Chevrolet Dealership Liquidation #2
Previous Page Listing ID#: 84963

Auction Location

Cordell, OK 73632
Auction Dates and TimesSALE IS COMPLETED
Bidding Starts: Thursday Aug 2
Bidding Ends: Tuesday Aug 21
Auction Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
United Country Heard Auction & Real Estate, LLC

Phone: 580-323-6120
Email: info@heardauction.com
Website: www.ucheardauction.com

GoToAuction.com ID#: 4842
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
The following terms and conditions apply to all auctions conducted by United Country Heard Auction and Real Estate, it's employees, agents, and assigns (Auctioneer), and any participants, their employees, agents, and assigns (Bidder), in said auctions, unless otherwise stipulated by the Auctioneer within any additional terms and conditions specifically expressed in regard to any single auction. By registering for, and participating in, this auction, Bidder acknowledges these terms and conditions and consents to abide by them, as well as any other/additional terms and conditions expressed specifically elsewhere within any auction listing. Terms and Conditions: 1. GENERAL AUCTION INFORMATION a) ALL ITEMS on the auction sell subject to the Auction Co.'s acceptance or rejection of the high bid. b) All items sold at auction conducted by Auctioneer are sold strictly on an "as-is-where-is" basis (shipping, packing, and/or loading are not included). c) Auctioneer and/or its consignor(s) reserve the right to add, delete, or alter any auction item prior to the opening of the auction. d) Neither the Auctioneer, nor its consignor(s), will recognize, or be held liable for, any claims for theft, damage, or loss once an item has been awarded and Bidder payment has been received. e) Auctioneer DOES NOT SHIP ALL items. Bidder is responsible for any/all shipping costs assessed by the auctioneer, when available. All non-shipped items must be picked up from auction site by Bidder, or authorized Bidder representative, at designated date and time. See Auction info for specific auction details. f) Items not picked up by Bidder, or authorized Bidder representative, within stipulated time frame, regardless of payment, will be subject to a storage rate of ($10) per item, per day, and may be re-sold, at Auctioneer's sole discretion, to pay for storage costs. 2. PURCHASES/FEES a) All sales are final and no sale shall be invalidated. There are no returns or refunds, and credit payments cannot be reversed. b) A thirteen percent (13%) Buyers Premium will be applied to ALL purchases. c) ALL internet/online purchases may be subject to a per-item internet/handling fee. The auctioneer will list this fee, when applicable, in the shipping/pickup information section of the auction listing. d) All funds are to be paid in USD. Bidder is responsible for and agrees to pay, all duties, custom, taxes, and any other fees associated with the purchase of any item. e) Bidder agrees to pay for all items before removing any items from the auction site. 3. PAYMENT a.) All purchases must be paid in full by end of auction. Acceptable method of payment is by credit card. All funds will be paid in USD. (13%) Buyer's Premium will be applied to ALL purchases. b.) Bidder is responsible for and agrees to pay, all duties, custom, taxes, and any other fees associated with the purchase of any item. All sales are final, and no sale shall be invalidated. There are no returns or refunds, and credit payments cannot be reversed. c.) Buyers will be charged 9.5% tax on all items purchased. 4. ITEM DESCRIPTIONS a) Neither the Auctioneer nor its consignor(s), make any guarantees, warranties or representations, expressed or implied, with respect to the property being sold, except as to the warranty of title. All implied warranties of merchantability, and/or fitness for purpose, are specifically disclaimed by the Auctioneer and its consignor(s). b) Specifically, neither the Auctioneer, nor its consignors, makes any representation or warranty of any kind, expressed or implied, with respect to any of the following characteristics of property: age, authenticity, genuineness, attribution, provenance, origin, physical condition, importance, size, quality, quantity, rarity, value exhibitions, historical references or significance, medium, material, culture, or source origin. c) All information within any catalog, sale bill, auction listing, advertising, website, or elsewhere is offered to the Bidder as a statement of opinion only. It is not intended to contain statements of fact for which the Auctioneer or its consignor(s) may be held liable. This disclaimer of liability on the Auctioneer's part applies whether the information is included in any catalog, sale bill, or website, and extends any advertisements, announcements, or communications through our representatives, bills of sale, or elsewhere, and regardless of whether written or oral. d) Neither the Auctioneer nor its consignor(s), shall be responsible for the correctness or accuracy of descriptions or other information in any catalog or elsewhere. The Bidder assumes full responsibility to inspect and to evaluate the property to its, his, or her, complete satisfaction prior to any bid or purchase. The Bidder agrees to make an independent judgment about the property, the property's value, and/or property descriptions or any other information about the property, and to bid accordingly. e) The Auctioneer may, without in any way diminishing any disclaimers of liability contained in these terms and conditions, and elsewhere, mention within the description of an item or lot, some significant damage, though this may or may not include all faults, imperfections, and/or restorations. f) The Bidder agrees not to base a bid solely upon information provided by the Auctioneer, or its consignor(s). 5. ONLINE AUCTIONS a) Auctioneer shall not be responsible for internet outages, service disruptions, data lag, or other failures of Bidder's bid placed via the internet. The auctioneer may or may not honor such adversely affected bid attempts, at Auctioneer's sole discretion. b) Auctioneer reserves the right, at Auctioneer's sole discretion, to cancel and/or reopen the auction in the case of system failures. 6. LIABILITY a) Safety of operation of any electrical or otherwise powered devices or items sold is not warranted, or guaranteed, in any way. Auctioneer recommends that all electrical or otherwise powered items sold be checked, installed, and or operated by a licensed electrician or other appropriate technician. b) Items sold could, or could not, meet current, or any other, safety standards. Certain items could subject the operator or installer to various hazards, including, but not limited to, non-polarized plugs, lack of grounding conductors, and/or guards missing, malfunctioning, or not acceptable by modern safety standards. Bidder assumes all responsibility to check with appropriate authorities having jurisdiction regarding any/all local codes regarding such devices. Bidder assumes any and all liability for any installation and/or operation of any item purchased. c) Vintage items are sold with a primary use as collector's items, solely intended for display purposes only and, as such, are not recommended for any other practical use. Vintage items could, or could not, meet any safety standards, could be coated with lead paint, could contain lead, or could be made entirely of lead, and also could contain phthalates, or present choking hazards. Bidder agrees, in compliance with the Consumer Product Safety Improvement Act, to buy vintage items as collectibles for display purposes only, and with no intention of using them, selling them to be used, or of allowing them to be used otherwise. Bidder further agrees to assume all liability and responsibility, and to hold harmless the seller and/or the Auctioneer, in the event of injury, harm, or death to anyone as a result of improper use of any item purchased at auction. Bidders must be over 18 years of age. d) Bidders agree that they, and their guests, are attending the auction sale at the Bidder's own risk, exclusively, and agree to indemnify, save and hold harmless the Auctioneer, and its seller(s) and/or consignor(s), from any and all accidents and/or injuries they may receive while attending the auction sale and/or during pickup of auction items. 7. PARTIAL PAYMENT/ NON-PAYMENT a) Any Bidder who does not pay in full upon presentment of an auction invoice is subject, at the discretion of Auctioneer or its consignor(s), to being barred from any future participation in auctions conducted by Auctioneer. b) Auctioneer reserves the right to void an invoice if payment in full is not received within specified time limits. In cases of nonpayment, Auctioneer's election to void a sale does not relieve the Bidder from its obligation to pay the Auctioneer's fees (seller's and buyer's premium) due on the lot(s), and/or any other damages pertaining to the lot(s). c) In the event that Bidder's payment is dishonored upon presentment(s), Bidder shall pay the maximum statutory processing fee set by applicable State of Oklahoma law. d) If any auction invoice submitted by Auctioneer is not paid in full when due, the unpaid balance will bear interest at the highest rate allowed by law from the date of invoice until paid. Any invoices not paid when due will be subject to a three percent (3%) late fee on the invoice amount, or three percent (3%) of any installment that is past due, should payment be accepted on a past-due invoice. e) If Auctioneer refers any invoice to an attorney for collection, the Bidder agrees to pay all attorney fees, court costs, and/or any other collection costs incurred by Auctioneer. If Auctioneer assigns collection to in-house legal staff, such attorney's time expended on the matter shall be compensated at a rate comparable to the hourly rate of independent attorneys. f) In the event a successful Bidder fails to pay any amount due, Auctioneer, at its sole discretion, reserves the right to sell the lot(s) securing the invoice to any under-bidders in the auction in which the lot(s) appeared, or in subsequent private or public sale, or to re-list the lots in a future auction conducted by Auctioneer. The defaulting Bidder agrees to pay for the reasonable costs of resale (including a 35% seller's commission, if consigned to an auction conducted by Auctioneer). The defaulting Bidder is further liable to pay any difference between his/her/its total original invoice for the lot(s), plus any applicable interest, and the net proceeds for the lot(s), if sold at private sale, or the subsequent hammer price of the lot(s), less the 35% seller's commission, if sold at an Auctioneer's auction. g) Auctioneer shall have a lien against the merchandise purchased by the Bidder to secure payment of the auction invoice. Auctioneer is further granted a lien and the right to retain possession of any other property of the Bidder then held by the Auctioneer or its affiliates, to secure payment of any auction invoice or any other amounts due the Auctioneer or its affiliates from the Bidder. h) With respect to payment of auction invoices, the Bidder waives any and all rights of offset he/she/it might otherwise have against the Auctioneer and/or the consignor of the merchandise included on the invoice. If a Bidder owes Auctioneer or its affiliates on any account, Auctioneer and its affiliates shall have the right to offset such unpaid account by any credit balance due the Bidder, and it may secure, by possessory lien, any unpaid amount by any of the Bidders property then held in the Auctioneer or its affiliates' possession. 8. DISPUTES/ARBITRATION a) Auctioneer shall designate the winning bidder after each item is auctioned. Should any dispute arise between two (2) or more Bidders, regarding any matter, Auctioneer reserves the right, and the Bidders grant Auctioneer the right (solely at Auctioneer's discretion), to re-open bidding on the item in question, and/or to resolve any/all questions through the identification, or designation, of the winning bidder and/or the amount of the winning bid. b) Auctioneer and Bidder hereby agree to submit any dispute between Auctioneer and Bidder, arising out of, or relating to, this agreement, to an arbitration panel of three (3) neutral person selected by Auctioneer. If Bidder disapproves of the panel, Bidder shall, within ten (10) days after receiving notice of selection of the panel, initiate arbitration before the American Arbitration Association (AAA), using its rules for commercial arbitrations, with the exception that all AAA fees shall be paid by Bidder. c) If Bidder fails to timely initiate arbitration through AAA, or to pay AAA fees and costs, Auctioneer may resume arbitration through a neutral arbitration panel selected by Auctioneer. d) The decision of arbitration will be final and binding on all parties. 9. LEGAL ACTIONS a) Notwithstanding anything contained in this agreement to the contrary, Auctioneer hereby reserves the right to seek any action against Bidder in a court of competent jurisdiction b) Any action or suit of any kind relating to this agreement must be commenced within one (1) year from the date when the cause of action or claim accrued, or it shall be forever barred. The right of action or suit shall accrue, and the one-year limitation shall begin to run, at the date upon which the breach, damage, or injury is sustained, and not when the resulting cost, damage, harm, or loss is discovered. c) Auctioneer shall not under any circumstances be liable to Bidder for any consequential damages to Bidder, and Bidder shall not hold Auctioneer liable for failure of any successful Bidder to complete transaction. d) Bidder agrees to be responsible for any and all attorney's fees and/or collection fees incurred by seller or Auctioneer as a result of any disputes or actions brought on by Bidder with regard to any auction or auction item. 10. SALES TAX a) When sales tax is applicable, Bidder agrees to pay the Auctioneer the actual amount of tax due in any event where sales tax is not properly collected due to an expired, inaccurate, inappropriate text certificate or declaration, or due to any incorrect interpretation of the applicable statute, or due to any other reason. b) When sales tax is applicable, the appropriate forms or certificate must be on file with and verified by, the Auctioneer five (5) days prior to the auction, or sales tax must be paid. Only if such form or certificate is received by the Auctioneer within four (4) days after the auction, can a refund of sales tax paid be made. Lots originating from different auctions may not be aggregated for sales tax purposes. c) Any motor vehicles offered for sale or subject to any and all applicable state titling and tax laws. Bidder agrees to be responsible for complying with these laws. 11. GOVERNING LAW & JURY WAIVER a) This agreement shall be governed by, and construed in accordance with, the laws of the State of Oklahoma, and any action or proceeding arising hereunder shall be brought in the courts of the State of Oklahoma. b) If any such action or proceeding arises under the Constitution, laws, or treaties of the United States of America, or if there is a diversity of citizenship between the parties hereto, so that suit may be brought in a United States District Court, it shall be brought to the United States District Court in Arapaho, Oklahoma. c) The invalidation of one or more terms of this agreement shall not affect the validity of the remaining terms. d) Auctioneer and its seller(s) hereby waive the right to any jury trial in any action, proceeding, or counterclaim in connection with this agreement brought by either party against the other party. 12. SEVERABILITY Except as expressly provided to the contrary herein, each section, part, term and/or provision of this agreement shall be considered severable; and if, for any reason any section, part, term or provision herein is determined to be invalid, unenforceable or contrary to, or in conflict with, any existing or future law or regulation by a court or agency having valid jurisdiction, such shall not impair the future operation of, or have any other effect upon, such other sections, parts, terms and provisions of this agreement as may remain otherwise intelligible, and the latter shall continue to be given full force and effect and bind the parties hereto; and said invalid or unenforceable sections, parts, terms or provisions shall be deemed to be replaced with a provision that is valid and enforceable and most merely reflects the original intent of the invalid or unenforceable provision.
Listing Information
Chevrolet Dealership Liquidation. This is the second of two personal property auctions selling the GM specialty tools from a Chevrolet dealership in Cordell, OK. There are hundreds of Kent-Moore specialty tools for sale.

