Estate auction of Tools!
Listing ID#: 84124

Auction Location

Knoxville, TN 37923
Auction Dates and TimesSALE IS COMPLETED
Bidding Starts: Sunday Aug 12
Bidding Ends: Sunday Aug 12
Auction Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
JD's Realty & Auction

Contact: Jason Deel
Phone: 865-264-4641
Email: info@jdsauctions.com
Website: www.jdsauctions.com

GoToAuction.com ID#: 1477
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Terms and Conditions of the Sale: T1) All items offered for sale at the Auction ("Items", "Property", "Product", "Purchases") subject to the following Terms and Conditions of Sale, which, combined with each Auction's specific terms as posted in materials and on the web, make up the Complete Terms and Conditions of Sale. T1a). Notice given JD's Auctions LLC and Auctioneers have the right in accordance with Tennessee State law to bid on this and any other auction for their purpose or on behalf of the Property owners or the estate. T2) All items are being sold As-Is with no warranty. Auctioneer shall not be responsible for the correct description, authenticity, genuineness of, or defect in any lot, and makes no warranty in connection therewith. On-site inspection of items being sold is recommended. Auctioneer makes every effort to provide accurate information about the items being sold. However, neither Auctioneer nor its Client will assume responsibility for Buyer's bidding errors. It is Buyers' full responsibility to confirm the accuracy of items offered for sale. Buyers are recommended to inspect all items. Descriptions and photos are offered as a guide only. Do not rely solely on photos to make buying decisions, be sure to read descriptions, and ask questions if you are unclear. Auctioneer shall not be held responsible for such errors as posting the wrong photo for an item. When in doubt about the condition of an item, please bid accordingly. You may preview all of the items for auction on the first and third Saturday starting at 11am. In case of an online-only auction, items may be previewed the Friday (10am-4pm) before the auction is set to close or as prescribed by the auctioneer. T2a). Bidder understands and agrees that this agreement and all rights of the parties there-under, shall be governed by the laws of the County of Anderson, State of Tennessee and any action brought by either party shall be brought in the Courts of the State of Tennessee. In the event, that for any reason, the forum is deemed to be sufficiently inconvenient or the agreement on the forum selection is unenforceable it is still the intention of the parties that the Laws of the State of Tennessee govern the parties agreement and their rights attended thereto. Buyer agrees that any legal filed action will take place within the county of Anderson, City of Clinton, State of Tennessee. T3) ALL SALES ARE FINAL. A successful bid at auction, whether live or online, constitutes a legally binding contract of sale. All sales are final. There will be no refunds, returns or exchanges. T4) Absence of Warranties. The condition of the items being offered varies. The Buyer understands and agrees: (1) that any description or sample of the items given or furnished by Auctioneer is solely for identification, and does not create any warranty expressed or implied, that the item actually conforms to such description or sample, (2) that Buyer or agent on Buyer's behalf has inspected or has had the opportunity to inspect, all of the items upon which Buyer will be bidding and/or does purchase, (3) that all items are purchased and accepted by Buyer "AS IS", "WHERE IS" and "WITH ALL FAULTS". AUCTIONEER MAKES NO WARRANTIES OR GUARANTEES WHATSOEVER WHETHER WRITTEN, ORAL OR IMPLIED AS TO QUALITY, AUTHENTICITY, QUANTITY, CONDITION, USEABILITY, SALEABILITY, WEIGHT, MEASUREMENT, YEAR, MODEL, MECHANICAL CONDITION, PERFORMANCE, OR OTHER SPECIFICATIONS, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR WARRANTY AGAINST PATENT, TRADEMARK, COPYRIGHT OR TRADE SECRET INFRINGEMENT, (4) in the event there are manufacturer warranties in effect for the item purchased, Buyer must make all claims thereunder directly with the provider of the warranty. No statement or statements of any other paragraph herein shall be construed to in any way contradict the provisions of this paragraph. T5) Bidder's Number. The bidder's number is nontransferable. All bids, online or in-house, made using the bid number will be the responsibility of the Buyer. T6) Failure to Remove Purchases. In the event items are not removed within three (3) business days after the auction(s) end OR freight/large items shipping information has not been received within five (5) business days after the full payment of the item(s), the items purchased shall be deemed abandoned and Buyer will lose any right, title, or interest Buyer may have acquired and the items shall revert and repossess to Auctioneer without further notice to Buyer. Auctioneer shall also be entitled to any costs associated with the removal, storage and reselling of Buyer's items, and any other charges, fees, and expenses incurred as a result of Buyer's failure, including all attorney fees and costs incurred by Auctioneer to enforce Buyer's obligations hereunder. T7) Buyer's Premium Online buyer's premium is 15%, there is a 3% credit card surcharge. Payment: P1) By agreeing to our terms and conditions you agree to allow us to charge the credit card on file if you are the winner upon close of the auction. P2) Local bidders, you may pay with a personal or cashier's check. You must contact the office prior to the close of the auction and indicate that you will pay with cash or check. You may also pick up your items or have them shipped. If you are a TN resident, please contact the office if you would like your item(s) shipped. P3) We accept all major credit cards. P4) NONPAYMENT Any declined credit card payment will have two (2) business days to contact the office (865-264-4641) and pay with a valid credit card. If payment has not be successfully received with two (2) business days, you will no longer be authorized to bid at JD's Auctions and negative feedback left. P5) Verbal/written "cancellations" JD's does not recognize or accept cancellations for any item for any reason won at auction. If the winning bidder decides to "cancel" an item it will be treated as a nonpayment (see P8). If a winning bidder decides to "cancel" an item after it has been paid for, there will be no refunds, no exceptions. P10) Personal Information It is vital that your personal information (name, address, phone number, and email) are correct. We ship and contact using that information and if it not correct, delays will occur. JD's Auctions is not responsible for correcting your information and is not responsible for any delays or incorrect delivery of items due to incorrect personal information. Please contact the office if you would like to verify your information: 865-264-4641. Shipping: S1) Buyer to pay all shipping charges. Shipping will be added to the total cost of the item(s) (hammer price + buyer's premium + sales tax (if applicable). Our third-party shippers do not invoice but contact you directly via phone or email for payment processing. Please contact them directly with any shipping questions, claims, or quotes. We use The Mail Center ETC. If you are unsure where your item may have been sent for shipping, please contact the office @ 865-264-4641. The Mail Center ETC Teresa or Ashley 865-483-4177 S2) Large, extremely fragile, & freight shipping Buyer has five (5) business days to contact the office (865-264-4641) with shipping arrangements (name of shipper, contact information, and pickup timeline). All exceptionally large or irregularly shaped items will be packaged through UPS Packing and shipped via UPS. Furniture, large signs, or extra large pieces may require freight (anything over 110lbs packaged). We have shipped using two companies: Rancho Buck out of Atlanta, GA, and UShip.com. If freight or third-party shipping is needed, it is the responsibility of the buyer to coordinate and pay for all shipping. Please contact us prior to bidding with any shipping questions. Any buyer who fails to provide this information will fall under: Failure to Remove Items (para T6) Rancho Buck 404-524-9122 Uship.com S3) In-house shipping We no longer provide in-house shipping. S4) Non-Payment of Shipping If the buyer refuses or does not wish to pay for shipping or will not pick up the winning items, JD's Auctions will not refund the purchase for any reason. The buyer can then become a consignor and consign the item(s) with JD's Auctions. A contract will be sent via email for the buyer to review and sign. The contract must be scanned and emailed back to us or mailed. The buyer has five (5) days to return the signed contract. When the contract is received, JD's Auctions will lot the item in an auction. If the contract is NOT received within five (5) days, the items will be deemed abandoned and become the sole property of JD's Auctions (para T6). S5) INTERNATIONAL BUYERS You are responsible for any and all customs fees in addition to USPS International First Class or USPS International Priority Mail costs. Depending on the item, UPS/FedEx International may be used to ship your winning item(s) S6) FIREARMS All firearms purchased at auction by a non-Tennessee resident must have that firearm(s) shipped to an FFL holder. It is the buyer's responsibility to pay for all shipping, background check, and transfer fees. Please contact the office (865-264-4641) and provide the contact information for your preferred FFL. All handguns will be shipped UPS. Long guns may be shipped USPS or UPS, depending on lowest cost or buyer's preference.
Listing Information
Bidding is now open, place your bid today!

