MACHINE SHOP & METAL WORKING EQUIPMENT
Listing ID#: 1292645

Auction Location
1213 KENNEDY BOULEVARD - MANVILLE NJ 08835
Auction Dates and TimesSALE IS COMPLETED
Bidding Starts: Thursday May 20, 08:00 AM
Bidding Ends: Wednesday May 26, 12:00 PM
Auction Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
Peter Costanzo Auctioneers

Website: www.petercostanzoauctioneers.com

GoToAuction.com ID#: 4245
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions

ONLINE BIDDING TERMS

MACHINE SHOP EQUIPMENT

AUCTION DATE: MAY 20, 2021 TO MAY 26, 2021

1. The Auctioneers Group has put forth every effort in preparing the catalog for this auction to provide accurate descriptions of all items.  All property is sold “as-is” and it is the buyer’s responsibility to determine the exact condition of each item.  Printed statements or descriptions by staff are provided in good faith and are matters of opinion.  All sales are FINAL and there are absolutely NO refunds.

2. If you are interested in participating in our online auctions you must REGISTER ONLINE & REQUEST TO BID. Please provide an accurate phone number and email address upon registering. In order to complete your online registration and be approved to be bid, NJ bidders are required to post a $500.00 authorized hold deposit, Out-of-State bidders are required to post a $1,000.00 authorized hold deposit & International bidders are required to post a $10,000.00 authorized hold deposit. Please click here for online credit card authorization form. Once we receive the form back, we will call you to place the hold.  Failure to comply with the stated terms will result in a default and your deposit will be retained as liquidated damages.  (PLEASE NOTE: IN AN ADDITIONAL HOLD DEPSOIT MAY BE REQUIRED WHEN A PURCHASERS BIDS EXCEED $5,000.00. THE DEPOSIT IS AN AUTHORIZED HOLD ONLY.  YOUR CREDIT CARD WILL NOT BE CHARGED AT THIS TIME. IF YOU ARE NOT A WINNING BIDDER, THE MONEY WILL BE RELEASED FROM THE HOLD WITHIN APPROXIMATELY 24 HOURS OF THE CLOSE OF SALE). 

3. Please allow up to 24 hours for approval/authorization to be complete.  All persons requesting to bid MUST complete the registration process one hour prior to the close of auction (Wednesday May 26, 2021 by 12 Noon, EST).  Bid requests that are received after this time may not be approved.

4. In order to better serve our customers, all bidders must provide their name, address, daytime phone number, and email address where they can be contacted in order to assure good contact between The Auctioneers Group and the bidder throughout any transactions.

5. By registering to bid, all persons acknowledge to have full knowledge of these “Terms and Conditions of Sale” and agree to be bound thereby.

6. Bidding will open on Thursday May 20, 2021 at 9:00 AM and lots will start closing on Wednesday May 26, 2021 at 1:00 PM.  TWO lots will close every 1-minute beginning with Lot Number 1.

7. Bid Extension: The closing of a lot is automatically extended 3 minutes whenever a bid is placed during the last 3 minutes of the items closing time.

8. On-site Previews will be held on Thursday May 20th & Tuesday May 25th from 11:00 AM to 3:00 PM.  All previews will be held on premises at 1213 Kennedy Boulevard in Manville, NJ 08835.  Masks Required. Catalogs available on-site. 

9. BUYERS PREMIUM: There is a 18% Buyer’s Premium added to the final bid price. 

10. SALES TAX: This sale is NOT subject to State Sales Tax, EXCEPT for vehicles.  Vehicles will be subject to tax when registered.

11. PAYMENT: Wire transfers and bank checks are the preferred methods of payments.  Credit cards will also be accepted (there is a 3% fee for using credit cards).  You will be emailed an invoice that will include wire transfer instructions to complete payment.  If wire transfers or other forms of payment are not received by 4PM EST THURSDAY MAY 27, 2021, credit cards used for the credit card authorization forms provided for registration approval may be charged the full amount of the purchase.

12. REMOVAL/PICK-UP: PURCHASERS MUST REMOVE THE MERCHANDISE FROM THE PREMISES AT THEIR OWN RISK & LIABILTY.  The Auctioneers Group DOES NOT provide any shipping.  Merchandise is located at and must be picked up on premises located at 1213 Kennedy Boulevard in Manville, NJ 08835. All purchases are made at the purchaser’s risk and the auctioneer is not responsible if all or any part is lost, stolen, damaged or destroyed from any cause.  Auctioneer shall not be liable for non-delivery to the purchaser of any lots.  Shipping arrangements and cost are the BUYER’S SOLE RESPONSIBILITY. Removal and rigging are to be at the purchaser’s own expense, risk, and liability. All rigging and delivery arrangements are strictly the responsibility of the purchaser and rigging company. The Auctioneers Group takes no responsibility for these arrangements whatsoever. Rigging companies are required to provide a copy of their liability insurance to The Auctioneers Group.

13. REMOVAL PICK UP DATES & TIMES: Purchasers must schedule removal of items with The Auctioneers Group. Removal days and times for SMALLER ITEMS will be Thursday May 27th between 10AM and 3PM & Friday May 28th between 9AM and 12PM EST.  Removal of LARGER ITEMS will be by appointment only on Tuesday & Wednesday June 1st & 2nd from 10AM to 3PM, please call auction company to schedule pick-up.  All items must be picked up by Wednesday June 2, 2021.  NO REMOVAL SATURDAY, SUNDAY, OR MONDAY (MAY 29TH-31ST).   