1
Bidding is open from Aug. 2nd thru Aug. 21st
*Online bidding begins Thursday, Aug. 2nd at 8:00 am CDT *Bids begin closing Tuesday, Aug 21st at 6:00 pm CDT; all items have a 3-minute soft close and are set to close every 20 seconds.

2
Pickup Location & Dates
*Pick up is on Wednesday, August 22nd from 10:00 am to 3:00 pm (CDT) or on Friday, August 24th from 8:00 am to 1:00 pm (CDT). *Winning Bidders can pick up their purchases at 1707 Glenn English Street, Cordell, OK 73632. *There will not be a pickup ...

595
J-42873
fuel line shutoff adapters

596
J-45517
ball joint installation spacer

597
J-45108
plate, gauge

598
CH-48809
torsion bar unloader

599
J-45001-1
Fuel tank hose

600
J-45027
timing chain tension holder

601
J-45057-2
lower engine support bar

602
J-45059
torque angle adapter

603
J-45101-100
brake rotor run out washers

604
J-45103
axle shifter remover adapters

605
J-45124
puller bridge

606
J-45201
cooler line seal remover

607
J-45184
differential ouput shaft oil seal installer

608
J-45222
axle housing spreader

609
J-45096-30
flush adapter, transflow

610
GE-45126-5
replacement tip set 90 deg.

611
DT-47773
retaining ring pliers adapter

612
GE-45126-5
replacemnet tip set 90 deg.

613
J-45224
side bearing adjuster

614
J-45225
differential seal installer

615
J-45228
pinion bearing race replacer

616
J-45230
pinion setting gauge block

617
J-45231
side bearing instaler

618
J-45232
left needle bearing replacer

619
J-45233
Right needle bearing replacer

620
J-45234
pinion remover

621
J-45235
tone ring installer

622
J-45236
seal instaler and protector

623
J-45237
thrust bearing installer

624
J-45238
thrust bearing installer

625
J-45239
needle bearing instaler

626
J-45265
rear knuckel bushing remover/installer

627
J-45268-117
txv adapter

628
J-45268-121
txv flush adapter

629
J-45341
remover, axel shaft

630
J-45342
axle deflector installer ( 1 pair)

631
J-45358
transfer case housing separator Dp453

632
J-45359
right output shaft seal installer

633
J-45379
output shaft seal installer

634
J-45382
transfer case torque check adapter

635
J-45398
forward clutch inner seal remover

636
J-45399
brake booster adapter

637
J-4540
transmission indicator alignment tool

638
J-45515
brake caliper piston boot seal installer

639
J-45531
axle cv joint remover adapter

640
J-45548
mainshaft support bushing/bearing remover

641
J-45549
mainshaft support bearning instaler

642
J-45706
DANA 70HD/80 Inner pinion bearing race remover

643
J-45725
cradle bushing replacer

644
J-45381
output shaft seal installer

645
J-45758
vavle leash adjusting tool

646
J-45798
steering gear thrust bearing protector tool

647
J-45849
remover, bearing/bushing

648
J-45851
ball joint separator adapters

649
J-45853
wheel bearing & seal installer

650
J-45857
wheel bearing remover

651
J-45860
vses tone ring installer

652
J-45861
ect sensor socket

653
J-45863
caliper piston seal installer

654
J-45830
replacer, bushing

655
J-44870
driveshaft carrier bearing instaler

656
J-45872
brake accumulator piston compressor

657
J-45910
injector tube remover

658
J-45920
car set bracket reshaper

659
J-45930
rear main seal installer

660
J-45938
wheel alignment socket

661
J-45938
alignment socket

662
J-45951
front cover seal installer

663
EN-46119
vavle spring compressor adapter (off vehicle)

664
J-46165
front cover guide pin installation tool

665
EN-46359
puller end protector

666
J-46363
fuel line release tool

667
J-46409
torque converter alignment handle

668
DT-47778
center support retaing ring

669
EN-46577
oxygen sensor remover installer

670
J-46588
axle seal crimp tool

671
J-46594
injector removal tool

672
J-46607
clutch disc and pump rotator aligner

673
EN-46999-1
loma aie pressure adapter

674
GE-47676
HVAC module puller

675
EN-46330
tension retaining pin

676
DT-47562
flywheel holder

677
EL-47564
steering diagnostic harness

678
EN-47719
tensioner compressor

679
DT-47561
bushing, seal installer

680
EN-47589
fuel pressure test adapter

681
DT-47605
trans holding fixture adapter

682
EN-47623
rear main seal installer

683
EN-47699
flywheel holding tool

684
EL-47728
steering column lock actuator

685
DT-47731
engine coil cooler release tool

686
J-42628
spring compressor plate

687
J-42675
flat wire probe adapter

688
J-42737
sector bearing installer

689
J-42738
front output shaft seal installer

690
J-42759
IGN switch conn release tool

691
J-42841
rear oil seal remover

692
J-42842
rear crankshaft oil seal installer

693
J-42863
vavle seal installer

694
J-42872
fill limiter vent vavle remover

695
J-42873
fue line shutoff adapters

696
J-42882
p/s adjuster nut wrench

697
J-42960
fuel tank siphoning hose

698
J-42940
fuel tank torque wrench (3mm)

699
J-42943
drive axle separator

700
J-42982
fuel pressure adapater

701
J-42991
strut rod socket

702
J-43010
balancer puller adapter

703
J-43070
Oil Pressure adapter

704
J-43031
engine life bracket

705
J-43032
crankshaft socket

706
J-43059
vavle keeper r/i

707
J-43074
spring compressor

709
J-43094
spark plug boot puller

710
J-43114
abs plug octoganal set

711
J-43181
heater line quick connect release

712
J-43184
valve spring compressor adapter

713
J-43204
valve guide seal installer

714
J-43241
remote keyless entry tester

715
J-43244
relay puller

716
J-43288
fill limiter vent vavle tool

717
J-43298
ignition module tester

718
J-43298-40
ignition module test harness

719
J-43300
torque rod adjuster GM specialty tool

720
J-43425
output haft load tool adapter

721
J-43435
p/s adjuster locknut wrench

722
J-43442
flywheel holder

723
J-43604
extractor

724
J-43649-10
valve spring compressor adapter set

725
J-43648
evap pressure/purge fitting

726
J-43649
valve spring compressor (on car)

727
J-43484
output shaft seal installer

728
J-43650
balance shaft bearing rem & installer

729
J-43651
water pump holding tool

730
J-43653
flywheel holding tool

731
J-43655
sprocket holding tool

732
J-43708
ims alignment plate

733
J-44732
output shaft seal installer

734
J-43773
valve body spring compressor

735
J-43799
breakout box adapter

736
J-43822
shock support tool

737
J-43845
pressure gauge adapter

738
J-43846
air pressure regulator

739
J-43847
differential adapter

740
J-43885
caliper seal installer

741
J-43921-B
tool organizer cd-rom


743
J-43931
diesel pump control unit remover & installer

744
J-43963
valve spring compressor (off car)

745
J-43965
timesert extensions

746
J-44015
steering linkage installer

747
J-44089
master cylinder bleeder cap adapter

748
J-44152
jumper harness

749
J-44211
on car valve spring compressor

750
J-44212
camshaft holding tool

751
J-44213
sprocket holding tool

752
J-44214
flywheel holding tool

753
J-44215
rear main seal installer

754
J-44228-3
valve spring compressor adapter (on vehicle)

755
J-44217
chain holder set

756
J-44246
solenoid teting kit

757
J-44220-upd
update kit

759
J-44246-10
Solenoid test cable

760
J-44284
fuel door check valve opener

761
J-44298
air bag release tool

762
J-44338
high current probes

763
J-44339
reverse synchonizer installer

764
J-44340
bearing insstaller

765
J-44363
sunroof alignment pins

766
J-44394
axle seal protector (10)

767
J-44427
spanner wrench

768
J-44465
transmission holding fixture adapter

769
J-44467
Output shaft puller adaptor

770
J-44472
end play measuring tool

771
J-44485
brake booster rod adjuster

772
J-44536-1
and J-44536-2

773
J-44538
torx 30 plus socket

774
J-44540
bearing/tone ring installer

775
J-44570-A
bushing replacer

776
J-44571
front clutch seal protector

777
J-44586
p/s seal remover/installer

778
J-44602
injector tester

779
J-44603
noid light

780
J-44721-20
p/s analyzer GEO adapters

781
J-44664
1/2 inch drive crowsfoot wrench 33mm

782
J-44665-2
time rod spanner

783
J-44685
rear axle seal and bearing remover

784
J-44714-A
pinion bearing replacer

785
J-44723
Allison transmission adapter plate

786
J-44732
output shaft seal installer

787
J-44811
unloader, belt tensioner

788
J-44747
clutch alignment arbor

789
J-44748
seal remover

790
J-44766
seal remover

791
J-44827
trans. Clr. Quick disconnect

792
J-44851
pinion shaft seal installer

793
J-44852
front clutch pack seal instaler

794
J-44866
support bushing remover instaler

795
J-44872
pinion shaft seal installer

796
J-44873-2
pinion flange holder and remover bolt

797
J-44882
pinion remover

798
J-44887
oil filter cap tool

799
J-44894-A
brake bleeder adapter set

800
CH-49794
axle hub nut socket

801
DT-50289
installer, hub seal

802
DT-50291
installer, outer hub bearing

803
DT-50292
installer, inner bearing cup

804
J-45096-40
flexible fluid filler transmission

805
EN-51380
rear main seal installer tool

806
EN-49204
crankshaft rear oil seal installer

807
KM-454-B
remover/installer

808
DT-47735
Holder, flange

809
DT-50648-A
seal installer transfer case input shaft

810
J-45859
driveshaft and hub remover

811
CH-47960-10
Caster Gauge adapter

812
J-45010
installer, bearing

813
DT-51255
bearing cup remover

814
J-41665-1A
installer

815
J-41479-10
installer, rear crank seal

816
EN-51097
clip, injector retaining

817
EL-48571-30
adapter HV pinout box

818
DT-51175
aligner, neutral range switch

819
DT-47791-B
installer, torque converter hub seal

820
EN-48278
fuel pump lock ring tool

821
DT-51381
Tool, ELSD bleed

822
EN-50172
front crank seal installer

823
GE-41415-60
adapter, induction system/evap leak test

824
CH-50168-A
puller, steering wheel

825
EN-50791
injector to rail installer

826
EN-49248
assembly, injector rail

827
DT-50871
installer, pinion seal

828
EN-51092
gauge, fuel pump alignment

829
EN-51105
installer/sizer, injector seal

830
EN-51096
remover, rear crank seal

831
CH-37287-1A
adapter, fuel pressure 3/8"

832
J-45096-55
transmission cooler flusher machine adapter hoses

833
DT-22888-60
puller adapter set

834
EN-28467-301
support adapter

835
DT-51076
bearing & gear installer

836
DT-50302-A
lifter, rotor assembly

837
multiple
DT-50955, CH-50377, J-45747, EN-50175, CH-50375, DT-46496, EN-46333, CH-49240-2, CH-50378, CH-49240-1A, CH-49240-3, DT-50199, J-43966, J-39802

838
GE-50576-A
Tester, acousticbelt tension

839
multiple
EN-46999-15, EN-51091, EN-46999, 48059, EN-46999-18, DT-48145, EN-50171, CH-50559

840
multiple
EN-48488, 50790, 50837, 50792, 50656, 50793, 50820, J-43405-2, 43405-1, 42067-A, 28467-500, KM-6179, 960, 235-6

841
EN-28467-40
support brackets

842
books
service manuals

843
J-44551-50
a/c suction screen svc kit

844
DT-51076-10
installer adapter kit

845
CH-47976
active fuel injector tester

846
CH-48358
control arm bushing replacer

847
KM-658-1
rear main seal installer

848
EN-47639
Rear crank protector

849
EN-46114
engine lift brackets

850
CH-47672-A
cradle bushing replacer

851
DT-47825-20
harness, techm jumper

852
DT-47734
speed sensor harness tether

853
EN-46999-6
air pressure adaptor

854
J-45725-A
bushing installer

855
EN-51632
retainer, camshaft

856
J-38522-A
vehicle signal generator

857
J-33432
leaf spring compressor

858
EN-46109
guide pin set

859
EN-46104
water pump holding tool

860
EN-48383
camshaft retaining tool

861
EN-48589-A
socket,crankshaft hub

862
EN-51267
Aligner, oil pump housing

863
DT-51323
installer, differential seal

864
CH-48096
EVAP access port tool

865
DT-50649
install, front output seal

866
EN-48268
main bearing cap remover

867
EN-4610
spark plub tube seal guide

868
J-24254-A
installer, rear axle seal

869
DT-48550
remover, manual shaft pin

870
DT-48021
installer, sector bearing

871
DT-48210
installer, seal

872
KM-527-A
transmission linkage adjuster adjustment sliver tool

873
multiple
DT-47540, 47541, 47542, 47543, DW-340-120-01, -02, -03, -04

874
J-41816-3
puller legs

875
DT-48077 & 8
installer, output flange

876
EN-48869
front crankshaft seal install

877
EN-48260
piston ring compressor

878
multiple
DT-48802, DT-48827, J-39441

879
EN-46110
Valve spring compressor

880
EN-48585
balancr installation guide

881
EN-48672-1
specialty tool rear seal remover

882
DT-50290
installer, outer bearing

883
DT-48734
replacer, extension housing bushing

884
EN-48266
injector seal

885
DT-48094
shaft installation guide

886
J-37281-A
remover, injector

887
EN-46745-4
piston pin clip pepl adapter

888
J-26941
bearing & seal remover

889
J-45124-10
puller leg set, GM Dealer

890
DT-48146
pinion cartridge press support

891
multiple
DT-48074, 48075, 48076

892
EN-48803
installer, camshaft oil seal

893
J-08614-20
bolts, output flange retaining

894
DT-49027
coil pin replacer

895
DT-49267
Alignment arbor, clutch

896
J-46629
axle seal installer

897
J-41480-5
front & rear cover mod template

898
EN-48313
timing chain retainer

899
DT-48094
shaft installation guide

900
multiple
Hypertech power programmer, data update CDs, essential tool shipment, and more