1
Makita 1/2" Drill with Handle - Electric
Model 6302 - 120 Volts - Couple of nicks in the insultation in the cords - Works

2
Sears Craftsman Saber Saw
Quarter Horsepower - Double insulated - 5/8" stroke - Works

3
1/4" Air Hydraulic Riveter - Central Pneumatics
90-120 PSI Air Pressure - Air Consumption: 4.5 CFM @ 90PSI - Item 98898 - Air Inlet 1/4"-18 NPT

4
Makita Electric Drill
Model 6821 - Works and in good condition

5
Owatonna Tool Company Sealant Dispenser
Air Driven - Model 7055 - Good condition

6
Electric Makita Angel Drill
Model DA3000 - Variable speed 3/8" - 10 mm (3/8") chuck. Measures 3-1/2" from tip of chuck to widest portion of tool body. Variable speed (0-1,400 RPM) for easy starting and accurate hold positioning. Ball bearing construction for long tool l

7
Impact Wrench- Rodac Air Power
5/8" drive - Model 676

8
6' Range Cord
Carol - 8 guage - 4 wire - 240 volt

9
Snap-On Tools
CJ-85-1 Bearing/Gear Puller plus….

10
Selection of four gear bearing puller
Drive bolt missing on one


12
Variety of Screws for puller
Six total - See photos

13
Selection of five pullers
One has screw missing - See photos



16
Four pullers
See photos -- one has screw missing




20
Two Pullers
See photos - Larger one is a Snap-on

21
Weller Soldering Gun
Model 8200N - Works

22
Four Hammers
Small sledge hammer, brasshead hammer, ballping hammer, etc.

23

24
Central Machinery 10" Table Saw
Model 97896 - 2.4 Horsepower - 120 Volt - 5000 rpm - Works - One saw blade in machine, another included

25
Snap-on gear and bearing puller kit
Not all inside are snap-on. Very large.

26
Micrometer & Vintage Gauging Tool
Both in original boxes

27
Snap-On Emergency Ignition System
See photos - Not tested, cord frayed, needs to be fixed

28
Four Spreader Sleeves
See photos - Screw missing on one


30
All Power Spring Compressor Kit w/ pliers
6 sizes spring compressors & pliers


32




36
Central Tool Company Guage in Original Box
Vintage guage in original box



39
Snap-On Cylinder Shorting Expanded Scale Tachomet
MT460 - See photos - Has not been tested


41
Assortment of household items
Fire Extenguisher, Propane Torch, Ropes, Non-Locking Interior Door Kit - Not Available for Shipping

42
Submersible Pump Control Box & Dryer Cord Outlet
Franklin Electric and Slater Brands

43
Napa Soldering Gun with Case
Works - Trig-R-Heat 1000 Degrees F - 150 and 400 watts 1/4" pyramid trip worklight, 120 VAC, High Performance Tool for medium and heavy duty general purpose soldering. - Model 770-2527

44
Snap-on Air Conditioning Gauge
Snap-on Air Conditioning Guages made by Tiff - R22, R12, and R502 - Hoses are approximately 6"

45
Oxygen Acetylene Torch Kit
Includes guages, hoses and torch


47
Radnor Soldering Rods - 6 included
General Purpose Brazing Alloy - See photos - 3' long

48
Mild Steel Gas Welding Rods - 11 included
High Quality Oxygen Acetylene

49
Dewalt Table Saw
Works DW871 - Serial Number 266769 - 10"

50
Oxygen Acetylene Hose
Approximately 40-50 feet long

51
Assortment of Gloves, socks and gloves
Gloves, insulated pants, socks, welding gloves, and tool belt





56
Japan Micrometer
50-75 mm - In wooden box - Vintage

57
Blind Fastener Installation Kit
for General Motors Products - D-100-4FBA


59
Digital Micrometer
Japan Micrometer Series 550

60
Central Tool Company Gauge Kit
See photos - Original Box

61
NSK Micrometer
See photos

62
DL106 Automotive Meter with case and instruction m
Hand held, battery operated instrument used for testing and trouble shooting automotive electronic systems.


64
Ratabraach Heavy Duty Hole Maker
Part No GA219A7 - sizes 5/17 thru 3/4

65
Assortment of Carpet Tools
Carpet Cutters, Spline Tool, Ridgid, etc.



68
Textron Lag Screws
Assorted sizes lag screws

69
Pair of 6" C-Clamps
Like New - See photos




73
Bearing/Gear Puller Bolts and Pins
Large Assortment - See photos


75
Soldering Gun,Battery Screwdriver,2 Thread Repair
Screwdriver works but soldering gun does not


77
Bearing/Gear Pulling Tools
See photos - 3 pieces

78
Assortment of Tools
Wrenches, Screwdriver, Punch and more



81
Magnifying Glass/Light
Works - See photos

82
Assortment of Large Tools & PartsFor Gear/Bearing
Includes Extension Hook, Jack parts, etc. - Tape Measurer not included


84
Assortment of Tools for welders
Torches and other items, see photos

85
Two multi-drawer boxes full of screws and misc. it
Lots to offer in this one. Full of items for your workshop.



88
Drawer Full of Chemical Products
Including Wood Filler, Grease, Bead Goop, etc. - No shipping available - Cabinet not included

89
Drawer Full of Misc Oils
Including Gear Oil, Shock Oil, Small Matt Gas Torch, etc. - No shipping available - Cabinet not included

90
Drawer Full of Misc Oils
Including Oil, grease, and miscellaneous sprays - No shipping available - Cabinet not included

91
3-Drawer Metal Workshop Cabinet w/ Butcherblock St
3' Hx18"Wx24"D - does not includes items inside

92
Selection of Various types of tape and 12" Miter
includes electrical, plumbing and other tape as well as the miter box





97
6.5 Gallon parts washer loaded with sprays and tir
See photos - No shipping available

98
GM Connector Adaptor and Multi-Drawer Box
Electrical connectors inside multi-drawer box


100
16" Lawnmower Blades - 3
See photos - Measuring Tape Not Included


102
Homemade Extra Fuel Tank
Approximately five gallon tank

103
NAPA Fleet 2 ton floor jack
Very good condition - See photos - VERY HEAVY

104
SnapOn 12-drawer Tool Chest - Red
Very Good Condition - Fold up top - 32.5"Wx18"Dx18.25"H - Closed

105
NAPA 10-drawer Roll About Tool Chest - Red
Heavy Duty Snap-on Vice Attached as well as 1/4" steel plate on top, chain included - 46"Wx26"Dx38"H -

