00

Information Lot
Welcome to Bill Hanks Lumber Co. Liquidation Auction!


Auction Schedule is as follows:
Announcements begin at 8:45 am EST. All announcements day of sale take precedence over all written advertising.

Lot #1-499 and the lots 1100 of Kiln Dried Rough Sawn Lumber will sell on Thursday, August 15th beginning at 9 am. The lumber lots will be divided into detailed lots selling at the end of day,Thursday.

Lot #500-1099 will be sold on Friday beginning at 9am. August 16th. At NOON, we will begin the ROLLING STOCK regardless of what lot we are on at that time.
Tune in for complete details at 8:45 am on day of sale.


Smalls and palletized items will be given 7 days for removal.
Majority of Equipment will be given 30 days for removal. The Sorter will be given 60 days for removal.
Real Estate to close in 120 days.


Bill Hanks Lumber equipment was EXTREMELY well maintained. You will understand this when you see the WELL stocked parts rooms (of which will also be sold) As you will see there is fire damage to some of the equipment in the main sawmill building. We did our best to note any fire damage in the descriptions but still encourage you to inspect all equipment yourself. Again this was ONLY in the sawmill building. The debarker line, trimsaw/sorter line, chipper line and ALL the rolling stock was untouched by the fire.
YOU WILL NOT BE DISAPPOINTED IN THE QUALITY HERE!
 

1

Real Estate- Tract 1
26.28 acres approximately. Buyer is to receive title free and clear by warranty deed. Much of this tract is in hard yard Currently contains large sawmill buildings which can be purchased separately in the equipment auction Beautiful office building Parts building If Tract 1 is sold separately from Tract 3, Tract 3 will have a 50' easement across Tract 1 on the driveway out to the road. PLEASE NOTE: FOR REAL ESTATE BUYERS WHO CANNOT BE ONSITE:  Real estate portion of auction will be broadcast to viewers via online bidding sites. However, if you wish to bid on the real estate (Lots 1-11) you will need to do so via phone. Your registration on the online bidding sites will suffice, but due to multiple possible combinations, we will need to have you on the phone with one of our staff to place bids. Phone numbers to use: Zach 931.224.0699 Jackie:931.698.3342 Eugene: 260.350.8953 Jonathon: 574.349.4380 Mel: 574.238.9469 Bill Hanks Real Estate flier.pdf

2

Real Estate -Tract 2
6.85 acres approximately. Buyer is to receive title free and clear by warranty deed. Located on both sides of Piney Grove Church Road Tract 2 would be an excellent addition to any of the other tracts, or can be purchased by itself PLEASE NOTE: FOR REAL ESTATE BUYERS WHO CANNOT BE ONSITE: Real estate portion of auction will be broadcast to viewers via online bidding sites. However, if you wish to bid on the real estate (Lots 1-11) you will need to do so via phone. Your registration on the online bidding sites will suffice, but due to multiple possible combinations, we will need to have you on the phone with one of our staff to place bids. Phone numbers to use: Zach 931.224.0699 Jackie:931.698.3342 Eugene: 260.350.8953 Jonathon: 574.349.4380 Mel: 574.238.9469 Bill Hanks Real Estate flier.pdf

3

Real Estate- Tract 3
Tract 3 19 acres approximately. Buyer is to receive title free and clear by warranty deed. Much of this Tract is in hard yard Sells with approximately 49,000 sf of buildings including Building 1: 80x120 Building 2: 120x240 main part plus 40x40 bumpout Building 3: 60x100 Garage: 50x60 This tract also contains the dry kilns and boilers offered in Tracts 4-11 that can be purchased with Tract 3 or purchased separately and removed. There is an old 30' easement along the east property line from the road to the rear of the property. It appears never to have been used. PLEASE NOTE: FOR REAL ESTATE BUYERS WHO CANNOT BE ONSITE: Real estate portion of auction will be broadcast to viewers via online bidding sites. However, if you wish to bid on the real estate (Lots 1-11) you will need to do so via phone. Your registration on the online bidding sites will suffice, but due to multiple possible combinations, we will need to have you on the phone with one of our staff to place bids. Phone numbers to use: Zach 931.224.0699 Jackie:931.698.3342 Eugene: 260.350.8953 Jonathon: 574.349.4380 Mel: 574.238.9469 Bill Hanks Real Estate flier.pdf

4

Converta Kilns #1 & #2
Double Track Feed Through Dry Kiln, Capacity Average 50 MBF Each, Iosvert -130 G2 Plus Variable Feed Controls on Each Kiln, Challenger 63 KVA Transformer, 100 AMP Disconnect for Each Kilns, System Pressure Detector PLEASE NOTE: FOR REAL ESTATE BUYERS WHO CANNOT BE ONSITE: Real estate portion of auction will be broadcast to viewers via online bidding sites. However, if you wish to bid on the real estate (Lots 1-11) you will need to do so via phone. Your registration on the online bidding sites will suffice, but due to multiple possible combinations, we will need to have you on the phone with one of our staff to place bids. Phone numbers to use: Zach 931.224.0699 Jackie:931.698.3342 Eugene: 260.350.8953 Jonathon: 574.349.4380 Mel: 574.238.9469

5

Brunner Hildebrand Kilns #3 & #4 50 MBF Each
Double Track, 50 MBF Each, Feed Through Dry Kilns, Added 3 & 4 SII Heat Vent Spray & Fan Controls, Capacity Average 50 MBF Ea. W/ Tosovert 132 G2 Variable Feed Controllers Each W/ TCI Motion Shield Protector, 100 AMP Disconnect for Each Kiln PLEASE NOTE: FOR REAL ESTATE BUYERS WHO CANNOT BE ONSITE: Real estate portion of auction will be broadcast to viewers via online bidding sites. However, if you wish to bid on the real estate (Lots 1-11) you will need to do so via phone. Your registration on the online bidding sites will suffice, but due to multiple possible combinations, we will need to have you on the phone with one of our staff to place bids. Phone numbers to use: Zach 931.224.0699 Jackie:931.698.3342 Eugene: 260.350.8953 Jonathon: 574.349.4380 Mel: 574.238.9469

6

SII Package Kilns #5 & #6 90 MBF Each
Job #712, (2) Boxes Approx. 90+ MBF Kiln Capacity, Size Eddie W/ Toshiba G3 Variable Feed Controls W/ SII Controls for Forward/Reverse Heat, Vent, Spray and Fans, Includes 56RS Mistifyer PLEASE NOTE: FOR REAL ESTATE BUYERS WHO CANNOT BE ONSITE: Real estate portion of auction will be broadcast to viewers via online bidding sites. However, if you wish to bid on the real estate (Lots 1-11) you will need to do so via phone. Your registration on the online bidding sites will suffice, but due to multiple possible combinations, we will need to have you on the phone with one of our staff to place bids. Phone numbers to use: Zach 931.224.0699 Jackie:931.698.3342 Eugene: 260.350.8953 Jonathon: 574.349.4380 Mel: 574.238.9469

7

English Boiler
Richmond, VA 400 HP 150 PSI Attached Auger Stocker Feed PLEASE NOTE: FOR REAL ESTATE BUYERS WHO CANNOT BE ONSITE: Real estate portion of auction will be broadcast to viewers via online bidding sites. However, if you wish to bid on the real estate (Lots 1-11) you will need to do so via phone. Your registration on the online bidding sites will suffice, but due to multiple possible combinations, we will need to have you on the phone with one of our staff to place bids. Phone numbers to use: Zach 931.224.0699 Jackie:931.698.3342 Eugene: 260.350.8953 Jonathon: 574.349.4380 Mel: 574.238.9469

8

Superior Boiler Works 150 PSI Package boiler
4-X1024 w/ updraft or Gi Fan,  w, Lockwood Products recirculating tank with 15 HP Water Reclaim pump PLEASE NOTE: FOR REAL ESTATE BUYERS WHO CANNOT BE ONSITE: Real estate portion of auction will be broadcast to viewers via online bidding sites. However, if you wish to bid on the real estate (Lots 1-11) you will need to do so via phone. Your registration on the online bidding sites will suffice, but due to multiple possible combinations, we will need to have you on the phone with one of our staff to place bids. Phone numbers to use: Zach 931.224.0699 Jackie:931.698.3342 Eugene: 260.350.8953 Jonathon: 574.349.4380 Mel: 574.238.9469

9

Allen-Bradley Centerline Control
600 AMP MCC for Water Feed Pumps, Rotary Valves and ID Fan W/ Water Conditioning System, Square D 400 AMP Main PLEASE NOTE: FOR REAL ESTATE BUYERS WHO CANNOT BE ONSITE: Real estate portion of auction will be broadcast to viewers via online bidding sites. However, if you wish to bid on the real estate (Lots 1-11) you will need to do so via phone. Your registration on the online bidding sites will suffice, but due to multiple possible combinations, we will need to have you on the phone with one of our staff to place bids. Phone numbers to use: Zach 931.224.0699 Jackie:931.698.3342 Eugene: 260.350.8953 Jonathon: 574.349.4380 Mel: 574.238.9469