901
DT-51791
front cover removal adapters

902
EN-48898
supercharger lifting fixture


904
EN-48589-A
crankshaft hub socket

905
EN-46106
flywheel holder

906
J-45019
pinion cartridge remover

907
DT-50802
installer, output shaft grease can

908
J-29184
oil seal installer

909
EN-46112
tensioner retraction pins (set of 3)

910
EN-46109
guide pin set

911
EN-46121
connecting rod, guide pin set

912
EN-47966
camshaft position actuator valve seal remover

913
EN-46104
water pump pulley holder

914
EN-46117
valve stem key remover and installer

915
EN-46116
valve stem seal remover and installer

916
KM-6263
SAC clutch remover installer tool

917
Books
GM Service Manuals & Bulletins

919
EL-47955-1
Loopback Adapter, GM Lock-Tite,

920
EL-50115
Battery Lift Adapter

921
EL-48264-A
Battery pack lifting adapter

922
J-43690
rod bearing check tool adapter

923
J-36462-A
engine support adapter

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Other Sales by
This Company

Apr 20 - Apr 30
Clinton, OK


Apr 30
Butler, OK



Sponsored Links

Chevrolet Dealership Liquidation #2

United Country Heard Auction & Real Estate, LLC

United Country Heard Auction & Real Estate, LLC


Contact:
Phone: 580-323-6120
Sale Location
1707 N Glenn English Street
Cordell, OK 73632
Sale Dates and Times
Sale Terms and Conditions
The following terms and conditions apply to all auctions conducted by United Country Heard Auction and Real Estate, it's employees, agents, and assigns (Auctioneer), and any participants, their employees, agents, and assigns (Bidder), in said auctions, unless otherwise stipulated by the Auctioneer within any additional terms and conditions specifically expressed in regard to any single auction. By registering for, and participating in, this auction, Bidder acknowledges these terms and conditions and consents to abide by them, as well as any other/additional terms and conditions expressed specifically elsewhere within any auction listing. Terms and Conditions: 1. GENERAL AUCTION INFORMATION a) ALL ITEMS on the auction sell subject to the Auction Co.'s acceptance or rejection of the high bid. b) All items sold at auction conducted by Auctioneer are sold strictly on an "as-is-where-is" basis (shipping, packing, and/or loading are not included). c) Auctioneer and/or its consignor(s) reserve the right to add, delete, or alter any auction item prior to the opening of the auction. d) Neither the Auctioneer, nor its consignor(s), will recognize, or be held liable for, any claims for theft, damage, or loss once an item has been awarded and Bidder payment has been received. e) Auctioneer DOES NOT SHIP ALL items. Bidder is responsible for any/all shipping costs assessed by the auctioneer, when available. All non-shipped items must be picked up from auction site by Bidder, or authorized Bidder representative, at designated date and time. See Auction info for specific auction details. f) Items not picked up by Bidder, or authorized Bidder representative, within stipulated time frame, regardless of payment, will be subject to a storage rate of ($10) per item, per day, and may be re-sold, at Auctioneer's sole discretion, to pay for storage costs. 2. PURCHASES/FEES a) All sales are final and no sale shall be invalidated. There are no returns or refunds, and credit payments cannot be reversed. b) A thirteen percent (13%) Buyers Premium will be applied to ALL purchases. c) ALL internet/online purchases may be subject to a per-item internet/handling fee. The auctioneer will list this fee, when applicable, in the shipping/pickup information section of the auction listing. d) All funds are to be paid in USD. Bidder is responsible for and agrees to pay, all duties, custom, taxes, and any other fees associated with the purchase of any item. e) Bidder agrees to pay for all items before removing any items from the auction site. 3. PAYMENT a.) All purchases must be paid in full by end of auction. Acceptable method of payment is by credit card. All funds will be paid in USD. (13%) Buyer's Premium will be applied to ALL purchases. b.) Bidder is responsible for and agrees to pay, all duties, custom, taxes, and any other fees associated with the purchase of any item. All sales are final, and no sale shall be invalidated. There are no returns or refunds, and credit payments cannot be reversed. c.) Buyers will be charged 9.5% tax on all items purchased. 4. ITEM DESCRIPTIONS a) Neither the Auctioneer nor its consignor(s), make any guarantees, warranties or representations, expressed or implied, with respect to the property being sold, except as to the warranty of title. All implied warranties of merchantability, and/or fitness for purpose, are specifically disclaimed by the Auctioneer and its consignor(s). b) Specifically, neither the Auctioneer, nor its consignors, makes any representation or warranty of any kind, expressed or implied, with respect to any of the following characteristics of property: age, authenticity, genuineness, attribution, provenance, origin, physical condition, importance, size, quality, quantity, rarity, value exhibitions, historical references or significance, medium, material, culture, or source origin. c) All information within any catalog, sale bill, auction listing, advertising, website, or elsewhere is offered to the Bidder as a statement of opinion only. It is not intended to contain statements of fact for which the Auctioneer or its consignor(s) may be held liable. This disclaimer of liability on the Auctioneer's part applies whether the information is included in any catalog, sale bill, or website, and extends any advertisements, announcements, or communications through our representatives, bills of sale, or elsewhere, and regardless of whether written or oral. d) Neither the Auctioneer nor its consignor(s), shall be responsible for the correctness or accuracy of descriptions or other information in any catalog or elsewhere. The Bidder assumes full responsibility to inspect and to evaluate the property to its, his, or her, complete satisfaction prior to any bid or purchase. The Bidder agrees to make an independent judgment about the property, the property's value, and/or property descriptions or any other information about the property, and to bid accordingly. e) The Auctioneer may, without in any way diminishing any disclaimers of liability contained in these terms and conditions, and elsewhere, mention within the description of an item or lot, some significant damage, though this may or may not include all faults, imperfections, and/or restorations. f) The Bidder agrees not to base a bid solely upon information provided by the Auctioneer, or its consignor(s). 5. ONLINE AUCTIONS a) Auctioneer shall not be responsible for internet outages, service disruptions, data lag, or other failures of Bidder's bid placed via the internet. The auctioneer may or may not honor such adversely affected bid attempts, at Auctioneer's sole discretion. b) Auctioneer reserves the right, at Auctioneer's sole discretion, to cancel and/or reopen the auction in the case of system failures. 6. LIABILITY a) Safety of operation of any electrical or otherwise powered devices or items sold is not warranted, or guaranteed, in any way. Auctioneer recommends that all electrical or otherwise powered items sold be checked, installed, and or operated by a licensed electrician or other appropriate technician. b) Items sold could, or could not, meet current, or any other, safety standards. Certain items could subject the operator or installer to various hazards, including, but not limited to, non-polarized plugs, lack of grounding conductors, and/or guards missing, malfunctioning, or not acceptable by modern safety standards. Bidder assumes all responsibility to check with appropriate authorities having jurisdiction regarding any/all local codes regarding such devices. Bidder assumes any and all liability for any installation and/or operation of any item purchased. c) Vintage items are sold with a primary use as collector's items, solely intended for display purposes only and, as such, are not recommended for any other practical use. Vintage items could, or could not, meet any safety standards, could be coated with lead paint, could contain lead, or could be made entirely of lead, and also could contain phthalates, or present choking hazards. Bidder agrees, in compliance with the Consumer Product Safety Improvement Act, to buy vintage items as collectibles for display purposes only, and with no intention of using them, selling them to be used, or of allowing them to be used otherwise. Bidder further agrees to assume all liability and responsibility, and to hold harmless the seller and/or the Auctioneer, in the event of injury, harm, or death to anyone as a result of improper use of any item purchased at auction. Bidders must be over 18 years of age. d) Bidders agree that they, and their guests, are attending the auction sale at the Bidder's own risk, exclusively, and agree to indemnify, save and hold harmless the Auctioneer, and its seller(s) and/or consignor(s), from any and all accidents and/or injuries they may receive while attending the auction sale and/or during pickup of auction items. 