Surplus Contractor Equipment & Farm Supplies - Guelph
Listing ID#: 1372839

Auction Location
Guelph, ON N1H 6H8
Full Address Available on Saturday, Feb 19
Auction Dates and TimesSALE IS COMPLETED
Bidding Starts: Sunday Feb 20
Bidding Ends: Thursday Feb 24
Auction Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
Rapid-Sell c/o David Moore & Associates Inc.

Website: www.mooreandassociates.on.ca

GoToAuction.com ID#: 5077
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Terms and Conditions - To Bid and Buy REGISTRATION & IDENTIFICATION: At the time of registration, we collect information about you to verify who you are before you can bid. We collect credit card information to ensure that you are a qualified buyer. All bidders must be of legal age to bid. PAYING FOR YOUR PURCHASES: There is no cost to register for an auction. Your credit card will not be charged unless you win. When an auction closes, if you are the winner, we will charge your credit card with the winning bid amount, plus applicable Buyers Premium and taxes, as stated in terms of auction. Credit Cards include Visa and Mastercard only. REVIEWING YOUR BIDS: During an auction you can check the status of your bids at anytime. Note that no bids can be withdrawn after the auction for any reason. All items are sold as is, where is, with all faults. BIDDING NOTIFICATIONS: You can choose to be notified by e-mail during the auction if you have been outbid. Please note that outbid notifications are NOT sent out during the last two hours of the sale. WINNING NOTIFICATION & INVOICING: All winning bidders will receive an e-mailed invoice the morning after the auction closes. PICKUPS & REMOVALS: Dates and times for pickup will be posted on our website. We do not ship. Do not bid if you are unable to have your items picked up. Any item not picked up during the posted pickup times will be considered an abandoned item. Items are sold as is, where is, with all faults. If you abandon an item, your credit card will be charged for the purchase price of the item plus the cost to remove, transport and dispose the item. CONDITIONS OF ITEMS SOLD & OUR ONLINE CATALOGUE: Our best efforts are made to represent all items accurately in descriptions and photographs; however, all items are ultimately sold on an 'as is, where is' basis, with all faults. We strongly encourage all bidders to personally verify the condition of each item during the scheduled preview times. No responsibility is assumed by Rapid Sell or the seller for any errors or omissions. CLAIMS: No claims regarding goods purchased will be allowed. Bidders are reminded that all goods are sold on an 'as is, where is' basis, with all faults. PERSONAL & PROPERTY RISKS: We will not be liable for damage or injury to individuals or their property. ADDITIONS & DELETIONS: We reserve the right to remove and/or add lots and/or items to the sale at any point during the auction. BUYERS: The BUYER expressly agrees to indemnify and save Rapid Sell, the Seller and their assigns harmless from and against all claims, losses, expenses, damage or liability, directly or indirectly caused by or resulting from an act, including the negligent acts or omissions of Rapid Sell, or anyone acting in his/her behalf in connection with or arising out of auction. All bidders/buyers must be of legal age. RESERVE: Seldom are items sold with Reserve. If an item is being sold with a reserve, it will be clearly marked and identified. For items sold with a 'reserve', you will be required to pay a minimum amount in order to win the item. AUCTION RECORDS: In the unlikely event of a dispute, you agree to accept as true the information that we have in our records. SOFT CLOSE: Items close at regular intervals. To prevent a bidder from 'sniping', all bids made in the last minute of the auction will force an item to stay open for an additional 3 minutes. This will continue until all bidding has ceased. Most of our auction lots close in 10 second intervals. In other words, if an auction has 100 lots and is scheduled to close at 9:00 p.m., the first lot will close at 9:00 pm (soft close in effect) while the 100th lot will close at approx. 9:16 p.m. (soft close in effect). STRATEGY: We recommend that ALL BIDDERS put in their maximum bid when placing a bid online. This does not mean you will have to pay the amount you bid; you only pay one bid more than the next highest bid, and only up to your maximum bid. The software system will play out the bids as you would at a live auction and only uses the funds required to beat out the under-bidder at the prescribed bid increment. CATALOGUE ERRORS & OMISSIONS: If a description does not match a picture in a lot, the description takes precedence. All items are sold on an 'as is, where is' basis, with all faults. By bidding you are acknowledging agreement with the terms above.Do not bid unless you agree to all of these terms.
Listing Information
This surplus equipment auction includes items for the contractor, farmer and the DIYer. Items include power and hand tools, hardware and organizers, air compressors, shelving units, a 20 ton shop press, a parts washer and a 1998 pickup truck with plow. There's also walnut lumber, antique window frames, tires, an Old Timer wood stove, farm gates and much more. Over 375+ lots!

1
1998 Chevrolet Silverado 4x4 & Western Plow
- ran when parked in 2020 - suspected fuel line needs to be replaced to run (also since had a mouse infestation in cab) - Western Unimount 90" 3 way snow plow - power seats, power mirrors, power windows - 254,000km - 350 Vortec - a truck that has an...

1
Auction Info - Please Read
Bidding Opens: Sunday February 20th, 2022 at 12:00 noon Bidding Begins to Close: Thursday February 24th, 2022 at 8:00 pm (soft close in effect) Preview Date/Time: Wednesday, February 23rd, 2022 from 1:00 pm - 4:00 pm at 7814 Hwy, 7, Guelph by sche...

1
Sprayer on Wagon
- sprayer mounted on wagon - 200 gallon tank - approx. 40' boom length - includes spare parts and pressure monitor - soap marker also included

2
Dynablast Hot Water Heater Module
- model MHG400P - 300 GPH, 3,000 PSI, 200ºF temp - propane powered, 350,000 input BTU - to be picked up during last hour of scheduled pickup time frame

3
Pressure Washer
- 5hp, 230V, 2000 PSI - model 415PWS - Baldor motor, General Pump model T1321 - comes with hose, wand and reel as pictured - use with lot #002 for effective cleaning

4
CAI Air Compressor
- model KC5-80V-1 - with WEG 5hp 208-230V motor - tested and working- a real shop workhorse - to be unhooked at end of hose -to be picked up during last hour of scheduled pickup time frame

5
Husky Tool Chest
- 41" w x 17 1/2" d x 63" h - 8 upper section separates from lower half - upper section houses 8 drawers and pop up lid - lower section houses 11 drawers and pull out bench - lower right drawer is off tracks - on 5" casters

6
20 Ton Shop Press
- 23 1/2" w x 57 1/2" h - hydraulic press

7
40 Gallon Parts Washer
- 31" x 21" x 34" - model PW20 - responds to power but fluid coming from nozzle ** buyer to empty washer of fluid at pick up

8
Titan Airless Sprayer XT330
- responds to power - comes with new spray gun and new intake screen - owner's manual and spare parts included

9
Hardware Rack with Contents
- 37" w x 20" d x 49" h - steel construction with plastic bins - all contents included - most hardware is new and galvanized or zinc coated - various hardware from 8" leg bolts to deck screws - very good value in this lot

10
Hitachi C10FS Compound Saw
- 10" slide compound saw - tested and working - brand new 10" Diablo blade installed - also includes Hitachi UU 610 Universal Work Station, aluminum construction, 54" wide with adjustable width work rests x 34" tall

11
Milwaukee Heavy Duty Polisher
- variable speed - 7"/9" diameter - tested and working

12
Milwaukee Scope Camera
- approx. 38" scope length - tested and working - comes with 1 M12 battery pack and charger - adjustable light and zoom functions

13
Milwaukee Heavy Duty Orbital Super Sawzall
- tested and working - adjustable speed - adjustable handle rotation 360º - 9" long blade

14
Milwaukee 7 1/4" Circular Saw
- tested and working - Tilt-Lok adjustable handle

15
Mastercraft Floor Nailer
- drives 1 1/2" - 2" and T and L cleat nails - operates with 90-120 PSI - 60 staples or 120 cleat nail capacity - appears lightly used

16
RotoZip by Bosch
- model RZ10 - tested and working - with RotoZip ZM² attachment - 3.5" silicone/carbide blade

17
Mastercraft Cordless Inpact Driver
- 10.8V - tested and working - includes 2 batteries and charger

18
Milwaukee 1/2" Drill
- no battery - comes with M18 charger and tool bag

19
Milwaukee Heavy Duty Electric Shear and Light
- 18 Ga Mdoel 6852-20 - tested and working - comes with Milwaukee V28 work light - no battery with work light - comes with M18 battery charger - comes with tool bag

20
Stanley Black Socket Set
- 3/8" and 1/4" drive wrenches - metric and imperial sockets - missing 5mm socket

21
Weller Solder Gun
- model D550 - 260/200 watts - responds to power

22
RotoZip Tools by Bosch
- model RTM01 Rotomite - model DR1 - both tested and working - comes with 5 drywall zip bits

23
Sheet Metal Hammers and Dolly Set
- 3 sheet metal hammers - 4 dollies - case is broken

24
Bostitch Air Nailer
- comes with magazine of framing nails

25
Freud Orbital Jigsaw
- FJ85 - tested and working - owner's manual included

26
Mastercraft Maximum Socket Set
- 1/2", 3/8", 1/4" drive wrenches - metric and imperial sockets - Torx bits - metric and imperail allen key sets - missing 3 impact driver bits - case has broken latches

27
Husky Socket Set
- 3/8" drive - missing 1 extension

28
Paslode Floor Nailer
- model 3150/38 N18 air nailer - 120 PSI max - uses 1/2" - 1 1/2" staples - comes with wood case

29
Mastercraft Wet Sharpener
- model 55-3504-4 - tested and working - motor is noisy

30
Paslode 30° Cordless Framing Nailer
- model IMLi325 - uses 2" x .113mm to 3 1/4" x .131mm nails - can use 7.4 volt battery pack included or orange quicklode fuel cartridge - owner's manual included - charger not included

31
Paslode Finish Nailer
- model IMLi200 - 18 Ga - uses battery or fuel cell (both included) - uses 18 gauge, straight brads fasteners - includes battery charger

32
Paslode Brad Nailer
- model IM200F18 - uses battery or fuel cell to operate - 3 batteries and charger included - uses 18 gauge straight brad fasteners

33
Glue Gun and Heat Gun
- both tested and working - comes with package of 7 glue sticks

34
3.5 RAE Bench Vise
- 3.5" jaw - made in Canada - nice little vise!