10

Boiler Room
40'x60' All Steel Construction, Clear Span-2400 sq. feet; 5"x10" I Beam Steel @walls to 6"x12" I Beam at Ceiling;(2) 12'x12 Metal Panel Doors, Coated Vertical Steel Siding and Coated Steel Roof, Concrete Floor throughout. No Insulation. Electrical for lights as marked PLEASE NOTE: FOR REAL ESTATE BUYERS WHO CANNOT BE ONSITE: Real estate portion of auction will be broadcast to viewers via online bidding sites. However, if you wish to bid on the real estate (Lots 1-11) you will need to do so via phone. Your registration on the online bidding sites will suffice, but due to multiple possible combinations, we will need to have you on the phone with one of our staff to place bids. Phone numbers to use: Zach 931.224.0699 Jackie:931.698.3342 Eugene: 260.350.8953 Jonathon: 574.349.4380 Mel: 574.238.9469

11

48 Acres~ Excellent Buildings ~ Dry Kilns~ As an entirety
This lot is an entirety lot that includes lots 1-10. Top-Quality Commercial Property that will sell to the highest bidder without reserve! Make arrangements to inspect this property today! PLEASE NOTE: FOR REAL ESTATE BUYERS WHO CANNOT BE ONSITE: Real estate portion of auction will be broadcast to viewers via online bidding sites. However, if you wish to bid on the real estate (Lots 1-11) you will need to do so via phone. Your registration on the online bidding sites will suffice, but due to multiple possible combinations, we will need to have you on the phone with one of our staff to place bids. Phone numbers to use: Zach 931.224.0699 Jackie:931.698.3342 Eugene: 260.350.8953 Jonathon: 574.349.4380 Mel: 574.238.9469 Bidder Terms Bill Hanks real estate.pdf Fixtures not transferred with real estate.pdf real_property_auction_purchase__sale_contract__12015_ts09706.pdf

12

Pre-Dryer shed
120'x100'x20’ eve height labeled as FAN SHED. All steel construction 6'x12" steel columns at wales to tappered steel roof. Vertical steel conated sideing on each end. Open down sides and dividers for bays (8). Roof is vented down length of peak. (4) Banks of 15 fans down C/L of fan sheet. Finished Break room consisting of 11'x20' all cwood consruction with asphalt shingles

13

T-Shed
32'x160'x30’ eve height "T" shaped, all steel structure. Opened on all sides with gutters, Gavel grade, with concrete runners of ver gravel to support gross outs

14

T-Shed
32'x160'x 30’ eve height "T" shaped, all steel structure. Opened on all sides with gutters, Gavel grade, with concrete runners of ver gravel to support gross outs

15

T-Shed
32'x150'x30’ eve height “T" shaped, all steel structure. Opened on all sides with gutters, Gavel grade, with concrete runners of ver gravel to support gross outs

16

T-Shed
32'x155'x30’ eve height "T" shaped, all steel structure. Opened on all sides with gutters, Gavel grade, with concrete runners over gravel to support gross outs

17

Equipment Building
50'x100'x20’ eve height all steel clear span building with 12"x6" I Beam steel columns to tappered steel at roof. Coated steel roof

18

All 4x4x8 Bunk dividers
Several bunk dividers that have been gathered and stacked after use. Ready to load on your truck

19

All 6x6x8' treated post
These post were used to stack the on for air drying.

20

Fairbank 120,000 lb scales
in ground scales with electronic with weightronics digital read out and printer.  

23

Lignomat K Moisture Meter
0 Haus Precision Plus Digital Scales, Sharp Calculator

24

A and D Balance Digital Scales
Model EP-20KA

24A

Lot of Mulligan Engineered Flooring
#1 Common

25

(1) 4-Wheel Cart
4' x 2' W/ Contents

26

(1) 4-Wheel Cart
4' x 2' W/ Contents, Includes New Wire on Shelf in Box

27

Craftsman Cordless Drill Driver
W/ (2) Batteries & (2) Chargers

28

4-Drawer Filing Cabinet, 30 Gal. Trash Can
and 6' Step Ladder, Premier 2-Gallon Metal Garden Sprayer

29

Fittings for Kilns
(3) Containers

30

SII Kiln Wet Bulb Box of Filter
SII Spray Valve, Seal Rope for Vents

30A

Square D 600 AMP Main for Kilns
Breakers and transformers for Kiln Main Power

32

Speedair Air Compressor
Vertical Tank Mount, 1 HP Model # 3Z423F, Actuate Kilns 1 & 2 Vents

33

(2) Steam Trap Hydrometers
(1) New in Box, Vent Actuator Valves

34

Steel Shelf W/ Misc. Contents
Steel Shelf with contents

35

Wood Cabinet W/ Misc.
Spools of Electrical Wire, Kiln Parts, Soldering Gun, Fasteners, Hand Tools, Compressed Oxygen, Nitrogen, Grease Gun W/ Box of High Heat Grease for Fan Bearings

36

Quality Lab Oven
Model 3

37

Craftsman Shop Vac
6.0 HP, 16 Gallon

38

Keg Welder
Stainless Steel, (2) New Hoses

39

Craftsman Band Saw
14", 1/2 HP

40

Porter Cable 2 HP Portable Air Compressor
155 PSI

41

41 Steam Pipe Gaskets
3/4 to 6" on Wall as Marked

42

Steel Rack W/ Contents
Steel Rack and contents

50

15' x 20" Auger Conveyor
W/ Shaft Mount Reduction Drive & 5 HP Motor, Includes Steel Chute Metering Bin

51

200' Concave Belt Conveyor
W/ 24" Belt W/ Weighted Take Up W/ 20 HP Motor, Drive & Steel Supports

52

Brock Silo
W/ Flying Dutchman Silo Unloader, Model 4044, S/N 4885, About 6/7 Trailer Loads of Dust   Silo 21' diameter and 30' side wall

53

20' X 12" Auger w/ gear motor drive
Feed #1 to English Boiler

55

Endwise 65' Concave Belt Conveyor Covered
24" Belt W/ 5 HP Motor & Drive W/ Access Stairs & Catwalk & Steel Supports Covered to Boiler Stoker Feed Auger

59

30 AMP & 60 AMP Motor Control
.

61

14' X 12" Auger Conveyor
with gear motor drive (To Superior Boiler) 

62

30' X 12" Auger Conveyor
Reintroduces fly ash back in to fuel burning system 

65

Fromm P330 Battery Operated Banding system
.

65A

Fromm P330 Battery Operated Banding system
.

65B

Fromm P330 Battery Operated Banding system
.

66

Charger and battery for Fromm Charger
.

66A

Milwaukee Charger and Fromm Battery
.

67

P327 Fromm Battery Opeated Banding Tool
.

67A

P327 Fromm Battery Opeated Banding Tool
.

68

Fromm Battery with Fromm Charger
.

68A

Fromm Charger and two batteries
.

69

Dewalt Battery Operated sawall with charger
.

70

Lincoln Battery operated grease gun with 2 chargers and batteries
.

71

Fromm Manual Banding tool
.

71A

Fromm Manual Banding tool
.

72

Metal tool box and contents, bucket/contents, Coleman cooler
metal tool box wth misc tools, 5 gallon bucket with tools to include banding tools, staplers, hand tools with Coleman water cooler 32'x160' "T" shaped, all steel structure. 

73

3 extension cords
.

74

Strapping Cart
.

74A

Strapping Cart
.

74b

Strapping Cart
.

74C

Strapping Cart
.

74D

Strapping Cart
.

75

Stihl gas powered leaf blower
.

76

stihl chain saw (ms250)
gas powered 

77

(6) microwaves
condition unknown

78

mini frig
 condition unknown

79

Kyrocera K2560 Copier
 condition unknown

80

(7) Heaters
.

81

lot of misc Back up battery, anchors, computer screen
Back up Battery in box, (2) wheels, box of anchors, computer screen, paint 

82

Thermoheat Salamander
Dual heat technology, 100,000 or 125,000 BTU's

83

Reddy Heater Salamander
Pro 155, 155,000 BTU's

84

Master Pro Salamander
215,000 BTU's

85

Dura Heat Salamander
140,000/180,000 BTU's

86

Dura Heat Salamander
50,000 BTU's

87

Mr. Heater Salamander
75,000 BTU's

88

Master Salamander
75,000 BTU's

89

Dayton Salamander
50,000 BTU's

90

Salamander
75,000 BTU's

91

Machine-Dro Electronic Digital Caliper
Part No. PP-ME-01-EN, measuring range 20", looks like new

92

Tools, Carts and Bins
Lots of misc. tools, padlocks etc.

93

Tool Box
Loaded with tools, gloves etc.

94

Porter-Cable Portable Band Saw
.

95

Milwaukee Heavy Duty Rotary Hammer
.

96

Craftsman Hog Nose
.

97

DeWalt 7" Grinder
Heavy duty, brand new

98

DeWalt 7" Grinder
.