14. In the event of a billing error the buyer is obligated to pay any deficiency upon presentation of a corrected bill.

15. Auctioneer reserves the right to resolve any dispute regarding bids or bidders.

16. Record of the sale is being kept by the auctioneer & bookkeeper and will be taken as final in the event of any dispute.

17. THIS LISTING IS ONLY A GUIDE AND ACCURACY IS NOT GUARANTEED.  EVERY ITEM WILL SELL “AS IS” “WHERE IS”.  PLEASE INSPECT INVENTORY & EQUIPMENT PRIOR TO BIDDING.  ALL SALES ARE FINAL.  No sale shall be invalidated by reason of any defect or inaccuracy in any of the lots by reason of their being incorrectly described in this listing or elsewhere and no liability shall be borne by the Auctioneers in respect of any such fault or errors.  These listings have been prepared only as a guide based on information from sources generally believed to be reliable and from the Consignor, but the accuracy thereof cannot be guaranteed or warranted by the Auctioneers.  Bidder acknowledges that it is their responsibility to inspect all equipment and to make his own inquires. There shall be no guarantees or warranties, expressed or implied, statutory or otherwise, of any nature whatsoever.  Each and every lot will be sold “as is” “where is”.  Specifically, but not to restrict the generality of the foregoing, the Auctioneers make no representation or warranty on any of the lots which are the subject of the auction. 

18. The auction company reserves the right to refuse any bid or bidder. The auction company is not obligated to approve all bidder registration requests.

19. USE OF SITE: The Auctioneers Group cannot and will not be held responsible for any interruption in service, errors, and/or omissions caused by any means and does not guarantee continuous, uninterrupted service or use of the site.  Bidder acknowledges that this auction is conducted electronically and relies on hardware and software that may malfunction without warning.  The Auctioneers Group, in its sole discretion, may void any sale, temporarily suspend bidding and re-sell any item/lots that were affected by any malfunction.  

20. PURCHASER COMPLIANCE: If the purchaser fails to comply with any of the stated and printed “Terms and Conditions of Sale” included but not limited to full payment, method of payment and removal of purchased goods, the auctioneer at his option may declare the purchaser in default and retain all monies paid as liquidated damages and pursue legal remedies available for enforcement of purchaser’s performance or to recover losses caused by purchaser’s default.  These losses include, but are not limited to, restocking, moving, storage and any and all expenses related to the reselling of the goods and any loss on any subsequent sale.

 

SALE MANAGED & CONDUCTED BY

 

THE AUCTIONEERS GROUP

(609) 693-6899 / (732) 776-7222

www.theauctioneersgroup.com

 

 