35
Stinger Wet/Dry Vac
- model WD20250 - 4 amp motor - tested and working - nice, compact size

36
3 Work Lights
- 2 halogen lights, 1 LED - both halogen lights do not work - LED light works - comes with milk crate

37
Bucket of Screwdrivers
- various types and conditions - approx. 47 plus 1 hammerhead

38
Assorted Adjustable Wrenches
- 12 in total - sizes from 1/2" to 1 1/2" jaws

39
Delta Bench Grinder
- model 23-640C - 6" grinders - tested and working

40
More Screwdrivers!
- approx. 35 screwdrivers - various types and sizes

41
Even More Screwdrivers!
- approx. 35 screwdrivers - various types and sizes

42
Pliers and Vise Grips
- 3 needlenose, 3 vise grips - 2 side cutters, 1 pair of snips - 3 adjustable, 1 wire stripper - 1 small 3" clamp

43
Tool Bucket Organizer
- includes assortment of approx. 20 screwdrivers - 1 adjustable wrench - 3 allen keys - pliers and chisels

44
Assortment of Scrapers & Spatulas
- 7 scrapers of various types - 3 spatulas - 1 brush

45
Assortment of Saws
- hack saw, coping saw - flush cut saw - 2 other wood saws

46
Files and Gecko Gauges
- 7 various files - plus file cleaning brush - plus 1 adjustable clamp - Gecko gauges for siding installation

47
Remington Powder Tools
- 2 tools - comes with 4 partial boxes of cartridges

48
Marples Wood Working Tools
- 7 wood lathe tools - see photos for condition - all appear sharp - some have been re-sharpened

49
Shop Helpers Assortment
- trouble light, working with extra bulb - tape measures, chalk line, Inspection mirror - 2 magnetic trays, infrared thermometer (needs batteries) - glass cutter, Pyrex measuring cup - etc....a great lot!

50
Solid Work Bench
- steel frame - 3/4" plywood top - 8' long x 3' 2" wide x 46" tall at back shelf - 2" square steel frame with lower shelf ** does NOT included contents in or around bench ** please schedule a late pickup time for this lot

51
Pop Rivet Kit and Screw Bits
- 4 pop rivet hand tools with assorted rivets - Flambeau tackle box with nice assortment of drill bits and impact drivers - note damage on both toolbox and tackle box

52
Plumbing Kit
- fantastic assortment of plumbing tools for the DIY-er - 4 propane cylinders partly used - assortment of solder and flux - ABS glues - brass and copper fittings - pipe flanges, pipe cutters, steel brushes, torches, etc.

53
Assorted Drill Bits
- approx. 75 drill bits - various sizes, types and conditions - 8 spade bits - 1 x 23 1/2" concrete bit

54
9 1/2" anvil
- 9 1/2" long x 4 1/2" tall - no manufacturer markings

55
Record Bolt Cutters
- nice large set of bolt cutters - Record model 936 - measures 36" tip to tip - jaws appear in nice shape

56
24" Bolt Cutters and Pruning Snips
- 24" bolt cutters - jaws appear in good condition - pruning shears are broken but fixable with new hardware

57
Oilers and Funnels and Hose
- 3 oilers, 3 funnels - 1 jug, 2 x oil siphons - approx. 3' of 3/8" rubber fuel line - various brass fittings

58
Grease Guns
- 2 x 11" grease guns - silver has flex hose - both loaded with grease

59
Assorted Saw Blades and Grinding Wheels
- 1 x 12" wood saw blade, used but has plenty of life left - 6 x 7" saw blades, used with life left - 3 x 12" metal chop saw blades, 1 lightly used, other 2 are in new condition - 1 x 10" Diamond blade, used with life left - 18 x new in package cut-o...

60
Air Pig
- 7 gallon - with hose and tire inflator - note: gauge on tank is broken

61
Air Tools
- 3/8" air ratchet - air drill with forward and reverse - Campbell Hausfeld air hammer with chisel tip - ITC orbital air sander with velcro style pad - all NOT tested

62
More Air Tools
- 2 x air hammers - 1 x 3/8" air ratchet - includes 3 air hammer tips

63
Hammer Time!
- 3 air hammers; 2 Mastercraft and 1 Campbell Hausfeld (missing spring) - includes 9 tips

64
Air Hose
- approx. 40' of green air hose - approx. 25' of red air hose

65
Campbell Hausfeld Air Compressor
- 4 gallon, 125 PSI max - comes with adjustable regulator and filter - approx. 10' air hose with air chuck fitting - tested and working

66
Air Fittings Plus
- fantastic assortment of male and female fittings - brass couplers, air chucks, 4 air nozzles, thread tape - fittings are mostly 1/4"

67
Mastercraft Maximum Socket Set #1
- metric and imperial - 3/8" drive 6pt deep sockets - 3/8" drive 6pt shallow sockets - 1/4" drive 6pt deep sockets - Torx and allen bits included in this set - missing bits: No. 4 allen, 9/16" shallow socket, 3/8" deep socket, 8mm shallow socket, 13...

68
Mastercraft Maximum Socket Set #2
- 3/8" and 1/2" drive 12pt shallow sockets - metric and imperial - 4 spark plug sockets - 4 x 1/2" drive extensions - 1 x 1/4" drive extension 1/2", 3/8" 1/4" drive wrenches (note: 3/8" wrench is different brand) - missing bits: 9/16", 5/16", 11/3...

69
Mastercraft Maximum Socket Set #3
- metric and imperial - 1/2" drive deep sockets (6pt) - 1/2" drive shallow sockets (6pt) - 3/8" drive shallow sockets (6pt) - a complete set

70
Coffee Can of Sockets Pt. 1
- assorted sizes and types - largest is 32mm and 1 1/4" - smallest is 3/8" - approx. 50 sockets

71
Coffee Can of Sockets Pt. 2
- assorted sizes and types - 3 swivel sockets - assortment of 3/8" drive torx bits and allen bits - largest socket 1 1/4" and 24mm - smallest socket 3/8" and 8mm - approx. 64 sockets

72
Socket Organizers! (And Others!)
- would be handy to have for lots 70 or 71! - each labeled for metric and imperial sizes - larger organizers are for 1/2" drive - smaller organizers are for 1/4" drive

73
Metric & Imperial Combination Wrenches
- Mastercraft wrenches - imperial missing 1/2" and 9 1/6" - metric missing 8mm

74
Wrenches and Extensions
- 3 x breaker bars, 1/2", 3/8" and 1/4" - 11 x extensions, longest is 10" - 2 x 1/2" drive Mastercraft wrenches

75
Stubby Wrenches
- metric and imperial - 10 metrics from 7mm to 22mm (missing 13mm, 16mm, 17mm, 20mm, 21mm) - 11 imperial wrenches, complete set from 1/4" to 7/8"

76
Mastercraft Wrenches Pt. 1
- mostly Mastercraft Maximim - larger imperial and metric sizes - imperial complete from 11/16" to 1" size (6 total) - metric omplete from 6mm to 24mm (15 total), missing 15mm, 20mm, 21mm and 23mm)

77
Mastercraft Wrenches Pt. 2
- mostly Mastercraft Maximum - from 1/4" to 1 1/8" - multiple duplicates of 1/4", 3/8" and 11/32" sizes - 19 wrenches total

78
Mastercraft Wrenches Pt. 3
- mostly Mastercraft Maximum - metric and imperial - metric from 6mm to 24mm (see photos for sizes) - note some metrics are tube wrenches - larger imperial sizes from 11/16" to 1" - 18 wrenches in total

79
Last of the Wrenches
- mostly Mastercraft wrenches - from 1/4" to 1 1/16" - see photos for size inclusions - 18 wrenches in total

80
Hammers & Punches (& Hatchets Too!)
- 11 steel punches - 7 brass punches - assorted hammers - 2 hatchets

81
Cut and Repair
- great assortment of exacto knives and replacement blades - sharpening stone and 3 scrapers included - tire and vinyl repair kit - includes vinyl patches, tire plugs, vinyl/rubber glue - includes repair tools as well!

82
3/4" Drive Socket Set
- 15 sockets from 7/8" to 2" - missing 1 1/2" socket - includes break bar, extensions and 1/2" drive to 3/4" adapter

83
Ignition Service and Compression Tester
- feeler gauges - spark plug wire testers - ignition wrench set - 2 x new NGK BR8ECS plugs - compression tester with adapters and manual

84
Oil Filter Wrenches and Allen Key Sets
- 5 oil filter wrenches - assortment of metric and SAE allen key sets - also includes Fram PH3675 oil filter and CNH 84299977 fuel filter

85
Automotive Electrical
- various lengths of wire and wire loom - 12V plugs, lights, toggle switches - 2 sets of booster cables - battery terminal lugs - great value in this lot!