7. PARTIAL PAYMENT/ NON-PAYMENT a) Any Bidder who does not pay in full upon presentment of an auction invoice is subject, at the discretion of Auctioneer or its consignor(s), to being barred from any future participation in auctions conducted by Auctioneer. b) Auctioneer reserves the right to void an invoice if payment in full is not received within specified time limits. In cases of nonpayment, Auctioneer's election to void a sale does not relieve the Bidder from its obligation to pay the Auctioneer's fees (seller's and buyer's premium) due on the lot(s), and/or any other damages pertaining to the lot(s). c) In the event that Bidder's payment is dishonored upon presentment(s), Bidder shall pay the maximum statutory processing fee set by applicable State of Oklahoma law. d) If any auction invoice submitted by Auctioneer is not paid in full when due, the unpaid balance will bear interest at the highest rate allowed by law from the date of invoice until paid. Any invoices not paid when due will be subject to a three percent (3%) late fee on the invoice amount, or three percent (3%) of any installment that is past due, should payment be accepted on a past-due invoice. e) If Auctioneer refers any invoice to an attorney for collection, the Bidder agrees to pay all attorney fees, court costs, and/or any other collection costs incurred by Auctioneer. If Auctioneer assigns collection to in-house legal staff, such attorney's time expended on the matter shall be compensated at a rate comparable to the hourly rate of independent attorneys. f) In the event a successful Bidder fails to pay any amount due, Auctioneer, at its sole discretion, reserves the right to sell the lot(s) securing the invoice to any under-bidders in the auction in which the lot(s) appeared, or in subsequent private or public sale, or to re-list the lots in a future auction conducted by Auctioneer. The defaulting Bidder agrees to pay for the reasonable costs of resale (including a 35% seller's commission, if consigned to an auction conducted by Auctioneer). The defaulting Bidder is further liable to pay any difference between his/her/its total original invoice for the lot(s), plus any applicable interest, and the net proceeds for the lot(s), if sold at private sale, or the subsequent hammer price of the lot(s), less the 35% seller's commission, if sold at an Auctioneer's auction. g) Auctioneer shall have a lien against the merchandise purchased by the Bidder to secure payment of the auction invoice. Auctioneer is further granted a lien and the right to retain possession of any other property of the Bidder then held by the Auctioneer or its affiliates, to secure payment of any auction invoice or any other amounts due the Auctioneer or its affiliates from the Bidder. h) With respect to payment of auction invoices, the Bidder waives any and all rights of offset he/she/it might otherwise have against the Auctioneer and/or the consignor of the merchandise included on the invoice. If a Bidder owes Auctioneer or its affiliates on any account, Auctioneer and its affiliates shall have the right to offset such unpaid account by any credit balance due the Bidder, and it may secure, by possessory lien, any unpaid amount by any of the Bidders property then held in the Auctioneer or its affiliates' possession. 8. DISPUTES/ARBITRATION a) Auctioneer shall designate the winning bidder after each item is auctioned. Should any dispute arise between two (2) or more Bidders, regarding any matter, Auctioneer reserves the right, and the Bidders grant Auctioneer the right (solely at Auctioneer's discretion), to re-open bidding on the item in question, and/or to resolve any/all questions through the identification, or designation, of the winning bidder and/or the amount of the winning bid. b) Auctioneer and Bidder hereby agree to submit any dispute between Auctioneer and Bidder, arising out of, or relating to, this agreement, to an arbitration panel of three (3) neutral person selected by Auctioneer. If Bidder disapproves of the panel, Bidder shall, within ten (10) days after receiving notice of selection of the panel, initiate arbitration before the American Arbitration Association (AAA), using its rules for commercial arbitrations, with the exception that all AAA fees shall be paid by Bidder. c) If Bidder fails to timely initiate arbitration through AAA, or to pay AAA fees and costs, Auctioneer may resume arbitration through a neutral arbitration panel selected by Auctioneer. d) The decision of arbitration will be final and binding on all parties. 9. LEGAL ACTIONS a) Notwithstanding anything contained in this agreement to the contrary, Auctioneer hereby reserves the right to seek any action against Bidder in a court of competent jurisdiction b) Any action or suit of any kind relating to this agreement must be commenced within one (1) year from the date when the cause of action or claim accrued, or it shall be forever barred. The right of action or suit shall accrue, and the one-year limitation shall begin to run, at the date upon which the breach, damage, or injury is sustained, and not when the resulting cost, damage, harm, or loss is discovered. c) Auctioneer shall not under any circumstances be liable to Bidder for any consequential damages to Bidder, and Bidder shall not hold Auctioneer liable for failure of any successful Bidder to complete transaction. d) Bidder agrees to be responsible for any and all attorney's fees and/or collection fees incurred by seller or Auctioneer as a result of any disputes or actions brought on by Bidder with regard to any auction or auction item. 10. SALES TAX a) When sales tax is applicable, Bidder agrees to pay the Auctioneer the actual amount of tax due in any event where sales tax is not properly collected due to an expired, inaccurate, inappropriate text certificate or declaration, or due to any incorrect interpretation of the applicable statute, or due to any other reason. b) When sales tax is applicable, the appropriate forms or certificate must be on file with and verified by, the Auctioneer five (5) days prior to the auction, or sales tax must be paid. Only if such form or certificate is received by the Auctioneer within four (4) days after the auction, can a refund of sales tax paid be made. Lots originating from different auctions may not be aggregated for sales tax purposes. c) Any motor vehicles offered for sale or subject to any and all applicable state titling and tax laws. Bidder agrees to be responsible for complying with these laws. 11. GOVERNING LAW & JURY WAIVER a) This agreement shall be governed by, and construed in accordance with, the laws of the State of Oklahoma, and any action or proceeding arising hereunder shall be brought in the courts of the State of Oklahoma. b) If any such action or proceeding arises under the Constitution, laws, or treaties of the United States of America, or if there is a diversity of citizenship between the parties hereto, so that suit may be brought in a United States District Court, it shall be brought to the United States District Court in Arapaho, Oklahoma. c) The invalidation of one or more terms of this agreement shall not affect the validity of the remaining terms. d) Auctioneer and its seller(s) hereby waive the right to any jury trial in any action, proceeding, or counterclaim in connection with this agreement brought by either party against the other party. 12. SEVERABILITY Except as expressly provided to the contrary herein, each section, part, term and/or provision of this agreement shall be considered severable; and if, for any reason any section, part, term or provision herein is determined to be invalid, unenforceable or contrary to, or in conflict with, any existing or future law or regulation by a court or agency having valid jurisdiction, such shall not impair the future operation of, or have any other effect upon, such other sections, parts, terms and provisions of this agreement as may remain otherwise intelligible, and the latter shall continue to be given full force and effect and bind the parties hereto; and said invalid or unenforceable sections, parts, terms or provisions shall be deemed to be replaced with a provision that is valid and enforceable and most merely reflects the original intent of the invalid or unenforceable provision.
Listing Details
Chevrolet Dealership Liquidation. This is the second of two personal property auctions selling the GM specialty tools from a Chevrolet dealership in Cordell, OK. There are hundreds of Kent-Moore specialty tools for sale.

1
Bidding is open from Aug. 2nd thru Aug. 21st
*Online bidding begins Thursday, Aug. 2nd at 8:00 am CDT *Bids begin closing Tuesday, Aug 21st at 6:00 pm CDT; all items have a 3-minute soft close and are set to close every 20 seconds.

2
Pickup Location & Dates
*Pick up is on Wednesday, August 22nd from 10:00 am to 3:00 pm (CDT) or on Friday, August 24th from 8:00 am to 1:00 pm (CDT). *Winning Bidders can pick up their purchases at 1707 Glenn English Street, Cordell, OK 73632. *There will not be a pickup ...