Listing Information

1
LOT ASSORTED MACHINIST HAND TOOLS

2
8" KURT VICE

3
CARBIDE TIPPED TOOL BITS

4
SLITTING SAWS AND CUTTERS

5
ARBORS AND SOME CUTTERS ATTACHED

6
LOT OF ASST. CUTTERS

7
WALL OF ASSORTED CUTTERS AND HAND TOOLS

8
MILWAUKEE BENCH GRINDER

9
LOT ASST COUNTERSINK AND CENTER DRILLS

10
SET OF LOCKABLE PARREL DIFFERENT HEIGHTS

11
ASST. BROACHES

12
ASST. BOARING TOOLS

13
ASST. FRACTIONAL AND NUMBER DRILLS

14
ASST. LARGE DRILL BITS

15
LOT. ASST. DRILL BITS AND TOOL BOX (5PCS)

16
LOT ASST. DRILL BITS AND CHUCKS

17
WALTON BENCH VICE

18
GRANITE PLATE

19
ASST. CLAMPS

20
ASST. C CLAMPS

21
DOALL HEIGHT MICROMETER

22
LOT SIGN BAR SET WITH EXTRA SIGN, DIFFERENT ANGLES

23
ADJUSTABLE PARALLELS, DIFFERENT SIZES

24
SET OF GROUND ANGLE PARALLEL BLOCKS

25
LOT ASSORTED FILES

26
LOT OF V BLOCK CLAMPS

27
LOT ASST. TAPS

28
LOT ASST. TAPS

29
LOT ASST. TAPS & 2 TAP HANDLES/WRENCHES

30
LOT ASST. DIES

31
LOT ASST. TAPS

32
BROWN & SHARP PRECISION CENTER V BLOCKS

33
LOT ASST. REAMERS

34
STOP BLOCK

35
ASST. END MILLS

36
SET OF CLARK ADJUSTABLE WHOLE CUTTERS

37
GRINDING WHEEL DRESSER

38
DIVINING HEAD W/PLATES

39
RADIUS CUTTERS

40
LOT OF BOARING HEADS

41
EMIL WOHLHAUPTER BOARING HEAD

42
SPIN JIG

43
ASST. V BLOCKS

44
ASST. SIZES LETTER & NUMBER PUNCHES
3/32, 1/8, 3/16, 1/4

45
ASST. FLY CUTTERS

46
LIVE CENTER

47
DANLY GRANITE BLOCK

48
HEIGHT GAUGES & INSPECTION INDICATOR ON GRANITE BLOCK

49
LOT ASST. GRINDING WHEELS ON WALL

50
ACETAYLENE TORCH SET

51
DEMANGNETIZER

52
ARBOR PRESS

53
TML BY HARIG GRINDER

54
TML NEW BRITAIN GRINDER

55
LOT OF (2) TOOL BOXES
(1) WOODEN & (1) METAL

56
HORIZONTAL VERTICAL CHUCK ACCESSORY FOR BRIDGEPORT

57
BRIDGEPORT MILLING MACHINE

58
BRIDGEPORT MILLING MACHINE

59
BRIDGEPORT TEXTRON BTC 1
(DOES NOT WORK)

60
CLAUSING DRILL PRESS
(Needs Motor)

61
DELTA ROCKWELL DRILL PRESS
(Needs Motor)

62
MECHANICS CORI I
(Made in Italy, Not Wired for USA. Operation Unknown)

63
MORI SEIKI 15 CNC MACHINE SL
Needs Onboard Computer

64
THRIFTY BAR 4' BAR FEEDER

65
BAM CUTOFF SAW

66
ZEH AND HAHNEMANN CO PRESS

67
MANUAL FORKLIFT

68
40 TON HYDRAULIC PRESS

69
PRESS

70
BRIDGEPORT PORT TORO CUT TC2G CNC MACHINE

71
LOT OF ASST. SCRAP MATERIAL
ALUMINUM, 316 STAINLESS STEEL & 1018 KOTO STEEL

72
ELECTRIC FILING MACHINE

73
DUNLAP BENCH GRINDER

74
POLISHING GRINDER

75
BENCH GRINDER

76
HORIZONTAL VERTICAL COLLET INDEXER

77
SMALL RUMBLE VIBE

78
SHEET METAL CUTTER

79
METAL ENGRAVER

80
AIR PRESS

81
SMALL PRESS

82
SMALL PRESS

83
GRANITE PLATE

84
CLAUSING 15" LATHE
(Physical Length 8.5 Feet)

85
CLAUSING 17" LATHE
(Physical Length 11.5 Feet)

86
35" x 78" x 21" LYON METAL 2 DOOR LOCKING CABINET
Contents NOT Included

87
35" x 78" x 21" LYON METAL 2 DOOR LOCKING CABINET
Contents NOT Included

88
35" x 78" x 21" LYON METAL 2 DOOR LOCKING CABINET
Contents NOT Included

89
35" x 78" x 21" LYON METAL 2 DOOR LOCKING CABINET
Contents NOT Included

90
LOT ASST. COLLETS

91
METAL 3 TIER LAWYER STYLE BOOKCASE
ART METAL BRAND

92
LOT. ASST. INSPECTION TOOLS

93
VERMONT INSPECTION GUAGR PINS STARTING AT .061 TO .5005

94
RED HEAD HAMMER DRILL

95
GAUGE BLOCK SET

96
LITTLE GIANT JUNIOR 2 PC ADJUSTABLE DIE SCREW PLATE WITH GENUINE DIES

97
DRILLS, TAPS, AND DIES. FULL SET W/WRENCHES

98
REEMER SET (2 PCS.)

99
REPLACEMENT TORCH PARTS

100
OIL FILTER/EXCELON REGULATOR

101
36" x 72" x 18" 2 DOOR METAL CABINET

102
1 LOT OF ASSORTED ENDMILLS

103
ACORN DIE HOLDER

104
1 LOT OF WRENCHES AND SOCKETS

105
DESK

106
DESK

107
DESK

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Sponsored Links

MACHINE SHOP & METAL WORKING EQUIPMENT

Peter Costanzo Auctioneers

Peter Costanzo Auctioneers


Contact:
Phone:
Sale Location
1213 KENNEDY BOULEVARD - MANVILLE
Manville, NJ 08835
Sale Dates and Times
Sale Terms and Conditions

ONLINE BIDDING TERMS

MACHINE SHOP EQUIPMENT

AUCTION DATE: MAY 20, 2021 TO MAY 26, 2021

1. The Auctioneers Group has put forth every effort in preparing the catalog for this auction to provide accurate descriptions of all items.  All property is sold “as-is” and it is the buyer’s responsibility to determine the exact condition of each item.  Printed statements or descriptions by staff are provided in good faith and are matters of opinion.  All sales are FINAL and there are absolutely NO refunds.

2. If you are interested in participating in our online auctions you must REGISTER ONLINE & REQUEST TO BID. Please provide an accurate phone number and email address upon registering. In order to complete your online registration and be approved to be bid, NJ bidders are required to post a $500.00 authorized hold deposit, Out-of-State bidders are required to post a $1,000.00 authorized hold deposit & International bidders are required to post a $10,000.00 authorized hold deposit. Please click here for online credit card authorization form. Once we receive the form back, we will call you to place the hold.  Failure to comply with the stated terms will result in a default and your deposit will be retained as liquidated damages.  (PLEASE NOTE: IN AN ADDITIONAL HOLD DEPSOIT MAY BE REQUIRED WHEN A PURCHASERS BIDS EXCEED $5,000.00. THE DEPOSIT IS AN AUTHORIZED HOLD ONLY.  YOUR CREDIT CARD WILL NOT BE CHARGED AT THIS TIME. IF YOU ARE NOT A WINNING BIDDER, THE MONEY WILL BE RELEASED FROM THE HOLD WITHIN APPROXIMATELY 24 HOURS OF THE CLOSE OF SALE). 