99

DeWalt 4 1/2" Grinder
Paddle switch, brand new

100

DeWalt 4 1/2" Grinder
Paddle switch, brand new

100A

DeWalt 4 1/2" Grinders
Paddle switch, total of 2

101

Alemite Grease Guns
1 pistol grip, 1 lever action, brand new

102

Alemite Grease Guns
1 pistol grip, 1 lever action, brand new

103

Fish Tapes
1-240' x 1/8" steel, 1-100' x 3/16" nylon

104

Greenlee 767 Slug Buster Punch Set
6500 PSI max

105

Chain Binder and Chain
Approx. 30'

106

Stihl Weedeater
FS240, works

107

Air Blowers
Total of 12, various lengths

108

Logrite Cant Hooks
total of 3, brand new

109

Axes, Sledges and Handles
2 axes, 2 sledges

110

Raytek Portable Infrared Thermometer
Raynger ST, works

111

Edge Series Regulators and Welding Hose
1/4" x 100'

112

Box of Misc.
5 Easy Heat water pipe freeze protection, 5/8" x 50' garden hose, Loggers first aid kits, butane fuel, and set of wheels

113

Ingersoll Rand Air Wrench
.

114

Ingersoll Rand Air Wrench
.

115

Ingersoll Rand Air Wrench
.

116

Misc. Wrenches and Pipe Wrench
sizes from 1 1/4''-2''

117

2 Hoists
.

118

Irwin 10" Construction Blades
Total of 3

119

H.K. Bolt Cutters
Brand new

120

Rope Ladder and Safety Harness
.

121

Fisher Metal Detector
CZ 3D enhanced

121A

Fisher Metal Detector
CZ 3D enhanced 

121B

Fisher Metal Detector
.

121C

Fisher Metal Detector
.

122

Fiberglass Section For Vibrating Conveyor
5', 24'' pan with 10'' sides

123

Mop and Mop Buckets
.

124

Watlow Screw Plug Heater with Thermostat
3000 W, BLS717E1S2

125

Siphon Drum Pump
Total of 3

126

ACDelco Hydraulic Pump
.

127

Hydraulic Bottle Jack
12 ton

128

Steel Drawer Case
Loaded with metric bolts, nuts, and washers, snap rings, socket head screws, spring pins, heat shrink etc. 

129

Plastic Organizer Bin
Loaded with stainless steel nipples, elbows and tees, various sizes

130

Steel Drawer Case
Loaded with stainless steel bolts and nuts, bits, drill bits, taps, dies, and lots of O-rings

131

Plastic Organizer Bin with some hand tools
.

132

Zebra Labeler and Allegro2 Lumber Tally
ZT410, serial # 18J160513988, includes Intermec cordless scanner and lots of labeling paper

133

Red Head Carbide Drill Bits
1 1/8" x 18" spline drive, 2 are brand new, total of 13 concrete bits, various sizes

134

Alcoa Thread Repair Kit
7 kits

135

Drive Chain Breakers
1 60-100, 1 120-160

136

Maintenance Bag Loaded with Tools and Supplies
Includes small pile of misc. beside bag

137

Motorola Radios
20+ radios, single chargers, 2- 6 bay chargers, and microphones

138

Columbian Vise and Funnels
.

139

Volvo Cylinders
For L90E and L90F, short cylinder middle of mast, total of 6

140

Browning Syncrogear Reducer
Frame 6, Model # Z08-E458-N

141

Milwaukee Hole Saw Set and Ampro Air Hammer
.

142

High Voltage Tester and Fluke Pro3000 Toner and Probe
.

143

Craftsman Band Saw Blades
7- 93 1/2'' x 3/8", 5- 80" x 1/4"

144

Weiler Single Row Wire Cup Brush
6" total of 5

145

DeWalt Palm Sander
.

146

20 Flap Discs for Angle Grinder
.

147

Skid Of Logger Supplies
9- chainsaw bars, 14- replacement sprocket nose kit, 16- chains, 38- bottles of 2 cycle oil, 3- protective chaps, lots of files and 1 Husky saw that doesn't run

148

Banding Crimper
Brand new

149

Banding Crimper
.

150

Banding Crimper
.

151

Banding Crimper
.

152

Banding Tightener
Brand new

153

Banding Tightener
Brand new

154

Banding Tightener
Brand new

155

Banding Tightener
.

156

Banding Tightener
.

157

Banding Tightener
.

158

Banding Crimper
.

159

Electric DeWalt Socket Driver, Electric Milwaukee Drill, Skill Saw etc.
.

160

20 V DeWalt Tools
Hognose, impact and flashlight, includes 2- 5 Ah and 2- 1.5 Ah batteries, 2- chargers

161

18 V DeWalt Drills
3 drills, 7 batteries, 3 chargers, includes Porter-Cable cordless drill

200

30'x15.5' 5 Strand Log Deck with H78 chain
30'x15.5' 5 Strand Log Deck with H78 chain, Gear Reduction Drive- steel support to the ground. THE FIRST OF AN ENTIRETY

201

202

22'x36" Endwise Log Trough
22'x36" Endwise Log Trough, SYMCLO gear reductions drive, steel supports to the ground; catwalk attached; 15 HP motor

203

204

1997 Nicholson 35" A6 4 Arm Right Hand Debarker (sn: 6846)
1997 Nicholson 35" A6 4 Arm Right Hand Debarker (sn: 6846), 75 HP Electric Motor; 25 HP Hydraulic Pack; 35 HP Motor Gear Reduction Drive on the chain through feed.; includes steel supports to the ground.

205

16'x36" Endwise Log Trough; 10 HP Gear Reduction Drive
16'x36" Endwise Log Trough; 10 HP Gear Reduction Drive, steel supports to ground, and catwalk attached

206

207

208

209

210

211

25'x15' 5 Strand Log Deck; H78 Chain, 7.5 HP Gear Reduction Drive;
25'x15' 5 Strand Log Deck; H78 Chain, 7.5 HP Gear Reduction Drive; S-Drive construction. Steel supports to the ground

212

29'x14' 5 Strand Log Deck- H78 Chain
29'x14' 5 Strand Log Deck- H78 Chain, 7.5 HP Gear Reduction Drive; Steel support to the ground

213

EX-CO Industries 10'x15' Decline Step Feeder
EX-CO Industries 10'x15' Decline Step Feeder, Hydraulic operated. No Hyd. Supply

214

32'x36" Endwise Log Trough, 15 HP motor,
32'x36" Endwise Log Trough, 15 HP motor, SYMCLO gear reduction drive; S Drive Construction

215

216

217

218

Allen Bradley Centerline MCC Panel, 800 amp.
Allen Bradley Centerline MCC Panel, 800 amp. No Wire or Conduit included

219

220

221

37'x10.5 3 Strand Log Deck, 3 Arm Stop and Loader,
37'x10.5 3 Strand Log Deck, 3 Arm Stop and Loader, H78 Chain; 5 HP Gear Reduction Drive; steel support to the ground

222

Shed over the Fulgum Debarker.
Shed over the Fulgum Debarker. Approx. 22'x24', catwalk, steel to the ground

223

Fulgum Model E-1018 Rosserhead Debarker (
Fulgum Model E-1018 Rosserhead Debarker (SN: F100607), 20 HP Hydraulic Pack. Will pass a 21' log.

224

44"x 65" Metal Cabinet for flamables
44"x 65" Metal Cabinet for flammables near the Fulgum Debarker

225

45' x8.5" 3 Strand Log Deck, H78 Chain, 3 Arm Stop and Loader,
45' x8.5" 3 Strand Log Deck, H78 Chain, 3 Arm Stop and Loader, 5 HP Gear Reduction Drive, Support steel to the ground

226

Morbark Debarker Model 636 (SN:285) 100 HP Main Electric Motor,
Morbark Debarker Model 636 (SN:285) 100 HP Main Electric Motor, 30 HP Electric Motor on Hydraulics which includes cab, Supports to the ground, No motor controls

227

228

229

230

231

232

National Boiler Company Reserve Air Tank
National Boiler Company Reserve Air Tank under the Nicholson Debarker

233

Vibrating Conveyor 20'
Dynamic Action Equipment Company Synchronous Frequency Balanced Vibrating Conveyor 20'6'x 24"bottom,15" sides 3 HP Motor with Switch, Motor Controls attached as marked (sn: 6-1448-1) 7/8 Stroke, 10 HP ??

234

Vibrating Conveyor 78'
Dynamic Action Equipment Company Synchronous Frequency Balanced Vibrating Conveyor 78' with 24" Bottom, 15" sides, 30 " top (SN: 6-1448-2), 10 HP Motor includes 5; Fiberglass Sections, Motor Disconnect as marked

235

Vibrating Conveyor 80'
Dynamic Action Equipment Company Synchronous Frequency Balanced Vibrating Conveyor 80' with 24" Bottom, 15" sides, 30 " top (SN: 6-1448-2), 10 HP Motor includes 5; Fiberglass Sections, Motor Disconnect as marked

236

237

238

239

Motor Control Panel includes (2) size 5, (1) size 4 , 100 Amp Disconnect.
Motor Control Panel includes (2) size 5, (1) size 4 , 100 Amp Disconnect. No wire or conduit included.