86
Wall Mounted Battery Charger Plus
- charges 12V at 2 amps - also includes 100W 12V power inverter - also incudes 120V 200W magnet heater - also includes 2 x inline coolant heaters

87
Brake Line Repair Kit
- Westward Flair Kit complete - brake line bender - extra flare bits and flare presses - extra tube cutters and de-bur tool - approx. 6' 3/16" brake line - approx. 10' 5/16" brake line

88
Puller and Spreader
- power built puller with 4" max jaw - 2 x spreader kits

89
Misc. From Around the Shop
- 2 x For Sale signs - 1 x IH Sign (reproduction) - Garmin GPS - small aluminum clipboard with storage - McCormick W-10 tractor model (needs repair) - Crossman air pistol - see photos for the rest

90
2 Ton Jack Stands
- 3 jack stands - 10 1/2" at lowest, 17 1/2" at tallest

91
Aluminum Jack Stands and Bottle Jacks
- 2 x 3 ton aluminum jack stands - 10" at lowest, 15 1/2" at highest - 1 x 20 ton bottle jack - 1 x 2 ton bottle jack - both jacks working

92
3 Heavy Duty Jack Stands
- unknown capacity - 15" height at lowest, 25" at tallest

93
Roller Support Stand and Pipe Clamps
- Jobmate roller stand, adjustable from 27" to 44" high - 132lb capacity - 2 pipe clamps, approx. 24" long

94
Contractor Lighting
- 10 sockets total - approx. 10' between each socket - 150 watt max per socket - tested and working

95
Lincoln Electric and Shop Misc.
- dial missing from side of helmet - auto darkening function, does not seem to work - submersible electric pump, responds to power - Dremel engraver, working - Black & Decker corded drill, working - Proctor Silex 4 slice toaster, untested - Noma ligh...

96
Sandpaper Lot
- new pack of 20 sheet 3M 220 grit - 2 new 80 grit 4" wide belts - large roll of 240 grit emery cloth, approx. 35" wide - large roll of 120 grit sandpaper, 3.5" wide - 5" diam. palm sander

97
Delphi Blower Fan
- belt driven - tested and driven - approx. 12" drum fan

98
Misc. Trailer Electrical
- 2 x 7 pin male ends - 4 female 5/7 pin ends - new 4 pin wiring kit with 60" wiring - new T-connector kit - 2 x 5 pin to 4 pin flat adapter plugs - 1 x 7 pin wiring tester

99
Plastic Drawer Organizers
- 12" wide x 14" tall x 6 1/2" deep - mostly empty - remaining contents included

100
Concrete Trowel Groover
- new - 24" x 8" - Kraft Tool Co. Airplane Groover

101
Hardware Organizer #1
- 11 1/2" x 9" x 5" - all contents included - includes 2 other organizers with contents - plastic construction

102
Hardware Organizer #2
- 12" x 16 1/2" x 5 3/4" - Holt brand - missing 2 drawers, all contents included - tin construction - includes UEI Co. detector for multimeter, untested

103
Foam & Tar Gasket Strips
- approx. 20' of 4" wide foam weather strip - approx. 20' of 5 1/2" wide yellow foam weather strip - new pack of 3/16" x 3/8" x 16' 4" of weather strip - 7 rolls of tar gasket strips, 25' per roll - approx. 7' of 1" foam weather strip

104
Coffee Cans of Hardware
- loads of hardware! - box of 3 1/2" nails - wood screws, machine screws, plastic anchors, etc. - 3 x GM cargo tie downs (new) - approx. 40lbs of hardware

105
More Hardware
- 4 plastic trays with various contents - partial box of 2" rivets - nuts, bolts, glazier points, box of gear clamps, etc. - U-bolts and 3 1/2" exhaust clamps - various pens/markers/soap stones, etc.

106
Candle Lanterns and Space Heater
- 2 x tin lanterns, 11" tall x 5" square - small space heater, tested and working - also approx. 50 x 11" zip ties - large roll of 'Caution' tape

107
3 Adjustable Floor Scrapers
- 8" Razor jaw - adjusts from 38" to 56" - all require new blades

108
Fire Safety
- 1 x refillable water loaded extinguisher, recharges with air compressor, approx. 24" tall - 1 x smaller ABC extinguisher with good charge, approx. 12" tall

109
Painter's Lot
- approx. 4.78L of Varsol - 2 new rolls of Ram Board seam tape - partial roll of green painter's tape - 7 new disposable paint trays - 1 new set of disposable coveralls - 7 rub stones - 2 partially used chalkline refills

110
Quikrete Lot
- approx. 4.78L of concrete bonding adhesive - approx. 1.5L of acrylic fortifier - approx. 0.5L of patching compound - 2 partially used tubs of water plug (.75kg approx.) - approx. 30lb of Quikrete multipurpose sand - 2 containers of chalkline refill

111
Polar Blox Snow Guards
- used on steel roofs to stop snow slides - all new - 15 Polar Blox - guards are 5" w x 3" tall

112
Steel Roofing Hardware
- dark grey coloured screw heads - approx. 150 screws - 2" long

113
Heavy Duty Casters
- 6 in total - 4 swivel, 2 fixed - 5" caster wheels - swivel casters are locking - all appear new

114
Forced Air Propane Heater
- 150,000 BTU - on/off function (no thermostat) - in working order

115
Roof Jacks
- 5 in total, 4 appear new - yellow holds 2" x 6" at 60º - red holds 2" x 8" at 60º

116
Heavy Duty 100' Extension Cord
- 10 gauge cord, 15 amp, 125V - appears in good shape - no noticeable cuts or damages

117
Tile and Grout Lot
- approx. 1L primer for self leveling compounds - 59 white 7.5cm x 30cm subway tile in boxes - 2 unopened bags of Mapei grout (white & grey) - 4 partial bags of Mapei grout (3 white, 1 chocolate) - container of approx. 35 tile spacers

118
Extension Cords That Need Help
- orange is 10 gauge, approx. 25', needs new female end - black is approx. 25', needs new female end

119
Nail Gun Hardware
- 27 spools of 1 1/4" x .120 roofing nails - 7 spools of 3 1/4" x .120 framing nails - 4 partial spools of framing nails - 2 partial spools of 2 3/4" roofing nails

120
All Purpose Screws
- approx. 750-1000 screws in this lot - #8's x 3" - yellow zinc coated

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Sponsored Links

Surplus Contractor Equipment & Farm Supplies - Guelph

Rapid-Sell c/o David Moore & Associates Inc.

Rapid-Sell c/o David Moore & Associates Inc.


Contact:
Phone:
Sale Location
Guelph, ON N1H 6H8
Full Address Available after 9 am
on Saturday, Feb 19
Sale Dates and Times
Sale Terms and Conditions
Terms and Conditions - To Bid and Buy REGISTRATION & IDENTIFICATION: At the time of registration, we collect information about you to verify who you are before you can bid. We collect credit card information to ensure that you are a qualified buyer. All bidders must be of legal age to bid. PAYING FOR YOUR PURCHASES: There is no cost to register for an auction. Your credit card will not be charged unless you win. When an auction closes, if you are the winner, we will charge your credit card with the winning bid amount, plus applicable Buyers Premium and taxes, as stated in terms of auction. Credit Cards include Visa and Mastercard only. REVIEWING YOUR BIDS: During an auction you can check the status of your bids at anytime. Note that no bids can be withdrawn after the auction for any reason. All items are sold as is, where is, with all faults. BIDDING NOTIFICATIONS: You can choose to be notified by e-mail during the auction if you have been outbid. Please note that outbid notifications are NOT sent out during the last two hours of the sale. WINNING NOTIFICATION & INVOICING: All winning bidders will receive an e-mailed invoice the morning after the auction closes. PICKUPS & REMOVALS: Dates and times for pickup will be posted on our website. We do not ship. Do not bid if you are unable to have your items picked up. Any item not picked up during the posted pickup times will be considered an abandoned item. Items are sold as is, where is, with all faults. If you abandon an item, your credit card will be charged for the purchase price of the item plus the cost to remove, transport and dispose the item. CONDITIONS OF ITEMS SOLD & OUR ONLINE CATALOGUE: Our best efforts are made to represent all items accurately in descriptions and photographs; however, all items are ultimately sold on an 'as is, where is' basis, with all faults. We strongly encourage all bidders to personally verify the condition of each item during the scheduled preview times. No responsibility is assumed by Rapid Sell or the seller for any errors or omissions. CLAIMS: No claims regarding goods purchased will be allowed. Bidders are reminded that all goods are sold on an 'as is, where is' basis, with all faults. PERSONAL & PROPERTY RISKS: We will not be liable for damage or injury to individuals or their property. ADDITIONS & DELETIONS: We reserve the right to remove and/or add lots and/or items to the sale at any point during the auction. BUYERS: The BUYER expressly agrees to indemnify and save Rapid Sell, the Seller and their assigns harmless from and against all claims, losses, expenses, damage or liability, directly or indirectly caused by or resulting from an act, including the negligent acts or omissions of Rapid Sell, or anyone acting in his/her behalf in connection with or arising out of auction. All bidders/buyers must be of legal age. RESERVE: Seldom are items sold with Reserve. If an item is being sold with a reserve, it will be clearly marked and identified. For items sold with a 'reserve', you will be required to pay a minimum amount in order to win the item. AUCTION RECORDS: In the unlikely event of a dispute, you agree to accept as true the information that we have in our records. SOFT CLOSE: Items close at regular intervals. To prevent a bidder from 'sniping', all bids made in the last minute of the auction will force an item to stay open for an additional 3 minutes. This will continue until all bidding has ceased. Most of our auction lots close in 10 second intervals. In other words, if an auction has 100 lots and is scheduled to close at 9:00 p.m., the first lot will close at 9:00 pm (soft close in effect) while the 100th lot will close at approx. 9:16 p.m. (soft close in effect). STRATEGY: We recommend that ALL BIDDERS put in their maximum bid when placing a bid online. This does not mean you will have to pay the amount you bid; you only pay one bid more than the next highest bid, and only up to your maximum bid. The software system will play out the bids as you would at a live auction and only uses the funds required to beat out the under-bidder at the prescribed bid increment. CATALOGUE ERRORS & OMISSIONS: If a description does not match a picture in a lot, the description takes precedence. All items are sold on an 'as is, where is' basis, with all faults. By bidding you are acknowledging agreement with the terms above.Do not bid unless you agree to all of these terms.
Listing Details
This surplus equipment auction includes items for the contractor, farmer and the DIYer. Items include power and hand tools, hardware and organizers, air compressors, shelving units, a 20 ton shop press, a parts washer and a 1998 pickup truck with plow. There's also walnut lumber, antique window frames, tires, an Old Timer wood stove, farm gates and much more. Over 375+ lots!