3. Please allow up to 24 hours for approval/authorization to be complete.  All persons requesting to bid MUST complete the registration process one hour prior to the close of auction (Wednesday May 26, 2021 by 12 Noon, EST).  Bid requests that are received after this time may not be approved.

4. In order to better serve our customers, all bidders must provide their name, address, daytime phone number, and email address where they can be contacted in order to assure good contact between The Auctioneers Group and the bidder throughout any transactions.

5. By registering to bid, all persons acknowledge to have full knowledge of these “Terms and Conditions of Sale” and agree to be bound thereby.

6. Bidding will open on Thursday May 20, 2021 at 9:00 AM and lots will start closing on Wednesday May 26, 2021 at 1:00 PM.  TWO lots will close every 1-minute beginning with Lot Number 1.

7. Bid Extension: The closing of a lot is automatically extended 3 minutes whenever a bid is placed during the last 3 minutes of the items closing time.

8. On-site Previews will be held on Thursday May 20th & Tuesday May 25th from 11:00 AM to 3:00 PM.  All previews will be held on premises at 1213 Kennedy Boulevard in Manville, NJ 08835.  Masks Required. Catalogs available on-site. 

9. BUYERS PREMIUM: There is a 18% Buyer’s Premium added to the final bid price. 

10. SALES TAX: This sale is NOT subject to State Sales Tax, EXCEPT for vehicles.  Vehicles will be subject to tax when registered.

11. PAYMENT: Wire transfers and bank checks are the preferred methods of payments.  Credit cards will also be accepted (there is a 3% fee for using credit cards).  You will be emailed an invoice that will include wire transfer instructions to complete payment.  If wire transfers or other forms of payment are not received by 4PM EST THURSDAY MAY 27, 2021, credit cards used for the credit card authorization forms provided for registration approval may be charged the full amount of the purchase.

12. REMOVAL/PICK-UP: PURCHASERS MUST REMOVE THE MERCHANDISE FROM THE PREMISES AT THEIR OWN RISK & LIABILTY.  The Auctioneers Group DOES NOT provide any shipping.  Merchandise is located at and must be picked up on premises located at 1213 Kennedy Boulevard in Manville, NJ 08835. All purchases are made at the purchaser’s risk and the auctioneer is not responsible if all or any part is lost, stolen, damaged or destroyed from any cause.  Auctioneer shall not be liable for non-delivery to the purchaser of any lots.  Shipping arrangements and cost are the BUYER’S SOLE RESPONSIBILITY. Removal and rigging are to be at the purchaser’s own expense, risk, and liability. All rigging and delivery arrangements are strictly the responsibility of the purchaser and rigging company. The Auctioneers Group takes no responsibility for these arrangements whatsoever. Rigging companies are required to provide a copy of their liability insurance to The Auctioneers Group.

13. REMOVAL PICK UP DATES & TIMES: Purchasers must schedule removal of items with The Auctioneers Group. Removal days and times for SMALLER ITEMS will be Thursday May 27th between 10AM and 3PM & Friday May 28th between 9AM and 12PM EST.  Removal of LARGER ITEMS will be by appointment only on Tuesday & Wednesday June 1st & 2nd from 10AM to 3PM, please call auction company to schedule pick-up.  All items must be picked up by Wednesday June 2, 2021.  NO REMOVAL SATURDAY, SUNDAY, OR MONDAY (MAY 29TH-31ST).   

14. In the event of a billing error the buyer is obligated to pay any deficiency upon presentation of a corrected bill.

15. Auctioneer reserves the right to resolve any dispute regarding bids or bidders.

16. Record of the sale is being kept by the auctioneer & bookkeeper and will be taken as final in the event of any dispute.

17. THIS LISTING IS ONLY A GUIDE AND ACCURACY IS NOT GUARANTEED.  EVERY ITEM WILL SELL “AS IS” “WHERE IS”.  PLEASE INSPECT INVENTORY & EQUIPMENT PRIOR TO BIDDING.  ALL SALES ARE FINAL.  No sale shall be invalidated by reason of any defect or inaccuracy in any of the lots by reason of their being incorrectly described in this listing or elsewhere and no liability shall be borne by the Auctioneers in respect of any such fault or errors.  These listings have been prepared only as a guide based on information from sources generally believed to be reliable and from the Consignor, but the accuracy thereof cannot be guaranteed or warranted by the Auctioneers.  Bidder acknowledges that it is their responsibility to inspect all equipment and to make his own inquires. There shall be no guarantees or warranties, expressed or implied, statutory or otherwise, of any nature whatsoever.  Each and every lot will be sold “as is” “where is”.  Specifically, but not to restrict the generality of the foregoing, the Auctioneers make no representation or warranty on any of the lots which are the subject of the auction. 

18. The auction company reserves the right to refuse any bid or bidder. The auction company is not obligated to approve all bidder registration requests.

