOE TEETH DRILLING EQUIPMENT

544
PALLET OF DRILLING TOOLS DRILLING EQUIPMENT

545
(2) BOXES OF CONICAL BOLTS DRILLING EQUIPMENT

546
(2) BOXES OF WELD ON CONICAL BOLT RECEIVERS DRILLING EQUIPMENT

546
BUNDLE OF HARD FACE STEEL PLATE FOR CORE BARRELS

547
CENTRALIZER DRILL ROD W/ 9IN. STEEL TRICONE ROLLER BIT DRILLING EQUIPMENT

548
PERAK 80 7IN. OVERBURDEN SUPER JAW DOWN THE HOLE HAMMER W/ BIT DRILLING EQUIPMENT 11in. Open, 8in. Closed.

549
6IN. DOWN THE HOLE HAMMER W/ 8IN. BIT DRILLING EQUIPMENT

550
PERAK 180 DOWN THE HOLE HAMMER W/ SUPER JAW & OVERBURDEN BIT DRILLING EQUIPMENT 26in. Open, 22in. Closed.

551
UNUSED PERAK 180 DOWN THE HOLE HAMMER W/ SUPER JAW DRILLING EQUIPMENT 20in. Bit.

552
20IN. DOWN THE HOLE HAMMER BIT DRILLING EQUIPMENT

553
12IN. DOWN THE HOLE HAMMER BIT DRILLING EQUIPMENT

554
9IN. DOWN THE HOLE HAMMER BIT DRILLING EQUIPMENT

555
UNUSED OVERBURDEN SUPER JAW BIT DRILLING EQUIPMENT 11in. open, 8in. Closed.

556
(4) REPLACEMENT BITS FOR SUPER JAW DRILLING EQUIPMENT

557
REPLACEMENT BITS FOR 8IN. SUPERJAW BIT DRILLING EQUIPMENT

557
REPLACEMENT BITS FOR 8" SUPERJAW BIT

557
REPLACEMENT BITS FOR 8" SUPERJAW BIT

557
REPLACEMENT BITS FOR 8" SUPERJAW BIT

557
REPLACEMENT BITS FOR 8" SUPERJAW BIT

558
MISC DRILL BITS DRILLING EQUIPMENT

559
(10) 2IN. CARBIDE BUTTON BITS DRILLING EQUIPMENT

560
(10) 2IN. CARBIDE BUTTON BITS DRILLING EQUIPMENT

561
(10) 3IN. CARBIDE BUTTON BITS DRILLING EQUIPMENT

562
(10) 3IN. CARBIDE BUTTON BITS DRILLING EQUIPMENT

563
8IN. CARBIDE TRICONE ROLLER BIT DRILLING EQUIPMENT

564
12IN. CARBIDE TRICONE ROLLER BIT DRILLING EQUIPMENT

565
12IN. CARBIDE TRICONE ROLLER BIT DRILLING EQUIPMENT

566
17IN. CARBIDE TRICONE ROLLER BIT DRILLING EQUIPMENT

567
ASSORTED SIZE SUB-SAVERS DRILLING EQUIPMENT

568
(3) 8IN. CUTTING SHOES DRILLING EQUIPMENT

569
(5) DRILL ROD LIFTING EYES DRILLING EQUIPMENT

570
J-SLOT FLUSHING BELL DRILLING EQUIPMENT

571
FLUSHING BELL DRILLING EQUIPMENT

572
UNUSED FLUSHING BELL DRILLING EQUIPMENT

573
FLUSHING BELL SUPPORT EQUIPMENT

574
FLUSHING BELL SUPPORT EQUIPMENT

575
FLUSHING BELL SUPPORT EQUIPMENT

576
DOWN THE HOLE HAMMER ADAPTOR DRILLING EQUIPMENT

577
(3) PAILS OF THREADED ROD NUTS DRILLING EQUIPMENT

578
PAIL OF CASAGRANDE UNDERCARRIAGE TRACK PINS EQUIPMENT PART

579
LATE ENTRY

580
LATE ENTRY

581
2015 STS SCHELTZKE MPS 510D-C-AUT GROUT MACHINE SN:150515 powered by JCB Tier IV 1 diesel engine, holding tank and mixing tank, remote control, batch counter, weighing device, STS FS26-3000-HYD hydraulic screw conveyor, self contained pressure washer, wit
2015 STS SCHELTZKE MPS 510D-C-AUT GROUT MACHINE SN:150515 powered by JCB Tier IV 1 diesel engine, holding tank and mixing tank, remote control, batch counter, weighing device, STS FS26-3000-HYD hyd...

582
CEMENT SILO CONCRETE EQUIPMENT

583
CHEMGROUT 550 GROUT PUMP CONCRETE/GROUT PUMP skid mounted.

584
QTY OF GROUT DUMP HOSE SUPPORT EQUIPMENT

585
12 YARD SELF CONTAINED TRANSIT MIXER HOOK LIFT ATTACHMENT powered by Deutz diesel engine, mounted on a hooklift body.

586
LATE ENTRY

587
(3) OIL DRAIN PANS DRILLING EQUIPMENT

588
LATE ENTRY

589
LATE ENTRY

590
QTY OF SCAFFOLDING & FITTINGS SUPPORT EQUIPMENT

591
SKID MOUNTED WASTE OIL TANK FUEL TANK

592
PALLET OF HD CABLE ROLLS SUPPORT EQUIPMENT

593
QTY OF SCAFFOLDING SUPPORT EQUIPMENT

594
QTY OF CATCH BASIN RINGS SUPPORT EQUIPMENT

595
(2) RACKS OF ACCRO JACKS & (2) EMPTY RACKS SUPPORT EQUIPMENT

596
APPROX (7) 8FT. X 8FT. RUBBER BLASTING MATS SUPPORT EQUIPMENT

597
APPROX (17) WIRE ROPE BLASTING MATS SUPPORT EQUIPMENT

598
GRACE 500 GALLON PLASTIC TANK SUPPORT EQUIPMENT

599
15IN. X 6IN. X 28FT. STEEL I-BEAM STEEL BEAM

600
LARGE QTY OF STEEL CAISSION PIPES STEEL PIPE 16'x24"x.75", 15x13 3/8"x.5", 45'x22"x3/8", 20'x13 3/8" rope thread, (4) 45'x8 5/8"x.5", (18) 45'x12.75"x.25", 25'x17 3/4"x3/8", 25'x10.75"x.5", (6) 45'x16.25", 20'x12.75"x.25", 20'x8 5/8"x3/8", 20'x16"x.5", 35
LARGE QTY OF STEEL CAISSION PIPES STEEL PIPE 16'x24"x.75", 15x13 3/8"x.5", 45'x22"x3/8", 20'x13 3/8" rope thread, (4) 45'x8 5/8"x.5", (18) 45'x12.75"x.25", 25'x17 3/4"x3/8", 25'x10.75"x.5", (6) 45'...

601
2000 KG CAPACITY LIFTING MAGNET

602
20FT. CONEX BOX CONTAINER

603
LATE ENTRY

604
QTY OF LIGHTING SUPPLIES SUPPORT EQUIPMENT

605
TRUCK BODY TRUCK PARTS & ACCESSORIES

606
DIAMOND REO FUEL TRUCK FUEL/LUBE TRUCK VIN:575157

606
10 3/4 X 20FT. J-SLOT DRILL PIPE DRILLING EQUIPMENT

606
10 3/4 X 20FT. J-SLOT DRILL PIPE DRILLING EQUIPMENT

606
10 3/4 X 20FT. J-SLOT DRILL PIPE DRILLING EQUIPMENT

607
(2) SETS OF STEEL STAIRS W/ RAILINGS SUPPORT EQUIPMENT

608
LATE ENTRY

609
21.5IN. X 12IN. X 30FT. LOAD TEST I-BEAM STEEL BEAM

610
21.5IN. X 12IN. X 40FT. LOAD TEST I-BEAM STEEL BEAM

611
21.5IN. X 12IN. X 40FT. LOAD TEST I-BEAM STEEL BEAM

612
QTY OF SCAFFOLDING SUPPORT EQUIPMENT

613
LATE ENTRY

614
45FT. FLATBED FLATBED TRAILER VN:N/A equipped 45ft. Fkatbed body with concrete forming hardware: super studs, screw jacks, spring suspension, 11R24.5 tires, tandem axle.

615
UNUSED HOLLAND AIR SLIDE 5TH WHEEL TRUCK PARTS & ACCESSORIES

616
QTY OF ASSORTED SIZE STEEL REBAR STEEL BEAM

617
STACK OF 4 X 4 FORMING TIMBERS SUPPORT EQUIPMENT

618
QTY OF BARRICADES & BARRELS, STEP LADDER SUPPORT EQUIPMENT

619
(4) SETS OF SCAFFOLDING STAIRS SUPPORT EQUIPMENT

620
(2) MISC STEEL BEAMS STEEL BEAM

621
12IN. X 12IN. X 31FT. STEEL BEAM STEEL BEAM

622
12IN. X 12IN. X 31FT. STEEL BEAM STEEL BEAM

623
12IN. X 12IN. X 31FT. STEEL BEAM STEEL BEAM

624
12IN. X 12IN. X 31FT. STEEL BEAM STEEL BEAM

625
12IN. X 12IN. X 31FT. STEEL BEAM STEEL BEAM

626
12IN. X 12IN. X 31FT. STEEL BEAM STEEL BEAM

627
(4) STEEL BOX RUBING 8IN. X 8IN. SUPPORT EQUIPMENT

628
WERNER ALUMINUM EXTENSION LADDER SUPPORT EQUIPMENT

629
LATE ENTRY

630
(15) 15IN. X 14IN. I-BEAMS ASSORTED LENGTH STEEL BEAM

631
QTY OF CHANNEL SUPPORT BEAMS SUPPORT EQUIPMENT

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Sponsored Links

Brooklyn, NY

Alex Lyon and Son Auctioneers, Inc.

Alex Lyon and Son Auctioneers, Inc.


Contact:
Phone:
Sale Location
266 Seigel St, Brooklyn
Brooklyn, NY 11206
Sale Dates and Times
Wednesday Jul 24, 2019 Completed
Friday Jul 26, 2019 Completed
Sale Terms and Conditions
ALEX LYON & SON SALES MANAGERS & AUCTIONEERS, INC.

PO BOX 610 RD #2 BRIDGEPORT, NY 13030

PHONE: 315-633-2944  FAX: 315-633-8010



***NOTE***

IF YOU HAVE A COMPANY NAME THAT WILL NEED TO BE REGISTERED WITH OUR ONLINE BIDDING SYSTEM FOR VEHICLE TITLE INFORMATION, PLEASE DO SO BY GOING TO THE AUCTION HOME PAGE AND FIND THE "CLICK TO REGISTER" LINK, OR LOGIN TO YOUR ACCOUNT AND MAKE SURE YOUR INFORMATION IS UPDATED

A $10,000 Wire Transfer Deposit is needed for approval.   If you are a successful bidder the wire transfer deposit will be applied to your invoice. If your purchase is less than total deposit, your deposit will be applied to your invoice and you will be refunded the remainder of the total deposit. If you are non successful, your deposit is 100% refundable.  Please contact the Lyon office to begin the refund of your deposit. 

WIRE TRANSFER INSTRUCTIONS

“IMPORTANT”

 

You must include your buyer number and sale date as a reference in your wire transfer to ensure proper credit.  Failure to do so may result in a delay in the release  of your equipment, with subsequent storage charges.  Be specific with your bank as to the importance of this reference number! 

 

***Note: ONLINE BIDDING - please reference your online bidder #.  Also reference the name you have registered under. 

YOUR BUYER # IS_____________________________ 

 

AUCTION DATE IS ____________________________

  

TO BANK:                                       KEY BANK 

                                                      115 GENESEE ST. 

                                                      AUBURN, NY 13021

 

  ACCOUNT NAME:                          ALEX LYON & SON 

                                                      RD #2 BOX 610

                                                      7697 STATE ROUTE 31 

                                                      BRIDGEPORT, NY 13030

ACCOUNT NUMBER                       7900204004

  

ROUTING/ABA NUMBER                021300077

 

SWIFT CODE(INTERNATIONAL)   KEYBUS33

 

OUR SALES TAX ID                       16-1209422

Purchases must be removed from the sale site within 7 days of the sale date.  Loading will be on Monday through Saturday from 8:00 AM to 5:00 PM, and if applicable, Sundays from 8:00 AM to 11:00 AM.  Any equipment remaining on the grounds after 7 days will be subject to storage fees or removed at the buyers expense.  Shipping arrangements and cost are the BUYERS SOLE RESPONSIBILITY.

Purchases become the responsibility of and shall be and remain at the risk of the Purchaser immediately upon acceptance of his bid.  It shall be the responsibility of the Purchaser to insure his purchases immediately.

NOTICE – Policy for international Buyers: all international buyers must provide a current, valid passport for identification purposes and a $10,000.00 deposit. The deposit must be made with US funds in form of cashier’s check or wire transfer.

SALES TAX: All sales are subject to sales tax.

SALES TAX EXEMPTIONS: Buyers with a VALID exemption certificate are not required to pay sales tax for equipment and miscellaneous, but MUST present a copy of their certificate at time of registration at EACH SALE.

EXPORTERS:  If you take possession of your purchase in the United States, you must pay sales tax. You must provide the following in order not to be charged:

Bill of Lading – All export purchases must be removed by a trucking company. The trucking company will provide a Bill of Lading with the purchases listed.

NOTE: No items will be released without this document or you may pay tax and be reimbursed once the Bill of Lading or a Dock Receipt is received.

MOTOR VEHICLES AND TRAILER EXEMPTIONS: Specific for each state. Please call office for exemption details.

No sale shall be invalidated by reason of any defect or inaccuracy in any of the lots by reason of their being incorrectly described in this listing or elsewhere and no liability shall be borne by the Auctioneers in respect of any such fault or errors.  These listings have been prepared only as a guide based on information from sources generally believed to be reliable and from the Consignor but the accuracy thereof cannot be guaranteed or warranted by the Auctioneers.  Bidder acknowledges that it is the responsibility to inspect all equipment and to make his own inquires.

There shall be no guarantees or warranties, expressed or implied statutory or otherwise of any nature whatsoever.  Each and every lot will be sold “as is” “where is”.  Specifically, but not to restrict the generality of the foregoing, the Auctioneers make no representation or warranty on any of the lots which are the subject of the auction.

Since the property sold is second-hand property, seller makes no warranty of any kind and sells the goods on an “as-is” basis, further, seller makes no warranty of any kind whatever, expressed or implied: and all implied warranties of merchantability and fitness for a particular purpose are hereby disclaimed to the seller. 

All necessary documents will be mailed within 7 days of the payment. Availability of these documents is subject to provision of the same by the Consignor.

Every person at the Auction site before, during and after the auction sale shall be deemed to be there at his own risk with notice of the condition of the premises, the activities on the premises, and the conduct of the third parties and the Bidder shall advise his agents and employees.

THIS LISTING IS ONLY A GUIDE AND MAY NOT BE ACCURATE IN ANY WAY.  EVERY ITEM WILL SELL “AS IS” “WHERE IS”.  PLEASE INSPECT THE EQUIPMENT PRIOR TO BIDDING.  ALL SALES ARE FINAL.

Tax exempt entities must have their exemption number and state form at the time of the sale or they will be charged sales tax.

Checks will be accepted up to $1000.  "Cash or Company Check" accompanied by current “Bank Letter of Guarantee”, made payable to Alex Lyon & Son. Everything Sells “AS IS, “WHERE IS.” The following charges will apply on all purchases: 

Checks will be accepted up to $1000.  "Cash or Company Check" accompanied by current “Bank Letter of Guarantee”, made payable to Alex Lyon & Son. Everything Sells “AS IS, “WHERE IS.” The following charges will apply on all purchases: (1.) For each unit $30,001.00 and above, a 5.95% administration fee will be assessed when paying with cash or good check. (The standard fee of 8.95% will be assessed when paying with credit card); and (2.) For each unit $1,001- $30,000, a 10% administration fee will be assessed when paying with cash or good check, and a 13% fee will be assessed when paying with credit card. (3.) For each unit $0- $1,000, a 12.5% administration fee will be assessed when paying with cash or good check, and a 15.5% fee will be assessed when paying with credit card.  (4.) An additional 2.5% internet buyers fee will be charged to successful online bidders with a $700 per item cap. Payment requirements subject to change for onsite bidders.  Please contact the auction house for additional information on payment instructions.

 

 (4.) An additional 2.5% internet buyers fee will be charged to successful online bidders with a $700 per item cap. Payment requirements subject to change for onsite bidders.  Please contact the auction house for additional information on payment instructions.

***NOTE** As of February 1, 2018, successful online bidders will now pay an additional 2.5% internet buyers fee with a $700 per item cap. 

All property is sold “AS IS”, WHERE IS" and ALL SALES ARE FINAL. Property is open to thorough public inspection. It is the Bidder’s responsibility to determine condition, age, genuineness, value or any other determinative factor. Alex Lyon & Son may attempt to describe the merchandise in advertising, on the Internet and at the auction but makes no representations. In no event shall Alex Lyon & Son be held responsible for having made or implied any warranty of merchantability or fitness for a particular purpose. Bidder shall be the sole judge of value.

Bidders who bid from off site and are not present at the live auction or preview understand and acknowledge that they may not be able to inspect an item as well as if they examined it in person. It is the Bidder’s responsibility to determine condition, age, genuineness, value or any other determinative factor. Alex Lyon & Son shall endeavor to describe in detail each item and any pertinent information about it.  Alex Lyon & Son will not be responsible for any errors or omissions in the description of the merchandise unless it is a material and intentional misrepresentation of the item itself. Bidder agrees that everything is sold as is and that they may not return any item they purchase.