1
1998 Chevrolet Silverado 4x4 & Western Plow
- ran when parked in 2020 - suspected fuel line needs to be replaced to run (also since had a mouse infestation in cab) - Western Unimount 90" 3 way snow plow - power seats, power mirrors, power windows - 254,000km - 350 Vortec - a truck that has an...

1
Auction Info - Please Read
Bidding Opens: Sunday February 20th, 2022 at 12:00 noon Bidding Begins to Close: Thursday February 24th, 2022 at 8:00 pm (soft close in effect) Preview Date/Time: Wednesday, February 23rd, 2022 from 1:00 pm - 4:00 pm at 7814 Hwy, 7, Guelph by sche...

1
Sprayer on Wagon
- sprayer mounted on wagon - 200 gallon tank - approx. 40' boom length - includes spare parts and pressure monitor - soap marker also included

2
Dynablast Hot Water Heater Module
- model MHG400P - 300 GPH, 3,000 PSI, 200ºF temp - propane powered, 350,000 input BTU - to be picked up during last hour of scheduled pickup time frame

3
Pressure Washer
- 5hp, 230V, 2000 PSI - model 415PWS - Baldor motor, General Pump model T1321 - comes with hose, wand and reel as pictured - use with lot #002 for effective cleaning

4
CAI Air Compressor
- model KC5-80V-1 - with WEG 5hp 208-230V motor - tested and working- a real shop workhorse - to be unhooked at end of hose -to be picked up during last hour of scheduled pickup time frame

5
Husky Tool Chest
- 41" w x 17 1/2" d x 63" h - 8 upper section separates from lower half - upper section houses 8 drawers and pop up lid - lower section houses 11 drawers and pull out bench - lower right drawer is off tracks - on 5" casters

6
20 Ton Shop Press
- 23 1/2" w x 57 1/2" h - hydraulic press

7
40 Gallon Parts Washer
- 31" x 21" x 34" - model PW20 - responds to power but fluid coming from nozzle ** buyer to empty washer of fluid at pick up

8
Titan Airless Sprayer XT330
- responds to power - comes with new spray gun and new intake screen - owner's manual and spare parts included

9
Hardware Rack with Contents
- 37" w x 20" d x 49" h - steel construction with plastic bins - all contents included - most hardware is new and galvanized or zinc coated - various hardware from 8" leg bolts to deck screws - very good value in this lot

10
Hitachi C10FS Compound Saw
- 10" slide compound saw - tested and working - brand new 10" Diablo blade installed - also includes Hitachi UU 610 Universal Work Station, aluminum construction, 54" wide with adjustable width work rests x 34" tall

11
Milwaukee Heavy Duty Polisher
- variable speed - 7"/9" diameter - tested and working

12
Milwaukee Scope Camera
- approx. 38" scope length - tested and working - comes with 1 M12 battery pack and charger - adjustable light and zoom functions

13
Milwaukee Heavy Duty Orbital Super Sawzall
- tested and working - adjustable speed - adjustable handle rotation 360º - 9" long blade

14
Milwaukee 7 1/4" Circular Saw
- tested and working - Tilt-Lok adjustable handle

15
Mastercraft Floor Nailer
- drives 1 1/2" - 2" and T and L cleat nails - operates with 90-120 PSI - 60 staples or 120 cleat nail capacity - appears lightly used

16
RotoZip by Bosch
- model RZ10 - tested and working - with RotoZip ZM² attachment - 3.5" silicone/carbide blade

17
Mastercraft Cordless Inpact Driver
- 10.8V - tested and working - includes 2 batteries and charger

18
Milwaukee 1/2" Drill
- no battery - comes with M18 charger and tool bag

19
Milwaukee Heavy Duty Electric Shear and Light
- 18 Ga Mdoel 6852-20 - tested and working - comes with Milwaukee V28 work light - no battery with work light - comes with M18 battery charger - comes with tool bag

20
Stanley Black Socket Set
- 3/8" and 1/4" drive wrenches - metric and imperial sockets - missing 5mm socket

21
Weller Solder Gun
- model D550 - 260/200 watts - responds to power

22
RotoZip Tools by Bosch
- model RTM01 Rotomite - model DR1 - both tested and working - comes with 5 drywall zip bits

23
Sheet Metal Hammers and Dolly Set
- 3 sheet metal hammers - 4 dollies - case is broken

24
Bostitch Air Nailer
- comes with magazine of framing nails

25
Freud Orbital Jigsaw
- FJ85 - tested and working - owner's manual included

26
Mastercraft Maximum Socket Set
- 1/2", 3/8", 1/4" drive wrenches - metric and imperial sockets - Torx bits - metric and imperail allen key sets - missing 3 impact driver bits - case has broken latches

27
Husky Socket Set
- 3/8" drive - missing 1 extension

28
Paslode Floor Nailer
- model 3150/38 N18 air nailer - 120 PSI max - uses 1/2" - 1 1/2" staples - comes with wood case

29
Mastercraft Wet Sharpener
- model 55-3504-4 - tested and working - motor is noisy

30
Paslode 30° Cordless Framing Nailer
- model IMLi325 - uses 2" x .113mm to 3 1/4" x .131mm nails - can use 7.4 volt battery pack included or orange quicklode fuel cartridge - owner's manual included - charger not included

31
Paslode Finish Nailer
- model IMLi200 - 18 Ga - uses battery or fuel cell (both included) - uses 18 gauge, straight brads fasteners - includes battery charger

32
Paslode Brad Nailer
- model IM200F18 - uses battery or fuel cell to operate - 3 batteries and charger included - uses 18 gauge straight brad fasteners

33
Glue Gun and Heat Gun
- both tested and working - comes with package of 7 glue sticks

34
3.5 RAE Bench Vise
- 3.5" jaw - made in Canada - nice little vise!

35
Stinger Wet/Dry Vac
- model WD20250 - 4 amp motor - tested and working - nice, compact size

36
3 Work Lights
- 2 halogen lights, 1 LED - both halogen lights do not work - LED light works - comes with milk crate

37
Bucket of Screwdrivers
- various types and conditions - approx. 47 plus 1 hammerhead

38
Assorted Adjustable Wrenches
- 12 in total - sizes from 1/2" to 1 1/2" jaws

39
Delta Bench Grinder
- model 23-640C - 6" grinders - tested and working

40
More Screwdrivers!
- approx. 35 screwdrivers - various types and sizes

41
Even More Screwdrivers!
- approx. 35 screwdrivers - various types and sizes

42
Pliers and Vise Grips
- 3 needlenose, 3 vise grips - 2 side cutters, 1 pair of snips - 3 adjustable, 1 wire stripper - 1 small 3" clamp

43
Tool Bucket Organizer
- includes assortment of approx. 20 screwdrivers - 1 adjustable wrench - 3 allen keys - pliers and chisels

44
Assortment of Scrapers & Spatulas
- 7 scrapers of various types - 3 spatulas - 1 brush

45
Assortment of Saws
- hack saw, coping saw - flush cut saw - 2 other wood saws

46
Files and Gecko Gauges
- 7 various files - plus file cleaning brush - plus 1 adjustable clamp - Gecko gauges for siding installation

47
Remington Powder Tools
- 2 tools - comes with 4 partial boxes of cartridges

48
Marples Wood Working Tools
- 7 wood lathe tools - see photos for condition - all appear sharp - some have been re-sharpened

49
Shop Helpers Assortment
- trouble light, working with extra bulb - tape measures, chalk line, Inspection mirror - 2 magnetic trays, infrared thermometer (needs batteries) - glass cutter, Pyrex measuring cup - etc....a great lot!

50
Solid Work Bench
- steel frame - 3/4" plywood top - 8' long x 3' 2" wide x 46" tall at back shelf - 2" square steel frame with lower shelf ** does NOT included contents in or around bench ** please schedule a late pickup time for this lot

51
Pop Rivet Kit and Screw Bits
- 4 pop rivet hand tools with assorted rivets - Flambeau tackle box with nice assortment of drill bits and impact drivers - note damage on both toolbox and tackle box

52
Plumbing Kit
- fantastic assortment of plumbing tools for the DIY-er - 4 propane cylinders partly used - assortment of solder and flux - ABS glues - brass and copper fittings - pipe flanges, pipe cutters, steel brushes, torches, etc.