19. USE OF SITE: The Auctioneers Group cannot and will not be held responsible for any interruption in service, errors, and/or omissions caused by any means and does not guarantee continuous, uninterrupted service or use of the site.  Bidder acknowledges that this auction is conducted electronically and relies on hardware and software that may malfunction without warning.  The Auctioneers Group, in its sole discretion, may void any sale, temporarily suspend bidding and re-sell any item/lots that were affected by any malfunction.  

20. PURCHASER COMPLIANCE: If the purchaser fails to comply with any of the stated and printed “Terms and Conditions of Sale” included but not limited to full payment, method of payment and removal of purchased goods, the auctioneer at his option may declare the purchaser in default and retain all monies paid as liquidated damages and pursue legal remedies available for enforcement of purchaser’s performance or to recover losses caused by purchaser’s default.  These losses include, but are not limited to, restocking, moving, storage and any and all expenses related to the reselling of the goods and any loss on any subsequent sale.

 

SALE MANAGED & CONDUCTED BY

 

THE AUCTIONEERS GROUP

(609) 693-6899 / (732) 776-7222

www.theauctioneersgroup.com

 

 


Listing Details

1
LOT ASSORTED MACHINIST HAND TOOLS

2
8" KURT VICE

3
CARBIDE TIPPED TOOL BITS

4
SLITTING SAWS AND CUTTERS

5
ARBORS AND SOME CUTTERS ATTACHED

6
LOT OF ASST. CUTTERS

7
WALL OF ASSORTED CUTTERS AND HAND TOOLS

8
MILWAUKEE BENCH GRINDER

9
LOT ASST COUNTERSINK AND CENTER DRILLS

10
SET OF LOCKABLE PARREL DIFFERENT HEIGHTS

11
ASST. BROACHES

12
ASST. BOARING TOOLS

13
ASST. FRACTIONAL AND NUMBER DRILLS

14
ASST. LARGE DRILL BITS

15
LOT. ASST. DRILL BITS AND TOOL BOX (5PCS)

16
LOT ASST. DRILL BITS AND CHUCKS

17
WALTON BENCH VICE

18
GRANITE PLATE

19
ASST. CLAMPS

20
ASST. C CLAMPS

21
DOALL HEIGHT MICROMETER

22
LOT SIGN BAR SET WITH EXTRA SIGN, DIFFERENT ANGLES

23
ADJUSTABLE PARALLELS, DIFFERENT SIZES

24
SET OF GROUND ANGLE PARALLEL BLOCKS

25
LOT ASSORTED FILES

26
LOT OF V BLOCK CLAMPS

27
LOT ASST. TAPS

28
LOT ASST. TAPS

29
LOT ASST. TAPS & 2 TAP HANDLES/WRENCHES

30
LOT ASST. DIES

31
LOT ASST. TAPS

32
BROWN & SHARP PRECISION CENTER V BLOCKS

33
LOT ASST. REAMERS

34
STOP BLOCK

35
ASST. END MILLS

36
SET OF CLARK ADJUSTABLE WHOLE CUTTERS

37
GRINDING WHEEL DRESSER

38
DIVINING HEAD W/PLATES

39
RADIUS CUTTERS

40
LOT OF BOARING HEADS

41
EMIL WOHLHAUPTER BOARING HEAD

42
SPIN JIG

43
ASST. V BLOCKS

44
ASST. SIZES LETTER & NUMBER PUNCHES
3/32, 1/8, 3/16, 1/4

45
ASST. FLY CUTTERS

46
LIVE CENTER

47
DANLY GRANITE BLOCK

48
HEIGHT GAUGES & INSPECTION INDICATOR ON GRANITE BLOCK

49
LOT ASST. GRINDING WHEELS ON WALL

50
ACETAYLENE TORCH SET

51
DEMANGNETIZER

52
ARBOR PRESS

53
TML BY HARIG GRINDER

54
TML NEW BRITAIN GRINDER

55
LOT OF (2) TOOL BOXES
(1) WOODEN & (1) METAL

56
HORIZONTAL VERTICAL CHUCK ACCESSORY FOR BRIDGEPORT

57
BRIDGEPORT MILLING MACHINE

58
BRIDGEPORT MILLING MACHINE

59
BRIDGEPORT TEXTRON BTC 1
(DOES NOT WORK)

60
CLAUSING DRILL PRESS
(Needs Motor)

61
DELTA ROCKWELL DRILL PRESS
(Needs Motor)

62
MECHANICS CORI I
(Made in Italy, Not Wired for USA. Operation Unknown)

63
MORI SEIKI 15 CNC MACHINE SL
Needs Onboard Computer

64
THRIFTY BAR 4' BAR FEEDER

65
BAM CUTOFF SAW

66
ZEH AND HAHNEMANN CO PRESS

67
MANUAL FORKLIFT

68
40 TON HYDRAULIC PRESS

69
PRESS

70
BRIDGEPORT PORT TORO CUT TC2G CNC MACHINE

71
LOT OF ASST. SCRAP MATERIAL
ALUMINUM, 316 STAINLESS STEEL & 1018 KOTO STEEL

72
ELECTRIC FILING MACHINE

73
DUNLAP BENCH GRINDER

74
POLISHING GRINDER

75
BENCH GRINDER

76
HORIZONTAL VERTICAL COLLET INDEXER

77
SMALL RUMBLE VIBE

78
SHEET METAL CUTTER

79
METAL ENGRAVER

80
AIR PRESS

81
SMALL PRESS

82
SMALL PRESS

83
GRANITE PLATE

84
CLAUSING 15" LATHE
(Physical Length 8.5 Feet)

85
CLAUSING 17" LATHE
(Physical Length 11.5 Feet)

86
35" x 78" x 21" LYON METAL 2 DOOR LOCKING CABINET
Contents NOT Included

87
35" x 78" x 21" LYON METAL 2 DOOR LOCKING CABINET
Contents NOT Included

88
35" x 78" x 21" LYON METAL 2 DOOR LOCKING CABINET