106
Engine Hoist
See photos


108
Set of 2 Pipe Wrenches
10" and 14" - See photos

109
TorqOMeter Wrench
3/4" drive - Untested


111

112
Three large screwdrivers
One end of one has been altered - See photos



115
Dozen Ratcheting Wrenches
Includes some Mac

116
Mac Tools Impact Chisel
See photos - Not Tested

117
Small Drill Bits in box & Small screwdrivers
Large Assortment of sizes- See photos

118
AirDriven Buffer with extra pads
See photos - Not Tested

119
Two SnapOn Wratchet/Wrench and Extension
3 Extensions - 1/4" - See photos


121
Four Pry Bars
Assorted size

122
18 Wrenches - Various Sizes
Some Mac - Some SnapOn

123
10 Wrences - Various Size
Some Mac - Some SnapOn

124
9 Wrenches - Various Sizes
Craftsman and SnapOn

125
SnapOn 3/8" Impact Tool - Air Driven
With Protective Leather Case - Not Tested


127


129

130

131
Four Hand Tools
See photos

132
Trio of Heavy Equipment Tools
Gear Puller and more!





137
Rodac Air Powered Drill
Model Number 211C - Not tested - see photos - No fitting


139
MAC Air Powered Drill with hose
Maximum spead of 20K RPM - Not tested


141
Air Powered Cutter
Not tested - see photos

142
Homemade Weed Burner with Torch
Has some propane in the tank - Not Available for Shipping


144
Rodac Air Powered Impact Tool
See photo - Not Tested - No Fitting


146
Snap On SVT270 Vacuum Pump Test Gun
Diagnostic Service Tool - Compression and Vacuum Tester - Not Tested


148
Hand Tools - 4
See photos

149
Hand Tools - 4
See photos

150
Hand Tools - 4
See photos






156
Snap On - Set of 2 Ratcheting Wrenches
7/8" and 18 mm Ratcheting Wrenches


158
NAPA Impact - 1/2" Drive Deep Well Sockets
Large heavy duty - see photos



161
Snap On 1/2" drive sockets
Some metric some standard



164
Snap On 1/4" drive
Some standard and some deep well

165
Allen wrench set
1/4" and 3/8" - some are MSC

166
Allen wrench set
1/4" and 3/8" Mostly Snap On

167
1/4" drive - Metric Socket Set
Blend of Craftsman, SnapOn


169
SnapOn and Other 3/8" and 1/4" drives
Sockets - See photos - Some metric and some standard

170
MAC Swivel Sockets
1/2" drive - See photos


172
3/8" drive - 3 extensions and two tools
MAC Ratchet - Wrench Snap On


174



177
Snap On 3/8" drive pair of ratchets
One curved handle and swivel head and other is ridgid

178
Pair of Footrests for Motorcycle ?
See photos - Brand new - never used

179
Cooling System Tester
Not tested - See photos

180
Torx Bits Sockets
Partly 3/8" and 1/4" drive - Some Snap On and some MAC


182
Snap On 1/4" drive sockets
various bits - see photos

183
Snap On 1/4" and 3/8" drive sockets
various bits - see photos


185
3/8" Drive Mix of Sockets
MAC, SnapOn, etc. - 3 sockets possibly two sided?


187
Snap On 250PSI Kilopascal Compression Gauge
Vintage Parts Tool with and two additional parts included




191
Large selection of various hand tools
Including Staple Gun, Crimping Tools, etc. - Measuring Tape NOT Included


193

194
3/8" drive sockets and extensions
Various sockets and extensions

195
Various Tools
Mostly Snap On - Measuring Tape Not Included

196
Various Tools
See photos - Measuring Tape Not Included

197
Selection of Various Drive Sockets
Mostly Snap On - Measuring Tape Not Included

198
Various Tools
See photos - Measuring Tape Not Included

199
Large Selection Box end and Open end wrenches - Sm
See photos - Measuring Tape Not Included

200
Small (8) ratcheting wrenches
See photos - Measuring Tape Not Included

201
Large Assortment of Hand tools
Measuring Tape Not Included - See photos

202
Large Assortment of Tools
Numberous Thread Repair Kits, etc. - Measuring Tape Not Included - See photos

203
3 spools of solder and box of brass studs
See photos - Measuring Tape Not Included

204
Fiamm - Set of Motorcycle (?) Horns
Made in Italy - See photos

205
3/4" Drive Sockets
Mostly 3/4" inch but there are a couple other sizes as well - Variety of Brands

206
Evercraft Box End and Open End Wrenches
Set of 3 - Large - See photos - Measuring Tape Not Included

207
Pair of Evercraft Box End and Open End Wrenches
Set of 2 - Large - See photos - Measuring Tape Not Included

208
Pair of Evercraft Box End and Open End Wrenches
Set of 2 - Large - See photos - Measuring Tape Not Included

209
Large Assortment of 3/4" Drive Sockets (Mostly)
See photos - Measuring Tape Not Included

210
Large Assortment of 3/4" Drive Sockets (Mostly)
See photos - Measuring Tape Not Included

211
Pair of Air Powered Tools
See photos - Measuring Tape Not Included

212
Large Assortment of 3/4" Drive Sockets (Mostly)
See photos - Measuring Tape Not Included

213
Large Bucket full of miscellaeous items
See photos - Measuring Tape Not Included

214
Large assortment of miscellaneous tools
See photos - Measuring Tape Not Included

215
Large assortment of miscellaneous tools inc. Tubin
See photos - Measuring Tape Not Included

216
Large assortment of miscellaneous tools
See photos - Measuring Tape Not Included


Auction License: 6826
Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend







Sponsored Links

Estate auction of Tools!