53
Assorted Drill Bits
- approx. 75 drill bits - various sizes, types and conditions - 8 spade bits - 1 x 23 1/2" concrete bit

54
9 1/2" anvil
- 9 1/2" long x 4 1/2" tall - no manufacturer markings

55
Record Bolt Cutters
- nice large set of bolt cutters - Record model 936 - measures 36" tip to tip - jaws appear in nice shape

56
24" Bolt Cutters and Pruning Snips
- 24" bolt cutters - jaws appear in good condition - pruning shears are broken but fixable with new hardware

57
Oilers and Funnels and Hose
- 3 oilers, 3 funnels - 1 jug, 2 x oil siphons - approx. 3' of 3/8" rubber fuel line - various brass fittings

58
Grease Guns
- 2 x 11" grease guns - silver has flex hose - both loaded with grease

59
Assorted Saw Blades and Grinding Wheels
- 1 x 12" wood saw blade, used but has plenty of life left - 6 x 7" saw blades, used with life left - 3 x 12" metal chop saw blades, 1 lightly used, other 2 are in new condition - 1 x 10" Diamond blade, used with life left - 18 x new in package cut-o...

60
Air Pig
- 7 gallon - with hose and tire inflator - note: gauge on tank is broken

61
Air Tools
- 3/8" air ratchet - air drill with forward and reverse - Campbell Hausfeld air hammer with chisel tip - ITC orbital air sander with velcro style pad - all NOT tested

62
More Air Tools
- 2 x air hammers - 1 x 3/8" air ratchet - includes 3 air hammer tips

63
Hammer Time!
- 3 air hammers; 2 Mastercraft and 1 Campbell Hausfeld (missing spring) - includes 9 tips

64
Air Hose
- approx. 40' of green air hose - approx. 25' of red air hose

65
Campbell Hausfeld Air Compressor
- 4 gallon, 125 PSI max - comes with adjustable regulator and filter - approx. 10' air hose with air chuck fitting - tested and working

66
Air Fittings Plus
- fantastic assortment of male and female fittings - brass couplers, air chucks, 4 air nozzles, thread tape - fittings are mostly 1/4"

67
Mastercraft Maximum Socket Set #1
- metric and imperial - 3/8" drive 6pt deep sockets - 3/8" drive 6pt shallow sockets - 1/4" drive 6pt deep sockets - Torx and allen bits included in this set - missing bits: No. 4 allen, 9/16" shallow socket, 3/8" deep socket, 8mm shallow socket, 13...

68
Mastercraft Maximum Socket Set #2
- 3/8" and 1/2" drive 12pt shallow sockets - metric and imperial - 4 spark plug sockets - 4 x 1/2" drive extensions - 1 x 1/4" drive extension 1/2", 3/8" 1/4" drive wrenches (note: 3/8" wrench is different brand) - missing bits: 9/16", 5/16", 11/3...

69
Mastercraft Maximum Socket Set #3
- metric and imperial - 1/2" drive deep sockets (6pt) - 1/2" drive shallow sockets (6pt) - 3/8" drive shallow sockets (6pt) - a complete set

70
Coffee Can of Sockets Pt. 1
- assorted sizes and types - largest is 32mm and 1 1/4" - smallest is 3/8" - approx. 50 sockets

71
Coffee Can of Sockets Pt. 2
- assorted sizes and types - 3 swivel sockets - assortment of 3/8" drive torx bits and allen bits - largest socket 1 1/4" and 24mm - smallest socket 3/8" and 8mm - approx. 64 sockets

72
Socket Organizers! (And Others!)
- would be handy to have for lots 70 or 71! - each labeled for metric and imperial sizes - larger organizers are for 1/2" drive - smaller organizers are for 1/4" drive

73
Metric & Imperial Combination Wrenches
- Mastercraft wrenches - imperial missing 1/2" and 9 1/6" - metric missing 8mm

74
Wrenches and Extensions
- 3 x breaker bars, 1/2", 3/8" and 1/4" - 11 x extensions, longest is 10" - 2 x 1/2" drive Mastercraft wrenches

75
Stubby Wrenches
- metric and imperial - 10 metrics from 7mm to 22mm (missing 13mm, 16mm, 17mm, 20mm, 21mm) - 11 imperial wrenches, complete set from 1/4" to 7/8"

76
Mastercraft Wrenches Pt. 1
- mostly Mastercraft Maximim - larger imperial and metric sizes - imperial complete from 11/16" to 1" size (6 total) - metric omplete from 6mm to 24mm (15 total), missing 15mm, 20mm, 21mm and 23mm)

77
Mastercraft Wrenches Pt. 2
- mostly Mastercraft Maximum - from 1/4" to 1 1/8" - multiple duplicates of 1/4", 3/8" and 11/32" sizes - 19 wrenches total

78
Mastercraft Wrenches Pt. 3
- mostly Mastercraft Maximum - metric and imperial - metric from 6mm to 24mm (see photos for sizes) - note some metrics are tube wrenches - larger imperial sizes from 11/16" to 1" - 18 wrenches in total

79
Last of the Wrenches
- mostly Mastercraft wrenches - from 1/4" to 1 1/16" - see photos for size inclusions - 18 wrenches in total

80
Hammers & Punches (& Hatchets Too!)
- 11 steel punches - 7 brass punches - assorted hammers - 2 hatchets

81
Cut and Repair
- great assortment of exacto knives and replacement blades - sharpening stone and 3 scrapers included - tire and vinyl repair kit - includes vinyl patches, tire plugs, vinyl/rubber glue - includes repair tools as well!

82
3/4" Drive Socket Set
- 15 sockets from 7/8" to 2" - missing 1 1/2" socket - includes break bar, extensions and 1/2" drive to 3/4" adapter

83
Ignition Service and Compression Tester
- feeler gauges - spark plug wire testers - ignition wrench set - 2 x new NGK BR8ECS plugs - compression tester with adapters and manual

84
Oil Filter Wrenches and Allen Key Sets
- 5 oil filter wrenches - assortment of metric and SAE allen key sets - also includes Fram PH3675 oil filter and CNH 84299977 fuel filter

85
Automotive Electrical
- various lengths of wire and wire loom - 12V plugs, lights, toggle switches - 2 sets of booster cables - battery terminal lugs - great value in this lot!

86
Wall Mounted Battery Charger Plus
- charges 12V at 2 amps - also includes 100W 12V power inverter - also incudes 120V 200W magnet heater - also includes 2 x inline coolant heaters

87
Brake Line Repair Kit
- Westward Flair Kit complete - brake line bender - extra flare bits and flare presses - extra tube cutters and de-bur tool - approx. 6' 3/16" brake line - approx. 10' 5/16" brake line

88
Puller and Spreader
- power built puller with 4" max jaw - 2 x spreader kits

89
Misc. From Around the Shop
- 2 x For Sale signs - 1 x IH Sign (reproduction) - Garmin GPS - small aluminum clipboard with storage - McCormick W-10 tractor model (needs repair) - Crossman air pistol - see photos for the rest

90
2 Ton Jack Stands
- 3 jack stands - 10 1/2" at lowest, 17 1/2" at tallest

91
Aluminum Jack Stands and Bottle Jacks
- 2 x 3 ton aluminum jack stands - 10" at lowest, 15 1/2" at highest - 1 x 20 ton bottle jack - 1 x 2 ton bottle jack - both jacks working

92
3 Heavy Duty Jack Stands
- unknown capacity - 15" height at lowest, 25" at tallest

93
Roller Support Stand and Pipe Clamps
- Jobmate roller stand, adjustable from 27" to 44" high - 132lb capacity - 2 pipe clamps, approx. 24" long

94
Contractor Lighting
- 10 sockets total - approx. 10' between each socket - 150 watt max per socket - tested and working

95
Lincoln Electric and Shop Misc.
- dial missing from side of helmet - auto darkening function, does not seem to work - submersible electric pump, responds to power - Dremel engraver, working - Black & Decker corded drill, working - Proctor Silex 4 slice toaster, untested - Noma ligh...

96
Sandpaper Lot
- new pack of 20 sheet 3M 220 grit - 2 new 80 grit 4" wide belts - large roll of 240 grit emery cloth, approx. 35" wide - large roll of 120 grit sandpaper, 3.5" wide - 5" diam. palm sander

97
Delphi Blower Fan
- belt driven - tested and driven - approx. 12" drum fan

98
Misc. Trailer Electrical
- 2 x 7 pin male ends - 4 female 5/7 pin ends - new 4 pin wiring kit with 60" wiring - new T-connector kit - 2 x 5 pin to 4 pin flat adapter plugs - 1 x 7 pin wiring tester

99
Plastic Drawer Organizers
- 12" wide x 14" tall x 6 1/2" deep - mostly empty - remaining contents included

100
Concrete Trowel Groover
- new - 24" x 8" - Kraft Tool Co. Airplane Groover

101
Hardware Organizer #1
- 11 1/2" x 9" x 5" - all contents included - includes 2 other organizers with contents - plastic construction

102
Hardware Organizer #2
- 12" x 16 1/2" x 5 3/4" - Holt brand - missing 2 drawers, all contents included - tin construction - includes UEI Co. detector for multimeter, untested

103
Foam & Tar Gasket Strips
- approx. 20' of 4" wide foam weather strip - approx. 20' of 5 1/2" wide yellow foam weather strip - new pack of 3/16" x 3/8" x 16' 4" of weather strip - 7 rolls of tar gasket strips, 25' per roll - approx. 7' of 1" foam weather strip

104
Coffee Cans of Hardware
- loads of hardware! - box of 3 1/2" nails - wood screws, machine screws, plastic anchors, etc. - 3 x GM cargo tie downs (new) - approx. 40lbs of hardware

105
More Hardware
- 4 plastic trays with various contents - partial box of 2" rivets - nuts, bolts, glazier points, box of gear clamps, etc. - U-bolts and 3 1/2" exhaust clamps - various pens/markers/soap stones, etc.