Contents NOT Included

89
35" x 78" x 21" LYON METAL 2 DOOR LOCKING CABINET
Contents NOT Included

90
LOT ASST. COLLETS

91
METAL 3 TIER LAWYER STYLE BOOKCASE
ART METAL BRAND

92
LOT. ASST. INSPECTION TOOLS

93
VERMONT INSPECTION GUAGR PINS STARTING AT .061 TO .5005

94
RED HEAD HAMMER DRILL

95
GAUGE BLOCK SET

96
LITTLE GIANT JUNIOR 2 PC ADJUSTABLE DIE SCREW PLATE WITH GENUINE DIES

97
DRILLS, TAPS, AND DIES. FULL SET W/WRENCHES

98
REEMER SET (2 PCS.)

99
REPLACEMENT TORCH PARTS

100
OIL FILTER/EXCELON REGULATOR

101
36" x 72" x 18" 2 DOOR METAL CABINET

102
1 LOT OF ASSORTED ENDMILLS

103
ACORN DIE HOLDER

104
1 LOT OF WRENCHES AND SOCKETS

105
DESK

106
DESK

107
DESK

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
MACHINE SHOP & METAL WORKING EQUIPMENT
 Online Only Auction
Auction Date(s)
Bidding Starts: Thursday May 20 , 08:00 AM
Bidding Ends: Wednesday May 26 , 12:00 PM
Auction Location

Manville, NJ 08835
Company
Peter Costanzo Auctioneers

Website: www.petercostanzoauctioneers.com

Listing Terms and Conditions

ONLINE BIDDING TERMS

MACHINE SHOP EQUIPMENT

AUCTION DATE: MAY 20, 2021 TO MAY 26, 2021

1. The Auctioneers Group has put forth every effort in preparing the catalog for this auction to provide accurate descriptions of all items.  All property is sold “as-is” and it is the buyer’s responsibility to determine the exact condition of each item.  Printed statements or descriptions by staff are provided in good faith and are matters of opinion.  All sales are FINAL and there are absolutely NO refunds.

2. If you are interested in participating in our online auctions you must REGISTER ONLINE & REQUEST TO BID. Please provide an accurate phone number and email address upon registering. In order to complete your online registration and be approved to be bid, NJ bidders are required to post a $500.00 authorized hold deposit, Out-of-State bidders are required to post a $1,000.00 authorized hold deposit & International bidders are required to post a $10,000.00 authorized hold deposit. Please click here for online credit card authorization form. Once we receive the form back, we will call you to place the hold.  Failure to comply with the stated terms will result in a default and your deposit will be retained as liquidated damages.  (PLEASE NOTE: IN AN ADDITIONAL HOLD DEPSOIT MAY BE REQUIRED WHEN A PURCHASERS BIDS EXCEED $5,000.00. THE DEPOSIT IS AN AUTHORIZED HOLD ONLY.  YOUR CREDIT CARD WILL NOT BE CHARGED AT THIS TIME. IF YOU ARE NOT A WINNING BIDDER, THE MONEY WILL BE RELEASED FROM THE HOLD WITHIN APPROXIMATELY 24 HOURS OF THE CLOSE OF SALE). 

3. Please allow up to 24 hours for approval/authorization to be complete.  All persons requesting to bid MUST complete the registration process one hour prior to the close of auction (Wednesday May 26, 2021 by 12 Noon, EST).  Bid requests that are received after this time may not be approved.

4. In order to better serve our customers, all bidders must provide their name, address, daytime phone number, and email address where they can be contacted in order to assure good contact between The Auctioneers Group and the bidder throughout any transactions.

5. By registering to bid, all persons acknowledge to have full knowledge of these “Terms and Conditions of Sale” and agree to be bound thereby.

6. Bidding will open on Thursday May 20, 2021 at 9:00 AM and lots will start closing on Wednesday May 26, 2021 at 1:00 PM.  TWO lots will close every 1-minute beginning with Lot Number 1.

7. Bid Extension: The closing of a lot is automatically extended 3 minutes whenever a bid is placed during the last 3 minutes of the items closing time.

8. On-site Previews will be held on Thursday May 20th & Tuesday May 25th from 11:00 AM to 3:00 PM.  All previews will be held on premises at 1213 Kennedy Boulevard in Manville, NJ 08835.  Masks Required. Catalogs available on-site. 

9. BUYERS PREMIUM: There is a 18% Buyer’s Premium added to the final bid price. 

10. SALES TAX: This sale is NOT subject to State Sales Tax, EXCEPT for vehicles.  Vehicles will be subject to tax when registered.