595
J-42873
fuel line shutoff adapters

596
J-45517
ball joint installation spacer

597
J-45108
plate, gauge

598
CH-48809
torsion bar unloader

599
J-45001-1
Fuel tank hose

600
J-45027
timing chain tension holder

601
J-45057-2
lower engine support bar

602
J-45059
torque angle adapter

603
J-45101-100
brake rotor run out washers

604
J-45103
axle shifter remover adapters

605
J-45124
puller bridge

606
J-45201
cooler line seal remover

607
J-45184
differential ouput shaft oil seal installer

608
J-45222
axle housing spreader

609
J-45096-30
flush adapter, transflow

610
GE-45126-5
replacement tip set 90 deg.

611
DT-47773
retaining ring pliers adapter

612
GE-45126-5
replacemnet tip set 90 deg.

613
J-45224
side bearing adjuster

614
J-45225
differential seal installer

615
J-45228
pinion bearing race replacer

616
J-45230
pinion setting gauge block

617
J-45231
side bearing instaler

618
J-45232
left needle bearing replacer

619
J-45233
Right needle bearing replacer

620
J-45234
pinion remover

621
J-45235
tone ring installer

622
J-45236
seal instaler and protector

623
J-45237
thrust bearing installer

624
J-45238
thrust bearing installer

625
J-45239
needle bearing instaler

626
J-45265
rear knuckel bushing remover/installer

627
J-45268-117
txv adapter

628
J-45268-121
txv flush adapter

629
J-45341
remover, axel shaft

630
J-45342
axle deflector installer ( 1 pair)

631
J-45358
transfer case housing separator Dp453

632
J-45359
right output shaft seal installer

633
J-45379
output shaft seal installer

634
J-45382
transfer case torque check adapter

635
J-45398
forward clutch inner seal remover

636
J-45399
brake booster adapter

637
J-4540
transmission indicator alignment tool

638
J-45515
brake caliper piston boot seal installer

639
J-45531
axle cv joint remover adapter

640
J-45548
mainshaft support bushing/bearing remover

641
J-45549
mainshaft support bearning instaler

642
J-45706
DANA 70HD/80 Inner pinion bearing race remover

643
J-45725
cradle bushing replacer

644
J-45381
output shaft seal installer

645
J-45758
vavle leash adjusting tool

646
J-45798
steering gear thrust bearing protector tool

647
J-45849
remover, bearing/bushing

648
J-45851
ball joint separator adapters

649
J-45853
wheel bearing & seal installer

650
J-45857
wheel bearing remover

651
J-45860
vses tone ring installer

652
J-45861
ect sensor socket

653
J-45863
caliper piston seal installer

654
J-45830
replacer, bushing

655
J-44870
driveshaft carrier bearing instaler

656
J-45872
brake accumulator piston compressor

657
J-45910
injector tube remover

658
J-45920
car set bracket reshaper

659
J-45930
rear main seal installer

660
J-45938
wheel alignment socket

661
J-45938
alignment socket

662
J-45951
front cover seal installer

663
EN-46119
vavle spring compressor adapter (off vehicle)

664
J-46165
front cover guide pin installation tool

665
EN-46359
puller end protector

666
J-46363
fuel line release tool

667
J-46409
torque converter alignment handle

668
DT-47778
center support retaing ring

669
EN-46577
oxygen sensor remover installer

670
J-46588
axle seal crimp tool

671
J-46594
injector removal tool

672
J-46607
clutch disc and pump rotator aligner

673
EN-46999-1
loma aie pressure adapter

674
GE-47676
HVAC module puller

675
EN-46330
tension retaining pin

676
DT-47562
flywheel holder

677
EL-47564
steering diagnostic harness

678
EN-47719
tensioner compressor

679
DT-47561
bushing, seal installer

680
EN-47589
fuel pressure test adapter

681
DT-47605
trans holding fixture adapter

682
EN-47623
rear main seal installer

683
EN-47699
flywheel holding tool

684
EL-47728
steering column lock actuator

685
DT-47731
engine coil cooler release tool

686
J-42628
spring compressor plate

687
J-42675
flat wire probe adapter

688
J-42737
sector bearing installer

689
J-42738
front output shaft seal installer

690
J-42759
IGN switch conn release tool

691
J-42841
rear oil seal remover

692
J-42842
rear crankshaft oil seal installer

693
J-42863
vavle seal installer

694
J-42872
fill limiter vent vavle remover

695
J-42873
fue line shutoff adapters

696
J-42882
p/s adjuster nut wrench

697
J-42960
fuel tank siphoning hose

698
J-42940
fuel tank torque wrench (3mm)

699
J-42943
drive axle separator

700
J-42982
fuel pressure adapater

701
J-42991
strut rod socket

702
J-43010
balancer puller adapter

703
J-43070
Oil Pressure adapter

704
J-43031
engine life bracket

705
J-43032
crankshaft socket

706
J-43059
vavle keeper r/i

707
J-43074
spring compressor

709
J-43094
spark plug boot puller

710
J-43114
abs plug octoganal set

711
J-43181
heater line quick connect release

712
J-43184
valve spring compressor adapter

713
J-43204
valve guide seal installer

714
J-43241
remote keyless entry tester

715
J-43244
relay puller

716
J-43288
fill limiter vent vavle tool

717
J-43298
ignition module tester

718
J-43298-40
ignition module test harness

719
J-43300
torque rod adjuster GM specialty tool

720
J-43425
output haft load tool adapter

721
J-43435
p/s adjuster locknut wrench

722
J-43442
flywheel holder

723
J-43604
extractor

724
J-43649-10
valve spring compressor adapter set

725
J-43648
evap pressure/purge fitting

726
J-43649
valve spring compressor (on car)

727
J-43484
output shaft seal installer

728
J-43650
balance shaft bearing rem & installer

729
J-43651
water pump holding tool

730
J-43653
flywheel holding tool

731
J-43655
sprocket holding tool

732
J-43708
ims alignment plate

733
J-44732
output shaft seal installer

734
J-43773
valve body spring compressor

735
J-43799
breakout box adapter

736
J-43822
shock support tool

737
J-43845
pressure gauge adapter

738
J-43846
air pressure regulator

739
J-43847
differential adapter

740
J-43885
caliper seal installer

741
J-43921-B
tool organizer cd-rom


743
J-43931
diesel pump control unit remover & installer

744
J-43963
valve spring compressor (off car)

745
J-43965
timesert extensions

746
J-44015
steering linkage installer

747
J-44089
master cylinder bleeder cap adapter

748
J-44152
jumper harness

749
J-44211
on car valve spring compressor

750
J-44212
camshaft holding tool

751
J-44213
sprocket holding tool

752
J-44214
flywheel holding tool

753
J-44215
rear main seal installer

754
J-44228-3
valve spring compressor adapter (on vehicle)

755
J-44217
chain holder set

756
J-44246
solenoid teting kit

757
J-44220-upd
update kit

759
J-44246-10
Solenoid test cable

760
J-44284
fuel door check valve opener

761
J-44298
air bag release tool

762
J-44338
high current probes

763
J-44339
reverse synchonizer installer

764
J-44340
bearing insstaller

765
J-44363
sunroof alignment pins

766
J-44394
axle seal protector (10)

767
J-44427
spanner wrench

768
J-44465
transmission holding fixture adapter

769
J-44467
Output shaft puller adaptor

770
J-44472
end play measuring tool

771
J-44485
brake booster rod adjuster

772
J-44536-1
and J-44536-2

773
J-44538
torx 30 plus socket

774
J-44540
bearing/tone ring installer

775
J-44570-A
bushing replacer

776
J-44571
front clutch seal protector

777
J-44586
p/s seal remover/installer

778
J-44602
injector tester

779
J-44603
noid light

780
J-44721-20
p/s analyzer GEO adapters

781
J-44664
1/2 inch drive crowsfoot wrench 33mm

782
J-44665-2
time rod spanner

783
J-44685
rear axle seal and bearing remover

784
J-44714-A
pinion bearing replacer

785
J-44723
Allison transmission adapter plate

786
J-44732
output shaft seal installer

787
J-44811
unloader, belt tensioner

788
J-44747
clutch alignment arbor

789
J-44748
seal remover

790
J-44766
seal remover

791
J-44827
trans. Clr. Quick disconnect

792
J-44851
pinion shaft seal installer

793
J-44852
front clutch pack seal instaler

794
J-44866
support bushing remover instaler

795
J-44872
pinion shaft seal installer

796
J-44873-2
pinion flange holder and remover bolt

797
J-44882
pinion remover

798
J-44887
oil filter cap tool

799
J-44894-A
brake bleeder adapter set

800
CH-49794
axle hub nut socket

801
DT-50289
installer, hub seal

802
DT-50291
installer, outer hub bearing

803
DT-50292
installer, inner bearing cup

804
J-45096-40
flexible fluid filler transmission

805
EN-51380
rear main seal installer tool

806
EN-49204
crankshaft rear oil seal installer

807
KM-454-B
remover/installer

808
DT-47735
Holder, flange

809
DT-50648-A
seal installer transfer case input shaft

810
J-45859
driveshaft and hub remover

811
CH-47960-10
Caster Gauge adapter

812
J-45010
installer, bearing

813
DT-51255
bearing cup remover

814
J-41665-1A
installer

815
J-41479-10
installer, rear crank seal

816
EN-51097
clip, injector retaining

817
EL-48571-30
adapter HV pinout box

818
DT-51175
aligner, neutral range switch

819
DT-47791-B
installer, torque converter hub seal

820
EN-48278
fuel pump lock ring tool

821
DT-51381
Tool, ELSD bleed

822
EN-50172
front crank seal installer

823
GE-41415-60
adapter, induction system/evap leak test

824
CH-50168-A
puller, steering wheel

825
EN-50791
injector to rail installer

826
EN-49248
assembly, injector rail

827
DT-50871
installer, pinion seal

828
EN-51092
gauge, fuel pump alignment

829
EN-51105
installer/sizer, injector seal

830
EN-51096
remover, rear crank seal

831
CH-37287-1A
adapter, fuel pressure 3/8"

832
J-45096-55
transmission cooler flusher machine adapter hoses

833
DT-22888-60
puller adapter set

834
EN-28467-301
support adapter

835
DT-51076
bearing & gear installer

836
DT-50302-A
lifter, rotor assembly

837
multiple
DT-50955, CH-50377, J-45747, EN-50175, CH-50375, DT-46496, EN-46333, CH-49240-2, CH-50378, CH-49240-1A, CH-49240-3, DT-50199, J-43966, J-39802

838
GE-50576-A
Tester, acousticbelt tension

839
multiple
EN-46999-15, EN-51091, EN-46999, 48059, EN-46999-18, DT-48145, EN-50171, CH-50559

840
multiple
EN-48488, 50790, 50837, 50792, 50656, 50793, 50820, J-43405-2, 43405-1, 42067-A, 28467-500, KM-6179, 960, 235-6