106
Candle Lanterns and Space Heater
- 2 x tin lanterns, 11" tall x 5" square - small space heater, tested and working - also approx. 50 x 11" zip ties - large roll of 'Caution' tape

107
3 Adjustable Floor Scrapers
- 8" Razor jaw - adjusts from 38" to 56" - all require new blades

108
Fire Safety
- 1 x refillable water loaded extinguisher, recharges with air compressor, approx. 24" tall - 1 x smaller ABC extinguisher with good charge, approx. 12" tall

109
Painter's Lot
- approx. 4.78L of Varsol - 2 new rolls of Ram Board seam tape - partial roll of green painter's tape - 7 new disposable paint trays - 1 new set of disposable coveralls - 7 rub stones - 2 partially used chalkline refills

110
Quikrete Lot
- approx. 4.78L of concrete bonding adhesive - approx. 1.5L of acrylic fortifier - approx. 0.5L of patching compound - 2 partially used tubs of water plug (.75kg approx.) - approx. 30lb of Quikrete multipurpose sand - 2 containers of chalkline refill

111
Polar Blox Snow Guards
- used on steel roofs to stop snow slides - all new - 15 Polar Blox - guards are 5" w x 3" tall

112
Steel Roofing Hardware
- dark grey coloured screw heads - approx. 150 screws - 2" long

113
Heavy Duty Casters
- 6 in total - 4 swivel, 2 fixed - 5" caster wheels - swivel casters are locking - all appear new

114
Forced Air Propane Heater
- 150,000 BTU - on/off function (no thermostat) - in working order

115
Roof Jacks
- 5 in total, 4 appear new - yellow holds 2" x 6" at 60º - red holds 2" x 8" at 60º

116
Heavy Duty 100' Extension Cord
- 10 gauge cord, 15 amp, 125V - appears in good shape - no noticeable cuts or damages

117
Tile and Grout Lot
- approx. 1L primer for self leveling compounds - 59 white 7.5cm x 30cm subway tile in boxes - 2 unopened bags of Mapei grout (white & grey) - 4 partial bags of Mapei grout (3 white, 1 chocolate) - container of approx. 35 tile spacers

118
Extension Cords That Need Help
- orange is 10 gauge, approx. 25', needs new female end - black is approx. 25', needs new female end

119
Nail Gun Hardware
- 27 spools of 1 1/4" x .120 roofing nails - 7 spools of 3 1/4" x .120 framing nails - 4 partial spools of framing nails - 2 partial spools of 2 3/4" roofing nails

120
All Purpose Screws
- approx. 750-1000 screws in this lot - #8's x 3" - yellow zinc coated

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Surplus Contractor Equipment & Farm Supplies - Guelph
 Online Only Auction
Auction Date(s)
Bidding Starts: Sunday Feb 20
Bidding Ends: Thursday Feb 24
Auction Location
Guelph, ON N1H 6H8
Full Address Available on Saturday, Feb 19
Company
Rapid-Sell c/o David Moore & Associates Inc.

Website: www.mooreandassociates.on.ca

Listing Terms and Conditions
Terms and Conditions - To Bid and Buy REGISTRATION & IDENTIFICATION: At the time of registration, we collect information about you to verify who you are before you can bid. We collect credit card information to ensure that you are a qualified buyer. All bidders must be of legal age to bid. PAYING FOR YOUR PURCHASES: There is no cost to register for an auction. Your credit card will not be charged unless you win. When an auction closes, if you are the winner, we will charge your credit card with the winning bid amount, plus applicable Buyers Premium and taxes, as stated in terms of auction. Credit Cards include Visa and Mastercard only. REVIEWING YOUR BIDS: During an auction you can check the status of your bids at anytime. Note that no bids can be withdrawn after the auction for any reason. All items are sold as is, where is, with all faults. BIDDING NOTIFICATIONS: You can choose to be notified by e-mail during the auction if you have been outbid. Please note that outbid notifications are NOT sent out during the last two hours of the sale. WINNING NOTIFICATION & INVOICING: All winning bidders will receive an e-mailed invoice the morning after the auction closes. PICKUPS & REMOVALS: Dates and times for pickup will be posted on our website. We do not ship. Do not bid if you are unable to have your items picked up. Any item not picked up during the posted pickup times will be considered an abandoned item. Items are sold as is, where is, with all faults. If you abandon an item, your credit card will be charged for the purchase price of the item plus the cost to remove, transport and dispose the item. CONDITIONS OF ITEMS SOLD & OUR ONLINE CATALOGUE: Our best efforts are made to represent all items accurately in descriptions and photographs; however, all items are ultimately sold on an 'as is, where is' basis, with all faults. We strongly encourage all bidders to personally verify the condition of each item during the scheduled preview times. No responsibility is assumed by Rapid Sell or the seller for any errors or omissions. CLAIMS: No claims regarding goods purchased will be allowed. Bidders are reminded that all goods are sold on an 'as is, where is' basis, with all faults. PERSONAL & PROPERTY RISKS: We will not be liable for damage or injury to individuals or their property. ADDITIONS & DELETIONS: We reserve the right to remove and/or add lots and/or items to the sale at any point during the auction. BUYERS: The BUYER expressly agrees to indemnify and save Rapid Sell, the Seller and their assigns harmless from and against all claims, losses, expenses, damage or liability, directly or indirectly caused by or resulting from an act, including the negligent acts or omissions of Rapid Sell, or anyone acting in his/her behalf in connection with or arising out of auction. All bidders/buyers must be of legal age. RESERVE: Seldom are items sold with Reserve. If an item is being sold with a reserve, it will be clearly marked and identified. For items sold with a 'reserve', you will be required to pay a minimum amount in order to win the item. AUCTION RECORDS: In the unlikely event of a dispute, you agree to accept as true the information that we have in our records. SOFT CLOSE: Items close at regular intervals. To prevent a bidder from 'sniping', all bids made in the last minute of the auction will force an item to stay open for an additional 3 minutes. This will continue until all bidding has ceased. Most of our auction lots close in 10 second intervals. In other words, if an auction has 100 lots and is scheduled to close at 9:00 p.m., the first lot will close at 9:00 pm (soft close in effect) while the 100th lot will close at approx. 9:16 p.m. (soft close in effect). STRATEGY: We recommend that ALL BIDDERS put in their maximum bid when placing a bid online. This does not mean you will have to pay the amount you bid; you only pay one bid more than the next highest bid, and only up to your maximum bid. The software system will play out the bids as you would at a live auction and only uses the funds required to beat out the under-bidder at the prescribed bid increment. CATALOGUE ERRORS & OMISSIONS: If a description does not match a picture in a lot, the description takes precedence. All items are sold on an 'as is, where is' basis, with all faults. By bidding you are acknowledging agreement with the terms above.Do not bid unless you agree to all of these terms.
This surplus equipment auction includes items for the contractor, farmer and the DIYer. Items include power and hand tools, hardware and organizers, air compressors, shelving units, a 20 ton shop press, a parts washer and a 1998 pickup truck with plow. There's also walnut lumber, antique window frames, tires, an Old Timer wood stove, farm gates and much more. Over 375+ lots!

1
1998 Chevrolet Silverado 4x4 & Western Plow
- ran when parked in 2020 - suspected fuel line needs to be replaced to run (also since had a mouse infestation in cab) - Western Unimount 90" 3 way snow plow - power seats, power mirrors, power windows - 254,000km - 350 Vortec - a truck that has an...

1
Auction Info - Please Read
Bidding Opens: Sunday February 20th, 2022 at 12:00 noon Bidding Begins to Close: Thursday February 24th, 2022 at 8:00 pm (soft close in effect) Preview Date/Time: Wednesday, February 23rd, 2022 from 1:00 pm - 4:00 pm at 7814 Hwy, 7, Guelph by sche...