Please be aware that in addition to the description of each lot being a guide in regards to the condition of the lot, this also applies to the terms in which that lot is sold. It is the buyer's responsibility to listen to the audio or view the chats to know the terms of the purchase. i.e. an individual lot can be sold times the money per piece, per group within the lot, choiced with other lots times the money per piece within each lot, or in any other way the auctioneer announces a lot is to be sold. This will be announced over the audio as well as sent via chat. There is no guarantee this will be noted in the description of a lot, and may not be announced until just prior to a lot being sold. Functionality of the audio or the chat box cannot be guaranteed. A winning internet buyer is still responsible for purchasing a lot or lots in the way in which it or they are sold, regardless of whether or not it is denoted in the description, or if the audio or chat window are fuctioning properly.

Please note that each bid made is legally binding until the lot has been "Sold" online. i.e. the person running the software has hit the "Sold" button and "Sold" is displayed online. This includes if the auctioneer as accepted bid(s) higher than the highest internet bid. The auctioneer reserves the right to revert to the last highest inernet bid, so long as the lot is still open and the bid is still available to "sell" to. This includes if the auctioneer has said "sold" on site. Again, an internet bid is legally binding until the lot is "sold" online, regardless if the auctioneer has attained bids higher than the current highest internet bid or has said "sold" onsite.

Alex Lyon & Son is providing Internet pre-auction and live bidding as a service to Bidder. Bidder acknowledges and understands that this service may or may not function correctly the day of the auction. Under no circumstances shall Bidder have any kind of claim against Alex Lyon & Son or anyone else if the Internet service fails to work correctly before or during the live auction. Alex Lyon & Son will not be responsible for any missed bids from any source. Internet bidders who desire to make certain their bid is acknowledged should use the proxy-bidding feature and leave their maximum bid 24 hours before the auction begins. Alex Lyon & Son reserves the right to withdraw or re-catalog items in this auction.

Purchases must be removed from the sale site within 7 days of the sale date. Loading will be on Monday through Saturday from 8:00 AM to 4:30 PM, and if applicable, Sundays from 8:00 AM to 10:30 AM. These pickup times can change at any time. Any equipment remaining on the grounds after 7 days will be subject to storage fees or removed at the buyers expense. Shipping arrangements and cost are the BUYERS SOLE RESPONSIBILITY

**Notice Regarding Like Kind Exchange

Equipment consigned to this auction may be sold as part of an equipment exchange, pursuant to Section 1031 of the Internal Revenue Code, and the rights of the consignor under the Contract to Auction may be assigned to a third-party Qualified Intermediary