JD's Realty & Auction

JD's Realty & Auction


Contact: Jason Deel
Phone: 865-264-4641
Sale Location
8632 Springfield Road
Knoxville, TN 37923
Sale Dates and Times
Sale Terms and Conditions
Terms and Conditions of the Sale: T1) All items offered for sale at the Auction ("Items", "Property", "Product", "Purchases") subject to the following Terms and Conditions of Sale, which, combined with each Auction's specific terms as posted in materials and on the web, make up the Complete Terms and Conditions of Sale. T1a). Notice given JD's Auctions LLC and Auctioneers have the right in accordance with Tennessee State law to bid on this and any other auction for their purpose or on behalf of the Property owners or the estate. T2) All items are being sold As-Is with no warranty. Auctioneer shall not be responsible for the correct description, authenticity, genuineness of, or defect in any lot, and makes no warranty in connection therewith. On-site inspection of items being sold is recommended. Auctioneer makes every effort to provide accurate information about the items being sold. However, neither Auctioneer nor its Client will assume responsibility for Buyer's bidding errors. It is Buyers' full responsibility to confirm the accuracy of items offered for sale. Buyers are recommended to inspect all items. Descriptions and photos are offered as a guide only. Do not rely solely on photos to make buying decisions, be sure to read descriptions, and ask questions if you are unclear. Auctioneer shall not be held responsible for such errors as posting the wrong photo for an item. When in doubt about the condition of an item, please bid accordingly. You may preview all of the items for auction on the first and third Saturday starting at 11am. In case of an online-only auction, items may be previewed the Friday (10am-4pm) before the auction is set to close or as prescribed by the auctioneer. T2a). Bidder understands and agrees that this agreement and all rights of the parties there-under, shall be governed by the laws of the County of Anderson, State of Tennessee and any action brought by either party shall be brought in the Courts of the State of Tennessee. In the event, that for any reason, the forum is deemed to be sufficiently inconvenient or the agreement on the forum selection is unenforceable it is still the intention of the parties that the Laws of the State of Tennessee govern the parties agreement and their rights attended thereto. Buyer agrees that any legal filed action will take place within the county of Anderson, City of Clinton, State of Tennessee. T3) ALL SALES ARE FINAL. A successful bid at auction, whether live or online, constitutes a legally binding contract of sale. All sales are final. There will be no refunds, returns or exchanges. T4) Absence of Warranties. The condition of the items being offered varies. The Buyer understands and agrees: (1) that any description or sample of the items given or furnished by Auctioneer is solely for identification, and does not create any warranty expressed or implied, that the item actually conforms to such description or sample, (2) that Buyer or agent on Buyer's behalf has inspected or has had the opportunity to inspect, all of the items upon which Buyer will be bidding and/or does purchase, (3) that all items are purchased and accepted by Buyer "AS IS", "WHERE IS" and "WITH ALL FAULTS". AUCTIONEER MAKES NO WARRANTIES OR GUARANTEES WHATSOEVER WHETHER WRITTEN, ORAL OR IMPLIED AS TO QUALITY, AUTHENTICITY, QUANTITY, CONDITION, USEABILITY, SALEABILITY, WEIGHT, MEASUREMENT, YEAR, MODEL, MECHANICAL CONDITION, PERFORMANCE, OR OTHER SPECIFICATIONS, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR WARRANTY AGAINST PATENT, TRADEMARK, COPYRIGHT OR TRADE SECRET INFRINGEMENT, (4) in the event there are manufacturer warranties in effect for the item purchased, Buyer must make all claims thereunder directly with the provider of the warranty. No statement or statements of any other paragraph herein shall be construed to in any way contradict the provisions of this paragraph. T5) Bidder's Number. The bidder's number is nontransferable. All bids, online or in-house, made using the bid number will be the responsibility of the Buyer. T6) Failure to Remove Purchases. In the event items are not removed within three (3) business days after the auction(s) end OR freight/large items shipping information has not been received within five (5) business days after the full payment of the item(s), the items purchased shall be deemed abandoned and Buyer will lose any right, title, or interest Buyer may have acquired and the items shall revert and repossess to Auctioneer without further notice to Buyer. Auctioneer shall also be entitled to any costs associated with the removal, storage and reselling of Buyer's items, and any other charges, fees, and expenses incurred as a result of Buyer's failure, including all attorney fees and costs incurred by Auctioneer to enforce Buyer's obligations hereunder. T7) Buyer's Premium Online buyer's premium is 15%, there is a 3% credit card surcharge. Payment: P1) By agreeing to our terms and conditions you agree to allow us to charge the credit card on file if you are the winner upon close of the auction. P2) Local bidders, you may pay with a personal or cashier's check. You must contact the office prior to the close of the auction and indicate that you will pay with cash or check. You may also pick up your items or have them shipped. If you are a TN resident, please contact the office if you would like your item(s) shipped. P3) We accept all major credit cards. P4) NONPAYMENT Any declined credit card payment will have two (2) business days to contact the office (865-264-4641) and pay with a valid credit card. If payment has not be successfully received with two (2) business days, you will no longer be authorized to bid at JD's Auctions and negative feedback left. P5) Verbal/written "cancellations" JD's does not recognize or accept cancellations for any item for any reason won at auction. If the winning bidder decides to "cancel" an item it will be treated as a nonpayment (see P8). If a winning bidder decides to "cancel" an item after it has been paid for, there will be no refunds, no exceptions. P10) Personal Information It is vital that your personal information (name, address, phone number, and email) are correct. We ship and contact using that information and if it not correct, delays will occur. JD's Auctions is not responsible for correcting your information and is not responsible for any delays or incorrect delivery of items due to incorrect personal information. Please contact the office if you would like to verify your information: 865-264-4641. Shipping: S1) Buyer to pay all shipping charges. Shipping will be added to the total cost of the item(s) (hammer price + buyer's premium + sales tax (if applicable). Our third-party shippers do not invoice but contact you directly via phone or email for payment processing. Please contact them directly with any shipping questions, claims, or quotes. We use The Mail Center ETC. If you are unsure where your item may have been sent for shipping, please contact the office @ 865-264-4641. The Mail Center ETC Teresa or Ashley 865-483-4177 S2) Large, extremely fragile, & freight shipping Buyer has five (5) business days to contact the office (865-264-4641) with shipping arrangements (name of shipper, contact information, and pickup timeline). All exceptionally large or irregularly shaped items will be packaged through UPS Packing and shipped via UPS. Furniture, large signs, or extra large pieces may require freight (anything over 110lbs packaged). We have shipped using two companies: Rancho Buck out of Atlanta, GA, and UShip.com. If freight or third-party shipping is needed, it is the responsibility of the buyer to coordinate and pay for all shipping. Please contact us prior to bidding with any shipping questions. Any buyer who fails to provide this information will fall under: Failure to Remove Items (para T6) Rancho Buck 404-524-9122 Uship.com S3) In-house shipping We no longer provide in-house shipping. S4) Non-Payment of Shipping If the buyer refuses or does not wish to pay for shipping or will not pick up the winning items, JD's Auctions will not refund the purchase for any reason. The buyer can then become a consignor and consign the item(s) with JD's Auctions. A contract will be sent via email for the buyer to review and sign. The contract must be scanned and emailed back to us or mailed. The buyer has five (5) days to return the signed contract. When the contract is received, JD's Auctions will lot the item in an auction. If the contract is NOT received within five (5) days, the items will be deemed abandoned and become the sole property of JD's Auctions (para T6). S5) INTERNATIONAL BUYERS You are responsible for any and all customs fees in addition to USPS International First Class or USPS International Priority Mail costs. Depending on the item, UPS/FedEx International may be used to ship your winning item(s) S6) FIREARMS All firearms purchased at auction by a non-Tennessee resident must have that firearm(s) shipped to an FFL holder. It is the buyer's responsibility to pay for all shipping, background check, and transfer fees. Please contact the office (865-264-4641) and provide the contact information for your preferred FFL. All handguns will be shipped UPS. Long guns may be shipped USPS or UPS, depending on lowest cost or buyer's preference.
Listing Details
Bidding is now open, place your bid today!

1
Makita 1/2" Drill with Handle - Electric
Model 6302 - 120 Volts - Couple of nicks in the insultation in the cords - Works

2
Sears Craftsman Saber Saw
Quarter Horsepower - Double insulated - 5/8" stroke - Works

3
1/4" Air Hydraulic Riveter - Central Pneumatics
90-120 PSI Air Pressure - Air Consumption: 4.5 CFM @ 90PSI - Item 98898 - Air Inlet 1/4"-18 NPT

4
Makita Electric Drill
Model 6821 - Works and in good condition

5
Owatonna Tool Company Sealant Dispenser
Air Driven - Model 7055 - Good condition

6
Electric Makita Angel Drill
Model DA3000 - Variable speed 3/8" - 10 mm (3/8") chuck. Measures 3-1/2" from tip of chuck to widest portion of tool body. Variable speed (0-1,400 RPM) for easy starting and accurate hold positioning. Ball bearing construction for long tool l

7
Impact Wrench- Rodac Air Power
5/8" drive - Model 676

8
6' Range Cord
Carol - 8 guage - 4 wire - 240 volt

9
Snap-On Tools
CJ-85-1 Bearing/Gear Puller plus….

10
Selection of four gear bearing puller
Drive bolt missing on one


12
Variety of Screws for puller
Six total - See photos

13
Selection of five pullers
One has screw missing - See photos



16
Four pullers
See photos -- one has screw missing




20
Two Pullers
See photos - Larger one is a Snap-on

21
Weller Soldering Gun
Model 8200N - Works

22
Four Hammers
Small sledge hammer, brasshead hammer, ballping hammer, etc.

23

24
Central Machinery 10" Table Saw
Model 97896 - 2.4 Horsepower - 120 Volt - 5000 rpm - Works - One saw blade in machine, another included