240

241

242

64'x11.5' 5 Strand Log Deck with Gear Reduction Drive, H78 Chain, 3 Arm Stop & Loader.
64'x11.5' 5 Strand Log Deck with Gear Reduction Drive, H78 Chain, 3 Arm Stop & Loader. Steel Supports to the Ground

243

Corley Bar Type Log Tuner;
Corley Bar Type Log Turner; Just Turner Unit No Valves or Hydraulic Supply

244

Corley 3 Head Block Lineal Position Slant Carriage
Corley 3 Head Block Lineal Position Slant Carriage includes the track, bumpers, and panograph. No controls Does seem to have moderate fire damage to carriage.

244-A

244B

Air reserve tank
Air reserve tank under carriage area

245

McDonogh 6' Right Hand Tilted Band Mill (sn: 72MA458)
McDonogh 6' Right Hand Tilted Band Mill (sn: 72MA458) Slat Off Bearer. Shows signs of fire damage. No motor or controls

246

13'x32" Slab Dump-
13'x32" Slab Dump- Belt has been burned off

247

12' Air Operated Cant Push Bar
12' Air Operated Cant Push Bar No visible fire damage

248

Corley 75' Main Rollcase
Corley 75' Main Rollcase (25) Live Rolls, 24"x8" rolls, (1) 4' 5 Arm Pop UP, (1) 3' 3 Arm Pop Up; (2) Air Stops, (1) 5 Arm Air Operated Cant Kicker, 5 HP Gear Reductions Drive, Disconnect as Marked. Some Visible Fire Damage in Middle Sections from above heat.

249

24'x11.5' 5 Strand Log Deck
24'x11.5' 5 Strand Log Deck includes Stop & Loader; Gear Reduction Drive. Feeds the Cooper Scragg

250

Cooper End Dogging Twin Scragg Mill
Cooper End Dogging Twin Scragg Mill to include Log Loading System. Twin R.H & L.H 62" McDonough Band Mills; (2) 150 HP/ 1190 RPM motors; (somewhat extensive damage, cab controls and scanner complete loss. The Fire followed the hydraulic system))

250A

Replacement wiring for Cooper Scragg Pre cut 6 cases
Cooper Scragg replacement wiring , Pre cut  6 cases

251

Miller Dialarc 250 AC/DC Constant Currant Welder
Miller Dialarc 250 AC/DC Constant Current Welder with leads- visible fire damage- condition unknown

252

Cooper 46' Outfeed Rollcase
Cooper 46' Outfeed Rollcase (22) 7'x8" Live Rolls; (1) Air Stop. Gear Motor Drive. No visible fire damage.

253

Transfer Deck System
Transfer Deck System to include 8' 5 Arm Jump Up Transfer, (1) 6'x16' 6 Strand Transfer Deck- H78 Chain

254

11'x13' Transfer Deck,
11'x13' Transfer Deck, H78 Roof Top Chain. Decks have 1 common gear motor drive, Pop Up Rollcase (7) 24x8" Rolls, Steel Supports to Floor, No Visible Fire Damage

255

25' Rollcase
25' Rollcase (9) 24x8" Live Rolls with 2 HP Gear Reductions Drive

256

Scherman Clam Shell Gang Saw
Scherman Clam Shell 10'' Guided Saw Bottom Arbor; 54" wide Gang Saw; Model 10SBA-54 (sn: 3166) to include 16' Hands Free Infeed Table with Cant Turners, Laser Guide Light System, Corley Cab with Controls; has USNR Controls. Fire traveled through the oiler systemand affected laser light systems. Cab and controls show NO visible damage.

257

(2) 200 HP Electric Motors
(2) 200 HP Electric Motors with fire damage

258

Corley 17' Outfeed Rollcase
Corley 17' Outfeed Rollcase (6) 60"x8" Live rolls with Gear Reduction Drive, 3 HP drive motor.

259

21'x12.5' 5 Strand Transfer Deck,
21'x12.5' 5 Strand Transfer Deck, H78 chain, operates at angle. Gear Reduction Drive; Steel to floor. Minimum visible fire damage.

260

McDonough 54" Horizontal Band Resaw.
McDonough 54" Horizontal Band Resaw. 7 1/4" face; 13/16 of inch thickness (SN: H54.1532.MBC); 75 HP motor, 7" band includes 16' Infeed Rollcase (7) 30"x8" Live Rolls, Cant Positioner, Cant Turner, Sawyer cab with controls. Very minimum visible damage

261

17' Outfeed Rollcase
17' Outfeed Rollcase (80 42"x8" Live Rolls; (6) 54" 6 Arm Jump Up Transfer, Hydraulic Drive- Steel Support to Floor

262

262A

Lots 260-262 Tied together with 10% raise.
Lots 260-262 tied together with 10% raise

263

Thermal Transfer 15 HP Hydraulic Pack
Thermal Transfer 15 HP Hydraulic Pack with minimal fire damage to electric wires

264

23'x 24" Belt Conveyor
23'x 24" Belt Conveyor (belt burned off) Gear Reductions Drive

265

266

10'x12.5' Return Deck
10'x12.5' Return Deck with 5 Strands of H78 Turtle Back Chain, Gear Reduction Drive. Steel Support to floor

267

20'x12' 5 Strand LumberTransfer Deck
20'x12' 5 Strand LumberTransfer Deck; H78 Chain, 5 HP Gear Reduction Drive, Support Steel to floor, Minimal visible fire damage.

268

269

15'x13' 5 Strand Transfer Deck
15'x13' 5 Strand Transfer Deck with H78A Roof Top Chain; 5 HP Gear Motor Drive. Minimal visible fire damage

270

6'x13' Waterfall Unscrambler System with Lumber Singulator
6'x13' Waterfall Unscrambler System with Lumber Singulator includes (1) 8'x13' 5 Strand Lumber Transfer Deck w/ H78 chain, Gear Reduction Drive; 6' Transfer Deck w/ (5) 32"x8" Evenender Rolls. Some visible fire damage.

271

CSMI Edger EDG8746 System (sn: 33848746894)
CSMI Edger EDG8746 System (sn: 33848746894) Extensive Fire Damage. Includes Infeed Decks, High Speed Infeed Rollcase; Edger Box, Main Motor. Steel Supprt to floor.

272

17'x36" Outfeed Belt Conveyor
17'x36" Outfeed Belt Conveyor; 36" flat belt with Finger Slab Tailing System; 5 hp Gear Motor Drive. Support Steel to Floor. Mimimum visible fire damage

273

17'x36" Belt Conveyor;
17'x36" Belt Conveyor; 5 HP Gear Motor Reduction Drive, Steel Support to Floor. Minimal visible damage.

274

275

Motor Control Panel
Motor Control Panel Square D 500 amp breaker box, (1) size 4, (2) size 5, (2) size 3, (1) size 2 and (4) size 0 starters. NO apparent fire damage

276

Motor Control Panel
Motor Control Panel to include 200 amp breaker, Allen Bradley Power Flex 525, (2) size starters, (7) size 0 starters, (1) size 1; misc starters in box. NO apparent fire damage

277

Motor Control Panel
Motor Control Panel 500 amp disconnect (2) size 5, (1) size 4, (2) size 0 starters 400 amp disconnect, (1) size 3, (1) size 4 starter NO apparent fire damage

278

Motor Control Panel
Motor Control Panel 800 amp disconnect. NO apparent fire damage

279

Motor Control Panel
Motor Control Panel (2) 400 amp switches, (3) size 5, (1) size 4, (2) size 0, (1) size starters. NO apparent fire damage

280

Motor Control Panel
Motor Control Panel 400 amp disconnect, (1) size 3, (1) size 4 starter NO apparent fire damage

281

Motor Control Panel
Motor Control Panel 600 amp disconnect; (3) size 0, (1) size 3, and (1) size 4 starters. NO apparent fire damage

282

Motor Control Panel
Motor Control Panel 200 amp Disconnect (2) size 0 starters,

282A

drill press
.