11. PAYMENT: Wire transfers and bank checks are the preferred methods of payments.  Credit cards will also be accepted (there is a 3% fee for using credit cards).  You will be emailed an invoice that will include wire transfer instructions to complete payment.  If wire transfers or other forms of payment are not received by 4PM EST THURSDAY MAY 27, 2021, credit cards used for the credit card authorization forms provided for registration approval may be charged the full amount of the purchase.

12. REMOVAL/PICK-UP: PURCHASERS MUST REMOVE THE MERCHANDISE FROM THE PREMISES AT THEIR OWN RISK & LIABILTY.  The Auctioneers Group DOES NOT provide any shipping.  Merchandise is located at and must be picked up on premises located at 1213 Kennedy Boulevard in Manville, NJ 08835. All purchases are made at the purchaser’s risk and the auctioneer is not responsible if all or any part is lost, stolen, damaged or destroyed from any cause.  Auctioneer shall not be liable for non-delivery to the purchaser of any lots.  Shipping arrangements and cost are the BUYER’S SOLE RESPONSIBILITY. Removal and rigging are to be at the purchaser’s own expense, risk, and liability. All rigging and delivery arrangements are strictly the responsibility of the purchaser and rigging company. The Auctioneers Group takes no responsibility for these arrangements whatsoever. Rigging companies are required to provide a copy of their liability insurance to The Auctioneers Group.

13. REMOVAL PICK UP DATES & TIMES: Purchasers must schedule removal of items with The Auctioneers Group. Removal days and times for SMALLER ITEMS will be Thursday May 27th between 10AM and 3PM & Friday May 28th between 9AM and 12PM EST.  Removal of LARGER ITEMS will be by appointment only on Tuesday & Wednesday June 1st & 2nd from 10AM to 3PM, please call auction company to schedule pick-up.  All items must be picked up by Wednesday June 2, 2021.  NO REMOVAL SATURDAY, SUNDAY, OR MONDAY (MAY 29TH-31ST).   

14. In the event of a billing error the buyer is obligated to pay any deficiency upon presentation of a corrected bill.

15. Auctioneer reserves the right to resolve any dispute regarding bids or bidders.

16. Record of the sale is being kept by the auctioneer & bookkeeper and will be taken as final in the event of any dispute.

17. THIS LISTING IS ONLY A GUIDE AND ACCURACY IS NOT GUARANTEED.  EVERY ITEM WILL SELL “AS IS” “WHERE IS”.  PLEASE INSPECT INVENTORY & EQUIPMENT PRIOR TO BIDDING.  ALL SALES ARE FINAL.  No sale shall be invalidated by reason of any defect or inaccuracy in any of the lots by reason of their being incorrectly described in this listing or elsewhere and no liability shall be borne by the Auctioneers in respect of any such fault or errors.  These listings have been prepared only as a guide based on information from sources generally believed to be reliable and from the Consignor, but the accuracy thereof cannot be guaranteed or warranted by the Auctioneers.  Bidder acknowledges that it is their responsibility to inspect all equipment and to make his own inquires. There shall be no guarantees or warranties, expressed or implied, statutory or otherwise, of any nature whatsoever.  Each and every lot will be sold “as is” “where is”.  Specifically, but not to restrict the generality of the foregoing, the Auctioneers make no representation or warranty on any of the lots which are the subject of the auction. 

18. The auction company reserves the right to refuse any bid or bidder. The auction company is not obligated to approve all bidder registration requests.

19. USE OF SITE: The Auctioneers Group cannot and will not be held responsible for any interruption in service, errors, and/or omissions caused by any means and does not guarantee continuous, uninterrupted service or use of the site.  Bidder acknowledges that this auction is conducted electronically and relies on hardware and software that may malfunction without warning.  The Auctioneers Group, in its sole discretion, may void any sale, temporarily suspend bidding and re-sell any item/lots that were affected by any malfunction.  

20. PURCHASER COMPLIANCE: If the purchaser fails to comply with any of the stated and printed “Terms and Conditions of Sale” included but not limited to full payment, method of payment and removal of purchased goods, the auctioneer at his option may declare the purchaser in default and retain all monies paid as liquidated damages and pursue legal remedies available for enforcement of purchaser’s performance or to recover losses caused by purchaser’s default.  These losses include, but are not limited to, restocking, moving, storage and any and all expenses related to the reselling of the goods and any loss on any subsequent sale.

 

SALE MANAGED & CONDUCTED BY

 

THE AUCTIONEERS GROUP

(609) 693-6899 / (732) 776-7222

www.theauctioneersgroup.com

 

 