25
Snap-on gear and bearing puller kit
Not all inside are snap-on. Very large.

26
Micrometer & Vintage Gauging Tool
Both in original boxes

27
Snap-On Emergency Ignition System
See photos - Not tested, cord frayed, needs to be fixed

28
Four Spreader Sleeves
See photos - Screw missing on one


30
All Power Spring Compressor Kit w/ pliers
6 sizes spring compressors & pliers


32




36
Central Tool Company Guage in Original Box
Vintage guage in original box



39
Snap-On Cylinder Shorting Expanded Scale Tachomet
MT460 - See photos - Has not been tested


41
Assortment of household items
Fire Extenguisher, Propane Torch, Ropes, Non-Locking Interior Door Kit - Not Available for Shipping

42
Submersible Pump Control Box & Dryer Cord Outlet
Franklin Electric and Slater Brands

43
Napa Soldering Gun with Case
Works - Trig-R-Heat 1000 Degrees F - 150 and 400 watts 1/4" pyramid trip worklight, 120 VAC, High Performance Tool for medium and heavy duty general purpose soldering. - Model 770-2527

44
Snap-on Air Conditioning Gauge
Snap-on Air Conditioning Guages made by Tiff - R22, R12, and R502 - Hoses are approximately 6"

45
Oxygen Acetylene Torch Kit
Includes guages, hoses and torch


47
Radnor Soldering Rods - 6 included
General Purpose Brazing Alloy - See photos - 3' long

48
Mild Steel Gas Welding Rods - 11 included
High Quality Oxygen Acetylene

49
Dewalt Table Saw
Works DW871 - Serial Number 266769 - 10"

50
Oxygen Acetylene Hose
Approximately 40-50 feet long

51
Assortment of Gloves, socks and gloves
Gloves, insulated pants, socks, welding gloves, and tool belt





56
Japan Micrometer
50-75 mm - In wooden box - Vintage

57
Blind Fastener Installation Kit
for General Motors Products - D-100-4FBA


59
Digital Micrometer
Japan Micrometer Series 550

60
Central Tool Company Gauge Kit
See photos - Original Box

61
NSK Micrometer
See photos

62
DL106 Automotive Meter with case and instruction m
Hand held, battery operated instrument used for testing and trouble shooting automotive electronic systems.


64
Ratabraach Heavy Duty Hole Maker
Part No GA219A7 - sizes 5/17 thru 3/4

65
Assortment of Carpet Tools
Carpet Cutters, Spline Tool, Ridgid, etc.



68
Textron Lag Screws
Assorted sizes lag screws

69
Pair of 6" C-Clamps
Like New - See photos




73
Bearing/Gear Puller Bolts and Pins
Large Assortment - See photos


75
Soldering Gun,Battery Screwdriver,2 Thread Repair
Screwdriver works but soldering gun does not


77
Bearing/Gear Pulling Tools
See photos - 3 pieces

78
Assortment of Tools
Wrenches, Screwdriver, Punch and more



81
Magnifying Glass/Light
Works - See photos

82
Assortment of Large Tools & PartsFor Gear/Bearing
Includes Extension Hook, Jack parts, etc. - Tape Measurer not included


84
Assortment of Tools for welders
Torches and other items, see photos

85
Two multi-drawer boxes full of screws and misc. it
Lots to offer in this one. Full of items for your workshop.



88
Drawer Full of Chemical Products
Including Wood Filler, Grease, Bead Goop, etc. - No shipping available - Cabinet not included

89
Drawer Full of Misc Oils
Including Gear Oil, Shock Oil, Small Matt Gas Torch, etc. - No shipping available - Cabinet not included

90
Drawer Full of Misc Oils
Including Oil, grease, and miscellaneous sprays - No shipping available - Cabinet not included

91
3-Drawer Metal Workshop Cabinet w/ Butcherblock St
3' Hx18"Wx24"D - does not includes items inside

92
Selection of Various types of tape and 12" Miter
includes electrical, plumbing and other tape as well as the miter box





97
6.5 Gallon parts washer loaded with sprays and tir
See photos - No shipping available

98
GM Connector Adaptor and Multi-Drawer Box
Electrical connectors inside multi-drawer box


100
16" Lawnmower Blades - 3
See photos - Measuring Tape Not Included


102
Homemade Extra Fuel Tank
Approximately five gallon tank

103
NAPA Fleet 2 ton floor jack
Very good condition - See photos - VERY HEAVY

104
SnapOn 12-drawer Tool Chest - Red
Very Good Condition - Fold up top - 32.5"Wx18"Dx18.25"H - Closed

105
NAPA 10-drawer Roll About Tool Chest - Red
Heavy Duty Snap-on Vice Attached as well as 1/4" steel plate on top, chain included - 46"Wx26"Dx38"H -

106
Engine Hoist
See photos


108
Set of 2 Pipe Wrenches
10" and 14" - See photos

109
TorqOMeter Wrench
3/4" drive - Untested


111

112
Three large screwdrivers
One end of one has been altered - See photos



115
Dozen Ratcheting Wrenches
Includes some Mac

116
Mac Tools Impact Chisel
See photos - Not Tested

117
Small Drill Bits in box & Small screwdrivers
Large Assortment of sizes- See photos

118
AirDriven Buffer with extra pads
See photos - Not Tested

119
Two SnapOn Wratchet/Wrench and Extension
3 Extensions - 1/4" - See photos


121
Four Pry Bars
Assorted size

122
18 Wrenches - Various Sizes
Some Mac - Some SnapOn

123
10 Wrences - Various Size
Some Mac - Some SnapOn

124
9 Wrenches - Various Sizes
Craftsman and SnapOn

125
SnapOn 3/8" Impact Tool - Air Driven
With Protective Leather Case - Not Tested


127


129

130

131
Four Hand Tools
See photos

132
Trio of Heavy Equipment Tools
Gear Puller and more!





137
Rodac Air Powered Drill
Model Number 211C - Not tested - see photos - No fitting


139
MAC Air Powered Drill with hose
Maximum spead of 20K RPM - Not tested


141
Air Powered Cutter
Not tested - see photos

142
Homemade Weed Burner with Torch
Has some propane in the tank - Not Available for Shipping


144
Rodac Air Powered Impact Tool
See photo - Not Tested - No Fitting


146
Snap On SVT270 Vacuum Pump Test Gun
Diagnostic Service Tool - Compression and Vacuum Tester - Not Tested


148
Hand Tools - 4
See photos

149
Hand Tools - 4
See photos

150
Hand Tools - 4
See photos






156
Snap On - Set of 2 Ratcheting Wrenches
7/8" and 18 mm Ratcheting Wrenches


158
NAPA Impact - 1/2" Drive Deep Well Sockets
Large heavy duty - see photos



161
Snap On 1/2" drive sockets
Some metric some standard



164
Snap On 1/4" drive
Some standard and some deep well

165
Allen wrench set
1/4" and 3/8" - some are MSC

166
Allen wrench set
1/4" and 3/8" Mostly Snap On

167
1/4" drive - Metric Socket Set
Blend of Craftsman, SnapOn


169
SnapOn and Other 3/8" and 1/4" drives
Sockets - See photos - Some metric and some standard

170
MAC Swivel Sockets
1/2" drive - See photos


172
3/8" drive - 3 extensions and two tools
MAC Ratchet - Wrench Snap On


174



177
Snap On 3/8" drive pair of ratchets
One curved handle and swivel head and other is ridgid

178
Pair of Footrests for Motorcycle ?
See photos - Brand new - never used

179
Cooling System Tester
Not tested - See photos

180
Torx Bits Sockets
Partly 3/8" and 1/4" drive - Some Snap On and some MAC


182
Snap On 1/4" drive sockets
various bits - see photos

183
Snap On 1/4" and 3/8" drive sockets
various bits - see photos


185
3/8" Drive Mix of Sockets
MAC, SnapOn, etc. - 3 sockets possibly two sided?