283

284

285

20'x10' 3 Strand Lumber Deck,
20'x10' 3 Strand Lumber Deck, Roller Type Chain, 5 HP Gear Motor Drive. Support Steel to 1st horizontal beam

286

10'x10" 3 Arm Pop Up Transfer Chain
10'x10" 3 Arm Pop Up Transfer Chain; Roller Chain; 3 HP Gear Reduction Drive No visible fire damage. Steel Support to 1st Horizontal Beam

287

21'x10' 4 Strand Lumber Transfer Deck
21'x10' 4 Strand Lumber Transfer Deck, H130 Roof Top Chain, Gear Reduction Drive. Support Steel to 1st Horizontal Beam

288

27'x12.5" 4 Strand Lumber Deck
27'x12.5" 4 Strand Lumber Deck (3) H78 Roof Top Chain; (1) H78 Chain; 5 HP Gear Motor Drive. Support Steel to 1st Horizontal Beam

289

Corley 5' Strand Unscrambler Model LU021 (sn: 15918)
Corley 5' Strand Unscrambler Model LU021 (sn: 15918); H78 Lugged Chain, 5 HP Gear Reduction Drive. Steel Supports to 1st Horizontal Beam

290

291

292

66' Belt Conveyor 16" Belt
66' Belt Conveyor 16" Belt; Gear Reduction Drive

293

294

295

296

Lumber Transfer System
Lumber Transfer System to include 96) 72"x13" Evenender Rolls; 6x14' 5 Strand Deck with Hyd. Drive; 8x13' 5 Strand Deck with Hyd. Drive

297

90 Degree Radial Lumber Transfer & 6 Arm Air Operated Stop
6 Arm Air Operated Stop; 5'x13' 5 Strand Decks with Hyd. Drive; 40'x13' 90 Degree Radial Lumber Transfer with Hyd. Drive

298

Lumber Transfer Deck to Upper Grading Station
Lumber Transfer Deck to Upper Grading Station- 3.5'x13' 5 Tiple; 5'x13' 6 Strand Transfer Deck, Hyd. Drive; 22'x13' 5 Strand Haul Up Deck with Lugged Chain and Hyd. Drive

299

CSMI Lumber Grading Station
CSMI Lumber Grading Station to include: 19'x13' 5 Strand Transfer Deck, 7'x13' 5 Strand Transfer with 5 Arm Lumber Stop and Board Singulator Rolls to the Grading Board, 8' 7 Strand Lumber Transfer Deck; All Hydraulic Drive, Steel Supports to the Floor. Will NOT include Hydraulic Supply. Control Booth and Controls total loss. No Fire Damage to Equipment.

300

12' 5 Strand Decline Lumber Transfer
12' 5 Strand Decline Lumber Transfer to the lower Grading Station Line. Hydraulic Drive

301

CSMI Lumber Grading Station
CSMI Lumber Grading Station to include: 19'x13' 5 Strand Transfer Deck, 7'x13' 5 Strand Transfer with 5 Arm Lumber Stop and Board Singulator Rolls to the Grading Board, 8' 7 Strand Lumber Transfer Deck; All Hydraulic Drive, Steel Supports to the Floor. Lower Grading Station has been Operational since Fire. No Fire Damage

302

30' 5 Strand Incline Deck
30' 5 Strand Incline Deck with Lugged Chain. No Sprokets or Shafts. Break Chain at both ends. THE FIRST OF AN ENTIRETY

303

CSMI TS3309 Optimizer Multi Saw Trimmer 16' with a Minus 1 Saw
CSMI TS3309 Optimizer Multi Saw Trimmer (SN: 33833308994) 16' with a Minus 1 Saw: to include CSMI Scanner System; Infeed Lumber Transfer Conveyors, Evenender Rolls, Push Button Contrls as marked, Main Electric Panel as marked. NO Main Unattached motor Controls

304

305

CSMI Hydraulic Pack
CSMI Hydraulic Pack with (1) 30 HP Electric Motor and (1) 15 Hp Electric Motor. No Motor Controls

306

CSMI 50 Bay Sorting System
CSMI 50 Bay Sorting System includes 38 Bay Bin Sorter; 12 Sling Sort Bays Zoned for Timbers; all Controls and Electronics in Operator Office, Hydraulic Pack; Roof over the Sort System that is attached to Sorter. Evenends to Left Hand Side. Software Updated: ???

307

235' 4 Strand Landing Deck
235' 4 Strand Landing Deck under Sorter System; H78 Chain; (1) 15 HP Motor, S Type Construction;181 Chain

308

CSMI 8' Sticker Stacker System
CSMI 8' Sticker Stacker System to include 15' 5 Strand Lumber Transfer Deck; 7.5 HP SYMCLO Gear Reduction Drive; 181 Chain; 8' 8 Strand Unscrambler with Lumber Singulator, (5) 6'x13" Evenender Rolls. Complete 6 Blade Stacking Unit T Elevator System; Lumber Package Rollout Rollcase with (15) 8.5'x9" Rolls; 30' 3 Strand Stick Deck; Hyd. Supply with 50HP Elec. Motor, 30 HP Elec. Motor, 15 HP Elec. Motor, 20 HP Elec. Motor. All Control Panels as marked and Catwalk. All Wire and Conduit from Trimmer System Included.

309

Tie Back 299-308 With 10% Raise
Tie Back 299-308 excluding lot 300 With 10% raise

310

400 amp disconnect, (1) size 3, (1) size 4 starter
400 amp disconnect, (1) size 3, (1) size 4 starter NO apparent fire damage ???

311

Allen Bradley 1600 amp MCC Electrical Panel located under the trimmer.
Allen Bradley 1600 amp MCC Electrical Panel located under the trimmer. No Inlet or Outlet included.

312

Siemens (2) 200 amp Safety Switch, (1) 30 amp Safety Switch.
Siemens (2) 200 amp Safety Switch, (1) 30 amp Safety Switch. No Wire or Conduit Included

313

314

315

316

317

318

Miller DialArc 250 amp AC/DC welder
Miller DialArc 250 amp AC/DC welder with leads outside of the room on reel stand

319

320

321

Tools on Wall
Tools on Wall to include wrechnes, pip wrench, air impact wrench, angle grinder, red metal tool box and contents inside the Sorter Operator Room

322

323

324

325

(1) 4 Drawer Metal Parts Cabinet
(1) 4 Drawer Metal Parts Cabinet inside the Sorter Operator Room

326

Microwave and Small Frig
Microwave and Small Frig inside the Sorter Operator Room

327

Jet 1/2 Ton Electric Chain Hoist includes I-Beam
Jet 1/2 Ton Electric Chain Hoist includes I-Beam located between Sorter and Trimmer

328

1 Ton Manual Chain Hoist
1 Ton Manual Chain Hoist located between Sorter and Trimmer

329

42" Portable Fan at the Stacker
42" Poartable Fan at the Stacker

330

331

Metal Stick Rack 3x6'
Metal Stick Rack 3x6' at the Stacker

332

Metal Bundle Rack 6x9'
Metal Bundle Rack 6x9' at the Stacker

333

(2) metal waste bins 4x8'
(2) metal waste bins 4x8' at the Stacker

334

Plastic Banding
(3) 400 ft Unopened Boxes of 5/8" plastic banding and (2) partial rolls

335

Section of Vibrating Fiberglass Section
(1) 60"x24" bottom Section of Vibrating Fiberglass Section located outside the Stacker Building

336

30' Aluminum Extension Ladder
30' Aluminum Extension Ladder at the Stacker

337

75'x30' Metallic Brand Open Span Building
75'x30' Metallic Brand Open Span Building ove rthe Stacker sides are 18'

338

Complete Lumber Breakdown System
Complete Lumber Breakdown System to include 25' 4 Strand Package Deck, 181 Chain, S-Drive Construction, Hyd. Drive. 8' 4 Arm Breakdown Deck. 12' 5 Strand Lugged, 181 Chain Decline Deck. 10' 4 Strand Transfer Deck, 181 Chain. Push Button Control Panel. Hydraulic Power Supply. 50 Hp Electric Motor. No Motor Controls. will Include Support Stell to the Ground and Catwalk System

339

20' of 24" Belt Conveyor with 5 Hp Gear Motor Drive
20' of 24" Belt Conveyor with 5 Hp Gear Motor Drive. No Motor Controls. Supports to the 1st Horizontal I-Beam

340

22' of 24" Belt Conveyor with 5 Hp Gear Motor Drive.
22' of 24" Belt Conveyor with 5 Hp Gear Motor Drive. No Motor Controls. Supports to the 1st Horizontal I-Beam

340A

50'x24" Belt Conveyor
50'x24: Belt Conveyor with 5 HP Gear Motor Drive.  No Controls

341

Sullair S-Engery 5500 Model 5509B Rotary Screw Compressor
Sullair S-Engery 5500 Model 5509B (sn: 201511300022) 75 HP Electric Motor

342

Sullair Model LS16ST Air Compressor
Sullair Model LS16ST (sn: 003-112781) Air Compressor, 75 HP Electric Motor & Disconnect. (41,850 hours) under Carriage

343

Sullair SAR400 Air Dry System
Sullair SAR400 Air Dry System (sn: 003-14425) under Carriage

344

Sullair Model 16BS-75L (sn: E03-953-92) Air Dry System
Sullair Model 16BS-75L (sn: E03-953-92) Air Dry System (80,259 hours) 75 HP Electric Motor and Disconnect under Carriage

345

Sullair SAR400 (sn: 003-D14082) Air Dry Sytem
Sullair SAR400 (sn: 003-D14082) Air Dry Sytem Under Carriage

346

Sullair 16BS (sn: E03-95395) Air Compressor
Sullair 16BS (sn: E03-95395) (55,292 hours), 75 HP Electric Motor- Disconnect as Marked

347

348

349

Motor Control Panel
Motor Control Panel with 200 amp Disconnect, (1) size 3, (1) size 2, (2) size 1 Starters

350

351

New Atlas Cop-Co Model LS10 Vertical Tank Mount Air Compressor
New Atlas Cop-Co Model LS10 Vertical Tank Mount Air Compressor, 10 Hp Electric Motor NEVER INSTALLED

352

353

125' Vibrating Conveyor
125' Dynamic Action Equipment Co.Synchronous Frequency Balanced Vibrating Conveyor 28" top, 18" bottom, 13" sides. Steel Supports to Ground, 10 HP Motor

354

100' Vibrating Conveyor
100' Dynamic Action Equipment Co.Synchronous Frequency Balanced Vibrating Conveyor 18"bottom, 6" side, 24" top with 7.5 HP Motor under Radial Conveyor. Steel Supports to Ground

355

38' Vibrating Conveyor
38' Dynamic Action Equipment Co.Synchronous Frequency Balanced Vibrating Conveyor 24" bottom, 30" top, 14" sides with 7.5 HP motor, Very minimal Fire dAmes; Paint Discoloration only located under the High Speed Edger. Steel Support to the Floor

356

100' Vibrating Conveyor
100' Dynamic Action Equipment Co.Synchronous Frequency Balanced Vibrating Conveyor 24" bottom, 30" top, 14" sides with 15 HP Motor. Steel Support to the Ground Outside Edger Close to Chipper.