841
EN-28467-40
support brackets

842
books
service manuals

843
J-44551-50
a/c suction screen svc kit

844
DT-51076-10
installer adapter kit

845
CH-47976
active fuel injector tester

846
CH-48358
control arm bushing replacer

847
KM-658-1
rear main seal installer

848
EN-47639
Rear crank protector

849
EN-46114
engine lift brackets

850
CH-47672-A
cradle bushing replacer

851
DT-47825-20
harness, techm jumper

852
DT-47734
speed sensor harness tether

853
EN-46999-6
air pressure adaptor

854
J-45725-A
bushing installer

855
EN-51632
retainer, camshaft

856
J-38522-A
vehicle signal generator

857
J-33432
leaf spring compressor

858
EN-46109
guide pin set

859
EN-46104
water pump holding tool

860
EN-48383
camshaft retaining tool

861
EN-48589-A
socket,crankshaft hub

862
EN-51267
Aligner, oil pump housing

863
DT-51323
installer, differential seal

864
CH-48096
EVAP access port tool

865
DT-50649
install, front output seal

866
EN-48268
main bearing cap remover

867
EN-4610
spark plub tube seal guide

868
J-24254-A
installer, rear axle seal

869
DT-48550
remover, manual shaft pin

870
DT-48021
installer, sector bearing

871
DT-48210
installer, seal

872
KM-527-A
transmission linkage adjuster adjustment sliver tool

873
multiple
DT-47540, 47541, 47542, 47543, DW-340-120-01, -02, -03, -04

874
J-41816-3
puller legs

875
DT-48077 & 8
installer, output flange

876
EN-48869
front crankshaft seal install

877
EN-48260
piston ring compressor

878
multiple
DT-48802, DT-48827, J-39441

879
EN-46110
Valve spring compressor

880
EN-48585
balancr installation guide

881
EN-48672-1
specialty tool rear seal remover

882
DT-50290
installer, outer bearing

883
DT-48734
replacer, extension housing bushing

884
EN-48266
injector seal

885
DT-48094
shaft installation guide

886
J-37281-A
remover, injector

887
EN-46745-4
piston pin clip pepl adapter

888
J-26941
bearing & seal remover

889
J-45124-10
puller leg set, GM Dealer

890
DT-48146
pinion cartridge press support

891
multiple
DT-48074, 48075, 48076

892
EN-48803
installer, camshaft oil seal

893
J-08614-20
bolts, output flange retaining

894
DT-49027
coil pin replacer

895
DT-49267
Alignment arbor, clutch

896
J-46629
axle seal installer

897
J-41480-5
front & rear cover mod template

898
EN-48313
timing chain retainer

899
DT-48094
shaft installation guide

900
multiple
Hypertech power programmer, data update CDs, essential tool shipment, and more

901
DT-51791
front cover removal adapters

902
EN-48898
supercharger lifting fixture


904
EN-48589-A
crankshaft hub socket

905
EN-46106
flywheel holder

906
J-45019
pinion cartridge remover

907
DT-50802
installer, output shaft grease can

908
J-29184
oil seal installer

909
EN-46112
tensioner retraction pins (set of 3)

910
EN-46109
guide pin set

911
EN-46121
connecting rod, guide pin set

912
EN-47966
camshaft position actuator valve seal remover

913
EN-46104
water pump pulley holder

914
EN-46117
valve stem key remover and installer

915
EN-46116
valve stem seal remover and installer

916
KM-6263
SAC clutch remover installer tool

917
Books
GM Service Manuals & Bulletins

919
EL-47955-1
Loopback Adapter, GM Lock-Tite,

920
EL-50115
Battery Lift Adapter

921
EL-48264-A
Battery pack lifting adapter

922
J-43690
rod bearing check tool adapter

923
J-36462-A
engine support adapter

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Chevrolet Dealership Liquidation #2
 Online Only Auction
Auction Date(s)
Bidding Starts: Thursday Aug 2
Bidding Ends: Tuesday Aug 21
Auction Location

Cordell, OK 73632
Company
United Country Heard Auction & Real Estate, LLC

Phone: 580-323-6120
Website: www.ucheardauction.com

Listing Terms and Conditions
The following terms and conditions apply to all auctions conducted by United Country Heard Auction and Real Estate, it's employees, agents, and assigns (Auctioneer), and any participants, their employees, agents, and assigns (Bidder), in said auctions, unless otherwise stipulated by the Auctioneer within any additional terms and conditions specifically expressed in regard to any single auction. By registering for, and participating in, this auction, Bidder acknowledges these terms and conditions and consents to abide by them, as well as any other/additional terms and conditions expressed specifically elsewhere within any auction listing. Terms and Conditions: 1. GENERAL AUCTION INFORMATION a) ALL ITEMS on the auction sell subject to the Auction Co.'s acceptance or rejection of the high bid. b) All items sold at auction conducted by Auctioneer are sold strictly on an "as-is-where-is" basis (shipping, packing, and/or loading are not included). c) Auctioneer and/or its consignor(s) reserve the right to add, delete, or alter any auction item prior to the opening of the auction. d) Neither the Auctioneer, nor its consignor(s), will recognize, or be held liable for, any claims for theft, damage, or loss once an item has been awarded and Bidder payment has been received. e) Auctioneer DOES NOT SHIP ALL items. Bidder is responsible for any/all shipping costs assessed by the auctioneer, when available. All non-shipped items must be picked up from auction site by Bidder, or authorized Bidder representative, at designated date and time. See Auction info for specific auction details. f) Items not picked up by Bidder, or authorized Bidder representative, within stipulated time frame, regardless of payment, will be subject to a storage rate of ($10) per item, per day, and may be re-sold, at Auctioneer's sole discretion, to pay for storage costs. 2. PURCHASES/FEES a) All sales are final and no sale shall be invalidated. There are no returns or refunds, and credit payments cannot be reversed. b) A thirteen percent (13%) Buyers Premium will be applied to ALL purchases. c) ALL internet/online purchases may be subject to a per-item internet/handling fee. The auctioneer will list this fee, when applicable, in the shipping/pickup information section of the auction listing. d) All funds are to be paid in USD. Bidder is responsible for and agrees to pay, all duties, custom, taxes, and any other fees associated with the purchase of any item. e) Bidder agrees to pay for all items before removing any items from the auction site. 3. PAYMENT a.) All purchases must be paid in full by end of auction. Acceptable method of payment is by credit card. All funds will be paid in USD. (13%) Buyer's Premium will be applied to ALL purchases. b.) Bidder is responsible for and agrees to pay, all duties, custom, taxes, and any other fees associated with the purchase of any item. All sales are final, and no sale shall be invalidated. There are no returns or refunds, and credit payments cannot be reversed. c.) Buyers will be charged 9.5% tax on all items purchased. 4. ITEM DESCRIPTIONS a) Neither the Auctioneer nor its consignor(s), make any guarantees, warranties or representations, expressed or implied, with respect to the property being sold, except as to the warranty of title. All implied warranties of merchantability, and/or fitness for purpose, are specifically disclaimed by the Auctioneer and its consignor(s). b) Specifically, neither the Auctioneer, nor its consignors, makes any representation or warranty of any kind, expressed or implied, with respect to any of the following characteristics of property: age, authenticity, genuineness, attribution, provenance, origin, physical condition, importance, size, quality, quantity, rarity, value exhibitions, historical references or significance, medium, material, culture, or source origin. c) All information within any catalog, sale bill, auction listing, advertising, website, or elsewhere is offered to the Bidder as a statement of opinion only. It is not intended to contain statements of fact for which the Auctioneer or its consignor(s) may be held liable. This disclaimer of liability on the Auctioneer's part applies whether the information is included in any catalog, sale bill, or website, and extends any advertisements, announcements, or communications through our representatives, bills of sale, or elsewhere, and regardless of whether written or oral. d) Neither the Auctioneer nor its consignor(s), shall be responsible for the correctness or accuracy of descriptions or other information in any catalog or elsewhere. The Bidder assumes full responsibility to inspect and to evaluate the property to its, his, or her, complete satisfaction prior to any bid or purchase. The Bidder agrees to make an independent judgment about the property, the property's value, and/or property descriptions or any other information about the property, and to bid accordingly. e) The Auctioneer may, without in any way diminishing any disclaimers of liability contained in these terms and conditions, and elsewhere, mention within the description of an item or lot, some significant damage, though this may or may not include all faults, imperfections, and/or restorations. f) The Bidder agrees not to base a bid solely upon information provided by the Auctioneer, or its consignor(s). 5. ONLINE AUCTIONS a) Auctioneer shall not be responsible for internet outages, service disruptions, data lag, or other failures of Bidder's bid placed via the internet. The auctioneer may or may not honor such adversely affected bid attempts, at Auctioneer's sole discretion. b) Auctioneer reserves the right, at Auctioneer's sole discretion, to cancel and/or reopen the auction in the case of system failures. 