187
Snap On 250PSI Kilopascal Compression Gauge
Vintage Parts Tool with and two additional parts included




191
Large selection of various hand tools
Including Staple Gun, Crimping Tools, etc. - Measuring Tape NOT Included


193

194
3/8" drive sockets and extensions
Various sockets and extensions

195
Various Tools
Mostly Snap On - Measuring Tape Not Included

196
Various Tools
See photos - Measuring Tape Not Included

197
Selection of Various Drive Sockets
Mostly Snap On - Measuring Tape Not Included

198
Various Tools
See photos - Measuring Tape Not Included

199
Large Selection Box end and Open end wrenches - Sm
See photos - Measuring Tape Not Included

200
Small (8) ratcheting wrenches
See photos - Measuring Tape Not Included

201
Large Assortment of Hand tools
Measuring Tape Not Included - See photos

202
Large Assortment of Tools
Numberous Thread Repair Kits, etc. - Measuring Tape Not Included - See photos

203
3 spools of solder and box of brass studs
See photos - Measuring Tape Not Included

204
Fiamm - Set of Motorcycle (?) Horns
Made in Italy - See photos

205
3/4" Drive Sockets
Mostly 3/4" inch but there are a couple other sizes as well - Variety of Brands

206
Evercraft Box End and Open End Wrenches
Set of 3 - Large - See photos - Measuring Tape Not Included

207
Pair of Evercraft Box End and Open End Wrenches
Set of 2 - Large - See photos - Measuring Tape Not Included

208
Pair of Evercraft Box End and Open End Wrenches
Set of 2 - Large - See photos - Measuring Tape Not Included

209
Large Assortment of 3/4" Drive Sockets (Mostly)
See photos - Measuring Tape Not Included

210
Large Assortment of 3/4" Drive Sockets (Mostly)
See photos - Measuring Tape Not Included

211
Pair of Air Powered Tools
See photos - Measuring Tape Not Included

212
Large Assortment of 3/4" Drive Sockets (Mostly)
See photos - Measuring Tape Not Included

213
Large Bucket full of miscellaeous items
See photos - Measuring Tape Not Included

214
Large assortment of miscellaneous tools
See photos - Measuring Tape Not Included

215
Large assortment of miscellaneous tools inc. Tubin
See photos - Measuring Tape Not Included

216
Large assortment of miscellaneous tools
See photos - Measuring Tape Not Included

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Estate auction of Tools!
 Online Only Auction
Auction Date(s)
Bidding Starts: Sunday Aug 12
Bidding Ends: Sunday Aug 12
Auction Location

Knoxville, TN 37923
Company
JD's Realty & Auction

Contact: Jason Deel
Phone: 865-264-4641
Website: www.jdsauctions.com

Listing Terms and Conditions
Terms and Conditions of the Sale: T1) All items offered for sale at the Auction ("Items", "Property", "Product", "Purchases") subject to the following Terms and Conditions of Sale, which, combined with each Auction's specific terms as posted in materials and on the web, make up the Complete Terms and Conditions of Sale. T1a). Notice given JD's Auctions LLC and Auctioneers have the right in accordance with Tennessee State law to bid on this and any other auction for their purpose or on behalf of the Property owners or the estate. T2) All items are being sold As-Is with no warranty. Auctioneer shall not be responsible for the correct description, authenticity, genuineness of, or defect in any lot, and makes no warranty in connection therewith. On-site inspection of items being sold is recommended. Auctioneer makes every effort to provide accurate information about the items being sold. However, neither Auctioneer nor its Client will assume responsibility for Buyer's bidding errors. It is Buyers' full responsibility to confirm the accuracy of items offered for sale. Buyers are recommended to inspect all items. Descriptions and photos are offered as a guide only. Do not rely solely on photos to make buying decisions, be sure to read descriptions, and ask questions if you are unclear. Auctioneer shall not be held responsible for such errors as posting the wrong photo for an item. When in doubt about the condition of an item, please bid accordingly. You may preview all of the items for auction on the first and third Saturday starting at 11am. In case of an online-only auction, items may be previewed the Friday (10am-4pm) before the auction is set to close or as prescribed by the auctioneer. T2a). Bidder understands and agrees that this agreement and all rights of the parties there-under, shall be governed by the laws of the County of Anderson, State of Tennessee and any action brought by either party shall be brought in the Courts of the State of Tennessee. In the event, that for any reason, the forum is deemed to be sufficiently inconvenient or the agreement on the forum selection is unenforceable it is still the intention of the parties that the Laws of the State of Tennessee govern the parties agreement and their rights attended thereto. Buyer agrees that any legal filed action will take place within the county of Anderson, City of Clinton, State of Tennessee. T3) ALL SALES ARE FINAL. A successful bid at auction, whether live or online, constitutes a legally binding contract of sale. All sales are final. There will be no refunds, returns or exchanges. T4) Absence of Warranties. The condition of the items being offered varies. The Buyer understands and agrees: (1) that any description or sample of the items given or furnished by Auctioneer is solely for identification, and does not create any warranty expressed or implied, that the item actually conforms to such description or sample, (2) that Buyer or agent on Buyer's behalf has inspected or has had the opportunity to inspect, all of the items upon which Buyer will be bidding and/or does purchase, (3) that all items are purchased and accepted by Buyer "AS IS", "WHERE IS" and "WITH ALL FAULTS". AUCTIONEER MAKES NO WARRANTIES OR GUARANTEES WHATSOEVER WHETHER WRITTEN, ORAL OR IMPLIED AS TO QUALITY, AUTHENTICITY, QUANTITY, CONDITION, USEABILITY, SALEABILITY, WEIGHT, MEASUREMENT, YEAR, MODEL, MECHANICAL CONDITION, PERFORMANCE, OR OTHER SPECIFICATIONS, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR WARRANTY AGAINST PATENT, TRADEMARK, COPYRIGHT OR TRADE SECRET INFRINGEMENT, (4) in the event there are manufacturer warranties in effect for the item purchased, Buyer must make all claims thereunder directly with the provider of the warranty. No statement or statements of any other paragraph herein shall be construed to in any way contradict the provisions of this paragraph. T5) Bidder's Number. The bidder's number is nontransferable. All bids, online or in-house, made using the bid number will be the responsibility of the Buyer. T6) Failure to Remove Purchases. In the event items are not removed within three (3) business days after the auction(s) end OR freight/large items shipping information has not been received within five (5) business days after the full payment of the item(s), the items purchased shall be deemed abandoned and Buyer will lose any right, title, or interest Buyer may have acquired and the items shall revert and repossess to Auctioneer without further notice to Buyer. Auctioneer shall also be entitled to any costs associated with the removal, storage and reselling of Buyer's items, and any other charges, fees, and expenses incurred as a result of Buyer's failure, including all attorney fees and costs incurred by Auctioneer to enforce Buyer's obligations hereunder. T7) Buyer's Premium Online buyer's premium is 15%, there is a 3% credit card surcharge. Payment: P1) By agreeing to our terms and conditions you agree to allow us to charge the credit card on file if you are the winner upon close of the auction. P2) Local bidders, you may pay with a personal or cashier's check. You must contact the office prior to the close of the auction and indicate that you will pay with cash or check. You may also pick up your items or have them shipped. If you are a TN resident, please contact the office if you would like your item(s) shipped. P3) We accept all major credit cards. P4) NONPAYMENT Any declined credit card payment will have two (2) business days to contact the office (865-264-4641) and pay with a valid credit card. If payment has not be successfully received with two (2) business days, you will no longer be authorized to bid at JD's Auctions and negative feedback left. P5) Verbal/written "cancellations" JD's does not recognize or accept cancellations for any item for any reason won at auction. If the winning bidder decides to "cancel" an item it will be treated as a nonpayment (see P8). If a winning bidder decides to "cancel" an item after it has been paid for, there will be no refunds, no exceptions. P10) Personal Information It is vital that your personal information (name, address, phone number, and email) are correct. We ship and contact using that information and if it not correct, delays will occur. JD's Auctions is not responsible for correcting your information and is not responsible for any delays or incorrect delivery of items due to incorrect personal information. Please contact the office if you would like to verify your information: 865-264-4641. Shipping: S1) Buyer to pay all shipping charges. Shipping will be added to the total cost of the item(s) (hammer price + buyer's premium + sales tax (if applicable). Our third-party shippers do not invoice but contact you directly via phone or email for payment processing. Please contact them directly with any shipping questions, claims, or quotes. We use The Mail Center ETC. If you are unsure where your item may have been sent for shipping, please contact the office @ 865-264-4641. The Mail Center ETC Teresa or Ashley 865-483-4177 S2) Large, extremely fragile, & freight shipping Buyer has five (5) business days to contact the office (865-264-4641) with shipping arrangements (name of shipper, contact information, and pickup timeline). All exceptionally large or irregularly shaped items will be packaged through UPS Packing and shipped via UPS. Furniture, large signs, or extra large pieces may require freight (anything over 110lbs packaged). We have shipped using two companies: Rancho Buck out of Atlanta, GA, and UShip.com. If freight or third-party shipping is needed, it is the responsibility of the buyer to coordinate and pay for all shipping. Please contact us prior to bidding with any shipping questions. Any buyer who fails to provide this information will fall under: Failure to Remove Items (para T6) Rancho Buck 404-524-9122 Uship.com S3) In-house shipping We no longer provide in-house shipping. S4) Non-Payment of Shipping If the buyer refuses or does not wish to pay for shipping or will not pick up the winning items, JD's Auctions will not refund the purchase for any reason. The buyer can then become a consignor and consign the item(s) with JD's Auctions. A contract will be sent via email for the buyer to review and sign. The contract must be scanned and emailed back to us or mailed. The buyer has five (5) days to return the signed contract. When the contract is received, JD's Auctions will lot the item in an auction. If the contract is NOT received within five (5) days, the items will be deemed abandoned and become the sole property of JD's Auctions (para T6). S5) INTERNATIONAL BUYERS You are responsible for any and all customs fees in addition to USPS International First Class or USPS International Priority Mail costs. Depending on the item, UPS/FedEx International may be used to ship your winning item(s) S6) FIREARMS All firearms purchased at auction by a non-Tennessee resident must have that firearm(s) shipped to an FFL holder. It is the buyer's responsibility to pay for all shipping, background check, and transfer fees. Please contact the office (865-264-4641) and provide the contact information for your preferred FFL. All handguns will be shipped UPS. Long guns may be shipped USPS or UPS, depending on lowest cost or buyer's preference.
Bidding is now open, place your bid today!