This notice appears as matter of record only.**


Listing Details

101
HAND TRUCK SUPPORT EQUIPMENT

102
HAND TRUCK SUPPORT EQUIPMENT

103
HAND TRUCK SUPPORT EQUIPMENT

104
HAND TRUCK SUPPORT EQUIPMENT

105
CHAPIN BROACAST SPREADER SUPPORT EQUIPMENT

106
2600PSI PRESSURE WASHER SUPPORT EQUIPMENT

107
(2) STEEL BULLARDS SUPPORT EQUIPMENT

108
RED CROWN GAS FUEL PUMP SUPPORT EQUIPMENT

109
PURE OIL CO. FUEL PUMP SUPPORT EQUIPMENT

110
MUSTANG MRD5085 REVERSIBLE PLATE COMPACTGOR SUPPORT EQUIPMENT

111
MUSTANG LF88 PLATE COMPACTOR SUPPORT EQUIPMENT

112
MUSTANG LF88 PLATE COMPACTOR SUPPORT EQUIPMENT

113
AMMANN AVP1240 PLATE COMPACTOR SUPPORT EQUIPMENT

114
WACKER BS700 JUMPING JACK SUPPORT EQUIPMENT

115
TITAN HD INDUSTRIAL AIR COMPRESSOR SUPPORT EQUIPMENT

116
LATE ENTRY

117
STOW 2 BAGGER MORTAR & PLASTER MIXER SUPPORT EQUIPMENT

118
STONE MORTAR & PLASTER MIXER SUPPORT EQUIPMENT BILL OF SALE

119
STONE MORTAR & PLASTER MIXER SUPPORT EQUIPMENT BILL OF SALE

120
(2) STEEL BULLARS SUPPORT EQUIPMENT

121
INGERSOLL RAND AIR WINCH SUPPORT EQUIPMENT

122
SHOP CART

123
SHOP CART SUPPORT EQUIPMENT

124
SHOP CART SUPPORT EQUIPMENT

125
OMNI QUIP 250 CONCRETE BUGGY CONCRETE EQUIPMENT

126
OMNI QUIP WORK PRO 155 CONCRETE BUGGY CONCRETE EQUIPMENT

127
OMNI QUIP WORK PRO 155 CONCRETE BUGGY CONCRETE EQUIPMENT

128
TEMPO GAS CADDY SUPPORT EQUIPMENT

129
AIR LUBRICATION TANK SUPPORT EQUIPMENT

130
BARREL HAND TRUCK SUPPORT EQUIPMENT

131
SWELLEX TEST KIT SUPPORT EQUIPMENT

131
17.5IN. X 22IN. X 5IN. @ 7FT. 4IN., 7FT. 11IN., 15FT. 2IN. (3-TOTAL) STEEL I-BEAMS DRILLING EQUIPMENT

132
WHITEMAN POWER TROWEL SUPPORT EQUIPMENT

133
BARTELL-MORRISON B436 POWER TROWEL SUPPORT EQUIPMENT

134
POWER TROWEL

135
TROWEL BLADES

136
FORK EXTENSIONS ARE 84"

137
BARREL HAND TOOLS

138
BARREL HAND TRUCK

139
LATE ENTRY

140
LATE ENTRY

141
TORCH TANK

142
MILLER BIG BLUE 350 PIPE PRO HRS:286

142
PALLET OF WELDING RODS AND WIRE

143
MILLER MATIC 250 WELDER

144
BURCO MOSA WELDER

145
LINCOLN ELECTRIC AC225 ARC WELDER WELDER

146
VAL 6 INRNA RED OIL HEATER

147
VAL 6 KBE5L RED DIESEL HEATER

148
DAYTON 401C BTU OIL HEATER

148
UNIVERSAL 75-125,000 BTU HEASTER SUPPORT EQUIPMENT

149
R+D PARTS WASHER

150
CENTRAL PNEUMATIC 40LB FLOOR BLAST CABINET SUPPORT EQUIPMENT

151
LATE ENTRY

152
REGENT LIGHT STAND SUPPORT EQUIPMENT

153
CRAFTSMAN LIGHT STAND SUPPORT EQUIPMENT

154
CRAFTSMAN LIGHT STAND SUPPORT EQUIPMENT

155
LATE ENTRY

156
JET J-5550 SHOP DRILL PRESS SUPPORT EQUIPMENT

157
RIDGID 10IN. TABLE SAW W/ PORTABLE STAND SUPPORT EQUIPMENT

158
BOSCH 3PC BATTERY POWERED KIT W/ FLASH LIGHT, DRILL, SAW SUPPORT EQUIPMENT

159
HILTI TE55 HAMMER DRILL SUPPORT EQUIPMENT

160
HILTI TE56 HAMMER DRILL SUPPORT EQUIPMENT

161
MILWAUKEE HD HAMMER DRILL SUPPORT EQUIPMENT

162
BOSCH 11316 DEMO HAMMER SUPPORT EQUIPMENT

163
BOSCH 11316 DEMO HAMMER SUPPORT EQUIPMENT

164
APPROX (14) DRILL BITS SUPPORT EQUIPMENT

165
BOSCH 11224 VSR DRILL SUPPORT EQUIPMENT

166
MAKITA HR2811H HAMMER DRILL SUPPORT EQUIPMENT

167
MAKITA HR2811H HAMMER DRILL SUPPORT EQUIPMENT

168
HILTI UH650 ELECTRIC DRILL SUPPORT EQUIPMENT

169
RYOBI ELECTRIC DRILL SUPPORT EQUIPMENT

170
BOSCH ELECTRIC WRENCH SUPPORT EQUIPMENT

171
BOSCH 1752G RIGHT ANGLE GRINDER SUPPORT EQUIPMENT

172
MAKITA 9227C POLISHER SUPPORT EQUIPMENT

173
HILTI DXE72 POWDER ACUATED NAIL GUN SUPPORT EQUIPMENT

174
HILTI DX36 POWER ACUATED NAIL GUN SUPPORT EQUIPMENT

175
POWER FASTNER P7201 POWDER ACUATED NAIL GUN SUPPORT EQUIPMENT

176
RAMSET SA270 POWDER ACUATED NAIL GUN SUPPORT EQUIPMENT

177
MILWAUKEE ORBITAL SUPER SAWSALL SUPPORT EQUIPMENT

178
CHICAGO ELECTRIC DRILL SUPPORT EQUIPMENT

179
MILWAUKEE SAWSALL SUPPORT EQUIPMENT

180
MILWAUKEE ORBITAL SAWSALL SUPPORT EQUIPMENT

181
7 1/4IN. HD CIRCULAR SAW SUPPORT EQUIPMENT

182
SKILSAW 8 1/4IN. CIRCULAR SAW SUPPORT EQUIPMENT

183
PORTER CABLE ELECT. CIRCULAR SAW SUPPORT EQUIPMENT

184
SKILSAW 8IN. ELECT. CIRCULAR SAW SUPPORT EQUIPMENT

185
MILWAUKEE 7 1/4IN. ELECT. CIRCULAR SAW SUPPORT EQUIPMENT

186
MILWAUKEE 14IN. ABRASIVE CUT-OFF SAW SUPPORT EQUIPMENT

187
DEWALT D28715 ELECT CHOP SAW SUPPORT EQUIPMENT

188
DEWALT DW718 12IN. DOUBLE BEVEL SLIDING COMPOUND MITER SAW SUPPORT EQUIPMENT

189
ROCKWELL RK9000 JAW HORSE SUPPORT EQUIPMENT

190
LATE ENTRY

191
SCHUMACHER BATTERY CHARGER SUPPORT EQUIPMENT

192
NAPA BATTERY CHARGER SUPPORT EQUIPMENT

193
SOLAR BATTERY CHARGER SUPPORT EQUIPMENT

194
JNC 1224 JUMP PACK SUPPORT EQUIPMENT

195
DSR PRO SERIES JUMP PACK SUPPORT EQUIPMENT

196
LATE ENTRY

197
DRAFTING TABLE SUPPORT EQUIPMENT

198
HILTI PR60 ROTARY LASER W/ TRIPOD SUPPORT EQUIPMENT

199
800HV ROTARY LASER SUPPORT EQUIPMENT

200
HILTI PR16 ROTARY LASER SUPPORT EQUIPMENT

201
HILTI PR2-HS ROTARY LASER SUPPORT EQUIPMENT

201
(2) GRADE RODS SUPPORT EQUIPMENT

201
LEKA TCR403 REFLECTORLESS TOTAL STATION SUPPORT EQUIPMENT

202
(2) BOTTLE JACKS SUPPORT EQUIPMENT

203
SUMP PUMP SUPPORT EQUIPMENT

204
EVERBILT SUMP PUMP SUPPORT EQUIPMENT

205
MULTIQUIP SUMP PUMP SUPPORT EQUIPMENT

206
MUSTANG MP4800 SUMP PUMP SUPPORT EQUIPMENT

207
MUSTANG MP4800 SUMP PUMP SUPPORT EQUIPMENT

208
MUSTANG MP4800 SUMP PUMP SUPPORT EQUIPMENT

209
2IN. SUMP PUMP SUPPORT EQUIPMENT

210
WACKER PT3 TRASH PUMP SUPPORT EQUIPMENT

211
TITAN HD 3IN. TRASH PUMP SUPPORT EQUIPMENT

212
HONDA EU1000 GENERATOR SUPPORT EQUIPMENT

213
HONDA EB2500 GENERATOR SUPPORT EQUIPMENT

214
RIDGID FM12180 GENERATOR SUPPORT EQUIPMENT

215
TITAN 8000 HIGH PERFORMANCE GENERATOR SUPPORT EQUIPMENT

216
BRIGGS & STRATTON 5550 WATT GENERATOR SUPPORT EQUIPMENT

217
HOMELIT LB5550 GENERATOR SUPPORT EQUIPMENT

218
8IN. & 6IN. PIPE TESTING PLUGS SUPPORT EQUIPMENT

219
MAKITA ELECT JACK HAMMER W/ HAMMER CART SUPPORT EQUIPMENT

220
DARDA C-12 HYDRAULIUC ROCK SPLITTER SUPPORT EQUIPMENT

221
DARDA C-12 HYDRAULIUC ROCK SPLITTER SUPPORT EQUIPMENT

222
DARDA C-12 HYDRAULIUC ROCK SPLITTER SUPPORT EQUIPMENT

223
DARDA C-12 HYDRAULIUC ROCK SPLITTER SUPPORT EQUIPMENT

224
DARDA C-12 HYDRAULIUC ROCK SPLITTER SUPPORT EQUIPMENT

225
DARDA C-12 HYDRAULIUC ROCK SPLITTER SUPPORT EQUIPMENT

226
HYDRAULIC POWER PACK SUPPORT EQUIPMENT

227
HYDRAULIC POWER PACK SUPPORT EQUIPMENT

228
HYDRAULIC POWER PACK SUPPORT EQUIPMENT

229
HYDRAULIC POWER PACK SUPPORT EQUIPMENT

230
HYDRAULIC POWER PACK SUPPORT EQUIPMENT

231
HYDRAULIC POWER PACK SUPPORT EQUIPMENT

232
REPLACEMENT FEATHERS & WEDGE SUPPORT EQUIPMENT

233
REPLACEMENT FEATHERS & WEDGE SUPPORT EQUIPMENT

234
REPLACEMENT FEATHERS & WEDGE SUPPORT EQUIPMENT

235
REPLACEMENT WEDGES SUPPORT EQUIPMENT

236
SPARE DARDA C-12 HANDLES SUPPORT EQUIPMENT

237
SHOP CART FULL OF NEW GLOVES SUPPORT EQUIPMENT

238
LARGE BOX OF NEW GLOVES SUPPORT EQUIPMENT

239
LARGE BOX OF NEW GLOVES SUPPORT EQUIPMENT

240
LARGE BOX OF NEW GLOVES SUPPORT EQUIPMENT

241
LARGE BOX OF NEW GLOVES SUPPORT EQUIPMENT

242
LARGE BOX OF NEW GLOVES SUPPORT EQUIPMENT

243
(2) ALUMINUM WHEELS SUPPORT EQUIPMENT

244
(2) ALUMINUM WHEELS SUPPORT EQUIPMENT

245
(2) P215/50R17 TIRES ON ALLOY WHEELS SUPPORT EQUIPMENT

246
LATE ENTRY

247
LATE ENTRY

248
LATE ENTRY

249
TOOL BOX SUPPORT EQUIPMENT

250
WALKBEHIND ROLLER SUPPORT EQUIPMENT

251
APPROX 20 ROLLS OF PUMP DISCHARGE HOSE & HOSE COUPLERS SUPPORT EQUIPMENT

252
GRIPHOIST T-20 SUPPORT EQUIPMENT

253
GRIPHOIST T-20 SUPPORT EQUIPMENT

254
GRIPHOIST T-20 SUPPORT EQUIPMENT

255
BATTERY POWERED CONCRETE VIBRATOR SUPPORT EQUIPMENT

256
STOW CONCRETE VIBRATOR SUPPORT EQUIPMENT

257
CONCRETE VIBRATOR SUPPORT EQUIPMENT

258
CONCRETE VIBRATOR SUPPORT EQUIPMENT

259
CONCRETE VIBRATOR SUPPORT EQUIPMENT

260
WACKER CONCRETE VIBRATOR SUPPORT EQUIPMENT

261
CONCRETE VIBRATOR SUPPORT EQUIPMENT

262
CONCRETE VIBRATOR SUPPORT EQUIPMENT

263
CONCRETE VIBRATOR SUPPORT EQUIPMENT

264
BACKPACK CONCRETE VIBRATOR SUPPORT EQUIPMENT

265
RIDGID 60IN. PIPE WRENCH SUPPORT EQUIPMENT

266
(2) RIDGID 48IN. PIPE WRENCHES SUPPORT EQUIPMENT

267
(4) ASSORTED PIPE WRENCHES SUPPORT EQUIPMENT

268
(6) ROLLS OF AIR HOSE SUPPORT EQUIPMENT

269
(3) ROLLS OF GROUT HOSE SUPPORT EQUIPMENT

270
QTY OF SLEDGE HAMMER HEADS, PICK HEADS, HANDLES SUPPORT EQUIPMENT

270
HUSKY 150PSI PORTABLE ELECTRIC AIR COMPRESSOR SUPPORT EQUIPMENT

271
80LB JACK HAMMER SUPPORT EQUIPMENT

272
80LB JACK HAMMER SUPPORT EQUIPMENT

273
80LB JACK HAMMER SUPPORT EQUIPMENT

274
APT JACK HAMMER SUPPORT EQUIPMENT

275
80LB JACK HAMMER SUPPORT EQUIPMENT

276
80LB JACK HAMMER SUPPORT EQUIPMENT

277
SULLAIR JACK HAMMER SUPPORT EQUIPMENT

278
SULLAIR JACK HAMMER SUPPORT EQUIPMENT

279
SULLAIR JACK HAMMER SUPPORT EQUIPMENT

280
APT RIVET BUSTER SUPPORT EQUIPMENT

281
APT RIVET BUSTER SUPPORT EQUIPMENT

282
APT RIVET BUSTER SUPPORT EQUIPMENT

283
APT RIVET BUSTER SUPPORT EQUIPMENT

284
APT RIVET BUSTER SUPPORT EQUIPMENT

285
APT RIVET BUSTER SUPPORT EQUIPMENT

286
APT RIVET BUSTER SUPPORT EQUIPMENT

287
SULLAIR RIVET BUSTER SUPPORT EQUIPMENT

287
LATE ENTRY

288
RIVET BUSTER SUPPORT EQUIPMENT

289
RIVET BUSTER SUPPORT EQUIPMENT

290
RIVET BUSTER SUPPORT EQUIPMENT

291
SULLAIR RIVET BUSTER SUPPORT EQUIPMENT

292
CHIPPING HAMMER SUPPORT EQUIPMENT

293
APT RIVET BUSTER SUPPORT EQUIPMENT

294
CHIPPING HAMMER SUPPORT EQUIPMENT

295
ROCK DRILL SUPPORT EQUIPMENT

296
ROCK DRILL SUPPORT EQUIPMENT

297
ROCK DRILL SUPPORT EQUIPMENT

298
QTY OF AIR & WATER VALVES SUPPORT EQUIPMENT

299
QTY OF JACK HAMMER POINTS & CHISELS SUPPORT EQUIPMENT

300
QTY OF CLAY SPADE BITS SUPPORT EQUIPMENT

301
QTY OF DRILL STEEL SUPPORT EQUIPMENT

302
BIN OF RIVET BUSTER POINTS SUPPORT EQUIPMENT

303
MISC TOOLS SUPPORT EQUIPMENT

304
MISC LIFTING HOOKS SUPPORT EQUIPMENT

305
(5) PICKS SUPPORT EQUIPMENT

306
(14) SMALL SLEDGE HAMMERS SUPPORT EQUIPMENT

307
(9) LARGE SLEDGE HAMMERS SUPPORT EQUIPMENT

308
QTY OF NAIL PULLER BARS & PRY BARS SUPPORT EQUIPMENT

309
(2) MANUAL ROLLERS SUPPORT EQUIPMENT

310
BOX OF FLASHING LIGHTS SUPPORT EQUIPMENT

311
QTY OF ASSORTED BUCKET TEETH SUPPORT EQUIPMENT

312
PALLET OF MISC PINS SUPPORT EQUIPMENT

313
ALLEN ENGINEERING VIBRATING SCREED SUPPORT EQUIPMENT

314
VIBRASTRIKE VIBRATING SCREED SUPPORT EQUIPMENT

315
VIBRASTIKE 5FT & 16FT. REPLACEMENT SCREEDS SUPPORT EQUIPMENT

316
(2) CRATES OF CEMENT FINISHING TOOLS SUPPORT EQUIPMENT

317
CRATE OF NEW CONCRETE ANCHOR STRAPS SUPPORT EQUIPMENT

318
LATE ENTRY

319
RIDE ON CONCRETE POWER TROWEL SUPPORT EQUIPMENT

320
RIDE ON CONCRETE POWER TROWEL SUPPORT EQUIPMENT

320
POWER TROWELL TRANSPORT WHEELS AND HANDLE

321
REPLACEMENT POWER TROWEL BLADES SUPPORT EQUIPMENT

321
LATE ENTRY

322
FILL-RITE ELECT. FUEL PUMP W/ NOZZLE SUPPORT EQUIPMENT

323
FILL-RITE ELECT. FUEL PUMP W/ NOZZLE SUPPORT EQUIPMENT

324
FILL-RITE ELECT. FUEL PUMP W/ NOZZLE SUPPORT EQUIPMENT

325
MARATHON FUEL PUMP SUPPORT EQUIPMENT

326
(4) PIPE STANDS SUPPORT EQUIPMENT

327
(4) 2IN. AIR HOSE SUPPORT EQUIPMENT

328
(4) 2IN. AIR HOSE SUPPORT EQUIPMENT

329
(3) 2IN. AIR HOSES & MISC HOSE SUPPORT EQUIPMENT

330
PAIL OF AIR HOSE COUPLERS SUPPORT EQUIPMENT

331
CRATE OF 1/2IN. D-RINGS SUPPORT EQUIPMENT

332
RACK & CONTENTS, FUEL CANS, HOSE, MISC SUPPORT EQUIPMENT

333
(2) HARRINGTON 3 TON HOISTS, LIFTING CHAINS, CABLES, & MISC SUPPORT EQUIPMENT

334
PALLET OF PUMP SUCTION HOSE SUPPORT EQUIPMENT

335
BICYCLE TAXI SUPPORT EQUIPMENT

336
JOHN DEERE 3 SPEED BICYCLE SUPPORT EQUIPMENT

337
LATE ENTRY

338
GENIE RL4 LIGHT PLANT SN:6437 powered by Kubota diesel engine, equipped with 4-1,000 watt lightbulbs, trailer mounted, 5 hours. BILL OF SALE

339
GENIE RL4 LIGHT PLANT SN:6438 powered by Kubota diesel engine, equipped with 4-1,000 watt lightbulbs, trailer mounted, 5 hours. BILL OF SALE

340
CONTENTS OF (2) LOWER RACKS, GRADE RODS, 6FT-10FT. DRILL STEEL, TOOL BOX ON GROUND SUPPORT EQUIPMENT

341
ALLMAND LIGHT PLANT SN:1134PR003 powered by Kubota diesel engine, equipped with 4-1,000 watt lightbulbs, 6KW, trailer mounted, 1,909 hours. BILL OF SALE

342
METAL BENDER SUPPORT EQUIPMENT

343
MULTIQUIP MB-25HD REBAR BENDER SUPPORT EQUIPMENT

344
MULTIQUIP MB-25HD REBAR BENDER SUPPORT EQUIPMENT

345
MANUAL REBAR BENDER SUPPORT EQUIPMENT

345
MULTIQUIP HBC-25N ELECTRO-HYDRAULIC REBAR CUTTER SUPPORT EQUIPMENT

346
HOTSY 4000PSI PRESSURE WASHER SUPPORT EQUIPMENT

347
EMILIANA SERBATOR FUEL TANK W/ PUMP & CONTAINMENT FUEL TANK

348
EMILIANA SERBATOR FUEL TANK W/ PUMP & CONTAINMENT FUEL TANK

349
PALLET OF MISC LIFTING STRAPS SUPPORT EQUIPMENT

350
INGERSOLL RAND G25 GENERATOR SN:387115 powered by Ingersoll Rand diesel engine, equipped with 25KW, trailer mounted. BILL OF SALE

351
INGERSOLL RAND POWERSOURCE G10 AIR COMPRESSOR SN:373894 powered by Ingersoll Rand diesel engine, equipped with 10KW, 1,046 hours. BILL OF SALE

352
2009 DOOSAN G25E-5 FORKLIFT SN:MF-00653 powered by LP engine, equipped with OROPS, 5,000lb lift capacity, 3-stage mast, Cam sytem hydraulic side shift, 48in. Forks.

352
TOYOTA FGC15 FORKLIFT SN:1195 powered by LP engine, equipped with OROPS, 2-stage mast, 42in. Forks, 2,076 hours.

353
HYSTER 30 FORKLIFT SN:C001B04958G electric powered, equipped with OROPS, 3,000lb lift capacity, 2-stage mast, 60in. Forks.

353
FORKLIFT PROPANE TANK

353
FORKLIFT PROPANE TANK

353
FORKLIFT PROPANE TANK

354
LIFTING HOOKS, LIFTING EYES ON GROUND SUPPORT EQUIPMENT

355
PALLET OF FILTER FABRIC SUPPORT EQUIPMENT

356
QTY OF 4IN. X 4IN. CONCRETE FORMING, TIMBERS UP ON RACKS CONCRETE EQUIPMENT

357
FIRST (2) LIFTS OF ADVANCE LATCHING CONCRETE FORMS: 2FT X 8FT PANELS & MISC CONCRETE EQUIPMENT

358
SECOND (2) LIFTS OF ADVANCE LATCHING CONCRETE FORMS: 8FT. 2FT. & 8FT. X 1FT. CONCRETE EQUIPMENT

359
THIRD (2) LIFTS OF ADVANCE LATCHING CONCRETE FORMS: 8FT. 2FT. & MISC FORMS CONCRETE EQUIPMENT

360
FOURTH (2) LIFTS OF ADVANCE LATHCING FORMS: 8FT. 2FT. & MISC FORMS CONCRETE EQUIPMENT

361
QTY OF FORM HARDWARE ON THE GROUND IN PAILS & STACKED UP & ON RACKS CONCRETE EQUIPMENT

362
INGERSOLL RAND 7/26E AIR COMPRESSOR SN:5Y106295 powered by Ingersoll Rand diesel engine, trailer mounted. BILL OF SALE

363
AIRMAN PDS185S AIR COMPRESSOR SN:B46B41554 powered by Nissan diesel engine, equipped with 185CFM, trailer mounted. BILL OF SALE

364
SULLAIR 250 AIR COMPRESSOR SN:N/A powered by John Deere diesel engine, equipped with 250CFM, trailer mounted. BILL OF SALE

365
SULLAIR 1600HAF AIR COMPRESSOR SN:N/A powered by Cat C15 diesel engine, 535HP, equipped with 1600CFM, ST235/80R16 tires, trailer mounted. BILL OF SALE

366
KUBOTA UTILITY VEHICLE 4x4, powered by diesel engine, equipped with OROPS, utility body. BILL OF SALE

367
BENFORD TX1200DPR ASPHALT ROLLER SN:EX11CC212 powered by Deutz diesel engine, equipped with ROPS, 47in. Smooth drum, vibratory drum, double drum, water system.

368
DYNAPAC CC1000 ASPHALT ROLLER SN:90130072 powered by diesel engine, equipped with ROPS, 40in. Smooth drum, vibratory drum, double drum, drum drive, water system, 197 hours. 

369
LEEBOY 8500LD ASPHALT PAVER SN:2877LD powered by 4 cylinder diesel engine, truck hitch, 480 hours. 

370
2009 WACKER 1001 FRONT END DUMP SN:AB101041H AWD, powered by Yanmar diesel engine, equipped with ROPS, front end dumper, 10.0/75-15.3 tires.

371
BENFORD 6000 FRONT END DUMP SN:AH334 AWD, powered by diesel engine, equipped with OROPS, front end dump.

372
LATE ENTRY

373
LATE ENTRY

374
LATE ENTRY

375
2017 FREIGHTLINER ARGOSY COE GLIDER TRUCK TRACTOR VN:HT8713 powered by Detroit Series 60 diesel engine, equipped with Road Ranger 18 speed transmission with 2 speed rear axle, DCF, rear view camera, Airliner suspension Hendrickson air lift steerable pu
2017 FREIGHTLINER ARGOSY COE GLIDER TRUCK TRACTOR VN:HT8713 powered by Detroit Series 60 diesel engine, equipped with Road Ranger 18 speed transmission with 2 speed rear axle, DCF, rear view camer...

376
2008 NOOTEBOOME EURO 92-04 DETACHABLE GOOSENECK TRAILER VN:000701 equipped with non ground bearing, steel deck over wheels, variable extendable deck up to 18'3", 9'10" wide deck, outriggers, Hatz diesel power pack, 4 amber beacon lights, 2 axle interdolly
2008 NOOTEBOOME EURO 92-04 DETACHABLE GOOSENECK TRAILER VN:000701 equipped with non ground bearing, steel deck over wheels, variable extendable deck up to 18'3", 9'10" wide deck, outriggers, Hatz d...

377
1983 STECO DUMP TRUCK VN:N/A powered by diesel engine, equipped with dump body, tarp system, 80,000lb single point suspension, all matching 24in. Radial rubber, truck is a tandem axle, trailer portion is a tandem axle.
1983 STECO DUMP TRUCK VN:N/A powered by diesel engine, equipped with dump body, tarp system, 80,000lb single point suspension, all matching 24in. Radial rubber, truck is a tandem axle, trailer port...

378
1996 FORD E350 VAN TRUCK VN:A12088 powered by Powerstroke diesel engine, equipped with automatic transmission, power steering, van body, LA440 hydraulic lowering rear door/gate, dual wheel single axle.
1996 FORD E350 VAN TRUCK VN:A12088 powered by Powerstroke diesel engine, equipped with automatic transmission, power steering, van body, LA440 hydraulic lowering rear door/gate, dual wheel single a...

379
2008 FORD F250 PICKUP TRUCK VN:15467 2008 Ford F250 pickup truck, VIN 1FTSX20578ED15467, 5.4L gas engine, 177261 miles

380
1984 CHEVY 30 PICKUP TRUCK VN:133508 powered by gas engine, equipped with automatic transmission, power steering, dual wheel single axle.

381
1991 MERCEDES BENZ 350SEL TURBO VIN:591465 4 DOOR MILES:91,277.

382
LATE ENTRY

383
LATE ENTRY

384
CAT 428C TRACTOR LOADER BACKHOE SN:2CR21714 4x4, powered by Cat diesel engine, equipped with EROPS, 3rd valve hydraulics, side shift backhoe with extendahoe, rear auxiliary hydraulics, vertical outriggers, rear hydraulic coupler, 4-in-1 front bucket w/ te
CAT 428C TRACTOR LOADER BACKHOE SN:2CR21714 4x4, powered by Cat diesel engine, equipped with EROPS, 3rd valve hydraulics, side shift backhoe with extendahoe, rear auxiliary hydraulics, vertical out...

385
HYDRAULIC HAMMER TRACTOR LOADER BACKHOE ATTACHMENT

386
30IN. DIGGING BUCKET TRACTOR LOADER BACKHOE ATTACHMENT fits Cat 428.

387
40IN. SLAB BUCKET TRACTOR LOADER BACKHOE ATTACHMENT

387
WERK BRAU RIPPER TOOTH TRACTOR LOADER BACKHOE ATTACHMENT

388
CAT 980F SERIES II RUBBER TIRED LOADER SN:8JN00448 powered by Cat diesel engine, equipped with EROPS, SKF Vogel autolube system, GP bucket w/ BOCE, 29.5R25 rubber.

389
LATE ENTRY

390
2015 WEBER STAHL MULDY 3500 DUMP TRAILER VN:W88001 equipped with tilting body, tail gate, ramps, T85R14C tires, tandem axle.

391
2007 ROUGH RIDER UTILITY TRAILER VN:024950 equipped with 5ft. X 10ft. Deck, aluminum, removeable sides, single axle.

392
EAGER BEAVER 20HAL TAGALONG TRAILER VN:N/A equipped with 20 ton capacity, rear ramps, air brakes, dual wheels, tandem axle.

393
(2) CONCRETE HOPPERS CONCRETE EQUIPMENT

394
CONCRETE BULL FLOATS & FINISHING BROOMS CONCRETE EQUIPMENT

395
CONCRETE COME-A-LONGS & FINISHING TOOLS CONCRETE EQUIPMENT

396
PIN CONNECT EXTENSION HANDLES CONCRETE EQUIPMENT

397
THREADED EXTENSION HANDLES & MOUNTING CONNECTORS CONCRETE EQUIPMENT

398
(6) NEW THREADED EXTENSION HANDLES CONCRETE EQUIPMENT

399
(7) MORTAR TUBS CONCRETE EQUIPMENT

400
CONCRETE BUCKET CONCRETE EQUIPMENT

401
(2) MAGNESIUM SCREEDS CONCRETE EQUIPMENT

402
(5) CONCRETE CHUTES CONCRETE EQUIPMENT

403
CONCRETE LAYDOWN BUCKET CONCRETE EQUIPMENT

404
GAR-BRO CONCRETE LAYDOWN BUCKET CONCRETE EQUIPMENT

405
ALUMINUM CONCRETE LAYDOWN BUCKET CONCRETE EQUIPMENT

406
LATE ENTRY

407
21FT. HOOKLIFT FLATBED HOOK LIFT ATTACHMENT

408
J.C. INDUSTRIES HOOKLIFT CONTAINER HOOK LIFT ATTACHMENT 42in. Walls, swing tailgate.

409
COOPER TANK 20FT. HOOKLIFT CONTAINER HOOK LIFT ATTACHMENT 42in. Walls, swing tailgate.

410
J.C. INDUSTRIES 20FT. HOOKLIFT CONTAINER HOOK LIFT ATTACHMENT 63in. Walls, swing tailgate.

411
J.C. INDUSTRIES 20FT. HOOKLIFT CONTAINER HOOK LIFT ATTACHMENT 63in. Walls, swing tailgate.

412
LATE ENTRY

413
LATE ENTRY

414
HITACHI EX550 HYDRAULIC EXCAVATOR SN:17A1016 powered by diesel engine, equipped with Cab, reach boom, digging bucket, long undercarriage.

414
QUICK COUPLER LIFTING HOOK

415
MSB HYDRAULIC HAMMER HYDRAULIC HAMMER SN:9009D012 fot EX550.

416
2015 DOOSAN DX480LCA-HD HYDRAULIC EXCAVATOR SN:1010598 powered by Doosan DE12T1S diesel engine, equipped with Cab, air, auxiliary hydraulics, 24in. pads, hydraulic quick coupler, 60in. digging bucket, expandable undercarriage, long undercarriage, 525 hour
2015 DOOSAN DX480LCA-HD HYDRAULIC EXCAVATOR SN:1010598 powered by Doosan DE12T1S diesel engine, equipped with Cab, air, auxiliary hydraulics, 24in. pads, hydraulic quick coupler, 60in. digging buck...

417
NEW D & A SILENCE 450DP HYDRAULIC HAMMER HYDRAULIC HAMMER autogrease, chisel point, bull point and blunt end tools, Tool box with nitrogen charging kit.

418
2016 DOOSAN DX225LC-3 HYDRAULIC EXCAVATOR SN:2074 powered by Doosan 5.89L diesel engine, equipped with Cab, air, rearview camera, auxiliary hydraulics, Miller hydraulic quick coupler, Cab care guardrail system, digging bucket, 759 hours.
2016 DOOSAN DX225LC-3 HYDRAULIC EXCAVATOR SN:2074 powered by Doosan 5.89L diesel engine, equipped with Cab, air, rearview camera, auxiliary hydraulics, Miller hydraulic quick coupler, Cab care guar...