6. LIABILITY a) Safety of operation of any electrical or otherwise powered devices or items sold is not warranted, or guaranteed, in any way. Auctioneer recommends that all electrical or otherwise powered items sold be checked, installed, and or operated by a licensed electrician or other appropriate technician. b) Items sold could, or could not, meet current, or any other, safety standards. Certain items could subject the operator or installer to various hazards, including, but not limited to, non-polarized plugs, lack of grounding conductors, and/or guards missing, malfunctioning, or not acceptable by modern safety standards. Bidder assumes all responsibility to check with appropriate authorities having jurisdiction regarding any/all local codes regarding such devices. Bidder assumes any and all liability for any installation and/or operation of any item purchased. c) Vintage items are sold with a primary use as collector's items, solely intended for display purposes only and, as such, are not recommended for any other practical use. Vintage items could, or could not, meet any safety standards, could be coated with lead paint, could contain lead, or could be made entirely of lead, and also could contain phthalates, or present choking hazards. Bidder agrees, in compliance with the Consumer Product Safety Improvement Act, to buy vintage items as collectibles for display purposes only, and with no intention of using them, selling them to be used, or of allowing them to be used otherwise. Bidder further agrees to assume all liability and responsibility, and to hold harmless the seller and/or the Auctioneer, in the event of injury, harm, or death to anyone as a result of improper use of any item purchased at auction. Bidders must be over 18 years of age. d) Bidders agree that they, and their guests, are attending the auction sale at the Bidder's own risk, exclusively, and agree to indemnify, save and hold harmless the Auctioneer, and its seller(s) and/or consignor(s), from any and all accidents and/or injuries they may receive while attending the auction sale and/or during pickup of auction items. 7. PARTIAL PAYMENT/ NON-PAYMENT a) Any Bidder who does not pay in full upon presentment of an auction invoice is subject, at the discretion of Auctioneer or its consignor(s), to being barred from any future participation in auctions conducted by Auctioneer. b) Auctioneer reserves the right to void an invoice if payment in full is not received within specified time limits. In cases of nonpayment, Auctioneer's election to void a sale does not relieve the Bidder from its obligation to pay the Auctioneer's fees (seller's and buyer's premium) due on the lot(s), and/or any other damages pertaining to the lot(s). c) In the event that Bidder's payment is dishonored upon presentment(s), Bidder shall pay the maximum statutory processing fee set by applicable State of Oklahoma law. d) If any auction invoice submitted by Auctioneer is not paid in full when due, the unpaid balance will bear interest at the highest rate allowed by law from the date of invoice until paid. Any invoices not paid when due will be subject to a three percent (3%) late fee on the invoice amount, or three percent (3%) of any installment that is past due, should payment be accepted on a past-due invoice. e) If Auctioneer refers any invoice to an attorney for collection, the Bidder agrees to pay all attorney fees, court costs, and/or any other collection costs incurred by Auctioneer. If Auctioneer assigns collection to in-house legal staff, such attorney's time expended on the matter shall be compensated at a rate comparable to the hourly rate of independent attorneys. f) In the event a successful Bidder fails to pay any amount due, Auctioneer, at its sole discretion, reserves the right to sell the lot(s) securing the invoice to any under-bidders in the auction in which the lot(s) appeared, or in subsequent private or public sale, or to re-list the lots in a future auction conducted by Auctioneer. The defaulting Bidder agrees to pay for the reasonable costs of resale (including a 35% seller's commission, if consigned to an auction conducted by Auctioneer). The defaulting Bidder is further liable to pay any difference between his/her/its total original invoice for the lot(s), plus any applicable interest, and the net proceeds for the lot(s), if sold at private sale, or the subsequent hammer price of the lot(s), less the 35% seller's commission, if sold at an Auctioneer's auction. g) Auctioneer shall have a lien against the merchandise purchased by the Bidder to secure payment of the auction invoice. Auctioneer is further granted a lien and the right to retain possession of any other property of the Bidder then held by the Auctioneer or its affiliates, to secure payment of any auction invoice or any other amounts due the Auctioneer or its affiliates from the Bidder. h) With respect to payment of auction invoices, the Bidder waives any and all rights of offset he/she/it might otherwise have against the Auctioneer and/or the consignor of the merchandise included on the invoice. If a Bidder owes Auctioneer or its affiliates on any account, Auctioneer and its affiliates shall have the right to offset such unpaid account by any credit balance due the Bidder, and it may secure, by possessory lien, any unpaid amount by any of the Bidders property then held in the Auctioneer or its affiliates' possession. 8. DISPUTES/ARBITRATION a) Auctioneer shall designate the winning bidder after each item is auctioned. Should any dispute arise between two (2) or more Bidders, regarding any matter, Auctioneer reserves the right, and the Bidders grant Auctioneer the right (solely at Auctioneer's discretion), to re-open bidding on the item in question, and/or to resolve any/all questions through the identification, or designation, of the winning bidder and/or the amount of the winning bid. b) Auctioneer and Bidder hereby agree to submit any dispute between Auctioneer and Bidder, arising out of, or relating to, this agreement, to an arbitration panel of three (3) neutral person selected by Auctioneer. If Bidder disapproves of the panel, Bidder shall, within ten (10) days after receiving notice of selection of the panel, initiate arbitration before the American Arbitration Association (AAA), using its rules for commercial arbitrations, with the exception that all AAA fees shall be paid by Bidder. c) If Bidder fails to timely initiate arbitration through AAA, or to pay AAA fees and costs, Auctioneer may resume arbitration through a neutral arbitration panel selected by Auctioneer. d) The decision of arbitration will be final and binding on all parties. 9. LEGAL ACTIONS a) Notwithstanding anything contained in this agreement to the contrary, Auctioneer hereby reserves the right to seek any action against Bidder in a court of competent jurisdiction b) Any action or suit of any kind relating to this agreement must be commenced within one (1) year from the date when the cause of action or claim accrued, or it shall be forever barred. The right of action or suit shall accrue, and the one-year limitation shall begin to run, at the date upon which the breach, damage, or injury is sustained, and not when the resulting cost, damage, harm, or loss is discovered. c) Auctioneer shall not under any circumstances be liable to Bidder for any consequential damages to Bidder, and Bidder shall not hold Auctioneer liable for failure of any successful Bidder to complete transaction. d) Bidder agrees to be responsible for any and all attorney's fees and/or collection fees incurred by seller or Auctioneer as a result of any disputes or actions brought on by Bidder with regard to any auction or auction item. 10. SALES TAX a) When sales tax is applicable, Bidder agrees to pay the Auctioneer the actual amount of tax due in any event where sales tax is not properly collected due to an expired, inaccurate, inappropriate text certificate or declaration, or due to any incorrect interpretation of the applicable statute, or due to any other reason. b) When sales tax is applicable, the appropriate forms or certificate must be on file with and verified by, the Auctioneer five (5) days prior to the auction, or sales tax must be paid. Only if such form or certificate is received by the Auctioneer within four (4) days after the auction, can a refund of sales tax paid be made. Lots originating from different auctions may not be aggregated for sales tax purposes. c) Any motor vehicles offered for sale or subject to any and all applicable state titling and tax laws. Bidder agrees to be responsible for complying with these laws. 11. GOVERNING LAW & JURY WAIVER a) This agreement shall be governed by, and construed in accordance with, the laws of the State of Oklahoma, and any action or proceeding arising hereunder shall be brought in the courts of the State of Oklahoma. b) If any such action or proceeding arises under the Constitution, laws, or treaties of the United States of America, or if there is a diversity of citizenship between the parties hereto, so that suit may be brought in a United States District Court, it shall be brought to the United States District Court in Arapaho, Oklahoma. c) The invalidation of one or more terms of this agreement shall not affect the validity of the remaining terms. d) Auctioneer and its seller(s) hereby waive the right to any jury trial in any action, proceeding, or counterclaim in connection with this agreement brought by either party against the other party. 12. SEVERABILITY Except as expressly provided to the contrary herein, each section, part, term and/or provision of this agreement shall be considered severable; and if, for any reason any section, part, term or provision herein is determined to be invalid, unenforceable or contrary to, or in conflict with, any existing or future law or regulation by a court or agency having valid jurisdiction, such shall not impair the future operation of, or have any other effect upon, such other sections, parts, terms and provisions of this agreement as may remain otherwise intelligible, and the latter shall continue to be given full force and effect and bind the parties hereto; and said invalid or unenforceable sections, parts, terms or provisions shall be deemed to be replaced with a provision that is valid and enforceable and most merely reflects the original intent of the invalid or unenforceable provision.
Chevrolet Dealership Liquidation. This is the second of two personal property auctions selling the GM specialty tools from a Chevrolet dealership in Cordell, OK. There are hundreds of Kent-Moore specialty tools for sale.