357

33' Vibrating Conveyor
33' Dynamic Action Equipment Co.Synchronous Frequency Balanced Vibrating Conveyor 18" bottom, 24" top, 6" sides with 3 HP Motor Steel Support to the Ground

358

40' Vibrating Conveyor
40' Dynamic Action Equipment Co.Synchronous Frequency Balanced Vibrating Conveyor 18" bottom, 24" Top, 12" sides with 3 HP Motor has Balanced Fiberglass Paddles located under the High Speed Edger

359

78' Webster Vibrating Conveyor
78' Webster Vibrating Conveyor with 15 HP Motor 24" bottom, 32" top, 10" sides

360

75' Webster Vibrating Conveyor
75' Webster Vibrating Conveyor includes 5' fiberglass Sections. 24" bottom, 32" top, and 10" sides with electric motor 10" Saw Dust Screen

362

MDI Metal Detector
MDI Metal Detector going up to the Chipper

363

Fulgum 60' 8 Knife Chipper with 200 HP Electric Motor.
Fulgum 60' 8 Knife Chipper with 200 HP Electric Motor. No Motor Controls, Pipe to Cyclone, Cyclone. Fulgum 8x8 Shaker Screen. No motor controls

364

365

40' Chip Conveyor with H78 Drag Chain
40' Chip Conveyor with H78 Drag Chain, Gear Motor Reduction Drive

366

367

Fulgum Chip Pack
Fulgum Chip Pack to include 60" 8 Knife Chipper, 200 HP Electric Motor. No motor controls, Pipe Collector. Fulgum 8x8 Shaker Screen, No motor controls.

368

30' Fulgum Vibrating Conveyor
30' Fulgum Vibrating Conveyor 24" bottom, 32" top, 10" sides includes 5' Fiberglass Section

369

40' Chip Conveyor with H78 Drag Chain
40' Chip Conveyor with H78 Drag Chain, Gear Motor Reduction Drive to trailer loading system

370

371

Motor Control Panel and Disconnect
Motor Control Panel and Disconnect to operate Chip Load Out System

372

Auger Conveyor
17'x6" Auger Conveyor for saw dust with motor and drive

373

30'x6" Auger Dust Conveyor
30'x6" Auger Conveyor for saw dust with motor and drive

374

15'x8" Auger Dust Conveyor
15'x8" Auger Conveyor for saw dust with motor and drive

375

40'x16" Saw Dust Haul Up Conveyor
40'x16" Saw Dust Haul Up Conveyor , H78 Drag Chain ot Saw Dust Load Out System

376

36' Dual Trailer Auger Type Saw Dust Loading System
36' Dual Trailer Auger Type Saw Dust Loading System with Controls as marked

377

(2) 20'x20' Open Span Buildings
(2) 20'x20' Open Span Buildings over Chippers, Steel support to the ground

378

24''X65' Belt Conveyor with 23" Belt, 8'' sides
Located under the Cooper Scragg, 7.5 HP motor No motor controls, belt is partially melted from fire.

379

30' Saw Dust Conveyor
30' Saw Dust Conveyor with 8" Ladder Back Chain, Motor and Drive. No motor controls

380

25'x16' 8 Strand Clean Out Deck
25'x16' 8 Strand Clean Out Deck under mill 81x chain. Motor and Drive. No motor controls

381

13'x15' 8 Strand Clean Out Deck
13'x15' 8 Strand Clean Out Deck under Mill, 1 HP motor

382

383

Wire and Conduit in Main Sawmill Building NOT to include any wire or conduit to Log Merchandizing System or from 10' Unscrambler to Sorter System
All Wire and Conduit in Main Sawmill Building NOT to include any wire or conduit to Log Merchandizing System or from 10' Unscrambler to Sorter System. Only includes inside Main Sawmill Building Where Fire Occurred.

384

385

Corely 8x60" Gang Edger
MFG: 1986 (TAE860003)

386

Sawmill Building
Irregular shaped all steel building

400

Yates American A20 Planer
8'' x 14", 4 heads total, 1 top 1 bottom and 1 on each side, (6) Knife Side Head, (6) Knife Planer Heads, Includes Dust Trees to Main Trunk Line, Planer and Feed Table Run Together on Same Power

401

Double Pineapple Planer Feed Table
Newman Machine W/ (5) Rolls, S/N 9210 W/ Pedestal Operator's Controls W/ Foot Control

402

OSHA Guards
Around Planer

403

(2) Lincoln Motors
25 HP and 200 HP

404

Planer Knives & Belts W/ Steel Table
(3) Sets of Eased Edge Side Heads (6) Knife, (1) Set of Straight Knife 4", (1) Set of Straight Knife 6", (1) Set of Planer Belts, Includes Steel Table 4' x 28" Top

405

Planer Outfeed Belt Conveyor
22' x 22" Bottom, 34" Overall, 18" Belt W/ 11" Sides W/ 2 HP Motor & Reduction Drive

406

Toshiba Transistor Inverter
G3 TosVert 130

407

Package Deck
20' x 9' Wide (3) Strand HD W/ 6" Straight Pentile (Roll) Chain, Hydraulic Motor W/ Gear Reduction Drive (Direct Couple)

407A

1 Lot of Hand Tools and Power Grease Gun
I 1lot of hand tools and Power Grease Gun  LOCATED IN PLANER ROOM IN PLANER MILL

408

(3) Strand Conveyor & Breakdown Hoist
10' x 11' Wide (3) Strand Conveyor for Breakdown Hoist W/ Hydraulic Motor & Direct Couple Drive - 7' (4) Chain Arm Breakdown Hoist W/ Hydraulic Drive & Direct Couple Philadelphia Gear Drive W/ Stick Conveyor, Apron Plates & Lumber Slide, 21' Stick Conveyor has Electric Motor & Reduction Drive, 6" Belt

409

Hydraulic Power Pack
20 HP

410

Lumber Landing Conveyor
31' x 11' W/ (4) Strands 81X Chain, 5 HP Motor, 1725 RPM W/ Reducer

411

Tipple Dropout
(4) Arm, 3' Arms to Center Split Resaw attached to 18' x 11' (3) Strand Transfer Deck W/ (1) Strand of 81X Chain & (2) Strands of H-78 RT Chain

412

26' Belt Conveyor
W/ 3" Flared Trough, 16" Belt, 18" Bottom, 22" Overall, Tipple Dropout Conveyor to Center Split Resaw

413

Planer Bridge
5' x 11' (4) Strand W/ 81X Chain W/ 3 HP Motor & Reduction Drive

414

Landing Chain & Infeed to Trimmer
21' x 10' W/ Steel Plate Landing Section W/ (2) Strands of H-78 RT Chain W/ (1) Strand of 81X Chain W/ 2 HP Motor & Reduction Drive, (4) Arm Hydraulic Stop

415

(9) Station Drop Saw Trimmer
W/ Independent Motors, Odd Even Setup W/ Hydraulic Paddle Fence W/ Variable Feed Through Chain & Toshiba Controller, Includes Built in Waste Conveyor

416

20' Lumber Conveyor
(4) Strand behind Trimmer 12' Wide W/ 81X Chain W/ 3 HP Motor & Drive W/ Operator Control Box

417

(3) Strand Package Conveyor
10' x 9' Wide W/ RC120 Roller Chain W/ Hydraulic Motor & Drive

418

Hydraulic Power Pack
7.5 HP W/ 18" x 30" x 12" W/ OSHA Guard

419

Yates American V54 Center Split Resaw
Weighted Strain B22350 W/ 50 Hip Motor, 14" Fence W/ Operator's Station and Foot Control, No Dust Pipe Includes 50 HP motor

420

13' Infeed to Center Split Resaw
10" Wide Bottom W/ (2) Strands of 81X Chain and Room for Another Strand, 12" Deep & 16" Overall

421

Landing Deck
11' x 13' Wide Lumber Landing Table, (1) Strand of 81X Chain, (3) Strands of H-7i Mill Chain W/ 3 HP Motor & Drive

422

Outfeed from Resaw
15 1/2' Belt Conveyor W/ 16" Bottom x 9 3/4" Deep, 29" Overall W/ 3 HP Motor & Drive 