419
KOMATSU PC228UCLC-3 HYDRAULIC EXCAVATOR SN:20890 powered by Komatsu diesel engine, equipped with Cab, air, Lincoln autolube, auxiliary hydraulics, 31.5" TBG pads, hydraulic coupler, 42in. Digging bucket, long undercarriage.
KOMATSU PC228UCLC-3 HYDRAULIC EXCAVATOR SN:20890 powered by Komatsu diesel engine, equipped with Cab, air, Lincoln autolube, auxiliary hydraulics, 31.5" TBG pads, hydraulic coupler, 42in. Digging b...

420
FURUKAWA FX275 HYDRAULIC HAMMER HYDRAULIC HAMMER

421
SAMSUNG SE130CL HYDRAULIC EXCAVATOR SN:DAY0435 powered by Cummins diesel engine, equipped with Cab, auxiliary hydraulics, 28" TBG pads, 36in. Digging bucket w/ Mazz hydraulic thumb, long undercarriage.
SAMSUNG SE130CL HYDRAULIC EXCAVATOR SN:DAY0435 powered by Cummins diesel engine, equipped with Cab, auxiliary hydraulics, 28" TBG pads, 36in. Digging bucket w/ Mazz hydraulic thumb, long undercarri...

422
JOHN DEERE 110 HYDRAULIC EXCAVATOR SN:20025 powered by John Deere diesel engine, equipped with Cab, front blade, 28" TBG pads, 32in. Digging bucket.

423
NEW D & A SILENCE 180DP HYDRAULIC HAMMER HYDRAULIC HAMMER with chisel point, bull point and blunt end tools, tool box with nitrogen charging kit.

424
NEW D & A SILENCE 230DP HYDRAULIC HAMMER HYDRAULIC HAMMER with chisel point, bull point and blunt end tools, tool box with nitrogen charging kit.

424
TRAMAC BRV32 HYDRAULIC HAMMER HYDRAULIC HAMMER

425
MSB HYDRAULIC HAMMER HYDRAULIC HAMMER

426
2025 DAEDONG FNG BR24 VIBRO PICK VIBRO RIPPER SN:MBF041

427
PRO DRILL EXCAVATOR ATTACHMENT

428
2016 DOYLE ENGINEERING RAPID HITCH 100E VIBRO POST DRIVER 

429
DAEDONG FNG VIBRATING SHEATHING DRIVER VIBRATING SHEATHING DRIVER rotating head, new jaw.

430
NEW BODINE T1-200 CONCRETE PULVERIZER CONCRETE PULVERIZER 80/80mm, to fit Cat 320/325, Komatsu PC200/250 and similar size machines.

431
NEW BODINE T1-200 MULTI SHEAR MULTI SHEAR 80/80mm, to fit Cat 320/325, Komatsu PC200/250 and similar size machines.

432
SEC 5-TYNE HYDRAULIC DEMO GRAPPLE 

433
NEW BODINE T1-200 GRAPPLE GRAPPLE 80/80mm, to fit Cat 320/325, Komatsu PC200/250 and similar size machines.

434
72IN. DIGGING BUCKET EXCAVATOR BUCKET fot DX480.

435
72IN. DITCHING BUCKET EXCAVATOR BUCKET for PC228.

436
18IN. DIGGING BUCKET EXCAVATOR BUCKET for PC228.

437
RIPPER TOOTH XTRA TIPS EXCAVATOR ATTACHMENT for PC228.

438
CP 54IN. DIGGING BUCKET EXCAVATOR BUCKET for PC228.

439
BODINE 40IN. SLAB BUCKET EXCAVATOR BUCKET

440
HYDRAULIC SIDESHIFT 76IN. FORKS EXCAVATOR ATTACHMENT

441
BOBCAT 66IN. GRAPPLE BUCKET SKID STEER ATTACHMENT

442
KOMATSU 9FT. 6IN. STICK EXCAVATOR ATTACHMENT

443
25FT. LONG REACH STICK W/ LINKAGE & 36IN. DIGGING BUCKET EXCAVATOR ATTACHMENT

444
LATE ENTRY

445
LATE ENTRY

446
HUTTE & CO. BOHRTECHNIK HRR605 TIE BACK DRILL DRILLING RIG powered by Deutz 6 cylinder air cooled diesel engine, equipped with water injection system, 18" TBG pads, 1,465 hours.

447
2008 CASA GRANDE B135 DEEP FOUNDATION DRILLING RIG DRILLING SN:B135Z00111 powered by Cummins diesel engine, equipped with 23" TBG pads, Kelly Bar, hydraulic extendable U/C, with components to convert ot a micropile or double wall caisson drill, torque red
2008 CASA GRANDE B135 DEEP FOUNDATION DRILLING RIG DRILLING SN:B135Z00111 powered by Cummins diesel engine, equipped with 23" TBG pads, Kelly Bar, hydraulic extendable U/C, with components to conve...

448
LATE ENTRY

449
BUNDLE OF 30FT. THREADED ROD DRILLING EQUIPMENT

450
BUNDLE OF MISC THREADED ROD, REBAR, & STEEL FLATBAR DRILLING EQUIPMENT

451
21FT. 10IN. X 9 5/8IN. DRILL ROD W/ 7IN. BEECO THREAD DRILLING EQUIPMENT

452
20FT. 2 X 10FT. X 9 5/8IN. DRILL ROD W/ 7IN. BEECO THREAD DRILLING EQUIPMENT

453
20FT. 2 X 10FT. X 9 5/8IN. DRILL ROD W/ 7IN. BEECO THREAD DRILLING EQUIPMENT

454
16FT. (1FT., 10FT., 5FT.) X 9 5/8IN. DRILL ROD W/ 7IN. BEECO THREAD DRILLING EQUIPMENT

455
10FT. X 9 5/8IN. DRILL ROD W/ 7IN. BEECO THREAD DRILLING EQUIPMENT

456
2FT. X 9 5/8IN. DRILL ROD W/ 7IN. BEECO THREAD DRILLING EQUIPMENT

457
12IN. X 9 5/8IN. DRILL ROD W/ 7IN. BEECO THREAD DRILLING EQUIPMENT

458
35FT. 2.5IN. (6IN, (3) 5FT, 10FT, 2FT; (2) 3FT, 21 1/2IN.) X 4.5IN. DRILL ROD W/ BOX PIN API REGULAR THREAD DRILLING EQUIPMENT

459
29FT. 6IN. (6IN, 1FT, 5FT, 20FT) X 4.5IN. DRILL ROD W/ BOX PIN API REGULAR THREAD & 5IN. STEEL TRICONE BIT DRILLING EQUIPMENT

460
25FT. (20FT, 5FT) X 4.5IN. DRILL ROD W/ BOX PIN API REGULAR THREAD DRILLING EQUIPMENT

461
15FT. (10FT, 5FT) X 4.5IN. DRILL ROD W/ BOX PIN API REGULAR THREAD DRILLING EQUIPMENT

462
10FT. X 4.5IN. DRILL ROD W/ BOX PIN API REGULAR THREAD DRILLING EQUIPMENT

463
16IN. X 4.5IN.; 3FT. X 4.5IN.; 6IN. X 4.5IN.; 16IN. X 5.5IN. DRILL ROD SECTIONS BOX PIN API REGULAR THREAD DRILLING EQUIPMENT

464
LATE ENTRY

465
LATE ENTRY

466
UNUSED HM 27000 AUGER DRIVE EXCAVATOR ATTACHMENT

467
HM 27000 AUGER DRIVE EXCAVATOR ATTACHMENT

468
10FT. X 20IN. AUGER BIT DRILLING EQUIPMENT

469
9FT. 6IN. X 20IN. AUGER BIT EXTENSION DRILLING EQUIPMENT

470
5FT. X 42IN. AUGER BIT DRILLING EQUIPMENT

471
UNUSED 4FT. X 20IN. AUGER BIT DRILLING EQUIPMENT

472
UNUSED 4FT. X 16IN. AUGER BIT DRILLING EQUIPMENT

473
4FT. X 20IN. AUGER BIT DRILLING EQUIPMENT

474
4FT. X 16IN. AUGER BIT DRILLING EQUIPMENT

475
42IN. X 16IN. AUGER BIT DRILLING EQUIPMENT

476
42IN. X 12IN. AUGER BIT DRILLING EQUIPMENT

477
UNUSED 42IN. X 4IN. AUGER BIT DRILLING EQUIPMENT

478
UNUSED 42IN. X 6IN. AUGER BIT DRILLING EQUIPMENT

479
UNUSED 42IN. X 8IN. AUGER BIT DRILLING EQUIPMENT

480
4IN. TO 3IN. AUGER DRIVE COUPLING W/ (3) 3IN. COUPLERS DRILLING EQUIPMENT

481
12.5FT. AUGER EXTENSION DRILLING EQUIPMENT

482
9FT. AUGER EXTENSION DRILLING EQUIPMENT

483
9FT. AUGER EXTENSION DRILLING EQUIPMENT

484
6FT. 2IN. AUGER EXTENSION DRILLING EQUIPMENT

485
6FT. 2IN. AUGER EXTENSION DRILLING EQUIPMENT

486
5FT. 8IN. AUGER EXTENSION DRILLING EQUIPMENT

487
5FT. 1IN. AUGER EXTENSION DRILLING EQUIPMENT

488
5FT. 1IN. AUGER EXTENSION DRILLING EQUIPMENT

489
4FT. AUGER EXTENSION DRILLING EQUIPMENT

490
4FT. AUGER EXTENSION DRILLING EQUIPMENT

491
3FT. AUGER EXTENSION DRILLING EQUIPMENT

492
3FT. AUGER EXTENSION DRILLING EQUIPMENT

493
LATE ENTRY

494
CAISSON DRIVE ADAPTER DRILLING EQUIPMENT

495
CAISSON DRIVE ADAPTER DRILLING EQUIPMENT

496
HOMEMADE J-SLOT DRIVE ADAPTER DRILLING EQUIPMENT

497
24IN. DOUBLE WALL CAISSON MALE/ FEMALR WELD-ON ADAPTER DRILLING EQUIPMENT

498
24IN. DOUBLE WALL CAISSON MALE/ FEMALR WELD-ON ADAPTER DRILLING EQUIPMENT

499
24IN. CUTTING SHOE DRILLING EQUIPMENT

500
20IN. BULLET TOOTH CORE BARREL, 8IN. KELLY BOX DRILLING EQUIPMENT

501
20IN. MUCK BUCKET, 8IN. KELLY BOX DRILLING EQUIPMENT

502
20IN. ROLLER BIT CORE BARREL, 8IN. KELLY BOX DRILLING EQUIPMENT

503
24IN. ROCK AUGER, 8IN. KELLY BOX DRILLING EQUIPMENT

504
20IN. FILL AUGER, 8IN. KELLY BOX DRILLING EQUIPMENT

505
20IN. ROCK AUGER, 8IN. KELLY BOX DRILLING EQUIPMENT

506
20IN. ROCK AUGER, 8IN. KELLY BOX DRILLING EQUIPMENT

507
(2) BOXES OF BULLET TEETH DRILLING EQUIPMENT

507
(2) BOXES OF BULLET TOOTH HOLDERS DRILLING EQUIPMENT

508
24IN. X 5 METER DOUBLE WALL CAISSON W/ CONICAL BOLTS DRILLING EQUIPMENT

509
24IN. X 5 METER DOUBLE WALL CAISSON W/ CONICAL BOLTS & CUTTING SHOE DRILLING EQUIPMENT

509
24" CUTTING SHOE

510
24IN. X 4 METER DOUBLE WALL CAISSON W/ CONICAL BOLTS DRILLING EQUIPMENT

511
24IN. X 4 METER DOUBLE WALL CAISSON W/ CONICAL BOLTS DRILLING EQUIPMENT

512
24IN. X 4 METER DOUBLE WALL CAISSON W/ CONICAL BOLTS DRILLING EQUIPMENT

513
24IN. X 15 METER STARTER PIPE W/ J-TEETH DRILLING EQUIPMENT

514
24IN. X 15 METER STARTER PIPE W/ J-TEETH DRILLING EQUIPMENT

515
24IN. X 15 SINGLE WALL MALE-FEMAL CAISSON DRILLING EQUIPMENT

516
24IN. X 15 SINGLE WALL MALE-FEMAL CAISSON DRILLING EQUIPMENT

517
24IN. X 15 SINGLE WALL MALE-FEMAL CAISSON DRILLING EQUIPMENT

518
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

519
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

520
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

521
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

522
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

523
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

524
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

525
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

526
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

527
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

528
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

529
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

530
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

531
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

532
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

533
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

534
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

535
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

536
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

537
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

538
BOX OF 20 CAISSON CUTTING SHOE TEETH DRILLING EQUIPMENT

539
BOX OF 20 CAISSON CUTTING SHOE TEETH DRILLING EQUIPMENT

540
BOX OF 20 CAISSON CUTTING SHOE TEETH DRILLING EQUIPMENT

541
BOX OF 20 CAISSON CUTTING SHOE TEETH DRILLING EQUIPMENT

542
BOX OF 20 CAISSON CUTTING SHOE TEETH DRILLING EQUIPMENT

543
BOX OF 8 CAISSON CUTTING SHOE TEETH DRILLING EQUIPMENT

544
PALLET OF DRILLING TOOLS DRILLING EQUIPMENT

545
(2) BOXES OF CONICAL BOLTS DRILLING EQUIPMENT

546
(2) BOXES OF WELD ON CONICAL BOLT RECEIVERS DRILLING EQUIPMENT

546
BUNDLE OF HARD FACE STEEL PLATE FOR CORE BARRELS

547
CENTRALIZER DRILL ROD W/ 9IN. STEEL TRICONE ROLLER BIT DRILLING EQUIPMENT

548
PERAK 80 7IN. OVERBURDEN SUPER JAW DOWN THE HOLE HAMMER W/ BIT DRILLING EQUIPMENT 11in. Open, 8in. Closed.

549
6IN. DOWN THE HOLE HAMMER W/ 8IN. BIT DRILLING EQUIPMENT

550
PERAK 180 DOWN THE HOLE HAMMER W/ SUPER JAW & OVERBURDEN BIT DRILLING EQUIPMENT 26in. Open, 22in. Closed.

551
UNUSED PERAK 180 DOWN THE HOLE HAMMER W/ SUPER JAW DRILLING EQUIPMENT 20in. Bit.

552
20IN. DOWN THE HOLE HAMMER BIT DRILLING EQUIPMENT

553
12IN. DOWN THE HOLE HAMMER BIT DRILLING EQUIPMENT

554
9IN. DOWN THE HOLE HAMMER BIT DRILLING EQUIPMENT

555
UNUSED OVERBURDEN SUPER JAW BIT DRILLING EQUIPMENT 11in. open, 8in. Closed.

556
(4) REPLACEMENT BITS FOR SUPER JAW DRILLING EQUIPMENT

557
REPLACEMENT BITS FOR 8IN. SUPERJAW BIT DRILLING EQUIPMENT

557
REPLACEMENT BITS FOR 8" SUPERJAW BIT

557
REPLACEMENT BITS FOR 8" SUPERJAW BIT

557
REPLACEMENT BITS FOR 8" SUPERJAW BIT

557
REPLACEMENT BITS FOR 8" SUPERJAW BIT

558
MISC DRILL BITS DRILLING EQUIPMENT

559
(10) 2IN. CARBIDE BUTTON BITS DRILLING EQUIPMENT

560
(10) 2IN. CARBIDE BUTTON BITS DRILLING EQUIPMENT

561
(10) 3IN. CARBIDE BUTTON BITS DRILLING EQUIPMENT

562
(10) 3IN. CARBIDE BUTTON BITS DRILLING EQUIPMENT

563
8IN. CARBIDE TRICONE ROLLER BIT DRILLING EQUIPMENT

564
12IN. CARBIDE TRICONE ROLLER BIT DRILLING EQUIPMENT

565
12IN. CARBIDE TRICONE ROLLER BIT DRILLING EQUIPMENT

566
17IN. CARBIDE TRICONE ROLLER BIT DRILLING EQUIPMENT

567
ASSORTED SIZE SUB-SAVERS DRILLING EQUIPMENT

568
(3) 8IN. CUTTING SHOES DRILLING EQUIPMENT

569
(5) DRILL ROD LIFTING EYES DRILLING EQUIPMENT

570
J-SLOT FLUSHING BELL DRILLING EQUIPMENT

571
FLUSHING BELL DRILLING EQUIPMENT

572
UNUSED FLUSHING BELL DRILLING EQUIPMENT

573
FLUSHING BELL SUPPORT EQUIPMENT

574
FLUSHING BELL SUPPORT EQUIPMENT

575
FLUSHING BELL SUPPORT EQUIPMENT

576
DOWN THE HOLE HAMMER ADAPTOR DRILLING EQUIPMENT

577
(3) PAILS OF THREADED ROD NUTS DRILLING EQUIPMENT

578
PAIL OF CASAGRANDE UNDERCARRIAGE TRACK PINS EQUIPMENT PART

579
LATE ENTRY

580
LATE ENTRY

581
2015 STS SCHELTZKE MPS 510D-C-AUT GROUT MACHINE SN:150515 powered by JCB Tier IV 1 diesel engine, holding tank and mixing tank, remote control, batch counter, weighing device, STS FS26-3000-HYD hydraulic screw conveyor, self contained pressure washer, wit
2015 STS SCHELTZKE MPS 510D-C-AUT GROUT MACHINE SN:150515 powered by JCB Tier IV 1 diesel engine, holding tank and mixing tank, remote control, batch counter, weighing device, STS FS26-3000-HYD hyd...

582
CEMENT SILO CONCRETE EQUIPMENT

583
CHEMGROUT 550 GROUT PUMP CONCRETE/GROUT PUMP skid mounted.

584
QTY OF GROUT DUMP HOSE SUPPORT EQUIPMENT

585
12 YARD SELF CONTAINED TRANSIT MIXER HOOK LIFT ATTACHMENT powered by Deutz diesel engine, mounted on a hooklift body.