1
Makita 1/2" Drill with Handle - Electric
Model 6302 - 120 Volts - Couple of nicks in the insultation in the cords - Works

2
Sears Craftsman Saber Saw
Quarter Horsepower - Double insulated - 5/8" stroke - Works

3
1/4" Air Hydraulic Riveter - Central Pneumatics
90-120 PSI Air Pressure - Air Consumption: 4.5 CFM @ 90PSI - Item 98898 - Air Inlet 1/4"-18 NPT

4
Makita Electric Drill
Model 6821 - Works and in good condition

5
Owatonna Tool Company Sealant Dispenser
Air Driven - Model 7055 - Good condition

6
Electric Makita Angel Drill
Model DA3000 - Variable speed 3/8" - 10 mm (3/8") chuck. Measures 3-1/2" from tip of chuck to widest portion of tool body. Variable speed (0-1,400 RPM) for easy starting and accurate hold positioning. Ball bearing construction for long tool l

7
Impact Wrench- Rodac Air Power
5/8" drive - Model 676

8
6' Range Cord
Carol - 8 guage - 4 wire - 240 volt

9
Snap-On Tools
CJ-85-1 Bearing/Gear Puller plus….

10
Selection of four gear bearing puller
Drive bolt missing on one

11

12
Variety of Screws for puller
Six total - See photos

13
Selection of five pullers
One has screw missing - See photos

14

15

16
Four pullers
See photos -- one has screw missing

17

18

19

20
Two Pullers
See photos - Larger one is a Snap-on

21
Weller Soldering Gun
Model 8200N - Works

22
Four Hammers
Small sledge hammer, brasshead hammer, ballping hammer, etc.

23

24
Central Machinery 10" Table Saw
Model 97896 - 2.4 Horsepower - 120 Volt - 5000 rpm - Works - One saw blade in machine, another included

25
Snap-on gear and bearing puller kit
Not all inside are snap-on. Very large.

26
Micrometer & Vintage Gauging Tool
Both in original boxes

27
Snap-On Emergency Ignition System
See photos - Not tested, cord frayed, needs to be fixed

28
Four Spreader Sleeves
See photos - Screw missing on one

29

30
All Power Spring Compressor Kit w/ pliers
6 sizes spring compressors & pliers

31

32

33

34

35

36
Central Tool Company Guage in Original Box
Vintage guage in original box

37

38

39
Snap-On Cylinder Shorting Expanded Scale Tachomet
MT460 - See photos - Has not been tested

40

41
Assortment of household items
Fire Extenguisher, Propane Torch, Ropes, Non-Locking Interior Door Kit - Not Available for Shipping

42
Submersible Pump Control Box & Dryer Cord Outlet
Franklin Electric and Slater Brands

43
Napa Soldering Gun with Case
Works - Trig-R-Heat 1000 Degrees F - 150 and 400 watts 1/4" pyramid trip worklight, 120 VAC, High Performance Tool for medium and heavy duty general purpose soldering. - Model 770-2527

44
Snap-on Air Conditioning Gauge
Snap-on Air Conditioning Guages made by Tiff - R22, R12, and R502 - Hoses are approximately 6"

45
Oxygen Acetylene Torch Kit
Includes guages, hoses and torch

46

47
Radnor Soldering Rods - 6 included
General Purpose Brazing Alloy - See photos - 3' long

48
Mild Steel Gas Welding Rods - 11 included
High Quality Oxygen Acetylene

49
Dewalt Table Saw
Works DW871 - Serial Number 266769 - 10"

50
Oxygen Acetylene Hose
Approximately 40-50 feet long

51
Assortment of Gloves, socks and gloves
Gloves, insulated pants, socks, welding gloves, and tool belt

52

53

54

55

56
Japan Micrometer
50-75 mm - In wooden box - Vintage

57
Blind Fastener Installation Kit
for General Motors Products - D-100-4FBA

58

59
Digital Micrometer
Japan Micrometer Series 550

60
Central Tool Company Gauge Kit
See photos - Original Box

61
NSK Micrometer
See photos

62
DL106 Automotive Meter with case and instruction m
Hand held, battery operated instrument used for testing and trouble shooting automotive electronic systems.