423

Toshiba Ge Tosvert-130 Transistor Inverter
W/ Box Mounted on Resaw Outfeed  

424

Lumber Carts
(3) 4 x 8' HD Steel Lumber Carts W/ Kiln Trucks, 3 X the Money

425

Lumber Carts
 4 x 8' HD Steel Lumber Carts W/ Kiln Trucks

426

Lumber Carts
 4 x 8' HD Steel Lumber Carts W/ Kiln Trucks

427

Steel Lumber Cart
4' x 6' HD

428

(2) Lumber Carts
Lineberry & Old Compressor Component

429

Planer Parts
Under Resaw Outfeed - Pulleys, VFD Unit (Mechanical Style), Energy Electric 31 HP Motor, 1156 RPM, 3 Phase 230/460 V, Reduction Drive Casing

430

(2) Bundles 42 x 3 1/4 x 3/4 Heat Treated US168270-HT Packing Slat boards
Approx. 120 Each Pack, Includes (20) 4 x 4 Non Heat Treated Cross Outs

431

Air Hose Reel
Mounted by Furnas MCC

432

Stair Section
39" High w/ 32' x 24' Platform, 3' Crossover Stair Unit,

433

Steel waste container
8' x 3 1/2" x 29" Deep

433A

Steel Waste Box
8' X 3-1/2' X 29" deep steel container

434

(2) Stacking Stick Racks
(1) Lot

435

Furnas System 89 MCC
Series B, 3 Phase 800 Amp Horizontal Buss, 42K Amps, 600 Volts, 300 Amp Vertical Buss, Style 898SW5026-1, Includes any Additional Control Boxes

436

Cabinet at Planer Mill #1
Delmorst Moisture Meter, Ear Plugs & Planer Books

437

Cabinet at Planer Mill #2
Planer Knives & Various Planer Parts

438

Bottom Cabinet
W/ Newman Feed Table Parts New & Used

439

Cabinet at Planer Mill #3
(1) Party Size Percolator, (1) Espresso Coffee Maker Includes Small Break Room Shake W/ Contents & Air Conditioner - New Planer Feed Table Parts

440

Flex Steel Ribbed & Plastic Hose, Belting
4 3/4" Flex Steel Ribbed HD & Plastic Hose, 9 1/2" Wide Roll of Belting

441

Profile Grinder
W/ Work Station & Head Stand & Additional Wood Construction Work Table 4' x 12'

442

Dome Lights
Under Planer Outfeed

443

Electrical Components in Planer Mill
Not Installed & Not Sold, Wear Plate, Strapping as marked

444

10 HP Tank Mount Air Compressor
120 Gallon Horizontal Tank Includes Additional 120 Gallon Reserve Tank

445

Shavings Collector Fan
Approx. 48" W/ Motor, 18" Intake & Discharge, Includes (1) Trunk Line in Planer Mill and Cyclone Collector

446

Dual Bay Van Level Load System
35' Auger Type Load W/ auto Switch Over

447

45' Split Level Conveyor
16" Wide, 12" Deep W/ Shaft Mount Reducer & Motor

448

Electrical at van level load
Dual Bay Load out, Motor Control at Van Level Load, (3) Furnas Size "0" MCC, (2) Westinghouse Size "0" MCC W/ GE 60 Amp Disconnect

449

Jeffrey W.B. Hog
Model 54 , S/N 13508 W/ Hopper Chute, Drop feed Bottom Discharge

449A

200 HP Electric Motor
1175 RPM 460 Volt Direct Couple W/ Hog  includes:  Transition Box  

449B

45' Incline Conveyor, Flared Trough
H78 Drag Chain, 12" on Flare, 24" Overall W/ Apron Plate Hopper (Trimmer Blocks) to Hog

450

8' Dual Auger Discharge
from Hog W/ Direct Couple 5 HP Motor & Reduction Drive

451

Single Unit Overhead Van Level Load System
W/ 35' Auger W/ Shaft Mount Reduction Drive

452

30' Split Level Conveyor
16" Bottom, 12" Deep W/ H-78 Drag Chain & Wear Plate W/ Shaft Mount Reduction Drive & Motor to Van Level Load

453

Planer Mill Hog Electrical
Allen Bradley SMC Plus Protective Module, Square D 350 Amp Breaker W/ Staged Starter for 200 HP Motor, Includes at Least (5) Size "0" Motor Controls W/ 15 to 20 Amp Breakers, Cutler Hammer 400 Amp Safety Switch, Includes Raceway, 30 Amp disconnect l, 100 Amp Disconnect l for Hog

454

Planer Mill Building.
60'x100' x15'

455

Irvington Moore Stacker
Hydraulic Breakdown System, (4) Arm 8' Breakdown Hoist W/ HD Hydraulic Cylinder - (3) Strand HD Package Deck W/ S-Drive Construction, Tulsa Winch & 15 HP Motor, 81X Chain - 20 HP 30" x 16" x 48" Reservoir Hydraulic Power Pack - 8' x 12' Wide (5) Strand Breakdown Table w/ 81X Chain, 3 HP Motor & Drive has Apron Plate & Stick Dropout Conveyor (Not in Use) - 6' (7) Strand Waterfall Unscrambler w/ 81X Lug Chain W/ Assist Section, Operator Control, Motor & Drive, Sufficient to Operate - 25' x 12' Wide Grading Area W/ Board Hook Stop & dealer, (5) Strands 81X Chain W/ Return Channels, 12' Steel Plate Section W/ Grade Controls - (5) Arm 3' Board Air Tipple Attached Lumber Stacking Frame - 25' Endwise Belt Conveyor, 6" Deep Sides, 24" Belt & Bottom 30" Overall - 20' x 14' Wide Stacking Frame W/ Layer Catch W/ Even Ender, 8' (6) Arm Blade Type Stacking Arms W/ Motor & Drive W/ Operator's Control, Motor Controls at Stacking Frame - 8' x 16' Package Hoist Above Ground Cylinder & Chain Index - 40' x 8' W Package Rollout Conveyor W/ 3 HP Drive, 6 1/2" Rolls - 10 HP Hydraulic Power Unit 2 x 2 x 3 Reservoir - Platform Stick Placement Area, Stairs & Catwalks -

455A

Atlas Copco Air Compressor
(1991) 10 HP, Dual Piston, 80-100 Gallon, Horizontal Tank

456

16' Spiral Rollcase
W/ (9) Spiral Rolls 28" Wide, 6+/-" Diameter W/ Motor & Drive from drop out tipple section on stacker line

457

Lumber Dropout Area
20' (4) Strand Accumulation Deck W/ 81X Chain W/ 3 HP Motor W/ Drive

458

(1) Convex Mirror
in Stacker Building

459

15' Incline Stick Belt Conveyor
12" Bottom, 4" Deep, 15" Overall W/ 3 HP Gear Motor

460

(2) Stacking Stick Racks
4 x 8'  Plus one man safety lift platform 

461

Belting of Various Lengths
(2) 20", 23", (2) 48", (2) 31", (2) 36"

462

Lot of Carriage Track and Misc.
20' Sections, Includes About (4) Sections W/ Speed Reducer & Variable Feed Drive (Manual) and Conveyor Sprocket & Shaft W/ Drive Sprocket

463

30'x120'x20’ eve height Stick Stacker Building
all steel clear span tappered steel columns at walls to 18" I-Beam steel at roof. Gutters. Both long sides have vertical steel coated. Ends are open. Skylights in roof. (6) 8' (2) lamp florecent fixtures

465

New 8’ Stacking sticks
1 Bundle 1020 sticks 3/4x1-1/4x96” Fluted sticks

465A

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96"  (Location: Fan Shed)  

465B

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96"(Location: Fan Shed)  

465C

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96" (Location: Fan Shed)

465D

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96" (Location: Fan Shed)

465E

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96" (Location: Fan Shed)

465F

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96" (Location: Fan Shed)

465G

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96" (Location: Fan Shed)

465H

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each   3/4 X 1-1/4 X 96"(Location: Fan Shed)

465I

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96" (Location: Fan Shed)

465J

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96" (Location: Fan Shed)

465K

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each   3/4 X 1-1/4 X 96" (Location: Fan Shed)

465L

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96" (Location: Fan Shed)

465M

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96" (Location: Fan Shed)

465N

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each   3/4 X 1-1/4 X 96"(Location: Fan Shed)

465O

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96" (Location: Fan Shed)

465P

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96" (Location: Fan Shed)

465Q

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96" (Location: Fan Shed)

465R

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96" (Location: Fan Shed)

465S

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96"(Location: Fan Shed)

466

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
8' long, Selling by the piece and times 6

466A

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466B

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466C

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466D

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466E

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466F

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466G

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466H

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466I

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466J

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466K

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466L

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466M

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466N

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466O

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466P

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466Q

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466R

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466S

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466T

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466U

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466V

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466W

(3) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 3

467

(2) Bundles of Breeze Drying Sticks
8' long, approx 1500 pieces , Selling by the piece and times 2

467A

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

467B

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

467C

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

467D

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

467E

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

467F

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

467G

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

467H

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

467I

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

467J

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

467K

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

467L

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

467M

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

467N

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

467O

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

468

Pop Up Cut Chop Saw
Mid-Oregon Industries Pop Up Cut Chop Saw, air operated, electric motor on saw. (SN: 24772)