586
LATE ENTRY

587
(3) OIL DRAIN PANS DRILLING EQUIPMENT

588
LATE ENTRY

589
LATE ENTRY

590
QTY OF SCAFFOLDING & FITTINGS SUPPORT EQUIPMENT

591
SKID MOUNTED WASTE OIL TANK FUEL TANK

592
PALLET OF HD CABLE ROLLS SUPPORT EQUIPMENT

593
QTY OF SCAFFOLDING SUPPORT EQUIPMENT

594
QTY OF CATCH BASIN RINGS SUPPORT EQUIPMENT

595
(2) RACKS OF ACCRO JACKS & (2) EMPTY RACKS SUPPORT EQUIPMENT

596
APPROX (7) 8FT. X 8FT. RUBBER BLASTING MATS SUPPORT EQUIPMENT

597
APPROX (17) WIRE ROPE BLASTING MATS SUPPORT EQUIPMENT

598
GRACE 500 GALLON PLASTIC TANK SUPPORT EQUIPMENT

599
15IN. X 6IN. X 28FT. STEEL I-BEAM STEEL BEAM

600
LARGE QTY OF STEEL CAISSION PIPES STEEL PIPE 16'x24"x.75", 15x13 3/8"x.5", 45'x22"x3/8", 20'x13 3/8" rope thread, (4) 45'x8 5/8"x.5", (18) 45'x12.75"x.25", 25'x17 3/4"x3/8", 25'x10.75"x.5", (6) 45'x16.25", 20'x12.75"x.25", 20'x8 5/8"x3/8", 20'x16"x.5", 35
LARGE QTY OF STEEL CAISSION PIPES STEEL PIPE 16'x24"x.75", 15x13 3/8"x.5", 45'x22"x3/8", 20'x13 3/8" rope thread, (4) 45'x8 5/8"x.5", (18) 45'x12.75"x.25", 25'x17 3/4"x3/8", 25'x10.75"x.5", (6) 45'...

601
2000 KG CAPACITY LIFTING MAGNET

602
20FT. CONEX BOX CONTAINER

603
LATE ENTRY

604
QTY OF LIGHTING SUPPLIES SUPPORT EQUIPMENT

605
TRUCK BODY TRUCK PARTS & ACCESSORIES

606
DIAMOND REO FUEL TRUCK FUEL/LUBE TRUCK VIN:575157

606
10 3/4 X 20FT. J-SLOT DRILL PIPE DRILLING EQUIPMENT

606
10 3/4 X 20FT. J-SLOT DRILL PIPE DRILLING EQUIPMENT

606
10 3/4 X 20FT. J-SLOT DRILL PIPE DRILLING EQUIPMENT

607
(2) SETS OF STEEL STAIRS W/ RAILINGS SUPPORT EQUIPMENT

608
LATE ENTRY

609
21.5IN. X 12IN. X 30FT. LOAD TEST I-BEAM STEEL BEAM

610
21.5IN. X 12IN. X 40FT. LOAD TEST I-BEAM STEEL BEAM

611
21.5IN. X 12IN. X 40FT. LOAD TEST I-BEAM STEEL BEAM

612
QTY OF SCAFFOLDING SUPPORT EQUIPMENT

613
LATE ENTRY

614
45FT. FLATBED FLATBED TRAILER VN:N/A equipped 45ft. Fkatbed body with concrete forming hardware: super studs, screw jacks, spring suspension, 11R24.5 tires, tandem axle.

615
UNUSED HOLLAND AIR SLIDE 5TH WHEEL TRUCK PARTS & ACCESSORIES

616
QTY OF ASSORTED SIZE STEEL REBAR STEEL BEAM

617
STACK OF 4 X 4 FORMING TIMBERS SUPPORT EQUIPMENT

618
QTY OF BARRICADES & BARRELS, STEP LADDER SUPPORT EQUIPMENT

619
(4) SETS OF SCAFFOLDING STAIRS SUPPORT EQUIPMENT

620
(2) MISC STEEL BEAMS STEEL BEAM

621
12IN. X 12IN. X 31FT. STEEL BEAM STEEL BEAM

622
12IN. X 12IN. X 31FT. STEEL BEAM STEEL BEAM

623
12IN. X 12IN. X 31FT. STEEL BEAM STEEL BEAM

624
12IN. X 12IN. X 31FT. STEEL BEAM STEEL BEAM

625
12IN. X 12IN. X 31FT. STEEL BEAM STEEL BEAM

626
12IN. X 12IN. X 31FT. STEEL BEAM STEEL BEAM

627
(4) STEEL BOX RUBING 8IN. X 8IN. SUPPORT EQUIPMENT

628
WERNER ALUMINUM EXTENSION LADDER SUPPORT EQUIPMENT

629
LATE ENTRY

630
(15) 15IN. X 14IN. I-BEAMS ASSORTED LENGTH STEEL BEAM

631
QTY OF CHANNEL SUPPORT BEAMS SUPPORT EQUIPMENT

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Brooklyn, NY
 Live Auction w/Online Bidding
Auction Date(s)
Wednesday Jul 24, 2019 Completed
Friday Jul 26, 2019 Completed
Auction Location

Brooklyn, NY 11206
Company
Alex Lyon and Son Auctioneers, Inc.

Website: www.lyonauction.com/

Listing Terms and Conditions
ALEX LYON & SON SALES MANAGERS & AUCTIONEERS, INC.

PO BOX 610 RD #2 BRIDGEPORT, NY 13030

PHONE: 315-633-2944  FAX: 315-633-8010



***NOTE***

IF YOU HAVE A COMPANY NAME THAT WILL NEED TO BE REGISTERED WITH OUR ONLINE BIDDING SYSTEM FOR VEHICLE TITLE INFORMATION, PLEASE DO SO BY GOING TO THE AUCTION HOME PAGE AND FIND THE "CLICK TO REGISTER" LINK, OR LOGIN TO YOUR ACCOUNT AND MAKE SURE YOUR INFORMATION IS UPDATED

A $10,000 Wire Transfer Deposit is needed for approval.   If you are a successful bidder the wire transfer deposit will be applied to your invoice. If your purchase is less than total deposit, your deposit will be applied to your invoice and you will be refunded the remainder of the total deposit. If you are non successful, your deposit is 100% refundable.  Please contact the Lyon office to begin the refund of your deposit. 

WIRE TRANSFER INSTRUCTIONS

“IMPORTANT”

 

You must include your buyer number and sale date as a reference in your wire transfer to ensure proper credit.  Failure to do so may result in a delay in the release  of your equipment, with subsequent storage charges.  Be specific with your bank as to the importance of this reference number! 

 

***Note: ONLINE BIDDING - please reference your online bidder #.  Also reference the name you have registered under. 

YOUR BUYER # IS_____________________________ 

 

AUCTION DATE IS ____________________________

  

TO BANK:                                       KEY BANK 

                                                      115 GENESEE ST. 

                                                      AUBURN, NY 13021

 

  ACCOUNT NAME:                          ALEX LYON & SON 

                                                      RD #2 BOX 610

                                                      7697 STATE ROUTE 31 

                                                      BRIDGEPORT, NY 13030

ACCOUNT NUMBER                       7900204004

  

ROUTING/ABA NUMBER                021300077

 

SWIFT CODE(INTERNATIONAL)   KEYBUS33

 

OUR SALES TAX ID                       16-1209422

Purchases must be removed from the sale site within 7 days of the sale date.  Loading will be on Monday through Saturday from 8:00 AM to 5:00 PM, and if applicable, Sundays from 8:00 AM to 11:00 AM.  Any equipment remaining on the grounds after 7 days will be subject to storage fees or removed at the buyers expense.  Shipping arrangements and cost are the BUYERS SOLE RESPONSIBILITY.

Purchases become the responsibility of and shall be and remain at the risk of the Purchaser immediately upon acceptance of his bid.  It shall be the responsibility of the Purchaser to insure his purchases immediately.

NOTICE – Policy for international Buyers: all international buyers must provide a current, valid passport for identification purposes and a $10,000.00 deposit. The deposit must be made with US funds in form of cashier’s check or wire transfer.

SALES TAX: All sales are subject to sales tax.

SALES TAX EXEMPTIONS: Buyers with a VALID exemption certificate are not required to pay sales tax for equipment and miscellaneous, but MUST present a copy of their certificate at time of registration at EACH SALE.

EXPORTERS:  If you take possession of your purchase in the United States, you must pay sales tax. You must provide the following in order not to be charged:

Bill of Lading – All export purchases must be removed by a trucking company. The trucking company will provide a Bill of Lading with the purchases listed.

NOTE: No items will be released without this document or you may pay tax and be reimbursed once the Bill of Lading or a Dock Receipt is received.

MOTOR VEHICLES AND TRAILER EXEMPTIONS: Specific for each state. Please call office for exemption details.

No sale shall be invalidated by reason of any defect or inaccuracy in any of the lots by reason of their being incorrectly described in this listing or elsewhere and no liability shall be borne by the Auctioneers in respect of any such fault or errors.  These listings have been prepared only as a guide based on information from sources generally believed to be reliable and from the Consignor but the accuracy thereof cannot be guaranteed or warranted by the Auctioneers.  Bidder acknowledges that it is the responsibility to inspect all equipment and to make his own inquires.

There shall be no guarantees or warranties, expressed or implied statutory or otherwise of any nature whatsoever.  Each and every lot will be sold “as is” “where is”.  Specifically, but not to restrict the generality of the foregoing, the Auctioneers make no representation or warranty on any of the lots which are the subject of the auction.

Since the property sold is second-hand property, seller makes no warranty of any kind and sells the goods on an “as-is” basis, further, seller makes no warranty of any kind whatever, expressed or implied: and all implied warranties of merchantability and fitness for a particular purpose are hereby disclaimed to the seller. 

All necessary documents will be mailed within 7 days of the payment. Availability of these documents is subject to provision of the same by the Consignor.

Every person at the Auction site before, during and after the auction sale shall be deemed to be there at his own risk with notice of the condition of the premises, the activities on the premises, and the conduct of the third parties and the Bidder shall advise his agents and employees.

THIS LISTING IS ONLY A GUIDE AND MAY NOT BE ACCURATE IN ANY WAY.  EVERY ITEM WILL SELL “AS IS” “WHERE IS”.  PLEASE INSPECT THE EQUIPMENT PRIOR TO BIDDING.  ALL SALES ARE FINAL.

Tax exempt entities must have their exemption number and state form at the time of the sale or they will be charged sales tax.

Checks will be accepted up to $1000.  "Cash or Company Check" accompanied by current “Bank Letter of Guarantee”, made payable to Alex Lyon & Son. Everything Sells “AS IS, “WHERE IS.” The following charges will apply on all purchases: 

Checks will be accepted up to $1000.  "Cash or Company Check" accompanied by current “Bank Letter of Guarantee”, made payable to Alex Lyon & Son. Everything Sells “AS IS, “WHERE IS.” The following charges will apply on all purchases: (1.) For each unit $30,001.00 and above, a 5.95% administration fee will be assessed when paying with cash or good check. (The standard fee of 8.95% will be assessed when paying with credit card); and (2.) For each unit $1,001- $30,000, a 10% administration fee will be assessed when paying with cash or good check, and a 13% fee will be assessed when paying with credit card. (3.) For each unit $0- $1,000, a 12.5% administration fee will be assessed when paying with cash or good check, and a 15.5% fee will be assessed when paying with credit card.  (4.) An additional 2.5% internet buyers fee will be charged to successful online bidders with a $700 per item cap. Payment requirements subject to change for onsite bidders.  Please contact the auction house for additional information on payment instructions.

 

 (4.) An additional 2.5% internet buyers fee will be charged to successful online bidders with a $700 per item cap. Payment requirements subject to change for onsite bidders.  Please contact the auction house for additional information on payment instructions.

***NOTE** As of February 1, 2018, successful online bidders will now pay an additional 2.5% internet buyers fee with a $700 per item cap. 

All property is sold “AS IS”, WHERE IS" and ALL SALES ARE FINAL. Property is open to thorough public inspection. It is the Bidder’s responsibility to determine condition, age, genuineness, value or any other determinative factor. Alex Lyon & Son may attempt to describe the merchandise in advertising, on the Internet and at the auction but makes no representations. In no event shall Alex Lyon & Son be held responsible for having made or implied any warranty of merchantability or fitness for a particular purpose. Bidder shall be the sole judge of value.

Bidders who bid from off site and are not present at the live auction or preview understand and acknowledge that they may not be able to inspect an item as well as if they examined it in person. It is the Bidder’s responsibility to determine condition, age, genuineness, value or any other determinative factor. Alex Lyon & Son shall endeavor to describe in detail each item and any pertinent information about it.  Alex Lyon & Son will not be responsible for any errors or omissions in the description of the merchandise unless it is a material and intentional misrepresentation of the item itself. Bidder agrees that everything is sold as is and that they may not return any item they purchase.

Please be aware that in addition to the description of each lot being a guide in regards to the condition of the lot, this also applies to the terms in which that lot is sold. It is the buyer's responsibility to listen to the audio or view the chats to know the terms of the purchase. i.e. an individual lot can be sold times the money per piece, per group within the lot, choiced with other lots times the money per piece within each lot, or in any other way the auctioneer announces a lot is to be sold. This will be announced over the audio as well as sent via chat. There is no guarantee this will be noted in the description of a lot, and may not be announced until just prior to a lot being sold. Functionality of the audio or the chat box cannot be guaranteed. A winning internet buyer is still responsible for purchasing a lot or lots in the way in which it or they are sold, regardless of whether or not it is denoted in the description, or if the audio or chat window are fuctioning properly.

Please note that each bid made is legally binding until the lot has been "Sold" online. i.e. the person running the software has hit the "Sold" button and "Sold" is displayed online. This includes if the auctioneer as accepted bid(s) higher than the highest internet bid. The auctioneer reserves the right to revert to the last highest inernet bid, so long as the lot is still open and the bid is still available to "sell" to. This includes if the auctioneer has said "sold" on site. Again, an internet bid is legally binding until the lot is "sold" online, regardless if the auctioneer has attained bids higher than the current highest internet bid or has said "sold" onsite.

Alex Lyon & Son is providing Internet pre-auction and live bidding as a service to Bidder. Bidder acknowledges and understands that this service may or may not function correctly the day of the auction. Under no circumstances shall Bidder have any kind of claim against Alex Lyon & Son or anyone else if the Internet service fails to work correctly before or during the live auction. Alex Lyon & Son will not be responsible for any missed bids from any source. Internet bidders who desire to make certain their bid is acknowledged should use the proxy-bidding feature and leave their maximum bid 24 hours before the auction begins. Alex Lyon & Son reserves the right to withdraw or re-catalog items in this auction.

Purchases must be removed from the sale site within 7 days of the sale date. Loading will be on Monday through Saturday from 8:00 AM to 4:30 PM, and if applicable, Sundays from 8:00 AM to 10:30 AM. These pickup times can change at any time. Any equipment remaining on the grounds after 7 days will be subject to storage fees or removed at the buyers expense. Shipping arrangements and cost are the BUYERS SOLE RESPONSIBILITY

**Notice Regarding Like Kind Exchange

Equipment consigned to this auction may be sold as part of an equipment exchange, pursuant to Section 1031 of the Internal Revenue Code, and the rights of the consignor under the Contract to Auction may be assigned to a third-party Qualified Intermediary