63

64
Ratabraach Heavy Duty Hole Maker
Part No GA219A7 - sizes 5/17 thru 3/4

65
Assortment of Carpet Tools
Carpet Cutters, Spline Tool, Ridgid, etc.

66

67

68
Textron Lag Screws
Assorted sizes lag screws

69
Pair of 6" C-Clamps
Like New - See photos

70

71

72

73
Bearing/Gear Puller Bolts and Pins
Large Assortment - See photos

74

75
Soldering Gun,Battery Screwdriver,2 Thread Repair
Screwdriver works but soldering gun does not

76

77
Bearing/Gear Pulling Tools
See photos - 3 pieces

78
Assortment of Tools
Wrenches, Screwdriver, Punch and more

79

80

81
Magnifying Glass/Light
Works - See photos

82
Assortment of Large Tools & PartsFor Gear/Bearing
Includes Extension Hook, Jack parts, etc. - Tape Measurer not included

83

84
Assortment of Tools for welders
Torches and other items, see photos

85
Two multi-drawer boxes full of screws and misc. it
Lots to offer in this one. Full of items for your workshop.

86

87

88
Drawer Full of Chemical Products
Including Wood Filler, Grease, Bead Goop, etc. - No shipping available - Cabinet not included

89
Drawer Full of Misc Oils
Including Gear Oil, Shock Oil, Small Matt Gas Torch, etc. - No shipping available - Cabinet not included

90
Drawer Full of Misc Oils
Including Oil, grease, and miscellaneous sprays - No shipping available - Cabinet not included

91
3-Drawer Metal Workshop Cabinet w/ Butcherblock St
3' Hx18"Wx24"D - does not includes items inside

92
Selection of Various types of tape and 12" Miter
includes electrical, plumbing and other tape as well as the miter box

93

94

95

96

97
6.5 Gallon parts washer loaded with sprays and tir
See photos - No shipping available

98
GM Connector Adaptor and Multi-Drawer Box
Electrical connectors inside multi-drawer box

99

100
16" Lawnmower Blades - 3
See photos - Measuring Tape Not Included

101

102
Homemade Extra Fuel Tank
Approximately five gallon tank

103
NAPA Fleet 2 ton floor jack
Very good condition - See photos - VERY HEAVY

104
SnapOn 12-drawer Tool Chest - Red
Very Good Condition - Fold up top - 32.5"Wx18"Dx18.25"H - Closed

105
NAPA 10-drawer Roll About Tool Chest - Red
Heavy Duty Snap-on Vice Attached as well as 1/4" steel plate on top, chain included - 46"Wx26"Dx38"H -

106
Engine Hoist
See photos

107

108
Set of 2 Pipe Wrenches
10" and 14" - See photos

109
TorqOMeter Wrench
3/4" drive - Untested

110

111

112
Three large screwdrivers
One end of one has been altered - See photos

113

114

115
Dozen Ratcheting Wrenches
Includes some Mac

116
Mac Tools Impact Chisel
See photos - Not Tested

117
Small Drill Bits in box & Small screwdrivers
Large Assortment of sizes- See photos

118
AirDriven Buffer with extra pads
See photos - Not Tested

119
Two SnapOn Wratchet/Wrench and Extension
3 Extensions - 1/4" - See photos

120

121
Four Pry Bars
Assorted size

122
18 Wrenches - Various Sizes
Some Mac - Some SnapOn

123
10 Wrences - Various Size
Some Mac - Some SnapOn

124
9 Wrenches - Various Sizes
Craftsman and SnapOn

125
SnapOn 3/8" Impact Tool - Air Driven
With Protective Leather Case - Not Tested

126

127

128

129

130

131
Four Hand Tools
See photos

132
Trio of Heavy Equipment Tools
Gear Puller and more!

133

134

135

136

137
Rodac Air Powered Drill
Model Number 211C - Not tested - see photos - No fitting

138

139
MAC Air Powered Drill with hose
Maximum spead of 20K RPM - Not tested

140

141
Air Powered Cutter
Not tested - see photos

142
Homemade Weed Burner with Torch
Has some propane in the tank - Not Available for Shipping

143

144
Rodac Air Powered Impact Tool
See photo - Not Tested - No Fitting

145

146
Snap On SVT270 Vacuum Pump Test Gun
Diagnostic Service Tool - Compression and Vacuum Tester - Not Tested

147

148
Hand Tools - 4
See photos

149
Hand Tools - 4
See photos

150
Hand Tools - 4
See photos

151

152

153

154

155

156
Snap On - Set of 2 Ratcheting Wrenches
7/8" and 18 mm Ratcheting Wrenches

157

158
NAPA Impact - 1/2" Drive Deep Well Sockets
Large heavy duty - see photos

159

160

161
Snap On 1/2" drive sockets
Some metric some standard

162

163

164
Snap On 1/4" drive
Some standard and some deep well

165
Allen wrench set
1/4" and 3/8" - some are MSC

166
Allen wrench set
1/4" and 3/8" Mostly Snap On

167
1/4" drive - Metric Socket Set
Blend of Craftsman, SnapOn

168

169
SnapOn and Other 3/8" and 1/4" drives
Sockets - See photos - Some metric and some standard

170
MAC Swivel Sockets
1/2" drive - See photos

171

172
3/8" drive - 3 extensions and two tools
MAC Ratchet - Wrench Snap On

173

174

175

176

177
Snap On 3/8" drive pair of ratchets
One curved handle and swivel head and other is ridgid

178
Pair of Footrests for Motorcycle ?
See photos - Brand new - never used

179
Cooling System Tester
Not tested - See photos

180
Torx Bits Sockets
Partly 3/8" and 1/4" drive - Some Snap On and some MAC

181

182
Snap On 1/4" drive sockets
various bits - see photos

183
Snap On 1/4" and 3/8" drive sockets
various bits - see photos

184

185
3/8" Drive Mix of Sockets
MAC, SnapOn, etc. - 3 sockets possibly two sided?

186

187
Snap On 250PSI Kilopascal Compression Gauge
Vintage Parts Tool with and two additional parts included

188

189

190

191
Large selection of various hand tools
Including Staple Gun, Crimping Tools, etc. - Measuring Tape NOT Included

192

193

194
3/8" drive sockets and extensions
Various sockets and extensions

195
Various Tools
Mostly Snap On - Measuring Tape Not Included

196
Various Tools
See photos - Measuring Tape Not Included

197
Selection of Various Drive Sockets
Mostly Snap On - Measuring Tape Not Included

198
Various Tools
See photos - Measuring Tape Not Included

199
Large Selection Box end and Open end wrenches - Sm
See photos - Measuring Tape Not Included

200
Small (8) ratcheting wrenches
See photos - Measuring Tape Not Included

201
Large Assortment of Hand tools
Measuring Tape Not Included - See photos

202
Large Assortment of Tools
Numberous Thread Repair Kits, etc. - Measuring Tape Not Included - See photos

203
3 spools of solder and box of brass studs
See photos - Measuring Tape Not Included

204
Fiamm - Set of Motorcycle (?) Horns
Made in Italy - See photos

205
3/4" Drive Sockets
Mostly 3/4" inch but there are a couple other sizes as well - Variety of Brands

206
Evercraft Box End and Open End Wrenches
Set of 3 - Large - See photos - Measuring Tape Not Included

207
Pair of Evercraft Box End and Open End Wrenches
Set of 2 - Large - See photos - Measuring Tape Not Included

208
Pair of Evercraft Box End and Open End Wrenches
Set of 2 - Large - See photos - Measuring Tape Not Included

209
Large Assortment of 3/4" Drive Sockets (Mostly)
See photos - Measuring Tape Not Included

210
Large Assortment of 3/4" Drive Sockets (Mostly)
See photos - Measuring Tape Not Included

211
Pair of Air Powered Tools
See photos - Measuring Tape Not Included

212
Large Assortment of 3/4" Drive Sockets (Mostly)
See photos - Measuring Tape Not Included

213
Large Bucket full of miscellaeous items
See photos - Measuring Tape Not Included

214
Large assortment of miscellaneous tools
See photos - Measuring Tape Not Included

215
Large assortment of miscellaneous tools inc. Tubin
See photos - Measuring Tape Not Included

216
Large assortment of miscellaneous tools
See photos - Measuring Tape Not Included