1
Sprayer on Wagon
- sprayer mounted on wagon - 200 gallon tank - approx. 40' boom length - includes spare parts and pressure monitor - soap marker also included

2
Dynablast Hot Water Heater Module
- model MHG400P - 300 GPH, 3,000 PSI, 200ºF temp - propane powered, 350,000 input BTU - to be picked up during last hour of scheduled pickup time frame

3
Pressure Washer
- 5hp, 230V, 2000 PSI - model 415PWS - Baldor motor, General Pump model T1321 - comes with hose, wand and reel as pictured - use with lot #002 for effective cleaning

4
CAI Air Compressor
- model KC5-80V-1 - with WEG 5hp 208-230V motor - tested and working- a real shop workhorse - to be unhooked at end of hose -to be picked up during last hour of scheduled pickup time frame

5
Husky Tool Chest
- 41" w x 17 1/2" d x 63" h - 8 upper section separates from lower half - upper section houses 8 drawers and pop up lid - lower section houses 11 drawers and pull out bench - lower right drawer is off tracks - on 5" casters

6
20 Ton Shop Press
- 23 1/2" w x 57 1/2" h - hydraulic press

7
40 Gallon Parts Washer
- 31" x 21" x 34" - model PW20 - responds to power but fluid coming from nozzle ** buyer to empty washer of fluid at pick up

8
Titan Airless Sprayer XT330
- responds to power - comes with new spray gun and new intake screen - owner's manual and spare parts included

9
Hardware Rack with Contents
- 37" w x 20" d x 49" h - steel construction with plastic bins - all contents included - most hardware is new and galvanized or zinc coated - various hardware from 8" leg bolts to deck screws - very good value in this lot

10
Hitachi C10FS Compound Saw
- 10" slide compound saw - tested and working - brand new 10" Diablo blade installed - also includes Hitachi UU 610 Universal Work Station, aluminum construction, 54" wide with adjustable width work rests x 34" tall

11
Milwaukee Heavy Duty Polisher
- variable speed - 7"/9" diameter - tested and working

12
Milwaukee Scope Camera
- approx. 38" scope length - tested and working - comes with 1 M12 battery pack and charger - adjustable light and zoom functions

13
Milwaukee Heavy Duty Orbital Super Sawzall
- tested and working - adjustable speed - adjustable handle rotation 360º - 9" long blade

14
Milwaukee 7 1/4" Circular Saw
- tested and working - Tilt-Lok adjustable handle

15
Mastercraft Floor Nailer
- drives 1 1/2" - 2" and T and L cleat nails - operates with 90-120 PSI - 60 staples or 120 cleat nail capacity - appears lightly used

16
RotoZip by Bosch
- model RZ10 - tested and working - with RotoZip ZM² attachment - 3.5" silicone/carbide blade

17
Mastercraft Cordless Inpact Driver
- 10.8V - tested and working - includes 2 batteries and charger

18
Milwaukee 1/2" Drill
- no battery - comes with M18 charger and tool bag

19
Milwaukee Heavy Duty Electric Shear and Light
- 18 Ga Mdoel 6852-20 - tested and working - comes with Milwaukee V28 work light - no battery with work light - comes with M18 battery charger - comes with tool bag

20
Stanley Black Socket Set
- 3/8" and 1/4" drive wrenches - metric and imperial sockets - missing 5mm socket

21
Weller Solder Gun
- model D550 - 260/200 watts - responds to power

22
RotoZip Tools by Bosch
- model RTM01 Rotomite - model DR1 - both tested and working - comes with 5 drywall zip bits

23
Sheet Metal Hammers and Dolly Set
- 3 sheet metal hammers - 4 dollies - case is broken

24
Bostitch Air Nailer
- comes with magazine of framing nails

25
Freud Orbital Jigsaw
- FJ85 - tested and working - owner's manual included

26
Mastercraft Maximum Socket Set
- 1/2", 3/8", 1/4" drive wrenches - metric and imperial sockets - Torx bits - metric and imperail allen key sets - missing 3 impact driver bits - case has broken latches

27
Husky Socket Set
- 3/8" drive - missing 1 extension

28
Paslode Floor Nailer
- model 3150/38 N18 air nailer - 120 PSI max - uses 1/2" - 1 1/2" staples - comes with wood case

29
Mastercraft Wet Sharpener
- model 55-3504-4 - tested and working - motor is noisy

30
Paslode 30° Cordless Framing Nailer
- model IMLi325 - uses 2" x .113mm to 3 1/4" x .131mm nails - can use 7.4 volt battery pack included or orange quicklode fuel cartridge - owner's manual included - charger not included

31
Paslode Finish Nailer
- model IMLi200 - 18 Ga - uses battery or fuel cell (both included) - uses 18 gauge, straight brads fasteners - includes battery charger

32
Paslode Brad Nailer
- model IM200F18 - uses battery or fuel cell to operate - 3 batteries and charger included - uses 18 gauge straight brad fasteners

33
Glue Gun and Heat Gun
- both tested and working - comes with package of 7 glue sticks

34
3.5 RAE Bench Vise
- 3.5" jaw - made in Canada - nice little vise!

35
Stinger Wet/Dry Vac
- model WD20250 - 4 amp motor - tested and working - nice, compact size

36
3 Work Lights
- 2 halogen lights, 1 LED - both halogen lights do not work - LED light works - comes with milk crate

37
Bucket of Screwdrivers
- various types and conditions - approx. 47 plus 1 hammerhead

38
Assorted Adjustable Wrenches
- 12 in total - sizes from 1/2" to 1 1/2" jaws

39
Delta Bench Grinder
- model 23-640C - 6" grinders - tested and working

40
More Screwdrivers!
- approx. 35 screwdrivers - various types and sizes

41
Even More Screwdrivers!
- approx. 35 screwdrivers - various types and sizes

42
Pliers and Vise Grips
- 3 needlenose, 3 vise grips - 2 side cutters, 1 pair of snips - 3 adjustable, 1 wire stripper - 1 small 3" clamp

43
Tool Bucket Organizer
- includes assortment of approx. 20 screwdrivers - 1 adjustable wrench - 3 allen keys - pliers and chisels

44
Assortment of Scrapers & Spatulas
- 7 scrapers of various types - 3 spatulas - 1 brush

45
Assortment of Saws
- hack saw, coping saw - flush cut saw - 2 other wood saws

46
Files and Gecko Gauges
- 7 various files - plus file cleaning brush - plus 1 adjustable clamp - Gecko gauges for siding installation

47
Remington Powder Tools
- 2 tools - comes with 4 partial boxes of cartridges

48
Marples Wood Working Tools
- 7 wood lathe tools - see photos for condition - all appear sharp - some have been re-sharpened

49
Shop Helpers Assortment
- trouble light, working with extra bulb - tape measures, chalk line, Inspection mirror - 2 magnetic trays, infrared thermometer (needs batteries) - glass cutter, Pyrex measuring cup - etc....a great lot!

50
Solid Work Bench
- steel frame - 3/4" plywood top - 8' long x 3' 2" wide x 46" tall at back shelf - 2" square steel frame with lower shelf ** does NOT included contents in or around bench ** please schedule a late pickup time for this lot

51
Pop Rivet Kit and Screw Bits
- 4 pop rivet hand tools with assorted rivets - Flambeau tackle box with nice assortment of drill bits and impact drivers - note damage on both toolbox and tackle box

52
Plumbing Kit
- fantastic assortment of plumbing tools for the DIY-er - 4 propane cylinders partly used - assortment of solder and flux - ABS glues - brass and copper fittings - pipe flanges, pipe cutters, steel brushes, torches, etc.

53
Assorted Drill Bits
- approx. 75 drill bits - various sizes, types and conditions - 8 spade bits - 1 x 23 1/2" concrete bit

54
9 1/2" anvil
- 9 1/2" long x 4 1/2" tall - no manufacturer markings

55
Record Bolt Cutters
- nice large set of bolt cutters - Record model 936 - measures 36" tip to tip - jaws appear in nice shape

56
24" Bolt Cutters and Pruning Snips
- 24" bolt cutters - jaws appear in good condition - pruning shears are broken but fixable with new hardware

57
Oilers and Funnels and Hose
- 3 oilers, 3 funnels - 1 jug, 2 x oil siphons - approx. 3' of 3/8" rubber fuel line - various brass fittings

58
Grease Guns
- 2 x 11" grease guns - silver has flex hose - both loaded with grease

59
Assorted Saw Blades and Grinding Wheels
- 1 x 12" wood saw blade, used but has plenty of life left - 6 x 7" saw blades, used with life left - 3 x 12" metal chop saw blades, 1 lightly used, other 2 are in new condition - 1 x 10" Diamond blade, used with life left - 18 x new in package cut-o...

60
Air Pig
- 7 gallon - with hose and tire inflator - note: gauge on tank is broken

61
Air Tools
- 3/8" air ratchet - air drill with forward and reverse - Campbell Hausfeld air hammer with chisel tip - ITC orbital air sander with velcro style pad - all NOT tested

62
More Air Tools
- 2 x air hammers - 1 x 3/8" air ratchet - includes 3 air hammer tips

63
Hammer Time!
- 3 air hammers; 2 Mastercraft and 1 Campbell Hausfeld (missing spring) - includes 9 tips

64
Air Hose
- approx. 40' of green air hose - approx. 25' of red air hose

65
Campbell Hausfeld Air Compressor
- 4 gallon, 125 PSI max - comes with adjustable regulator and filter - approx. 10' air hose with air chuck fitting - tested and working

66
Air Fittings Plus
- fantastic assortment of male and female fittings - brass couplers, air chucks, 4 air nozzles, thread tape - fittings are mostly 1/4"

67
Mastercraft Maximum Socket Set #1
- metric and imperial - 3/8" drive 6pt deep sockets - 3/8" drive 6pt shallow sockets - 1/4" drive 6pt deep sockets - Torx and allen bits included in this set - missing bits: No. 4 allen, 9/16" shallow socket, 3/8" deep socket, 8mm shallow socket, 13...

68
Mastercraft Maximum Socket Set #2
- 3/8" and 1/2" drive 12pt shallow sockets - metric and imperial - 4 spark plug sockets - 4 x 1/2" drive extensions - 1 x 1/4" drive extension 1/2", 3/8" 1/4" drive wrenches (note: 3/8" wrench is different brand) - missing bits: 9/16", 5/16", 11/3...