This notice appears as matter of record only.**



101
HAND TRUCK SUPPORT EQUIPMENT

102
HAND TRUCK SUPPORT EQUIPMENT

103
HAND TRUCK SUPPORT EQUIPMENT

104
HAND TRUCK SUPPORT EQUIPMENT

105
CHAPIN BROACAST SPREADER SUPPORT EQUIPMENT

106
2600PSI PRESSURE WASHER SUPPORT EQUIPMENT

107
(2) STEEL BULLARDS SUPPORT EQUIPMENT

108
RED CROWN GAS FUEL PUMP SUPPORT EQUIPMENT

109
PURE OIL CO. FUEL PUMP SUPPORT EQUIPMENT

110
MUSTANG MRD5085 REVERSIBLE PLATE COMPACTGOR SUPPORT EQUIPMENT

111
MUSTANG LF88 PLATE COMPACTOR SUPPORT EQUIPMENT

112
MUSTANG LF88 PLATE COMPACTOR SUPPORT EQUIPMENT

113
AMMANN AVP1240 PLATE COMPACTOR SUPPORT EQUIPMENT

114
WACKER BS700 JUMPING JACK SUPPORT EQUIPMENT

115
TITAN HD INDUSTRIAL AIR COMPRESSOR SUPPORT EQUIPMENT

116
LATE ENTRY

117
STOW 2 BAGGER MORTAR & PLASTER MIXER SUPPORT EQUIPMENT

118
STONE MORTAR & PLASTER MIXER SUPPORT EQUIPMENT BILL OF SALE

119
STONE MORTAR & PLASTER MIXER SUPPORT EQUIPMENT BILL OF SALE

120
(2) STEEL BULLARS SUPPORT EQUIPMENT

121
INGERSOLL RAND AIR WINCH SUPPORT EQUIPMENT

122
SHOP CART

123
SHOP CART SUPPORT EQUIPMENT

124
SHOP CART SUPPORT EQUIPMENT

125
OMNI QUIP 250 CONCRETE BUGGY CONCRETE EQUIPMENT

126
OMNI QUIP WORK PRO 155 CONCRETE BUGGY CONCRETE EQUIPMENT

127
OMNI QUIP WORK PRO 155 CONCRETE BUGGY CONCRETE EQUIPMENT

128
TEMPO GAS CADDY SUPPORT EQUIPMENT

129
AIR LUBRICATION TANK SUPPORT EQUIPMENT

130
BARREL HAND TRUCK SUPPORT EQUIPMENT

131
SWELLEX TEST KIT SUPPORT EQUIPMENT

131
17.5IN. X 22IN. X 5IN. @ 7FT. 4IN., 7FT. 11IN., 15FT. 2IN. (3-TOTAL) STEEL I-BEAMS DRILLING EQUIPMENT

132
WHITEMAN POWER TROWEL SUPPORT EQUIPMENT

133
BARTELL-MORRISON B436 POWER TROWEL SUPPORT EQUIPMENT

134
POWER TROWEL

135
TROWEL BLADES

136
FORK EXTENSIONS ARE 84"

137
BARREL HAND TOOLS

138
BARREL HAND TRUCK

139
LATE ENTRY

140
LATE ENTRY

141
TORCH TANK

142
MILLER BIG BLUE 350 PIPE PRO HRS:286

142
PALLET OF WELDING RODS AND WIRE

143
MILLER MATIC 250 WELDER

144
BURCO MOSA WELDER

145
LINCOLN ELECTRIC AC225 ARC WELDER WELDER

146
VAL 6 INRNA RED OIL HEATER

147
VAL 6 KBE5L RED DIESEL HEATER

148
DAYTON 401C BTU OIL HEATER

148
UNIVERSAL 75-125,000 BTU HEASTER SUPPORT EQUIPMENT

149
R+D PARTS WASHER

150
CENTRAL PNEUMATIC 40LB FLOOR BLAST CABINET SUPPORT EQUIPMENT

151
LATE ENTRY

152
REGENT LIGHT STAND SUPPORT EQUIPMENT

153
CRAFTSMAN LIGHT STAND SUPPORT EQUIPMENT

154
CRAFTSMAN LIGHT STAND SUPPORT EQUIPMENT

155
LATE ENTRY

156
JET J-5550 SHOP DRILL PRESS SUPPORT EQUIPMENT

157
RIDGID 10IN. TABLE SAW W/ PORTABLE STAND SUPPORT EQUIPMENT

158
BOSCH 3PC BATTERY POWERED KIT W/ FLASH LIGHT, DRILL, SAW SUPPORT EQUIPMENT

159
HILTI TE55 HAMMER DRILL SUPPORT EQUIPMENT

160
HILTI TE56 HAMMER DRILL SUPPORT EQUIPMENT

161
MILWAUKEE HD HAMMER DRILL SUPPORT EQUIPMENT

162
BOSCH 11316 DEMO HAMMER SUPPORT EQUIPMENT

163
BOSCH 11316 DEMO HAMMER SUPPORT EQUIPMENT

164
APPROX (14) DRILL BITS SUPPORT EQUIPMENT

165
BOSCH 11224 VSR DRILL SUPPORT EQUIPMENT

166
MAKITA HR2811H HAMMER DRILL SUPPORT EQUIPMENT

167
MAKITA HR2811H HAMMER DRILL SUPPORT EQUIPMENT

168
HILTI UH650 ELECTRIC DRILL SUPPORT EQUIPMENT

169
RYOBI ELECTRIC DRILL SUPPORT EQUIPMENT

170
BOSCH ELECTRIC WRENCH SUPPORT EQUIPMENT

171
BOSCH 1752G RIGHT ANGLE GRINDER SUPPORT EQUIPMENT

172
MAKITA 9227C POLISHER SUPPORT EQUIPMENT

173
HILTI DXE72 POWDER ACUATED NAIL GUN SUPPORT EQUIPMENT

174
HILTI DX36 POWER ACUATED NAIL GUN SUPPORT EQUIPMENT

175
POWER FASTNER P7201 POWDER ACUATED NAIL GUN SUPPORT EQUIPMENT

176
RAMSET SA270 POWDER ACUATED NAIL GUN SUPPORT EQUIPMENT

177
MILWAUKEE ORBITAL SUPER SAWSALL SUPPORT EQUIPMENT

178
CHICAGO ELECTRIC DRILL SUPPORT EQUIPMENT

179
MILWAUKEE SAWSALL SUPPORT EQUIPMENT

180
MILWAUKEE ORBITAL SAWSALL SUPPORT EQUIPMENT

181
7 1/4IN. HD CIRCULAR SAW SUPPORT EQUIPMENT

182
SKILSAW 8 1/4IN. CIRCULAR SAW SUPPORT EQUIPMENT

183
PORTER CABLE ELECT. CIRCULAR SAW SUPPORT EQUIPMENT

184
SKILSAW 8IN. ELECT. CIRCULAR SAW SUPPORT EQUIPMENT

185
MILWAUKEE 7 1/4IN. ELECT. CIRCULAR SAW SUPPORT EQUIPMENT

186
MILWAUKEE 14IN. ABRASIVE CUT-OFF SAW SUPPORT EQUIPMENT

187
DEWALT D28715 ELECT CHOP SAW SUPPORT EQUIPMENT

188
DEWALT DW718 12IN. DOUBLE BEVEL SLIDING COMPOUND MITER SAW SUPPORT EQUIPMENT

189
ROCKWELL RK9000 JAW HORSE SUPPORT EQUIPMENT

190
LATE ENTRY

191
SCHUMACHER BATTERY CHARGER SUPPORT EQUIPMENT

192
NAPA BATTERY CHARGER SUPPORT EQUIPMENT

193
SOLAR BATTERY CHARGER SUPPORT EQUIPMENT

194
JNC 1224 JUMP PACK SUPPORT EQUIPMENT

195
DSR PRO SERIES JUMP PACK SUPPORT EQUIPMENT

196
LATE ENTRY

197
DRAFTING TABLE SUPPORT EQUIPMENT

198
HILTI PR60 ROTARY LASER W/ TRIPOD SUPPORT EQUIPMENT

199
800HV ROTARY LASER SUPPORT EQUIPMENT

200
HILTI PR16 ROTARY LASER SUPPORT EQUIPMENT

201
HILTI PR2-HS ROTARY LASER SUPPORT EQUIPMENT

201
(2) GRADE RODS SUPPORT EQUIPMENT

201
LEKA TCR403 REFLECTORLESS TOTAL STATION SUPPORT EQUIPMENT

202
(2) BOTTLE JACKS SUPPORT EQUIPMENT

203
SUMP PUMP SUPPORT EQUIPMENT

204
EVERBILT SUMP PUMP SUPPORT EQUIPMENT

205
MULTIQUIP SUMP PUMP SUPPORT EQUIPMENT

206
MUSTANG MP4800 SUMP PUMP SUPPORT EQUIPMENT

207
MUSTANG MP4800 SUMP PUMP SUPPORT EQUIPMENT

208
MUSTANG MP4800 SUMP PUMP SUPPORT EQUIPMENT

209
2IN. SUMP PUMP SUPPORT EQUIPMENT

210
WACKER PT3 TRASH PUMP SUPPORT EQUIPMENT

211
TITAN HD 3IN. TRASH PUMP SUPPORT EQUIPMENT

212
HONDA EU1000 GENERATOR SUPPORT EQUIPMENT

213
HONDA EB2500 GENERATOR SUPPORT EQUIPMENT

214
RIDGID FM12180 GENERATOR SUPPORT EQUIPMENT

215
TITAN 8000 HIGH PERFORMANCE GENERATOR SUPPORT EQUIPMENT

216
BRIGGS & STRATTON 5550 WATT GENERATOR SUPPORT EQUIPMENT

217
HOMELIT LB5550 GENERATOR SUPPORT EQUIPMENT

218
8IN. & 6IN. PIPE TESTING PLUGS SUPPORT EQUIPMENT

219
MAKITA ELECT JACK HAMMER W/ HAMMER CART SUPPORT EQUIPMENT

220
DARDA C-12 HYDRAULIUC ROCK SPLITTER SUPPORT EQUIPMENT

221
DARDA C-12 HYDRAULIUC ROCK SPLITTER SUPPORT EQUIPMENT

222
DARDA C-12 HYDRAULIUC ROCK SPLITTER SUPPORT EQUIPMENT

223
DARDA C-12 HYDRAULIUC ROCK SPLITTER SUPPORT EQUIPMENT

224
DARDA C-12 HYDRAULIUC ROCK SPLITTER SUPPORT EQUIPMENT

225
DARDA C-12 HYDRAULIUC ROCK SPLITTER SUPPORT EQUIPMENT

226
HYDRAULIC POWER PACK SUPPORT EQUIPMENT

227
HYDRAULIC POWER PACK SUPPORT EQUIPMENT

228
HYDRAULIC POWER PACK SUPPORT EQUIPMENT

229
HYDRAULIC POWER PACK SUPPORT EQUIPMENT

230
HYDRAULIC POWER PACK SUPPORT EQUIPMENT

231
HYDRAULIC POWER PACK SUPPORT EQUIPMENT

232
REPLACEMENT FEATHERS & WEDGE SUPPORT EQUIPMENT

233
REPLACEMENT FEATHERS & WEDGE SUPPORT EQUIPMENT

234
REPLACEMENT FEATHERS & WEDGE SUPPORT EQUIPMENT

235
REPLACEMENT WEDGES SUPPORT EQUIPMENT

236
SPARE DARDA C-12 HANDLES SUPPORT EQUIPMENT

237
SHOP CART FULL OF NEW GLOVES SUPPORT EQUIPMENT

238
LARGE BOX OF NEW GLOVES SUPPORT EQUIPMENT

239
LARGE BOX OF NEW GLOVES SUPPORT EQUIPMENT

240
LARGE BOX OF NEW GLOVES SUPPORT EQUIPMENT

241
LARGE BOX OF NEW GLOVES SUPPORT EQUIPMENT

242
LARGE BOX OF NEW GLOVES SUPPORT EQUIPMENT

243
(2) ALUMINUM WHEELS SUPPORT EQUIPMENT

244
(2) ALUMINUM WHEELS SUPPORT EQUIPMENT

245
(2) P215/50R17 TIRES ON ALLOY WHEELS SUPPORT EQUIPMENT

246
LATE ENTRY

247
LATE ENTRY

248
LATE ENTRY

249
TOOL BOX SUPPORT EQUIPMENT

250
WALKBEHIND ROLLER SUPPORT EQUIPMENT

251
APPROX 20 ROLLS OF PUMP DISCHARGE HOSE & HOSE COUPLERS SUPPORT EQUIPMENT

252
GRIPHOIST T-20 SUPPORT EQUIPMENT

253
GRIPHOIST T-20 SUPPORT EQUIPMENT

254
GRIPHOIST T-20 SUPPORT EQUIPMENT

255
BATTERY POWERED CONCRETE VIBRATOR SUPPORT EQUIPMENT

256
STOW CONCRETE VIBRATOR SUPPORT EQUIPMENT

257
CONCRETE VIBRATOR SUPPORT EQUIPMENT

258
CONCRETE VIBRATOR SUPPORT EQUIPMENT

259
CONCRETE VIBRATOR SUPPORT EQUIPMENT

260
WACKER CONCRETE VIBRATOR SUPPORT EQUIPMENT

261
CONCRETE VIBRATOR SUPPORT EQUIPMENT

262
CONCRETE VIBRATOR SUPPORT EQUIPMENT

263
CONCRETE VIBRATOR SUPPORT EQUIPMENT

264
BACKPACK CONCRETE VIBRATOR SUPPORT EQUIPMENT

265
RIDGID 60IN. PIPE WRENCH SUPPORT EQUIPMENT

266
(2) RIDGID 48IN. PIPE WRENCHES SUPPORT EQUIPMENT

267
(4) ASSORTED PIPE WRENCHES SUPPORT EQUIPMENT

268
(6) ROLLS OF AIR HOSE SUPPORT EQUIPMENT

269
(3) ROLLS OF GROUT HOSE SUPPORT EQUIPMENT

270
QTY OF SLEDGE HAMMER HEADS, PICK HEADS, HANDLES SUPPORT EQUIPMENT

270
HUSKY 150PSI PORTABLE ELECTRIC AIR COMPRESSOR SUPPORT EQUIPMENT

271
80LB JACK HAMMER SUPPORT EQUIPMENT

272
80LB JACK HAMMER SUPPORT EQUIPMENT

273
80LB JACK HAMMER SUPPORT EQUIPMENT

274
APT JACK HAMMER SUPPORT EQUIPMENT

275
80LB JACK HAMMER SUPPORT EQUIPMENT

276
80LB JACK HAMMER SUPPORT EQUIPMENT

277
SULLAIR JACK HAMMER SUPPORT EQUIPMENT

278
SULLAIR JACK HAMMER SUPPORT EQUIPMENT

279
SULLAIR JACK HAMMER SUPPORT EQUIPMENT

280
APT RIVET BUSTER SUPPORT EQUIPMENT

281
APT RIVET BUSTER SUPPORT EQUIPMENT

282
APT RIVET BUSTER SUPPORT EQUIPMENT

283
APT RIVET BUSTER SUPPORT EQUIPMENT

284
APT RIVET BUSTER SUPPORT EQUIPMENT

285
APT RIVET BUSTER SUPPORT EQUIPMENT

286
APT RIVET BUSTER SUPPORT EQUIPMENT

287
SULLAIR RIVET BUSTER SUPPORT EQUIPMENT

287
LATE ENTRY

288
RIVET BUSTER SUPPORT EQUIPMENT

289
RIVET BUSTER SUPPORT EQUIPMENT

290
RIVET BUSTER SUPPORT EQUIPMENT

291
SULLAIR RIVET BUSTER SUPPORT EQUIPMENT

292
CHIPPING HAMMER SUPPORT EQUIPMENT

293
APT RIVET BUSTER SUPPORT EQUIPMENT

294
CHIPPING HAMMER SUPPORT EQUIPMENT

295
ROCK DRILL SUPPORT EQUIPMENT

296
ROCK DRILL SUPPORT EQUIPMENT

297
ROCK DRILL SUPPORT EQUIPMENT

298
QTY OF AIR & WATER VALVES SUPPORT EQUIPMENT

299
QTY OF JACK HAMMER POINTS & CHISELS SUPPORT EQUIPMENT

300
QTY OF CLAY SPADE BITS SUPPORT EQUIPMENT

301
QTY OF DRILL STEEL SUPPORT EQUIPMENT

302
BIN OF RIVET BUSTER POINTS SUPPORT EQUIPMENT

303
MISC TOOLS SUPPORT EQUIPMENT

304
MISC LIFTING HOOKS SUPPORT EQUIPMENT

305
(5) PICKS SUPPORT EQUIPMENT

306
(14) SMALL SLEDGE HAMMERS SUPPORT EQUIPMENT

307
(9) LARGE SLEDGE HAMMERS SUPPORT EQUIPMENT

308
QTY OF NAIL PULLER BARS & PRY BARS SUPPORT EQUIPMENT

309
(2) MANUAL ROLLERS SUPPORT EQUIPMENT

310
BOX OF FLASHING LIGHTS SUPPORT EQUIPMENT

311
QTY OF ASSORTED BUCKET TEETH SUPPORT EQUIPMENT

312
PALLET OF MISC PINS SUPPORT EQUIPMENT

313
ALLEN ENGINEERING VIBRATING SCREED SUPPORT EQUIPMENT

314
VIBRASTRIKE VIBRATING SCREED SUPPORT EQUIPMENT

315
VIBRASTIKE 5FT & 16FT. REPLACEMENT SCREEDS SUPPORT EQUIPMENT

316
(2) CRATES OF CEMENT FINISHING TOOLS SUPPORT EQUIPMENT

317
CRATE OF NEW CONCRETE ANCHOR STRAPS SUPPORT EQUIPMENT

318
LATE ENTRY

319
RIDE ON CONCRETE POWER TROWEL SUPPORT EQUIPMENT

320
RIDE ON CONCRETE POWER TROWEL SUPPORT EQUIPMENT

320
POWER TROWELL TRANSPORT WHEELS AND HANDLE

321
REPLACEMENT POWER TROWEL BLADES SUPPORT EQUIPMENT

321
LATE ENTRY

322
FILL-RITE ELECT. FUEL PUMP W/ NOZZLE SUPPORT EQUIPMENT

323
FILL-RITE ELECT. FUEL PUMP W/ NOZZLE SUPPORT EQUIPMENT

324
FILL-RITE ELECT. FUEL PUMP W/ NOZZLE SUPPORT EQUIPMENT

325
MARATHON FUEL PUMP SUPPORT EQUIPMENT

326
(4) PIPE STANDS SUPPORT EQUIPMENT

327
(4) 2IN. AIR HOSE SUPPORT EQUIPMENT

328
(4) 2IN. AIR HOSE SUPPORT EQUIPMENT

329
(3) 2IN. AIR HOSES & MISC HOSE SUPPORT EQUIPMENT

330
PAIL OF AIR HOSE COUPLERS SUPPORT EQUIPMENT

331
CRATE OF 1/2IN. D-RINGS SUPPORT EQUIPMENT

332
RACK & CONTENTS, FUEL CANS, HOSE, MISC SUPPORT EQUIPMENT

333
(2) HARRINGTON 3 TON HOISTS, LIFTING CHAINS, CABLES, & MISC SUPPORT EQUIPMENT

334
PALLET OF PUMP SUCTION HOSE SUPPORT EQUIPMENT

335
BICYCLE TAXI SUPPORT EQUIPMENT

336
JOHN DEERE 3 SPEED BICYCLE SUPPORT EQUIPMENT

337
LATE ENTRY

338
GENIE RL4 LIGHT PLANT SN:6437 powered by Kubota diesel engine, equipped with 4-1,000 watt lightbulbs, trailer mounted, 5 hours. BILL OF SALE

339
GENIE RL4 LIGHT PLANT SN:6438 powered by Kubota diesel engine, equipped with 4-1,000 watt lightbulbs, trailer mounted, 5 hours. BILL OF SALE

340
CONTENTS OF (2) LOWER RACKS, GRADE RODS, 6FT-10FT. DRILL STEEL, TOOL BOX ON GROUND SUPPORT EQUIPMENT

341
ALLMAND LIGHT PLANT SN:1134PR003 powered by Kubota diesel engine, equipped with 4-1,000 watt lightbulbs, 6KW, trailer mounted, 1,909 hours. BILL OF SALE

342
METAL BENDER SUPPORT EQUIPMENT

343
MULTIQUIP MB-25HD REBAR BENDER SUPPORT EQUIPMENT

344
MULTIQUIP MB-25HD REBAR BENDER SUPPORT EQUIPMENT

345
MANUAL REBAR BENDER SUPPORT EQUIPMENT

345
MULTIQUIP HBC-25N ELECTRO-HYDRAULIC REBAR CUTTER SUPPORT EQUIPMENT

346
HOTSY 4000PSI PRESSURE WASHER SUPPORT EQUIPMENT

347
EMILIANA SERBATOR FUEL TANK W/ PUMP & CONTAINMENT FUEL TANK

348
EMILIANA SERBATOR FUEL TANK W/ PUMP & CONTAINMENT FUEL TANK

349
PALLET OF MISC LIFTING STRAPS SUPPORT EQUIPMENT

350
INGERSOLL RAND G25 GENERATOR SN:387115 powered by Ingersoll Rand diesel engine, equipped with 25KW, trailer mounted. BILL OF SALE

351
INGERSOLL RAND POWERSOURCE G10 AIR COMPRESSOR SN:373894 powered by Ingersoll Rand diesel engine, equipped with 10KW, 1,046 hours. BILL OF SALE

352
2009 DOOSAN G25E-5 FORKLIFT SN:MF-00653 powered by LP engine, equipped with OROPS, 5,000lb lift capacity, 3-stage mast, Cam sytem hydraulic side shift, 48in. Forks.