469

Gravity Rollcase
16'x12" Gravity Rollcase

470

Gravity Rollcase
9'x24" Gravity Rollcase

471

Dust Blower W/ Collector bag
Grizzly 14" Dust Blower with Collector Bag

472

Mattison Stright Line Rip Saw
Mattison 207 Straight Line Rip Saw (SN 9837)

473

Dayton Dust Collector
Dayton 2 Stage Dust Collector made for Drum

474

Piper Saw Shop Band Chopper
Pipers Saw Shop Band Chopper

475

476

Factory Carts
(5) Factory Carts

477

Hand Tools, Brooms, Shovels, and Rakes
Lot of Hand tools, brooms, shovels, and rakes

478

479

480

Lumber Breakdown and Grading System
26' (4) strand package deck w/ 81X chain w/ S Drive Const. 7.5 HP mtr. 8' live chain arm breakdown hoist / Electric Brake w/ operator's controls 20' stacking stick drop out belt 12" w & 9-1/2" deep includes catwalk and stairs. THE FIRST OF AN ENTIRETY 

481

Stacking Stick Unscrambler/Stacker
w/ (3) strands of welded bar 81X chain and gear motor

482

Lumber Landing Transfer Conveyor
27' (5) strands of 81 X chain motor and drive

483

USNR Board Dealer with Lug Loading Section
w/ grading chain with (6) dual channel strands. (1) channel 81X lug chain (1) channel 81X RT chain double sprocket drive 3 HP mtr & drive.   

484

52' Lumber Sorting Conveyor
(4) strands of 81X HD Chain 7.5 hp mtr. and drive has pull stop cable length of conveyor

485

Lots 480 thru 484 with a 10% raise
USNR Complete dryline breakdown, grade and sort system w/ stick removal and stacking unit.

486

Lumber Stacking Cart
3-1/2  4' overall X 10'   w/ (4) 3-1/2' tall bunks with kiln truck wheels  

486A

Lumber Stacking Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486B

Lumber Stacking Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486C

Lumber Stacking Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486D

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486E

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486F

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486G

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486H

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486I

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486J

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486K

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486L

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486M

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486N

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486O

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486P

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486Q

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486R

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486S

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486T

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486U

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486V

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

487

Verticle Tank Mount Air Compressor
BelAir 5 HP Verticle Tank Mount Air Compressor

488

489

Black Plastic Strapping
4 rolls 1x.05 Black Plastic Strapping

490

490A

6'x4' Steel Stick Carton Wheels
6'x4' Steel Stick Carton Wheels includes the sticks in the cart

491

492

Barrel With Hand Tools
Barrel with Hand Tools

493

494

495

Approx. 33 Warehouse Lights
on floor in Grading building

496

Electric Control Panels
for grading line, no wire or conduit, 2 boxes

497

Holtec Transcut
Year 2017 SN 17091, 60" cut, 3 phase electric. NICE!

498

Mcdonough 62" New bottom Band Mill Wheel
BRAND NEW!  9.25" face

499

New Nicholson Debarker Arms
4 new arms and for refurbished arms for Nicholson debarker

1100

4/4 F1F-BTR ASH 1021 BD FT
12' 1 PACK K091018012

1101

4/4 F1F-BTR HICKORY 3018 BD FT
3 PACKS 10',12',14' 012815M,012715Z,012715Q

1102

3/4 1COM-SEL POP 821 BD FT
3 PACKS 10',12',16' K102317023 K071917019 K101917023

1103

3/4 2COM POP 2555 BD FT
2 PACKS 10',12' K071917019 K101917023

1104

3/4 FRAME POP 1883 BD FT
6 PACKS 10',12',14' K102017010 K071917025 K112316001 K102017001 K102017001 K102317006

1105

4/4 2COM POP 5615 BD FT
5 PACKS 8',10',12' K082818016 K100218004 K082718004 K082318008 K082318004

1106

4/4 SELECT5 POP 2222 BD FT
7 PACKS 8',10',12',14' K092018004 K091718014 K111418007 K102418018 K091818007 K111418016 K110218010

1107

5/4 1COM-SEL POP 1161 BD FT
2 PACKS 8',14' K102418009 K102418006

1108

5/4 6 POP 2963 BD FT
6 PACKS 6' K011718017 K021618003 K121217006 K101917014 K101917003 K101817022

1109

5/4 7 POP 4375 BD FT
7 PACKS 7' K021618002 K020818027 K011718016 K101917015 K101917007 K101917005 K101817021

1110

5/4 R-Q POP 2805 BD FT
2 PACKS 14' 012913II 121812Q

1111

8/4 FRAME POP 1498 BD FT
8 PACKS 8',10',12',16' K060917031 K051817009 K071317030 K052217003 K071317049 K051917020 K061217016 K051817014

1112

4/4 F1F-BTR-D RO 2702 BD FT
8 PACKS 8,10',12',14',16' K061318017 K112718021 K050218026 K042318002 K050718007 K050418005 K042018014 K061818030

1113

4/4 F-PS2S RO 7840 BD FT
7 PACKS 12',14',16' 826029 082602R 211106 211108 211107 211109 021110A

1114

4/4 WORMY RO 5612 BD FT
15 PACKS 7'-8' K112718028 K031918004 2030022 K040218013 K090417010 K020718008 K111717008 K041618025 K041317026 K061318015 K102518018 K071917010 K050418004 061112X K060717006

1115

4/4 WORMY RO 12,201 BD FT
19 PACKS 9'-10' K041317002 K071817020 K112718029 K020618034 K031518031 K061918003 K050418019 K112217018 K060917021 K090117012 K041918002 020209AA 202051 727048 011412G K040218028 011412M 011412P K050218009 061112M K081518007

1116

4/4 WORMY RO 18,300 BD FT
26 PACKS 11'-12' K112718030 101011P K113017005 111214N K111816018 K102616016 K110118011 K010518025 K050718010 K081518010 K071717003 041913Q K031518005 K060817036 K090517023 K050118007 072616CC K061818009 020812O 082009F 020209BB K112917014 201058 K041718019 K040418013 030515CC 011412S

1117

4/4 WORMY RO 7576 BD FT
11 PACKS 13'-14' K031918014 K041918014 K020518029 041913DD 072616F 020612V K050318002 K112717020 2030577 011412K 011412N 526086

1118

4/4 WORMY RO 1914 BD FT
3 PACKS 14'-16' 202052 K090117020 K071817025

1119

5/4 F1F-BTR-D RO 2546 BD FT
6 PACKS 9'-10' 010412Q 041912R 110911J 011713X 062912DD 803118

1120

5/4 F1F-BTR-D RO 4794 BD FT
5 PACKS 12' 110911D 080311U 082611J 010412P 121510CC

1121

5/4 F1F-BTR-D RO 2661 BD FT
5 PACKS 14' 110811Y 062912G 103012V 011713A 041912AA

1122

5/4 WORMY RO 1679 BD FT
6 PACKS 10',12',14' 120513PP 080311K 041912O 080311H 120513QQ 120513OO

1123

6/4 3A,F1F-BTR-D,COMSEL RO 4393 BD FT
17 PACKS VARIOUS LENGTHS 040910G 060810EE 412104 060910H 041210R 040910P 609108 041210E 060810Y 060810II 060910G 041210S 609109 041210D 041210T 060910K 040910O 041210A

1124

4/4 COMSEL WO 3848 BD FT
4 PACKS 10' K052118010 K052118021 K052118005 K061118019

1125

4/4 F1F-BTR-D WO 1341 BD FT
4 PACKS 8' K041118018 K052418020 K101818023 K112718014

1126

4/4 F1F-BTR-D WO 3706 BD FT
6 PACKS 10' K112118013 K040918014 K052118024 K032318015 K052118001 K040618008 K013118032

1127

4/4 F1F-BTR-D WO 4106 BD FT
6 PACKS 12' K040518023 K041018014 K051718027 K032318013 K051618012 K040518004

1128

4/4 F1F-BTR-D WO 1575 BD FT
3 PACKS 14' K101818030 K041018021 K052518003

1129

5/4 COMSEL,F1F-BTR WO 5216 BD FT
6 PACKS 14',12' K122016003 K121916012 K121916013 K122016001 K122016002 K121916014

1130

4/4 WALNUT
APPROX 250 BD FT

1131

4/4 ASH
APPROX. 300 BD FT

1132

4/4 & 3/4 RED OAK
VARIOUS LENGTHS, APPROX. 2000 BD FT

1133

5/4 WHITE OAK
OLD STOCK APPROX 2000 BD FT

1134

5/4 RUSTIC CHERRY
APPROX 275 BD FT

1135

5/4 POPLAR
APPROX 300 BD FT

1136

9 SKIDS OF PINE RUNNERS
3"X36" 

1137

36 SKIDS OF LUMBER CUTOFFS
VARIOUS SPECIES AND LENGTHS

1138

4"x4"x8' RUNNERS
FULL BUNDLE IN LUMBER BUILDING