1
Bidding is open from Aug. 2nd thru Aug. 21st
*Online bidding begins Thursday, Aug. 2nd at 8:00 am CDT *Bids begin closing Tuesday, Aug 21st at 6:00 pm CDT; all items have a 3-minute soft close and are set to close every 20 seconds.

2
Pickup Location & Dates
*Pick up is on Wednesday, August 22nd from 10:00 am to 3:00 pm (CDT) or on Friday, August 24th from 8:00 am to 1:00 pm (CDT). *Winning Bidders can pick up their purchases at 1707 Glenn English Street, Cordell, OK 73632. *There will not be a pickup ...

595
J-42873
fuel line shutoff adapters

596
J-45517
ball joint installation spacer

597
J-45108
plate, gauge

598
CH-48809
torsion bar unloader

599
J-45001-1
Fuel tank hose

600
J-45027
timing chain tension holder

601
J-45057-2
lower engine support bar

602
J-45059
torque angle adapter

603
J-45101-100
brake rotor run out washers

604
J-45103
axle shifter remover adapters

605
J-45124
puller bridge

606
J-45201
cooler line seal remover

607
J-45184
differential ouput shaft oil seal installer

608
J-45222
axle housing spreader

609
J-45096-30
flush adapter, transflow

610
GE-45126-5
replacement tip set 90 deg.

611
DT-47773
retaining ring pliers adapter

612
GE-45126-5
replacemnet tip set 90 deg.

613
J-45224
side bearing adjuster

614
J-45225
differential seal installer

615
J-45228
pinion bearing race replacer

616
J-45230
pinion setting gauge block

617
J-45231
side bearing instaler

618
J-45232
left needle bearing replacer

619
J-45233
Right needle bearing replacer

620
J-45234
pinion remover

621
J-45235
tone ring installer

622
J-45236
seal instaler and protector

623
J-45237
thrust bearing installer

624
J-45238
thrust bearing installer

625
J-45239
needle bearing instaler

626
J-45265
rear knuckel bushing remover/installer

627
J-45268-117
txv adapter

628
J-45268-121
txv flush adapter

629
J-45341
remover, axel shaft

630
J-45342
axle deflector installer ( 1 pair)

631
J-45358
transfer case housing separator Dp453

632
J-45359
right output shaft seal installer

633
J-45379
output shaft seal installer

634
J-45382
transfer case torque check adapter

635
J-45398
forward clutch inner seal remover

636
J-45399
brake booster adapter

637
J-4540
transmission indicator alignment tool

638
J-45515
brake caliper piston boot seal installer

639
J-45531
axle cv joint remover adapter

640
J-45548
mainshaft support bushing/bearing remover

641
J-45549
mainshaft support bearning instaler

642
J-45706
DANA 70HD/80 Inner pinion bearing race remover

643
J-45725
cradle bushing replacer

644
J-45381
output shaft seal installer

645
J-45758
vavle leash adjusting tool

646
J-45798
steering gear thrust bearing protector tool

647
J-45849
remover, bearing/bushing

648
J-45851
ball joint separator adapters

649
J-45853
wheel bearing & seal installer

650
J-45857
wheel bearing remover

651
J-45860
vses tone ring installer

652
J-45861
ect sensor socket

653
J-45863
caliper piston seal installer

654
J-45830
replacer, bushing

655
J-44870
driveshaft carrier bearing instaler

656
J-45872
brake accumulator piston compressor

657
J-45910
injector tube remover

658
J-45920
car set bracket reshaper

659
J-45930
rear main seal installer

660
J-45938
wheel alignment socket

661
J-45938
alignment socket

662
J-45951
front cover seal installer

663
EN-46119
vavle spring compressor adapter (off vehicle)

664
J-46165
front cover guide pin installation tool

665
EN-46359
puller end protector

666
J-46363
fuel line release tool

667
J-46409
torque converter alignment handle

668
DT-47778
center support retaing ring

669
EN-46577
oxygen sensor remover installer

670
J-46588
axle seal crimp tool

671
J-46594
injector removal tool

672
J-46607
clutch disc and pump rotator aligner

673
EN-46999-1
loma aie pressure adapter

674
GE-47676
HVAC module puller

675
EN-46330
tension retaining pin

676
DT-47562
flywheel holder

677
EL-47564
steering diagnostic harness

678
EN-47719
tensioner compressor

679
DT-47561
bushing, seal installer

680
EN-47589
fuel pressure test adapter

681
DT-47605
trans holding fixture adapter

682
EN-47623
rear main seal installer

683
EN-47699
flywheel holding tool

684
EL-47728
steering column lock actuator

685
DT-47731
engine coil cooler release tool

686
J-42628
spring compressor plate

687
J-42675
flat wire probe adapter

688
J-42737
sector bearing installer

689
J-42738
front output shaft seal installer

690
J-42759
IGN switch conn release tool

691
J-42841
rear oil seal remover

692
J-42842
rear crankshaft oil seal installer

693
J-42863
vavle seal installer

694
J-42872
fill limiter vent vavle remover

695
J-42873
fue line shutoff adapters

696
J-42882
p/s adjuster nut wrench

697
J-42960
fuel tank siphoning hose

698
J-42940
fuel tank torque wrench (3mm)

699
J-42943
drive axle separator

700
J-42982
fuel pressure adapater

701
J-42991
strut rod socket

702
J-43010
balancer puller adapter

703
J-43070
Oil Pressure adapter

704
J-43031
engine life bracket

705
J-43032
crankshaft socket

706
J-43059
vavle keeper r/i

707
J-43074
spring compressor

709
J-43094
spark plug boot puller

710
J-43114
abs plug octoganal set

711
J-43181
heater line quick connect release

712
J-43184
valve spring compressor adapter

713
J-43204
valve guide seal installer

714
J-43241
remote keyless entry tester

715
J-43244
relay puller

716
J-43288
fill limiter vent vavle tool

717
J-43298
ignition module tester

718
J-43298-40
ignition module test harness

719
J-43300
torque rod adjuster GM specialty tool

720
J-43425
output haft load tool adapter

721
J-43435
p/s adjuster locknut wrench

722
J-43442
flywheel holder

723
J-43604
extractor

724
J-43649-10
valve spring compressor adapter set

725
J-43648
evap pressure/purge fitting

726
J-43649
valve spring compressor (on car)

727
J-43484
output shaft seal installer

728
J-43650
balance shaft bearing rem & installer

729
J-43651
water pump holding tool

730
J-43653
flywheel holding tool

731
J-43655
sprocket holding tool

732
J-43708
ims alignment plate

733
J-44732
output shaft seal installer

734
J-43773
valve body spring compressor

735
J-43799
breakout box adapter

736
J-43822
shock support tool

737
J-43845
pressure gauge adapter

738
J-43846
air pressure regulator

739
J-43847
differential adapter

740
J-43885
caliper seal installer

741
J-43921-B
tool organizer cd-rom

742

743
J-43931
diesel pump control unit remover & installer

744
J-43963
valve spring compressor (off car)

745
J-43965
timesert extensions

746
J-44015
steering linkage installer

747
J-44089
master cylinder bleeder cap adapter

748
J-44152
jumper harness

749
J-44211
on car valve spring compressor

750
J-44212
camshaft holding tool

751
J-44213
sprocket holding tool

752
J-44214
flywheel holding tool

753
J-44215
rear main seal installer

754
J-44228-3
valve spring compressor adapter (on vehicle)

755
J-44217
chain holder set

756
J-44246
solenoid teting kit

757
J-44220-upd
update kit

759
J-44246-10
Solenoid test cable

760
J-44284
fuel door check valve opener

761
J-44298
air bag release tool

762
J-44338
high current probes

763
J-44339
reverse synchonizer installer

764
J-44340
bearing insstaller

765
J-44363
sunroof alignment pins

766
J-44394
axle seal protector (10)

767
J-44427
spanner wrench

768
J-44465
transmission holding fixture adapter

769
J-44467
Output shaft puller adaptor

770
J-44472
end play measuring tool

771
J-44485
brake booster rod adjuster

772
J-44536-1
and J-44536-2

773
J-44538
torx 30 plus socket

774
J-44540
bearing/tone ring installer

775
J-44570-A
bushing replacer

776
J-44571
front clutch seal protector

777
J-44586
p/s seal remover/installer

778
J-44602
injector tester

779
J-44603
noid light

780
J-44721-20
p/s analyzer GEO adapters

781
J-44664
1/2 inch drive crowsfoot wrench 33mm

782
J-44665-2
time rod spanner

783
J-44685
rear axle seal and bearing remover

784
J-44714-A
pinion bearing replacer

785
J-44723
Allison transmission adapter plate

786
J-44732
output shaft seal installer

787
J-44811
unloader, belt tensioner

788
J-44747
clutch alignment arbor

789
J-44748
seal remover

790
J-44766
seal remover

791
J-44827
trans. Clr. Quick disconnect

792
J-44851
pinion shaft seal installer

793
J-44852
front clutch pack seal instaler

794
J-44866
support bushing remover instaler

795
J-44872
pinion shaft seal installer

796
J-44873-2
pinion flange holder and remover bolt

797
J-44882
pinion remover

798
J-44887
oil filter cap tool

799
J-44894-A
brake bleeder adapter set

800
CH-49794
axle hub nut socket

801
DT-50289
installer, hub seal

802
DT-50291
installer, outer hub bearing

803
DT-50292
installer, inner bearing cup

804
J-45096-40
flexible fluid filler transmission

805
EN-51380
rear main seal installer tool

806
EN-49204
crankshaft rear oil seal installer

807
KM-454-B
remover/installer

808
DT-47735
Holder, flange

809
DT-50648-A
seal installer transfer case input shaft

810
J-45859
driveshaft and hub remover

811
CH-47960-10
Caster Gauge adapter

812
J-45010
installer, bearing

813
DT-51255
bearing cup remover

814
J-41665-1A
installer

815
J-41479-10
installer, rear crank seal

816
EN-51097
clip, injector retaining

817
EL-48571-30
adapter HV pinout box

818
DT-51175
aligner, neutral range switch

819
DT-47791-B
installer, torque converter hub seal

820
EN-48278
fuel pump lock ring tool

821
DT-51381
Tool, ELSD bleed

822
EN-50172
front crank seal installer

823
GE-41415-60
adapter, induction system/evap leak test

824
CH-50168-A
puller, steering wheel

825
EN-50791
injector to rail installer

826
EN-49248
assembly, injector rail

827
DT-50871
installer, pinion seal

828
EN-51092
gauge, fuel pump alignment

829
EN-51105
installer/sizer, injector seal

830
EN-51096
remover, rear crank seal

831
CH-37287-1A
adapter, fuel pressure 3/8"

832
J-45096-55
transmission cooler flusher machine adapter hoses

833
DT-22888-60
puller adapter set

834
EN-28467-301
support adapter

835
DT-51076
bearing & gear installer

836
DT-50302-A
lifter, rotor assembly

837
multiple
DT-50955, CH-50377, J-45747, EN-50175, CH-50375, DT-46496, EN-46333, CH-49240-2, CH-50378, CH-49240-1A, CH-49240-3, DT-50199, J-43966, J-39802

838
GE-50576-A
Tester, acousticbelt tension

839
multiple
EN-46999-15, EN-51091, EN-46999, 48059, EN-46999-18, DT-48145, EN-50171, CH-50559

840
multiple
EN-48488, 50790, 50837, 50792, 50656, 50793, 50820, J-43405-2, 43405-1, 42067-A, 28467-500, KM-6179, 960, 235-6

841
EN-28467-40
support brackets

842
books
service manuals

843
J-44551-50
a/c suction screen svc kit

844
DT-51076-10
installer adapter kit

845
CH-47976
active fuel injector tester

846
CH-48358
control arm bushing replacer

847
KM-658-1
rear main seal installer

848
EN-47639
Rear crank protector

849
EN-46114
engine lift brackets

850
CH-47672-A
cradle bushing replacer

851
DT-47825-20
harness, techm jumper

852
DT-47734
speed sensor harness tether

853
EN-46999-6
air pressure adaptor

854
J-45725-A
bushing installer

855
EN-51632
retainer, camshaft

856
J-38522-A
vehicle signal generator

857
J-33432
leaf spring compressor

858
EN-46109
guide pin set

859
EN-46104
water pump holding tool

860
EN-48383
camshaft retaining tool

861
EN-48589-A
socket,crankshaft hub

862
EN-51267
Aligner, oil pump housing

863
DT-51323
installer, differential seal

864
CH-48096
EVAP access port tool

865
DT-50649
install, front output seal

866
EN-48268
main bearing cap remover

867
EN-4610
spark plub tube seal guide

868
J-24254-A
installer, rear axle seal

869
DT-48550
remover, manual shaft pin

870
DT-48021
installer, sector bearing

871
DT-48210
installer, seal

872
KM-527-A
transmission linkage adjuster adjustment sliver tool

873
multiple
DT-47540, 47541, 47542, 47543, DW-340-120-01, -02, -03, -04

874
J-41816-3
puller legs

875
DT-48077 & 8
installer, output flange

876
EN-48869
front crankshaft seal install

877
EN-48260
piston ring compressor

878
multiple
DT-48802, DT-48827, J-39441

879
EN-46110
Valve spring compressor

880
EN-48585
balancr installation guide

881
EN-48672-1
specialty tool rear seal remover

882
DT-50290
installer, outer bearing

883
DT-48734
replacer, extension housing bushing

884
EN-48266
injector seal

885
DT-48094
shaft installation guide

886
J-37281-A
remover, injector

887
EN-46745-4
piston pin clip pepl adapter

888
J-26941
bearing & seal remover

889
J-45124-10
puller leg set, GM Dealer

890
DT-48146
pinion cartridge press support

891
multiple
DT-48074, 48075, 48076

892
EN-48803
installer, camshaft oil seal

893
J-08614-20
bolts, output flange retaining

894
DT-49027
coil pin replacer

895
DT-49267
Alignment arbor, clutch

896
J-46629
axle seal installer

897
J-41480-5
front & rear cover mod template

898
EN-48313
timing chain retainer

899
DT-48094
shaft installation guide

900
multiple
Hypertech power programmer, data update CDs, essential tool shipment, and more

901
DT-51791
front cover removal adapters

902
EN-48898
supercharger lifting fixture

903

904
EN-48589-A
crankshaft hub socket

905
EN-46106
flywheel holder

906
J-45019
pinion cartridge remover

907
DT-50802
installer, output shaft grease can

908
J-29184
oil seal installer

909
EN-46112
tensioner retraction pins (set of 3)

910
EN-46109
guide pin set

911
EN-46121
connecting rod, guide pin set

912
EN-47966
camshaft position actuator valve seal remover

913
EN-46104
water pump pulley holder

914
EN-46117
valve stem key remover and installer

915
EN-46116
valve stem seal remover and installer

916
KM-6263
SAC clutch remover installer tool

917
Books
GM Service Manuals & Bulletins

919
EL-47955-1
Loopback Adapter, GM Lock-Tite,

920
EL-50115
Battery Lift Adapter

921
EL-48264-A
Battery pack lifting adapter

922
J-43690
rod bearing check tool adapter

923
J-36462-A
engine support adapter