352
TOYOTA FGC15 FORKLIFT SN:1195 powered by LP engine, equipped with OROPS, 2-stage mast, 42in. Forks, 2,076 hours.

353
HYSTER 30 FORKLIFT SN:C001B04958G electric powered, equipped with OROPS, 3,000lb lift capacity, 2-stage mast, 60in. Forks.

353
FORKLIFT PROPANE TANK

353
FORKLIFT PROPANE TANK

353
FORKLIFT PROPANE TANK

354
LIFTING HOOKS, LIFTING EYES ON GROUND SUPPORT EQUIPMENT

355
PALLET OF FILTER FABRIC SUPPORT EQUIPMENT

356
QTY OF 4IN. X 4IN. CONCRETE FORMING, TIMBERS UP ON RACKS CONCRETE EQUIPMENT

357
FIRST (2) LIFTS OF ADVANCE LATCHING CONCRETE FORMS: 2FT X 8FT PANELS & MISC CONCRETE EQUIPMENT

358
SECOND (2) LIFTS OF ADVANCE LATCHING CONCRETE FORMS: 8FT. 2FT. & 8FT. X 1FT. CONCRETE EQUIPMENT

359
THIRD (2) LIFTS OF ADVANCE LATCHING CONCRETE FORMS: 8FT. 2FT. & MISC FORMS CONCRETE EQUIPMENT

360
FOURTH (2) LIFTS OF ADVANCE LATHCING FORMS: 8FT. 2FT. & MISC FORMS CONCRETE EQUIPMENT

361
QTY OF FORM HARDWARE ON THE GROUND IN PAILS & STACKED UP & ON RACKS CONCRETE EQUIPMENT

362
INGERSOLL RAND 7/26E AIR COMPRESSOR SN:5Y106295 powered by Ingersoll Rand diesel engine, trailer mounted. BILL OF SALE

363
AIRMAN PDS185S AIR COMPRESSOR SN:B46B41554 powered by Nissan diesel engine, equipped with 185CFM, trailer mounted. BILL OF SALE

364
SULLAIR 250 AIR COMPRESSOR SN:N/A powered by John Deere diesel engine, equipped with 250CFM, trailer mounted. BILL OF SALE

365
SULLAIR 1600HAF AIR COMPRESSOR SN:N/A powered by Cat C15 diesel engine, 535HP, equipped with 1600CFM, ST235/80R16 tires, trailer mounted. BILL OF SALE

366
KUBOTA UTILITY VEHICLE 4x4, powered by diesel engine, equipped with OROPS, utility body. BILL OF SALE

367
BENFORD TX1200DPR ASPHALT ROLLER SN:EX11CC212 powered by Deutz diesel engine, equipped with ROPS, 47in. Smooth drum, vibratory drum, double drum, water system.

368
DYNAPAC CC1000 ASPHALT ROLLER SN:90130072 powered by diesel engine, equipped with ROPS, 40in. Smooth drum, vibratory drum, double drum, drum drive, water system, 197 hours. 

369
LEEBOY 8500LD ASPHALT PAVER SN:2877LD powered by 4 cylinder diesel engine, truck hitch, 480 hours. 

370
2009 WACKER 1001 FRONT END DUMP SN:AB101041H AWD, powered by Yanmar diesel engine, equipped with ROPS, front end dumper, 10.0/75-15.3 tires.

371
BENFORD 6000 FRONT END DUMP SN:AH334 AWD, powered by diesel engine, equipped with OROPS, front end dump.

372
LATE ENTRY

373
LATE ENTRY

374
LATE ENTRY

375
2017 FREIGHTLINER ARGOSY COE GLIDER TRUCK TRACTOR VN:HT8713 powered by Detroit Series 60 diesel engine, equipped with Road Ranger 18 speed transmission with 2 speed rear axle, DCF, rear view camera, Airliner suspension Hendrickson air lift steerable pu
2017 FREIGHTLINER ARGOSY COE GLIDER TRUCK TRACTOR VN:HT8713 powered by Detroit Series 60 diesel engine, equipped with Road Ranger 18 speed transmission with 2 speed rear axle, DCF, rear view camer...

376
2008 NOOTEBOOME EURO 92-04 DETACHABLE GOOSENECK TRAILER VN:000701 equipped with non ground bearing, steel deck over wheels, variable extendable deck up to 18'3", 9'10" wide deck, outriggers, Hatz diesel power pack, 4 amber beacon lights, 2 axle interdolly
2008 NOOTEBOOME EURO 92-04 DETACHABLE GOOSENECK TRAILER VN:000701 equipped with non ground bearing, steel deck over wheels, variable extendable deck up to 18'3", 9'10" wide deck, outriggers, Hatz d...

377
1983 STECO DUMP TRUCK VN:N/A powered by diesel engine, equipped with dump body, tarp system, 80,000lb single point suspension, all matching 24in. Radial rubber, truck is a tandem axle, trailer portion is a tandem axle.
1983 STECO DUMP TRUCK VN:N/A powered by diesel engine, equipped with dump body, tarp system, 80,000lb single point suspension, all matching 24in. Radial rubber, truck is a tandem axle, trailer port...

378
1996 FORD E350 VAN TRUCK VN:A12088 powered by Powerstroke diesel engine, equipped with automatic transmission, power steering, van body, LA440 hydraulic lowering rear door/gate, dual wheel single axle.
1996 FORD E350 VAN TRUCK VN:A12088 powered by Powerstroke diesel engine, equipped with automatic transmission, power steering, van body, LA440 hydraulic lowering rear door/gate, dual wheel single a...

379
2008 FORD F250 PICKUP TRUCK VN:15467 2008 Ford F250 pickup truck, VIN 1FTSX20578ED15467, 5.4L gas engine, 177261 miles

380
1984 CHEVY 30 PICKUP TRUCK VN:133508 powered by gas engine, equipped with automatic transmission, power steering, dual wheel single axle.

381
1991 MERCEDES BENZ 350SEL TURBO VIN:591465 4 DOOR MILES:91,277.

382
LATE ENTRY

383
LATE ENTRY

384
CAT 428C TRACTOR LOADER BACKHOE SN:2CR21714 4x4, powered by Cat diesel engine, equipped with EROPS, 3rd valve hydraulics, side shift backhoe with extendahoe, rear auxiliary hydraulics, vertical outriggers, rear hydraulic coupler, 4-in-1 front bucket w/ te
CAT 428C TRACTOR LOADER BACKHOE SN:2CR21714 4x4, powered by Cat diesel engine, equipped with EROPS, 3rd valve hydraulics, side shift backhoe with extendahoe, rear auxiliary hydraulics, vertical out...

385
HYDRAULIC HAMMER TRACTOR LOADER BACKHOE ATTACHMENT

386
30IN. DIGGING BUCKET TRACTOR LOADER BACKHOE ATTACHMENT fits Cat 428.

387
40IN. SLAB BUCKET TRACTOR LOADER BACKHOE ATTACHMENT

387
WERK BRAU RIPPER TOOTH TRACTOR LOADER BACKHOE ATTACHMENT

388
CAT 980F SERIES II RUBBER TIRED LOADER SN:8JN00448 powered by Cat diesel engine, equipped with EROPS, SKF Vogel autolube system, GP bucket w/ BOCE, 29.5R25 rubber.

389
LATE ENTRY

390
2015 WEBER STAHL MULDY 3500 DUMP TRAILER VN:W88001 equipped with tilting body, tail gate, ramps, T85R14C tires, tandem axle.

391
2007 ROUGH RIDER UTILITY TRAILER VN:024950 equipped with 5ft. X 10ft. Deck, aluminum, removeable sides, single axle.

392
EAGER BEAVER 20HAL TAGALONG TRAILER VN:N/A equipped with 20 ton capacity, rear ramps, air brakes, dual wheels, tandem axle.

393
(2) CONCRETE HOPPERS CONCRETE EQUIPMENT

394
CONCRETE BULL FLOATS & FINISHING BROOMS CONCRETE EQUIPMENT

395
CONCRETE COME-A-LONGS & FINISHING TOOLS CONCRETE EQUIPMENT

396
PIN CONNECT EXTENSION HANDLES CONCRETE EQUIPMENT

397
THREADED EXTENSION HANDLES & MOUNTING CONNECTORS CONCRETE EQUIPMENT

398
(6) NEW THREADED EXTENSION HANDLES CONCRETE EQUIPMENT

399
(7) MORTAR TUBS CONCRETE EQUIPMENT

400
CONCRETE BUCKET CONCRETE EQUIPMENT

401
(2) MAGNESIUM SCREEDS CONCRETE EQUIPMENT

402
(5) CONCRETE CHUTES CONCRETE EQUIPMENT

403
CONCRETE LAYDOWN BUCKET CONCRETE EQUIPMENT

404
GAR-BRO CONCRETE LAYDOWN BUCKET CONCRETE EQUIPMENT

405
ALUMINUM CONCRETE LAYDOWN BUCKET CONCRETE EQUIPMENT

406
LATE ENTRY

407
21FT. HOOKLIFT FLATBED HOOK LIFT ATTACHMENT

408
J.C. INDUSTRIES HOOKLIFT CONTAINER HOOK LIFT ATTACHMENT 42in. Walls, swing tailgate.

409
COOPER TANK 20FT. HOOKLIFT CONTAINER HOOK LIFT ATTACHMENT 42in. Walls, swing tailgate.

410
J.C. INDUSTRIES 20FT. HOOKLIFT CONTAINER HOOK LIFT ATTACHMENT 63in. Walls, swing tailgate.

411
J.C. INDUSTRIES 20FT. HOOKLIFT CONTAINER HOOK LIFT ATTACHMENT 63in. Walls, swing tailgate.

412
LATE ENTRY

413
LATE ENTRY

414
HITACHI EX550 HYDRAULIC EXCAVATOR SN:17A1016 powered by diesel engine, equipped with Cab, reach boom, digging bucket, long undercarriage.

414
QUICK COUPLER LIFTING HOOK

415
MSB HYDRAULIC HAMMER HYDRAULIC HAMMER SN:9009D012 fot EX550.

416
2015 DOOSAN DX480LCA-HD HYDRAULIC EXCAVATOR SN:1010598 powered by Doosan DE12T1S diesel engine, equipped with Cab, air, auxiliary hydraulics, 24in. pads, hydraulic quick coupler, 60in. digging bucket, expandable undercarriage, long undercarriage, 525 hour
2015 DOOSAN DX480LCA-HD HYDRAULIC EXCAVATOR SN:1010598 powered by Doosan DE12T1S diesel engine, equipped with Cab, air, auxiliary hydraulics, 24in. pads, hydraulic quick coupler, 60in. digging buck...

417
NEW D & A SILENCE 450DP HYDRAULIC HAMMER HYDRAULIC HAMMER autogrease, chisel point, bull point and blunt end tools, Tool box with nitrogen charging kit.

418
2016 DOOSAN DX225LC-3 HYDRAULIC EXCAVATOR SN:2074 powered by Doosan 5.89L diesel engine, equipped with Cab, air, rearview camera, auxiliary hydraulics, Miller hydraulic quick coupler, Cab care guardrail system, digging bucket, 759 hours.
2016 DOOSAN DX225LC-3 HYDRAULIC EXCAVATOR SN:2074 powered by Doosan 5.89L diesel engine, equipped with Cab, air, rearview camera, auxiliary hydraulics, Miller hydraulic quick coupler, Cab care guar...

419
KOMATSU PC228UCLC-3 HYDRAULIC EXCAVATOR SN:20890 powered by Komatsu diesel engine, equipped with Cab, air, Lincoln autolube, auxiliary hydraulics, 31.5" TBG pads, hydraulic coupler, 42in. Digging bucket, long undercarriage.
KOMATSU PC228UCLC-3 HYDRAULIC EXCAVATOR SN:20890 powered by Komatsu diesel engine, equipped with Cab, air, Lincoln autolube, auxiliary hydraulics, 31.5" TBG pads, hydraulic coupler, 42in. Digging b...

420
FURUKAWA FX275 HYDRAULIC HAMMER HYDRAULIC HAMMER

421
SAMSUNG SE130CL HYDRAULIC EXCAVATOR SN:DAY0435 powered by Cummins diesel engine, equipped with Cab, auxiliary hydraulics, 28" TBG pads, 36in. Digging bucket w/ Mazz hydraulic thumb, long undercarriage.
SAMSUNG SE130CL HYDRAULIC EXCAVATOR SN:DAY0435 powered by Cummins diesel engine, equipped with Cab, auxiliary hydraulics, 28" TBG pads, 36in. Digging bucket w/ Mazz hydraulic thumb, long undercarri...

422
JOHN DEERE 110 HYDRAULIC EXCAVATOR SN:20025 powered by John Deere diesel engine, equipped with Cab, front blade, 28" TBG pads, 32in. Digging bucket.

423
NEW D & A SILENCE 180DP HYDRAULIC HAMMER HYDRAULIC HAMMER with chisel point, bull point and blunt end tools, tool box with nitrogen charging kit.

424
NEW D & A SILENCE 230DP HYDRAULIC HAMMER HYDRAULIC HAMMER with chisel point, bull point and blunt end tools, tool box with nitrogen charging kit.

424
TRAMAC BRV32 HYDRAULIC HAMMER HYDRAULIC HAMMER

425
MSB HYDRAULIC HAMMER HYDRAULIC HAMMER

426
2025 DAEDONG FNG BR24 VIBRO PICK VIBRO RIPPER SN:MBF041

427
PRO DRILL EXCAVATOR ATTACHMENT

428
2016 DOYLE ENGINEERING RAPID HITCH 100E VIBRO POST DRIVER 

429
DAEDONG FNG VIBRATING SHEATHING DRIVER VIBRATING SHEATHING DRIVER rotating head, new jaw.

430
NEW BODINE T1-200 CONCRETE PULVERIZER CONCRETE PULVERIZER 80/80mm, to fit Cat 320/325, Komatsu PC200/250 and similar size machines.

431
NEW BODINE T1-200 MULTI SHEAR MULTI SHEAR 80/80mm, to fit Cat 320/325, Komatsu PC200/250 and similar size machines.

432
SEC 5-TYNE HYDRAULIC DEMO GRAPPLE 

433
NEW BODINE T1-200 GRAPPLE GRAPPLE 80/80mm, to fit Cat 320/325, Komatsu PC200/250 and similar size machines.

434
72IN. DIGGING BUCKET EXCAVATOR BUCKET fot DX480.

435
72IN. DITCHING BUCKET EXCAVATOR BUCKET for PC228.

436
18IN. DIGGING BUCKET EXCAVATOR BUCKET for PC228.

437
RIPPER TOOTH XTRA TIPS EXCAVATOR ATTACHMENT for PC228.

438
CP 54IN. DIGGING BUCKET EXCAVATOR BUCKET for PC228.

439
BODINE 40IN. SLAB BUCKET EXCAVATOR BUCKET

440
HYDRAULIC SIDESHIFT 76IN. FORKS EXCAVATOR ATTACHMENT

441
BOBCAT 66IN. GRAPPLE BUCKET SKID STEER ATTACHMENT

442
KOMATSU 9FT. 6IN. STICK EXCAVATOR ATTACHMENT

443
25FT. LONG REACH STICK W/ LINKAGE & 36IN. DIGGING BUCKET EXCAVATOR ATTACHMENT

444
LATE ENTRY

445
LATE ENTRY

446
HUTTE & CO. BOHRTECHNIK HRR605 TIE BACK DRILL DRILLING RIG powered by Deutz 6 cylinder air cooled diesel engine, equipped with water injection system, 18" TBG pads, 1,465 hours.

447
2008 CASA GRANDE B135 DEEP FOUNDATION DRILLING RIG DRILLING SN:B135Z00111 powered by Cummins diesel engine, equipped with 23" TBG pads, Kelly Bar, hydraulic extendable U/C, with components to convert ot a micropile or double wall caisson drill, torque red
2008 CASA GRANDE B135 DEEP FOUNDATION DRILLING RIG DRILLING SN:B135Z00111 powered by Cummins diesel engine, equipped with 23" TBG pads, Kelly Bar, hydraulic extendable U/C, with components to conve...