1
LOT ASSORTED MACHINIST HAND TOOLS

2
8" KURT VICE

3
CARBIDE TIPPED TOOL BITS

4
SLITTING SAWS AND CUTTERS

5
ARBORS AND SOME CUTTERS ATTACHED

6
LOT OF ASST. CUTTERS

7
WALL OF ASSORTED CUTTERS AND HAND TOOLS

8
MILWAUKEE BENCH GRINDER

9
LOT ASST COUNTERSINK AND CENTER DRILLS

10
SET OF LOCKABLE PARREL DIFFERENT HEIGHTS

11
ASST. BROACHES

12
ASST. BOARING TOOLS

13
ASST. FRACTIONAL AND NUMBER DRILLS

14
ASST. LARGE DRILL BITS

15
LOT. ASST. DRILL BITS AND TOOL BOX (5PCS)

16
LOT ASST. DRILL BITS AND CHUCKS

17
WALTON BENCH VICE

18
GRANITE PLATE

19
ASST. CLAMPS

20
ASST. C CLAMPS

21
DOALL HEIGHT MICROMETER

22
LOT SIGN BAR SET WITH EXTRA SIGN, DIFFERENT ANGLES

23
ADJUSTABLE PARALLELS, DIFFERENT SIZES

24
SET OF GROUND ANGLE PARALLEL BLOCKS

25
LOT ASSORTED FILES

26
LOT OF V BLOCK CLAMPS

27
LOT ASST. TAPS

28
LOT ASST. TAPS

29
LOT ASST. TAPS & 2 TAP HANDLES/WRENCHES

30
LOT ASST. DIES

31
LOT ASST. TAPS

32
BROWN & SHARP PRECISION CENTER V BLOCKS

33
LOT ASST. REAMERS

34
STOP BLOCK

35
ASST. END MILLS

36
SET OF CLARK ADJUSTABLE WHOLE CUTTERS

37
GRINDING WHEEL DRESSER

38
DIVINING HEAD W/PLATES

39
RADIUS CUTTERS

40
LOT OF BOARING HEADS

41
EMIL WOHLHAUPTER BOARING HEAD

42
SPIN JIG

43
ASST. V BLOCKS

44
ASST. SIZES LETTER & NUMBER PUNCHES
3/32, 1/8, 3/16, 1/4

45
ASST. FLY CUTTERS

46
LIVE CENTER

47
DANLY GRANITE BLOCK

48
HEIGHT GAUGES & INSPECTION INDICATOR ON GRANITE BLOCK

49
LOT ASST. GRINDING WHEELS ON WALL

50
ACETAYLENE TORCH SET

51
DEMANGNETIZER

52
ARBOR PRESS

53
TML BY HARIG GRINDER

54
TML NEW BRITAIN GRINDER

55
LOT OF (2) TOOL BOXES
(1) WOODEN & (1) METAL

56
HORIZONTAL VERTICAL CHUCK ACCESSORY FOR BRIDGEPORT

57
BRIDGEPORT MILLING MACHINE

58
BRIDGEPORT MILLING MACHINE

59
BRIDGEPORT TEXTRON BTC 1
(DOES NOT WORK)

60
CLAUSING DRILL PRESS
(Needs Motor)

61
DELTA ROCKWELL DRILL PRESS
(Needs Motor)

62
MECHANICS CORI I
(Made in Italy, Not Wired for USA. Operation Unknown)

63
MORI SEIKI 15 CNC MACHINE SL
Needs Onboard Computer

64
THRIFTY BAR 4' BAR FEEDER

65
BAM CUTOFF SAW

66
ZEH AND HAHNEMANN CO PRESS

67
MANUAL FORKLIFT

68
40 TON HYDRAULIC PRESS

69
PRESS

70
BRIDGEPORT PORT TORO CUT TC2G CNC MACHINE

71
LOT OF ASST. SCRAP MATERIAL
ALUMINUM, 316 STAINLESS STEEL & 1018 KOTO STEEL

72
ELECTRIC FILING MACHINE

73
DUNLAP BENCH GRINDER

74
POLISHING GRINDER

75
BENCH GRINDER

76
HORIZONTAL VERTICAL COLLET INDEXER

77
SMALL RUMBLE VIBE

78
SHEET METAL CUTTER

79
METAL ENGRAVER

80
AIR PRESS

81
SMALL PRESS

82
SMALL PRESS

83
GRANITE PLATE

84
CLAUSING 15" LATHE
(Physical Length 8.5 Feet)

85
CLAUSING 17" LATHE
(Physical Length 11.5 Feet)

86
35" x 78" x 21" LYON METAL 2 DOOR LOCKING CABINET
Contents NOT Included

87
35" x 78" x 21" LYON METAL 2 DOOR LOCKING CABINET
Contents NOT Included

88
35" x 78" x 21" LYON METAL 2 DOOR LOCKING CABINET
Contents NOT Included

89
35" x 78" x 21" LYON METAL 2 DOOR LOCKING CABINET
Contents NOT Included

90
LOT ASST. COLLETS

91
METAL 3 TIER LAWYER STYLE BOOKCASE
ART METAL BRAND

92
LOT. ASST. INSPECTION TOOLS

93
VERMONT INSPECTION GUAGR PINS STARTING AT .061 TO .5005

94
RED HEAD HAMMER DRILL

95
GAUGE BLOCK SET

96
LITTLE GIANT JUNIOR 2 PC ADJUSTABLE DIE SCREW PLATE WITH GENUINE DIES

97
DRILLS, TAPS, AND DIES. FULL SET W/WRENCHES

98
REEMER SET (2 PCS.)

99
REPLACEMENT TORCH PARTS

100
OIL FILTER/EXCELON REGULATOR

101
36" x 72" x 18" 2 DOOR METAL CABINET

102
1 LOT OF ASSORTED ENDMILLS

103
ACORN DIE HOLDER

104
1 LOT OF WRENCHES AND SOCKETS

105
DESK

106
DESK

107
DESK