69
Mastercraft Maximum Socket Set #3
- metric and imperial - 1/2" drive deep sockets (6pt) - 1/2" drive shallow sockets (6pt) - 3/8" drive shallow sockets (6pt) - a complete set

70
Coffee Can of Sockets Pt. 1
- assorted sizes and types - largest is 32mm and 1 1/4" - smallest is 3/8" - approx. 50 sockets

71
Coffee Can of Sockets Pt. 2
- assorted sizes and types - 3 swivel sockets - assortment of 3/8" drive torx bits and allen bits - largest socket 1 1/4" and 24mm - smallest socket 3/8" and 8mm - approx. 64 sockets

72
Socket Organizers! (And Others!)
- would be handy to have for lots 70 or 71! - each labeled for metric and imperial sizes - larger organizers are for 1/2" drive - smaller organizers are for 1/4" drive

73
Metric & Imperial Combination Wrenches
- Mastercraft wrenches - imperial missing 1/2" and 9 1/6" - metric missing 8mm

74
Wrenches and Extensions
- 3 x breaker bars, 1/2", 3/8" and 1/4" - 11 x extensions, longest is 10" - 2 x 1/2" drive Mastercraft wrenches

75
Stubby Wrenches
- metric and imperial - 10 metrics from 7mm to 22mm (missing 13mm, 16mm, 17mm, 20mm, 21mm) - 11 imperial wrenches, complete set from 1/4" to 7/8"

76
Mastercraft Wrenches Pt. 1
- mostly Mastercraft Maximim - larger imperial and metric sizes - imperial complete from 11/16" to 1" size (6 total) - metric omplete from 6mm to 24mm (15 total), missing 15mm, 20mm, 21mm and 23mm)

77
Mastercraft Wrenches Pt. 2
- mostly Mastercraft Maximum - from 1/4" to 1 1/8" - multiple duplicates of 1/4", 3/8" and 11/32" sizes - 19 wrenches total

78
Mastercraft Wrenches Pt. 3
- mostly Mastercraft Maximum - metric and imperial - metric from 6mm to 24mm (see photos for sizes) - note some metrics are tube wrenches - larger imperial sizes from 11/16" to 1" - 18 wrenches in total

79
Last of the Wrenches
- mostly Mastercraft wrenches - from 1/4" to 1 1/16" - see photos for size inclusions - 18 wrenches in total

80
Hammers & Punches (& Hatchets Too!)
- 11 steel punches - 7 brass punches - assorted hammers - 2 hatchets

81
Cut and Repair
- great assortment of exacto knives and replacement blades - sharpening stone and 3 scrapers included - tire and vinyl repair kit - includes vinyl patches, tire plugs, vinyl/rubber glue - includes repair tools as well!

82
3/4" Drive Socket Set
- 15 sockets from 7/8" to 2" - missing 1 1/2" socket - includes break bar, extensions and 1/2" drive to 3/4" adapter

83
Ignition Service and Compression Tester
- feeler gauges - spark plug wire testers - ignition wrench set - 2 x new NGK BR8ECS plugs - compression tester with adapters and manual

84
Oil Filter Wrenches and Allen Key Sets
- 5 oil filter wrenches - assortment of metric and SAE allen key sets - also includes Fram PH3675 oil filter and CNH 84299977 fuel filter

85
Automotive Electrical
- various lengths of wire and wire loom - 12V plugs, lights, toggle switches - 2 sets of booster cables - battery terminal lugs - great value in this lot!

86
Wall Mounted Battery Charger Plus
- charges 12V at 2 amps - also includes 100W 12V power inverter - also incudes 120V 200W magnet heater - also includes 2 x inline coolant heaters

87
Brake Line Repair Kit
- Westward Flair Kit complete - brake line bender - extra flare bits and flare presses - extra tube cutters and de-bur tool - approx. 6' 3/16" brake line - approx. 10' 5/16" brake line

88
Puller and Spreader
- power built puller with 4" max jaw - 2 x spreader kits

89
Misc. From Around the Shop
- 2 x For Sale signs - 1 x IH Sign (reproduction) - Garmin GPS - small aluminum clipboard with storage - McCormick W-10 tractor model (needs repair) - Crossman air pistol - see photos for the rest

90
2 Ton Jack Stands
- 3 jack stands - 10 1/2" at lowest, 17 1/2" at tallest

91
Aluminum Jack Stands and Bottle Jacks
- 2 x 3 ton aluminum jack stands - 10" at lowest, 15 1/2" at highest - 1 x 20 ton bottle jack - 1 x 2 ton bottle jack - both jacks working

92
3 Heavy Duty Jack Stands
- unknown capacity - 15" height at lowest, 25" at tallest

93
Roller Support Stand and Pipe Clamps
- Jobmate roller stand, adjustable from 27" to 44" high - 132lb capacity - 2 pipe clamps, approx. 24" long

94
Contractor Lighting
- 10 sockets total - approx. 10' between each socket - 150 watt max per socket - tested and working

95
Lincoln Electric and Shop Misc.
- dial missing from side of helmet - auto darkening function, does not seem to work - submersible electric pump, responds to power - Dremel engraver, working - Black & Decker corded drill, working - Proctor Silex 4 slice toaster, untested - Noma ligh...

96
Sandpaper Lot
- new pack of 20 sheet 3M 220 grit - 2 new 80 grit 4" wide belts - large roll of 240 grit emery cloth, approx. 35" wide - large roll of 120 grit sandpaper, 3.5" wide - 5" diam. palm sander

97
Delphi Blower Fan
- belt driven - tested and driven - approx. 12" drum fan

98
Misc. Trailer Electrical
- 2 x 7 pin male ends - 4 female 5/7 pin ends - new 4 pin wiring kit with 60" wiring - new T-connector kit - 2 x 5 pin to 4 pin flat adapter plugs - 1 x 7 pin wiring tester

99
Plastic Drawer Organizers
- 12" wide x 14" tall x 6 1/2" deep - mostly empty - remaining contents included

100
Concrete Trowel Groover
- new - 24" x 8" - Kraft Tool Co. Airplane Groover

101
Hardware Organizer #1
- 11 1/2" x 9" x 5" - all contents included - includes 2 other organizers with contents - plastic construction

102
Hardware Organizer #2
- 12" x 16 1/2" x 5 3/4" - Holt brand - missing 2 drawers, all contents included - tin construction - includes UEI Co. detector for multimeter, untested

103
Foam & Tar Gasket Strips
- approx. 20' of 4" wide foam weather strip - approx. 20' of 5 1/2" wide yellow foam weather strip - new pack of 3/16" x 3/8" x 16' 4" of weather strip - 7 rolls of tar gasket strips, 25' per roll - approx. 7' of 1" foam weather strip

104
Coffee Cans of Hardware
- loads of hardware! - box of 3 1/2" nails - wood screws, machine screws, plastic anchors, etc. - 3 x GM cargo tie downs (new) - approx. 40lbs of hardware

105
More Hardware
- 4 plastic trays with various contents - partial box of 2" rivets - nuts, bolts, glazier points, box of gear clamps, etc. - U-bolts and 3 1/2" exhaust clamps - various pens/markers/soap stones, etc.

106
Candle Lanterns and Space Heater
- 2 x tin lanterns, 11" tall x 5" square - small space heater, tested and working - also approx. 50 x 11" zip ties - large roll of 'Caution' tape

107
3 Adjustable Floor Scrapers
- 8" Razor jaw - adjusts from 38" to 56" - all require new blades

108
Fire Safety
- 1 x refillable water loaded extinguisher, recharges with air compressor, approx. 24" tall - 1 x smaller ABC extinguisher with good charge, approx. 12" tall

109
Painter's Lot
- approx. 4.78L of Varsol - 2 new rolls of Ram Board seam tape - partial roll of green painter's tape - 7 new disposable paint trays - 1 new set of disposable coveralls - 7 rub stones - 2 partially used chalkline refills

110
Quikrete Lot
- approx. 4.78L of concrete bonding adhesive - approx. 1.5L of acrylic fortifier - approx. 0.5L of patching compound - 2 partially used tubs of water plug (.75kg approx.) - approx. 30lb of Quikrete multipurpose sand - 2 containers of chalkline refill

111
Polar Blox Snow Guards
- used on steel roofs to stop snow slides - all new - 15 Polar Blox - guards are 5" w x 3" tall

112
Steel Roofing Hardware
- dark grey coloured screw heads - approx. 150 screws - 2" long

113
Heavy Duty Casters
- 6 in total - 4 swivel, 2 fixed - 5" caster wheels - swivel casters are locking - all appear new

114
Forced Air Propane Heater
- 150,000 BTU - on/off function (no thermostat) - in working order

115
Roof Jacks
- 5 in total, 4 appear new - yellow holds 2" x 6" at 60º - red holds 2" x 8" at 60º

116
Heavy Duty 100' Extension Cord
- 10 gauge cord, 15 amp, 125V - appears in good shape - no noticeable cuts or damages

117
Tile and Grout Lot
- approx. 1L primer for self leveling compounds - 59 white 7.5cm x 30cm subway tile in boxes - 2 unopened bags of Mapei grout (white & grey) - 4 partial bags of Mapei grout (3 white, 1 chocolate) - container of approx. 35 tile spacers

118
Extension Cords That Need Help
- orange is 10 gauge, approx. 25', needs new female end - black is approx. 25', needs new female end

119
Nail Gun Hardware
- 27 spools of 1 1/4" x .120 roofing nails - 7 spools of 3 1/4" x .120 framing nails - 4 partial spools of framing nails - 2 partial spools of 2 3/4" roofing nails

120
All Purpose Screws
- approx. 750-1000 screws in this lot - #8's x 3" - yellow zinc coated