448
LATE ENTRY

449
BUNDLE OF 30FT. THREADED ROD DRILLING EQUIPMENT

450
BUNDLE OF MISC THREADED ROD, REBAR, & STEEL FLATBAR DRILLING EQUIPMENT

451
21FT. 10IN. X 9 5/8IN. DRILL ROD W/ 7IN. BEECO THREAD DRILLING EQUIPMENT

452
20FT. 2 X 10FT. X 9 5/8IN. DRILL ROD W/ 7IN. BEECO THREAD DRILLING EQUIPMENT

453
20FT. 2 X 10FT. X 9 5/8IN. DRILL ROD W/ 7IN. BEECO THREAD DRILLING EQUIPMENT

454
16FT. (1FT., 10FT., 5FT.) X 9 5/8IN. DRILL ROD W/ 7IN. BEECO THREAD DRILLING EQUIPMENT

455
10FT. X 9 5/8IN. DRILL ROD W/ 7IN. BEECO THREAD DRILLING EQUIPMENT

456
2FT. X 9 5/8IN. DRILL ROD W/ 7IN. BEECO THREAD DRILLING EQUIPMENT

457
12IN. X 9 5/8IN. DRILL ROD W/ 7IN. BEECO THREAD DRILLING EQUIPMENT

458
35FT. 2.5IN. (6IN, (3) 5FT, 10FT, 2FT; (2) 3FT, 21 1/2IN.) X 4.5IN. DRILL ROD W/ BOX PIN API REGULAR THREAD DRILLING EQUIPMENT

459
29FT. 6IN. (6IN, 1FT, 5FT, 20FT) X 4.5IN. DRILL ROD W/ BOX PIN API REGULAR THREAD & 5IN. STEEL TRICONE BIT DRILLING EQUIPMENT

460
25FT. (20FT, 5FT) X 4.5IN. DRILL ROD W/ BOX PIN API REGULAR THREAD DRILLING EQUIPMENT

461
15FT. (10FT, 5FT) X 4.5IN. DRILL ROD W/ BOX PIN API REGULAR THREAD DRILLING EQUIPMENT

462
10FT. X 4.5IN. DRILL ROD W/ BOX PIN API REGULAR THREAD DRILLING EQUIPMENT

463
16IN. X 4.5IN.; 3FT. X 4.5IN.; 6IN. X 4.5IN.; 16IN. X 5.5IN. DRILL ROD SECTIONS BOX PIN API REGULAR THREAD DRILLING EQUIPMENT

464
LATE ENTRY

465
LATE ENTRY

466
UNUSED HM 27000 AUGER DRIVE EXCAVATOR ATTACHMENT

467
HM 27000 AUGER DRIVE EXCAVATOR ATTACHMENT

468
10FT. X 20IN. AUGER BIT DRILLING EQUIPMENT

469
9FT. 6IN. X 20IN. AUGER BIT EXTENSION DRILLING EQUIPMENT

470
5FT. X 42IN. AUGER BIT DRILLING EQUIPMENT

471
UNUSED 4FT. X 20IN. AUGER BIT DRILLING EQUIPMENT

472
UNUSED 4FT. X 16IN. AUGER BIT DRILLING EQUIPMENT

473
4FT. X 20IN. AUGER BIT DRILLING EQUIPMENT

474
4FT. X 16IN. AUGER BIT DRILLING EQUIPMENT

475
42IN. X 16IN. AUGER BIT DRILLING EQUIPMENT

476
42IN. X 12IN. AUGER BIT DRILLING EQUIPMENT

477
UNUSED 42IN. X 4IN. AUGER BIT DRILLING EQUIPMENT

478
UNUSED 42IN. X 6IN. AUGER BIT DRILLING EQUIPMENT

479
UNUSED 42IN. X 8IN. AUGER BIT DRILLING EQUIPMENT

480
4IN. TO 3IN. AUGER DRIVE COUPLING W/ (3) 3IN. COUPLERS DRILLING EQUIPMENT

481
12.5FT. AUGER EXTENSION DRILLING EQUIPMENT

482
9FT. AUGER EXTENSION DRILLING EQUIPMENT

483
9FT. AUGER EXTENSION DRILLING EQUIPMENT

484
6FT. 2IN. AUGER EXTENSION DRILLING EQUIPMENT

485
6FT. 2IN. AUGER EXTENSION DRILLING EQUIPMENT

486
5FT. 8IN. AUGER EXTENSION DRILLING EQUIPMENT

487
5FT. 1IN. AUGER EXTENSION DRILLING EQUIPMENT

488
5FT. 1IN. AUGER EXTENSION DRILLING EQUIPMENT

489
4FT. AUGER EXTENSION DRILLING EQUIPMENT

490
4FT. AUGER EXTENSION DRILLING EQUIPMENT

491
3FT. AUGER EXTENSION DRILLING EQUIPMENT

492
3FT. AUGER EXTENSION DRILLING EQUIPMENT

493
LATE ENTRY

494
CAISSON DRIVE ADAPTER DRILLING EQUIPMENT

495
CAISSON DRIVE ADAPTER DRILLING EQUIPMENT

496
HOMEMADE J-SLOT DRIVE ADAPTER DRILLING EQUIPMENT

497
24IN. DOUBLE WALL CAISSON MALE/ FEMALR WELD-ON ADAPTER DRILLING EQUIPMENT

498
24IN. DOUBLE WALL CAISSON MALE/ FEMALR WELD-ON ADAPTER DRILLING EQUIPMENT

499
24IN. CUTTING SHOE DRILLING EQUIPMENT

500
20IN. BULLET TOOTH CORE BARREL, 8IN. KELLY BOX DRILLING EQUIPMENT

501
20IN. MUCK BUCKET, 8IN. KELLY BOX DRILLING EQUIPMENT

502
20IN. ROLLER BIT CORE BARREL, 8IN. KELLY BOX DRILLING EQUIPMENT

503
24IN. ROCK AUGER, 8IN. KELLY BOX DRILLING EQUIPMENT

504
20IN. FILL AUGER, 8IN. KELLY BOX DRILLING EQUIPMENT

505
20IN. ROCK AUGER, 8IN. KELLY BOX DRILLING EQUIPMENT

506
20IN. ROCK AUGER, 8IN. KELLY BOX DRILLING EQUIPMENT

507
(2) BOXES OF BULLET TEETH DRILLING EQUIPMENT

507
(2) BOXES OF BULLET TOOTH HOLDERS DRILLING EQUIPMENT

508
24IN. X 5 METER DOUBLE WALL CAISSON W/ CONICAL BOLTS DRILLING EQUIPMENT

509
24IN. X 5 METER DOUBLE WALL CAISSON W/ CONICAL BOLTS & CUTTING SHOE DRILLING EQUIPMENT

509
24" CUTTING SHOE

510
24IN. X 4 METER DOUBLE WALL CAISSON W/ CONICAL BOLTS DRILLING EQUIPMENT

511
24IN. X 4 METER DOUBLE WALL CAISSON W/ CONICAL BOLTS DRILLING EQUIPMENT

512
24IN. X 4 METER DOUBLE WALL CAISSON W/ CONICAL BOLTS DRILLING EQUIPMENT

513
24IN. X 15 METER STARTER PIPE W/ J-TEETH DRILLING EQUIPMENT

514
24IN. X 15 METER STARTER PIPE W/ J-TEETH DRILLING EQUIPMENT

515
24IN. X 15 SINGLE WALL MALE-FEMAL CAISSON DRILLING EQUIPMENT

516
24IN. X 15 SINGLE WALL MALE-FEMAL CAISSON DRILLING EQUIPMENT

517
24IN. X 15 SINGLE WALL MALE-FEMAL CAISSON DRILLING EQUIPMENT

518
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

519
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

520
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

521
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

522
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

523
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

524
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

525
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

526
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

527
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

528
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

529
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

530
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

531
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

532
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

533
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

534
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

535
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

536
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

537
BOX OF 100 NEW KENNEMETAL J-TEETH DRILLING EQUIPMENT

538
BOX OF 20 CAISSON CUTTING SHOE TEETH DRILLING EQUIPMENT

539
BOX OF 20 CAISSON CUTTING SHOE TEETH DRILLING EQUIPMENT

540
BOX OF 20 CAISSON CUTTING SHOE TEETH DRILLING EQUIPMENT

541
BOX OF 20 CAISSON CUTTING SHOE TEETH DRILLING EQUIPMENT

542
BOX OF 20 CAISSON CUTTING SHOE TEETH DRILLING EQUIPMENT

543
BOX OF 8 CAISSON CUTTING SHOE TEETH DRILLING EQUIPMENT

544
PALLET OF DRILLING TOOLS DRILLING EQUIPMENT

545
(2) BOXES OF CONICAL BOLTS DRILLING EQUIPMENT

546
(2) BOXES OF WELD ON CONICAL BOLT RECEIVERS DRILLING EQUIPMENT

546
BUNDLE OF HARD FACE STEEL PLATE FOR CORE BARRELS

547
CENTRALIZER DRILL ROD W/ 9IN. STEEL TRICONE ROLLER BIT DRILLING EQUIPMENT

548
PERAK 80 7IN. OVERBURDEN SUPER JAW DOWN THE HOLE HAMMER W/ BIT DRILLING EQUIPMENT 11in. Open, 8in. Closed.

549
6IN. DOWN THE HOLE HAMMER W/ 8IN. BIT DRILLING EQUIPMENT

550
PERAK 180 DOWN THE HOLE HAMMER W/ SUPER JAW & OVERBURDEN BIT DRILLING EQUIPMENT 26in. Open, 22in. Closed.

551
UNUSED PERAK 180 DOWN THE HOLE HAMMER W/ SUPER JAW DRILLING EQUIPMENT 20in. Bit.

552
20IN. DOWN THE HOLE HAMMER BIT DRILLING EQUIPMENT

553
12IN. DOWN THE HOLE HAMMER BIT DRILLING EQUIPMENT

554
9IN. DOWN THE HOLE HAMMER BIT DRILLING EQUIPMENT

555
UNUSED OVERBURDEN SUPER JAW BIT DRILLING EQUIPMENT 11in. open, 8in. Closed.

556
(4) REPLACEMENT BITS FOR SUPER JAW DRILLING EQUIPMENT

557
REPLACEMENT BITS FOR 8IN. SUPERJAW BIT DRILLING EQUIPMENT

557
REPLACEMENT BITS FOR 8" SUPERJAW BIT

557
REPLACEMENT BITS FOR 8" SUPERJAW BIT

557
REPLACEMENT BITS FOR 8" SUPERJAW BIT

557
REPLACEMENT BITS FOR 8" SUPERJAW BIT

558
MISC DRILL BITS DRILLING EQUIPMENT

559
(10) 2IN. CARBIDE BUTTON BITS DRILLING EQUIPMENT

560
(10) 2IN. CARBIDE BUTTON BITS DRILLING EQUIPMENT

561
(10) 3IN. CARBIDE BUTTON BITS DRILLING EQUIPMENT

562
(10) 3IN. CARBIDE BUTTON BITS DRILLING EQUIPMENT

563
8IN. CARBIDE TRICONE ROLLER BIT DRILLING EQUIPMENT

564
12IN. CARBIDE TRICONE ROLLER BIT DRILLING EQUIPMENT

565
12IN. CARBIDE TRICONE ROLLER BIT DRILLING EQUIPMENT

566
17IN. CARBIDE TRICONE ROLLER BIT DRILLING EQUIPMENT

567
ASSORTED SIZE SUB-SAVERS DRILLING EQUIPMENT

568
(3) 8IN. CUTTING SHOES DRILLING EQUIPMENT

569
(5) DRILL ROD LIFTING EYES DRILLING EQUIPMENT

570
J-SLOT FLUSHING BELL DRILLING EQUIPMENT

571
FLUSHING BELL DRILLING EQUIPMENT

572
UNUSED FLUSHING BELL DRILLING EQUIPMENT

573
FLUSHING BELL SUPPORT EQUIPMENT

574
FLUSHING BELL SUPPORT EQUIPMENT

575
FLUSHING BELL SUPPORT EQUIPMENT

576
DOWN THE HOLE HAMMER ADAPTOR DRILLING EQUIPMENT

577
(3) PAILS OF THREADED ROD NUTS DRILLING EQUIPMENT

578
PAIL OF CASAGRANDE UNDERCARRIAGE TRACK PINS EQUIPMENT PART

579
LATE ENTRY

580
LATE ENTRY

581
2015 STS SCHELTZKE MPS 510D-C-AUT GROUT MACHINE SN:150515 powered by JCB Tier IV 1 diesel engine, holding tank and mixing tank, remote control, batch counter, weighing device, STS FS26-3000-HYD hydraulic screw conveyor, self contained pressure washer, wit
2015 STS SCHELTZKE MPS 510D-C-AUT GROUT MACHINE SN:150515 powered by JCB Tier IV 1 diesel engine, holding tank and mixing tank, remote control, batch counter, weighing device, STS FS26-3000-HYD hyd...

582
CEMENT SILO CONCRETE EQUIPMENT

583
CHEMGROUT 550 GROUT PUMP CONCRETE/GROUT PUMP skid mounted.

584
QTY OF GROUT DUMP HOSE SUPPORT EQUIPMENT

585
12 YARD SELF CONTAINED TRANSIT MIXER HOOK LIFT ATTACHMENT powered by Deutz diesel engine, mounted on a hooklift body.

586
LATE ENTRY

587
(3) OIL DRAIN PANS DRILLING EQUIPMENT

588
LATE ENTRY

589
LATE ENTRY

590
QTY OF SCAFFOLDING & FITTINGS SUPPORT EQUIPMENT

591
SKID MOUNTED WASTE OIL TANK FUEL TANK

592
PALLET OF HD CABLE ROLLS SUPPORT EQUIPMENT

593
QTY OF SCAFFOLDING SUPPORT EQUIPMENT

594
QTY OF CATCH BASIN RINGS SUPPORT EQUIPMENT

595
(2) RACKS OF ACCRO JACKS & (2) EMPTY RACKS SUPPORT EQUIPMENT

596
APPROX (7) 8FT. X 8FT. RUBBER BLASTING MATS SUPPORT EQUIPMENT

597
APPROX (17) WIRE ROPE BLASTING MATS SUPPORT EQUIPMENT

598
GRACE 500 GALLON PLASTIC TANK SUPPORT EQUIPMENT

599
15IN. X 6IN. X 28FT. STEEL I-BEAM STEEL BEAM

600
LARGE QTY OF STEEL CAISSION PIPES STEEL PIPE 16'x24"x.75", 15x13 3/8"x.5", 45'x22"x3/8", 20'x13 3/8" rope thread, (4) 45'x8 5/8"x.5", (18) 45'x12.75"x.25", 25'x17 3/4"x3/8", 25'x10.75"x.5", (6) 45'x16.25", 20'x12.75"x.25", 20'x8 5/8"x3/8", 20'x16"x.5", 35
LARGE QTY OF STEEL CAISSION PIPES STEEL PIPE 16'x24"x.75", 15x13 3/8"x.5", 45'x22"x3/8", 20'x13 3/8" rope thread, (4) 45'x8 5/8"x.5", (18) 45'x12.75"x.25", 25'x17 3/4"x3/8", 25'x10.75"x.5", (6) 45'...

601
2000 KG CAPACITY LIFTING MAGNET

602
20FT. CONEX BOX CONTAINER

603
LATE ENTRY

604
QTY OF LIGHTING SUPPLIES SUPPORT EQUIPMENT

605
TRUCK BODY TRUCK PARTS & ACCESSORIES

606
DIAMOND REO FUEL TRUCK FUEL/LUBE TRUCK VIN:575157

606
10 3/4 X 20FT. J-SLOT DRILL PIPE DRILLING EQUIPMENT

606
10 3/4 X 20FT. J-SLOT DRILL PIPE DRILLING EQUIPMENT

606
10 3/4 X 20FT. J-SLOT DRILL PIPE DRILLING EQUIPMENT

607
(2) SETS OF STEEL STAIRS W/ RAILINGS SUPPORT EQUIPMENT

608
LATE ENTRY

609
21.5IN. X 12IN. X 30FT. LOAD TEST I-BEAM STEEL BEAM

610
21.5IN. X 12IN. X 40FT. LOAD TEST I-BEAM STEEL BEAM

611
21.5IN. X 12IN. X 40FT. LOAD TEST I-BEAM STEEL BEAM

612
QTY OF SCAFFOLDING SUPPORT EQUIPMENT

613
LATE ENTRY

614
45FT. FLATBED FLATBED TRAILER VN:N/A equipped 45ft. Fkatbed body with concrete forming hardware: super studs, screw jacks, spring suspension, 11R24.5 tires, tandem axle.

615
UNUSED HOLLAND AIR SLIDE 5TH WHEEL TRUCK PARTS & ACCESSORIES

616
QTY OF ASSORTED SIZE STEEL REBAR STEEL BEAM

617
STACK OF 4 X 4 FORMING TIMBERS SUPPORT EQUIPMENT

618
QTY OF BARRICADES & BARRELS, STEP LADDER SUPPORT EQUIPMENT

619
(4) SETS OF SCAFFOLDING STAIRS SUPPORT EQUIPMENT

620
(2) MISC STEEL BEAMS STEEL BEAM

621
12IN. X 12IN. X 31FT. STEEL BEAM STEEL BEAM

622
12IN. X 12IN. X 31FT. STEEL BEAM STEEL BEAM

623
12IN. X 12IN. X 31FT. STEEL BEAM STEEL BEAM

624
12IN. X 12IN. X 31FT. STEEL BEAM STEEL BEAM

625
12IN. X 12IN. X 31FT. STEEL BEAM STEEL BEAM

626
12IN. X 12IN. X 31FT. STEEL BEAM STEEL BEAM

627
(4) STEEL BOX RUBING 8IN. X 8IN. SUPPORT EQUIPMENT

628
WERNER ALUMINUM EXTENSION LADDER SUPPORT EQUIPMENT

629
LATE ENTRY

630
(15) 15IN. X 14IN. I-BEAMS ASSORTED LENGTH STEEL BEAM

631
QTY OF CHANNEL SUPPORT BEAMS SUPPORT EQUIPMENT